Intron Core Research Articles

Reflections on 20 years of RNA folding, dynamics, and structure.

Reflections on 20 years of RNA folding, dynamics, and structure.

Wait and capture: unwinding the strategy of a DEAD-box helicase.

Wait and capture: unwinding the strategy of a DEAD-box helicase.

Principles of ion recognition in RNA: insights from the group II intron structures

Metal ions promote both RNA folding and catalysis, thus being essential in stabilizing the structure and determining the function of large RNA molecules, including group II introns. The latter are self-splicing metalloribozymes, containing a heteronuclear four-metal-ion center within the active site. In addition to these catalytic ions, group II introns bind many other structural ions, including delocalized ions that bind the RNA diffusively and well-ordered ions that bind the RNA tightly with high occupancy. The latter ions, which can be studied by biophysical methods, have not yet been analyzed systematically. Here, we compare crystal structures of the group IIC intron from Oceanobacillus iheyensis and classify numerous site-bound ions, which are primarily localized in the intron core and near long-range tertiary contacts. Certain ion-binding sites resemble motifs observed in known RNA structures, while others are idiosyncratic to the group II intron. Particularly interesting are (1) ions proximal to the active site, which may participate in splicing together with the catalytic four-metal-ion center, (2) organic ions that bind regions predicted to interact with intron-encoded proteins, and (3) unusual monovalent ions bound to GU wobble pairs, GA mismatches, the S-turn, the tetraloop-receptor, and the T-loop. Our analysis extends the general principles by which ions participate in RNA structural organization and it will aid in the determination and interpretation of future RNA structures.

Dual roles for the Mss116 cofactor during splicing of the ai5γ group II intron

The autocatalytic group II intron ai5γ from Saccharomyces cerevisiae self-splices under high-salt conditions in vitro, but requires the assistance of the DEAD-box protein Mss116 in vivo and under near-physiological conditions in vitro. Here, we show that Mss116 influences the folding mechanism in several ways. By comparing intron precursor RNAs with long (∼300 nt) and short (∼20 nt) exons, we observe that long exon sequences are a major obstacle for self-splicing in vitro. Kinetic analysis indicates that Mss116 not only mitigates the inhibitory effects of long exons, but also assists folding of the intron core. Moreover, a mutation in conserved Motif III that impairs unwinding activity (SAT → AAA) only affects the construct with long exons, suggesting helicase unwinding during exon unfolding, but not in intron folding. Strong parallels between Mss116 and the related protein Cyt-19 from Neurospora crassa suggest that these proteins form a subclass of DEAD-box proteins that possess a versatile repertoire of diverse activities for resolving the folding problems of large RNAs.

Introducing Intron Locus cox1i624 for Phylogenetic Analyses in Bryophytes: On the Issue of Takakia as Sister Genus to All Other Extant Mosses

Liverworts are well supported as the sister group to all other land plants (embryophytes) by molecular data. Observations strongly supporting this earliest dichotomy in embryophyte evolution are the strikingly different introns occurring in the mitochondrial DNAs of liverworts versus non-liverwort embryophytes (NLE), including the mosses. A final conclusion on the most basal lineages of mosses, for which genera such as Sphagnum and Takakia are the most likely candidates, is lacking. We have now investigated cox1i624, a mitochondrial group I intron conserved between the moss Physcomitrella patens and the liverwort Marchantia polymorpha. Focusing on a sampling of liverwort and moss genera, which had previously been identified as early branching taxa in their respective clades, we find that group I intron cox1i624 is universally conserved in all 33 mosses and 11 liverworts investigated. The group I intron core secondary structure is well conserved between the two ancient land plant clades. However, whereas dramatic size reductions are seen in the moss phylogeny, exactly the opposite is observed for liverworts. The cox1i624g1 locus was used for phylogenetic tree reconstruction also in combination with data sets of nad5i753g1 as well as chloroplast loci rbcL and rps4. The phylogenetic analyses revealed (i) very good support for the Treubiopsida as sister clade to all other liverworts, (ii) a sister group relationship of the nematodontous Tetraphidopsida and Polytrichopsida and (iii) two rivalling hypotheses about the basal-most moss genus with mitochondrial loci suggesting an isolated Takakia as sister to all other mosses and chloroplast loci indicating a Takakia-Sphagnum clade.

Genetic identification of potential RNA-binding regions in a group II intron-encoded reverse transcriptase

Mobile group II introns encode a reverse transcriptase that binds the intron RNA to promote RNA splicing and intron mobility, the latter via reverse splicing of the excised intron into DNA sites, followed by reverse transcription. Previous work showed that the Lactococcus lactis Ll.LtrB intron reverse transcriptase, denoted LtrA protein, binds with high affinity to DIVa, a stem-loop structure at the beginning of the LtrA open reading frame and makes additional contacts with intron core regions that stabilize the active RNA structure for forward and reverse splicing. LtrA's binding to DIVa down-regulates its translation and is critical for initiation of reverse transcription. Here, by using high-throughput unigenic evolution analysis with a genetic assay in which LtrA binding to DIVa down-regulates translation of GFP, we identified regions at LtrA's N terminus that are required for DIVa binding. Then, by similar analysis with a reciprocal genetic assay, we confirmed that residual splicing of a mutant intron lacking DIVa does not require these N-terminal regions, but does require other reverse transcriptase (RT) and X/thumb domain regions that bind the intron core. We also show that N-terminal fragments of LtrA by themselves bind specifically to DIVa in vivo and in vitro. Our results suggest a model in which the N terminus of nascent LtrA binds DIVa of the intron RNA that encoded it and nucleates further interactions with core regions that promote RNP assembly for RNA splicing and intron mobility. Features of this model may be relevant to evolutionarily related non-long-terminal-repeat (non-LTR)-retrotransposon RTs.

A structural analysis of the group II intron active site and implications for the spliceosome

Group II introns are self-splicing, mobile genetic elements that have fundamentally influenced the organization of terrestrial genomes. These large ribozymes remain important for gene expression in almost all forms of bacteria and eukaryotes and they are believed to share a common ancestry with the eukaryotic spliceosome that is required for processing all nuclear pre-mRNAs. The three-dimensional structure of a group IIC intron was recently determined by X-ray crystallography, making it possible to visualize the active site and the elaborate network of tertiary interactions that stabilize the molecule. Here we describe the molecular features of the active site in detail and evaluate their correspondence with prior biochemical, genetic, and phylogenetic analyses on group II introns. In addition, we evaluate the structural significance of RNA motifs within the intron core, such as the major-groove triple helix and the domain 5 bulge. Having combined what is known about the group II intron core, we then compare it with known structural features of U6 snRNA in the eukaryotic spliceosome. This analysis leads to a set of predictions for the molecular structure of the spliceosomal active site.

Protein Roles in Group I Intron RNA Folding: The Tyrosyl-tRNA Synthetase CYT-18 Stabilizes the Native State Relative to a Long-Lived Misfolded Structure without Compromising Folding Kinetics

The Neurospora crassa CYT-18 protein is a mitochondrial tyrosyl-tRNA synthetase that also promotes self-splicing of group I intron RNAs by stabilizing the functional structure in the conserved core. CYT-18 binds the core along the same surface as a common peripheral element, P5abc, suggesting that CYT-18 can replace P5abc functionally. In addition to stabilizing structure generally, P5abc stabilizes the native conformation of the Tetrahymena group I intron relative to a globally similar misfolded conformation that has only local differences within the core and is populated significantly at equilibrium by a ribozyme variant lacking P5abc (E ΔP5abc). Here, we show that CYT-18 specifically promotes formation of the native group I intron core from this misfolded conformation. Catalytic activity assays demonstrate that CYT-18 shifts the equilibrium of E ΔP5abc toward the native state by at least 35-fold, and binding assays suggest an even larger effect. Thus, similar to P5abc, CYT-18 preferentially recognizes the native core, despite the global similarity of the misfolded core and despite forming crudely similar complexes, as revealed by dimethyl sulfate footprinting. Interestingly, the effects of CYT-18 and P5abc on folding kinetics differ. Whereas P5abc inhibits refolding of the misfolded conformation by forming peripheral contacts that must break during refolding, CYT-18 does not display analogous inhibition, most likely because it relies to a greater extent on direct interactions with the core. Although CYT-18 does not encounter this RNA in vivo, our results suggest that it stabilizes its cognate group I introns relative to analogous misfolded intermediates. By specifically recognizing native structural features, CYT-18 may also interact with earlier folding intermediates to avoid RNA misfolding or to trap native contacts as they form. More generally, our results highlight the ability of a protein cofactor to stabilize a functional RNA structure specifically without incurring associated costs in RNA folding kinetics.

The GANC Tetraloop: A Novel Motif in the Group IIC Intron Structure

Tetraloops are a common building block for RNA tertiary structure, and most tetraloops fall into one of three well-characterized classes: GNRA, UNCG, and CUYG. Here, we present the sequence and structure of a fourth highly conserved class of tetraloop that occurs only within the ζ–ζ′ interaction of group IIC introns. This GANC tetraloop was identified, along with an unusual cognate receptor, in the crystal structure of the group IIC intron and through phylogenetic analysis of intron RNA sequence alignments. Unlike conventional tetraloop–receptor interactions, which are stabilized by extensive hydrogen-bonding interactions, the GANC–receptor interaction is limited to a single base stack between the conserved adenosine of the tetraloop and a single purine of the receptor, which consists of a one- to three-nucleotide bulge and does not contain an A-platform. Unlike GNRA tetraloops, the GANC tetraloop forms a sharp angle relative to the adjacent helix, bending by approximately 45° toward the major groove side of the helix. These structural attributes allow GANC tetraloops to fit precisely within the group IIC intron core, thereby demonstrating that structural motifs can adapt to function in a specific niche.

Three essential and conserved regions of the group II intron are proximal to the 5′-splice site

Despite the central role of group II introns in eukaryotic gene expression and their importance as biophysical and evolutionary model systems, group II intron tertiary structure is not well understood. In order to characterize the architectural organization of intron ai5gamma, we incorporated the photoreactive nucleotides s(4)U and s(6)dG at specific locations within the intron core and monitored the formation of cross-links in folded complexes. The resulting data reveal the locations for many of the most conserved, catalytically important regions of the intron (i.e., the J2/3 linker region, the IC1(i-ii) bulge in domain 1, the bulge of D5, and the 5'-splice site), showing that all of these elements are closely colocalized. In addition, we show by nucleotide analog interference mapping (NAIM) that a specific functional group in J2/3 plays a role in first-step catalysis, which is consistent with its apparent proximity to other first-step components. These results extend our understanding of active-site architecture during the first step of group II intron self-splicing and they provide a structural basis for spliceosomal comparison.

A Kinetic Intermediate that Regulates Proper Folding of a Group II Intron RNA

The D135 group II intron ribozyme follows a unique folding pathway that is direct and appears to be devoid of kinetic traps. During the earliest stages of folding, D135 collapses slowly to a compact intermediate, and all subsequent assembly events are rapid. Collapse of intron domain 1 (D1) has been shown to limit the rate constant for D135 folding, although the specific substructure of the D1 kinetic intermediate has not yet been identified. Employing time-resolved nucleotide analog interference mapping, we have identified a cluster of atoms within the D1 main stem that control the rate constant for D135 collapse. Functional groups within the κ–ζ element are particularly important for this earliest stage of folding, which is intriguing given that this same motif also serves later as the docking site for catalytic domain 5. More important, the κ–ζ element is shown to be a divalent ion binding pocket, indicating that this region is a Mg2+-dependent switch that initiates the cascade of D135 folding events. By measuring the Mg2+ dependence of the compaction rate constant, we conclude that the actual rate-limiting step in D1 compaction involves the formation of an unstable folding intermediate that is captured by the binding of Mg2+. This carefully orchestrated folding pathway, in which formation of an active-site docking region is early and rate limiting, ensures proper folding of the intron core and faithful splicing. It may represent an important paradigm for the folding of large, multidomain RNA molecules.

An allosteric-feedback mechanism for protein-assisted group I intron splicing

The I-AniI maturase facilitates self-splicing of a mitochondrial group I intron in Aspergillus nidulans. Binding occurs in at least two steps: first, a specific but labile encounter complex rapidly forms and then this intermediate is slowly resolved into a native, catalytically active RNA/protein complex. Here we probe the structure of the RNA throughout the assembly pathway. Although inherently unstable, the intron core, when bound by I-AniI, undergoes rapid folding to a near-native state in the encounter complex. The next transition includes the slow destabilization and docking into the core of the peripheral stacked helix that contains the 5' splice site. Mutational analyses confirm that both transitions are important for native complex formation. We propose that protein-driven destabilization and docking of the peripheral stacked helix lead to subtle changes in the I-AniI binding site that facilitate native complex formation. These results support an allosteric-feedback mechanism of RNA-protein recognition in which proteins engaged in an intermediate complex can influence RNA structure far from their binding sites. The linkage of these changes to stable binding ensures that the protein and RNA do not get sequestered in nonfunctional complexes.

A DEAD Protein that Activates Intron Self-Splicing without Unwinding RNA

The group II intron ai5gamma from S. cerevisiae requires high temperature and salt to self-splice in vitro, but it is assisted by the protein Mss116 in vivo. Here we show that Mss116 can stimulate splicing of ai5gamma under near-physiological conditions in vitro, which represents one of the first cases in which a DExH/D protein is shown to act on its natural target. Importantly, we demonstrate that a small subset of DEAD-box proteins can also stimulate ai5gamma splicing in vitro and may represent a distinct subfamily of DEAD-box proteins that functions in RNA tertiary structure assembly. Mutational analysis shows that while ATPase activity is required for stimulation of splicing by Mss116, helicase activity is not. This finding indicates that Mss116 is unlikely to promote intron splicing through the unwinding of kinetic traps. Rather, we propose that Mss116 promotes the ordered assembly of large RNA molecules through stabilization of on-pathway intermediates.

The Receptor for Branch-Site Docking within a Group II Intron Active Site

The distinguishing feature of group II introns, and the property that links them with spliceosomal catalysis, is their ability to undergo splicing through branching. In this reaction, the 2'-hydroxyl group of a specific adenosine within intron domain 6 serves as the nucleophile for attack on the 5' splice site. We know less about branching than any other feature of group II intron catalysis, largely because the receptor structure for activating the branch site is unknown. Here, we identify the intronic region that binds the branch site of a group IIB intron. Located in domain 1, close to receptors for intron domain 5 and both splice sites, we demonstrate that the branch-site receptor is a functional element required for transesterification. Furthermore, we show that crosslinked branch sites can carry out both steps of splicing, suggesting that the conformational state of the intron core is set early and that it persists throughout the entire splicing process.

Long-term evolution of the S788 fungal nuclear small subunit rRNA group I introns.

More than 1000 group I introns have been identified in fungal rDNA. Little is known, however, of the splicing and secondary structure evolution of these ribozymes. Here, we use a combination of comparative and biochemical methods to address the evolution and splicing of a vertically inherited group I intron found at position 788 in the fungal small subunit (S) rRNA. The ancestral state of the S788 intron contains a highly conserved core and an extended P5 domain typical of IC1 introns. In contrast, the more derived introns have lost most of P5, and have an accelerated divergence rate within the core region with three functionally important substitutions that unambiguously separate them from the ancestral pool. Of 14 S788 group I introns that were tested for splicing, five, all of the ancestral type, were able to self-splice and produced intron RNA circles in vitro. The more derived S788 introns did not self-splice, and potentially rely on fungal-specific factors to facilitate splicing. In summary, we demonstrate one possible fate of vertically inherited group I introns, the loss of secondary structure elements, lessened selective constraints in the intron core, and ultimately, dependence on host-mediated splicing.

Domains 2 and 3 Interact to Form Critical Elements of the Group II Intron Active Site

Group II introns are self-splicing RNA molecules that also behave as mobile genetic elements. The secondary structure of group II intron RNAs is typically described as a series of six domains that project from a central wheel. Most structural and mechanistic analyses of the intron have focused on domains 1 and 5, which contain the residues essential for catalysis, and on domain 6, which contains the branch-point adenosine. Domains 2 and 3 (D2, D3) have been shown to make important contributions to intronic activity; however, information about their function is quite limited. To elucidate the role of D2 and D3 in group II ribozyme catalysis, we built a series of multi-piece ribozyme constructs based on the ai5γ group II intron. These constructs are designed to shed light on the roles of D2 and D3 in some of the major reactions catalyzed by the intron: 5′-exon cleavage, branching, and substrate hydrolysis. Reactions with these constructs demonstrate that D3 stimulates the chemical rate constant of group II intron reactions, and that it behaves as a form of catalytic effector. However, D3 is unable to associate independently with the ribozyme core. Docking of D3 is mediated by a short duplex that is found at the base of D2. In addition to recruiting D3 into the core, the D2 stem directs the folding of the adjacent j2/3 linker, which is among the most conserved elements in the group II intron active site. In turn, the D2 stem contributes to 5′-splice site docking and ribozyme conformational change. Nucleotide analog interference mapping suggests an interaction between the D2 stem and D3 that builds on the known θ–θ′ interaction and extends it into D3. These results establish that D3 and the base of D2 are key elements of the group II intron core and they suggest a hierarchy for active-site assembly.

Structural Requirement for Mg 2+ Binding in the Group I Intron Core

Divalent metal ions are required for splicing of group I introns, but their role in maintaining the structure of the active site is still under investigation. Ribonuclease and hydroxyl radical footprinting of a small group I intron from Azoarcus pre-tRNA Ile showed that tertiary interactions between helical domains are stable in a variety of cations. Only Mg 2+, however, induced a conformational change in the intron core that correlates with self-splicing activity. Three metal ion binding sites in the catalytic core were identified by Tb(III)-dependent cleavage. Two of these are near bound substrates in a three-dimensional model of the ribozyme. A third metal ion site is near an A minor motif in P3. In the pre-tRNA, Tb 3+ cleavage was redirected to the 5′ and 3′ splice sites, consistent with metal-dependent activation of splice site phosphodiesters. The results show that many counterions induce global folding, but organization of the group I active site is specifically linked to Mg 2+ binding at a few sites.

RNA chaperone StpA loosens interactions of the tertiary structure in the td group I intron in vivo

Efficient splicing of the td group I intron in vivo is dependent on the ribosome. In the absence of translation, the pre-mRNA is trapped in nonnative-splicing-incompetent conformations. Alternatively, folding of the pre-mRNA can be promoted by the RNA chaperone StpA or by the group I intron-specific splicing factor Cyt-18. To understand the mechanism of action of RNA chaperones, we probed the impact of StpA on the structure of the td intron in vivo. Our data suggest that StpA loosens tertiary interactions. The most prominent structural change was the opening of the base triples, which are involved in the correct orientation of the two major intron core domains. In line with the destabilizing activity of StpA, splicing of mutant introns with a reduced structural stability is sensitive to StpA. In contrast, Cyt-18 strengthens tertiary contacts, thereby rescuing splicing of structurally compromised td mutants in vivo. Our data provide direct evidence for protein-induced conformational changes within catalytic RNA in vivo. Whereas StpA resolves tertiary contacts enabling the RNA to refold, Cyt-18 contributes to the overall compactness of the td intron in vivo.

Visualizing the solvent-inaccessible core of a group II intron ribozyme.

Group II introns are well recognized for their remarkable catalytic capabilities, but little is known about their three-dimensional structures. In order to obtain a global view of an active enzyme, hydroxyl radical cleavage was used to define the solvent accessibility along the backbone of a ribozyme derived from group II intron ai5gamma. These studies show that a highly homogeneous ribozyme population folds into a catalytically compact structure with an extensively internalized catalytic core. In parallel, a model of the intron core was built based on known tertiary contacts. Although constructed independently of the footprinting data, the model implicates the same elements for involvement in the catalytic core of the intron.

Metal ion binding sites in a group II intron core.

Group II introns are catalytic RNA molecules that require divalent metal ions for folding, substrate binding, and chemical catalysis. Metal ion binding sites in the group II core have now been elucidated by monitoring the site-specific RNA hydrolysis patterns of bound ions such as Tb(3+) and Mg(2+). Major sites are localized near active site elements such as domain 5 and its surrounding tertiary interaction partners. Numerous sites are also observed at intron substructures that are involved in binding and potentially activating the splice sites. These results highlight the locations of specific metal ions that are likely to play a role in ribozyme catalysis.