Ion-pair Interactions Research Articles

Ionic Conduction in Polymer-Based Solid Electrolytes.

Good safety, high interfacial compatibility, low cost, and facile processability make polymer-based solid electrolytes promising materials for next-generation batteries. Key issues related to polymer-based solid electrolytes, such as synthesis methods, ionic conductivity, and battery architecture, are investigated in past decades. However, mechanistic understanding of the ionic conduction is still lacking, which impedes the design and optimization of polymer-based solid electrolytes. In this review, the ionic conduction mechanisms and optimization strategies of polymer-based solid electrolytes, including solvent-free polymer electrolytes, composite polymer electrolytes, and quasi-solid/gel polymer electrolytes, are summarized and evaluated. Challenges and strategies for enhancing the ionic conductivity are elaborated, while the ion-pair dissociation, ion mobility, polymer relaxation, and interactions at polymer/filler interfaces are highlighted. This comprehensive review is especially pertinent for the targeted enhancement of the Li-ion conductivity of polymer-based solid electrolytes.

Electricity-driven asymmetric bromocyclization enabled by chiral phosphate anion phase-transfer catalysis

Electricity-driven asymmetric catalysis is an emerging powerful tool in organic synthesis. However, asymmetric induction so far has mainly relied on forming strong bonds with a chiral catalyst. Asymmetry induced by weak interactions with a chiral catalyst in an electrochemical medium remains challenging due to compatibility issues related to solvent polarity, electrolyte interference, etc. Enabled by a properly designed phase-transfer strategy, here we have achieved two efficient electricity-driven catalytic asymmetric bromocyclization processes induced by weak ion-pairing interaction. The combined use of a phase-transfer catalyst and a chiral phosphate catalyst, together with NaBr as the bromine source, constitutes the key advantages over the conventional chemical oxidation approach. Synergy over multiple events, including anodic oxidation, ion exchange, phase transfer, asymmetric bromination, and inhibition of Br2 decomposition by NaHCO3, proved critical to the success.

Understanding the Role of Intramolecular Ion-Pair Interactions in Conformational Stability Using an Ab Initio Thermodynamic Cycle

Intramolecular ion-pair interactions yield shape and functionality to many molecules. With proper orientation, these interactions overcome steric factors and are responsible for the compact structures of several peptides. In this study, we present a thermodynamic cycle based on isoelectronic and alchemical mutation to estimate the intramolecular ion-pair interaction energy. We determine these energies for 26 benchmark molecules with common ion-pair combinations and compare them with results obtained using intramolecular symmetry-adapted perturbation theory. For systems with long linkers, the ion-pair energies evaluated using both approaches deviate by less than 2.5% in the vacuum phase. The thermodynamic cycle based on density functional theory facilitates calculations of salt-bridge interactions in model tripeptides with continuum/microsolvation modeling and four large peptides: 1EJG (crambin), 1BDK (bradykinin), 1L2Y (a mini-protein with a tryptophan cage), and 1SCO (a toxin from the scorpion venom).

Enhanced adsorption-catalysis combination for the removal of sulphur from fuels using polyoxometalates supported on amphipathic hybrid mesoporous silica nanoparticles.

Polyoxometalate (POM) mesoporous silica-based materials with a low POM loading have been designed with hydrophilic and hydrophobic properties. These materials act as powerful heterogeneous catalysts in oxidative desulfurization (ODS), owing to their ability to adsorb both H2O2 and sulphur-containing compounds from the model oil simultaneously. The formation of charge transfer salts through ion pair interaction with a choline functionality, available on the hybrid silica support, affords robust and recyclable heterogeneous catalysts for the ODS process under mild conditions (45 min and 40 °C). Besides, the nature of the polyoxometalate anions is highly dependent on the characteristics of the silica surface. The masking of silanol groups present on the silica surface using silylating agents, with diverse reactivity and steric hindrance, influences the silica surface-heteropolyanion interactions, as well as heteropolyanion-heteropolyanion interactions. In addition, it modifies the hydrophobic properties of the surface, which is a determining factor in the adsorption properties of non-polar dibenzothiophene (DBT) by the catalysts. Adsorption, an anterior step to the oxidation reaction, has been demonstrated to be key to the superior activity of POM-SiMe3-Chol-MSN, where the silanol groups have been capped by trimethylsilyl groups. For the first time, and to better understand POM-surface and POM-POM anion interactions, an extensive characterization of the materials has been performed using 13C, 31P, and 95Mo MAS NMR spectroscopy and solid-state electrochemical techniques, among others.

Shedding light on the physical nature of ion pair interactions involving carba-closo-dodecaborate anions. Insights from computation.

closo-Carboranes are structures that have been studied for many decades due to their vast applicability in medicine, catalysis, and energy storage. In order to go deeper into the physics behind the interactions of oppositely charged ions, which have potential applications in electrical energy storage and conversion devices, the present work aims to shed light on the physical nature of the interactions involving (R-CB11H11-, R = H, F, CH3, CF3) and Mq+ = Li+, Na+, Mg2+, Zn2+ ions. The bonding situations are evaluated in light of both canonical Kohn-Sham energy decomposition, EDA-NOCV, and local energy decomposition, LED, analyses. Electron and hole transports are also evaluated through charge transfer integrals. The findings reveal that such complexes present not only more significant electrostatic, but also non-negligible orbital contributions. Both energy decomposition analyses EDA-NOCV and DLPNO-LED confirm that the strength of ionic pair interactions (R-CB11H11- ↔ Mq+) is much more dependent on the nature of the cation employed than on the substituent R used. The results also reveal that charge transfers are not significant in such interacting systems.

Molecular dynamic simulations identifying the mechanism of holoenzyme formation by O-GlcNAc transferase and active p38α.

O-N-Acetylglucosamine transferase (OGT) can catalyze the O-GlcNAc modification of thousands of proteins. The holoenzyme formation of OGT and adaptor protein is the precondition for further recognition and glycosylation of the target protein, while the corresponding mechanism is still open. Here, static and dynamic schemes based on statistics can successfully screen the feasible identifying, approaching, and binding mechanism of OGT and its typical adaptor protein p38α. The most favorable interface, energy contribution of hotspots, and conformational changes of fragments were discovered. The hydrogen bond interactions were verified as the main driving force for the whole process. The distinct characteristic of active and inactive p38α is explored and demonstrates that the phosphorylated tyrosine and threonine will form strong ion-pair interactions with Lys714, playing a key role in the dynamic identification stage. Multiple method combinations from different points of view may be helpful for exploring other systems of the protein-protein interactions.

Crystal structure analysis of pyrrolidone carboxyl peptidase from Thermus thermophilus

Pyrrolidone carboxyl peptidase (PCP) hydrolytically removes the L-pyroglutamic acid from the amino terminal region of pyroglutamyl proteins or peptides. So far, only a limited number of structures of PCP have been solved. Here we report the crystal structure of pyrrolidone carboxyl peptidase from Thermus thermophilus (TtPCP) which has been solved using the molecular replacement method and refined at 1.9 Å resolution. TtPCP follows the α/β/α architecture in which the central β-sheets are surrounded by α-helices on both sides. The inter subunit contact between two monomers consists of two short antiparallel β-strands and part of a long protrusion loop. By comparing the TtPCP with its structural homologs, we identified the putative catalytic triad residues as Glu76, Cys139 and His160. A unique disulfide link found in some homologs of TtPCP, formed between two monomers that provide thermal stability to the protein, is not observed in TtPCP. Hence, being a thermophilic protein, the putative thermal stability of TtPCP could be due to more intra and inter-molecular hydrogen bonds, hydrophobic and ion pair interactions when compared with its mesophilic counterpart. The structural details of TtPCP will be helpful to understand the basis of the intrinsic stability of thermophilic proteins. Also, it could be useful for protein engineering.

Supercrystal engineering of atomically precise gold nanoparticles promoted by surface dynamics.

The controllable packing of functional nanoparticles (NPs) into crystalline lattices is of interest in the development of NP-based materials. Here we demonstrate that the size, morphology and symmetry of such supercrystals can be tailored by adjusting the surface dynamics of their constituent NPs. In the presence of excess tetraethylammonium cations, atomically precise [Au25(SR)18]- NPs (where SR is a thiolate ligand) can be crystallized into micrometre-sized hexagonal rod-like supercrystals, rather than as face-centred-cubic superlattices otherwise. Experimental characterization supported by theoretical modelling shows that the rod-like crystals consist of polymeric chains in which Au25 NPs are held together by a linear SR-[Au(I)-SR]4 interparticle linker. This linker is formed by conjugation of two dynamically detached SR-[Au(I)-SR]2 protecting motifs from adjacent Au25 particles, and is stabilized by a combination of CH⋯π and ion-pairing interactions between tetraethylammonium cations and SR ligands. The symmetry, morphology and size of the resulting supercrystals can be systematically tuned by changing the concentration and type of the tetraalkylammonium cations.

Structure and bonding in cryolitic melts a combined study by density functional theory and ionic model calculations

Present study aims to analyze the nature of the bonding of ion pairs and formation of Al(III) fluorocomplexes by discussing the detailed ion pair interactions for various microclusters on AlF3/NaF solutions (cryolitic melts). Using a comparative study between the density functional theory and an interionic force-field model calculations developed in our group, the structure of neutral micro clusters in cryolitic melts are analyzed to reveal their bonding characteristics of the ion pairs. Quantum Theory of Atoms in Molecules (QTAIM) analyses were perfomed in order to understand the molecular or ionic interactions both in vacuo and in dielectric continuum. This study provides detailed information about the local structure in cryolitic melts in terms of the bonding interactions between the ions.

Π-Π Stacking Complex Induces Three-Component Coupling Reactions To Synthesize Functionalized Amines.

π-π stacking and ion-pairing interactions induced the generation of α-amino radicals under the irradiation of visible light without the requirement of an expensive photocatalyst. This strategy enabled the construction of functionalized amines via three-component coupling reactions with broad scope (we report >50 examples with an up to 90 % yield). This synthetic pathway also delivered complex functionalized amines with a very high yield. Quantum chemistry Density Functional Theory (DFT) calculations identified π-π stacked ionic complexes; time-dependent DFT was employed to simulate the absorption spectra, and nudged elastic band (NEB) methodology provided a possible interaction/reaction picture of the selected species.

Quantifying the coupled monovalent and divalent ions sorption in dense ion-exchange membranes

As a universal phenomenon in solution-membrane systems, the coupled competitive monovalent and divalent ions sorption significantly impacts the transport process in ion-exchange membranes. Often, the quantitative and qualitative relationships between them are unclear. Here, we present a lattice-based molecular model to capture the interplay effect of ion-pairing and electrostatic interaction on the competitive partitioning process. In particular, we utilize statistical mechanics to formulate how the monovalent and divalent counterions competitively pair with the fixed charge group in the membranes. To this end, the model can quantify (a) the counterions sorption and (b) the coion repulsion within the membranes, which, collectively, allow us to quantify the ion partitioning and the pairing site saturation. To showcase the capability of our model, we compare our results with published experiment data, where we achieve a relatively good agreement between them. We demonstrate that the competitive ion partitioning depends highly upon (i) the entropy change generated by the counterions pairing with the fixed charge group, (ii) the binding energy, and (iii) the osmotic pressure, and (iv) the electrostatic interaction. These different factors can explain the favorable sorption of divalent counterions in the cation-exchange membranes but monovalent counterions in the anion ones, as previously reported. Altogether, our theoretical approach provides an insight into the fundamental understanding of coupled competitive monovalent and divalent ions sorption within the dense ion-exchange membranes, further enhancing the knowledge of the competitive ion partitioning process.

NMR chiral recognition of lipoic acid by cinchonidine CSA: A stereocenter beyond the organic function.

Alpha-lipoic acid is a natural product that possesses distinct pharmacological properties. Lipoic acid is a short-chain fatty acid containing an asymmetric carbon at five bonds of distance to the organic function. Herein, we developed a nuclear magnetic resonance protocol to access the chiral recognition of lipoic acid in a simple and rapid procedure employing cinchonidine as a cheap chiral solvation agent in deuterated chloroform. To optimize this method, a statistical design of the experimental model was performed to produce a clear understanding of the optimal concentration, temperature, and molar ratio parameters. Based on the obtained spectra, the cinchonidine H8 -H9 scalar coupling indicated a conformational preference in the chiral discrimination procedure. Density functional theory calculations established a proximity between the asymmetric center of lipoic acid and the aromatic moiety of cinchonidine, clarifying possible conformations in this ion-pair interaction. The described protocol demonstrates how far is far enough to chiral discrimination using a chiral solvation agent, expanding the method to compounds that contain a remote stereocenter.

Cobalt porphyrin/molybdenum disulfide nanoensembles for light-assisted electrocatalytic water oxidation and selective hydrogen peroxide production

The development of photo/electroactive catalysts sustainably producing hydrogen from water splitting and selectively hydrogen peroxide is of paramount importance to alleviate climate change effects. Herein, an anionic cobalt porphyrin (CoP) derivative is electrostatically interfaced with a positively charged modified molybdenum disulfide (MoS2), forming CoP/MoS2, which is accordingly employed as nonprecious photo/electrocatalyst for water oxidation reaction (WOR) and selective H2O2 production. According to the results, CoP/MoS2 shows remarkable bifunctional photo/electrocatalytic performance for WOR and 2e− pathway O2 reduction reaction (ORR) in alkaline electrolyte. Upon visible light irradiation, electrochemical measurements on a fluorine-doped tin oxide (FTO) coated glass electrode reveal an onset potential of 0.595 mV (ORR) and 1.575 mV (WOR) vs. reversible hydrogen electrode, being improved by approximately 80 mV, in both cases, compared to the dark conditions. Notably, the use of the FTO set-up not only enabled us to evaluate the photo/electrocatalytic activity of the CoP/MoS2 nanoensemble but also mimics the practical conditions in photo/electrochemical devices. The outstanding bifunctional photo/electrocatalytic performance of CoP/MoS2 is attributed to (a) the use of CoP as versatile single-atom molecular catalyst and photosensitizer (b) the strong ion-pair interactions between cationic modified MoS2 and the anionic CoP derivative, which prevent aggregation, ensuring better accessibility of the reactants to cobalt active sites, and (c) the co-existence of 1T and 2H phase at modified MoS2, offering improved electrical conductivity and intrinsic electrocatalytic activity along with enhanced intraensemble electronic interactions upon illumination. This work is expected to inspire the design of advanced and low-cost materials for the sustainable production of renewable fuels.

Strategies That Utilize Ion Pairing Interactions to Exert Selectivity Control in the Functionalization of C-H Bonds.

Electrostatic attraction between two groups of opposite charge, typically known as ion-pairing, offers unique opportunities for the design of systems to enable selectivity control in chemical reactions. Catalysis using noncovalent interactions is an established and vibrant research area, but it is noticeable that hydrogen bonding interactions are still the main interaction of choice in system design. Opposite charges experience the powerful force of Coulombic attraction and have the ability to exert fundamental influence on the outcome of reactions that involve charged reagents, intermediates or catalysts. In this Perspective, we will examine how ion-pairing interactions have been used to control selectivity in C–H bond functionalization processes. This broad class of reactions provides an interesting and thought-provoking lens through which to examine the application of ion-pairing design strategies because it is one that encompasses great mechanistic diversity, poses significant selectivity challenges, and perhaps most importantly is of immense interest to synthetic chemists in both industry and academia. We survey reactions that proceed via radical and ionic mechanisms alongside those that involve transition metal catalysis and will deal with control of site-selectivity and enantioselectivity. We anticipate that as this emerging area develops, it will become an ever-more important design strategy for selectivity control.

Quaternary diammonium reagents hosted on polymer nanofibers for hexachloridoiridate(IV) specificity: Experimental and theoretical studies

This study is focused on the development of iridium(IV)-specific quaternary diammonium cations containing electron-donating and electron-withdrawing groups. Quaternary diammonium cations used were tetramethylbenzyl-1,10-diammonium decane chloride (QuatDMDAMeBnz), tetrabenzyl-1,10-diammonium decane chloride (QuatDMDABnz), tetratrifluoromethylbenzyl-1,10-diammonium chloride (QuatDMDACF3Bnz), and tetranitrobenzyl-1,10-diammonium chloride (QuatDMDANO2Bnz). Polyvinylbenzylchloride (PVBC) nanofibers were used as a support material, and the functionalised nanofibers were used for the separation of Ir(IV) from Rh(III). The efficiency of the quaternary diammonium cations was investigated in a column study under dynamic flow adsorption conditions. Column sorption of [IrCl6]2- and [RhCl5(H2O)]2- on nanofibers functionalized with diammonium cations showed [RhCl5(H2O)]2- was not adsorbed by the sorbent materials while [IrCl6]2- was loaded onto the column. The loading capacities of [IrCl6]2- on the quaternary diammonium sorbent materials increased in the order of F-QuatDMDAMeBnz (3.08 mg/g; 16.01 mmol/g) < F-QuatDMDABnz (3.39 mg/g; 17.63 mmol/g) < F-QuatDMDACF3Bnz (5.46 mg/g; 28.42 mmol/g) < F-QuatDMDANO2Bnz (7.10 mg/g; 36.96 mmol/g). The loading capacity for Ir(IV) with quaternary diammonium cationic nanofibers increased with an increase in the electron-withdrawing nature of the substituent on the quaternizing group. This trend was further explained by considering the anion binding energies and electrostatic charges of the diammonium cations as well as their ion-pairing interactions with [IrCl6]2- and [RhCl5(H2O)]2- using molecular modeling calculations. The formation of [(L)IrCl6] ion-pairs with the charge diffuse [IrCl6]2- anion was energetically favoured from QuatDMDAMeBnz to QuatDMDANO2Bnz. The positive electrostatic potential (ESP) values of 473.92 kcal/mol for QuatDMDAMeBnz, 495.85 kcal/mol for QuatDMDABnz, 991.12 kcal/mol for QuatDMDACF3Bnz and 1133.05 kcal/mol for QuatDMDANO2Bnz also followed this trend. This trend was also well correlated with binding energies of the respective cations with [IrCl6]2- which were 22.66 kcal/mol for QuatDMDAMeBnz, 27.43 kcal/mol for QuatDMDABnz, 49.19 kcal/mol for QuatDMDACF3Bnz and 51.04 kcal/mol for QuatDMDANO2Bnz.

Filtering the NMR Spectra of Mixtures by Coordination to Paramagnetic Cu2.

The paramagnetic spin relaxation (PSR) filter allows the selective NMR signal suppression of components in mixtures according to their complexation ability to a paramagnetic ion. It relies on the faster relaxation of nuclei in paramagnetic environments and thus is complementary to classical diffusion and relaxation filters. So far, the PSR filter has established Gd3+ as the sole PSR agent, restricting the paramagnetic filtering repertoire. Herein, we present Cu2+ as a robust PSR agent with characteristic filtering properties. While Gd3+ depends on unspecific ion-pair interactions with anionic components, Cu2+ stands out for filtering species via ordered coordination complexes. An evaluation of the paramagnetic effect of Cu2+ over more than 50 small molecules and polymers has unveiled different sensitivities to Cu2+ (especially high for pyridines, diamines, polyamines, and amino alcohols) and precise filtering conditions for mixtures (1H, COSY, and HMQC) that were challenged with a test bed of commercial drugs. The advantage of integrating Cu2+ and Gd3+ for the stepwise PSR filtering of complex mixtures is also shown.

The Effects of Charged Amino Acid Side-Chain Length on Diagonal Cross-Strand Interactions between Carboxylate- and Ammonium-Containing Residues in a β-Hairpin.

The β-sheet is one of the common protein secondary structures, and the aberrant aggregation of β-sheets is implicated in various neurodegenerative diseases. Cross-strand interactions are an important determinant of β-sheet stability. Accordingly, both diagonal and lateral cross-strand interactions have been studied. Surprisingly, diagonal cross-strand ion-pairing interactions have yet to be investigated. Herein, we present a systematic study on the effects of charged amino acid side-chain length on a diagonal ion-pairing interaction between carboxylate- and ammonium-containing residues in a β-hairpin. To this end, 2D-NMR was used to investigate the conformation of the peptides. The fraction folded population and the folding free energy were derived from the chemical shift data. The fraction folded population for these peptides with potential diagonal ion pairs was mostly lower compared to the corresponding peptide with a potential lateral ion pair. The diagonal ion-pairing interaction energy was derived using double mutant cycle analysis. The Asp2-Dab9 (Asp: one methylene; Dab: two methylenes) interaction was the most stabilizing (−0.79 ± 0.14 kcal/mol), most likely representing an optimal balance between the entropic penalty to enable the ion-pairing interaction and the number of side-chain conformations that can accommodate the interaction. These results should be useful for designing β-sheet containing molecular entities for various applications.

New Developments in Chiral Phosphoric Acid Catalysis for Amine Synthesis

Abstract:Asymmetric catalysis with chiral phosphoric acids (CPAs) has impacted a wide range of organic reactions, including those that generate chiral amines of interest in medicinal and natural products chemistry. Phosphodiester derivatives (RO)2PO2H offer linkages to various chiral alcohols and diols, permitting the CPA to transmit stereochemical information to reactants via ion-pairing and/or H-bonding interactions of the P=O and O–H bonds. This minireview presents selected recent developments in CPA-catalyzed asymmetric synthesis of amines, emphasizing innovations from the literature of 2017–2021, with a few earlier examples to provide additional context. The coverage includes additions to imines, asymmetric protonation, induction of axial asymmetry, asymmetric Ugi and Passerini multicomponent coupling reactions, hydroaminations, and Minisci-type additions to heteroaromatic systems.

Adsorptive removal of fluoride using ionic liquid-functionalized chitosan – Equilibrium and mechanism studies

In this study, novel biosorbents, based on chitosan and imidazolium ionic liquid, were prepared for the removal of fluoride from aqueous solutions. The adsorbents were characterized by FTIR, SEM-EDS and low-temperature nitrogen adsorption-desorption. To investigate the adsorption mechanism and behavior of chitosan adsorbents, batch experiments were conducted under different adsorbent dosages (2, 4, 10 g/L), pH (4, 7, 9) and initial concentration (0.5–25.0 mg/L). The influence of the method of synthesis of ionic liquid on the adsorption performance were also studied. Experimental data were evaluated by Freundlich, Langmuir and Sips models. The introduction of ionic liquid significantly improved the uptake of fluoride compared to pure chitosan. The adsorption was influenced by the experimental conditions, as well as the method of ionic liquid synthesis. The highest fluoride removal was observed at pH 4 and found to decrease with increasing pH. The removal efficiency and adsorption capacity values indicated that the dose of 4 g/L was the optimum adsorbent dosage. The equilibrium data fitted best with the Sips isotherm and the maximum adsorption capacity reached 8.068 mg/g for modified chitosan beads. The mechanism of fluoride adsorption onto ionic liquid-modified chitosan involves electrostatic attraction, ion exchange and ion pair interaction.

Quantification of Water–Ion Pair Interactions in Polyelectrolyte Multilayers Using a Quartz Crystal Microbalance Method

Water existing within thin polyelectrolyte multilayer (PEM) films has significant influence on their physical, chemical, and thermal properties, having implications for applications including energy storage, smart coatings, and biomedical systems. Ionic strength, salt type, and terminating layer are known to influence PEM swelling. However, knowledge of water’s microenvironment within a PEM, whether that water is affiliated with intrinsic or extrinsic ion pairs, remains lacking. Here, we examine the influence of both assembly and post-assembly conditions on the water–ion pair interactions of poly(styrene sulfonate)/poly(diallyldimethylammonium) (PSS/PDADMA) PEMs in NaCl and KBr. This is accomplished by developing a methodology in which quartz crystal microbalance with dissipation monitoring is applied to estimate the number of water molecules affiliated with an ion pair (i), as well as the hydration coefficient, πsaltH2O. PSS/PDADMA PEMs are assembled in varying ionic strengths of either NaCl and KBr and then exposed post-assembly to increasing ionic strengths of matching salt type. A linear relationship between the total amount of water per intrinsic ion pair and the post-assembly salt concentration was obtained at post-assembly salt concentrations >0.5 M, yielding estimates for both i and πsaltH2O. We observe higher values of i and πsaltH2O in KBr-assembled PEMs due to KBr being more effective in doping the assembly because of KBr’s more chaotropic nature as compared to NaCl. Lastly, when PSS is the terminating layer, i decreases in value due to PSS’s hydrophobic nature. Classical and ab initio molecular dynamics provide a microstructural view as to how NaCl and KBr interact with individual polyelectrolytes and the involved water shells. Put together, this study provides further insight into the understanding of existing water microenvironments in PEMs and the effects of both assembly and post-assembly conditions.