A miniaturized, flexible, and low-cost capillary ion chromatography system has been developed for anion analysis in water. The ion chromatography has an open platform, modular design, and allows for ease of modification. The assembled platform weighs ca. 0.6kg and is 25×25cm in size. Isocratic separation of common anions (F- , Cl- , NO2- , Br- , and NO3- ) could be achieved in under 15min using sodium benzoate eluent at a flow rate of 3 μL/min, a packed capillary column (0.150×150mm) containing Waters IC-Pak 10μm anion exchange resin, and light-emitting diode based indirect UV detection. Several low UV light-emitting diodes were assessed in terms of sensitivity, including a new 235nm light-emitting diode, however, the highest sensitivity was demonstrated using a 255nm light-emitting diode. Linear calibration ranges applicable to typical natural water analysis were obtained. For retention time and peak area repeatability, relative standard deviation values ranged from 0.60-0.95 and 1.95-3.53%, respectively. Several water samples were analysed and accuracy (recovery) was demonstrated through analysis of a prepared mixed anion standard. Relative errors of -0.36, -1.25, -0.80, and -0.76% were obtained for fluoride, chloride, nitrite, and nitrate, respectively.