Ionic Liquid Research Articles

An ionic liquid-based adjuvant for modulating cellular and humoral immune responses

Vaccination is an important strategy for the prevention of infectious diseases worldwide. Adjuvants can be incorporated in vaccine formulations to enhance the resultant immune response and subsequently confer more robust protection upon natural infection. While adjuvants have exciting potential to improve vaccination, the landscape of materials employed in clinical adjuvants is small and its expansion is needed to facilitate vaccine development against current and future infectious diseases. This study introduces the first ionic liquid (IL) adjuvant comprised of choline and sorbic acid (ChoSorb) to produce an antigen-specific cellular as well as humoral immune response against multiple antigens. The abilities of ChoSorb as a vaccine adjuvant is evaluated and characterized through material analysis, innate immune responses, and adaptive responses to both a model and clinical grade antigen. With the robust immune responses generated by ChoSorb and the accompanying mechanistic insights, this study introduces ILs as a new class of adjuvant materials for future vaccine design.

A Polymer Film with Very High Seebeck Coefficient and Overall Thermoelectric Properties by Secondary Doping, Dedoping Engineering and Ionic Energy Filtering

AbstractThermoelectric (TE) materials are significant for sustainable development because they can be used to harvest waste heat into electricity. Organic TE materials have unique merits including high mechanical flexibility, low cost, and low intrinsic thermal conductivity. But their TE properties particularly the Seebeck coefficient are notably lower than the inorganic counterparts. Here, a poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) film is reported with a very high Seebeck coefficient and figure of merit (zT) at room temperature through secondary doping, dedoping engineering, and ionic energy filtering. The PEDOT:PSS films are successively treated with acid, base, and vitamin C that is a reductant, and then coated with 1‐ethyl‐3‐methylimidazolium dicyanamide (EMIM:DCA) that is an ionic liquid. This can exhibit a record‐high Seebeck coefficient and power factor of 111 µV K−1 and 1285 µW m−1 K−2, respectively, and the corresponding zT value is 1.05. This is the highest zT value for polymers and polymer composites, and it is comparable to that of the best inorganic TE materials.

Ion induced ultra-tough single-network ionogel.

Ionogels with high fracture strength (16.90 MPa), high Young's modulus (119.97 MPa), high tensile toughness (96.86 MJ m-3), high fracture energy (119.07 kJ m-2) and excellent stretchability (∼1300%) were prepared by varying the ions of solvents. This strategy can be applied to other monomers and ionic liquids, offering a promising way to prepare an ultra-tough ionogel.

Synthesis of 6- or 8-Carboxamido Derivatives of Imidazo[1,2-a]pyridines via a Heterogeneous Catalytic Aminocarbonylation Reaction.

Imidazo[1,2-a]pyridines and especially their amide derivatives exhibit a wide range of favourable pharmacological properties. In this work, Pd-catalysed carbonylation was used for the first time for the introduction of the carboxamide moiety into positions 6 or 8. A recyclable Pd catalyst, with palladium immobilised on a supported ionic liquid phase decorated with pyridinium ions, was used efficiently for the conversion of 6- or 8-iodo derivatives to the products. In the case of 6-iodo derivatives, a competing mono- and double carbonylation could be observed in the reactions of aliphatic amines as nucleophiles, but under the proper choice of reaction conditions, good-to-excellent selectivities could be achieved towards either the corresponding amides or α-ketomides. The heterogeneous catalyst showed excellent recyclability and low Pd-leaching.

Anion regulation for surface passivation enables ultrahigh-stability perovskite nanocrystals.

All-inorganic perovskite CsPbBr3 nanocrystals (NCs) display high photoluminescence quantum yield and narrow emission, which show great potential application in optoelectronic devices. However, the poor environment stability of NCs will hinder their practical application. Herein, a series of ionic liquids with different anions (BF4-, Br-, and NO3-) were used as a sole capping ligand to synthesize NCs. Among the three samples, 1-hexadecyl-3-methylimidazolium tetrafluoroborate ([C16MIM]BF4) capped NCs have the highest stability in light, thermal, and water, possibly attributing to the in situ passivation of bromine vacancy via pseudohalogen BF4- and tight binding of ionic liquid ligands and lead atoms. In addition, green-emission [C16MIM]BF4 NCs were used to assemble a white light-emitting diode device, and it possessed a wide National Television System Committee color gamut of 124.5% and a stable emission peak at high driving currents of 380 mA. This work paves the way for resurfacing perovskite NCs with ultrahigh stability, thereby driving the perovskite NC display industry closer to real-world application.

Direct oxidative esterification of benzaldehydes and benzylalcohols using task-specific imidazolium based perchlorate ionic liquid

Direct oxidative esterification of benzaldehydes and benzylalcohols using task-specific imidazolium based perchlorate ionic liquid

Electrochemical and Chemical Reactivities of Titanium Oxide-Based Materials with a Chloroaluminate Ionic Liquid Electrolyte for Aluminum Batteries

Electrochemical and Chemical Reactivities of Titanium Oxide-Based Materials with a Chloroaluminate Ionic Liquid Electrolyte for Aluminum Batteries

Impact of emerging pollutants mixtures on marine and brackish phytoplankton: diatom Phaeodactylum tricornutum and cyanobacterium Microcystis aeruginosa

Pharmaceuticals and ionic liquids (ILs) are emerging as significant micropollutants with environmental presence and potential ecological impacts. The possible simultaneous occurrence of these two groups of pollutants in aquatic environments raises complex challenges due to their diverse chemical properties and potential for interactive effects. Given the documented widespread presence of pharmaceuticals and the emerging concerns about ILs, the study aims to evaluate the adverse effects of binary mixtures of imidazolium ionic liquid IM1-8C(CN)3 and two representatives of pharmaceuticals: antibiotic oxytetracycline (OXTC) and metabolite carbamazepine 10,11 epoxide (CBZ-E) on the brackish cyanobacterium Microcystis aeruginosa and the marine diatom Phaeodactylum tricornutum during chronic exposure experiments. A comprehensive approach was employed, incorporating various endpoints including oxidative stress, chlorophyll a fluorescence, detailed photoprotective and photosynthetic pigment profiles of target microorganisms to assess modes of action and identify the mixture effects of the selected substances.The observed alterations in pigment production affecting carotenoids synthesis in both selected species may be attributed to the differential impacts of these substances on the photosynthetic pathways and metabolic processes in the cyanobacterial and diatom cells. Changes in chlorophyll a fluorescence-specific parameters suggest impairment of the photosynthetic activity, particularly affecting the efficiency of photosystem II.The application of Concentration Addition (CA) and Independent Action (IA) mathematical models, complemented by the evaluation of Model Deviation Ratios (MDR), revealed predominantly antagonistic interactions within the studied mixtures. The findings of this study provide important insights into the effects of mixtures of organic micropollutants and their potential impact on environment including brackish and marine waters.

Examining the Influence of Silver(I) Ion Coordination Environment in Ionic Liquids on Olefin-Paraffin Separations using Inverse Gas Chromatography.

Silver(I) ions (Ag+) undergo selective π-complexation with olefins and have been employed as separation media for the isolation of olefins from structurally similar paraffins. Ionic liquids (ILs) possess minimal vapor pressures, exceptional thermal stabilities, low melting points, as well as provide a favorable environment for π-complexation between Ag+ ions and olefins. The development of molecular drivers capable of highly selective olefin/paraffin separation systems with Ag+-containing ILs necessitates a comprehensive understanding of all factors that affect olefin solubility and selectivity. This study examines how coordinating different ligand species to Ag+ ions produces separation media with varying interaction strengths to olefins. Four coordination compounds, (4,4'-dimethyl-2,2'-bipyridine)silver(I) bis[(trifluoromethyl)sulfonyl]imide ([Ag+(DMBP)][NTf2-]), bis(pyridine)silver(I) [NTf2-] ([Ag+(Py)2][NTf2-]), bis(2,6-lutidine)silver(I) [NTf2-] ([Ag+(Lut)2][NTf2-]), and (triphenylphosphine)silver(I) [NTf2-] ([Ag+(PPh3)][NTf2-]) were dissolved in the 1-decyl-3-methylimidazolium [NTf2-] ([DMIM+][NTf2-]) IL and employed as stationary phases for inverse gas chromatography. Ligand coordination to the Ag+ ion was observed to modulate interactions of unsaturated hydrocarbons. The [Ag+(Py)2][NTf2-] complex offered the greatest olefin retention among the coordination complexes reaching 54% of the 1-octene retention factor of the uncoordinated [Ag+][NTf2-]. Hydrogen (H2) exposure studies showed ligand-dependent rates of reduction from Ag+ ion to elemental silver (Ag0). The [Ag+(PPh3)][NTf2-] complex exhibited superior stability, compared to the neat [Ag+][NTf2-] salt, reducing the retention factor of 1-octene by 15.3% and 19.4%, respectively, after 200 h of H2 exposure at 70 °C. The results from this study show that coordination complexes with Ag+ ions are useful in highly selective and efficient petroleum processing systems.

Poly(ionic liquid) functionalization: A general strategy for strong, tough, ionic conductive, and multifunctional polysaccharide hydrogels toward sensors

Poly(ionic liquid) functionalization: A general strategy for strong, tough, ionic conductive, and multifunctional polysaccharide hydrogels toward sensors

Miniaturized Electrochemical Gas Sensor with a Functional Nanocomposite and Thin Ionic Liquid Interface for Highly Sensitive and Rapid Detection of Hydrogen.

Hydrogen has been widely used in industrial and commercial applications as a carbon-free, efficient energy source. Due to the high flammability and explosion risk of hydrogen-air mixtures, it is vital to develop sensors featuring fast-responding and high sensitivity for hydrogen leakage detection. This paper presents a miniaturized electrochemical gas sensor by elaborately establishing a nanocomposite and thin ionic liquid interface for highly sensitive and rapid electrochemical detection of hydrogen, in which a remarkable response time and recovery time of approximately 6 s was achieved at room temperature. A screen-printed carbon electrode was modified with a reduced graphene oxide-carbon nanotube (rGO-CNT) hybrid and platinum-palladium (Pt-Pd) bimetallic nanoparticles to realize high sensitivity. To achieve miniaturization and high stability of the sensor, a thin-film room-temperature ionic liquid (RTIL) was employed as the electrolyte with a significantly decreased response time. The fast-responding hydrogen sensor demonstrates excellent performance with high sensitivity, linearity, and repeatability at concentrations below the lower explosive limit of 4 vol %. The engineered high-performance interface and gas sensor provide a promising and effective strategy for gas sensor design and rapid hazardous gas monitoring.

COIL-9: 9th Congress on Ionic Liquids Virtual Special Issue.

COIL-9: 9th Congress on Ionic Liquids Virtual Special Issue.

Synergistic Effect of Ionic Liquid and Superwettability Enables Large-Scale Fabrication of Aligned Silver Nanowire-Based Transparent Electrodes

Synergistic Effect of Ionic Liquid and Superwettability Enables Large-Scale Fabrication of Aligned Silver Nanowire-Based Transparent Electrodes

New Materials for Thin-Film Solid-Phase Microextraction (TF-SPME) and Their Use for Isolation and Preconcentration of Selected Compounds from Aqueous, Biological and Food Matrices.

Determination of a broad spectrum of analytes, carried out with analytical instruments in samples with complex matrices, including environmental, biological, and food samples, involves the development of new and selective sorption phases used in microextraction techniques that allow their isolation from the matrix. SPME solid-phase microextraction is compatible with green analytical chemistry among the sample preparation techniques, as it reduces the use of toxic organic solvents to the minimum necessary. Over the past two decades, it has undergone impressive progress, resulting in the development of the thin-film solid-phase microextraction technique, TF-SPME (the thin-film solid-phase microextraction), which is characterized by a much larger surface area of the sorption phase compared to that of the SPME fiber. TF-SPME devices, in the form of a mostly rectangular metal or polymer substrate onto which a thin film of sorption phase is applied, are characterized, among others, by a higher sorption capacity. In comparison with microextraction carried out on SPME fiber, they enable faster microextraction of analytes. The active phase on which analyte sorption occurs can be applied to the substrate through techniques such as dip coating, spin coating, electrospinning, rod coating, and spray coating. The dynamic development of materials chemistry makes it possible to use increasingly advanced materials as selective sorption phases in the TF-SPME technique: polymers, conducting polymers, molecularly imprinted polymers, organometallic frameworks, carbon nanomaterials, aptamers, polymeric ionic liquids, and deep eutectic solvents. Therefore, TF-SPME has been successfully used to prepare analytical samples to determine a broad spectrum of analytes in sample matrices: environmental, biological, and food. The work will be a review of the above-mentioned issues.

Deciphering the Coarse-Grained Model of Ionic Liquid by Tunning the Interaction Level and Bead Types of Martini 3 Force Field

In recent years, ionic liquids (ILs) have served as potential solvents to dissolve organic, inorganic, and polymer materials. A copolymer (for example, Pluronic) can undergo self-organization by forming a micelle-like structure in pure IL medium, and its assembly depends upon the composition of IL. To evaluate the role of ILs, accurate coarse-grained (CG) modeling of IL is needed. Here, we modeled 1-ethyl-3-methylimidazolium dicyanamide ([EMIM][DCA]) ionic liquid (IL) using a CG framework. We optimized CG parameters for the [DCA]− anion by tuning the non-bonded parameters and selecting different kinds of beads. The molecular density (ρ) and radial distribution function (RDF) of our CG model reveal a good agreement with the all-atom (AA) simulation data. We further validated our model by choosing another imidazolium-based cation. Our modified CG model for the anion shows compatibility with the cation and the obtained density matches well with the experimental data. The strategies for developing the CG model will provide a guideline for accurate modeling of new types of ILs. Our CG model will be useful in studying the micellization of non-ionic Pluronic in the [EMIM][DCA] IL medium.

A Comprehensive Comparison Analysis between Ammonium-Based and Phosphonium-Based Bifunctional Ionic Liquids for Metal Extraction and Separation Processes.

A phosphonium-based bifunctional ionic liquid (IL) Cyp-IL was synthesized to recover molybdenum and vanadium from industrial waste resources, such as the spent hydrodesulfurization catalysts. In comparison with the reported versatile Aliquat 336-based ionic liquid, the developed ionic liquid Cyp-IL was investigated for its potential application recovery of vanadium and molybdenum from industrial wastes. To assess the efficiency of the comparative extraction process, a comprehensive comparison analysis was conducted between the ammonium-based bifunctional ionic liquid Aliquat 336 and the developed phosphonium-based bifunctional ionic liquid Cyp-IL. Vanadium and molybdenum in the ionic liquid-loaded phases were selectively precipitated using NH4Cl and BaCl2 solutions in a basic medium. Compared to Aliquat 336-based Ali-IL, Cyp-IL exhibited superior performance in the extraction and separation processes of molybdenum and vanadium such as a recovery rate of Mo 91% and V 82.5% vs Mo 85% and V 72% by the ammonium-based bifunctional ionic liquid Ali-IL. The recovered components, such as molybdenum and vanadium, were characterized by energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and scanning electron microscopy (SEM). This method capacitates the sustainable recovery of pure vanadium and molybdenum compounds while minimizing the environmental impact.

Ionic Liquid-Assisted Synthesis of Higher Loaded Ni/Fe Dual-Atom Catalysts in N, F, B Codoped Carbon Matrix for Accelerated Sulfur Reduction Reaction.

In response to mitigating the severe shuttle effect within lithium-sulfur batteries, single-atom catalysts have emerged as one of the most effective solutions. Here, N, F, B codoped porous hollow carbon nanocages (NFB-NiFe@NC) with high Ni and Fe doping are rationally designed and synthesized using ionic liquids (ILs) as dopants. The introduction of ILs inhibits the growth of zeolitic imidazolate framework-8 (ZIF8), resulting in NFB-ZIF8 precursors with smaller particle sizes, enabling higher loading dual-atom catalysts. Meanwhile, the abundant heteroatoms increase the reactive sites and alter the carbon matrix's nonpolar intrinsic properties, thus enhancing the chemisorption of polysulfides. The synergistic interaction of the heteroatoms with Ni and Fe dual-atoms ultimately promotes the catalytic conversion kinetics of polysulfides. As a result of these beneficial properties, the cells prepared using the NFB-NiFe@NC modified separator exhibit significantly improved performance, including a high initial capacity of 1448 mAh g-1 at 0.2 C. Even at a high S-loading of 7.6 mg cm-2, the ideal area capacity of 8.38 mAh cm-2 can still be maintained at 0.1 C. New insights are provided here for designing highly loaded dual-atom catalysts for application in lithium-sulfur batteries.

Side-Reactions of Polyvinylidene Fluoride and Polyvinylidene Chloride Binders with Aluminum Chloride-Based Ionic Liquid Electrolyte in Rechargeable Aluminum-Batteries

Abstract Rechargeable aluminum batteries (RABs) use a Lewis acidic aluminum chloride (AlCl3) and 1-Ethyl-3-methylimidazolium chloride (EMImCl) ionic liquid electrolyte. Electrode fabrication often relies on procedures from lithium-ion batteries (LIBs), including the use of Polyvinylidene fluoride (PVdF) as a binder. However, PVdF reacts with Al2Cl7- in the RAB electrolyte, making it unsuitable for new battery types. The literature lacks details on the products formed, changes in the ionic liquid electrolyte, and the implications for electrochemical performance. With potential European Chemical Agency restrictions on per- and polyfluoroalkyl substances (PFAS) by 2025, Polyvinylidene chloride (PVdC) is being explored as an alternative binder. In contact with AlCl3:EMImCl (1.50:1.00) electrolyte, both, PVdF and PVdC transform into amorphous carbon during dehydrofluorination and dehydrochlorination, respectively, as confirmed by Raman spectroscopy. Furthermore, via 19F-NMR, it is shown that the reaction time between the soaked polymers and the ionic liquid has a significant influence on the newly formed aluminum chlorofluoride complexes. Electrochemical tests of graphite-based electrodes indicate increasing specific capacity of PVdF compared to PVdC with a continuous number of cycles. Amorphous carbon can prevent the disintegration of graphite and enhance conductivity. Furthermore, newly formed AlF4- can run a co-intercalation and lead to increasing specific capacity.

Dual-Responsive PIL Films with Gold Nanoparticles: Tailoring Electrical Responses to pH and Thermal Stimuli.

In recent years, stimuli-responsive poly(ionic liquids) (PILs) have attracted great attention. The stimuli-dependent properties, particularly the electrical properties, of multiresponsive PILs incorporating functionalized nanoparticles, however, have been less investigated. In this work, we present the synthesis, characterization, and application of PIL films incorporating pH- and thermoresponsive hybrid materials composed of gold nanoparticles functionalized with poly(2-(dimethylamino)ethyl methacrylate) (Au@PDMAEMA). The Au@PDMAEMA nanoparticles exhibit distinct responsiveness to changes in environmental pH and temperature, thereby altering the electrical properties of the PIL films blended with responsive gold nanoparticles (PIL w/Au). This research not only fills a gap in the study of electrical properties of multiresponsive nanoparticle-incorporated PILs but also extends the potential applications of PILs in various fields, including smart sensors and electronic devices.

Ionic liquid/polybenzimidazole/SiO2 composite membranes for medium temperature operating

Fuel cells (FC) with proton exchange membranes (PEMs) are seen as an alternative energy source due to their efficiency, power density, low emissions, and reliable energy supply. Proton exchange membranes based on polybenzimidazole have shown potential for operating at high and medium temperatures to enhance FCs performance. New composite membranes made from m-PBI and diethylammonium mesylate [DEAH/MsO] ionic liquid were prepared trough a solution casting method. Silica nanopowder (SiO2) was used as an inorganic filler at varying concentrations (0.5–20 wt%). The ionic liquid content in the membranes ranged from 1 to 2.5 mol per mole of PBI monomer units. Our study is focused on the thermal properties, such as thermal stability and phase transition temperatures, morphology, conductivity, and electrochemical stability of the membranes. The influence of the inorganic filler on these properties was also discussed.