Iron Content Research Articles

Early Detection of Myocardial Involvement in Thalassemia Intermedia Patients: Multiparametric Mapping by Magnetic Resonance Imaging.

No study has assessed myocardial T1 and T2 values in patients with beta-thalassemia intermedia (β-TI). To assess the prevalence of myocardial involvement in β-TI patients by T2* relaxometry and native T1 and T2 mapping and to determine the correlation of myocardial relaxation times with demographic and clinical parameters. Prospective matched-cohort study. 42 β-TI patients (27 females, 39.65 ± 12.32 years), enrolled in the Extension-Myocardial Iron Overload in Thalassaemia Network, and 42 age- and sex-matched healthy volunteers (27 females, 40.01 ± 11.36 years) and thalassemia major (TM) patients (27 females, 39.27 ± 11.57 years). 1.5 T/multi-echo gradient echo, modified Look-Locker inversion recovery, multi-echo fast-spin-echo, cine balanced steady-state-free precession, and late gadolinium enhancement (LGE) sequences. Hepatic, pancreatic, and left ventricular (LV) T2* values, LV native T1 and T2 values, biventricular ejection fractions and volumes, and presence and extent of replacement myocardial fibrosis. Comparisons between two groups were performed with two-sample t tests, Wilcoxon's signed rank tests, or χ2 testing. Correlation analysis was performed using Pearson's or Spearman's test. P < 0.05 was considered statistically significant. β-TI patients had significantly higher LV T2 values than healthy subjects (56.84 ± 4.03 vs. 52.46 ± 2.50 msec, P < 0.0001) and significantly higher LV T1 values than TM patients (1018.32 ± 48.94 vs. 966.66 ± 66.47 msec, P < 0.0001). In β-TI, female gender was associated with significantly increased LV T1 (P = 0.041) and T2 values (P < 0.0001), while splenectomy and presence of regular transfusions were associated with significantly lower LV T1 values (P = 0.014 and P = 0.001, respectively). In β-TI patients, all LV relaxation times were significantly correlated with each other (T2*-T1: P = 0.003; T2*-T2: P = 0.003; T1-T2: P < 0.0001). Two patients with a reduced LV T2* also had a reduced LV T1, while only one had a reduced LV T2. Three patients had a reduced LV T1 but a normal LV T2*; 66.7% of the patients had an increased LV T2. All LV relaxation times were significantly correlated with pancreas T2* values (T2*: P = 0.033; T1: P < 0.0001; T2: P = 0.014). No LV relaxation time was associated (P > 0.05) with hepatic iron concentration, biventricular function parameters, or LGE presence. The combined use of all three myocardial relaxation times has potential to improve sensitivity in the detection of early/subclinical myocardial involvement in β-Tl patients. 2 TECHNICAL EFFICACY: Stage 2.

The relationship between iron metabolism markers and parameters of carbohydrate and lipid metabolism in patients with overweight and obesity

Background: Hyperferritinemia associated with obesity and insulin resistance is a link between the components of the metabolic syndrome and a possible triggering factor in the pathogenesis of carbohydrate metabolism disorders and dyslipidemia.Aim: To establish possible relationships between ferrokinetic parameters, parameters of lipid and carbohydrate metabolism in overweight and obese patients, and to analyze the possibility of using iron metabolism parameters (ferritin and serum iron) as predictors of carbohydrate metabolism disorders in this cohort of patients.Material and Methods. The study included 52 overweight or obese patients. In the course of the study, patients were stratified into groups depending on the presence of carbohydrate metabolism disorders (CMD), and depending on the state of iron metabolism. Among all patients included in the study, an assessment of anthropometric data, a study of glycated hemoglobin, a standard glucose tolerance test with 75 g of glucose, a study of hematological parameters, as well as biochemical parameters of iron metabolism – the concentration of serum iron, transferrin and ferritin, was carried out.Results. Patients with CMD – impaired glucose tolerance or impaired fasting glycaemia – had significantly higher serum ferritin levels than obese patients without CMD (p = 0.019). In persons with a high level of ferritin, CMD developed significantly more often than in patients with a ferritin content in the range below the 75th percentile (χ2 = 5.278, p = 0.022). According to the ROC analysis, ferritin showed a rather high sensitivity – 75%, and specificity – 84.4% at a diagnostic threshold of 126.65 ng/ml (area under the curve = 0.738; p = 0.016) in the diagnosis of prediabetes (IGT/IFG) in overweight and obese individuals.Conclusion. High concentrations of iron and ferritin are positively associated with CMD, with ferritin being a promising predictor of prediabetes and type 2 diabetes mellitus.

Proteomics fingerprinting reveals importance of iron and oxidative stress in Streptomyces scabies-Solanum tuberosum interactions.

The Gram-positive actinobacterium Streptomyces scabies is the major causal agent of potato common scab. The main pathogenicity factor is thaxtomin A, a phytotoxin that causes atypical cell death, although other secondary metabolites have been described to play a role in S. scabies virulence. Despite this, many aspects of the interaction between S. scabies and its primary host Solanum tuberosum L. remain to be elucidated. Intracellular proteins of S. scabies EF-35 grown in the presence of in vitro produced tubers (microtubers) of the Russet Burbank and Yukon Gold potato cultivars were extracted and analysed by electrospray mass spectrometry (ES MS/MS). Based on the results of proteomic analysis, iron quantification by ICP-MS and nitrite quantification using Griess reagent in growth media as well as RT-qPCR analysis of the siderophore pyochelin gene expression were performed in the presence and absence of microtubers. Hydrogen peroxide accumulation was also determined in the nutrient medium used for co-cultivation of bacteria and potato microtubers. Potato microtubers caused an increase in the content of bacterial proteins involved in stress and defense, secondary metabolism, and cell differentiation, as well as secreted proteins. Co-cultivation with potato microtubers induced the accumulation of S. scabies proteins implicated in siderophore pyochelin biosynthesis, nitrite production and oxidative stress perception and response. The increase in the abundance of proteins related to pyochelin biosynthesis was consistent with a significant decrease in the iron content in the culture medium, as well as with induction of expression of pyochelin biosynthesis genes. Elevated nitrite/sulfite reductase protein levels were associated with increased nitrite excretion by S. scabies cells in the presence of host microtubers. The increase in the levels of proteins associated with signaling and oxidative stress response could have been caused by the accumulation of ROS, in particular hydrogen peroxide, detected in the studied system. These findings show that interactions of S. scabies with living potato microtubers induce the production of secondary metabolites, defense responses, and protection from oxidative stress. This study suggests the importance of iron during host - S. scabies interactions, resulting in competition between pathogen and its host.

Potential benefits of advanced chelate-based trace minerals in improving bone mineralization, antioxidant status, immunity, and gene expression modulation in heat-stressed broilers.

Organic sources of trace minerals (TM) in broiler diets are more bioavailable and stable than inorganic sources, making them particularly beneficial during challenging periods such as heat stress (HS) conditions. A 42-d study investigated the effects of using advanced chelate technology-based TM (ACTM) or adding varying amounts of ACTM to broiler diets during HS conditions. The study involved 672 male broiler chickens in 7 treatment groups, including a thermoneutral control (TNC) group and six HS treatments. There were 8 replicate pens per treatment and 12 birds per replicate. The six HS treatments included birds exposed to a cyclic HS environment (34°C) for 8 h and were as follows: HSC, which consisted of the same basal diet with the recommended ITM levels; ACTM50 and ACTM100, which replaced the basal diet with 50% and 100% ACTM instead of ITM; ITM+ACTM12.5 and ITM+ACTM25, which involved adding extra ACTM to the ITM basal diet at 12.5% and 25%, respectively; and ITM125, which used 125% of the recommended levels of ITM in the basal diet. Compared with the HSC treatment, the TNC, ACTM100, and ITM+ACTM25 treatments resulted in increased (P < 0.05) body weight; tibia weight; tibia ash, phosphorus, iron, and manganese contents; secondary antibody titers; and serum TAC and SOD values but decreased (P < 0.05) serum MDA concentrations and the expression levels of the hepatic genes IL-1β, IL-6, and INF-γ. The TNC and ACTM100 groups also showed greater (P < 0.05) feed efficiency, tibia length, tibia zinc content, and hepatic SOD1 expression but exhibited reduced (P < 0.05) hepatic NF-kB expression. Significant increases (P < 0.05) in primary anti-NDV titers, serum GPx1 activity, and Nrf2 and GPx1 gene expression levels were also detected in the ACTM100, ITM+ACTM12.5, and ITM+ACTM25 groups. In conclusion, the findings suggest that replacing ITM with ACTM or adding ACTM to ITM diets, especially at a 25% higher dose, can effectively protect broilers from heat stress by promoting growth, reducing inflammation, and increasing the expression of antioxidant proteins.

Removal of iron and aluminum from hydrometallurgical NMC-LFP recycling process through precipitation

There is a need to develop removal strategies for typical battery impurities–iron and aluminum–from actual hydrometallurgical recycling solutions. In this work, the investigated solution originated from lithium nickel manganese cobalt oxide (NMC) rich black mass, while iron phosphate (LFP) was used as an in situ reductant. It was found that the presence of phosphate ions supported selective iron precipitation already at pH = 2.0 (T = 60 °C, t = 3 h, NaOH), with nearly complete iron removal (97.8 %). The precipitate was rich in iron (21.5 wt%) and phosphorus (13.4 wt%); it also contained 0.7 wt% Ni and 0.3–0.4 wt% Mn, Co, Al, and Li. It is suggested that the presence of phosphate in minor amounts may cause this co-precipitation of battery metals. With the aim of combined precipitation of iron (100 %) and aluminum (91.0 %), the pH was increased up to 4.5. Although 90.8 % of fluoride precipitated, the remaining fluorides may have kept the aluminum partially in soluble form as Al-F complexes. The formed precipitate had lower iron (18.4 wt%) and phosphorus (11.4 wt%) content, whereas the impurity contents and thus the battery metals losses were slightly higher: Ni, Mn, Co, Al, and Cu were each between 1.1–1.9 wt% and Li and F < 1 wt%. In the precipitates investigated, iron was found predominantly as iron phosphate (FePO4), whereas a minor fraction also precipitated as iron fluoride (FeF3). The precipitated aluminum existed mainly as AlOOH. The results presented here will help to build iron and aluminum removal strategies for industrial battery recycling solutions, and also provide insights into the dominant iron and aluminum phases forming the precipitates.

Utility of iron concentration two to four hours post ingestion in predicting toxicity

IntroductionIron products are widely available over the counter and have the potential to cause serious toxicity. Iron concentrations can be used to prognosticate and guide treatment during acute ingestions. Traditionally, a concentration of 350 μg/dL with symptoms, or 500 μg/dL without symptoms, is considered toxic and will likely need treatment to prevent decompensation. It is generally recommended that an iron concentration is obtained at least 4 h after exposure to provide adequate absorption time and avoid falsely low iron concentrations. Despite this, many iron overdoses have concentrations drawn immediately upon patient presentation. The utility of an iron concentration drawn before 4 h in assessing exposure risk is not clear. The purpose of this study is to determine if patients' symptoms and iron concentrations obtained between 2 and 4 h can predict the development of iron concentrations after 4 h. MethodsThis is a single-center, retrospective study of patient cases with a primary ingestion of oral iron reported to a Regional Poison Center from January 1, 2015 to January 1, 2020. The primary outcome is the incidence of an iron concentration of 350 μg/dL or greater at or beyond 4 h. Secondary outcomes include the incidence of antidotal deferoxamine administration, incidence of iron concentration > 500 μg/dL, incidence of positive findings on abdominal radiography, and time to highest reported iron concentration. ResultA total of 75 patients were included in this study. No patients who developed at most minor symptoms (abdominal discomfort, nausea, vomiting, or diarrhea without evidence of systemic toxicity) and had a 2-to-4-h concentration ≤ 300 μg/dL symptoms had a subsequent concentration > 350 μg/dL (negative predictive value [NPV] 100 %). Deferoxamine was used to treat five patients, all reached concentrations of >300 μg/dL 2–4-h post-ingestion. ConclusionPatients with only minor GI symptoms and an iron concentration of ≤300 μg/dL between 2 and 4-h post ingestion are unlikely to develop further toxicity. In this case series, a concentration of 300 μg/dL or less between 2 and 4 h was the ideal cutoff to predicting subsequent potentially toxic concentrations, with a sensitivity of 100 % and a specificity of 54 %.

Improving Iron Content in Sustainable Mycoprotein Production through Seawater Fermentation

The growing global population and rising protein demand are straining freshwater resources. Fusarium venenatum (Fv) mycoprotein offers a sustainable protein alternative, with environmental efficiency and potential health benefits. However, its low iron content remains a concern, especially for vegetarians and vegans. This study introduces a sustainable approach, employing seawater as a fermentation medium for Fv production. Our analysis reveals that mycoprotein derived from SEA Fv exhibits elevated levels of sodium and calcium, with a notably high iron content (2.2 mg/100g wet weight). The sodium content, while 3.31 times higher than in non-seawater fermentation, remains within recommended daily intake parameters. No plasticizers or heavy metals were detected in the SEA Fv cell body, minimizing long-term toxicity risks from seawater use. A unique metabolite, dihydroorotic acid, was identified from an in-house library of 774 metabolites, serving as an internal biomarker for seawater-based production methods. An acute safety study condensing 600g of SEA Fv to simulate high mycoprotein digestion showed no effects on key physical behaviors or major organs, including the heart and lungs. This positions the product as a viable protein alternative with enhanced iron content, highlighting seawater-based fermentation as a sustainable method for future food production and industry progress.

Optimization of iron, phosphate, and salinity in nutrient medium using response surface methodology for enhancing biochemical composition in Chlorella sp. culture

Microalga Chlorella sp. is a highly scientifically and commercially attractive unicellular microorganism and has developed a stable industry as a nutritional supplement for people and animals. Various nutrient media have been used to grow Chlorella sp. cultures to enhance their growth, pigmentation, and lipid content. However, the optimal biochemical composition and density of Chlorella sp. cultures require an understanding of optimizing the nutrient medium to study their production. The present study aims to investigate the effects of iron, phosphate, and salinity concentrations by working synergically in a nutrient medium on the growth responses, pigments, and lipid accumulation of Chlorella sp. culture using a response surface methodology (RSM) approach. Using the result from the RSM software, a total of 18 experimental groups (E1 – E18) were evaluated, and one confirmation (C) study was conducted. The results revealed that the E7 experiment in Chlorella sp. culture provided the highest cell density and specific growth rate (SGR) with 176.00 × 106 cells mL−1 and 0.35 day−1, respectively. Similarly, the E5 and E1 experiments produced the highest cell density of 166.10 × 106 cells. mL−1 and 152.13 × 106 cells mL−1, respectively. The SGR was also increased at 0.33 day−1 in the E5 experiment and 0.33 day−1 in the E1 experiment. Consequently, the culture of Chlorella sp. containing high iron and phosphate concentrations and lower salinity in a nutrient medium had the highest number of cells, SGR, and pigment accumulation (chlorophyll a and total carotenoid). In addition, the presence of high salinity concentrations reduces Chlorella sp. growth. However, the increase in the growth of Chlorella sp. culture did not indicate an increase in other biochemical compositions. In some cases, biochemical compositions are high due to nutritional limitations or stress factors. For example, in pigment accumulation, chlorophyll a pigment accumulation was increased in experiment E7 (51.57 μg mL−1), while total carotenoid accumulation was increased in experiment E8 (20.68 μg mL−1). In addition, increasing salinity concentration increased chlorophyll a and total carotenoid contents per cell, but decreased Chlorella sp. growth as shown in the E4 experiment, which achieved chlorophyll a levels of 1.38 pg cell−1 and total carotenoid levels of 0.52 pg cell−1. Furthermore, Chlorella sp. culture produces a higher lipid accumulation of 37.38 % in the E3 experiment. Hence, the results of this study contribute to understanding the optimal biochemical composition and cell growth of Chlorella sp. cultures.

Hippocampal iron overload and spatial reference memory impairment: Insights from a rat model

BackgroundBrain iron overload may induce neuronal death and lead to cognitive impairment. The hippocampus is a critical limbic structure involved in memory. This study aimed to investigate iron overload and its role in hippocampal damage and memory impairment using a rat model. MethodsYoung rats (2 weeks old) received intraperitoneal injections of high-dose iron solution (Group H, n = 10), low-dose iron solution (Group L, n = 10) and normal saline as control (Group D, n = 5). The Morris water maze (MWM) test was performed on all rats to evaluate their spatial reference memory by assessing their escape latency time and number of platform crossing. The iron content and neuronal damage in hippocampal tissue sections of the rats were assessed semi-quantitatively using diaminobenzidine (DAB)-enhanced Perl’s Prussian blue (PPB) staining, and their correlation with spatial reference memory performance was evaluated. ResultsThe escape latency in Group H was significantly longer compared to Groups L and D (P < 0.05). The number of platform crossings was significantly lower in Group H than in Group L or D (P < 0.001). The neuronal cells in Group H had more brown iron deposits than those of Groups L and D. There were significant correlations between the severity of structural damage in the hippocampal tissue and the number of platform crossings (P1 = 0.001 for Group H; P2 = 0.043 for Group L). ConclusionThis study showed an association between hippocampal iron-induced structural damage and spatial reference memory impairment in a rat model. This work should advance our understanding of hippocampal iron overload on cognitive functioning.

Toxic Metals and Metalloids in Food: Current Status, Health Risks, and Mitigation Strategies.

Exposure to toxic metals/metalloids, such as arsenic (As), cadmium (Cd), and lead (Pb), through food consumption is a global public health concern. This review examines the contamination status of these metals/metalloids in food, assesses dietary intake across different populations, and proposes strategies to reduce metal/metalloid exposures throughout the food chain. For the general population, dietary intake of metals/metalloids is generally lower than health-based guidance values. However, for vulnerable populations, such as infants, children, and pregnant women, their dietary intake levels are close to or even higher than the guidance values. Among different food categories, seafood shows higher total As, but largely present as organic species. Rice accumulates higher As concentration than other cereals, with inorganic As (iAs) and dimethylarsinic acid (DMA) being the main As species. Methylated thioarsenate species, such as dimethylmonothioarsenate, have also been detected in rice. The distribution of iAs and DMA in rice shows geographical variation. Additionally, seafood and cocoa products generally contain more Cd than other food, but seafood consumption does not significantly increase in adverse health effects due to its high zinc and iron content. Compared to As and Cd, Pb concentrations in food are generally lower. To minimize the health risks of metal/metalloid exposure, several strategies are proposed. Food contamination with toxic metals/metalloids poses significant concerns for human health, particularly for vulnerable populations. This review provides scientific evidence and suggestions for policy makers to reduce human exposure of metals/metalloids via dietary intake.

Ultrathin natural biotite crystals as a dielectric layer for van der Waals heterostructure applications

Biotite, an iron-rich mineral belonging to the trioctahedral mica group, is a naturally abundant layered material (LM) exhibiting attractive electronic properties for application in nanodevices. Biotite stands out as a non-degradable LM under ambient conditions, featuring high-quality basal cleavage-a significant advantage for van der Waals heterostructure (vdWH) applications. In this work, we present the micro-mechanical exfoliation of biotite down to monolayers (1Ls), yielding ultrathin flakes with large areas and atomically flat surfaces. To identify and characterize the mineral, we conducted a multi-elemental analysis of biotite using energy-dispersive spectroscopy mapping. Additionally, synchrotron x-ray fluorescence and infrared nano-spectroscopy were employed to probe its iron content and vibrational signature in few-layer form, respectively, with sensitivity to the layer number. We have also observed good morphological and structural stability in time (up to 12 months) and no important changes in their physical properties after thermal annealing processes in ultrathin biotite flakes. Conductive atomic force microscopy evaluated its electrical capacity, revealing an electrical breakdown strength of approximately 1 V nm-1. Finally, we explore the use of biotite as a substrate and encapsulating LM in vdWH applications. We have performed optical and magneto-optical measurements at low temperatures. We find that ultrathin biotite flakes work as a good substrate for 1L-MoSe2, comparable to hexagonal boron nitride flakes, but it induces a small change of the 1L-MoSe2g-factor values, most likely due to natural impurities on its crystal structure. Furthermore, our results show that biotite flakes are useful systems to protect sensitive LMs such as black phosphorus from degradation for up to 60 days in ambient air. Our study introduces biotite as a promising, cost-effective LM for the advancement of future ultrathin nanotechnologies.

Assessment of transfusion-induced iron overload with T2*MRI in survivors of childhood acute lymphoblastic leukemia: A case control study

IntroductionChildhood acute lymphoblastic leukemia survivors receiving multiple packed red blood transfusions may be at risk of vital organ iron deposition causing long-term complications. This study was undertaken to assess the prevalence and severity of iron overload in the liver and heart by magnetic resonance imaging. MethodsA case-control study was conducted on 60 acute lymphoblastic leukemia survivors aged from 6 to 18 years and 60 healthy, age- and sex-matched children as a control group. The hematological profile, and serum ferritin was assessed and the iron content of the liver and heart was measured by T2* magnetic resonance imaging. ResultsTwenty-six (43.3 %) and two (3.3 %) patients had elevated liver and myocardial iron concentrations, respectively. The statistics show a significantly positive correlation between liver T2* magnetic resonance and serum ferritin. The total volume of blood transfused and duration of follow up were associated with elevated liver iron concentrations (p-values = 0.036 and 0.028 respectively). Myocardial T2* magnetic resonance lacked correlation with serum ferritin and transfusion therapy ConclusionLiver iron overload was detected in children and adolescents after acute lymphoblastic leukemia therapy. The risk of iron overload was related mainly to the transfusion burden during therapy. These patients need monitoring after therapy to assess their need for future chelation therapy.

Assessment on the Effect of Rapid Urbanization on Groundwater Quality of Mirpur Area, Dhaka City, Bangladesh

Dhaka’s population is increasing day by day as more people are migrating towards Dhaka city for improving their level of living and for availing the cities amenities. Hence, this is creating pressure on the overall water quality of Dhaka city. The work intended to assess the groundwater standard in Mirpur area of Dhaka City, Bangladesh by analyzing eight (08) different physicochemical water quality parameters. In December 2023, six (06) separate water samples were taken throughout the dry season from six (06) sites across the area. The results showed that all sites had pH levels between 7.18 to 7.50, which is within acceptable ranges for drinking water quality and indicates neutral to slightly alkaline conditions. Total dissolved solids (TDS) continued to be far below safety limits (210–250 ppm), indicating that the water's mineral content was quite low. Electrical conductivity (EC) measurements fell within acceptable ranges (290-350 μS/cm), indicating suitable groundwater quality. Dissolved oxygen (DO) levels varied (3.7-9.3 mg/L), with some sites exhibiting satisfactory oxygenation while others raised concerns about potential water quality issues. Total hardness (TH) levels (330-900 mg/L) exceeded recommended limits (200-500 mg/L) at all sites, suggesting potential issues with water quality. However, chemical oxygen demand (COD) levels were minimal or zero (0-3 mg/L), indicating minimal organic pollution. Iron concentrations were generally low (0-0.05 mg/L). Total chlorine (TC) concentrations varied (0- 0.03 mg/L) across sites. In summary, the study emphasizes how crucial it is to continuously monitor and regulate the quality of groundwater in order to guarantee the sustainability and safety of water resources in the Mirpur region.

Caffeic acid inhibits Staphylococcus aureus-induced endometritis through regulating AMPKα/mTOR/HIF-1α signalling pathway.

Endometritis is mostly caused by childbirth or postpartum uterine infection. It is one of the important reasons leading to female infertility. Caffeic acid (CA) and its derivatives are widely found in some foods and traditional Chinese medicine, and have biological activities such as antioxidant, free radical scavenging, anti-inflammatory, and anti-infection. In this study, we aimed to explore the effect of CA on Staphylococcus aureus-induced endometritis. The contents of TNF-α and IL-1β were detected by ELISA in S. aureus-induced endometritis model. Western blot assay was used to detect the expression of AMPKα/mTOR/HIF-1α pathway related proteins and GPX4 expression. In addition, the concentrations of MDA, GSH, and iron were tested by the assay kits. Compared with the model group, CA treatment significantly alleviated S. aureus-induced uterine injury, MPO activity, the contents of inflammatory factors TNF-α and IL-1β, and NF-κB activation. Meanwhile, CA significantly inhibited S. aureus-induced ferroptosis, as confirmed by decreased MDA and iron concentration and up-regulated GPX4 expression and GSH level. Furthermore, CA attenuated S. aureus-induced HIF-1α and phosphorylated mTOR expression and increased phosphorylated AMPK expression. In conclusion, CA inhibits inflammation and ferroptosis by regulating AMPKα/mTOR/HIF-1α signalling pathway to alleviate S. aureus-induced endometritis in mice.

Effect of dietary protein on serum hepcidin and iron concentrations in adults with obesity

Effect of dietary protein on serum hepcidin and iron concentrations in adults with obesity

Impact of formulation and home storage conditions on the content of furan and derivatives in powdered infant formula

While autoxidation of Polyunsaturated Fatty Acids (PUFAs) is a potential source of furan and its derivatives, the regulatory obligation to enrich powdered infant formulae (PIF) with some of these compounds might raise safety issues. The aim of this study was to investigate the impact of formulation and home storage conditions on the generation of furan and its derivatives in PIF. Furan, 2-methylfuran (2-MF) and 3-methylfuran (3-MF) were monitored by a validated SHS-GC-Q Exactive-Orbitrap MS method in six PIF formulated with high or low concentrations of different PUFAs (ALA, ARA, DHA), pro-oxidants (iron) and anti-oxidants (vitamins) and stored for 21 days under more or less oxidizing home storage conditions, including temperature (19 °C or 40 °C) and oxygen exposure (protected or not from ambient air). For the three compounds, the quality of the measurements in PIF was first confirmed with suitable linearity, limits of quantification, precision and recoveries. In a second step, the impact of the formulation was evaluated on six PIF commercial samples differing significantly in their composition in ALA, ARA, DHA, iron and/or vitamin E and C. While furan was quantifiable (2.8 µg/kg) in only one PIF with high content of DHA and iron and low level of vitamins, 2-MF was only quantifiable in two other PIF which were distinguished by a 15 to 20 % higher ALA content and 3-MF was not detected in any of the six PIF studied.. In a third step, the effect of storage conditions was studied on the six PIFs and the increase in storage temperature to 40 °C led to an increase of up to 33 % in the 2-MF concentration in the two PIF formulations where it was quantifiable. Nevertheless, the estimation of the Margin of Exposure (MOE) showed that the risk related to furan and its derivatives could be ruled out regardless of the formulation or storage conditions. Finally, in order to explore other derivatives and to investigate the mechanisms involved in the generation of furan compounds in PIF, a suspect screening approach was implemented on the SHS-GC-Q Exactive Orbitrap MS data. It made it possible on the one hand to point out two additional furan derivatives in PIF, 2-ethylfuran and 2-pentylfuran. On the other hand, it enabled to discuss the oxidation pathways involved in the generation of furan compounds in PIF from profiling of known PUFA oxidation markers also detected in the samples.

Influence of phosphorous fertilizer on mineral nutrition and yield attributes of wheat: Acquisition with PSTOL1 gene for arid environment

To boost agricultural yields, understanding mineral nutrition’s reliance on fertilizers is crucial, underscoring the need to evaluate nutrient-use efficiency for optimal fertilization. In this regard, a field study was conducted to elaborate the role of phosphorus fertilizer in enhancing growth, yield and marginal rate of return in four wheat varieties; two Zn-biofortified (Zincol-2016 and Akbar-2019) and two standard types (Anaj-2017 and FSD-2008). The study revealed that application of phosphorus significantly enhanced the uptake of nitrogen (N), phosphorous (P) and potassium (K) contents in straw (13 %, 59 % and 79 %) and grains (63 %, 92 % and 28 %) respectively. Similarly, the contents of Zinc (Zn) and iron (Fe) were reduced in straw (23 % and 19 %) and grains (19 % and 18 %) respectively after application of 80 and 120 kg P2O5, however at 40 kg P2O5 the contents of Zn and Fe were slightly enhanced. The grain yield (21 %) and harvest index (11 %) was maximum at 80 kg P2O5 as compared to 40 and 120 kg P2O5. The Marginal rate of return over investment (MRR) in P2O5 was maximum (241 %) in Akbar-2019 when P-fertilizer was applied at the rate of 80 kg P2O5 per ha−1. Regression analysis showed a positive correlation between grain yield and its determinants. Biofortified wheat varieties responded better to 80 kg P2O5, outperforming standard varieties in yield. Additionally, our findings demonstrate a significant upregulation of PSTOL1 gene expression at 80 kg P2O5 level. Concludingly the application of P-fertilizer at the rate of 80 kg P2O5 per ha−1 enhanced growth, yield and rate of return of testing wheat varieties especially the biofortified ones; Zincol-2016 and Akbar-2019.

Responses of 'Flordaguard' and 'MP-29' Prunus spp. rootstocks to hypoxia and high root zone temperature.

Selecting the right rootstock is crucial for successful fruit production and managing both biotic and abiotic stresses in commercial fruit orchards. To enhance the resilience of peach orchards, this study evaluated the physiological and biochemical responses of Prunus spp. rootstocks , 'Flordaguard' and 'MP-29,' under normoxia (sufficient oxygen content) or short-term hypoxia (low-oxygen content) and ambient or high temperature (40°C) in the root zone. Physiological responses measured were net photosynthesis, stomatal conductance, transpiration, intercellular CO2 concentration, water use efficiency, the leaf chlorophyll index, and the maximum potential quantum efficiency of photosystem II. The leaf concentrations of nitrogen, phosphorus, potassium, magnesium, calcium, sulfur, boron, zinc, manganese, iron, and copper were also analyzed. Reactive oxygen species (ROS) and antioxidants analyzed were superoxide dismutase (SOD) activity, peroxidase (POD) activity, catalase (CAT) activity, ascorbate peroxidase (APX) activity, glutathione peroxidase (GPX) activity, proline content, glycine betaine content (GB), lipid peroxidation (LPO), superoxide (O2 -) concentration, and hydrogen peroxide (H2O2) concentration. When subjected to root zone hypoxia or high temperature individually, 'MP-29' performed better physiologically than 'Flordaguard'. However, when root zone hypoxia and high temperature were combined, 'MP-29' performed better biochemically with enhanced antioxidant activity, osmolyte content, and nutrient absorption. Nutrient analysis of leaves revealed that 'MP-29' had higher N, P, K, Ca, and B concentrations than 'Flordaguard'. Consequently, 'MP-29' demonstrated greater tolerance to short-term exposure to the combined effects of high root zone temperature and hypoxia. This research contributes to identifying a suitable rootstock within the Prunus genus able to withstand root zone conditions that often result from severe weather events commonly experienced in Florida and other parts of the world.

Optimization of Tantalite Ore Dissolution Using Hydrofluoric-sulphuric Acid and Shrinking Core Model

Aim: This study investigates the dissolution of tantalite mineral from granitic pegmatite in Okpella, Northern Edo State, Nigeria. Study Design: Elemental and mineral composition analysis of tantalite ore sample from Okpella was carried out using X-ray fluorescence and X-ray diffraction. Response Surface Methodology (RSM) and the shrinking core model were used in designing the study while the effects of temperature, stirring speed, particle diameter, and mixed acids concentrations were investigated in the dissolution rates of the mineral. Duration of Study: 50 experimental runs were designed using RSM Central Composite Design (CCD) to optimize variables including HF concentration (1-8 M), H2SO4 concentration (0.5-3 M), temperature (32-82°C), stirring speed (0-500 rpm), and particle size (0.1-0.3 mm), with a constant contact time of 240 minutes. Methodology: Pulverized tantalite samples (0.1-0.3 mm) were reacted with varying concentrations of hydrofluoric and sulphuric acids (1-8 M and 0.5-3.0 M, respectively) for 240 minutes, with stirring speeds between 0-500 rpm and temperatures from 32 to 82°C. The mixture was stirred in a water bath with 50 ml of mixed acids solution and 2 g of ore. After the reaction, the solution was decanted, and the residual ore was washed, dried at 60 °C, and weighed. The difference between the initial and final weights indicated the amount of undissolved tantalite ore. Results: Ore characterization results revealed high concentration of tantalum (34.17%), iron (12.55%), niobium (8.38%), and titanium (6.01%), with other elements present in smaller amounts. Optimal conditions were found to be 8 M HF, 0.5 M H2SO4, 82°C, 500 rpm stirring speed, and 0.1 mm particle size, resulting in 97.28% dissolution of tantalite ore. Regression analysis demonstrated model robustness with an F-value of 16.70 and a P-value of 0.0001, indicating HF concentration and stirring speed as the most impactful factors. The model’s R² value of 0.9201 and adjusted R² of 0.8650 confirm its predictive accuracy. Analysis using the shrinking sphere model showed that film diffusion control is the primary limiting step with t/τ=0.999, while reaction control resulted in slightly lower conversion with t/τ=0.973, highlighting film diffusion as the main constraint but with high conversion efficiency. Conclusion: The findings from this investigation not only reveal the dissolution of tantalite ore through a detailed experimental approach, identifying optimal conditions -8 M HF, 0.5 M H2SO4, 82 oC, 500 rpm stirring speed and 0.1 mm particle size- that achieve a 97.28% dissolution, but they also enhance our understanding of mineral processing. These understanding are crucial for mineral dissolution up scaling technologies in industrial applications, which will potentially leads to a more efficient extraction method that could significantly reduce costs and environmental impacts in the mining sector. This research could drive advancements in sustainable resource recovery and contribute to sourcing of critical minerals.

تقدير المعادن الثقيلة في بعض أنواع مختلفة الكعك المجمعة من أسواق مدينة البيضاء – ليبيا

Heavy metals are chemical elements with high density and atomic weight. Despite their widespread use in various industries and applications, they pose significant risks to the environment and public health if not handled properly. This study was conducted to estimate the concentration of some different elements in different types of cakes, where cake samples were collected from different shops from Al-Bayda city, the study dealt with six types of cakes. Flame photometer was used to estimate sodium and potassium salts and spectrophotometer to estimate heavy elements. The samples were digested using the digestion method using HNO1 and HCl and heating until the brown oxides evaporate and we get half the amount. The results showed that the concentration of sodium, chromium, iron and copper is below the permissible limits and the concentration of potassium is higher than the permissible limits and the results also showed that the collected cake samples do not contain lead and a discrepancy was observed .The potassium concentration ranged from (541. 50 to 763.25), sodium concentration ranges from (1.34 to 3.52), iron concentration ranges from (1.72 to 7.16), copper concentration ranges from (44.36 to 67.62), and chromium concentration ranges from (0 to 0.25). The study could be expanded to include other types of cakes, such as filled cakes to provide a more comprehensive picture of heavy metal contamination in these products. More heavy metals, such as mercury, arsenic, and cadmium, could be analyzed to more accurately assess health risks. Keywords: Heavy metals, Cakes types, market and Al-Bayda – Libya.