Iodine Method Research Articles

Transition-metal-free and solvent-tolerant decarboxylative iodination of aromatic carboxylic acids

Current decarboxylative halogenation methods typically require expensive or toxic transition metal catalysts and have limited solvent compatibility. Herein, we report a novel transition-metal-free and solvent-tolerant decarboxylative iodination method by using iodine monochloride in the presence of potassium phosphate, which are effective to readily available aryl and heteroaryl carboxylic acids, and can be executed in a variety of solvents, including water.

Assessment and comparison of phytochemical constituents and biological activities of endemic Odonterrhena floribunda (Brassicaceae) from Türkiye

ABSTRACT This study aimed to evaluate the phenolic profile, antioxidant, antibacterial, and antidiabetic properties of ethanolic and methanolic extracts of the different parts of the endemic Odontarrhena floribunda. The antioxidant activities of O. floribunda were determined with 1,1-diphenyl-1-picrylhydrazyl (DPPH) and the copper-reducing antioxidant capacity (CUPRAC) assays. The strongest antioxidant activity was recorded in methanolic root extract (IC50:1.68±0.25 μg/mL) for DPPH and ethanolic root (λ450:0.68±0.20) extract for CUPRAC. Antibacterial activities of the extracts were displayed by the Resazurin Microplate Method (REMA). All plant extracts analyzed demonstrated stronger effects on Acinetobacter baumannii (ATCC 02026) than those of the standard compound. The in vitro α-amylase and α-glucosidase inhibitory of the plant extract were assessed using the Iodine method. Except for the methanol leaf extract, all other extracts showed strong α-glucosidase inhibitory activity (0.88–2.13 mmolTE/g). These results show that this endemic O. floribunda is a potential natural antioxidant, antibacterial, and enzyme inhibitor source.

Efficient Synthesis and Iodine-Functionalization of Pyrazoles via KIO3/PhSeSePh System under Acidic Conditions.

This manuscript reports a novel method for the direct iodination of the C-4 pyrazole ring generated in situ by the reaction of 1,1,3,3-tetramethoxypropane and various hydrazines. In this approach, potassium iodate (KIO3) is used as the iodinating agent and (PhSe)2 is used as catalysts under acidic conditions. This protocol provides a convenient method for the efficient synthesis of 4-iodo-1-aryl-1H-pyrazoles, valuable intermediates for several different coupling reactions.

Rapid and simultaneous analysis of monoiodoacetic acid and inorganic iodine in drinking water by capillary electrophoresis-inductively coupled plasma mass spectrometry

Monoiodoacetic acid (MIAA) is a disinfection by-product formed during water disinfection through the oxidation of iodide, followed by a reaction with natural organic matter. It exhibits high toxicity and strong mutagenicity and is potentially carcinogenic to humans. Therefore, the simultaneous detection of MIAA and inorganic iodine can enable the safety assessment of drinking water and expand the study of the dynamic transformation process between the two forms. Currently, there is a lack of efficient and rapid universal screening methods for MIAA and inorganic iodine. In this work, a simple and efficient method was developed to combine capillary electrophoresis with inductively coupled plasma mass spectrometry using a spray-efficient nebulizer interface for the speciation analysis of I− , IO3− , and MIAA. The method is based on qualitative analysis of retention time and quantitative determination using peak area. The detection limits of the three iodine forms were 0.16 μg L−1, 0.40 μg L−1, and 1.22 μg L−1, respectively. By coupling two instruments, the method combines the advantages of rapidity and accuracy with high injection efficiency. It is also more environmentally friendly as it does not require complex pre-treatment and avoids the use of toxic organic compounds. The accuracy of this method has been validated through the incorporation of authentic samples, paving the way for its deployment in the risk assessment of substantial volumes of drinking water and the expansion of the novel approach for further investigation into the genesis and transformation of MIAA.

Assessing Amylose Content with Iodine and Con A Methods, In Vivo Digestion Profile, and Thermal Properties of Amylosucrase-Treated Waxy Corn Starch.

In this study, waxy corn starch was modified with 230 U or 460 U of amylosucrase (AS) from Neisseria polysaccharea (NP) to elongate the glucan. The amylose content of the AS-modified starches was determined using iodine and concanavalin A (Con A) methods, and their in vivo digestion, thermal, swelling, and pasting properties were evaluated. The amylose content of AS-treated starches was not significantly different (p > 0.05) when using the Con A method but was significantly higher than that of non-AS-treated samples when using the iodine method. In vivo, rats fed AS-treated starch had significantly lower blood glucose levels at 15 min than other rats; rats fed 460 U AS had lower blood glucose levels at 30 and 60 min than non-AS-treated rats. DSC analysis revealed that AS-treated starches exhibited higher initial, melting, and completion temperatures. Minimal volume expansion was observed by swelling factor analysis, while a Rapid Visco Analyzer assessment revealed that they had higher pasting onset temperatures, lower peak viscosities, and no trough viscosity compared to native starch. The elongated glucans in AS-treated starch reinforced their crystalline structure and increased slowly digestible and enzyme-resistant starch content. Overall, AS-treated starch showed unique thermal properties and a reduced blood glucose index upon administration. This distinctive characteristic of NPAS-treated starch makes it a good candidate food or non-food material for cosmetic products, medical materials, and adhesives.

Standard Radio-Iodine Labeling Protocols Impaired the Functional Integrity of Mesenchymal Stem/Stromal Cell Exosomes.

Mesenchymal stem/stromal cells (MSCs) are an extensively studied cell type in clinical trials due to their easy availability, substantial ex vivo proliferative capacity, and therapeutic efficacy in numerous pre-clinical animal models of disease. The prevailing understanding suggests that their therapeutic impact is mediated by the secretion of exosomes. Notably, MSC exosomes present several advantages over MSCs as therapeutic agents, due to their non-living nature and smaller size. However, despite their promising therapeutic potential, the clinical translation of MSC exosomes is hindered by an incomplete understanding of their biodistribution after administration. A primary obstacle to this lies in the lack of robust labels that are highly sensitive, capable of directly and easily tagging exosomes with minimal non-specific labeling artifacts, and sensitive traceability with minimal background noise. One potential candidate to address this issue is radioactive iodine. Protocols for iodinating exosomes and tracking radioactive iodine in live imaging are well-established, and their application in determining the biodistribution of exosomes has been reported. Nevertheless, the effects of iodination on the structural or functional activities of exosomes have never been thoroughly examined. In this study, we investigate these effects and report that these iodination methods abrogate CD73 enzymatic activity on MSC exosomes. Consequently, the biodistribution of iodinated exosomes may reflect the biodistribution of denatured exosomes rather than functionally intact ones.

Hypervalent Iodine(III)‐Catalysis Using Sulfoxide Oxidant for the Dehydrogenative Cycloisomerization‐Arylation Reaction of 2‐Propargyl 1,3‐Dicarbonyl Compounds

AbstractWe report herein an unprecedented hypervalent iodine(III)‐catalysis using the activated sulfoxide. Since the present catalytic systems promote the dehydrogenative cycloisomerization‐arylation reaction of 2‐propargyl 1,3‐dicarbonyl compounds with aromatics, this report also provides one of the few methods for iodine(III)‐catalyzed intermolecular carbon‐carbon bond formation of aromatics.

Thermoelectric Sensor with CuI Supported on Rough Glass.

Thermoelectric generators convert heat into a potential difference with arrays of p- and n-type materials, a process that allows thermal energy harvesting and temperature detection. Thermoelectric sensors have attracted interest in relation to the creation of temperature and combustible gas sensors due to their simple operation principle and self-powering ability. CuI is an efficient p-type thermoelectric material that can be readily produced from a Cu layer by an iodination method. However, the vapor iodination of Cu has the disadvantage of weak adhesion on a bare glass substrate due to stress caused by crystal growth, limiting microfabrication applications of this process. This work presents a rough soda-lime glass substrate with nanoscale cavities to support the growth of a CuI layer, showing good adhesion and enhanced thermoelectric sensitivity. A rough glass sample with nanocavities is developed by reactive ion etching of a photoresist-coated glass sample in which aggregates of carbon residuals and the accumulation of NaF catalyze variable etching rates to produce local isotropic etching and roughening. A thermoelectric sensor consists of 41 CuI/In-CoSb3 thermoelectric leg pairs with gold electrodes for electrical interconnection. A thermoelectric leg has a width of 25 μm, a length of 3 mm, and a thickness of 1 μm. The thermoelectric response results in an open-circuit voltage of 13.7 mV/K on rough glass and 0.9 mV/K on bare glass under ambient conditions. Rough glass provides good mechanical interlocking and introduces important variations of the crystallinity and composition in the supported thermoelectric layers, leading to enhanced thermopower.

The impact of thickness-related grain boundary migration on hole concentration and mobility of p-type transparent conducting CuI films.

CuI films present promising optoelectronic properties for transparent conductors. However, the high hole concentration in CuI films hinders the controllable modulation of hole mobility, limiting their application in low-dimensional thin-film transistors. In this study, CuI films were prepared through a Cu film iodination method at room temperature, and a systematic investigation was conducted on the modulation of hole concentration and mobility with varying film thickness. The films exhibited a zinc blende structure (γ-phase) with increasing grain size as the thickness increased. The transmittance and optical bandgap of the films decreased with increasing thickness. The correlation of vacancy concentration with changing film thickness was analyzed through photoluminescence spectroscopy, revealing the influence of grain boundary migration on vacancy formation. The reduction in film thickness diminishes the migration of CuI grain boundaries, consequently reducing the probability of Cu vacancy and I vacancy formation, resulting in diminished hole concentration and enhanced hole mobility and film conductivity. The film with a thickness of 20 nm demonstrated optimal performance, with a transmittance of 90%, hole concentration of 4.09 × 1017 cm-3, hole mobility of 506.50 cm2 V-1 s-1, and conductivity of 33.19 S cm-1. This work deepens the understanding of hole transport such as hole concentration and mobility modulation in CuI films, highlighting the importance of controlling grain boundary migration during the film growth process.

Enhancing thermoelectric properties of Bi2Te3 film via CuI doping: Sputtering and solid iodination methods verified by ab initio calculation

We have introduced an innovative method for preparing CuI-doped Bi2Te3 films for the first time, which was also validated through ab initio calculations. The chemical reaction between the Cu-Bi2Te3 film and iodine was conducted using the solid iodination method at room temperature. The results from X-ray diffraction and energy-dispersive spectrometry suggest that the sputtering process, followed by the solid iodination method, holds promise for synthesizing CuI-doped Bi2Te3 films. Additionally, appropriately doping Bi2Te3 with CuI enhances the (00l) crystal orientation, increases carrier concentration and mobility, resulting in improved electrical conductivity. Furthermore, our calculation results align with our experimental findings. An excess of substitutional CuI dopant tends to generate secondary phases, leading to alterations in the intrinsic conductivity and a reduction in the thermoelectric properties of Bi2Te3. Leveraging the enhanced electrical transport properties achieved through CuI doping, the maximum power factor of the (CuI)0.2Bi2Te2.9 film reaches approximately 2.40 × 10−3 W/mK2 at 423 K, representing a 66 % enhancement compared to that of the Bi2Te2.9 film, which has a power factor of 1.44 × 10−3 W/mK2.

The Impact of Radiation Dose Variation in Panoramic Dental Examination on Salivary Amylase Enzyme Activity

The surge in oral and dental diseases has amplified the significance of dental panoramic imaging as a diagnostic tool for healthcare professionals. However, such imaging subjects patients to radiation, impacting salivary pH and amylase enzyme activity. This study of 30 patients aimed to measure radiation doses and their effects on salivary pH and amylase enzyme activity. Radiation doses were quantified using a Thermoluminescent Dosimeter (TLD-100) and analyzed with a TLD reader. Salivary pH was determined using a digital pH meter, and amylase enzyme activity was assessed through the iodine method, involving a reaction between a 1% amylum solution, iodine solution, and saliva. Results showed an average radiation dose of 2.33 μSv, significantly affecting salivary pH. Specifically, 28 patients experienced an average pH decrease of 0.34, while 2 had an average pH increase of 0.385. These pH changes corresponded with variations in amylase enzyme activity. In 17 patients, amylase activity increased by an average of 0.75×10-4 units/mL, while 13 patients exhibited an average decrease of 0.96×10-4 units/mL. This underscores the intricate relationship between radiation dose, salivary pH, and amylase enzyme activity, warranting further exploration within dental panoramic imaging.

KARAKTERISASI DAN STUDI SINERGI ANALOG KURKUMIN DARI SENYAWA 4-METOKSIBENZALDEHIDA SEBAGAI ANTIDIABETES DENGAN METODE IODIN (CHARACTERIZATION AND SYNERGY STUDY OF CURCUMIN ANALOGS FROM 4-METHOXYBENZALDEHYDE COMPOUND AS AN ANTIDIABETIC USING IODINE METHOD)

Curcumin is the main component of turmeric with various biological activities, one of which is antidiabetic. However, curcumin has low bioavailability and fast metabolism, so repeated doses are required if used as a medicine. Curcumin analogs have better bioavailability than curcumin. This study aims to synthesize curcumin analog from 4-methoxybenzaldehyde and monoketone (cyclohexanone and cyclopentanone), and their synergism effect using iodine method. The compounds A and B have been synthesized using Claisen-Schmidt condensation from benzaldehyde derivatives using KOH 8% and ethanol as solvent. The results showed that the curcumin analogs A and B were yellow solids with yields of 31,13% and 31,87%, respectively. The structure of products was characterized by FTIR, DI-MS, 1H- and 13C-NMR, showed that curcumin analogs A is 2,6-bis(4-methoxybenzylidene)cyclohexanone and curcumin analogs B is 2,6-bis(4-methoxybenzylidene)cyclopentanone. α-amylase inhibition assay of curcumin analogs A and B were performed by formation of amylum-iodine complex with UV-vis spectrophotometer at wavelength of 600 nm, showed that 33,03% and 91,5% at concentration 1 mM. Synergy studies with ferulic acid indicated that compound A 99,23% at a concentration ratio (1:8) and B 99,14% (1:4). This indicates a synergy between curcumin analogs and ferulic acid as an inhibitor of the α-amylase.

Development of QTMP: A promising anticancer agent through NP-Privileged Motif-Driven structural modulation

In this study of creating new molecules from clinical trial agents, an approach of Combretastatin structural modulation with the installation of NP-privileged motifs was considered, and a series of trimethoxyphenyl-2-aminoimidazole with functionalized quinolines and isoquinolines was investigated. An exciting method of quinoline C3-H iodination coupled with imidazopyridine-C3-H arylation and hydrazine-mediated fused-ring cleavage enabled synthesizing a class of compounds with two specific unsymmetric aryl substitutions. Interestingly, three compounds (6, 11, and 13) strongly inhibited HeLa cell proliferation with a half-maximal inhibitory concentration (10–46 nM). Among the compounds, compound 6 (QTMP) showed stronger antiproliferative ability than CA-4 (a clinical trial agent) in various cancer cell lines, including cervical, lung, breast, highly metastatic breast, and melanoma cells. QTMP inhibited the assembly of purified tubulin, depolymerized microtubules of A549 lung carcinoma cells, produced defective spindles, and arrested the cells in the G2/M phase. Further, QTMP binds to the colchicine site in tubulin with a dissociation constant of 5.0 ± 0.6 µM. QTMP displayed higher aqueous stability than CA-4 at 37 °C. Further, in silico analysis of QTMP indicated excellent drug-like properties, including good aqueous solubility, balanced hydrophilicity-lipophilicity, and high GI-absorption ability. The results together suggest that QTMP has anticancer potential.

Sensitivity of Taraxacum officinalis (L.) Weber ex F. H. Wigg Pollen to aerogenic pollution in the conditions of a mega city

Aim. To determine the consequences of the impact of automobile emissions on the environment of the city of Kyiv using the palynological method. Methods. The quality of Taraxacum officinalis (L.) Weber ex F. H. Wigg pollen was determined by the iodine method (Gram staining). All pollen grains without typical signs of morphological structure (that is, all but normally developed) were considered teratomorphic. Results. The effect of aerogenous load on the viability of Taraxacum officinalis plant pollen was studied at test sites of park ecosystems of the city of Kyiv with different traffic intensities and proximity to city highways. It was established that in the conditions of the metropolis under various effects of air pollution, the quality indicators of the pollen of the bioindicator remain high, within 77.79 % (test site No. 1, which is located closest to the highways, where Nox is 2.11 g/s, CH – 2,86 g/s) to 81.77 % (test site No. 2 in Mariinsky Park, which has the best environmental conditions: the mixture of nitrogen oxides is 0.41, which is almost five times less than at test site No. 1 in Peremohy Park). The largest share of teratomorphic pollen (34.98 %) was recorded in T. officinalis plants in Peremogy Park test site No. 1, the smallest (26.86 %) was found in plants growing in Mariinsky Park at test site No. 2. When analyzing the data, it was determined that a high level of inverse correlation has an indicator of the fertility of pollen grains with all investigated components of air pollution (r = from -0.57 – Pb compounds to -0.73 – soot). Conclusions. Therefore, the qualitative indicators of the pollen of the phytoindicator T. officinalis can be recommended for use in the system of ecological monitoring of the environment with different degrees of aerogenic load.

Analysis of phytochemical constituent and biological significance of rhododendrons collected from capital of Laliguras, Laliguras municipality, Tehrathum district, Nepal

The largest genus of the Ericaceae family, Rhododendron includes an inspiring number of species. Some of which have been used in the treatment of various ailments such as diseases associated with heart, dysentery, diarrhea, detoxification, fever, constipation, bronchitis and asthma around the world including Nepal. However, systematic study on phytochemistry and pharmacology of Rhododendrons grown in the Capital of Laliguras, Laliguras Municipality, Tehrathum of Nepal is lacking. So this study was conducted to evaluate the antioxidant activity, α-amylase inhibition activity, total phenolic and flavonoid contents of Rhododendron arboretum and Rhododendron campanulatum from Laliguras Municipality, Tehrathum of Nepal. Plant extracts were prepared in methanol by cold percolation method. Phytochemical constituents were analyzed by following standard methods. Antioxidant activity was measured through 2, 2-Diphenyl-1-Picrylhydrazyl assay. Total phenolic and flavonoid content were estimated using Folin–Ciocalteau and aluminum chloride method respectively. Alpha amylase inhibition assay was carried out by starch iodine method. Phytochemical screening of methanolic extract of flower and leaf of R. arboretum and leaves of R. campanulatum displayed the presence of different chemical constituents such as flavonoids, polyphenols, terpenoids, saponins and quinins. Samples showed dose-dependent radical scavenging and α-amylase inhibition activity. Radical scavenging activity and α-amylase inhibition activity of the methanolic extracts of different parts of R. arboretum and R. campanulatum ranged from 19.46 to 95.88% and 13.23 to 68.44% respectively. Flower extracts of R. arboreum showing the strongest radical scavenging activity and α-amylase inhibition with IC50 values 33.61 and 443.44 μg/mL respectively. Among the tested samples, flower extract of R. arboretum showed the strongest antioxidant activity, alpha amylase inhibition activity and contained the highest amount of total phenolic and flavonoid content.

Isolation of an Acidophilic Cellulolytic Bacterial Strain and Its Cellulase Production Characteristics

The aim of the study was to isolate and identify a highly efficient cellulolytic bacteria strain that can be used in acidic environments, and then investigate its cellulase production characteristics for the effective utilization of agricultural waste. For this purpose, we set a series of isolation and screening steps, 21 strains were isolated from soil, and an acidophilic strain labeled as B13-2 with high cellulase production was screened using the Gram’ iodine method and cellulase activity assay; it was identified as Raoultella terrigena. Lastly, the culture conditions such as incubation time, incubation temperature, pH, carbon sources, nitrogen sources, and inoculum size were optimized via single-factor experiments, and on this basis, the cellulase production of strain B13-2 was optimized using response surface methodology with cellulase activity as the optimization goal. The results of the response surface optimization showed that the optimum incubation time is 3.1 days, the optimum temperature is 29.9 °C, the optimum pH is 4.1, and the optimum inoculum size is 1.50%, the cellulase activity reached a maximum of 13.503 U/mL, which was about 140% higher than that before optimization. In particular, strain B13-2 had higher cellulase production when rice straws were used as the natural carbon source. Meanwhile, the SEM pictures demonstrated that the surface of the substrate rice straws in an acidic buffer with strain B13-2 was uneven, with larger holes than in the neutral buffer after incubation. It further proved that this strain has a stronger ability to degrade cellulose under acidic conditions. The B13-2 is a kind of acidophilic cellulolytic bacteria. Therefore, it has the potential to be developed into a silage additive agent and provides a high-quality strain resource for the high-value biotransformation of agricultural waste and lays a certain foundation for the sustainable development of agricultural cultivation.

Highly efficient electroextraction of gold and simultaneous iodine regeneration using ionic liquid 1-ethyl-3-methylimidazolium dicyanamide

The iodination method is a cyanide-free and efficient gold-leaching process, but a large amount of electric energy is consumed for hydrogen evolution during the process of gold recovery by electrodeposition in the iodide/H2O system. Herein, [C2MIM][N(CN)2] ionic liquids were developed as electrolytes to overcome the limitations of water-based solvents for higher current efficiency by extending the electrochemical window. And the three-dimensional carbon felt with a high surface area and abundant active sites was selected as the cathode material to enhance the deposition rate. Cyclic voltammetry test demonstrated that both Au+ reduction and I- oxidation are irreversible processes controlled by diffusion with the diffusion coefficients of 1.48 × 10-7 cm2/s and 2.91 × 10-7 cm2/s at 20 °C, respectively. The optimal current efficiency (88.03%), specific energy consumption (216.37 kWh/t) and recovery of gold (95.77%), and iodine (85.75%) were obtained by regulating the electrodeposition parameters, including applied potential, temperature, and stirring speed. Moreover, the gold leaching and deposition efficiency were stable at approximately 93% and 95% with 0.2% iodine supplement for four cyclic leaching-electrodeposition. SEM-EDS, XRD, and XPS analysis showed the deposits on the carbon fibers had good uniformity, and the deposit composition contained Au0, Cu0, and CuO. [C2MIM][N(CN)2] ionic liquid is an attractive alternative to non-concentrated aqueous electrolytes for high-efficiency and low-power electrodeposition applications.

In vitro and in vivo Pharmacological Studies of Leaves of Staurogyne argentea Wall.

Staurogyne argentea Wall. (Family: Acanthaceae) is an important medicinal plant that has many traditional uses in tribal areas of Bangladesh. The current study emphasizes the pharmacological investigations of n-hexane, chloroform and aqueous soluble fractions of ethanol extract of leaves of S. argentea to justify the traditional uses of this plant species in Bangladesh. In vitro anti-inflammatory activity of S. argentea was confirmed by inhibition of egg albumin denaturation and erythrocyte membrane stabilizing methods. In both experiments, the aqueous fraction at concentration of 160 μg/ml exhibited significant inhibition of egg albumin denaturation by 76.91% with IC50 value of 24.22 μg/ml compared to standard Diclofenac-Na. In membrane stabilization assay, the aqueous fraction showed prominent anti-inflammatory activity by protecting the human erythrocyte membrane against hypotonic solution induced lysis. In addition, among all the aqueous fraction at 100 μg/ml also showed maximum antioxidant potential via the inhibition of DPPH scavenging by 75.05% (IC50= 42.92 μg/ml). The test materials were subjected to evaluate for the anti-diabetic activity by both in vitro starch iodine method as well as by oral glucose tolerance test in Swiss albino mice. In both experiments, the aqueous fraction showed maximum blood glucose lowering activity which is comparable to standard glibenclamide. The chloroform fraction (Conc. 500 mg/kg bw) exhibited moderate inhibition of both acetic acid-induced writhing reflex and yeast-induced pyrexia in mice. During sedative activity screening, different solvent fractions produced mild to moderate activity in comparison with standard diazepam. These findings revealed that S. argentea is a valuable source of bioactive compounds with diverge pharmacological actions, which validates its use in Bangladesh folk medicinal practices. Bangladesh Pharmaceutical Journal 26(1): 89-98, 2023 (January)

Histological, immunohistochemical and ultrastructural features of polyglucosan bodies in uterine smooth muscle of pet rabbits (Oryctolaguscuniculus)

We document the frequency and morphological and immunohistochemical features of inclusion bodies in uterine smooth muscle cells in 56 (76%) of 74 investigated pet rabbits (Oryctolagus cuniculus). Inclusion bodies began to appear at the age of 2 years and their frequency increased with age (P = 0.047, r = 0.33). They ranged from 5 to 20 μm in diameter, were slightly basophilic to amphophilic with well-delimited oval bodies in haematoxylin and eosin-stained tissue sections and formed in the cytoplasm of the uterine smooth muscle cells with displacement of the cell nuclei. The inclusion bodies were positive with periodic acid–Schiff, Best's carmine, Lugol's iodine and Grocott's methenamine silver methods. They were immunoreactive to a monoclonal antibody raised against human polyglucosan and negative with monoclonal antibodies for several intermediate filament proteins. Electron microscopy revealed that they were non-membranous structures composed of electron-dense amorphous material. The morphological, histochemical, immunohistochemical and ultrastructural features of the inclusion bodies in the rabbi uteri were similar to those of human polyglucosan bodies (PGBs). PGBs appear to occur at a high frequency in the uterus of rabbits, which are known to be susceptible to uterine diseases.

An Improved Synthetic Method for Sensitive Iodine Containing Tricyclic Flavonoids

The synthesis of new iodine containing synthetic tricyclic flavonoids is reported. Due to the sensitivity of the precursors to the heat and acidic conditions required for the ring closure of the 1,3-dithiolium core, a new cyclization method has been developed. It consists in the treatment of the corresponding iodine-substituted 3-dithiocarbamic flavonoids with a 1:1 (v/v) mixture of glacial acetic acid-concentrated sulfuric acid at 40 °C. The synthesis of the iodine-substituted 3-dithiocarbamic flavonoids has also been tuned in terms of reaction conditions.