Intraoral Device Research Articles

Management of anchor loss with the use of infrazygomatic implants – A case series

The mesial tipping of the first molar marks the onset of anchorage loss, and changes in the angulation of the first molar are closely related to anchorage loss. Despite the various treatment strategy, different patients show different tendencies towards anchorage loss, which influences the treatment results and must be managed. The quest for search for an ideal intraoral anchorage device has led orthodontists to micro-implants or temporary anchorage devices (TADs), which offer to solve one of the greatest dilemmas of “anchorage control. The use of miniscrews has been increased recently due to their ease of insertion and removal, reasonable cost, biocompatibility and capability to withstand orthodontic forces The introduction of the mini screw and infrazygomatic implant has provided orthodontists with a solution to the significant challenge of "anchorage control." This case series describes the successful management of anchor loss with the infrazygomatic implant(IZC) that occurred during premolar extraction space closure in a Class I and Class II malocclusion patients with severely proclined maxillary incisors.

Development of an open project rectangular collimator for use with intraoral dental X-ray unit.

In this work, an open beam-limiting device, consisting of a rectangular collimator to be coupled to an intraoral dental X-ray device, was made using recycled lead sheets as a radiation-absorbing element. The collimator was designed for 3D printing, and using Spektr 3.0 software, the number of lead sheets needed to absorb excess radiation was calculated. The rectangular collimator reduced the radiation dose to patients by 65% when using four layers of recycled lead sheets (saturating with a 70% reduction in radiation dose at the limit of eight or more sheets of lead). The rectangular collimator does not negatively impact the quality of the radiological image, is available as an open design for 3D printing, and can be built with materials that are easily accessible to the dentist, facilitating its use in clinical practice and reducing the patient's exposure to ionizing radiation.

Bite Force Mapping Based on Distributed Fiber Sensing Network Approach.

Bite force measurements are crucial in the realm of biomedical research, particularly in the areas of dentistry and orthodontic care. Various intraoral devices have been used to assess biting force, but each has limitations and drawbacks. Fiber optic sensors (FOSs) offer advantages such as electrical inertness, immunity to electromagnetic interference, and high sensitivity. Distributed fiber optic sensing allows an increase in the number of sensing points and can interrogate numerous reflections from scattering events within an optical fiber. We present four dental bites with heights of 6 mm, which enabled bilateral measurements. U-shaped sensors were prepared by embedding fibers into silicone by folding a single-mode fiber into four lines and multiplexing eight parallel nanoparticle-doped fibers. Dental bite models were created using two silicone materials (Sorta Clear 18 and Sorta Clear 40). The developed sensors were calibrated by applying weights up to 900 g, resulting in a linear response. Experiments were conducted to compare the efficacy of the dental bites. The collection of massive data was enabled by constructing a 2D map of the dental bites during multi-point sensing.

Statistical evaluation of tongue capability with visual feedback

BackgroundAnalysis of tongue movement would benefit from a reference showcasing healthy tongue capability. We aimed to develop a reference of tongue capability and evaluated the role of visual feedback on the expression of movement.MethodsUsing a wireless tracking intraoral wearable device, we composed probability distributions of the tongue tip as subjects were asked to explore the entire sensing surface area. Half of the 32 subjects received live visual feedback of the location of the center of the tongue tip contact.ResultsWe observed that the visual feedback group was 51.0% more consistent with each other in the position domain, explored 21.5% more sensing surface area, and was 50.7% more uniformly distributed. We found less consistent results when we evaluated velocity and acceleration.ConclusionVisual feedback best established a healthy capability reference which can be used for designing new interfaces, quantifying tongue ability, developing new diagnostic and rehabilitation techniques, and studying underlying mechanisms of tongue motor control.

Vertical alveolar ridge distraction using intraoral distraction device after ablative surgery for treatment of gingival squamous cell carcinoma in patient under chemotherapy: a case report

Background: Squamous cell carcinoma is a malignant epithelial neoplasm characterized by variable clinical manifestations. When located in the gingiva, this neoplasm may mimic common inflammatory lesions. This is a case report of gingival Squamous cell carcinoma treated by marginal mandibular resection and then, reconstruction by distraction osteogenesis during chemotherapy. Patient: In a 50-year-old female patient marginal resection was done for treatment of gingival Squamous Cell Carcinoma and an attempt was made to reconstruct the mandible using distraction osteogenesis during contaminant chemotherapy. Result: Reconstruction of the mandible using distraction osteogenesis was successful with no adverse effect of the chemotherapy on the bone for formation by the distraction. Both soft tissue and bone healing were uneventfully. Conclusion: This case indicates that DO and chemotherapy could be performed simultaneously with no complications.

Assessment of the pH value of the acid-base balance of
 the oral fluid in patients before the application of orthodontic
 devices, after three and six months of treatment
 with removable and non-removable equipment made of
 different materials

Hardware orthodontic treatment with intraoral devices
 made of various materials can contribute to the development
 of an imbalance of a number of chemical elements in the
 body, as well as their redistribution in the oral fluid. These
 changes affect the metabolic processes of both essential
 (vital) and toxic trace elements that can accumulate in the
 body, as well as affect the hydrogen pH of the oral fluid.
 Research objective. To investigate the hydrogen index of
 acid-base balance of oral fluid in patients before and during
 orthodontic treatment with various equipment in
 dynamics.

Efficacy of a novel three-step decontamination protocol for titanium-based dental implants: An invitro and invivo study.

The aim of the study was to evaluate several mechanical and chemical decontamination methods associated with a newly introduced biofilm matrix disruption strategy for biofilm cleaning and preservation of implant surface features. Titanium (Ti) discs were obtained by additive manufacturing. Polymicrobial biofilm-covered Ti disc surfaces were decontaminated with mechanical [Ti curette, Teflon curette, Ti brush, water-air jet device, and Er:YAG laser] or chemical [iodopovidone (PVPI) 0.2% to disrupt the extracellular matrix, along with amoxicillin; minocycline; tetracycline; H2 O2 3%; chlorhexidine 0.2%; NaOCl 0.95%; hydrocarbon-oxo-borate-based antiseptic] protocols. The optimal invitro mechanical/chemical protocol was then tested in combination using an invivo biofilm model with intra-oral devices. Er:YAG laser treatment displayed optimum surface cleaning by biofilm removal with minimal deleterious damage to the surface, smaller Ti release, good corrosion stability, and improved fibroblast readhesion. NaOCl 0.95% was the most promising agent to reduce invitro and invivo biofilms and was even more effective when associated with PVPI 0.2% as a pre-treatment to disrupt the biofilm matrix. The combination of Er:YAG laser followed by PVPI 0.2% plus NaOCl 0.95% promoted efficient decontamination of rough Ti surfaces by disrupting the biofilm matrix and killing remnants of invivo biofilms formed in the mouth (the only protocol to lead to ~99% biofilm eradication). Er:YAG laser + PVPI 0.2% + NaOCl 0.95% can be a reliable decontamination protocol for Ti surfaces, eliminating microbial biofilms without damaging the implant surface.

Temporomandibular disorders, occlusal splints, and treatment options: a survey-based investigation

Background: The term "temporomandibular disorders" (TMDs) refers to a group of painful conditions that affect both the hard and soft orofacial anatomical structures. The primary objectives of TMD treatment are to lessen pain and enhance mandibular movements, re-establishing proper functioning. One of the widely used treatment options for TMDs pathology is the occlusal splint. This non-invasive intraoral device, determines both the muscle relaxation and reversibly repositions the temporomandibular joint structures. The study aimed to compare the efficacy of different occlusal splint designs or materials in managing TMD symptoms. Methods: Twenty-six patients, nineteen of whom were female and seven of whom were male, ranging in age from twenty to seventy, met the criteria needed participate in this study. Two different questionnaires were formulated: a patient-focused and a clinician-focused questionnaire. The patient's data encompassed general health status and TMD signs and symptoms, whereas the clinician's questions addressed assessment and treatment alternatives, including the particularities of occlusal splint therapy. Results: The majority of the patients were diagnosed with disc displacement with reduction (61.5%), followed by myalgia (26.9%). The only form of treatment preferred by physicians was the Michigan occlusal splint, which was mainly used on the maxillary dental arch (84,6%). After the splint therapy was completed and the intended results were obtained, the treatment plan was finished using selective grinding, prosthetic dental restorations, orthodontic therapy, or a combination of these procedures. The patient was required to continue physical therapy (7,7%), wear a full-arch night guard (42.3%), and undergo rigorous periodic control sessions (34.6%) to maintain the final aesthetic and functional results. Conclusions: Occlusal splints are an efficient and reliable initial therapy preference for patients with temporomandibular disorders. In addition to improving symptoms in the temporomandibular joint, occlusal splints may determine mandibular repositioning, which also implies a variety of treatment approaches, ranging from the minimally invasive to the most complex, to achieve a functional occlusal status.

Use of mouthguards in Latin American field hockey athletes during the ODESUR 2022 Games.

Athletes are susceptible to oral injuries. To reduce the incidence and severity of oral trauma, a custom-made mouthguard, a device positioned in the mouth to prevent damage to teeth and surrounding structures, is recommended. In field hockey, according to the international rules of this sport, using mouthguards is not mandatory, but it is recommended to wear them at all times while practicing this discipline. We aimed to determine characteristics and differences regarding mouthguard usage among field hockey players from different countries participating in the XII ODESUR Games. We conducted a cross-sectional study that included 78 voluntary hockey athletes that met the inclusion criteria. The questionnaire used was validated by Panam Sports, collecting information on the type of mouthguard (custom-made or prefabricated), and the time of use of the mouthguard (range of 5 years). Of the total number of athletes, 96% used mouthguards, of which 64% were custom-made type, and 32% were prefabricated (p < .001). Custom-made mouthguards were used by 100%, 89%, and 64% of athletes in Argentina, Chile, and Peru, respectively, while only 40% of athletes in Paraguay and Uruguay used them. It has also been observed that more than 50% of the individuals have not controlled and replaced their intraoral devices for more than 10 years. Our results reveal a problem with a public health dimension and thus invite the standardization of guidelines with an educational approach to promoting and adopting good sports practices. This report is the first on using mouthguards in high-performance athletes during an international multisport event.

Compression-distraction devices in the treatment of congenital disorders in children. Case series

Relevance. In many cases, Pierre Robin sequence and congenital micrognathia lead to respiratory failure, obstructive sleep apnea, and aspiration of food due to swallowing problems. Compression-distraction osteogenesis method allowed for the effective achievement of a stable clinical result with the minimum losses for the child's body.Purpose. The study aimed to conduct a retrospective analysis of various types of compression-distraction devices based on the Department of Maxillofacial Surgery of the Republican Children's Clinical Hospital.Material and Methods. Since 2010, 36 children aged three months to 13 years have been operated, 20 boys and 16 girls. Four children were operated using an multi-vector external compression-distraction device. Two children with Pierre Robin sequence had surgery with a Conmet intraoral compression-distraction device, 27 children – with a KLS Martin bone-borne compression-distraction device, of which 15 had Pierre Robin sequence, and 12 had congenital lower micrognathia. Seven children had tracheostomy, which had been placed due to permanent sleep apnea.Results. Three (8.33%) children were operated using external compression-distraction devices. From three months to one year. A patient with Pierre Robin sequence, tracheostomy, and cannula. A tracheostomy was installed at the age of 15 days due to persistent apnea. At three months of age, bilateral osteotomy of the mandible with the installation of an external compression-distraction device was performed. Compression was for three days; then, they began distraction of one mm/day for 15 days. Five months later, the child began to breathe freely through the natural respiratory tract; under mask anesthesia, the compression-distraction device was removed. Four children (11.11%) aged 8 to 12 months were operated using multi-vector external compression-distraction device. A patient aged one year with Pierre Robin sequence, tracheostomy, and cannula. The external compression-distraction device was installed at the age of eight months. The distraction period was 12 days. The consolidation period was three months. The treatment result was independent breathing through the natural respiratory tract. The tracheostomy cannula was removed. Twenty-nine children 2 (5.56%) were operated using intraoral bone-borne compressiondistraction devices. A child aged 14 months, diagnosed with Pierre Robin sequence, complained of periodic sleep apnea with signs of acrocyanosis. Moderate to severe obstructive sleep apnea was detected. A bilateral osteotomy of the mandible was performed, and a bone-borne compression-distraction device was installed. Compression was for three days, then the distraction of 0.5 mm twice a day – for 14 days. Distraction was performed at 14 mm. After five months, the bone-borne CDD was removed, and polysomnography was repeated. The apnea-hypopnea index (AHI) was &lt;5. Respiratory function was fully restored.Conclusion. Thus, 24 children showed successful results with the use of compression-distraction device (an orthognathic occlusion was formed, glossoptosis was eliminated, natural breathing and feeding were restored); 11 children did not have a satisfactory result (due to distraction interruption, it was not possible to achieve a physiological bite, there was postoperative wound suppuration with wound dehiscence). There was one negative result due to trauma: the child fell on his chin at home during the consolidation period, and the compression-distraction device broke, which resulted in disocclusion.

The Effect of TMJ Intervention on Instant Postural Changes and Dystonic Contractions in Patients Diagnosed with Dystonia: A Pilot Study.

(1) Background: The aim of the present study is to analyze the instant postural changes and changes in the dystonic contractions among patients with dystonia following the use of an intraoral device called a key integrative dynamic TMJ treatment appliance (KIDTA). (2) Methods: Twelve subjects, previously diagnosed with dystonia were enrolled. Their existing records were utilized to assess the changes in their posture and dystonic contractions. The posture analysis was conducted using a mobile application (APECS). The initial records (T0) and records acquired after the delivery of the KIDTA (T1) were utilized in the analysis. The Wilcoxon signed-rank test was performed to compare parameters between T0 and T1, with a significance level set at p < 0.05. (3) Results: Based on the Wilcoxon signed-rank test, statistically significant differences in T1 compared to T0 were observed in the severity of dystonic spasms, body alignment, head shift, head tilt, shoulder alignment, shoulder angle, axillae alignment, ribcage tilt, pelvic tilt, knee angle, and tibia angle (p < 0.05). (4) Conclusions: Within the limitations of the present pilot study, an intervention to the TMJ through a KIDTA appliance seems to mitigate the severity of dystonic contractions and improve the posture with respect to certain postural parameters.

Antibiofilm and antimicrobial activity of temporary filling materials on root canals: an in situ acid challenge.

The present study evaluated the antibiofilm and antimicrobial effects of temporary restorative materials on root canals after an intra-oral challenge. Seventy roots were endodontically treated and divided into 5 groups: high-viscosity glass ionomer (HV-GIC), light-activated glass ionomer (RM-GIC), zinc-oxide cement without eugenol (ZO), zinc-oxide cement with eugenol (ZOE), and unsealed roots (negative control). For 28 days, 14 participants used intra-oral devices with five roots, and drops of sucrose were applied onto them. The amount of biofilm and the bacterial counts were analyzed by Kruskal-Wallis and Dunn, and by two-way ANOVA and Tukey (α = 0.05). HV-GIC and RM-GIC better inhibit biofilm, followed by ZO and ZOE. Unsealed roots had the largest biofilm accumulation (p = 0.002) and higher bacterial penetration than restored roots (p = 0.023). A low amount of Streptococcus was found in RM-GIC and ZOE-restored roots without difference from HV-GIC (p = 0.021). The low amount of Enterococcus (p = 0.003) was found in the ZOE-restored roots, without difference from GICs.

Clinical assessment of a low-cost, hand-held, smartphone-attached intraoral imaging probe for 5-aminolevulinic acid photodynamic therapy monitoring and guidance.

India has one of the highest rates of oral squamous cell carcinoma (OSCC) in the world, with an incidence of 15 per 100,000 and more than 70,000 deaths per year. The problem is exacerbated by a lack of medical infrastructure and routine screening, especially in rural areas. New technologies for oral cancer detection and timely treatment at the point of care are urgently needed. Our study aimed to use a hand-held smartphone-coupled intraoral imaging device, previously investigated for autofluorescence (auto-FL) diagnostics adapted here for treatment guidance and monitoring photodynamic therapy (PDT) using 5-aminolevulinic acid (ALA)-induced protoporphyrin IX (PpIX) fluorescence (FL). A total of 12 patients with 14 buccal mucosal lesions having moderately/well-differentiated micro-invasive OSCC lesions ( diameter and depth) were systemically (in oral solution) administered three doses of ALA (total ). Lesion site PpIX and auto-FL were imaged using the multichannel FL and polarized white-light oral cancer imaging probe before/after ALA administration and after light delivery (fractionated, total of 635nm red LED light). The handheld device was conducive for access to lesion site images in the oral cavity. Segmentation of ratiometric images in which PpIX FL is mapped relative to auto-FL enabled improved demarcation of lesion boundaries relative to PpIX alone. A relative FL (-value) threshold of 1.4 was found to segment lesion site PpIX production among the patients with mild to severe dysplasia malignancy. The segmented lesion size is well correlated with ultrasound findings. Lesions for which -value was at the time of treatment were associated with successful outcomes. These results indicate the utility of a low-cost, handheld intraoral imaging probe for image-guided PDT and treatment monitoring while also laying the groundwork for an integrated approach, combining cancer screening and treatment with the same hardware.

Colour Parameters and Changes of Tea-Stained Resin Composite Exposed to Whitening Pen (In Vitro Study).

One of the crucial factors influencing the longevity of anterior aesthetic dental restorations is the colour stability of resin composites. Bleaching and whitening have become popular methods for enhancing dental aesthetics. Home whitening techniques, such as special pens, are widely available commercially. This in vitro study aimed to determine the efficiency of a whitening pen in removing tea stains from resin composite by measuring colour differences (ΔE00). Additionally, the study aimed to evaluate the variations in colour parameters measured by extra-oral and intra-oral spectrophotometers. A total of 45 disc-shaped resin composite specimens were randomly divided into three groups; Group 1: stored in artificial saliva (control), Group 2: stored in artificial saliva followed by a whitening pen application, and Group 3: stored in tea followed by a whitening pen application. Colour measurements were taken three times for each specimen using two spectrophotometers (extra-oral and intra-oral devices); T1: before storage (baseline), T2: after storage in artificial saliva or tea for 6 days; and T3: after one week of whitening pen application in groups 2 and 3. The data were statistically analyzed using one-way ANOVA followed by the Tukey post hoc test (p ≤ 0.05). The independent sample t-test was also employed. The equation of CIEDE2000 (ΔE00) was used to calculate the colour difference between the dry, as-prepared specimens (baseline), and those after storage or bleaching. The colour changes exceeding the acceptability threshold (∆E00 = 1.8) were considered unacceptable. After whitening, the colour of the specimens stored in brewed tea (Group 3) remained unacceptable, as indicated by both the extra-oral and intra-oral spectrophotometers (ΔE00 = 4 and 2.9, respectively). Groups 1 and 2 exhibited lower ΔE00 values than Group 3 (p = 0.01 *). No significant difference was observed between Group 1 (stored in artificial saliva) and Group 2 (stored in artificial saliva and then bleached) (p = 0.3). Significant differences were consistently observed between the data obtained from the extra-oral spectrophotometer and the intra-oral one. The whitening pen proved ineffective in removing tea stains from resin composites. Although significant differences were found between the values obtained by the two spectrophotometers (extra-oral and intra-oral), both devices confirmed the unacceptable colour of the tea-stained resin composites after whitening.

Treatment of Maxillary Deficiency with Reverse Chin Cup: A Case Report

Introduction: This case report aims to illustrate the dentoalveolar changes of a 13-year-old class III patient with maxillary deficiency treated with a Reverse Chin Cup appliance.one of the popular appliances for treating class III patients with deficient maxilla is facemask. In class III growing patients, treatment options include extraoral and intraoral devices. chin and forehead are used for extraoral anchorage supports. Case Presentation: The patient is a 13-year-old girl with a mild maxillary deficiency. She had an Angle Class III molar relationship. She refused to use a face mask due to its highly bulky size. The Reverse Chin Cup is attached to a removable appliance in the upper jaw, with Adams clasps on the first molars, the first premolars, and C-clasps on the upper central and lateral incisors for additional anchorage. Results: After the sixth month of treatment with a chin cup, SNA increased by 2°, and a positive overjet was achieved. Conclusion: This case demonstrates that the reverse chin cup appliance is a suitable alternative to facemasks in class III and maxillary deficient cases.

Intraoral NIR Device for Radiation Induced Oral Mucositis – Design and Development

Intraoral NIR Device for Radiation Induced Oral Mucositis – Design and Development

Material extrusion of thermoplastic acrylic for intraoral devices: Technical feasibility and evaluation

With global demand for 3D printed medical devices on the rise, the search for safer, inexpensive, and sustainable methods is timely. Herein, we assessed the practicality of the material extrusion process for acrylic denture bases of which successful outcomes can be extended to implant surgical guides, orthodontic splints, impression trays, record bases and obturators for cleft palates or other maxillary defects. Representative materials comprising denture prototypes and test samples were designed and built with in-house polymethylmethacrylate filaments using varying print directions (PDs), layer heights (LHs) and reinforcements (RFs) with short glass fiber. The study undertook a comprehensive evaluation of the materials to determine their flexural, fracture, and thermal properties. Additional analyses for tensile and compressive properties, chemical composition, residual monomer, and surface roughness (Ra) were completed for parts with optimum parameters. Micrographic analysis of the acrylic composites revealed adequate fiber-matrix compatibility and predictably, their mechanical properties improved simultaneously with RFs and decreased LHs. Fiber reinforcement also improved the overall thermal conductivity of the materials. Ra, on the other hand, improved visibly with decreased RFs and LHs and the prototypes were effortlessly polished and characterized with veneering composites to mimic gingival tissues. In terms of chemical stability, the residual methyl methacrylate monomer contents are well below standards threshold for biological reactions. Notably, 5 vol% acrylic composites built with 0.05 mm LH in 0° on z-axis produced optimum properties that are superior to those of conventional acrylic, milled acrylic and 3D printed photopolymers. Finite element modeling successfully replicated the tensile properties of the prototypes. It may well be argued that the material extrusion process is cost-effective; however, the speed of manufacturing could be longer than that of established methods. Although the mean Ra is within an acceptable range, mandatory manual finishing and aesthetic pigmentation are required for long-term intraoral use. At a proof-of-concept level, it is evident that the material extrusion process can be applied to build inexpensive, safe, and robust thermoplastic acrylic devices. The broad outcomes of this novel study are equally worthy of academic reflection, and further translation to the clinic.

Effect of different disinfection protocols in bacterial viability of an intraradicular biofilm formed in situ.

The present study aimed to evaluate bacterial viability after the use of different disinfection protocols in root canals infected with a multispecies biofilm (MB) formed in situ. Palatal roots with a single canal were obtained from extracted maxillary molars and sterilized before being inserted into the mouth. The roots were contaminated with a MB in an intraoral appliance worn by ten volunteers. All volunteers wore six roots simultaneously in two intraoral devices for 21 days. One root from each volunteer was assigned to each group (n=10): PUI - passive ultrasonic irrigation; EC - Easy Clean; XPF - XP-endo Finisher; aPDT - antimicrobial photodynamic therapy; CI - conventional irrigation; and NC - negative control. The samples were evaluated under confocal laser scanning microscopy. The percentage of viable cells (VC) was calculated over the total percentage of MB biovolume. Data were statistically analyzed (α=5%). The cell viability in the entire root canal or for each third was compared between groups (Kruskal-Wallis test, Dunn post-hoc test) and for the same group (Friedman test, Dunn post-hoc test). Disinfection protocols were not significantly different from each other (P>.05). Samples in EC, PUI, and aPDT had lower cell viability than in NC (P<.05). In the coronal third of samples in the EC, XPF, PUI and aPDT, the percentage of VC biovolume was lower than in the NC (P<.05). The percentage of VC in EC samples was lower in the coronal and middle thirds than in the apical third (P<.05). EC, PUI and aPDT had significant effects on cell viability in intraradicular multispecies biofilm formed in situ when compared with untreated samples.

The Effects of Respiratory Muscle Functions on Trunk Muscle Endurance in Healthy Young Adults

Purpose: Respiratory muscles play a dual role in breathing and trunk stability during activities. The relationship between respiratory muscle functions and trunk stability has not yet been clarified. The aim of the study was to examine the effects of respiratory muscle functions on trunk muscle endurance in healthy young adults.&#x0D; &#x0D; Methods: McGill's trunk muscle endurance tests, which consist of trunk flexion endurance test (FE), Sorensen test (ST) and Side Bridge test (SB), were used to evaluate the participants' trunk muscle endurance. Respiratory muscle strength was evaluated by measuring intraoral maximal inspiratory and expiratory pressures using an intraoral pressure meter device. The respiratory muscle endurance test was performed with the incremental threshold load protocol using a threshold IMT device.&#x0D; &#x0D; Results: A total of 51 healthy young adults, with a mean age of 21.8 ± 3.2 years, were evaluated. The results of the linear regression models were significantly explained 46% of the variance in the SB and 38% in the FE, (for SB Adj R2=0.46, F=21.40, p&lt; 0.001 and for FE Adj R2=0.38, F=15.65, p&lt; 0.001). Respiratory muscle endurance contributed 30% to the endurance of the trunk flexor muscles, while respiratory muscle strength contributed only 8%. Similarly, respiratory muscle endurance contributed 38% to the endurance of the trunk lateral flexor muscles, while respiratory muscle strength contributed only 8%.&#x0D; &#x0D; Conclusion: Although respiratory muscle strength and respiratory muscle endurance were independent contributors to trunk muscle endurance, respiratory muscle endurance more affected trunk muscle endurance than respiratory muscle strength in healthy young adults.

Anterior Maxillary Distraction Osteogenesis With Bone-borne Intraoral Buccal Devices for Maxillary Hypoplasia With Cleft Lip and Palate.

Anterior maxillary distraction osteogenesis (AMDO) surgery for cleft lip and palate involves distraction of a segment of the anterior maxilla and advancement using 2 intraoral buccal bone-borne distraction devices. The anterior part of the maxilla is advanced anteriorly with less relapse which increases maxillary length and does not affect speech. We aimed to evaluate the effects of AMDO, including lateral cephalometric changes. Seventeen patients who had undergone this procedure were included in this retrospective study. The distractors were activated by 0.5mm twice a day after a 3-day latency period. Lateral cephalometric radiographs were evaluated preoperatively, after distraction and removal of distractors, which were compared using the paired Student's t test. Anterior maxillary advancement was obtained in all patients with a median of 8.0mm. Complications included nasal bleeding and loosening of distractors; however, there was no tooth damage or abnormal movement. The mean sella-nasion-A point (SNA) angle increased significantly, from 74.91° to 79.66°, the A point-nasion-B point angle from -0.38° to 4.34°, and the perpendicular line from nasion to Frankfort Horizontal (NV)-A point from -5.11 to 0.08mm. The mean anterior nasal spine-posterior nasal spine length increased significantly from 50.74 to 55.10mm, and the NV-Nose Tip from 23.59 to 26.27mm. The mean relapse rate of NV-A was 11.1%. AMDO with bone-borne distractor resulted in less relapse and effectively corrected the maxillary retrusion.