Intron Endonuclease Research Articles

An intron endonuclease facilitates interference competition between coinfecting viruses.

Introns containing homing endonucleases are widespread in nature and have long been assumed to be selfish elements that provide no benefit to the host organism. These genetic elements are common in viruses, but whether they confer a selective advantage is unclear. In this work, we studied intron-encoded homing endonuclease gp210 in bacteriophage ΦPA3 and found that it contributes to viral competition by interfering with the replication of a coinfecting phage, ΦKZ. We show that gp210 targets a specific sequence in ΦKZ, which prevents the assembly of progeny viruses. This work demonstrates how a homing endonuclease can be deployed in interference competition among viruses and provide a relative fitness advantage. Given the ubiquity of homing endonucleases, this selective advantage likely has widespread evolutionary implications in diverse plasmid and viral competition as well as virus-host interactions.

Phage T4 endonuclease SegD that is similar to group I intron endonucleases does not initiate homing of its own gene

Homing endonucleases are a group of site-specific endonucleases that initiate homing, a nonreciprocal transfer of its own gene into a new allele lacking this gene. This work describes a novel phage T4 endonuclease, SegD, which is homologous to the GIY-YIG family of homing endonucleases. Like other T4 homing endonucleases SegD recognizes an extended, 16bp long, site, cleaves it asymmetrically to form 3′-protruding ends and digests both unmodified DNA and modified T-even phage DNA with similar efficiencies. Surprisingly, we revealed that SegD cleavage site was identical in the genomes of segD– and segD+ phages. We found that segD gene was expressed during the T4 developmental cycle. Nevertheless, endonuclease SegD was not able to initiate homing of its own gene as well as genetic recombination between phages in its site inserted into the rII locus.

A decades-long journey with mobile introns.

A decades-long journey with mobile introns.

Identification of highly-disrupted tRNA genes in nuclear genome of the red alga, Cyanidioschyzon merolae 10D

The limited locations of tRNA introns are crucial for eukaryal tRNA-splicing endonuclease recognition. However, our analysis of the nuclear genome of an early-diverged red alga, Cyanidioschyzon merolae, demonstrated the first evidence of nuclear-encoded tRNA genes that contain ectopic and/or multiple introns. Some genes exhibited both intronic and permuted structures in which the 3′-half of the tRNA coding sequence lies upstream of the 5′-half, and an intron is inserted into either half. These highly disrupted tRNA genes, which account for 63% of all nuclear tRNA genes, are expressed via the orderly and sequential processing of bulge-helix-bulge (BHB) motifs at intron-exon junctions and termini of permuted tRNA precursors, probably by a C. merolae tRNA-splicing endonuclease with an unidentified subunit architecture. The results revealed a considerable diversity in eukaryal tRNA intron properties and endonuclease architectures, which will help to elucidate the acquisition mechanism of the BHB-mediated disrupted tRNA genes.

I-PfoP3I: A Novel Nicking HNH Homing Endonuclease Encoded in the Group I Intron of the DNA Polymerase Gene in Phormidium foveolarum Phage Pf-WMP3

Homing endonucleases encoded in a group I self-splicing intron in a protein-coding gene in cyanophage genomes have not been reported, apart from some free-standing homing edonucleases. In this study, a nicking DNA endonuclease, I-PfoP3I, encoded in a group IA2 intron in the DNA polymerase gene of a T7-like cyanophage Pf-WMP3, which infects the freshwater cyanobacterium Phormidium foveolarum is described. The Pf-WMP3 intron splices efficiently in vivo and self-splices in vitro simultaneously during transcription. I-PfoP3I belongs to the HNH family with an unconventional C-terminal HNH motif. I-PfoP3I nicks the intron-minus Pf-WMP3 DNA polymerase gene more efficiently than the Pf-WMP4 DNA polymerase gene that lacks any intervening sequence in vitro, indicating the variable capacity of I-PfoP3I. I-PfoP3I cleaves 4 nt upstream of the intron insertion site on the coding strand of EXON 1 on both intron-minus Pf-WMP3 and Pf-WMP4 DNA polymerase genes. Using an in vitro cleavage assay and scanning deletion mutants of the intronless target site, the minimal recognition site was determined to be a 14 bp region downstream of the cut site. I-PfoP3I requires Mg2+, Ca2+ or Mn2+ for nicking activity. Phylogenetic analysis suggests that the intron and homing endonuclease gene elements might be inserted in Pf-WMP3 genome individually after differentiation from Pf-WMP4. To our knowledge, this is the first report of the presence of a group I self-splicing intron encoding a functional homing endonuclease in a protein-coding gene in a cyanophage genome.

Evolutionary Dynamics of the mS952 Intron: A Novel Mitochondrial Group II Intron Encoding a LAGLIDADG Homing Endonuclease Gene

Examination of the mitochondrial small subunit ribosomal RNA (rns) gene of five species of the fungal genus Leptographium revealed that the gene has been invaded at least once at position 952 by a group II intron encoding a LAGLIDADG homing endonuclease gene. Phylogenetic analyses of the intron and homing endonuclease sequences indicated that each element in Leptographium species forms a single clade and is closely related to the group II intron/homing endonuclease gene composite element previously reported at position 952 of the mitochondrial rns gene of Cordyceps species and of Cryphonectria parasitica. The results of an intron survey of the mt rns gene of Leptographium species superimposed onto the phylogenetic analysis of the host organisms suggest that the composite element was transmitted vertically in Leptographium lundbergii. However, its stochastic distribution among strains of L. wingfieldii, L. terebrantis, and L. truncatum suggests that it has been horizontally transmitted by lateral gene transfer among these species, although the random presence of the intron may reflect multiple random loss events. A model is proposed describing the initial invasion of the group II intron in the rns gene of L. lundbergii by a LAGLIDADG homing endonuclease gene and subsequent evolution of this gene to recognize a novel DNA target site, which may now promote the mobility of the intron and homing endonuclease gene as a composite element.

Redox-Responsive Zinc Finger Fidelity Switch in Homing Endonuclease and Intron Promiscuity in Oxidative Stress

It is well understood how mobile introns home to allelic sites, but how they are stimulated to transpose to ectopic locations on an evolutionary timescale is unclear. Here we show that a group I intron can move to degenerate sites under oxidizing conditions. The phage T4 td intron endonuclease, I-TevI, is responsible for this infidelity. We demonstrate that I-TevI, which promotes mobility and is subject to autorepression and translational control, is also regulated posttranslationally by a redox mechanism. Redox regulation is exercised by a zinc finger (ZF) in a linker that connects the catalytic domain of I-TevI to the DNA binding domain. Four cysteines coordinate Zn(2+) in the ZF, which ensures that I-TevI cleaves its DNA substrate at a fixed distance, 23-25 nucleotides upstream of the intron insertion site. We show that the fidelity of I-TevI cleavage is controlled by redox-responsive Zn(2+) cycling. When the ZF is mutated, or after exposure of the wild-type I-TevI to H(2)O(2), intron homing to degenerate sites is increased, likely because of indiscriminate DNA cleavage. These results suggest a mechanism for rapid intron dispersal, joining recent descriptions of the activation of biomolecular processes by oxidative stress through cysteine chemistry.

Optimizing conditions for cleavage of pre‐tRNA‐Gln(CAA) by Haloferax volcanii tRNA intron endonuclease

In the halophilic archaeon Haloferax volcanii, tRNA intron endonuclease is known to cleave precursor tRNAs at a specific bulge‐helix‐bulge (BHB) motif. The enzyme cleaves pre‐tRNA‐Trp into a 103 nucleotide intron and two exons that are subsequently spliced at position 37/38. To explore the substrate specificity of the enzyme, pre‐tRNA‐Gln(CCA) has been subjected to cleavage by tRNA intron endonuclease under various conditions. Pre‐tRNA‐Gln(CCA) contains a shorter intron of 31 nucleotides, but can still adopt a BHB motif. Optimal cleavage conditions appear to be 40 mM Tris‐HCl pH 7.4, 2% glycerol, 20 mM MgCl2 and 2 M KCl. The enzyme activity is not sensitive to moderate pH changes or MgCl2 concentration between 5 mM and 50 mM. Ionic strength is important with increasing activity observed at higher KCl concentrations from 200 mM to 2M KCl and no cleavage observed below 200 mM KCl. These studies will allow for additional exploration of substrate specificity including sequence variation in the RNA substrate. This work will lead to a better understanding of tRNA processing in archaea.

Distance determination by GIY-YIG intron endonucleases: discrimination between repression and cleavage functions

GIY-YIG homing endonucleases are modular proteins, with conserved N-terminal catalytic domains connected by linkers to C-terminal DNA-binding domains. I-TevI, the T4 phage GIY-YIG intron endonuclease, functions both in promoting td intron homing, and in acting as a transcriptional autorepressor. Repression is achieved by binding to an operator, which is cleaved at 100-fold reduced efficiency relative to the intronless homing site. The linker includes a zinc finger, which functions in distance determination, to constrain the catalytic domain to cleave the homing site at a fixed position. Here we show that I-BmoI, a related GIY-YIG endonuclease lacking a zinc finger, also possesses some cleavage distance discrimination. Furthermore, hybrid endonucleases constructed by swapping the domains of I-BmoI and I-TevI are active, precise and demonstrate that features other than the zinc finger facilitate distance determination. Most importantly, I-TevI zinc finger mutants cleave the operator more efficiently than the homing site, the converse of wild-type protein. These results are consistent with the zinc finger acting as a measuring device, directing efficient cleavage of the homing site to promote intron mobility, while reducing cleavage at the operator to ensure transcriptional autorepression and phage viability.

Coincidence of Cleavage Sites of Intron Endonuclease I-TevI and Critical Sequences of the Host Thymidylate Synthase Gene

To maximize spread of their host intron or intein, many homing endonucleases recognize nucleotides that code for important and conserved amino acid residues of the target gene. Here, we examine the cleavage requirements for I-TevI, which binds a stretch of thymidylate synthase (TS) DNA that codes for functionally critical residues in the TS active site. Using an in vitro selection scheme, we identified two base-pairs in the I-TevI cleavage site region as important for cleavage efficiency. These were confirmed by comparison of I-TevI cleavage efficiencies on mutant and on wild-type substrates. We also showed that nicking of the bottom strand by I-TevI is not affected by mutation of residues surrounding the bottom-strand cleavage site, unlike other homing endonucleases. One of these two base-pairs is universally conserved in all TS sequences, and is identical with a previously identified cleavage determinant of I-BmoI, a related GIY-YIG endonuclease that binds a homologous stretch of TS-encoding DNA. The other base-pair is conserved only in a subset of TS genes that includes the I-TevI, but not the I-BmoI, target sequence. Both the I-TevI and I-BmoI cleavage site requirements correspond to functionally critical residues involved in an extensive hydrogen bond network within the TS active site. Remarkably, these cleavage requirements correlate with TS phylogeny in bacteria, suggesting that each endonuclease has individually adapted to efficiently cleave distinct TS substrates.

Catalytic domain structure and hypothesis for function of GIY-YIG intron endonuclease I-TevI.

I-TevI, a member of the GIY-YIG family of homing endonucleases, consists of an N-terminal catalytic domain and a C-terminal DNA-binding domain joined by a flexible linker. The GIY-YIG motif is in the N-terminal domain of I-TevI, which corresponds to a phylogenetically widespread catalytic cartridge that is often associated with mobile genetic elements. The crystal structure of the catalytic domain of I-TevI, the first of any GIY-YIG endonuclease, reveals a novel alpha/beta-fold with a central three-stranded antiparallel beta-sheet flanked by three helices. The most conserved and putative catalytic residues are located on a shallow, concave surface and include a metal coordination site. Similarities in the three-dimensional arrangement of the catalytically important residues and the cation-binding site with those of the His-Cys box endonuclease I-PpoI suggest the possibility of mechanistic relationships among these different families of homing endonucleases despite completely different folds.

Measure for measure: a zinc finger ruler

Intervening sequences encoding introns or inteins are transferred laterally between homologous alleles in a mechanism termed ‘homing’. Homing endonucleases are the class of enzymes that trigger homing by catalyzing double-strand DNA breaks at target sequences. Over 250 homing endonucleases have been identified; they are encoded by open reading frames (ORFs) within the mobile intervening sequences.In contrast to restriction endonucleases, which typically function as dimers and cleave palindromic DNA sequences of 4–8 bp, homing endonucleases are small monomeric proteins that recognize longer more variable sequences. For example, the homing endonuclease I-TevI, encoded by the td intron of phage T4, is a 28 kD protein that recognizes a target site of 37 bp. Double-strand cleavage occurs 23–25 bp upstream from this homing site. I-TevI contains two functionally distinct domains, an N-terminal catalytic domain and a C-terminal binding domain, joined by a long flexible linker. Limited insertions and deletions between the recognition sequence and cleavage site are tolerated, indicating that the linker extends and retracts to locate the cleavage site. A crystal structure of the DNA-binding domain bound to its target sequence revealed an unexpected Cys-4 zinc finger subdomain. As demonstrated by Marlene Belfort and colleagues, this zinc finger acts as a molecular ruler between the homing and cleavage sites on the target DNA [1xZinc finger as distance determinant in the flexible linker of intron endonuclease I-TevI. Dean, A.B. et al. Proc. Natl. Acad. Sci. U. S. A. 2002; 99: 8554–8561Crossref | PubMed | Scopus (37)See all References][1].Although previously classified as part of the C-terminal binding domain, the zinc finger is dispensable for binding. To determine its contribution to endonuclease function, Belfort et al. constructed mutants of I-TevI in which the zinc finger was deleted or zinc chelation impaired by substituting one or more cysteines with alanine. DNA variants were also constructed with insertions or deletions between the homing and cleavage sites. The wild-type protein compensates for small insertions or deletions, but primarily cleaves the DNA a fixed distance from the homing site. By contrast, protein variants lacking an intact zinc finger cleave at the wild-type DNA sequence with less regard for distance. The protein does not simply use linker length to determine cleavage position. A mutant lacking the entire zinc finger (a 19 aa deletion) cleaves at the wild-type sequence even when it is further from the binding site owing to nucleotide insertions; that is, the linker ‘stretches out’ to find the preferred cleavage sequence. In the presence of the zinc finger, distance dominates, but without this motif, sequence overrides distance. The authors present a model in which the zinc finger organizes the linker between the catalytic and binding domains of the endonuclease.Zinc fingers typically bind in the major groove of DNA, as in the sequential Cys-2/His-2 zinc fingers of Zif268. The zinc finger of I-TevI, however, does not contribute significantly to binding energy. Indeed, the major groove of T4 DNA is effectively blocked by glycosylation of 5-hydroxymethylcytosine. Zinc fingers also mediate protein–protein interactions, although, to date, there is no evidence that other proteins are required for endonuclease activity. This function of a zinc finger as a distance determinant appears novel even among closely related homing endonucleases; it will be interesting to see whether zinc fingers exist in such a role in other modular proteins.

Zinc finger as distance determinant in the flexible linker of intron endonuclease I-TevI.

I-TevI, the phage T4 td intron-encoded endonuclease, recognizes a lengthy DNA target and initiates intron mobility by introducing a double-strand break in the homing site. The enzyme uses both sequence and distance determinants to cleave the DNA 23-25 bp upstream of the intron insertion site. I-TevI consists of an N-terminal catalytic domain and a C-terminal DNA-binding domain separated by a long, flexible linker. The DNA-binding domain consists of three subdomains: a zinc finger, a minor-groove binding alpha-helix, and a helix-turn-helix. In this study, a mutational analysis was undertaken to assess the roles of these subdomains in substrate binding and cleavage. Surprisingly, the zinc finger is not required for DNA binding or catalysis. Rather, the zinc finger is a component of the linker and directs the catalytic domain to cleave the homing site at a fixed distance from the intron insertion site. When the cleavage site (CS) is shifted outside a given range, wild-type I-TevI defaults to the fixed distance, whereas zinc-finger mutants have lost the distance determinant and search out the displaced cleavage sequences. Although counterintuitive, a protein containing a 19-aa deletion of the zinc finger can extend further than can wild-type I-TevI to cleave a distant CS sequence, and a Cys-to-Ala mutant of the ligands for zinc, nominally a longer protein, can retract to cleave at a closer CS sequence. Models are presented for the novel function of the zinc finger, as a molecular constraint, whereby intramolecular protein-protein interactions position the catalytic domain by "catalytic clamp" and/or "linker-organizer" mechanisms.

Intertwined structure of the DNA-binding domain of intron endonuclease I-TevI with its substrate.

I-TevI is a site-specific, sequence-tolerant intron endonuclease. The crystal structure of the DNA-binding domain of I-TevI complexed with the 20 bp primary binding region of its DNA target reveals an unusually extended structure composed of three subdomains: a Zn finger, an elongated segment containing a minor groove-binding alpha-helix, and a helix-turn-helix. The protein wraps around the DNA, mostly following the minor groove, contacting the phosphate backbone along the full length of the duplex. Surprisingly, while the minor groove-binding helix and the helix-turn- helix subdomain make hydrophobic contacts, the few base-specific hydrogen bonds occur in segments that lack secondary structure and flank the intron insertion site. The multiple base-specific interactions over a long segment of the substrate are consistent with the observed high site specificity in spite of sequence tolerance, while the modular composition of the domain is pertinent to the evolution of homing endonucleases.

Interaction of a group II intron ribonucleoprotein endonuclease with its DNA target site investigated by DNA footprinting and modification interference

Group II intron mobility occurs by a target DNA-primed reverse transcription mechanism in which the intron RNA reverse splices directly into one strand of a double-stranded DNA target site, while the intron-encoded protein cleaves the opposite strand and uses it as a primer to reverse transcribe the inserted intron RNA. The group II intron endonuclease, which mediates this process, is an RNP particle that contains the intron-encoded protein and the excised intron RNA and uses both cooperatively to recognize DNA target sequences. Here, we analyzed the interaction of the Lactococcus lactis Ll.LtrB group II intron endonuclease with its DNA target site by DNA footprinting and modification-interference approaches. In agreement with previous mutagenesis experiments showing a relatively large target site, DNase I protection extends from position −25 to +19 from the intron-insertion site on the top strand and from −28 to +16 on the bottom strand. Our results suggest that the protein first recognizes a small number of specific bases in the distal 5′-exon region of the DNA target site via major-groove interactions. These base interactions together with additional phosphodiester-backbone interactions along one face of the helix promote DNA unwinding, enabling the intron RNA to base-pair to DNA top-strand positions −12 to +3 for reverse splicing. Notably, DNA unwinding extends to at least position +6, somewhat beyond the region that base-pairs with the intron RNA, but is not dependent on interaction of the conserved endonuclease domain with the 3′ exon. Bottom-strand cleavage occurs after reverse splicing and requires recognition of a small number of additional bases in the 3′ exon, the most critical being T+5 in the now single-stranded downstream region of the target site. Our results provide the first detailed view of the interaction of a group II intron endonuclease with its DNA target site.

A novel group I intron-encoded endonuclease specific for the anticodon region of tRNAfMet genes

Open reading frames (ORFs) are frequently inserted into group I self-splicing introns. These ORFs encode either maturases that are required for splicing of the intron or DNA endonucleases that promote intron mobility. A self-splicing intron in the tRNAfMet gene of Synechocystis PCC 6803, which has been proposed to have moved laterally within the cyanobacteria, contains an ORF that is unrelated to known intron-encoded endonucleases or maturases. Here, using an in vitro transcription–translation system, we show that this intronic ORF encodes a double-strand DNA endonuclease, I-Ssp6803I. I-Ssp6803I cleaves each strand of the intronless tRNAfMet gene adjacent to the anticodon triplet leaving 3 bp 3′ extensions and has no activity at intron–exon boundaries. Using an in vitro cleavage assay and scanning deletion mutants of the intronless target site, the minimal recognition site was determined to be a partially palindromic 20 bp region encompassing the entire anticodon stem and loop of the tRNAfMet gene. I-Ssp6803I represents a novel intron-encoded DNA endonuclease and is the first example of a chromosomally encoded group I intron endonuclease in bacteria.

A novel group I intron‐encoded endonuclease specific for the anticodon region of tRNAfMet genes

Open reading frames (ORFs) are frequently inserted into group I self-splicing introns. These ORFs encode either maturases that are required for splicing of the intron or DNA endonucleases that promote intron mobility. A self-splicing intron in the tRNA(fMet) gene of Synechocystis PCC 6803, which has been proposed to have moved laterally within the cyanobacteria, contains an ORF that is unrelated to known intron-encoded endonucleases or maturases. Here, using an in vitro transcription-translation system, we show that this intronic ORF encodes a double-strand DNA endonuclease, I-Ssp6803I. I-Ssp6803I cleaves each strand of the intronless tRNA(fMet) gene adjacent to the anticodon triplet leaving 3 bp 3' extensions and has no activity at intron-exon boundaries. Using an in vitro cleavage assay and scanning deletion mutants of the intronless target site, the minimal recognition site was determined to be a partially palindromic 20 bp region encompassing the entire anticodon stem and loop of the tRNA(fMet) gene. I-Ssp6803I represents a novel intron-encoded DNA endonuclease and is the first example of a chromosomally encoded group I intron endonuclease in bacteria.

Expression of the Naegleria intron endonuclease is dependent on a functional group I self-cleaving ribozyme.

NaSSU1 is a complex nuclear group I intron found in several species of Naegleria, consisting of a large self-splicing group I ribozyme (NaGIR2), which itself is interrupted by a small, group I-like ribozyme (NaGIR1) and an open reading frame (ORF) coding for a homing endonuclease. The GIR1 ribozyme cleaves in vitro transcripts of NaSSU1 at two internal processing sites about 400 nt downstream of the 5' end of the intron, proximal to the endonuclease ORF. Here we demonstrate that self-cleavage of the excised intron also occurs in vivo in Naegleria gruberi, generating an ORF-containing RNA that possesses a short leader with a sequence element likely to be involved in gene expression. To assess the functional significance of self-cleavage, we constructed a genetic system in Saccharomyces cerevisiae. First, a mutant yeast strain was selected with a mutation in all the rRNA genes, rendering the rDNA resistant to cleavage by the Naegleria endonuclease. Active endonuclease, which is otherwise lethal, could be expressed readily in these cells. Endonuclease activity also could be detected in extracts of yeast harboring plasmids in which the endonuclease ORF was embedded in its native context in the intron. Analysis of the RNA from these yeast cells showed that the excised intron RNA was processed as in N. gruberi. A mutant intron constructed to prevent self-cleavage of the RNA failed to express endonuclease activity. These results support the hypothesis that the NaGIR1-catalyzed self-cleavage of the intron RNA is a key event in expression of the endonuclease.

Genetic analysis of the Chlamydomonas reinhardtii I-CreI mobile intron homing system in Escherichia coli.

We have developed and used a genetic selection system in Escherichia coli to study functional requirements for homing site recognition and cleavage by a representative eukaryotic mobile intron endonuclease. The homing endonuclease, I-CreI, was originally isolated from the chloroplast of the unicellular green alga Chlamydomonas reinhardtii. I-CreI homing site mutants contained base pair substitutions or single base deletions that altered the rate of homing site cleavage and/or product release. I-CreI endonuclease mutants fell into six phenotypic classes that differed in in vivo activity, toxicity or genetic dominance. Inactivating mutations clustered in the N-terminal 60% of the I-CreI amino acid sequence, and two frameshift mutations were isolated that resulted in premature translation termination though retained partial activity. These mutations indicate that the N-terminal two-thirds of the I-CreI endonuclease is sufficient for homing site recognition and cleavage. Substitution mutations altered in four potential active site residues were examined: D20N, Q47H or R70A substitutions inactivated endonuclease activity, whereas S22A did not. The genetic approach we have taken complements phylogenetic and structural studies of mobile intron endonucleases and has provided new information on the mechanistic basis of I-CreI homing site recognition and cleavage.

Group II intron endonucleases use both RNA and protein subunits for recognition of specific sequences in double-stranded DNA.

Group II introns use intron-encoded reverse transcriptase, maturase and DNA endonuclease activities for site-specific insertion into DNA. Remarkably, the endonucleases are ribonucleoprotein complexes in which the excised intron RNA cleaves the sense strand of the recipient DNA by reverse splicing, while the intron-encoded protein cleaves the antisense strand. Here, studies with the yeast group II intron aI2 indicate that both the RNA and protein components of the endonuclease contribute to recognition of an approximately 30 bp DNA target site. Our results lead to a model in which the protein component first recognizes specific nucleotides in the most distal 5' exon region of the DNA target site (E2-21 to -11). Binding of the protein then leads to DNA unwinding, enabling the intron RNA to base pair to a 13 nucleotide DNA sequence (E2-12 to E3+1) for reverse splicing. Antisense-strand cleavage requires additional interactions of the protein with the 3' exon DNA (E3+1 to +10). Our results show how enzymes can use RNA and protein subunits cooperatively to recognize specific sequences in double-stranded DNA.