Intramolecular Ligation Research Articles

Inverse Polymerase Chain Reaction (PCR).

The standard polymerase chain reaction (PCR) is used to amplify a segment of DNA that lies between two inward-pointing primers. In contrast, inverse PCR (also known as inverted or inside-out PCR) is used to amplify DNA sequences that flank one end of a known DNA sequence and for which no primers are available. Inverse PCR DNA involves digestion by a restriction enzyme of a preparation of DNA containing the known sequence and its flanking region. The individual restriction fragments (many thousands in the case of total mammalian genomic DNA) are converted into circles by intramolecular ligation, and the circularized DNA is then used as a template in PCR. The unknown sequence is amplified by two primers that bind specifically to the known sequence and point in opposite directions. The product of the amplification reaction is a linear DNA fragment containing a single site for the restriction enzyme originally used to digest the DNA. This site marks the junction between the previously cloned sequence and the flanking sequences. The size of the amplified fragment depends on the distribution of restriction sites within known and flanking DNA sequences.

Ribosomal Synthesis of Backbone-Cyclic Peptides Compatible with In Vitro Display.

Backbone-cyclic peptides are an attractive class for therapeutic development. However, in vitro display technologies coupled with ribosomal synthesis are intrinsically inapplicable to such "phenotypes" because of loss of the C-terminal peptide region linking to "genotype". Here, we report a methodology enabling the display of backbone-cyclic peptides. To achieve this, genetic code reprogramming was utilized to implement a rearrangement strategy involving the ribosomal incorporation of a designer initiator containing a thiazolidine-protected cysteine and 2-chloroacetoamide (ClAc) side chain, followed by an α-thio acid and cysteine at downstream positions. Upon expression of the linear peptide, spontaneous thioester rearrangement occurs between the α-thioester and the thiol group of the cysteine, liberating the α-thio group and resulting in cross-linking to the upstream ClAc side-chain group. Then selective deprotection of the thiazolidine-protected cysteine immediately promotes intramolecular native chemical ligation, as demonstrated for various sequences and ring sizes. In this approach, the backbone-cyclic peptides retain their C-terminal peptide regions via the side-chain thioether covalent linkage, making them compatible with in vitro display.

Restricted rotation of an Fe(CO)2(PL3)-subunit in [FeFe]-hydrogenase active site mimics by intramolecular ligation.

A new series of homodinuclear iron complexes as models of the [FeFe]-hydrogenase active site was prepared and characterized. The complexes of the general formula [Fe2(mcbdt)(CO)5PPh2R] (mcbdt = benzene-1,2-dithiol-3-carboxylic acid) feature covalent tethers that link the mcbdt ligand with the phosphine ligands which are terminally coordinated to one of the Fe centres. The synthetic feasability of the concept is demonstrated with the preparation of three novel complexes. A detailed theoretical investigation showes that by introducing a rigid covalent link between the phosphine and the bridging dithiolate ligands, the rotation of the Fe(CO)2P unit is hindered and higher rotation barriers were calculated compared to non-linked reference complexes. The concept of restricting Fe(L)3 rotation is an approach to kinetically stabilize terminal hydrides which are reactive intermediates in catalytic proton reduction cycles of the enzymes.

Chemoenzymatic Synthesis of Linear- and Head-to-Tail Cyclic Peptides Using Omniligase-1.

Omniligase-1-catalyzed ligation represents a powerful tool for the efficient intermolecular and intramolecular (head-to-tail cyclization) ligation of peptides. Reactions are irreversible and proceed with unprotected peptides (μM-mMconcentration) in aqueous solution at slightly basic pH. Due to its high catalytic efficiency, only very low molar equivalents of omniligase-1 are required. In this chapter, a chemoenzymatic peptide synthesis (CEPS) approach for the assembly of medium-to-long-sized linear peptides as well as for efficient peptide head-to-tail cyclization is described. In particular, we provide protocols for the chemoenzymatic synthesis of the peptide therapeutic exenatide, a GLP-1 (glucagon-like peptide) analogue, and the macrocyclization and oxidative folding of the cyclotide MCoTI-II in a one-pot procedure.

Bacterial Cell-Surface Display of Semisynthetic Cyclic Peptides.

Semisynthetic cyclic peptides containing both non-proteinogenic building blocks, as the synthetic part, and a genetically encoded sequence amenable to DNA-based randomization hold great potential to expand the chemical space in the quest for novel bioactive peptides. Key to an efficient selection of novel binders to biomacromolecules is a robust method to link their genotype and phenotype. A novel bacterial cell surface display technology has been developed to present cyclic peptides composed of synthetic and genetically encoded fragments in their backbones. The fragments were combined by protein trans-splicing and intramolecular oxime ligation. To this end, a split intein half and an unnatural amino acid were displayed with the genetically encoded part on the surface of Escherichia coli. Addition of the synthetic fragment equipped with the split intein partner and an aminooxy moiety, as well as the application of a pH-shift protocol, resulted in the onsurface formation of the semisynthetic cyclic peptide. This approach will serve for the generation of cyclic peptide libraries suitable for selection by fluorescence-activated cell sorting, and more generally enables chemical modification of proteins on the bacterial surface.

Accelerated microfluidic native chemical ligation at difficult amino acids toward cyclic peptides

Cyclic peptide-based therapeutics have a promising growth forecast that justifies the development of microfluidic systems dedicated to their production, in phase with the actual transitioning toward continuous flow and microfluidic technologies for pharmaceutical production. The application of the most popular method for peptide cyclization in water, i.e., native chemical ligation, under microfluidic conditions is still unexplored. Herein, we report a general strategy for fast and efficient peptide cyclization using native chemical ligation under homogeneous microfluidic conditions. The strategy relies on a multistep sequence that concatenates the formation of highly reactive S-(2-((2-sulfanylethyl)amino)ethyl) peptidyl thioesters from stable peptide amide precursors with an intramolecular ligation step. With very fast ligation rates (<5 min), even for the most difficult junctions (including threonine, valine, isoleucine, or proline), this technology opens the door toward the scale-independent, expedient preparation of bioactive macrocyclic peptides.

Molecular basis for the production of cyclic peptides by plant asparaginyl endopeptidases

Asparaginyl endopeptidases (AEPs) are proteases that have crucial roles in plant defense and seed storage protein maturation. Select plant AEPs, however, do not function as proteases but as transpeptidases (ligases) catalyzing the intra-molecular ligation of peptide termini, which leads to peptide cyclization. These ligase-type AEPs have potential biotechnological applications ranging from in vitro peptide engineering to plant molecular farming, but the structural features enabling these enzymes to catalyze peptide ligation/cyclization rather than proteolysis are currently unknown. Here, we compare the sequences, structures, and functions of diverse plant AEPs by combining molecular modeling, sequence space analysis, and functional testing in planta. We find that changes within the substrate-binding pocket and an adjacent loop, here named the “marker of ligase activity”, together play a key role for AEP ligase efficiency. Identification of these structural determinants may facilitate the discovery of more ligase-type AEPs and the engineering of AEPs with tailored catalytic properties.

High-throughput sequencing reveals circular substrates for an archaeal RNA ligase

ABSTRACTIt is only recently that the abundant presence of circular RNAs (circRNAs) in all kingdoms of Life, including the hyperthermophilic archaeon Pyrococcus abyssi, has emerged. This led us to investigate the physiologic significance of a previously observed weak intramolecular ligation activity of Pab1020 RNA ligase. Here we demonstrate that this enzyme, despite sharing significant sequence similarity with DNA ligases, is indeed an RNA-specific polynucleotide ligase efficiently acting on physiologically significant substrates. Using a combination of RNA immunoprecipitation assays and RNA-seq, our genome-wide studies revealed 133 individual circRNA loci in P. abyssi. The large majority of these loci interacted with Pab1020 in cells and circularization of selected C/D Box and 5S rRNA transcripts was confirmed biochemically. Altogether these studies revealed that Pab1020 is required for RNA circularization. Our results further suggest the functional speciation of an ancestral NTase domain and/or DNA ligase toward RNA ligase activity and prompt for further characterization of the widespread functions of circular RNAs in prokaryotes. Detailed insight into the cellular substrates of Pab1020 may facilitate the development of new biotechnological applications e.g. in ligation of preadenylated adaptors to RNA molecules.

Efficient synthesis of cysteine-rich cyclic peptides through intramolecular native chemical ligation of N-Hnb-Cys peptide crypto-thioesters.

We herein introduce a straightforward synthetic route to cysteine-containing cyclic peptides based on the intramolecular native chemical ligation of in situ generated thioesters. Key precursors are N-Hnb-Cys crypto-thioesters, easily synthesized by Fmoc-based SPPS. The strategy is applied to a representative range of naturally occurring cyclic disulfide-rich peptide sequences.

Synthesis of Circular DNA Templates with T4 RNA Ligase for Rolling Circle Amplification

Currently, isothermal methods of nucleic acid amplification have been well established; in particular, rolling circle amplification is of great interest. In this approach, circular ssDNA molecules have been used as a target that can be obtained by the intramolecular template-dependent ligation of an oligonucleotide C-probe. Here, a new method of synthesizing small circular DNA molecules via the cyclization of ssDNA based on T4 RNA ligase has been proposed. Circular ssDNA is further used as the template for the rolling circle amplification. The maximum yield of the cyclization products was observed in the presence of 5-10% polyethylene glycol 4000, and the optimum DNA length for the cyclization constituted 50 nucleotides. This highly sensitive method was shown to detect less than 10^(2) circular DNA molecules. The method reliability was proved based on artificially destroyed dsDNA, which suggests its implementation for analyzing any significantly fragmented dsDNA.

Structural and mutational analysis of archaeal ATP-dependent RNA ligase identifies amino acids required for RNA binding and catalysis.

An ATP-dependent RNA ligase from Methanobacterium thermoautotrophicum (MthRnl) catalyzes intramolecular ligation of single-stranded RNA to form a closed circular RNA via covalent ligase-AMP and RNA-adenylylate intermediate. Here, we report the X-ray crystal structures of an MthRnl•ATP complex as well as the covalent MthRnl–AMP intermediate. We also performed structure-guided mutational analysis to survey the functions of 36 residues in three component steps of the ligation pathway including ligase-adenylylation (step 1), RNA adenylylation (step 2) and phosphodiester bond synthesis (step 3). Kinetic analysis underscored the importance of motif 1a loop structure in promoting phosphodiester bond synthesis. Alanine substitutions of Thr117 or Arg118 favor the reverse step 2 reaction to deadenylate the 5′-AMP from the RNA-adenylate, thereby inhibiting step 3 reaction. Tyr159, Phe281 and Glu285, which are conserved among archaeal ATP-dependent RNA ligases and are situated on the surface of the enzyme, are required for RNA binding. We propose an RNA binding interface of the MthRnl based on the mutational studies and two sulfate ions that co-crystallized at the active site cleft in the MthRnl–AMP complex.

Identification of the dominant photochemical pathways and mechanistic insights to the ultrafast ligand exchange of Fe(CO)5 to Fe(CO)4EtOH.

We utilized femtosecond time-resolved resonant inelastic X-ray scattering and ab initio theory to study the transient electronic structure and the photoinduced molecular dynamics of a model metal carbonyl photocatalyst Fe(CO)5 in ethanol solution. We propose mechanistic explanation for the parallel ultrafast intra-molecular spin crossover and ligation of the Fe(CO)4 which are observed following a charge transfer photoexcitation of Fe(CO)5 as reported in our previous study [Wernet et al., Nature 520, 78 (2015)]. We find that branching of the reaction pathway likely happens in the 1A1 state of Fe(CO)4. A sub-picosecond time constant of the spin crossover from 1B2 to 3B2 is rationalized by the proposed 1B2 → 1A1 → 3B2 mechanism. Ultrafast ligation of the 1B2 Fe(CO)4 state is significantly faster than the spin-forbidden and diffusion limited ligation process occurring from the 3B2 Fe(CO)4 ground state that has been observed in the previous studies. We propose that the ultrafast ligation occurs via 1B2 → 1A1 → 1A′ Fe(CO)4EtOH pathway and the time scale of the 1A1 Fe(CO)4 state ligation is governed by the solute-solvent collision frequency. Our study emphasizes the importance of understanding the interaction of molecular excited states with the surrounding environment to explain the relaxation pathways of photoexcited metal carbonyls in solution.

Circular DNA by "Bis-Click" Ligation: Template-Independent Intramolecular Circularization of Oligonucleotides with Terminal Alkynyl Groups Utilizing Bifunctional Azides.

A highly effective and convenient "bis-click" strategy was developed for the template-independent circularization of single-stranded oligonucleotides by employing copper(I)-assisted azide-alkyne cycloaddition. Terminal triple bonds were incorporated at both ends of linear oligonucleotides. Alkynylated 7-deaza-2'-deoxyadenosine and 2'-deoxyuridine residues with different side chains were used in solid-phase synthesis with phosphoramidite chemistry. The bis-click ligation of linear 9- to 36-mer oligonucleotides with 1,4-bis(azidomethyl)benzene afforded circular DNA in a simple and selective way; azido modification of the oligonucleotide was not necessary. Short ethynyl side chains were compatible with the circularization of longer oligonucleotides, whereas octadiynyl residues were used for short 9-mers. Compared with linear duplexes, circular bis-click constructs exhibit a significantly increased duplex stability over their linear counterparts. The intramolecular bis-click ligation protocol is not limited to DNA, but may also be suitable for the construction of other macrocycles, such as circular RNAs, peptides, or polysaccharides.

Transforming conotoxins into cyclotides: Backbone cyclization of P-superfamily conotoxins.

Peptide backbone cyclization is a widely used approach to improve the activity and stability of small peptides but until recently it had not been applied to peptides with multiple disulfide bonds. Conotoxins are disulfide-rich conopeptides derived from the venoms of cone snails that have applications in drug design and development. However, because of their peptidic nature, they can suffer from poor bioavailability and poor stability in vivo. In this study two P-superfamily conotoxins, gm9a and bru9a, were backbone cyclized by joining the N- and C-termini with short peptide linkers using intramolecular native chemical ligation chemistry. The cyclized derivatives had conformations similar to the native peptides showing that backbone cyclization can be applied to three disulfide-bonded peptides with cystine knot motifs. Cyclic gm9a was more potent at high voltage-activated (HVA) calcium channels than its acyclic counterpart, highlighting the value of this approach in developing active and stable conotoxins containing cyclic cystine knot motifs.

Efficient production of superior dumbbell-shaped DNA minimal vectors for small hairpin RNA expression.

Genetic therapy holds great promise for the treatment of inherited or acquired genetic diseases; however, its breakthrough is hampered by the lack of suitable gene delivery systems. Dumbbell-shaped DNA minimal vectors represent an attractive, safe alternative to the commonly used viral vectors which are fraught with risk, but dumbbell generation appears to be costly and time-consuming. We developed a new PCR-based method for dumbbell production which comprises only two steps. First, PCR amplification of the therapeutic expression cassette using chemically modified primers to form a ready-to-ligate DNA structure; and second, a highly efficient intramolecular ligation reaction. Compared with conventional strategies, the new method produces dumbbell vectors more rapidly, with higher yields and purity, and at lower costs. In addition, such produced small hairpin RNA expressing dumbbells triggered superior target gene knockdown compared with conventionally produced dumbbells or plasmids. Our novel method is suitable for large-scale dumbbell production and can facilitate clinical applications of this vector system.

Changing the topology of protein backbone: the effect of backbone cyclization on the structure and dynamics of a SH3 domain.

Understanding of the effects of the backbone cyclization on the structure and dynamics of a protein is essential for using protein topology engineering to alter protein stability and function. Here we have determined, for the first time, the structure and dynamics of the linear and various circular constructs of the N-SH3 domain from protein c-Crk. These constructs differ in the length and amino acid composition of the cyclization region. The backbone cyclization was carried out using intein-mediated intramolecular chemical ligation between the juxtaposed N- and the C-termini. The structure and backbone dynamics studies were performed using solution NMR. Our data suggest that the backbone cyclization has little effect on the overall three-dimensional structure of the SH3 domain: besides the termini, only minor structural changes were found in the proximity of the cyclization region. In contrast to the structure, backbone dynamics are significantly affected by the cyclization. On the subnanosecond time scale, the backbone of all circular constructs on average appears more rigid than that of the linear SH3 domain; this effect is observed over the entire backbone and is not limited to the cyclization site. The backbone mobility of the circular constructs becomes less restricted with increasing length of the circularization loop. In addition, significant conformational exchange motions (on the sub-millisecond time scale) were found in the N-Src loop and in the adjacent β-strands in all circular constructs studied in this work. These effects of backbone cyclization on protein dynamics have potential implications for the stability of the protein fold and for ligand binding.

Integrase inhibitor reversal dynamics indicate unintegrated HIV-1 dna initiate de novo integration.

BackgroundGenomic integration, an obligate step in the HIV-1 replication cycle, is blocked by the integrase inhibitor raltegravir. A consequence is an excess of unintegrated viral DNA genomes, which undergo intramolecular ligation and accumulate as 2-LTR circles. These circularized genomes are also reliably observed in vivo in the absence of antiviral therapy and they persist in non-dividing cells. However, they have long been considered as dead-end products that are not precursors to integration and further viral propagation.ResultsHere, we show that raltegravir action is reversible and that unintegrated viral DNA is integrated in the host cell genome after raltegravir removal leading to HIV-1 replication. Using quantitative PCR approach, we analyzed the consequences of reversing prolonged raltegravir-induced integration blocks. We observed, after RAL removal, a decrease of 2-LTR circles and a transient increase of linear DNA that is subsequently integrated in the host cell genome and fuel new cycles of viral replication.ConclusionsOur data highly suggest that 2-LTR circles can be used as a reserve supply of genomes for proviral integration highlighting their potential role in the overall HIV-1 replication cycle.Electronic supplementary materialThe online version of this article (doi:10.1186/s12977-015-0153-9) contains supplementary material, which is available to authorized users.

Efficient synthesis of trypsin inhibitor SFTI-1 via intramolecular ligation of peptide hydrazide

Cyclic peptide trypsin inhibitor SFTI-1 was synthesized via intramolecular ligation of a linear peptide hydrazide with high yield. This cyclization strategy did not cause epimerization at the C-terminal Arg residue. CD spectrum and NMR spectroscopy analysis demonstrated that well-folded SFTI-1 could be obtained via standard oxidative folding process. Thus, we present a simple and cost-efficient strategy for the synthesis of SFTI-1.

Effects of preorganization and hydrogen bonding on intramolecular chemical ligation of (N)-and (O)-acyl isopeptides

The ease of intramolecular N-to N-and O-to N-acyl transfers in (N)-acyl isopeptides and (O)-acyl isopeptides was found to be governed by preorganization rationalized in terms of geometrical and energetic characteristics of the linear isopeptide backbone, which depends on the chain length. Intramolecular hydrogen bonding was found another important factor of reactivity able to stabilize the chemical ligation transition state.

Photodegradable Supramolecular Hydrogels with Fluorescence Turn-On Reporter for Photomodulation of Cellular Microenvironments

Photodegradable hydrogels that allow 3D encapsulation of cells are important biomaterials to modulate cellular microenvironments with temporal and spatial resolution. Herein we report a photodegradable hydrogel formed by the self-assembly of short peptides modified with a novel phototrigger. The phototrigger is a biaryl-substituted tetrazole moiety that, upon mild light irradiation, undergoes rapid intramolecular photoclick ligation to form a highly fluorescent pyrazoline moiety. Short peptides linked with a tetrazole-containing moiety, Tet(I) or Tet(II), are able to self-assemble into hydrogels, among which the Tet(I)-GFF and Tet(II)-GFRGD gels show good mechanical strength and biocompatibility for 3D encapsulation and prolonged culture of live cells. The phototriggered tetrazole-to-pyrazoline transformation generates a highly fluorescent reporter and induces the disassembly of the hydrogel matrix by disturbing the balance between hydrophilic interaction and π-π stacking of the self-assembled system. Photomodulation of cellular microenvironments was demonstrated not only for the cells grown on top of the gel but also for stem cells encapsulated inside the hydrogels.