Intraplate Stress Research Articles

Lithospheric weakspots, not hotspots: New England-Quebec and Shenandoah anorogenic magmatism in the context of global plate tectonics, intraplate stress and LIPs

Lithospheric weakspots, not hotspots: New England-Quebec and Shenandoah anorogenic magmatism in the context of global plate tectonics, intraplate stress and LIPs

The Intraplate Stress Field of West Africa

AbstractWest Africa continues to host a growing number of low and intermediate‐magnitude earthquakes (M2‐5) along its passive margins, and its continental interior. Earthquake activity in these regions raises the need to comprehend the causes and the tectonic controls of the seismicity. Unfortunately, such studies are rare. Here, we apply single‐station inversion techniques to constrain fourteen focal mechanisms, computed after compiling a set of high‐quality waveforms. We describe the connection between seismicity, the contemporary stress field, anthropogenic activity and Holocene fault scarps in the region. Our results indicate transpressive stresses acting on the inherited brittle structures in the passive margins. We also observe a compressive regime in the intracontinental failed rifts. We attribute the seismicity to the reactivation of “weak” faults in the Neoproterozoic and Mesozoic failed rifts, the passive transform structures, and the intracratonic Precambrian brittle shear zones.

Influence of Farallon Slab Loading on Intraplate Stress and Seismicity in Eastern North America in the Presence of Pre‐Existing Weak Zones

AbstractDespite the stability of the continental interior, eastern North America has hosted many significant historical earthquakes. Seismicity concentrates within tectonically inherited structures, which can act as weak zones where stress accumulates. Within these zones, systematic stress rotations may be explained by long‐wavelength sources. We test the hypothesis that mantle‐flow driven by the Farallon slab contributes to intraplate seismicity via the reactivation of pre‐existing faults. We model the stress field using seismically constrained global high‐resolution finite‐element flow models with CitcomS. To isolate the slab's effect, we vary its buoyancy between a case of neutrality and a case with full negative thermal buoyancy derived from tomography. Low‐viscosity lithospheric weak zones located at failed rifts, loaded by a mass anomaly at depth, transmit elevated stresses to the overlying crust. The sinking of the Farallon slab drives localized mantle flow beneath the central‐eastern US, generating a large stress amplification of 100–150 MPa peaking over the New Madrid Seismic Zone (NMSZ). This stress amplification exerts a continent‐wide clockwise rotation on the stress field, which in the presence of weak zones reproduces some observed deviations of the seismically inferred SHmax from the regional borehole SHmax, bringing optimally oriented faults, closer to failure, some of which are associated with major historical earthquakes, including the Reelfoot Fault in the NMSZ and the Timiskaming Fault in Western Quebec. However, stronger lithospheric viscosity gradients, shallower weak zones, or weaker faults are still needed to fully reproduce the observed stress field in some areas.

Diagenetic products, settings and evolution of the pre-salt succession in the Northern Campos Basin, Brazil

Abstract Despite all the effort made towards an understanding of the sedimentary, tectonic and diagenetic evolution of the pre-salt sequence and the Pre-Salt reservoirs of the Northern Campos Basin (East Brazil), two knowledge gaps have yet to be filled: (1) a detailed study of diagenesis in the crystalline basement and rift phases; and (2) the timing of diagenetic events that affected the pre-salt succession. In this study, samples from these geologic units were analysed for mineral composition and paragenetic evolution, fluid temperature and salinity, stable isotope compositions and laser ablation inductively coupled plasma mass spectrometer derived U–Pb ages of carbonate phases. The U–Pb ages of replacive and vein-filling cements reveal three tectono-diagenetic events, named the Barremian–Aptian (BADE, 125–117 Ma), the Albo–Cenomanian (ACDE, 103–98 Ma) and the Campanian–Maastrichtian (CMDE, 83–70 Ma). Each phase is characterized by distinct minerals, precipitation temperatures and burial conditions. The hydrothermal qualifier, identified by the temperature contrast between fluid and host rock, was initially high during BADE, then diminished over time (through ACDE) until it achieved equilibrium with the host rocks during CMDE. Diagenetic events are not coeval with magmatism but do coincide with known regional tectonic events described in the literature and are interpreted to be the result of increasing intraplate stresses. Multidisciplinary studies that include diagenetic events constrained by geochronological data will certainly lead to more robust conceptual geologic models, and, therefore, to a more reliable management of resources and strategies such as enhanced oil recovery, carbon capture, utilization and storage, and drinking water.

Intraplate stress distribution within the Indian Plate: Insights from finite element modelling

The Indian Plate is bounded by different types of plate boundaries like divergent, convergent/collisional, transform and consists of oceanic and continental lithosphere. Due to such tectonic settings, the intraplate tectonic stress distribution across the Indian Plate is very complex. Further, available in-situ stress information over the Indian Plate is relatively sparse; therefore, numerical modelling of maximum horizontal compressive stress (SHmax) is needed to comprehend regional stress patterns. In the present work, stress simulations are carried out to explore the effects of rigidity, lithospheric thickness, and boundary forces on the distribution of intraplate stress across the Indian Plate. The rigidity is derived from effective elastic plate thickness (Te), which is estimated through joint inversion of admittance and coherence using the wavelet transform approach. The stress field is simulated for four cases for different combinations of Te, lithospheric thickness and tectonic forces and compared with in-situ stress observations. The analysis of models shows that the magnitude of SHmax is primarily controlled by boundary forces, Te and scaled by lithospheric thickness; and its orientations are mostly governed by the applied tectonic forces and rigidity. Spatial distribution of earthquakes correlated well with the von-Mises stress and high von-Mises stresses are accumulated at earthquake prone regions. The stress field and von-Mises stress over major geological features are also analyzed and discussed. Apart from boundary forces, it is inferred that Te is one of the most significant factors which controls the stress field distribution.

Diagenetic Products, Settings and Evolution of the Presalt Succession in the Northern Campos Basin, Brazil

Abstract Despite all the effort made towards an understanding of the sedimentary, tectonic, and diagenetic evolution of the presalt sequence and the Pre-Salt reservoirs of the North Campos Basin (East Brazil), two knowledge gaps have yet to be filled: 1) a detailed study of diagenesis in the crystalline basement and rift phases, and 2) the timing of diagenetic events that affected the presalt succession. In this study, samples from these geologic units were analysed for mineral composition and paragenetic evolution, fluid temperature and salinity, stable isotope compositions, and LA-ICP-MS derived U-Pb ages of carbonate phases. The U-Pb ages of replacive and vein-filling cements reveal three tectono-diagenetic events, named Barremian-Aptian (BADE, 125-117 Ma), Albo-Cenomanian (ACDE, 103-98 Ma), and Campanian-Maastrichtian (CMDE, 83-70 Ma). Each phase is characterised by distinct minerals, precipitation temperatures, and burial conditions. The hydrothermal qualifier, identified by the temperature contrast between fluid and host rock, was initially high during BADE, then diminished over time (through ACDE) until it achieved equilibrium with the host rocks during CMDE. Diagenetic events are not coeval with magmatism but do coincide with known regional tectonic events described in the literature and are interpreted to be the result of increasing intraplate stresses. Multidisciplinary studies that include diagenetic events constrained by geochronological data will certainly lead to more robust conceptual geologic models, and therefore, to a more reliable management of resources and strategies such as Enhance Oil Recovery (EOR), Carbon Capture, Utilisation and Storage (CCUS), and drinking water. Supplementary material at https://doi.org/10.6084/m9.figshare.c.7103900

Onset of double subduction controls plate motion reorganisation

Face-to-face double subduction systems, in which two oceanic plates subduct toward each other, are essential elements of plate tectonics. Two subduction zones in such systems are typically uneven in age and their spatially and temporally variable dynamics remain enigmatic. Here, with 2D numerical modelling, we demonstrate that the onset of the younger subduction zone strongly changes the dynamics of the older subduction zone. The waxing younger subduction may gradually absorb plate convergence from the older one, resulting in older subduction waning featured by the dramatic decrease in subduction rate and trench retreat. The dynamical transformation of subduction predominance alters the intraplate stress and mantle flow, regulating the relative motion among the three different plates. The process of waxing and waning of subduction zones controls plate motion reorganisation, providing a reference to interpret the past, present, and future evolution of several key double subduction regions found on the modern Earth.

The 4.5 mb Amargosa earthquake of 30 August 2020, Bahia, Brazil: Implications for the intraplate stress field across the continental margin

The 4.5 mb Amargosa earthquake was the largest event to occur in the state of Bahia, NE Brazil, in more than 100 years. It caused intensity VI MM in the epicentral area and was felt up to more than 200 km away. A previously published focal mechanism determination had suggested a normal faulting event at about 10 km depth. However, our detailed analyses of regional and teleseismic records show, in fact, a reverse faulting mechanism and a very shallow depth of about 1 km. The shallow hypocentral depth was consistently determined by modeling of teleseismic P waves, as well as waveform inversion of regional stations for moment tensor solution. Our focal mechanism solution is also consistent with the relative location of the aftershocks which shows the fault plane to be oriented ESE-WNW dipping to the SSW. The P axis is oriented about NNE-SSW, parallel to the coast. In the interior of the continent, the maximum horizontal stresses tend to be roughly E-W oriented. The margin parallel P axis of the Amargosa earthquake is similar to other SHmax estimates from breakout data in the marginal basins and is yet another example of stress rotation due to local effects associated with the continental/oceanic crustal transition.

Cenozoic tectonic reactivation and its implications for landscape transience in southeastern Brazil

AbstractIntraplate settings far from tectonic plate boundaries are normally thought to be tectonically inactive regions in which the landscape evolves via the slow downcutting of fluvial systems. When identified, tectonic reactivations are thought to be of too low an amplitude and not cause any change in the landscape. However, in the absence of datable markers of tectonic deformation, the landscape can be used as a passive marker of intraplate tectonic activity. In this study, we investigate the northern boundary of the Ponta Grossa Arch in the southeastern portion of the Brazilian passive margin. We mapped and studied the spatial and temporal (relative) relationships between brittle structures and geomorphic markers of base level changes. Drainage anomalies (knickpoints and high ksn values) are correlated with structural/tectonic lineaments in which we recognize strike‐slip and transtensional faults with right‐lateral and left‐lateral kinematics. Through mapping and analysis of structural data, we constrained the underlying structural framework. The fault data demonstrate the counterclockwise rotation of the maximum stress field, which moved from the NE–SW orientation (at the Cretaceous‐Paleogene boundary) to N‐S to reach the current WNW‐ESE position. Together, the data suggest that, though subtle and low‐magnitude, the evolution of intraplate stress field forms a dynamic forcing of intracontinental landscape change.

Blast response of bioinspired nacre-like staggered composite plates combined with steel and polyurea

Inspired by the mother-of-pearl layered structure, a multilayered staggered composite plate (SCP) consisting of steel and polyurea was designed, and its dynamic responses under high impulse loads were investigated. The precision of the numerical model design and parameter selection was first validated by the blast experiment results of a normal composite plate (NCP). The center point displacement, velocity, and acceleration of the NCP and SCP were compared, and the corresponding values for the SCP decreased by 38.43%, 5.77%, and 63.30%, respectively. The backplate overpressure and intra-plate stress of the SCP were reduced by 86.67% and 81.48%, respectively. The SCP greatly improved the energy absorption efficiency through the phenomena of interlocking, friction, and slippage between layers. As the delamination number of the SCP increased, both the displacement, velocity, and acceleration of the center point and the energy absorption efficiency increased. When the polyurea layer thickness ratio and the steel table thickness ratio were 0.1675 and 0.125, respectively, the deformation response and energy absorption efficiency of the SCP tended to be similar. Finally, the effective modulus of elasticity of the SCP was analyzed based on a shear-lag model.

Strike slip motion and the triggering of subduction initiation

Plate tectonic reconstructions of three of the best-defined Cenozoic subduction initiation (SI) events in the western Pacific, Izu-Bonin-Mariana, Vanuatu, and Puysegur subduction zones, show substantial components of strike-slip motion before and during the subduction initiation. Using computational models, we show that strike-slip motion has a large influence on the effective strength of incipient margins and the ease of subduction initiation. The parameter space associated with visco-elasto-plastic rheologies, plate weakening, and plate forces and kinematics is explored and we show that subduction initiates more easily with a higher force, a faster weakening, or greater strike-slip motion. With the analytical solution, we demonstrate that the effect of strike-slip motion can be equivalently represented by a modified weakening rate. Along transpressive margins, we show that a block of oceanic crust can become trapped between a new thrust fault and the antecedent strike-slip fault and is consistent with structural reconstructions and gravity models of the Puysegur margin. Together, models and observations suggest that subduction initiation can be triggered when margins become progressively weakened to the point that the resisting forces become smaller than the driving forces, and as the negative buoyancy builds up, the intraplate stress eventually turns from compressional into extensional. The analytical formulation of the initiation time, tSI, marking the moment when intraplate stress flips sign, is validated with a computational models. The analytical solution shows that tSI is dominated by convergence velocity, while the plate age, strike-slip velocity, and weakening rate all have a smaller but still important effect on the time scale of subduction initiation.

Palaeostress analysis using fault-slip data from the Xiangdong tungsten deposit in the central south China continent: Evolution of intraplate stress in the Middle Mesozoic

In the central South China continent, the Xiangdong tungsten deposit associated with Late-Jurassic granitic intrusion offers an opportunity to examine the evolution of intraplate stress between the Late Jurassic and Early Cretaceous, which was a time of transition from regional shortening to regional extension. NE–ENE-striking, steeply-dipping, opening-mode tungsten-bearing quartz veins constitute the deposit. Favorable conditions for vein formation where densely spaced arrays have non-curving tips occur under remote stress with a large stress difference and hence in this case probably aligned with the horizontal maximum principal stress axis. Palaeostress analysis using fault-slip data measured on the side walls of underground mine levels yielded the optimal solution of two stresses characterized by an NNW–SSE-shortening strike-slip regime and an NNW–SSE extensional regime. Based on field observations, the first tectonic phase existed during meso- and epi-thermal mineralization, probably owing to the collision between the Siberia and Mongolia–Sino-Korean continents far to the north at the time, and the second tectonic phase appeared after hydrothermal mineralization, as a result of Cretaceous regional rifting. Therefore, multiple strike-slip deformations would have involved the study area during hypo- and epi-thermal mineralization in the Late Jurassic. This evidence does not support the mainstream extension model for Mesozoic tungsten mineralization in central South China.

Stress State of the Stable Part of the Pacific Plate Predicted by a Numerical Model of Global Mantle Flow Coupled with Plate Motion

Abstract The Pacific plate, which is the largest oceanic plate on Earth, has implications for the general understanding of plate dynamics, including the origin of intraplate stress and the driving force for plate motion. However, this is currently limited by the scarcity of geophysical and geological observational data. In this study, an instantaneous global mantle flow calculation was performed to predict the intraplate stress field and stress regimes on the Pacific plate using a geodynamic model based on the density anomaly structure of the mantle converted from a seismic tomography model incorporating subducting plates. The numerical results demonstrate that the southern part of the Pacific plate is dominated by a normal faulting regime. In contrast, the northern part is dominated by a thrust faulting regime, in which the tensional stress axes in the older and stable part of the Pacific plate tend to be oblique to the direction of plate motion. This suggests that the stress state of the Pacific plate is almost neutral (i.e., neither compressional nor tensional) along the direction of plate motion. Furthermore, shallow positive buoyancy-induced asthenospheric flow is essential for reproducing the observed plate motion of the Pacific plate.

Transtensional tectonics during the Gondwana breakup in northeastern Brazil: Early Cretaceous paleostress inversion in the Araripe Basin

Intraplate deformation during the Mesozoic breakup of West Gondwana predominantly occurred along major ancient lithospheric discontinuities. The Precambrian Patos Shear Zone (PASZ) is an inherited lithospheric discontinuity in the interior of northeastern Brazil which is closely linked to the evolution of the Araripe Basin. In this study, unlike previous interpretations of purely extensional tectonics, we conducted stratigraphic and structural field mapping as well as paleostress reconstruction to demonstrate the role of intraplate transtensional tectonics during the Araripe Basin evolution. Limited to the north by the PASZ and associated with sinistral reactivation, a set of normal to oblique NE–SW faults constituting a transtensional horsetail structure generated the initial basin geometry. Stratigraphic records of this rift phase comprise the Jurassic to Early Cretaceous Brejo Santo, Missão Velha, and Abaiara formations. Paleostress reconstruction showed a NE–SW/subhorizontal σ1 axis, a vertical σ2 axis, and a NW–SE/subhorizontal σ3 axis, resulting in a sinistral transtensional tectonic regime, which was mainly governed by intraplate processes that reflected the opening of the Brazilian East Margin. The subsequent Aptian post-rift early phase was characterized by NE–SW reverse faults and a succession of normal to oblique normal faults striking NW–SE to WNW–ESE. This fault arrangement generated a new NW–SE transtensional basin, which controlled the Barbalha Formation and modified and partially preserved the previous NE-SW transtensional basin. Paleostress reconstruction showed a NW–SE/subhorizontal σ1 axis and NE–SW/subhorizontal σ3 axis for strike-slip faults but NE–SW extension for normal faults. This is related to a second dextral reactivation of the PASZ following propagation of intraplate stress during the opening of the Brazilian Equatorial Margin. In summary, tectonic evolution of the Araripe Basin was strongly influenced by stress propagation from the Gondwana breakup into intraplate settings, with two distinct reactivations of the PASZ pre-existing basement structures which results in a paleostress inversion during basin evolution.

Aptian−Albian extension in Tethyan rifted continental passive margin of Tunisia inferred from sequential restorations of balanced cross-sections and expansion index

This article presents an overview of regional extensional deformation across the north-facing southern Tethyan continental passive margin of Tunisia during the Aptian and Albian syn-rift stages. Because of the Late Eocene, Late Miocene and Pleistocene orogenic overprinting, the earlier extensional history of the Tunisian Atlassic province had to be reconstructed from balanced and sequentially restored transects across four key fault systems active at the time. These were used to (i) estimate the amount and timing of extension and (ii) calculate the expansion index (EI) for each fault system. The analysis demonstrates the region experienced a very significant amount of mid-Cretaceous extension, representing the last of several Permian-Mesozoic rift events. Two closely linked styles of deformation were recognised: thick-skinned basement involved faulting and shallow listric faulting detached on decollement surfaces within late Triassic evaporites. Both styles of faulting triggered salt diapirism.Sequential pre-orogenic restorations of a transect across the Tebaga Kebili and Orbata faults in the southern part of this province suggest both experienced a large amount of extensional displacement during the Aptian and Albian (Aptian-Albian extension = 2.6 km), recorded by footwall erosion, growth strata, rollover structures and changes in sedimentary facies. A similar restoration across the Labaiedh (M'rhila-Cherichira) fault system further north, identified both thick and thin-skinned extensional movement associated with diapiric growth and salt extrusion reaching a maximum during the Aptian (Aptian-Albian extension = 0.55 km). A pre-Tertiary restoration of the Teboursouk fault system in the northern part of the province, demonstrated thick-skinned extension peaking during the Albian (Aptian-Albian extension = 0.4 km). This accommodated a thick sequence of basinal shales to the north, deformed by active diapirism with sea-floor salt extrusion, triggered by deep basement faulting and enhanced by the plastic incompetent character of the thick shale dominant overburden.Regional extension across the Tunisian Atlassic province during the Aptian-Albian was contemporaneous with a significant change in intra-plate stress across northern Africa, the opening of the South Atlantic and structural reorganization along the East African continental margin. This synchroneity across such a wide region may reflect some still poorly understood deep crustal processes, ultimately responsible for reactivating older rift faults and regional tilting across the province. The associated gravity salt gliding and diapirism bear comparison with the post-rift deformational style of the South Atlantic passive margin. However intra-evaporite decollement surfaces were more local, limited by active thick-skinned faulting with diapirism typically soft linked to deeper fault movement.

Inversion tectonics in the Sorgenfrei–Tornquist Zone: insight from new marine seismic data at the Bornholm Gat, SW Baltic Sea

ABSTRACT New seismic profiles located within the Bornholm Gat in the SW Baltic Sea area image Late Cretaceous-Paleogene inversion and exhumation of a previously poorly characterized narrow crustal zone in the southern end of the Sorgenfrei–Tornquist Zone (STZ), a long pre-Alpine tectonic lineament in Europe. Thrusts and pop-up structures developed along the inversion axis accompanied by subsidence troughs on its sides. Stratigraphic analysis of chalk deposits indicates that structural shortening and inversion resulted from compressional deformation. Marginal troughs formed synchronously to inversion and adjacent to the tectonically active slope, where sediment redeposition was focused. Deposition of chalk units, composed predominantly of contourites and gravity-driven sedimentation were largely controlled by inversion tectonics and influenced by intensification of bottom currents. We find that allochthonous chalk has been buried in horizontally deposited autochthonous (pelagic) chalk. An erosional unconformity represents the base of the Maastrichtian and marks the onset of along slope deposition due to a more hydrodynamic environment. The revealed asymmetric inversion across the STZ with fold tightening and superposition of NE-NW folds attest to more than one pulse during the Late Cretaceous-Cenozoic inversion. The STZ may belong to the end-member mode of intraplate foreland basins resulting from a far-field NE-SW compression transmitted from the Africa-Iberia-Europe convergence. The intraplate stress associated with the following Maastrichtian enhanced collisional coupling between the Alpine-Carpathian orogen and its foreland, which is widely recognized (e.g., the Mid-Polish Trough, the Bohemian Massif and the Central Graben), may also have had its maximum extent to the northeast in southern Sweden.

Gravity Survey on the Oil-Bearing Dammam Dome (Eastern Saudi Arabia) and Its Implications

A detailed gravity survey with 235 measurements was carried out at the King Fahd University of Petroleum and Minerals campus, which is located at the crest of the oil-bearing Dammam Dome (Eastern Province of Saudi Arabia). This survey allows us to better understand the geometry of the underlying Dammam Dome and its tectonic regime. The acquired data were processed using conventional gravity data reduction techniques. The effectiveness of terrain correction was evaluated using several recently developed algorithms. Afterward, processed data were subject to geophysical filters for edge detection (terracing transformation and horizontal gradient) and depth estimation (tilt derivative and 3D inversion). 3D Bouguer maps were generated and compared to the proposed geological models for the Dammam Dome. The results show the existence of ENE-WSW striking tectonic lines, where two nearly vertical, km long tectonic lines were predominant. The orientation of these tectonic lines defines an NNW-SSE trend for the least principal stress axis (σ3) and an ENE-WSW trend for the σ1σ2 stress plane of the driving stress regime, fitting well with the transtension stress regime recently suggested for the area. More importantly, the results of this study demonstrate that the Dammam Dome was affected by the intraplate stresses transferred from the convergence between the Arabian and Eurasian plates along the Zagros orogeny.

A new analysis of the intraplate stress regime and stress ratio in numerically modeled mantle convection

I propose a new analysis method for determining the intraplate stress in geodynamic models using a series of numerical simulations of mantle convection in 3D spherical-shell geometry. In the present study, the intraplate stress was evaluated from numerically obtained velocity and stress fields of mantle, and quantitatively classified into nine types by analyzing the principal deviatoric stress axes and the “stress ratio,” which is a continuous parameter accounting for the stress regimes. The sensitivity of model parameters and physical conditions associated with the basic characteristics of mantle convection, such as internal heating ratio, viscosity stratification, and temperature-dependent viscosity of the mantle as well as viscoplastic rheology that causes plate-like surface motion, on the intraplate stress regimes were studied. The results demonstrated that the radial viscosity structure of the mantle interior strongly affected intraplate stress regimes, and the combination of increased viscosity in the lower mantle and the low-viscosity asthenosphere enhanced the pure strike-slip faulting regime in the stable part of plate interiors. The temporally averaged toroidal-poloidal ratio (T/P ratio) at the top surface of mantle convection with surface plate-like motion and the mantle's viscosity stratification generally ranged ~20–40%, which is comparable to the observed T/P ratio of present-day and past Earth. Under such Earth-like surface conditions, normal faulting regime with strike-slip component or strike-slip regime with normal faulting component, as well as pure strike-slip faulting regime, were broadly found in the stable parts of the plate interiors. From the definition of the stress regime in the present study, strike-slip faults on the real Earth are likely to occur where the strike-slip faulting component is dominant in the present models. The analysis method proposed herein is effective for evaluating the intraplate stress in research target regions, for which observation data is insufficient to determine the intraplate stress.

Longest and still longer: The Messejana-Plasencia dyke and its links with later Alpine deformation belt in Iberia

The Messejana-Plasencia dyke (End-Triassic), NE-SW oriented, is the longest simple structure in Iberia (~500 km) and constitutes a first-order rheological discontinuity that crosses the entire crust. During the Alpine deformation, this discontinuity nucleated the Messejana-Plasencia left-lateral strike-slip fault and its related strike-slip deformation belt, consisting of a series of wide coalescent stepovers and small basins developed on the footwalls. Both structures can be followed from offshore of SW mainland Portugal to the central sector of the Spanish-Portuguese Central System. Using tectonic, geophysical, magnetic, and gravimetric analyses, our study demonstrated that it extends NE more than ~100 km below the continental sediments of the Duero Cenozoic Basin, until the Iberian Chain. We used a tectonostratigraphic analysis to determine the age of the wrench fault movement and that of the Spanish-Portuguese thrusts. In this range, the largest displacement during the Cenozoic occurred in the southern thrust of the Spanish sector of the Central System over the Madrid Cenozoic Basin, and NE-SW trending. This thrust displaces the Moho more than 10 km and probably joins the Messejana-Plasencia strike-slip fault at depth. The deduced age movement for both is Oligocene-Lower-Middle Miocene, related to the intraplate stresses transmitted from the Pyrenean orogen towards its foreland. A strain partitioning process was then deduced for the simultaneous movement of both main Alpine faults in Central Iberia.

Dynamics of the African Plate 75 Ma: From Plate Kinematic Reconstructions to Intraplate Paleo‐Stresses

AbstractPlate reconstruction studies show that the Neotethys Ocean was closing due to the convergence of Africa and Eurasia toward the end of the Cretaceous. The period around 75 Ma reflects the onset of continental collision between the two plates as convergence continued to be taken up mostly by subduction of the Neotethys slab beneath Eurasia. The Owen transform plate boundary in the northeast accommodated the fast northward motion of the Indian plate relative to the African plate. The rest of the plate was surrounded by mid‐ocean ridges. Africa was experiencing continent‐wide rifting related to northeast‐southwest extension. We aim to quantify the forces and paleostresses that may have driven this continental extension. We use the latest plate kinematic reconstructions in a grid search to estimate horizontal gravitational stresses (HGSs), plate boundary forces, and the plate's interaction with the asthenosphere. The contribution of dynamic topography to HGSs is based on recent mantle convection studies. We model intraplate stresses and compare them with the strain observations. The fit to observations favors models where dynamic topography amplitudes are smaller than 300 m. The results also indicate that the net pull transmitted from slab to the surface African plate was low. To put this into context, we notice that available tectonic reconstructions show fragmented subduction zones and various colliding micro‐continents along the northern margin of the African plate around this time. We therefore interpret a low net pull as resulting from either a small average slab length or from the micro‐continents' resistance to subduction.