Intraplate Strike-slip Research Articles

Intraplate active deformation: Lake Salt fault zone and source of the Obruk (Bor-Niğde) earthquakes, Cappadocia-central Anatolia, Türkiye

Intraplate strike slip deformation structures play a crucial role in understanding how the earthquake are triggered, and respond to long-term deformation in plate interiors. One of the examples for intraplate structure is the Lake Salt Fault Zone (LSFZ) in Türkiye, located at the Central Anatolia region which has hosted a few moderate magnitude earthquakes. The LSFZ extends in NW-SE direction along the eastern border of the Lake Salt basin. In the western and central sections, it exhibits a rather linear trace, and it marks the west-northwestern boundary of the Cappadocian plateau. Along its strike, two big cities, namely, Aksaray and Niğde, and some significant eruption centers (the Hasan, Keçibuyduran and Melendiz Mountain stratovolcanoes) are located, and there is a 12 km right lateral offset. LSFZ has four main segments, namely, Karacaören, Keçikalesi, Obruk and Büyükkaraoğlan fault segments, and they have hosted two moderate-sized (Mw = 5.1 to 5.2) earthquakes (on September 20, 2020 and February 25, 2023) at the localities approximately 5 km ENE and SSW of Obruk Town (Niğde). Their focal mechanisms revealed that the LSFZ exhibits dominantly dextral strike-slip faulting with normal component. The vertical and horizontal displacement rates along the LSFZ are 0.14 mm/yr and 4.6 mm/yr, respectively. The recurrence interval of earthquakes of Mw ≥ 6.7 on the LSFZ is more than one thousand years, owing to the low slip rate. We propose that the LSFZ is in a seismic gap having potential to host a large earthquake.

Hydrologic Impacts of a Strike-Slip Fault Zone: Insights from Joint 3D Body-Wave Tomography of Rock Valley

ABSTRACT The Rock Valley fault zone (RVFZ), an intraplate strike-slip fault zone in the southern Nevada National Security Site (NNSS), hosted a series of very shallow (<3 km) earthquakes in 1993. The RVFZ may also have hydrological significance within the NNSS, potentially playing a role in regional groundwater flow, but there is a lack of local hydrological data. In the Spring of 2021, we collected active-source accelerated weight drop seismic data over part of the RVFZ to better characterize the shallow subsurface. We manually picked ∼17,000 P-wave travel times and over 14,000 S-wave travel times, which were inverted for P-wave velocity (VP), S-wave velocity (VS), and VP/VS ratio in a 3D joint tomographic inversion scheme. Seismic velocities are imaged as deep as ∼700 m in areas and generally align with geologic and structural expectations. VP and VS are relatively reduced near mapped and inferred faults, with the most prominent lower VP and VS zone around the densest collection of faults. We image VP/VS ratios ranging from ∼1.5 to ∼2.4, the extremes of which occur at a depth of ∼100 m and are juxtaposed across a fault. One possible interpretation of the imaged seismic velocities is enhanced fault damage near the densest collection of faults with relatively higher porosity and/or crack density at ∼100 m depth, with patches of semiperched groundwater present in the sedimentary rock in higher VP/VS areas and drier rock in lower VP/VS areas. A relatively higher VP/VS area beneath the densest faults persists at depth, which suggests percolation of groundwater via the fault damage zone to the regionally connected lower carbonate aquifer. Potentially, the presence and movement of groundwater may have played a role in the 1993 earthquake aftershocks.

Architecture of intraplate strike-slip fault zones in the Yanchang Formation, Southern Ordos Basin, China: Characterization and implications for their control on hydrocarbon enrichment

Commercial discoveries in the Ordos, Tarim, and Sichuan Basins of China have aroused widespread interest in strike-slip fault-controlled reservoirs. The productivity of different wells, however, can vary within one strike-slip fault zone, suggesting that variability in fault zone architecture controls hydrocarbon enrichment. To date, very few studies have finely and quantitatively explored fault zone architecture in the southern Ordos Basin, inhibiting hydrocarbon development. With the goal of understanding the architecture variability and scale of strike-slip fault zones in the subsurface, we carried out a refined and quantitative study of faults in the Jinghe Oilfield in the southern Ordos Basin by integrating outcrops, wellbore cores, well logs, and 3D seismic data. We quantitatively constrained the subsurface damage zone boundaries according to the slope changes in the cumulative CFI (comprehensive fracture index log) curves at logging scale and the cumulative FSI (fault shape index seismic attribute) curves at seismic scale. We proposed a model highlighting the effects of fault segmentation, architectural configuration, and damage zone asymmetry on the variability of fault zone architecture. Results showed that strike-slip faults can be divided into transtensional, pure strike-slip, and transpressional segments along the fault strike, with transtensional and pure strike-slip segments dominant in the Jinghe Oilfield. These segments exhibited six types of geometric structures, forming complex architectures with multi-fault cores and multi-damage zones surrounding the main and secondary faults. Each segment was further complicated by three configurations of gouge, breccia, and damage zones along the fault dip. The damage zone asymmetry further increased the architecture variability, with the fracture density and damage zone width of the hanging wall being greater than those of the footwall. Quantitative analysis showed that the fault zone width was the greatest for transtensional segments, intermediate for transpressional segments, and the lowest for pure strike-slip segments. And there was a positive linear correlation between the fault core width and the fault zone width (including the fault core and damage zone). Fault segmentation and damage zone asymmetry affected the hydrocarbon enrichment along the fault strike and dip within one strike-slip fault zone. We conclude that damage zones in transtensional segments, particularly in hanging walls, are primary targets for hydrocarbon development in the southern Ordos Basin.

Correlation of paleoearthquake records at multiple sites along the southern Yangsan Fault, Korea: Insights into rupture scenarios of intraplate strike-slip earthquakes

The construction of spatiotemporal models of earthquake occurrence for intraplate areas is challenging due to the low deformation rates in these areas. In this study, we conducted paleoseismological investigations along the southern Yangsan Fault (SYF), a typical low-deformation-rate fault, on the Korean Peninsula. The SYF is distinct from the northern Yangsan Fault (NYF), and the boundary between them is located at the junction between the NNE-striking YF and another major structure, the NNW-striking Ulsan Fault (UF), which branches off from the YF. Paleoseismological trenches at four sites along the SYF indicate that this fault section has not ruptured during the Holocene, in contrast to the NYF and UF. In detail, surface ruptures along the studied section of the SYF occurred during three different time periods, as inferred from stratigraphy and radiocarbon dating: 74 to 49 ka at two sites, 39 to 35 ka at another site, and 28,000 cal yr BP (or 30 ka considering the OSL age) to 16 ka at all sites. These results suggest two alternative rupture scenarios for the timing of paleoearthquakes along the studied fault section during the Late Pleistocene: (1) full rupture along the entire studied section during each earthquake event, or (2) multiple partial ruptures along the two structurally distinguishable parts of the studied fault section, that is, the Wolsan–Miho and Inbo north–Inbo sections. We conclude that geometric discontinuities of the long-lived YF system in the Korean Peninsula intraplate region have played an important role in controlling recent spatiotemporal rupture behavior.

Lithological and structural anatomy of an unusually well exposed strike-slip fault pressure ridge in the Nanjieshan, western China

We combine field observations, drone photogrammetry, and petrographic and XRD analysis to document the internal lithological and structural variability of an exceptionally well-exposed strike-slip fault pressure ridge, in the northern Tibetan foreland. The ridge exposes alternating dm-m thick discolored zones of fault gouge, breccia, and cataclasite likely reflecting the original Riedel shear array and progressive widening of the fault zone as comminution, fluid pressures, mineral alteration, and strain hardening and weakening processes evolved and migrated vertically and laterally within the core. The principal fabric defines an internal foliation fan, and sinistral, oblique-thrust faults bound the ridge supporting a transpressive squeeze-up origin. Outcrop- and micro-scale grain size reduction, gouge formation, and calcite precipitation suggest that thermal pressurization, mechanical lubrication, fault-valve fluid cycling, and periodic gouge zone lock-up may have been important factors controlling fault slip behavior and seismic energy release. Local variations in the distribution and thicknesses of brittle fault rocks, strain intensity, alteration mineralogy and fault core fabrics are a sobering reminder that a single 2-dimensional exposure across any regional fault system will fail to capture the complex petrological, mineralogical, mechanical and rheological heterogeneity that is typical of an evolving intraplate strike-slip fault system, especially where it reactivates an older fault/shear zone.

Late Cenozoic to Present Kinematic of the North to Eastern Iran Orogen: Accommodating Opposite Sense of Fault Blocks Rotation

The opposite-sense fault block rotation across the continental strike-slip faulting plays an important role in accommodating crustal deformation in the north of the East Iran orogen. This research constrains the post-Neogene kinematics of the NW-SE to E-W left-lateral transpressional zones at the northern termination of the N-S striking right-lateral Neh fault system in the East Iran orogen. Using two case studies, we analyzed the NW-SE Birjand splay and the E-W Shekarab transpression zone by analysis of satellite images, structural features, fault geometry and kinematics, GPS (Global Positioning System) velocities, fault- and earthquake-slip stress inversion, and paleomagnetic data. Our results show two distinctive regions of opposite-sense fault block rotations and with different rotation rates. As an asymmetric arc, the Birjand splay displays a transition from the prevailing N-S right lateral shear in the east to NW-SE left lateral transpression in the middle and E-W left lateral shear in the west. In the east, with clockwise fault block rotation, the N-S right lateral faults and the NW-SE oblique left-lateral reverse faults constitute push-ups through the restraining fault bends. In the west, with counterclockwise fault block rotation, the Shekarab transpression zone is associated with the duplex, pop-up, and shear folds. Our suggested kinematic model reveals that the N-S right-lateral shear is consumed on the left-lateral transpressional zones through the vertical axis fault block rotation. This led to an E-W shortening and N-S along-strike lengthening in the East Iran orogen. This research improves our understanding of how opposite fault block rotations accommodate India- and Eurasia-Arabia convergence in the north of the East Iran orogen. The suggested model has implications in the kinematic evolution of intra-plate strike-slip faulting through continental collision tectonics.

Deformation Styles and Multi-Stage Evolution History of a Large Intraplate Strike-Slip Fault System in a Paleozoic Superimposed Basin: A Case Study From the Tarim Basin, NW China

The complex deformation styles of large intraplate strike-slip fault systems in the multi-stage superimposed basin are hot topics worldwide. This article proposes structural models and evolution processes for such strike-slip fault systems in the Tarim Basin based on high-resolution 3D seismic data and deep wells. Our analyses reveal that strike-slip fault in the Tarim Basin formed with different structural styles in five tectonic layers from the Sinian to the Permian that accompanies the Sinian rift systems and uplift, the Lower–Middle Cambrian reversed faults and salt tectonics, the Ordovician fault-karst systems, the Silurian to the Carboniferous en-echelon transtensional faults, and the Permian volcanic structures. Influenced by the multi-tectonic layers and complex evolution history, the strike-slip faults performed as multi-layer flower structures and various fault types. The evolution history of paleo-uplifts also influenced the distribution characteristics of strike-slip faults, such as X, diamond, and V shapes in the Tabei uplift and T shapes in the Tazhong uplift. The strike-slip faults formed in late Cambrian stage were associated with unconformities, inverted structures, and growth strata in deep layers. The different tectonic evolution models of the Tabei and the Tazhong uplift were built, which shows pre-existing structures, the lithological combinations from the rift basin to the marine basin, and the change of regional tectonic stress from the Cambrian to Permian are controlling factors of the strike-slip fault systems. These models provide a new interpretation method for intraplate strike-slip fault systems worldwide.

Intraplate Strike-Slip Corridor within South America (NE Border of the Paraná Basin) Unveiled by Structural Analysis of Faults and Fracture Swarms

We present the effect of neotectonics in intracratonic settings as revealed by the surface, brittle deformation associated to a regionally-sized shear corridor, which affects Southeastern Brazil. The deformation zone is characterized by the presence of nearly orthogonal fracture sets, interpreted as systematic and non-systematic joints often cutting Quaternary deposits. An original methodology of fault and joint inversion by the Monte Carlo converging approach is used to infer multiple paleostress fields. The method provides the best orientation of the principal paleo-stresses responsible for the observed fracturing. At each step of the inversion process, structures are uniquely associated to the stress tensor that provides the lowest error. The results showed the poly-phased tectonic history of the shear corridor studied and paleostresses compatible with a regional strike-slip motion. Specifically, an E-W, left-lateral shear was followed by an E-W, right-lateral kinematics related to the post-Paleogene drifting of South American Plate and its clockwise rotation. The latter tectonic event is presently responsible for brittle deformation observed in Quaternary deposits. The proposed deformation corridor may represent the Cenozoic reactivation of an ancient weakness zone. We speculate that the described intraplate strike-slip deformation belt represents the continental prosecution of the Rio de Janeiro fracture zone.

Distribution and gas exploration of the strike–slip faults in the central Sichuan Basin

The Sichuan Basin has abundant oil and gas resources and it has been generally acknowledged as a super petroliferous basin. In recent years, immense exploration and development potential of deep natural gas emerges in the Sichuan Basin. The identification of strike–slip faults and their reservoir controlling effects are of great significance to develop a new exploration domain of fault-controlled gas reservoirs. In order to clarify the distribution of strike–slip faults in the Sichuan Basin and their relationships with natural gas exploration, in view that the strike–slip faults in this basin are small and complex with poor seismic data and influenced more by the fold deformation of Triassic gypsum salt beds, this paper identifies strike–slip faults and analyzes their characteristics, distribution and genesis based on the interpretation of continuous 3D seismic data of the central Sichuan Basin. Then, the fault-controlled gas reservoir model of strike-slip fault is established by reviewing old wells and evaluating geological conditions of hydrocarbon accumulation. Finally, the exploration potential and exploration direction of fault-controlled gas reservoirs are discussed. And the following research results are obtained. First, intraplate weak strike–slip faults can be identified by combining the seismic profile marker of strike–slip fault with the plane marker. Second, eight large strike–slip fault zones with a total length of 1280 km are identified and confirmed in the central Sichuan Basin. Third, strike–slip faults are mainly distributed in the Sinian–Permian System, mainly composed of small-displacement oblique faults and echelon faults, and different in stratification, grading, classification and segmentation. Fourth, under the control of the oblique subduction of the Proto-Tethys Ocean and the different structures of the basement, the strike–slip faults in the central Sichuan Basin were formed in the Sinian and there are multiple stages of inherited Caledonian–Hercynian activities. Fifth, the strike–slip faults in the central Sichuan Basin play a role in source–reservoir connection, reservoir stimulation, and gas accumulation and high yield, and constitute the fault-controlled natural gas accumulation system of “three-element controlling reservoir and composite hydrocarbon accumulation” based on source rock, fault and reservoir. In conclusion, a large intraplate strike–slip fault system is developed in the Sichuan Basin, which has the geological conditions of hydrocarbon accumulation to form strike–slip fault-controlled large gas field, and the large source connecting strike-slip fault zones are the main breakthrough directions of natural gas exploration in fault-controlled carbonate rocks.

Stress Interactions between an Interplate Thrust Earthquake and an Intraplate Strike-Slip Event: A Case Study of 2018 Mw 7.9 Gulf of Alaska Earthquake

ABSTRACT Most major earthquakes that have occurred in Alaska are related to rupture of the megathrust along the Alaska–Aleutian subduction zone. Large intraplate earthquakes in the oceanic lithosphere are rare. Recently, one large intraplate earthquake occurred near the Alaska subduction zone: the Mw 7.9 Gulf of Alaska earthquake (23 January 2018). The stress interaction between interplate megathrust and intraplate earthquake has been of interest because it helps to understand stress transfer and seismic hazard estimation. To explore the phenomenon of stress transfer, a viscoelastic spherical finite-element-method model accounting for topographic relief and lateral viscosity variations was used to calculate time-dependent stress transfer associated with the 1964 Mw 9.2 Alaska earthquake. We used postseismic Global Positioning System measurements to probe the differences in rheological properties between the continental mantle and oceanic mantle. The best-fitting model determined the viscosities of the continental mantle and oceanic mantle to be 3×1019 and 1×1020 Pa·s, respectively. Then, we calculated the viscoelastic stress transfers based on this viscosity structure. Because of viscoelastic stress loading associated with the 1964 Alaska earthquake, the ΔCFS values on the 2018 Alaska earthquake rupture fault exceeded the threshold (0.01 MPa) for triggering earthquakes.

Paleomagnetism of the Franz Josef Land Archipelago: Application to the Mesozoic Tectonics of the Barents Sea Continental Margin

Abstract We report new paleomagnetic and geochronological data for rocks of the Franz Josef Land archipelago and generalize available information about the paleomagnetism of the Barents Sea continental margin as applied to the issues of the Mesozoic Arctic tectonics. Specifically, the obtained age estimates are indicative of a brief episode of mantle plume magmatism at the Barremian–Aptian boundary (Early Cretaceous). The paleomagnetic data shows that intraplate magmatism formations in the High Arctic, including the Franz Josef Land traps, are nothing else than a trace of the Iceland plume on the migrating tectonic plates of the region. Thus, the Iceland plume was geographically stationary for at least the last 125 Myr. Our paleotectonic reconstructions suggest a direct connection of the intraplate strike-slip systems of the Eurasian continent with the configuration and subsequent evolution mode of Mesozoic marginal basins and spreading axes during the initial opening stage of the Arctic Ocean.

Internal architecture and earthquake rupture behavior of a long-lived intraplate strike–slip fault: A case study from the Southern Yangsan Fault, Korea

Deciphering the internal composition of large-scale fault zones helps to better understand the various geologic factors that govern their seismic rupture behavior. We used new detailed geologic, structural, and geomorphic map of an excellent natural laboratory in the Southern Yangsan Fault (SYF) in the southeastern part of the Korean Peninsula to elucidate the fault zone architecture and its controls on the rupture processes of neotectonic earthquakes. The Yangsan Fault is a major strike–slip fault, and a subsidiary fault within the fault zone ruptured during the 2016 ML 5.8 Gyeongju earthquake which is the largest instrumental record in the intraplate Korean Peninsula. The 12-km-long study area in the SYF shows along-strike variations in wall rock lithology and fault zone architecture. At the south of the study area, the fault zone surrounded by crystalline rocks consists of a single major fault core. In contrast, at the north, the fault zone is sandwiched between crystalline rocks and sedimentary rocks and exhibits multiple major fault cores bounding broken-up wall rock blocks. The width of the across-fault damage zone, which was estimated from the cumulative fracture frequency with the distance from the major fault core, widens northward, indicating the distributed deformation of the northern fault zone over a long history of fault evolution. The geometry of paleoearthquake surface ruptures traced by the geomorphic and stratigraphic evidence of deformed young deposits diverge to multiple strands in the northern fault zone but converge to a single strand in the southern fault zone, directly reflecting its internal architecture. We propose that the long-lived rupturing patterns have been primarily controlled by intrinsic discontinuity- and mineralogy-dependent deformation processes in terms of strain-hardening vs. strain-weakening, along with propagation arrest and rupture tip damage due to a fault-bend geometry (geometric barrier) and an abrupt change in wall rock lithology (relaxation barrier).

Origin and growth mechanisms of strike-slip faults in the central Tarim cratonic basin, NW China

Through fault structure analysis and chronology study, we discuss the origin and growth mechanisms of strike-slip faults in the Tarim Basin. (1) Multiple stages strike-slip faults with inherited growth were developed in the central Tarim cratonic basin. The faults initiation time is constrained at the end of Middle Ordovician of about 460 Ma according to U-Pb dating of the fault cements and seismic interpretation. (2) The formation of the strike-slip faults was controlled by the near N-S direction stress field caused by far-field compression of the closing of the Proto-Tethys Ocean. (3) The faults localization and characteristics were influenced by the pre-existing structures of the NE trending weakening zones in the basement and lithofacies change from south to north. (4) Following the fault initiation under the Andersonian mechanism, the strike-slip fault growth was dominantly fault linkage, associated with fault tip propagation and interaction of non-Andersonian mechanisms. (5) Sequential slip accommodated deformation in the conjugate strike-slip fault interaction zones, strong localization of the main displacement and deformation occurred in the overlap zones in the northern Tarim, while the fault tips, particularly of narrow-deep grabens, and strike-slip segments in thrust zones accumulated more deformation and strain in the Central uplift. In conclusion, non-Andersonian mechanisms, dominantly fault linkage and interaction, resulted in the small displacement but long intraplate strike-slip fault development in the central Tarim Basin. The regional and localized field stress, and pre-existing structures and lithofacies difference had strong impacts on the diversity of the strike-slip faults in the Tarim cratonic basin.

Reply to Belkhiria W. and Inoubli M.H. comment on “Deformation styles related to intraplate strike-slip fault systems of the Saharan-Tunisian Southern Atlas (North Africa): New kinematic models”

Reply to Belkhiria W. and Inoubli M.H. comment on “Deformation styles related to intraplate strike-slip fault systems of the Saharan-Tunisian Southern Atlas (North Africa): New kinematic models”

Comment on “deformation styles related to intraplate strike-slip fault systems of the Saharan-Tunisian southern Atlas (North Africa): New kinematic models” by soumaya et al.

Comment on “deformation styles related to intraplate strike-slip fault systems of the Saharan-Tunisian southern Atlas (North Africa): New kinematic models” by soumaya et al.

A self-similar dynamic rupture model based on the simplified wave-rupture analogy

SUMMARYThe investigation of stresses, faults, structure and seismic hazards requires a good understanding and mapping of earthquake rupture and slip. Constraining the finite source of earthquakes from seismic and geodetic waveforms is challenging because the directional effects of the rupture itself are small and dynamic numerical solutions often include a large number of free parameters. The computational effort is large and therefore difficult to use in an exploratory forward modelling or inversion approach. Here, we use a simplified self-similar fracture model with only a few parameters, where the propagation of the fracture front is decoupled from the calculation of the slip. The approximative method is flexible and computationally efficient. We discuss the strengths and limitations of the model with real-case examples of well-studied earthquakes. These include the Mw 8.3 2015 Illapel, Chile, megathrust earthquake at the plate interface of a subduction zone and examples of continental intraplate strike-slip earthquakes like the Mw 7.1 2016 Kumamoto, Japan, multisegment variable slip event or the Mw 7.5 2018 Palu, Indonesia, supershear earthquake. Despite the simplicity of the model, a large number of observational features ranging from different rupture-front isochrones and slip distributions to directional waveform effects or high slip patches are easy to model. The temporal evolution of slip rate and rise time are derived from the incremental growth of the rupture and the stress drop without imposing other constraints. The new model is fast and implemented in the open-source Python seismology toolbox Pyrocko, ready to study the physics of rupture and to be used in finite source inversions.

Deformation styles related to intraplate strike-slip fault systems of the Saharan-Tunisian Southern Atlas (North Africa): New kinematic models

The complex geometry and tectonic evolution of the Saharan-Tunisian Southern Atlas strike-slip fault systems, North Africa, have not been investigated comprehensively to date. This paper proposes new conceptual models to better understand the structural styles along these intraplate fault zones. We use a multidisciplinary approach including field observations, geological mapping, stress analysis and seismic data to investigate the development and interaction of major strike-slip fault segments. The regional fault system is dominated by the E-W trending Biskra, Alima, Orbata, Bouhedma and Chotts basement faults that constitute the Principal Displacement Zones (PDZs).Our analyses and interpretations reveal that each PDZ has a typical dextral strike-slip architecture comprising multi-scale fault segments that are linked through dilational and contractional stepovers/bends. During Mesozoic times, under NE-SW Shmin, the transtensional fault segments of Biskra and Alima formed the boundaries of the Khanguet Sidi Neji-Gafsa (KSG) Basin, which developed as a Z-shaped dextral releasing stepover. During the Cenozoic, the KSG Basin was inverted, under NW-SE SHmax, in response to the Africa-Eurasia convergence. This inversion occurred mainly along basin sidewalls by reactivation of the pre-existing normal-oblique faults as right-lateral transpressional shears. Further east, the E-W dextral strike-slip faults of Orbata and Bouhedma connected via a NE-SW restraining stepover.Finally, all E-W dextral strike-slip fault segments are associated with ENE right-stepping en echelon folds and Riedel shear patterns of different scales, in response to basement wrenching. Currently, most fault zones are still active with deep strike-slip earthquakes.

Joint inversion of GPS and high-resolution GRACE gravity data for the 2012 Wharton basin earthquakes

The Wharton basin is situated in the north-eastern part of the Indian Ocean. In 2012 it hosted the largest intraplate strike-slip earthquakes ever recorded by geophysical networks. The Mw 8.6 earthquake of April 11, 2012, was preceded by a major foreshock (Mw 7.2) on January 10 and was followed two hours afterward by a Mw 8.2 event. These three large events occurred at the diffuse boundary between the Indian and Australian plates and were almost pure strike-slips on sub-vertical rupture surfaces. Using GRACE data, we first extracted the coseismic and postseismic gravity signals caused by these earthquakes. Then we fitted both GPS and the highest available spatial resolution of GRACE data using the geometry of the fault system suggested by Hill et al. (2015). We propose a regularization, which allows to solve for a linear problem in order to invert GPS and GRACE data under constraints on the rake angle. Our inversion yields a uniform displacement field on all elements of a given fault plane. Our solution shows that even the main displacement occurred on WNW trending faults, comparable displacement also occurred on a rupture striking NNE. Hence, we show that the deformation in this diffuse plate boundary region in 2012 was accommodated by displacements along both fault-systems.A viscoelastic relaxation of the asthenosphere with a Maxwell viscosity 1019 Pa∙s successfully explains the postseismic displacements at GPS sites and postseismic gravity signals. The limited postseismic aftershock activity suggests small postseismic slip in the area of the 2012 Wharton earthquakes contrary to what is often observed after large subduction event. Because a part of the observed signal could be related to afterslip, our obtained Maxwell viscosity value should be considered as a lower limit of the asthenospheric viscosity below the Wharton basin.

The role of intraplate strike-slip faults in shaping the surrounding morphology: The Ovacık Fault (eastern Turkey) as a case study

Although the westward extrusion of the Anatolian Block is mainly compensated along its boundary faults, the North Anatolian and the East Anatolian shear zones, it is internally deformed in a dominant manner by some strike-slip faults as well. To obtain a better understanding about this intraplate deformation of the Anatolian Block, we investigate the tectonic geomorphology of the Ovacık Fault (OF), which is the northeastern member of the Malatya-Ovacık Fault Zone (MOFZ). Further, we apply the most common geomorphic indices, such as the hypsometric curve and integral, longitudinal channel profiles, channel steepness and concavity, mountain front sinuosity, and valley height-width ratio to characterise and quantify the deformation along the OF and the surrounding region where the regional morphology is shaped with the joint effect of palaeo- and neotectonics and other morphological factors such as palaeoglacial processes. The highest hypsometric integral, steepness and concavity values are generally observed along the northeastern strand of the OF (the Munzur Mountains) and the Kemaliye Region. Further, we interpret that high HI and steepness values indicate a regional tectonic uplift because of either a change in fault geometry, which gives rise to the vertical component on the OF, or a regional high convergence zone. Furthermore, this study gives the first calculation of vertical uplift in the northern margin of the Ovacık Basin (OB) as at least 0.5 mm/y for long term deformation history. Thus, our results exhibit that the OF is one of the intraplate strike-slip faults of the Anatolian Block.

The development of a regional-scale intraplate strike-slip fault system; Alpine deformation in the north of Ireland

A paucity of displacement markers can make constraining the kinematics and interaction of regional-scale strike-slip faults difficult. In this study, a high-resolution aeromagnetic survey allows quantitative analysis of kilometre-scale Paleogene faulting in the north of Ireland. Mapping offset dykes and igneous centres reveals the presence of two orientations of Cenozoic strike-slip faults attributed to broadly N-S Alpine shortening arising from the convergence of Africa and Europe. Reactivated NE-SW striking faults accommodated up to 2.3 km of sinistral displacement mainly during the Paleocene. Following tectonic quiescence, up to 2.5 km of Oligocene-aged dextral movement was accommodated on newly-formed NNW-SSE striking faults. Displacement analysis suggests that the faults were kinematically linked and experienced a switch in polarity of the predominantly active fault orientation during the Paleogene, forming an apparent conjugate system with asymmetric displacement distributions. The switch in fault polarity is attributed to a rotation in the regional maximum horizontal stress orientation and the locus of deformation moving from pre-existing reactivated structures to newly formed faults. The analysis also illustrates that, despite low strain rates, the interaction of the principal components of the fault system controlled the formation of sedimentary basins and defined the present-day geography of the region, far from an active plate boundary.