Intriguing Class Of Materials Research Articles

Exploring odd-even sensitivity in m.OnO.m liquid crystal compounds: A comprehensive study using DFT analysis

In this article, a comprehensive investigation into a series of liquid crystalline compounds belonging to the α,ω-bis(4-alkylanilinebenzylidene-4′-oxy)alkane (m.OnO.m) family has been conducted to unravel their intricate molecular characteristics. The computational investigations employing DFT/B3LYP/6-311G(d,p) level delve into the odd–even effect, exploring how the presence of spacer units influences the structural, electronic, and vibrational properties of these compounds. Optimization analyses reveal the minimum energy configurations, offering valuable insights into spatial arrangements and symmetry. Visualization of molecular structures emphasizes a distinctive odd–even effect, with compounds exhibiting either U-shaped or Z-shaped configurations based on the parity of spacer units. Charge distribution maps further elucidate electronic intricacies, showcasing the interplay of charges among different atoms. Thermodynamic properties and frontier orbital analysis providing a nuanced understanding of the compounds behavior. NLO parameters exhibited a consistent odd–even effect. Potential Energy Distribution (PED), IR, and Raman spectra analysis, provided a detailed symphony of stretching, bending, and torsional motions. UV–Vis absorption spectra uncover distinctive electronic transitions within each compound. In essence, this research sheds light on the profound impact of spacer units, shaping the structural, electronic, and vibrational characteristics of the liquid crystalline compounds. The odd–even effect emerges as a central theme, weaving a captivating narrative of molecular dynamics within this intriguing class of materials.

Polystyrene carbon composite foam with enhanced insulation and fire retardancy for a sustainable future: Critical review

Polystyrene (PS) composite foams are an intriguing class of materials that are well established for thermal insulation in construction and lightweight recyclable components in automotives. Research has shown the remarkable properties of these foams in terms of thermal and sound insulation and fire retardancy that can be enhanced by incorporating carbon fillers such as graphite, graphene, and biochar. Several methods have been examined by researchers to mix carbon with the polystyrene matrix and prepare PS carbon composite foams, which can broadly be categorized into suspension polymerization, solution mixing and melt blending. These methodologies along with foaming techniques for the expansion of PS using various blowing agents are reviewed. We also review the most relevant research studies in the field of PS carbon composite foams for insulation (thermal and sound) and fire retardancy. Due to its high infrared radiation absorption capacity and hetero nucleating action, expandable graphite and graphene can lead to excellent thermal and sound insulation along with fire retardancy in a PS foam, thus resulting in significant energy savings in a building. Biochar, due to its inherent low thermal conductivity and nucleating action, modifies the foam morphology, leading to enhanced heat and sound absorption and thus is a low-cost renewable carbon alternative that promotes the circular economy.

DFT based Investigation of Structural, Thermodynamic, Mechanical and Electronic Properties of RuVZ (Z: As, Bi, Sb) Half-Heusler Semiconductors

Half-Heusler (hH) alloys are an intriguing class of materials with significant potential for applications in spintronics, thermoelectrics, optoelectronics, and magnetoelectronics due to their unique adjustable properties. In this work, we have investigated the structural, thermodynamic, mechanical, and electronic properties of RuVZ (Z: As, Bi, Sb) half-Heusler materials using the density functional theory (DFT) as implemented in the quantum espresso computational suite. The structural, thermodynamic, and mechanical properties were also predicted using the linear response density functional perturbation theory. We observed that the hH alloys are non-magnetic semiconductors and have an indirect narrow band gap. The band gap values and lattice constants for RuVSb and RuVAs cubic crystals are consistent with published reports. RuVBi has a lattice constant of 6.18 and a band gap of 0.16 eV. The elastic parameter results obtained satisfy Born's stability requirements, suggesting mechanical stability of the hH materials. All three alloys are found to be ductile. The RuVZ alloys obey the Dulong-Petit law at heat capacity of 74.7, 74.5, and 74.3 J mol-1K-1 and temperatures of 556, 754, and 775 K, respectively. The Debye temperature of 353.75K suggests that the RuVAs alloy is the hardest, with a significant Debye sound velocity (2997.12 m/s) and will have high thermal conductivity.

Modulating the dynamics of Brønsted acid sites on PtWOx inverse catalyst

Brønsted acid sites on the oxide overlayers of metal–metal oxide inverse catalysts are often hypothesized to drive selective C–O bond activation. However, the Brønsted acid site nature and dynamics under working conditions remain poorly understood due to the functionalities of the constituent materials. Here we investigate the formation and the dynamics of Brønsted acid and redox sites on PtWOx/C under working conditions. Density functional theory-based thermodynamic calculations and microkinetic modelling reveal a complex interplay between Brønsted acid and redox sites and potentially fast catalyst dynamics at comparable timescales to the Brønsted acid catalysed dehydration chemistry. Combining in situ characterization and probe chemistry, we demonstrate that the density of Brønsted acid sites on the PtWOx/C inverse catalyst could be modulated by up to two orders of magnitude by altering the reaction parameters and by the chemistry itself. We elicit an order of magnitude increase in the acid-catalysed dehydration average reaction rate by periodic hydrogen pulsing. Metal–metal oxide inverse catalysts are an intriguing class of materials, although the understanding of their structure–activity properties remains elusive. Here, Vlachos and colleagues unravel the complex dynamic interplay between Brønsted acid and redox sites at the surface of a PtWOx/C inverse catalyst, offering a strategy to tune its acid-catalysed dehydration reactivity.

Ion Dynamics and Polymorphism in Cu20Te11Cl3.

Coinage metal polychalcogenide halides are an intriguing class of materials, and many representatives are solid ion conductors and thermoelectric materials. The materials show high ion mobility, polymorphism, and various attractive interactions in the cation and anion substructures. Especially the latter feature leads to complex electronic structures and the occurrence of charge-density waves (CDWs) and, as a result, the first p-n-p switching materials. During our systematic investigations for new p-n-n switching materials in the Cu-Te-Cl phase diagram, we were able to isolate polymorphic Cu20Te11Cl3, which we characterized structurally and with regard to its electronic and thermoelectric properties. Cu20Te11Cl3 is trimorphic, with phase transitions occurring at 288 and 450 K. The crystal structures of two polymorphs, the α phase, stable above 450 K, and the β polymorph (288-450 K), are reported, and the complex structure chemistry featuring twinning upon a phase change is illustrated. We identified a dynamic cation substructure and a static anion substructure for all polymorphs, characterizing Cu20Te11Cl3 as a solid Cu-ion conductor. Temperature-dependent measurements of the Seebeck coefficient and total conductivity were performed and substantiated a linear response of the Seebeck coefficient, a lack of CDWs, and no p-n-p switching. Reasons for a lack of CDWs in Cu20Te11Cl3 are discussed and illustrated in the context of existing p-n-p switching materials.

Hydrogel Formation with Enzyme-Responsive Cyclic Peptides.

Self-assembling peptides (SAPs), which form hydrogels through physical cross-linking of soluble structures, are an intriguing class of materials that have been applied as tissue engineering scaffolds and drug delivery vehicles. For feasible application of these tissue mimetics via minimally invasive delivery, their bulk mechanical properties must be compatible with current delivery strategies. However, injectable SAPs which possess shear-thinning capacity, as well as the ability to reassemble after cessation of shearing can be technically challenging to generate. Many SAPs either clog the high-gauge needle/catheter at high concentration during delivery or are incapable of reassembly following delivery. In this chapter, we provide a detailed protocol for topological control of enzyme-responsive peptide-based hydrogels that enable the user to access both advantages. These materials are formulated as sterically constrained cyclic peptide progelators to temporarily disrupt self-assembly during injection-based delivery, which avoids issues with clogging of needles and catheters as well as nearby vasculature. Proteolytic cleavage by enzymes produced at the target tissue induces progelator linearization and hydrogelation. The scope of this approach is demonstrated by their ability to flow through a catheter without clogging and activated gelation upon exposure to target enzymes.

Martensitic Transformation in Fe_{x}Mn_{80-x}Co_{10}Cr_{10} High-Entropy Alloy.

High-entropy alloys and even medium-entropy alloys are an intriguing class of materials in that structure and property relations can be controlled via alloying and chemical disorder over wide ranges in the composition space. Employing density-functional theory combined with the coherent-potential approximation to average over all chemical configurations, we tune free energies between face-centered-cubic and hexagonal-close-packed phases in Fe_{x}Mn_{80-x}Co_{10}Cr_{10} systems. Within Fe-Mn-based alloys, we show that the martensitic transformation and chemical short-range order directly correlate with the face-centered-cubic and hexagonal-close-packed energy difference and stacking-fault energies, which are in quantitative agreement with recent observation of two phase region (face-centered cubic and hexagonal closed pack) in a polycrystalline high-entropy alloy sample at x=40 at.%. Our predictions are further confirmed by single-crystal measurements on a x=40 at.% using transmission-electron microscopy, selective-area diffraction, and electron-backscattered-diffraction mapping. The results herein offer an understanding of transformation-induced or twinning-induced plasticity in this class of high-entropy alloys and a design guide for controlling the physics at the electronic level.

High electrical conductivity in the epitaxial polar metals LaAuGe and LaPtSb

Polar metals are an intriguing class of materials that simultaneously host free carriers and polar structural distortions. Despite the name “polar metal,” however, most well-studied polar metals are poor electrical conductors. Here, we demonstrate the molecular beam epitaxial growth of LaPtSb and LaAuGe, two polar metal compounds whose electrical resistivity is an order of magnitude lower than the well studied oxide polar metals. These materials belong to a broad family of ABC intermetallics adopting the stuffed wurtzite structure, also known as hexagonal Heusler compounds. Scanning transmission electron microscopy reveals a polar structure with unidirectionally buckled BC (PtSb and AuGe) planes. Magnetotransport measurements demonstrate good metallic behavior with low residual resistivity (ρLaAuGe = 59.05 μΩ cm and ρLaAPtSb = 27.81 μΩ cm at 2 K) and high carrier density (nh ∼ 1021 cm−3). Photoemission spectroscopy measurements confirm the band metallicity and are in quantitative agreement with density functional theory (DFT) calculations. Through DFT-chemical pressure and crystal orbital Hamilton population analyses, the atomic packing factor is found to support the polar buckling of the structure although the degree of direct interlayer B–C bonding is limited by repulsion at the A–C contacts. When combined with predicted ferroelectric hexagonal Heuslers, these materials provide a new platform for fully epitaxial, multiferroic heterostructures.

Structure-dependent electrical properties of graphene nanoribbon devices with graphene electrodes

Graphene nanoribbons (GNRs) are a novel and intriguing class of materials in the field of nanoelectronics, since their properties, solely defined by their width and edge type, are controllable with high precision directly from synthesis. Here we study the correlation between the GNR structure and the corresponding device electrical properties. We investigated a series of field effect devices consisting of a film of armchair GNRs with different structures (namely width and/or length) as the transistor channel, contacted with narrowly spaced graphene sheets as the source-drain electrodes. By analyzing several tens of junctions for each individual GNR type, we observe that the values of the output current display a width-dependent behavior, indicating electronic bandgaps in good agreement with the predicted theoretical values. These results provide insights into the link between the ribbon structure and the device properties, which are fundamental for the development of GNR-based electronics.

Synthetic Approaches for Halide Perovskite Thin Films.

Halide perovskites are an intriguing class of materials that have recently attracted considerable attention for use as the active layer in thin film optoelectronic devices, including thin-film transistors, light-emitting devices, and solar cells. The "soft" nature of these materials, as characterized by their low formation energy and Young's modulus, and high thermal expansion coefficients, not only enables thin films to be fabricated via low-temperature deposition methods but also presents rich opportunities for manipulating film formation. This comprehensive review explores how the unique chemistry of these materials can be exploited to tailor film growth processes and highlights the connections between processing methods and the resulting film characteristics. The discussion focuses principally on methylammonium lead iodide (CH3NH3PbI3 or MAPbI3), which serves as a useful and well-studied model system for examining the unique attributes of halide perovskites, but various other important members of this family are also considered. The resulting film properties are discussed in the context of the characteristics necessary for achieving high-performance optoelectronic devices and accurate measurement of physical properties.

Chloride in Lead Chloride-Derived Organo-Metal Halides for Perovskite-Absorber Solar Cells

Organo-metal halide perovskites are an intriguing class of materials that have recently been explored for their potential in solar energy conversion. Within a very short period of intensive research, highly efficient solar cell devices have been demonstrated. One of the heavily debated questions in this new field of research concerns the role of chlorine in solution-processed samples utilizing lead chloride and 3 equiv of methylammonium iodide to prepare the perovskite samples. We utilized a combination of X-ray photoelectron spectroscopy, X-ray fluorescence, and X-ray diffraction to probe the amount of chlorine in samples before and during annealing. As-deposited samples, before annealing, consist of a crystalline precursor phase containing excess methylammonium and halide. We used in situ techniques to study the crystallization of MAPbI3 from this crystalline precursor phase. Excess methylammonium and chloride evaporate during annealing, forming highly crystalline MAPbI3. However, even after prolonged annealing times, chlorine can be detected in the films in X-ray fluorescence measurements.

The electronic structure of organic–inorganic hybrid compounds: (NH4)2CuCl4, (CH3NH3)2CuCl4 and (C2H5NH3)2CuCl4

Hybrid organic–inorganic compounds are an intriguing class of materials that have been experimentally studied over the past few years because of a potential broad range of applications. The electronic and magnetic properties of three organic–inorganic hybrid compounds with compositions (NH4)2CuCl4, (CH3NH3)2CuCl4 and (C2H5NH3)2CuCl4 are investigated for the first time with density functional theory plus on-site Coulomb interaction. A strong Coulomb interaction on the copper causes a relatively weak exchange coupling within the layers of the octahedral network, in good agreement with experiment. The character of the exchange interaction (responsible for magnetic behavior) is analyzed. The calculations reveal that (C2H5NH3)2CuCl4 has the strongest Jahn–Teller (JT) distortion in comparison with the two other compounds. The easy axis of magnetization is investigated, showing a weak anisotropic interaction between inter-layer Cu2+ ions in the (C2H5NH3)2CuCl4 structure. Orbital ordering is concluded from our partial density of states calculations: a cooperation of the JT distortion with an antiferro-distortive pattern.

Polymer nanocomposite foams

Polymer nanocomposite foams, polymer foams with nanoparticles, are an intriguing class of materials with unique structure and properties. The shape, size and surface chemistry of nanoparticles can be tailored to control the foam structure, and therefore, foam properties. Nanoparticles also add functionality to polymer foams. In this paper, we briefly review the recent developments in polymer nanocomposites and nanocomposite foams. This is followed by an extensive discussion regarding the role of nanoparticles in foam morphology and properties. Finally, the current and future trends of polymer nanocomposite foams are summarized. Both challenges and opportunities in this field are discussed.

Topological insulator nanostructures for near-infrared transparent flexible electrodes

Topological insulators are an intriguing class of materials with an insulating bulk state and gapless Dirac-type edge/surface states. Recent theoretical work predicts that few-layer topological insulators are promising candidates for broadband and high-performance optoelectronic devices due to their spin-momentum-locked massless Dirac edge/surface states, which are topologically protected against all time-reversal-invariant perturbations. Here, we present the first experimental demonstration of near-infrared transparent flexible electrodes based on few-layer topological-insulator Bi(2)Se(3) nanostructures epitaxially grown on mica substrates by means of van der Waals epitaxy. The large, continuous, Bi(2)Se(3)-nanosheet transparent electrodes have single Dirac cone surface states, and exhibit sheet resistances as low as ~330 Ω per square, with a transparency of more than 70% over a wide range of wavelengths. Furthermore, Bi(2)Se(3)-nanosheet transparent electrodes show high chemical and thermal stabilities as well as excellent mechanical durability, which may lead to novel optoelectronic devices with unique properties.

Giant magneto-elastic coupling in multiferroic hexagonal manganites

The motion of atoms in a solid always responds to cooling or heating in a way that is consistent with the symmetry of the given space group of the solid to which they belong. When the atoms move, the electronic structure of the solid changes, leading to different physical properties. Therefore, the determination of where atoms are and what atoms do is a cornerstone of modern solid-state physics. However, experimental observations of atomic displacements measured as a function of temperature are very rare, because those displacements are, in almost all cases, exceedingly small. Here we show, using a combination of diffraction techniques, that the hexagonal manganites RMnO3 (where R is a rare-earth element) undergo an isostructural transition with exceptionally large atomic displacements: two orders of magnitude larger than those seen in any other magnetic material, resulting in an unusually strong magneto-elastic coupling. We follow the exact atomic displacements of all the atoms in the unit cell as a function of temperature and find consistency with theoretical predictions based on group theories. We argue that this gigantic magneto-elastic coupling in RMnO3 holds the key to the recently observed magneto-electric phenomenon in this intriguing class of materials.

The dynamics of solid cubane

Molecular solids are an intriguing class of materials in which molecules rather than individual atoms make up the underlying lattice. Because molecules possess rotational degrees of freedom that single atoms do not, molecular solids can exhibit orientational phase transitions. At sufficiently high temperatures the molecules can enter into a phase where they rotate about one or more axes, instead of librating about a fixed angular orientation as they do at low temperatures. Perhaps the best known molecular solid is solid C60 which is composed of nearly spherical molecules that exhibit a first-order orientational phase transition precisely because the C60 molecular symmetry deviates slightly from that of a sphere.

Structure and dynamics of zeolite frameworks and adsorbates

Zeolites represent an intriguing class of materials composed of infinite networks of silicon and aluminum atoms interconnected by oxygen atoms. The crystals of such materials often contain significant void space consisting of open cages and/or cylindrical pores. Aluminum and silicon are four-coordinate, which means in practice that charge-compensating cations are present in the void space to take into account the fact that aluminum is usually three-coordinate.