Intrinsic Frequency Research Articles

Contamination in TESS Light Curves: The Case of the Fast Yellow Pulsating Supergiants

Given its large plate scale of 21″ pixel−1, analyses of data from the Transiting Exoplanet Survey Satellite (TESS) space telescope must be wary of source confusion from blended light curves, which creates the potential to attribute observed photometric variability to the wrong astrophysical source. We explore the impact of light curve contamination on the detection of fast yellow pulsating supergiant (FYPS) stars as a case study to demonstrate the importance of confirming the source of detected signals in the TESS pixel data. While some of the FYPS signals have already been attributed to contamination from nearby eclipsing binaries, others are suggested to be intrinsic to the supergiant stars. In this work, we carry out a detailed analysis of the TESS pixel data to fit the source locations of the dominant signals reported for 17 FYPS stars with the Python package TESS_localize. We are able to reproduce the detections of these signals for 14 of these sources, obtaining consistent source locations for four. Three of these originate from contaminants, while the signal reported for BZ Tuc is likely a spurious frequency introduced to the light curve of this 127 day Cepheid by the data processing pipeline. Other signals are not significant enough to be localized with our methods, or have long periods that are difficult to analyze given other TESS systematics. Since no localizable signals hold up as intrinsic pulsation frequencies of the supergiant targets, we argue that unambiguous detection of pulsational variability should be obtained before FYPS are considered a new class of pulsator.

Research on Electromagnetic Vibration Characteristics of a Permanent Magnet Synchronous Motor Based on Multi-Physical Field Coupling

Background and Purpose: The stator vibration characteristics are comprehensively mastered by considering the influence of winding and the housing structure on the stator modes. This effect is neglected in the research field of electromagnetic vibration of permanent magnet synchronous motors (PMSMs). Methods: The radial air-gap flux density equations and PMSM’s electromagnetic force density are derived, and then the harmonic characteristics of electromagnetic force density are studied. An equivalent finite element model of the stator is proposed that investigates the impacts of the winding and stator housing rules on the stator modal frequency. Finally, the harmonic response and acoustic analyses of electromagnetic vibration are carried out based on multi-physics field coupling. Results: The equivalent radiated power distribution laws and acoustic field of motor electromagnetic vibration under transient operating conditions are obtained. The theoretical analysis results are consistent with the experimental results. Conclusion: The obtained results show that the spatial order of the radial electromagnetic force is not equal to the order of the radial mode of the motor stator. The reason for this is that structural resonance is induced when the frequency components of the spatial radial electromagnetic force are coupled with the intrinsic frequency of the stator.

Terahertz Schottky Barrier Diodes Based on Aligned Carbon Nanotube Arrays

Carbon nanotubes (CNTs) with superior electrical characteristics are among the most promising candidate materials for constructing millimeter wave and terahertz wave electronic devices. However, the reported Schottky barrier diodes (SBDs) based on CNTs usually exhibited high series resistance and severe mismatch to lower impedance external circuits, which limits the devices for high frequency applications. In this work, CNT SBDs of lateral structure with a rectify current density of -0.78 mA/μm and a short circuit current responsivity of 6.8 A/W are demonstrated based on aligned carbon nanotube arrays (A-CNTs) with high-density and high-semiconducting purity on a quartz substrate. The A-CNT SBD with a width of 10 μm and an L <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">ch</sub> of 50 nm under zero bias exhibits an ultra-low intrinsic capacitance of 2.5 fF and an intrinsic cutoff frequency <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">f</i> <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">C</sub> of up to 840 GHz, which suggests that CNT-based SBDs are promising for millimeter wave and terahertz wave applications.

Phase Measurement Method Based on Digital Dual Frequency Comb for High-Precision High-Speed Heterodyne Interferometry

The heterodyne interferometer is widely used as a precise displacement sensor in ultraprecision processing. However, there is a trade-off between measurement speed and measurement precision in the existing interference signal processing methods. In this work, a novel phase measurement method based on digital dual frequency comb is proposed. The proposed method uses the intrinsic frequency comb signal and a narrowband low-pass filter to form a band-pass filter bank, which divides the broadband brought by high-speed movement into multiple narrow bands. The signal-to-noise ratio (SNR) is improved for phase calculation. In addition, two groups of intrinsic frequency comb signals are used simultaneously for phase measurement and the rotation of the output, preventing the inaccurate phase measurement of the input signal whose frequency is the average of two frequencies in the frequency comb signal. The heterodyne laser interferometer can maintain high precision at high measurement speed. The simulation results show that the precision of the proposed method is more than 50% higher than that of the phase-locked loop method. The experiment with a circuit board combined with 100 Msps sampling 16-bit A/D converter shows that the phase measurement precision of the input signal frequency in the bandwidth range of 2.5–37.5 MHz can reach 0.77 mrad, equivalent to the displacement measurement precision of the double-pass interferometer (19 pm) at a measurement speed of less than 2.77 m/s.

Design of a mechanical automatic transmission system for automobiles based on torsional vibration damping

Abstract In order to reduce the vibration damage of the engine and improve the automatic transmission adjustment performance of the automobile, an automatic transmission system based on torsional damping is constructed in this paper to optimize the hardware function of the shift speed. The torsional damper is used as the core control element to reciprocate the automotive mechanical automatic transmission system, and the calculation method of torsional vibration analysis of the crankshaft shaft system is used to determine the indexes of rotational inertia, stiffness, and damping parameters of torsional vibration. The damping coefficient values are set near the equilibrium point, and the loss factor of the automatic transmission system is signal processed to obtain the best damping effect. Using the intrinsic frequency as the central processing unit of the automatic transmission system, the differential equation is used to calculate the excitation torque vector of each cylinder of the engine, and the characteristic module of the automatic transmission system is developed. The tests showed that the cylinder burst pressure of the automatic transmission system with the torsional damper reached a maximum of 67.9 pressure at 4800 amp. The crankshaft front-end torsional angle of the 4th-order main harmonic excitation reached a maximum of 0.57 degrees, which exceeded the engineering allowance of 0.2 degrees and reduced the automatic shift shock by about 28.36%. It indicates that the torsional damper can improve the control performance of the automatic transmission system, which is conducive to enhancing the stability and self-adaptive capability of the transmission adjustment.

Two-qubit-Heisenberg local quantum Fisher information dynamics induced by intrinsic decoherence model

This study explores the dynamics of the formation of quantum correlations, namely: local quantum Fisher information and concurrence in a two-spin Heisenberg XXX system. The x-direction of Kaplan–Shekhtman–Entin–Wohlman–Aharony (KSEA) and Dzyaloshinskii–Moriya (DM) interactions as well as the intrinsic decoherence are considered. We show that the interactions are responsible of transforming separable states to correlated states. We point out that by strengthening the two-spin antiferromagnetic interaction coupling, it is possible to increase the capacity to develop semi-regularly maximal two-spin correlations. By increasing the DM and KSEA x-components, the two-spin XXX–Heisenberg exalts maximal local Fisher information and concurrence correlations with large amplitudes and high frequencies. As the intrinsic decoherence increases, the amplitudes and frequencies of the correlations decrease, which also causes the phenomena of sudden death–birth and sudden changes of the correlations. The two-spin correlation produced by the unitary x-component interactions can be shielded from the intrinsic decoherence by increasing the two-spin antiferromagnetic interaction coupling.

Self-tuning vibration reduction study of magnetic fluid rolling-ball damper based on PSO-FUZZY-PID

For towering structures under complex time-varying excitation, the tuned magnetic fluid rolling-ball dampers (TMFRBD) cannot achieve self-tuning damping. In this paper, considering the operating characteristics of the TMFRBD, a damper self-tuning control algorithm, namely particle swarm optimization (PSO)-FUZZY-PID, is proposed for real-time adjustment of the intrinsic frequency of TMFRBD, which can greatly improve the damping effect, namely self-tuning magnetic fluid rolling-ball dampers (STMFRBD). Firstly, the equivalent dynamics model of the damping system is established, deriving the structural dynamic amplitude response as a function of the excitation frequency to structural frequency ratio. Different frequency tracking schemes of the damper are compared and analyzed. Then magnetic field simulations and magnetic fluid magnetic property measurements are performed for the dampers, respectively. Secondly, the self-tuning PSO-FUZZY-PID control algorithm is designed to improve the damping performance of STMFRBD under time-varying excitation by optimizing factors of the FUZZY-PID controller with PSO. To confirm the effectiveness of the damper self-tuning control algorithm, the frequency tracking of dampers with different control algorithms under time-varying excitation is compared. The results show that the damper’s frequency can be tuned quickly and accurately tracking excitation frequency by PSO-FUZZY-PID. Finally, the simulation and experimental results of STMFRBD and passive mass damper (PMD) under different loads are analyzed, and the structural amplitude response is analyzed using the Hilbert-Huang transform (HHT). In addition, the damping of STMFBD and TMFBD under different loads is compared. The results show that STMFRBD has better vibration-damping performance than PMD and TMFRBD.

ИССЛЕДОВАНИЕ ПАРАМЕТРОВ ИЗГИБНЫХ КОЛЕБАНИЙ И АНАЛИЗ МЕТОДОВ ИХ ПОДАВЛЕНИЯ В КУЗОВАХ СОВРЕМЕННЫХ ПАССАЖИРСКИХ ВАГОНОВ

The issues of increasing the passenger comfort level during railway transportation are considered. It is found out that the key factors for the comfort level are vertical vibrations of the body, and their intensity directly depends on the body bending stiffness. In turn, the first frequency and form of bending vibrations of the body can be taken as a criterion for evaluating bending stiffness. Design concepts aimed at increasing the comfort level of passengers and reducing the intensity of vibrations of car bodies are considered. Methods are analyzed that give the opportunity to increase the intrinsic frequency of the body bending vibrations by strengthening the metal structure of the body and making changes to the structure of its power frame, as well as by introducing specific inter-car connections. Methods of vibration isolation of the car bodies are reviewed by controlling damping in the car suspension system, as well as by reducing vibrations associated with the imbalance of wheel pairs. The experience of increasing the level of the com-fort due to the introduction of additional damping and the use of dynamic vibration damping systems has been studied. Advantages and disadvantages of the considered technical solutions are identified, as well as the experience of their use in real operation is evaluated. The analysis of the problem under consideration concerning engineering solutions for reducing bending vibrations of passenger car bodies shows the complexity of solving this problem, requiring the use of a set of theoretical and experimental studies, the choice of methods that take into account the features of the car designs and sources of vibration stimulation.

Research on the performance of a valveless piezoelectric pump with a herringbone bluffbody

Aiming to improve the output performance of a valveless piezoelectric pump, this article presents a valveless piezoelectric pump with a herringbone bluffbody. The bluffbody is herringbone shaped and distributed in a tapered chamber. The tapered chamber and the bluffbody create a large reverse resistance in the chamber, thus effectively mitigating the backflow problem of the valveless pump. The theoretical analysis determined the relationship between the flow rate and the flow resistance coefficient as well as the variation of the pump chamber volume. It was also concluded that the piezoelectric pump has the best output flow at intrinsic frequencies. Through simulation calculations, the effectiveness of the bluffbody structure in mitigating backflow in piezoelectric pumps is analyzed to provide a reference for experimental prototype design parameters. Finally, a range of prototypes is produced for experimentation. The experimental results show that the designed bluffbody shape can increase the return energy loss to effectively mitigate the return flow issues of the valveless piezoelectric pump, thus improving the output performance. The optimum output flow rate is 158.5 ml/min at 200 V and 52.5 Hz and the tapered chamber angle of 6°, and the bluffbody height, angle, and quantities are 2 mm, 40°, and 2, respectively. The construction of the valveless piezoelectric pump proposed in this research can be used as a reference for subsequent improvements in the performance of valveless piezoelectric pumps, and due to the high output performance, experimental studies can be carried out in applications such as dispensing and heat dissipation in electronic products.

The Relationship between Horizontal and Vertical Velocity Wavenumber Spectra in Global Storm-Resolving Simulations

Abstract Several studies have reported vertical kinetic energy spectra almost white in horizontal wavenumber space with evidence of two maxima at synoptic scales and mesoscales, leaving the explanation of these maxima open. Processes known to influence the shape of the horizontal kinetic energy spectra include the superposition of quasi-linear inertia–gravity waves (IGWs), quasigeostrophic turbulence, and moist convection. In contrast, vertical kinetic energy has been discussed much less, as measuring vertical velocity remains challenging. This study compares the horizontal and vertical kinetic energy spectra and their relationships in global storm-resolving simulations from the DYAMOND experiment. The consistency of these relationships with linear IGW theory is tested by diagnosing horizontal wind fluctuations associated with IGW modes. Furthermore, it is shown that hydrostatic IGW polarization relations provide a quantitative prediction of the spectral slopes of vertical kinetic energy at large scales and mesoscales, where the intrinsic frequencies are inferred from the linearized vorticity equation. Our results suggest that IGW modes dominate the vertical kinetic energy spectra at most horizontal scales, whereas an incompressible, isotropic scaling of the continuity equation captures the relationship between horizontal and vertical kinetic energy spectra at small scales.

Automatic wheeze segmentation using harmonic-percussive source separation and empirical mode decomposition.

Wheezes are adventitious respiratory sounds commonly present in patients with respiratory conditions. The presence of wheezes and their time location are relevant for clinical reasons, such as understanding the degree of bronchial obstruction. Conventional auscultation is usually employed to analyze wheezes, but remote monitoring has become a pressing need during recent years. Automatic respiratory sound analysis is required to reliably perform remote auscultation. In this work we propose a method for wheeze segmentation. Our method starts by decomposing a given audio excerpt into intrinsic mode frequencies using empirical mode decomposition. Then, we apply harmonic-percussive source separation to the resulting audio tracks and get harmonic-enhanced spectrograms, which are processed to obtain harmonic masks. Subsequently, a series of empirically derived rules are applied to find wheeze candidates. Finally, the candidates stemming from the different audio tracks are merged and median filtered. In the evaluation stage, we compare our method to three baselines on the ICBHI 2017 Respiratory Sound Database, a challenging dataset containing various noise sources and background sounds. Using the full dataset, our method outperforms the baselines, achieving an F1 of 41.9%. Our method's performance is also better than the baselines across several stratified results focusing on five variables: recording equipment, age, sex, body-mass index, and diagnosis. We conclude that, contrary to what has been reported in the literature, wheeze segmentation has not been solved for real life scenario applications. Adaptation of existing systems to demographic characteristics might be a promising step in the direction of algorithm personalization, which would make automatic wheeze segmentation methods clinically viable.

The drillstring dynamic frequency domains modes and mode shapes characteristics of compound drilling for the high-quality slim borehole

High-quality borehole is crucial to hydrogen underground storage (HUS) and oil & gas development, while compound drilling plays an important role in improving borehole quality. The modal model of compound drillstring in slim borehole is established by using finite element method to analyze the modal of longitudinal vibration, lateral vibration and torsional vibration. The results shows that as the number of order increases, the intrinsic frequency of the three vibrations increases. The amplitude of axial vibration is the largest, and the amplitude of lateral vibration is smallest. The natural frequency of drillstring in slim borehole decreases as drillstring length increasing. The longer drillstring is, the smaller the interval frequency between the intrinsic frequencies of orders will be, and it is easier to cause resonance. The axial vibration will cause minimal damage to the HUS quality. Lateral vibration has the greatest damage to wellbore quality, and is the most unfavorable for the establishment of HUS channels. The damage of torsional vibration to the HUS is less than the lateral vibration and larger than axial vibration. The higher the vibration frequency and amplitude, the harder it is to improve the HUS quality. In order to improve the quality of HUS, the weight on bit (WOB) and rotary per minutes (RPM) should be adjusted at the same time for lateral shock, and the WOB should be mainly reduced for controlling the axial and torsional vibration. The results are benefit for the drillstring design, improving the wellbore quality and HUS quality.

Oil–water two-phase flow-induced vibration of a cylindrical cyclone with vortex finder

Cylindrical cyclones play an important role in oil–water separation and sewage treatment in the petroleum industry. Here, we describe the characteristics of vibration induced by a two-phase rotational flow in a cylindrical cyclone. The cyclone operating parameters together with a dimensional analysis and multiphase flow numerical simulation were used to understand the flow field characteristics. The frequency and amplitude of pressure fluctuation were obtained by measuring pressure changes at points on the axis of the device. It shows that the pressure in a cylindrical cyclone varies periodically during separation and that fluctuation frequency and amplitude are related to the inlet velocity and flow split ratio. The effect of the overflow split ratio on the pressure fluctuation frequency is negligible, but increasing the overflow split ratio will cause greater fluctuation of the flow. For a cylindrical cyclone, the pressure fluctuation frequency can be calculated from the inlet velocity. Adjusting the inlet velocity and the overflow split ratio changes the mechanical response of the structure. The results of a modal analysis show that the structural vibration response is consistent with the response state of the lowest point of the internal central-vortex pressure and that both are in approximate circular motion. Furthermore, the frequency of pressure fluctuation induced by the flow is close to the intrinsic frequency of the structure with a single bottom constraint, which can cause unwanted resonance easily. Therefore, an appropriately added constraint on a cylindrical cyclone should be taken into consideration to avoid the resonance frequency.

Simplified calculation method for hydrodynamic noise of multi-tube heat exchanger based on acoustic cavity model

Because of the complex structure of the heat exchanger, its hydrodynamic noise simulation is difficult and the problem of low computational efficiency can not be solved well. An acoustically simplified calculation method for a large shell and tube heat exchanger with 2000 heat transfer tubes is proposed for a multi-tube number heat exchanger. The heat exchanger tubes are equated to different numbers of heat exchanger tubes according to their through-flow areas of 2000 heat exchanger tubes. Based on the LMS Virtual.Lab acoustic finite element module, acoustic cavity model calculations and analysis are performed for heat exchangers with different numbers of heat transfer tubes. From the acoustic cavity model laws of heat exchangers with 20, 100, 500 and 1000 tubes, it can be found that the distribution of vibration patterns and the intrinsic frequencies of heat exchangers with different tube numbers are similar. Therefore, the calculation model of 20 heat exchanger tubes is selected for noise calculation based on the fluid calculation software ANSYS-CFX and the acoustic calculation software ACTRAN. Based on the results of the noise calculation and the comparison verification of the experimental data, it is concluded that the heat exchanger models with similar acoustic cavity model have similar sound pressure levels. In addition, the sound transmission loss law and the contribution of the acoustic cavity model of the shell and tube heat exchanger are analyzed. Therefore, the effectiveness of the simplified calculation method of multi-tube number heat exchanger proposed is verified. The proposed simplified calculation method can be used to reduce the calculation difficulty and improve the calculation efficiency of complex heat exchangers.

Magnetic-Solid Coupling Nonlinear Vibration of an Axially Moving Thin Plate Under Air-Gap Magnetic Field

The nonlinear inherent vibration of an axially moving ferromagnetic thin plate under the action of the armature air-gap magnetic field is investigated. Based on the nonlinear elasticity theory, the energy relationship equations of the thin plate are given. Based on the electromagnetic theory and the solution of Laplace’s magnetic potential equation, magnetic force on the ferromagnetic rectangular plate under air-gap magnetic field environment is deduced. The Hamilton variational principle is applied to derive the magneto-solid coupled nonlinear vibration equation of the axially moving ferromagnetic thin plate. The two-degree-of-freedom nonlinear vibration differential equations containing static load terms with boundary conditions of SSSS and SSCC are obtained by discretizing through the Galerkin method. The multi-scale method is applied to solve the second-order approximation for deriving the first two orders’ intrinsic frequency of the nonlinear system. The variation laws of first two orders’ nonlinear inherent vibration with axial velocity, magnetic potential, initial air-gap thickness, and initial value are given through numerical examples, and the comparative analysis is performed. The results show that the first-order and second-order inherent vibration frequencies decrease with the increase of axial velocity and magnetic potential and increase with the increase of initial air-gap magnetic field thickness. Different materials and different boundary conditions have greater influence on the first-order and second-order inherent frequencies, and show obvious nonlinear characteristics. The results can provide references for analyzing and controlling the vibration behavior of moving structures in electromagnetic environment.

Phosphorus Optimized Metastable Hexagonal‐Close‐Packed Phase Nickel for Efficient Hydrogen Peroxide Production in Neutral Media

AbstractDirect synthesis of hydrogen peroxide (H2O2) through electrochemical oxygen reduction has gained close attention yet remains a great challenge due to the slow kinetics. Herein, combining with the virtues of the native high energy state and fascinating surface environment of metastable materials and doping strategy, an efficient phosphorus‐optimized metastable hexagonal‐close‐packed phase nickel catalyst (P‐hcp Ni), belonging to the space group (P63/mmc, 194), with P doping is demonstrated. Significantly, it achieves high selectivity of 97% and a high intrinsic turnover frequency of 2.34 s−1, much better than those of the stable face‐centered‐cubic Ni catalyst. It also displays high stability with remaining in the metastable phase after the stability test. More importantly, P‐hcp Ni also achieves a productivity of 4917.2 mmol gNi−1 h−1 and an accumulated concentration of (H2O2) of 2.38 mol L−1 after 130 h stability test in pure water with a solid electrolyte. Further investigation reveals that the P doping not only greatly enhances the stability of metastable phase, but also weakens the *OOH adsorption on the active site, promoting the high production of H2O2 in the neutral media.

Effect of Unbalanced Magnetic Pull of Generator Rotor on the Dynamic Characteristics of a Pump—Turbine Rotor System

In pumped storage units, the rotor-bearing electromagnetic system is under the joint influence of hydraulics, mechanics, and electromagnetics, and the mechanism of unit vibration problems is very complex to investigate. ANSYS software is used to establish a three-dimensional model of a pumped storage power plant’s rotor-bearing electromagnetic system, and the stiffness coefficient of the unbalanced magnetic traction forces is calculated using the Fourier series of the magnetic conductivity of the air gap. This shows that the nonequilibrium magnetic attraction increases non-linearly with increasing excitation current and eccentricity of the rotor. At each order, the critical velocity of the rotor system increases as the stiffness factor of the bearing increases, with the greatest increase in critical velocity at the third and fourth orders. In the first-order mode-oscillation pattern, the unbalanced magnetic attraction has an effect on the intrinsic frequency of the transverse oscillation, with a reduction in the amplitude of the intrinsic frequency by 34.65%. Axial and transverse modal vibrations manifest themselves as upward and downward motions and transverse oscillations in different portions of the rotor system, respectively, whereas torsional modal vibrations manifest as a radial broadening or reduction in the generator rotor, runner, and coupling portions of the rotor system. The results of the study provide a theoretical foundation and a computational method for the dynamic analysis and design of the rotor system of pumped storage power stations.

Simultaneous Dual-Band Hyperspectral Stimulated Raman Scattering Microscopy with Femtosecond Optical Parametric Oscillators.

Stimulated Raman scattering (SRS) microscopy is a label-free quantitative optical technique for imaging molecular distributions in cells and tissues by probing their intrinsic vibrational frequencies. Despite its usefulness, existing SRS imaging techniques have limited spectral coverage due to either a wavelength tuning constraint or narrow spectral bandwidth. High-wavenumber SRS imaging is commonly used to map lipid and protein distribution in biological cells and visualize cell morphology. However, to detect small molecules or Raman tags, imaging in the fingerprint region or "silent" region, respectively, is often required. For many applications, it is desirable to collect SRS images in two Raman spectral regions simultaneously for visualizing the distribution of specific molecules in cellular compartments or providing accurate ratiometric analysis. In this work, we present an SRS microscopy system using three beams generated by a femtosecond oscillator to acquire hyperspectral SRS image stacks in two arbitrary vibrational frequency bands, between 650-3280 cm-1, simultaneously. We demonstrate potential biomedical applications of the system in investigating fatty acid metabolism, cellular drug uptake and accumulation, and lipid unsaturation level in tissues. We also show that the dual-band hyperspectral SRS imaging system can be adapted for the broadband fingerprint region hyperspectral imaging (1100-1800 cm-1) by simply adding a modulator.

Graphene passivation effect on copper cavity resonator preserves Q-factor

Proposed resonator design and measurement technique is a promising solution to estimate the value of materials surface conductivity. In the developed device, there are no mechanical connections, that interrupt the flowing microwave currents, which eliminates losses due to poor metal contact and related measurement errors. The main losses (60%) in the resonator are concentrated in a small sample under study - resonance element sample, which ensures high sensitivity to changes in surface conductivity. The influence of annealing the copper cavity resonator surface conducting microwave currents, as well as the effect of graphene coating on its intrinsic quality factor and frequency, was experimentally studied. Technological procedures for modifying a copper surface such as annealing in an H2/Ar atmosphere at a temperature of 1070 °C and subsequent coating with graphene by chemical vapor deposition method are studied. The modification of copper resonator surface texture during heat treatment in hydrogen and argon atmospheres has been studied. It is shown that during annealing, the resonator quality factor increases. The increase of the quality factor was associated with a decrease of resistance of copper, with the growth of crystalline grains, this effect disappears when the resonator is exposed to an air atmosphere. It was found that the graphene coating does not make a significant contribution to the change in the quality factor, but prevents the active growth of the oxide layer and prevents impurities deposition on the copper surface from the atmosphere. Thus, after annealing in hydrogen atmosphere and subsequent coating with graphene, the increased quality factor is retained. The considered procedures can be used to increase and stabilize the resonators quality factor, to eliminate oxidation and contamination of their surface. The results of this work can be used in the designing of microwave devices to study the thin films surface impedance.

Valley transport via dual-band elastic topological edge states in local-resonant phononic crystal plate

Most previously reported Dirac valley degeneracies in continuous phononic crystal plates originate from Bragg scattering of the structures and generally have only single-band elastic-wave topological edge states. In the present work, a pair of triangular prisms is used in the construction of hexagonal-lattice phononic crystal plates to mimic the dual-band elastic valley Hall effect. Based on the spatial inversion symmetry conditions, which are related to the intrinsic frequencies of the resonators, the valley degeneracies, topological nontrivial bandgaps, and energy band inversion characteristics of multiple resonance modes are investigated by using the finite element method. Edge passbands combining distinct topology phases exist in each of the two nontrivial bandgaps of the ribbon configuration. The full-field simulations for flexural waves in the waveguide structure are demonstrated to support topologically valley-protected edge transmission in both bands, which immunizes the transport against backscattering from large corners and defects in the route. This work provides a reference for valley edge protection in subwavelength continuous elastic plate media and for the manipulation of the elastic waves at multiple frequencies.