Iron Oxide Nanocubes Research Articles

Gold-loaded nanoporous iron oxide nanocubes: a novel dispersible capture agent for tumor-associated autoantibody analysis in serum.

Autoantibodies are produced against tumor associated antigens (TAAs) long before the appearance of any symptoms and thus can serve as promising, non-invasive biomarkers for early diagnosis of cancer. Current conventional methods for autoantibody detection are highly invasive and mostly provide diagnosis in the later stages of cancer. Herein we report a new electrochemical method for early detection of p53 autoantibodies against colon cancer using a strategy that combines the strength of gold-loaded nanoporous iron oxide nanocube (Au@NPFe2O3NC)-based capture and purification while incorporating the inherent simplicity, inexpensive, and portable nature of the electrochemical and naked-eye colorimetric readouts. After the functionalisation of Au@NPFe2O3NC with p53 antigens, our method utilises a two-step strategy that involves (i) magnetic capture and isolation of autoantibodies using p53/Au@NPFe2O3NC as 'dispersible nanocapture agents' in serum samples and (ii) subsequent detection of autoantibodies through a peroxidase-catalyzed reaction on a commercially available disposable screen-printed electrode or naked-eye detection in an Eppendorf tube. This method has demonstrated a good sensitivity (LOD = 0.02 U mL-1) and reproducibility (relative standard deviation, %RSD = <5%, for n = 3) for detecting p53 autoantibodies in serum and has also been successfully applied to analyse a small cohort of clinical samples obtained from colorectal cancer. We believe that the highly inexpensive, rapid, sensitive, and specific nature of our assay could potentially aid in the development of an early diagnostic tool for cancer and related diseases.

Gold-loaded nanoporous superparamagnetic nanocubes for catalytic signal amplification in detecting miRNA.

This paper reports the development of a nonenzymatic, amplification-free, and sensitive platform for the detection of microRNA based on a new class of electrocatalytically active superparamagnetic gold-loaded nanoporous iron oxide nanocubes (Au@NPFe2O3NC). The assay showed an excellent detection sensitivity down to 100 fM and specificity towards the analysis of miR-21 in cell lines and tissue samples derived from patients with oesophageal squamous-cell carcinoma (ESCC).

Following the Assembly of Iron Oxide Nanocubes by Video Microscopy and Quartz Crystal Microbalance with Dissipation Monitoring.

We have studied the growth of ordered arrays by evaporation-induced self-assembly of iron oxide nanocubes with edge lengths of 6.8 and 10.1 nm using video microscopy (VM) and quartz crystal microbalance with dissipation monitoring (QCM-D). Ex situ electron diffraction of the ordered arrays demonstrates that the crystal axes of the nanocubes are coaligned and confirms that the ordered arrays are mesocrystals. Time-resolved video microscopy shows that growth of the highly ordered arrays at slow solvent evaporation is controlled by particle diffusion and can be described by a simple growth model. The growth of each mesocrystal depends only on the number of nanoparticles within the accessible region irrespective of the relative time of formation. The mass of the dried mesocrystals estimated from the analysis of the bandwidth-shift-to-frequency-shift ratio correlates well with the total mass of the oleate-coated nanoparticles in the deposited dispersion drop.

Iron Oxide Nanocubes for Photocatalytic Degradation and Antimicrobial Applications

Iron Oxide Nanocubes for Photocatalytic Degradation and Antimicrobial Applications

Multicomponent, peptide-targeted glycol chitosan nanoparticles containing ferrimagnetic iron oxide nanocubes for bladder cancer multimodal imaging.

While current imaging modalities, such as magnetic resonance imaging (MRI), computed tomography, and positron emission tomography, play an important role in detecting tumors in the body, no single-modality imaging possesses all the functions needed for a complete diagnostic imaging, such as spatial resolution, signal sensitivity, and tissue penetration depth. For this reason, multimodal imaging strategies have become promising tools for advanced biomedical research and cancer diagnostics and therapeutics. In designing multimodal nanoparticles, the physicochemical properties of the nanoparticles should be engineered so that they successfully accumulate at the tumor site and minimize nonspecific uptake by other organs. Finely altering the nano-scale properties can dramatically change the biodistribution and tumor accumulation of nanoparticles in the body. In this study, we engineered multimodal nanoparticles for both MRI, by using ferrimagnetic nanocubes (NCs), and near infrared fluorescence imaging, by using cyanine 5.5 fluorescence molecules. We changed the physicochemical properties of glycol chitosan nanoparticles by conjugating bladder cancer-targeting peptides and loading many ferrimagnetic iron oxide NCs per glycol chitosan nanoparticle to improve MRI contrast. The 22 nm ferrimagnetic NCs were stabilized in physiological conditions by encapsulating them within modified chitosan nanoparticles. The multimodal nanoparticles were compared with in vivo MRI and near infrared fluorescent systems. We demonstrated significant and important changes in the biodistribution and tumor accumulation of nanoparticles with different physicochemical properties. Finally, we demonstrated that multimodal nanoparticles specifically visualize small tumors and show minimal accumulation in other organs. This work reveals the importance of finely modulating physicochemical properties in designing multimodal nanoparticles for bladder cancer imaging.

Massive Intracellular Biodegradation of Iron Oxide Nanoparticles Evidenced Magnetically at Single-Endosome and Tissue Levels.

Quantitative studies of the long-term fate of iron oxide nanoparticles inside cells, a prerequisite for regenerative medicine applications, are hampered by the lack of suitable biological tissue models and analytical methods. Here, we propose stem-cell spheroids as a tissue model to track intracellular magnetic nanoparticle transformations during long-term tissue maturation. We show that global spheroid magnetism can serve as a fingerprint of the degradation process, and we evidence a near-complete nanoparticle degradation over a month of tissue maturation, as confirmed by electron microscopy. Remarkably, the same massive degradation was measured at the endosome level by single-endosome nanomagnetophoretic tracking in cell-free endosomal extract. Interestingly, this spectacular nanoparticle breakdown barely affected iron homeostasis: only the genes coding for ferritin light chain (iron loading) and ferroportin (iron export) were up-regulated 2-fold by the degradation process. Besides, the magnetic and tissular tools developed here allow screening of the biostability of magnetic nanomaterials, as demonstrated with iron oxide nanocubes and nanodimers. Hence, stem-cell spheroids and purified endosomes are suitable models needed to monitor nanoparticle degradation in conjunction with magnetic, chemical, and biological characterizations at the cellular scale, quantitatively, in the long term, in situ, and in real time.

Handheld energy-efficient magneto-optical real-time quantitative PCR device for target DNA enrichment and quantification

A PCR provides not only valuable genetic information that enables precise differential disease diagnosis but also quantitative data to assess various clinical states. We report the successful integration of novel dual-mode magnetic Fe3O4 nanoclusters that deliver photothermal conversion. The clusters can be excited with pulsed laser light for precision thermal cycle modulation to develop an ultrafast quantitative PCR system. Traditional PCR heats and cools the sample from outside the PCR tube; the heat needs to pass through the heat block, tube wall and transfer to the DNA through water molecules. In contrast, our system uses nanoparticles inside the liquid phase as numerous ‘nanoheaters’; thus the thermal transfer between particles and adjacent water or DNA molecules becomes extremely efficient because of proximity at the molecular level. Moreover, the defective mitochondrial DNA from cybrid cell lines of a patient with chronic progressive external ophthalmoplegia syndrome, a mitochondrial disease, was efficaciously detected. The system has a simple design, is extremely energy efficient and is faster than traditional qPCR. Our finding provides new insight into rapid and accurate quantitative diagnostics for future point-of-care applications. Iron nanoparticles play double duty as ‘nanoheaters’ for DNA amplification and as molecular manipulators in a new point-of-care prototype. Polymerase chain reaction (PCR) devices create multiple copies of small DNA strands for genetic testing, but usually require bulky heating and cooling mechanisms. Dar-Bin Shieh and colleagues from National Cheng Kung University in Taiwan have found that tiny clusters of iron oxide nanocubes can improve heat transfer in PCR devices by entering the liquid phase next to the target DNA. When irradiated by laser light, the iron nanoclusters release heat to precisely modulate DNA temperatures. Furthermore, functionalizing the nanoparticles with nucleotide probes enables them to attach to and extract specific disease-indicating mitochondria using magnetic fields. The portable, battery-powered prototype can wirelessly interface with tablet computers and is twice as efficient at isolating mitochondria as commercial kits. A novel dual-mode magnetic Fe3O4 nanoclusters was developed that exhibit efficient photothermal conversion and superparamagnetism. The particles served as numerous ‘nanoheaters’ in a PCR reaction mixture while enabling effective magnetic-based macromolecular manipulation. The thermal transfer between particles and adjacent water and DNA molecules thus become extremely efficient because of molecular-level proximity and allowed rapid amplification cycle progression. The defective mitochondrial DNA from cybrid cell lines of a patient with chronic progressive external ophthalmoplegia syndrome was efficaciously quantified by fluorescence intensity detection. Our finding provides new insight into rapid and accurate quantitative DNA diagnostics for future point-of-care applications.

Acidic pH-Triggered Drug-Eluting Nanocomposites for Magnetic Resonance Imaging-Monitored Intra-arterial Drug Delivery to Hepatocellular Carcinoma.

Transcatheter hepatic intra-arterial (IA) injection has been considered as an effective targeted delivery technique for hepatocellular carcinoma (HCC). Recently, drug-eluting beads (DEB) were developed for transcatheter IA delivery to HCC. However, the conventional DEB has offered relatively modest survival benefits. It can be difficult to control drug loading/release from DEB and to monitor selective delivery to the targeted tumors. Embolized DEBs in hepatic arteries frequently induce hypoxic and low pH conditions, promoting cancer cell growth. In this study, an acidic pH-triggered drug-eluting nanocomposite (pH-DEN) including superparamagnetic iron oxide nanocubes and pH-responsive synthetic peptides with lipid tails [octadecylamine-p(API-l-Asp)10] was developed for magnetic resonance imaging (MRI)-monitored transcatheter delivery of sorafenib (the only FDA-approved systemic therapy for liver cancer) to HCC. The synthesized sorafenib-loaded pH-DENs exhibited distinct pH-triggered drug release behavior at acidic pH levels and highly sensitive MR contrast effects. In an orthotopic HCC rat model, successful hepatic IA delivery and distribution of sorafenib-loaded pH-DEN was confirmed with MRI. IA-delivered sorafenib-loaded pH-DENs elicited significant tumor growth inhibition in a rodent HCC model. These results indicate that the sorafenib-pH-DENs platform has the potential to be used as an advanced tool for liver-directed IA treatment of unresectable HCC.

External Magnetic Field-Induced Targeted Delivery of Highly Sensitive Iron Oxide Nanocubes for MRI of Myocardial Infarction.

Magnetic field responsive nanocubes (MFRFs) are synthesized as nanoplatforms for external magnetic field-induced selective targeting of macrophages in the infarcted tissue and magnetic resonance imaging (MRI) monitoring. MFRFs have uniform size, favorable colloidal stability, and high magnetic properties. Under the influence of external magnetic field, MFRFs perform qualitative and quantitative MRI of myocardial infarction.

CoxFe3–xO4 Nanocubes for Theranostic Applications: Effect of Cobalt Content and Particle Size

We report a facile synthesis of cube-shaped CoxFe3–xO4 nanocrystals (NCs), which could be finely tuned in terms of NC size (from 15 to 27 nm) and cobalt stoichiometry (from 0.1 to 0.7). These particles exhibited high specific absorption rate (SAR) values, relevant for magnetic hyperthermia, and high relaxivity values, significant for magnetic resonance imaging applications. The peculiarity of these NCs is that already at low frequencies (such as 105 kHz, a working frequency used on human patients), they display SAR values that are three-times as large as those of iron oxide nanocubes of comparable sizes (and which were already considered outstanding). The highest SAR value recorded on the NCs reported here (915 ± 10 W/g(Co+Fe) at 105 kHz and 32 kAm–1) refers to particles with cubic shape, 20 ± 2 nm edge size, and Co stoichiometry between 0.6 and 0.7. The highest r2 value (958 mM–1 s–1) was instead recorded on nanocubes with Co stoichiometry around 0.5/0.6 and size of 20 ± 2 nm. Remarkably, only at this sp...

Duality of Iron Oxide Nanoparticles in Cancer Therapy: Amplification of Heating Efficiency by Magnetic Hyperthermia and Photothermal Bimodal Treatment.

The pursuit of innovative, multifunctional, more efficient, and safer treatments is a major challenge in preclinical nanoparticle-mediated thermotherapeutic research. Here, we report that iron oxide nanoparticles have the dual capacity to act as both magnetic and photothermal agents. We further explore every key aspect of this magnetophotothermal approach, choosing iron oxide nanocubes for their high efficiency for the magnetic hyperthermia modality itself. In aqueous suspension, the nanocubes' exposure to both: an alternating magnetic field and near-infrared laser irradiation (808 nm), defined as the DUAL-mode, amplifies the heating effect 2- to 5-fold by comparison with magnetic stimulation alone, yielding unprecedented heating powers (specific loss powers) up to 5000 W/g. In cancer cells, the laser excitation restores the optimal efficiency of magnetic hyperthermia, otherwise inhibited by intracellular confinement, resulting in a remarkable heating efficiency in the DUAL-mode (up to 15-fold amplification), with respect to the magnetophotothermal mode. As a consequence, the dual action yielded complete apoptosis-mediated cell death. In solid tumors in vivo, single-mode treatments (magnetic or laser hyperthermia) reduced tumor growth, while DUAL-mode treatment resulted in complete tumor regression, mediated by heat-induced tumoral cell apoptosis and massive denaturation of the collagen fibers, and a long-lasting thermal efficiency over repeated treatments.

Interfacial strain and defects in asymmetric Fe–Mn oxide hybrid nanoparticles

Asymmetric Fe-Mn oxide hybrid nanoparticles have been obtained by a seed-mediated thermal decomposition-based synthesis route. The use of benzyl ether as the solvent was found to promote the orientational growth of Mn1-xO onto the iron oxide nanocube seeds yielding mainly dimers and trimers whereas 1-octadecene yields large nanoparticles. HRTEM imaging and HAADF-STEM tomography performed on dimers show that the growth of Mn1-xO occurs preferentially along the edges of iron oxide nanocubes where both oxides share a common crystallographic orientation. Fourier filtering and geometric phase analysis of dimers reveal a lattice mismatch of 5% and a large interfacial strain together with a significant concentration of defects. The saturation magnetization is lower and the coercivity is higher for the Fe-Mn oxide hybrid nanoparticles compared to the iron oxide nanocube seeds.

Controlling Orientational and Translational Order of Iron Oxide Nanocubes by Assembly in Nanofluidic Containers.

We demonstrate that spatial confinement can be used to control the orientational and translational order of cubic nanoparticles. For this purpose we have combined X-ray scattering and scanning electron microscopy to study the ordering of iron oxide nanocubes that have self-assembled from toluene-based dispersions in nanofluidic channels. An analysis of scattering vector components with directions parallel and perpendicular to the slit walls shows that the confining walls induce a preferential parallel alignment of the nanocube (100) faces. Moreover, slit wall separations that are commensurate with an integer multiple of the edge length of the oleic acid-capped nanocubes result in a more pronounced translational order of the self-assembled arrays compared to incommensurate confinement. These results show that the confined assembly of anisotropic nanocrystals is a promising route to nanoscale devices with tunable anisotropic properties.

Functionalization of strongly interacting magnetic nanocubes with (thermo)responsive coating and their application in hyperthermia and heat-triggered drug delivery.

Herein, we prepare nanohybrids by incorporating iron oxide nanocubes (cubic-IONPs) within a thermoresponsive polymer shell that can act as drug carriers for doxorubicin(doxo). The cubic-shaped nanoparticles employed are at the interface between superparamagnetic and ferromagnetic behavior and have an exceptionally high specific absorption rate (SAR), but their functionalization is extremely challenging compared to bare superparamagnetic iron oxide nanoparticles as they strongly interact with each other. By conducting the polymer grafting reaction using reversible addition-fragmentation chain transfer (RAFT) polymerization in a viscous solvent medium, we have here developed a facile approach to decorate the nanocubes with stimuli-responsive polymers. When the thermoresponsive shell is composed of poly(N-isopropylacrylamide-co-polyethylene glycolmethyl ether acrylate), nanohybrids have a phase transition temperature, the lower critical solution temperature (LCST), above 37 °C in physiological conditions. Doxo loaded nanohybrids exhibited a negligible drug release below 37 °C but showed a consistent release of their cargo on demand by exploiting the capability of the nanocubes to generate heat under an alternating magnetic field (AMF). Moreover, the drug free nanocarrier does not exhibit cytotoxicity even when administered at high concentration of nanocubes (1g/L of iron) and internalized at high extent (260 pg of iron per cell). We have also implemented the synthesis protocol to decorate the surface of nanocubes with poly(vinylpyridine) polymer and thus prepare pH-responsive shell coated nanocubes.

TPA Immobilization on Iron Oxide Nanocubes and Localized Magnetic Hyperthermia Accelerate Blood Clot Lysis

The low specificity and high risk of intracranial hemorrhage associated with currently approved thrombolytic therapies limit their efficacy in recanalizing occluded vessels. Here, a nanoscale thrombolytic agent is demonstrated by immobilizing tissue plasminogen activator molecules (tPA) over 20 nm clustered iron oxide nanocubes (NCs). The resulting nanoconstructs (tPA–NCs) are capable of dissolving clots via both direct interaction of tPA with the fibrin network (chemical lysis) and localized hyperthermia upon stimulation of superparamagnetic NCs with alternating magnetic fields (AMFs) (mechanical lysis). In vitro, as compared to free tPA, the proposed nanoconstructs demonstrate a ≈100‐fold increase in dissolution rate, possibly because of a more intimate interaction of tPA with the fibrin network. The clot dissolution rate is further enhanced (≈10‐fold) by mild, localized heating resulting from the exposure of tPA–NCs to AMF. Intravital microscopy experiments demonstrate blood vessel reperfusion within a few minutes post tail vein injection of tPA–NCs. The proposed nanoconstructs also exhibit high transverse relaxivity (&gt;400 × 10–3 m−1 s−1) for magnetic resonance imaging. The multifunctional properties and the 3 orders of magnitude enhancement in clot dissolution make tPA–NCs a promising nano‐theranosis agent in thrombotic disease.

Mesoscale assemblies of iron oxide nanocubes as heat mediators and image contrast agents.

Iron oxide nanocubes (IONCs) represent one of the most promising iron-based nanoparticles for both magnetic resonance image (MRI) and magnetically mediated hyperthermia (MMH). Here, we have set a protocol to control the aggregation of magnetically interacting IONCs within a polymeric matrix in a so-called magnetic nanobead (MNB) having mesoscale size (200 nm). By the comparison with individual coated nanocubes, we elucidate the effect of the aggregation on the specific adsorption rates (SAR) and on the T1 and T2 relaxation times. We found that while SAR values decrease as IONCs are aggregated into MNBs but still keeping significant SAR values (200 W/g at 300 kHz), relaxation times show very interesting properties with outstanding values of r2/r1 ratio for the MNBs with respect to single IONCs.

Europium-engineered iron oxide nanocubes with high T1 and T2 contrast abilities for MRI in living subjects.

Magnetic resonance imaging (MRI) contrast agents with both positive (T1) and negative (T2) contrast abilities are needed in clinical diagnosis for fault-free accurate detection of lesions. We report a facile synthesis of europium-engineered iron oxide (EuIO) nanocubes as T1 and T2 contrast agents for MRI in living subjects. The Eu(iii) oxide-embedded iron oxide nanoparticles significantly increase the T1 relaxivity with an enhanced positive contrast effect. EuIO nanocubes with 14 nm in diameter showed a high r1 value of 36.8 mM(-1) s(-1) with respect to total metal ions (Fe + Eu), which is about 3 times higher than that of Fe3O4 nanoparticles with similar size. Moreover, both r1 and r2 values of EuIO nanocubes can be tuned by varying their sizes and Eu doping ratios. After citrate coating, EuIO nanocubes can provide enhanced T1 and T2 contrast effects in small animals, particularly in the cardiac and liver regions. This work may provide an insightful strategy to design MRI contrast agents with both positive and negative contrast abilities for biomedical applications.

Magnetic field-induced self-assembly of iron oxide nanocubes.

Self-assembly of inorganic nanoparticles has been studied extensively for particles having different sizes and compositions. However, relatively little attention has been devoted to how the shape and surface chemistry of magnetic nanoparticles affects their self-assembly properties. Here, we undertook a combined experiment-theory study aimed at better understanding of the self-assembly of cubic magnetite (Fe3O4) particles. We demonstrated that, depending on the experimental parameters, such as the direction of the magnetic field and nanoparticle density, a variety of superstructures can be obtained, including one-dimensional filaments and helices, as well as C-shaped assemblies described here for the first time. Furthermore, we functionalized the surfaces of the magnetic nanocubes with light-sensitive ligands. Using these modified nanoparticles, we were able to achieve orthogonal control of self-assembly using a magnetic field and light.

A novel approach for the synthesis of ultrathin silica-coated iron oxide nanocubes decorated with silver nanodots (Fe3O4/SiO2/Ag) and their superior catalytic reduction of 4-nitroaniline.

A novel sonochemical approach was developed for the synthesis of different core/shell structures of Fe3O4/SiO2/Ag nanocubes and SiO2/Ag nanospheres. The total reaction time of the three sonochemical steps for the synthesis of Fe3O4/SiO2/Ag nanocubes is shorter than that of the previously reported methods. A proposed reaction mechanism for the sonochemical functionalization of the silica and the silver on the surface of magnetic nanocubes was discussed in detail. Transmission electron microscopy revealed that the surface of Fe3O4/SiO2 nanocubes was decorated with small Ag nanoparticles of approximately 10-20 nm in size, and the energy dispersive spectroscopy mapping analysis confirmed the morphology of the structure. Additionally, X-ray diffraction data were used to confirm the formation of both phases of a cubic inverse spinel structure for Fe3O4 and bcc structures for Ag in the core/shell structure of the Fe3O4/SiO2/Ag nanocubes. The as-synthesized Fe3O4/SiO2/Ag nanocubes showed a high efficiency in the catalytic reduction reaction of 4-nitroaniline to 4-phenylenediamine and a better performance than both Ag and SiO2/Ag nanoparticles. The grafted silver catalyst was recycled and reused at least fifteen times without a significant loss of catalytic efficiency.

Precise control over shape and size of iron oxide nanocrystals suitable for assembly into ordered particle arrays

Here we demonstrate how monodisperse iron oxide nanocubes and nanospheres with average sizes between 5 and 27 nm can be synthesized by thermal decomposition. The relative importance of the purity of the reactants, the ratio of oleic acid and sodium oleate, the maximum temperature, and the rate of temperature increase, on robust and reproducible size and shape-selective iron oxide nanoparticle synthesis are identified and discussed. The synthesis conditions that generate highly monodisperse iron oxide nanocubes suitable for producing large ordered arrays, or mesocrystals are described in detail.