Intramedullary Nailing Research Articles

Retrospectİve Comparison Of Talon Or Conventional Locking Nailing For Tibial Shaft Fractures

Objective: Tibial shaft fractures are common orthopedic injuries that present challenges in treatment selection. The primary aim of this retrospective study was to compare the clinical outcomes of tibial shaft fractures treated with Talon and conventional locking nails. Methods: Ninety-four patients who underwent tibial intramedullary nailing between 2019-2021 were included in the study. The patients were divided into two groups based on the type of distal locking used: Group 1 received conventional screw locking, and Group 2 received Talon locking. Patient age, gender, trauma mechanism, fracture type, and surgery data were analyzed. The complications and bone union processes during follow-up were evaluated and compared between the two nail designs. Results: The age and gender of the patients included in the study were statistically similar in both groups. Furthermore, the Talon group demonstrated significantly shorter union times (p < 0.001*). According to the OTA classification, there was a preference for screw-locking systems in more complex fractures (p = 0.017). Conclusion: The results of this retrospective study suggest that Talon locking nails may offer advantages over conventional screw locking, especially in younger patients, resulting in earlier bone union. Further research is needed to investigate Talon nails' biomechanical stability and suitability for specific fracture types.

A Prospective Study on Tibial Shaft Fractures Treated with Suprapatellar Approach.

Tibial diaphysis represents the primary location for tibial fractures, accounting for 80% of such cases, often accompanied by fibular fractures. In terms of surgical management, the recommended technique for addressing both displaced and undisplaced tibial shaft fractures in adults is intramedullary nail fixation. Additionally, there is a growing consideration for suprapatellar nailing, which involves performing the procedure with the knee in a semi-extended position, as a potentially safe and efficacious alternative. To evaluate the clinical and functional union amongst tibial shaft fracture cases, managed by nailing in the suprapatellar approach, and to study the complications associated with it. Our study with prospective observational design was conducted for 18 months on 30 patients with tibial shaft fractures. Following comprehensive laboratory assessments and confirmation of surgical fitness, the patients underwent surgical intervention through a specialised suprapatellar approach employing expert tibial nailing. The mean age of the subjects was 42.83 ± 11.47 years, and the majority were males (70.0%). Notably, there was a statistically significant reduction in Visual Analogue Scale scores and a concurrent increase in Lysholm Knee Scoring Scale scores during the follow-up period, indicating substantial enhancements in both clinical and functional outcomes. Delayed union was the complication observed in three individuals. We found that the younger the age of the subjects, the earlier the surgery after an injury, the better the functional outcome. Expert tibial nailing with a suprapatellar approach was successful in yielding clinical and functional union amongst the subjects with tibial shaft fractures. In addition, delayed union was the complication observed in the approach, which was evident in a few cases.

One year "ADAPT system" use for proximal femoral fracture osteosynthesis with intramedullary nail . A case control study.

Proximal femoral fractures (PFF) are a significant health concern among the elderly, often leading to complications and high mortality rates. Intramedullary nailing is widely considered the most effective treatment for lateral proximal femoral fractures (LPFF), with the Tip Apex Distance (TAD) being a crucial predictor of surgical success. This study aimed to compare outcomes between patients treated with and without the ADAPT (ADAptive Positioning Technology) system, which aids in the precise placement of the cephalic screw. A retrospective analysis was conducted on 97 patients with intertrochanteric fractures treated in 2022. Patients were divided into two groups: those treated with the ADAPT system (group I, n=34) and those treated without it (group II, n=63). Fractures were classified according to AO/OTA classification. The primary outcomes measured were operative time, cephalic screw angle, TAD, and incidence of lag screw cut-out. Statistical analyses included chi-square tests and t-tests, with significance set at P < 0.05. The ADAPT system did not significantly reduce TAD (18.21 mm in the ADAPT group vs.19.94 mm in the control group, p=0.149). Operative times were similar between the groups. The incidence of lag screw cut-out was low in both groups, with no significant differences. The study confirmed a strong correlation between higher TAD and increased risk of screw cut-out, underscoring the importance of precise screw placement. Computer-assisted surgery, such as the ADAPT system, aims to enhance the accuracy of cephalic screw placement. In this study, the ADAPT system didn't demonstrate a statistically significant advantage in reducing TAD or preventing screw cut-out. Nevertheless, the critical role of TAD in preventing fixation failure was reaffirmed, emphasising the need for precise surgical techniques. While the ADAPT system did not show a significant advantage in reducing TAD or preventing screw cut-out in this study, the importance of achieving optimal TAD in cephalomedullary nailing was reinforced. Future research should continue to explore the role of computer-assisted systems in enhancing surgical accuracy and improving outcomes for patients with LPFF.

Management of infected bone defects of the femoral shaft by Masquelet technique: sequential internal fixation and nail with plate augmentation

BackgroundTo evaluate the effectiveness of a sequential internal fixation strategy and intramedullary nailing with plate augmentation (IMN/PA) for bone reconstruction in the management of infected femoral shaft defects using the Masquelet technique.MethodsWe performed a retrospective descriptive cohort study of 21 patients (mean age, 36.4 years) with infected bone defects of the femoral shaft treated by the Masquelet technique with a minimum follow-up of 18 months after second stage. After aggressive debridement, temporary stabilisation (T1) was achieved by an antibiotic-loaded bone cement spacer and internal fixation with a bone cement–coated locking plate. At second stage (T2), the spacer and the locking plate were removed following re-debridement, and IMN/PA was used as definitive fixation together with bone grafting. We evaluated the following clinical outcomes: infection recurrence, bone union time, complications, and the affected limb’s knee joint function.ResultsThe median and quartiles of bone defect length was 7 (4.75–9.5) cm. Four patients required iterative debridement for infection recurrence after T1. The median of interval between T1 and T2 was 10 (9–19) weeks. At a median follow-up of 22 (20–27.5) months, none of the patients experienced recurrence of infection. Bone union was achieved at 7 (6–8.5) months in all patients, with one patient experiencing delayed union at the distal end of bone defect due to screws loosening. At the last follow-up, the median of flexion ROM of the knee joint was 120 (105–120.0)°.ConclusionsFor infected femoral shaft bone defects treated by the Masquelet technique, sequential internal fixation and IMN/PA for the reconstruction can provide excellent mechanical stability, which is beneficial for early functional exercise and bone union, and does not increase the rate of infection recurrence.

Total Hip Replacement and Femoral Nail Lengthening for Hip Dysplasia and Limb Length Discrepancy: A Literature Review.

Developmental dysplasia of the hip (DDH) is a serious condition resulting in inadequate acetabular development, distorted bone configuration, and substantially alteredhip biomechanics. An extensive leg length discrepancy (LLD) is commonly encountered in such cases, making a total hip arthroplasty (THA) procedure extremely challenging. Although good results in terms of patients' satisfaction, implant survival rates and overall improved quality of life have been reported, complication rates are considerably higher than primary THA procedures performed for idiopathic osteoarthritis. Reconstructing a dysplastic hip arthrosis and equalizing a preexisting LLD is a technically demanding procedure that is associated with significant bone and soft tissue complications. Intramedullary lengthening through motorized nails has become increasingly popular to address difficult cases with extensive LLD following THA in recent years. However, limited data on femoral lengthening procedures implemented following THA are available considering complications, radiological results, and patient-reported outcomes following staged THA and subsequent femoral lengthening using a femoral magnetically-driven intramedullary lengthening nail. We performed a literature review of the past 10 years in PubMed using the terms neglected hip dislocation, DDH, THA, and intramedullary lengthening nail as keywords. A total amount of eight cases addressing LLD through a telescoping intramedullary nail following THA in DDH have been reported in recent literature. All eight patients underwent primary THA for DDH followed by the implantation of the intramedullary lengthening nail. The mean THA was lengthened by 28.9 mm (from 13.0 to 45.0). The mean time for nail implantation after THA was 11.1 months (from 3.5 to 21). The mean time for lengthening per day through the nail was 0.94 mm (from 0.65 to 1.0) from 26 days to 70 days, and the mean lengthening through the nail was 37.6 mm (from 24.0 to 70.0). Good union and consolidation rates were reported by the authors, while there were no complications. The intramedullary distraction osteogenesis method with a telescopic rod can be an effective method to manage leg length discrepancies while avoiding soft tissue complications in challenging cases of DDH.

Oncological and functional outcomes of pathological fractures of lower extremities in patients with malignant bone tumors.

As managing pathological fractures of the extremities can be difficult, the present study aimed to present a treatment algorithm for lower extremity bone malignancies. A total of 38 patients with impending and pathological fractures were treated at the Department of Orthopedic Surgery in Kindai University Hospital. Age, sex, fracture site, type of primary malignancy, number of metastases, pre-fracture Eastern Cooperative Oncology Group performance status (ECOG-PS) score, adjuvant therapy, treatment modality, operative time, blood loss, postoperative complications, Musculoskeletal Tumor Society (MSTS) score, outcomes, follow-up period and the MSTS scores and ECOG-PS were compared in cases of primary malignant tumors and those cases of metastatic malignant tumors were retrospectively surveyed. Post-treatment MSTS scores in cases of impending and pathological fractures were compared between intramedullary nail fixation and non-intramedullary nail fixation procedures. Disease sites included the sub-trochanteric femur in 10 patients, trochanteric femur in 8, femoral diaphysis in 7, femoral neck in 5, bilateral trochanteric femur in 3, proximal tibia in 3 and distal femur in 2 patients. A total of 10 patients had metastases between 3-20 sites. The median pre-fracture ECOG-PS score was 1. Adjuvant radiotherapy was administered to 5, chemotherapy to 8 and radiotherapy with chemotherapy to 10 patients. Surgical procedures included intramedullary nails in 18 patients, tumor arthroplasty in 4, plate fixation in 3, artificial head replacement in three, compression hip screw (CHS) in 3, conservative treatment in 2, bilateral intramedullary nail fixation in 2 and artificial bone stem with combined intramedullary nail and plate fixation, right-sided artificial head replacement and left-sided CHS in 1 patient each. The MSTS score was 19.9±8.95 for intramedullary nail fixation and 24.3±7.45 for other procedures, with a negative association between the MSTS score and pre-fracture ECOG-PS. The median follow-up period was 8 months. The outcomes were as follows: Alive with disease, 23 patients; continued disease-free, 1 patient; and dead due to disease, 14 patients. The 1-year postoperative overall survival rate was 60.5%. Moreover, the group with metastatic malignant tumors, which had significantly worse ECOG-PS, had significantly lower MSTS scores than the group with primary malignant tumors. The authors' treatment algorithm for malignant bone tumors of the lower extremity was shown to be useful.

TO STUDY THE FUNCTIONAL AND RADIOLOGICAL OUTCOMES OF ANKLE ARTHRODESIS WITH CORTICOCANCELLOUS SCREW FIXATION VS INTRAMEDULLARY NAILING

Objective: We aimed to evaluate the functional and radiological outcomes of ankle arthrodesis using corticocancellous screw fixation vs intramedullary nailing. Methods: In our study, 22 cases underwent the procedure. This evaluation was performed based on preoperative radiologic data and at postoperative clinical visits at 2 months, 6 months, and 12 mo required postoperatively. Radiologic outcomes were measured by: (1) Rate of union, (2) Rate of adjacent joint arthritis, and (3) Alignment of the ankle joint. Functional outcomes were measured by using the AOFAS score (American Orthopedic Foot and Ankle Society score). The patients' Subjective assessments were done using the Cumberland Ankle Instability Tool (CAIT). Results: The angle between the tibia's long axis and a line parallel to the talus's long axis is determined in the AP projection. The mean angle was 89.6 degrees (85-100 degrees) in the intramedullary nailing group (IMN group) and 91.4 degrees in the corticocancellous screw group (CC screw). The angle between the tibia's long axis and a line that is perpendicular to the talus’s long axis. The mean angle was 40.5 degrees (30-45 degrees) in the IMN group and 41.6 degrees in the CC screw group. The mean AOFAS score (American Orthopedic Foot and Ankle Society score) was 83.25 in the IMN group and 80.5 in the other group. The mean Cumberland Ankle Instability Tool (CAIT) score was 28 in the IMN group and 27.5 in the other group. All the cases showed bony union except one case, the average time taken for the union was 18.5 w in the IMN group and 20.5 w in the CC screw group. Conclusion: According to our study, all of the patients with normal angles between the tibia's long axis and a line perpendicular to the talus's long axis were obtained in the AP projection, and the angle between the tibia's long axis and a line that is perpendicular to the talus’s long axis. These patients also showed better Cumberland Ankle Instability Tool (CAIT) and AOFAS (American Orthopedic Foot and Ankle Society) scores in both comparison groups.

Simultaneous correction of leg length discrepancy and angular deformity of the distal femur with retrograde Precice nails: a retrospective analysis of 45 patients.

Magnetically controlled motorized intramedullary lengthening nails (ILNs) can be employed for simultaneous correction of angular deformities of the distal femur and leg length discrepancy. This spares typical complications of external fixators but requires precise preoperative planning and exact intraoperative execution. To date, its results are insufficiently reported. We aimed to elucidate the following questions: (i) Is acute angular deformity correction and gradual femoral lengthening via a retrograde ILN a reliable and precise treatment option? (ii) What are the most common complications of treatment? Acute angular deformity correction and subsequent gradual lengthening of the distal femur with retrograde ILN was retrospectively analyzed in 45 patients (median patient age: 15 years, interquartile range [IQR] 13-19 and median follow-up: 40 months, IQR 31-50). Outcome parameters were accuracy, precision, reliability, bone healing, and complications of treatment. The median distraction was 46 mm (IQR 29-49), median distraction and consolidation index 0.9 mm/day (IQR 0.7-1.0) and 29 days/cm (IQR 24-43), respectively. The median preoperative mechanical axis deviation (MAD) was 30 mm (IQR 23-39) in the varus cohort and -25 mm (IQR -29 to -15) in the valgus cohort and reduced to a mean of 8 mm (standard deviation [SD] 8) and -3 (SD 10), respectively. Accuracy, precision, and reliability of lengthening were 94%, 95% and 96%, respectively. Accuracy and precision of deformity correction were 92% and 89%, respectively. In total, 40/45 of patients achieved distraction with a difference of less than 1 cm from the initial plan and a postoperative MAD ranging from -10 mm to +15 mm. In 13/45 patients unplanned additional surgeries were conducted to achieve treatment goal with nonunion being the most frequent (4/45) and knee subluxation (3/45) the most severe complication. Acute deformity correction and subsequent lengthening of the distal femur with retrograde ILN is a reliable and accurate treatment achieving treatment goal in 89% but unplanned additional surgeries in 29% of patients should be anticipated.

A literature review of current surgical treatment for congenital pseudoarthrosis of the tibia

Congenital pseudarthrosis of the tibia (CPT) is an infrequently observed condition. However, it is considered to be one of the most complex ailments in the field of pediatric orthopedics. In cases where a tibial fracture is absent, the conventional treatment approach involves using bracing as a preventive measure against fractures. Various surgical modalities have been proposed for the management of CPT, including intramedullary (IM) rod fixation, external fixators, on-lay grafts, cancellous grafts, periosteal grafts, Paley cross-union, amputation, vascularized fibula grafts, and induced membrane techniques. These modalities can be used in different combinations and permutations. The need for repetitive surgical interventions due to unsuccessful therapeutic outcomes or modifications in secondary treatments can significantly disrupt the childhood experience, resulting in prolonged and recurrent functional limitations. In certain instances, amputation may be required as a primary or secondary treatment modality. This literature review will clarify the current surgical interventions for CPT disease based on a summary of research data. The surgery the patient receives significantly impacts their general health and capacity to heal.

The effect of anterior support screw (AS2) in unstable femoral trochanteric fractures: A multicenter randomized controlled trial

ObjectivesThis study was conducted to verify the effectiveness of Anterior Support Screw (AS2) for unstable femoral trochanteric fractures. DesignA multicenter, prospective, randomized controlled trial SettingThis study was conducted across 15 academic medical centers in Japan Patients/ParticipantsWe enrolled 240 cases of femoral trochanteric fractures with posterior crushing and intramedullary displacement of proximal bone fragments across 15 institutions in Japan. InterventionAll patients were subjected to a reduction in which the anterior cortex was brought into contact. The patients were randomly assigned to the anterior support screw group (AS2 group) and the non-screw group (control group). Main Outcome MeasurementsTwo computed-tomography (CT) scans were taken immediately after surgery and early postoperative period (day 14–21) to investigate the reduction loss rate of the anterior cortex and sliding distances in the early postoperative period. ResultsThe reduction loss rate was 4.5 % in the AS2 group and 16.8 % in the control group, indicating a significantly lower reduction loss rate in the AS2 group (p = 0.003). The average sliding distance was 1.8 mm in the AS2 group and 2.8 mm in the control group, indicating a significantly shorter sliding distance in the AS2 group (p < 0.0001). ConclusionAdding a screw in front of the intramedullary nail significantly reduces reduction loss, and maintains anterior bony contact. This study also showed that these screws suppress the sliding distance during the postoperative period. Level of EvidenceTherapeutic Level I.

Changes in femoral anteversion after intramedullary nailing for pediatric femoral shaft fracture: a multicenter study

BackgroundThe rotational change after using a flexible intramedullary (IM) nail for femoral shaft fractures has been a concern for many surgeons. Recently, a statistical shape model (SSM) was developed for the three-dimensional reconstruction of the femur from two-dimensional plain radiographs. In this study, we measured postoperative femoral anteversion (FAV) in patients diagnosed with femoral shaft fractures who were treated with flexible IM nails and investigated age-related changes in FAV using the SSM.MethodsThis study used radiographic data collected from six regional tertiary centers specializing in pediatric trauma in South Korea. Patients diagnosed with femoral shaft fractures between September 2002 and June 2020 and patients aged < 18 years with at least two anteroposterior (AP) and lateral (LAT) femur plain radiographs obtained at least three months apart were included. A linear mixed model (LMM) was used for statistical analysis.ResultsOverall, 72 patients were included in the study. The average patient age was 7.6 years and the average follow-up duration was 6.8 years. The average FAV of immediate postoperative images was 27.5 ± 11.5°. Out of 72 patients, 52 patients (72.2%) showed immediate postoperative FAV greater than 20°. The average FAV in patients with initial FAV > 20° was 32.74°, and the LMM showed that FAV decreased by 2.5° (p = 0.0001) with each 1-year increase from the time of initial trauma.ConclusionsThis study explored changes in FAV after femoral shaft fracture using a newly developed technology that allows 3D reconstruction from uncalibrated 2D images. There was a pattern of change on the rotation of the femur after initial fixation, with a 2.5° decrease of FAV per year.

Hybrid fixation for repair of dual forearm fractures of adolescent patients: A case report and literature review

Purpose: To assess hybrid fixation as an alternative option for repair of dual forearm fractures of adolescent patients. Case presentation: An 11-year-old boy presented with trauma to his right forearm resulting from playing on a trampoline. X-ray examinations confirmed fractures of both the right ulna and radius. Closed reduction and internal ESIN (elastic stable intramedullary nailing) fixation was selected for repair of the radius. Closed reduction of the ulnar fracture was unsuccessful, thus open reduction was performed. However, due to instability of the ulnar fracture after open reduction, internal plate fixation of the ulna was selected. At 3 months after surgery, the patient demonstrated full range of motion with no pain.

Straight intramedullary MultiLoc nails for displaced proximal humeral fractures: health status, radiographic results, clinical outcome, and complications

BackgroundThe treatment of the displaced proximal humerus fractures (PHF) still facing a lot of unsolved problems. The aim of this study was to evaluate the clinical effect of MultiLoc nails for the treatment of PHF and present outcomes of patients with different Neer’s classification and reduction quality.MethodsAdult patients with PHFs were recruited and treated with MultiLoc nail. Intraoperative data, radiographic and functional outcomes, as well as occurrence of postoperative complications were assessed.Results48 patients met inclusion and exclusion criteria and were included in this study. The DASH Score were 32.2 ± 3.1 points at 12 months, and 37.3 ± 2.5 points at the final follow-up. The mean ASES score at 12 months and final follow-up were 74.4 ± 6.2 and 78.8 ± 5.1, respectively. The mean CM Score in all 48 patients reached 68 ± 6.4 points at the final follow-up, relative side related CM Score 75.2 ± 7.7% of contralateral extremity. The incidence rate of complications was 20.8%. Patients with fracture mal-union, adhesive capsulitis were observed but no secondary surgeries were performed. There was no significantly difference of DASH Score 12 months after surgery and at the last follow-up among patients with different Neer’s classification or reduction quality. However, functional outcomes such as ASES score and CM score were significantly influenced by severity of fracture and the quality of fracture reduction.ConclusionsOur study demonstrated that MultiLoc nails is well suited for proximal humeral fractures, with satisfactory health status recovery, good radiographic results, positive clinical outcomes and low rates of complications. The treatment for four part PHF still faces great challenges. Accurate fracture reduction was an important factor for good functional result.

Peri-implant fractures after Intramedullary fixation for femoral trochanteric fracture: a multicenter (TRON Group) study.

With the rise in elderly populations, the incidence of femoral trochanteric fractures has also increased. Although intramedullary nail therapy is commonly used, the incidence of peri-implant fractures (PIFs) as a complication and its associated factors are not fully understood. The purpose of this study was to determine the incidence of PIFs and treatment strategies and outcomes. A retrospective study across 11 hospitals from 2016 to 2020 examined 1855 patients with femoral trochanter fracture. After excluding 69 patients treated without intramedullary nailing, 1786 patients were analyzed. Parameters studied included age, sex, body mass index, medical history, and treatment methods. PIFs were categorized using the Chan classification. Treatment outcomes and patient mobility were assessed using the Parker Mobility Score, and postoperative complications and one-year survival data were compiled. The incidence of PIFs was 8 in 1786 cases. Chan classification showed 1 case of N1A, 6 of N2A, and 1 of N2B. Only the type N1 case was a transverse fracture, whereas all cases of type N2 were oblique fractures. Among these cases, five patients had fractures extending to the upper part of the femoral condyle. The patient with N1A and one bedridden patient with N2A fracture underwent conservative treatment, one patient with N2A in which the fracture did not extend to the condyle was treated with nail replacement, and 5 patients (N2A: 4, N2B: 1) with fractures extending to the condyle were treated with additional plate fixation. All patients had survived at one year after treatment for PIF, and no reoperations were required. The incidence of PIF was very low (0.45%). Of the 6 PIF cases, excluding the bedridden patients, the treatment of choice for PIF was an additional plate if the fracture line extended to the femoral condyle; otherwise, the nail was replaced. All patients achieved bony fusion. Therapeutic Level IV.

Chemotherapy Release From Bortezomib-Impregnated Polymethylmethacrylate-Coated Intramedullary Nails: A Novel In Vitro Study for a Local Chemotherapy Delivery Device.

Bortezomib (BAN) is a proteasome inhibitor approved for the treatment of multiple myeloma and lymphoma. Despite its efficacy in various tumor models, systemic administration can result in toxicity to healthy organs. The purpose of this study is to evaluate the elution profile of BAN from PMMA cement for the local treatment of orthopedic tumors. BAN solution (5 mg; 2 mg/mL) was mixed with Simplex cement (40 g, Stryker), followed by injection of cement into an antibiotic cement nail mold (13 mm) to coat a 10 mm titanium femoral nail (DePuy Synthes). Once the cement polymerized, the nail was cut into 2 cm segments for the BAN elution study. There is a sustained release of BAN for up to 28 days. The overall concentration of BAN released at each time point was between 74 and 263 ng/ml, which is compatible with the peak blood concentration of a single intravenous BAN injection. This study demonstrates the feasibility of using PMMA bone cement as a local BAN delivery tool, essential for future studies and treatment targeting multiple myeloma cells.

Risk of Axillary Nerve Injury With Medial Support Screws in Intramedullary Nails: An Anatomical Study.

In recent years, intramedullary nails with medial support screws for proximal humeral fractures have become available. Although these devices have a potential risk of iatrogenic axillary nerve injury, no studies have investigated the anatomical relationship between the medial support screws in the modern intramedullary nail and the axillary nerve. This study aimed to clarify the anatomical relationship between the medial support screws in the intramedullary nail and the axillary nerve. In total, 29 cadaveric shoulders (mean age: 82.6 years old (range: 61-105); 15 males and 14 females) were included in this study. Shoulders within whole-body cadavers were used in all cases. A single proximal humeral nail with medial support screws (ARISTO Proximal Humeral Nail; MDM, Tokyo, Japan) was used. The distance of each medial support screw from the axillary nerve and its branches was measured. In two (6.90%) of 29 shoulders, the axillary nerves came into contact with the medial support screws. In the remaining 27 of 29 shoulders (93.1%), the nerves were located proximal to the medial support screws. Medial support screws in proximal humeral fracture nails had the potential to injure the axillary nerve and its branches.

A case report demonstrating the utilization of computer-aided design technology and intramedullary nails for the management of femoral deformity and fracture.

To effectively address severe deformities at the fracture site in patients, meticulous preoperative preparation is essential. This involves ensuring the restoration of the normal structural force line of the affected area and prevention of any residual deformities. By utilizing E3D technology prior to surgery, creating models based on individual patient image data and performing osteotomy, the required surgical parameters can be measured, thereby reducing surgical risks and enhancing precision. This article documents a case involving a fractured femoral shaft resulting in femoral deformation. In this case, computer-aided design technology was employed for preoperative planning and data measurement to guide the corrective osteotomy and fracture fixation procedures. The E3D software utilizes advanced techniques such as customized osteotomy, virtual reduction and internal fixation insertion technology. This enables the software to accurately pre-select the correction of femoral deformities and determine the appropriate specifications and types of internal implants. As a result, the software can create precise, rational, and personalized repair plans tailored to each patient's needs.

Structural simulation of Ti–Ha–CaCO3 biocomposites using finite element analysis (FEA) for biomechanical stability of hip implant

AbstractThe structural integrity of new biocomposite implants is critical in ensuring the success of biomedical implants under physiological loading conditions. Studying the stress distribution, deformation, and potential failure modes under different loading scenarios is complex, expensive, and time-consuming, as it involves repeated surgery on clinical assessment. The present study aims to investigate the biomechanical stability of hip implants made of a Ti–Ha–CaCO3 biocomposite using finite element analysis. The Ti–Ha–CaCO3 biocomposite was modeled and simulated using Solidworks. The model mesh was generated to represent the implant’s geometry accurately, and normal human activities (standing and jumping) were considered the boundary conditions with the lower part of the femur fixed. The model was subjected to static loading following ISO 7206-4 with an equivalent load of 2300 N according to ASTM F2996-13 standard. The Ti–Ha–CaCO3 biocomposite demonstrated outstanding biomechanical stability under loading circumstances. The maximum von Mises stress (354.7 MPa) observed with the GSB-femur model in the implant was below the yield strength of the titanium implant, indicating that the implant can withstand applied loads without experiencing permanent deformation. However, 74.11 MPa was obtained as acceptable von Mises stress using GSB intramedullary rods for bone fixation. The most stable implant is DSB, with the lowest displacement value of 2.68 mm. Low equivalent strains were achieved for all the implants, as the highest strain (0.012) was obtained in the simulation of the stem DSB-femur model. Low-stress signals (SS) were obtained for the implant-femur models, indicating they are suitable for replacing bone for that loading. The DSB (7.19) is the most suitable among the studied stem-femur models, and GSB (0.87) remains the suitable intramedullary rod-femur model with the lowest SS.

Extra-articular proximal tibia fracture fixation with locked plating versus intramedullary nailing: A meta-analysis

ObjectivesThis study compared outcomes of locked plating (LP) versus intramedullary nailing (IMN) techniques for treatment of extra-articular proximal-third tibia fractures. MethodsData Sources: PubMed, Ovid MEDLINE Study SelectionStudies were included if they compared LP and IMN fixation for proximal one third tibial shaft fractures without articular extension or with simple articular extension into the tibial plateau. Minimum 1 year of clinical and radiographic follow up was used. Data ExtractionOutcomes assessed included operative duration, postoperative knee range of motion (ROM), union outcomes (time to union, nonunion, malunion, delayed union), and incidence of postoperative complications (superficial and deep infection, secondary surgical intervention, compartment syndrome). Data SynthesisSeparate random-effects meta-analyses were conducted for each outcome. For categorical data, relative risks were used whereas the standardized mean difference was used for continuous variables, with corresponding 95 % confidence intervals. Results7 studies were included reporting the outcomes of 319 patients treated with LP and 300 treated with IMN. IMN fixation had significantly shorter time to union (p = 0.049) and lower risk for superficial infection (p = 0.028). However, LP conferred a significantly lower risk for malunion (p = 0.017) and postoperative compartment syndrome (p = 0.018). ConclusionIMN demonstrated significantly shorter time to union and lower risk of superficial infection when treating extra-articular proximal tibia fractures, while LP fixation demonstrated significantly lower risk for malunion and postoperative compartment syndrome. Although successful results can be achieved with good technique in LP and IMN fixation, a significant complication profile exists with these fractures regardless of construct choice. Level of EvidenceTherapeutic Level III

Reconstruction of unstable ankle charcot deformity using a 3-D printed titanium porous block and hindfoot nail – A case report

Charcot neuroarthropathy (CN) of the ankle joint can cause marked bone resorption of the talus resulting in severe deformity and instability. The utilisation of a 3-D printed bespoke titanium porous block that allows the use of an intramedullary calcaneo-tibial nail is an attractive option in such cases that has been reported for use in post-trauma deformities, following tumour resections, in avascular necrosis of talus and for revision of failed total ankle replacements, however has not previously been reported for Charcot ankle reconstructions. We present a novel case and surgical technique illustrating the use of a 3-D printed titanium porous block and hindfoot nail for reconstruction of a deformed and unstable Charcot hindfoot.