Intracanal Materials Research Articles

Assessing the Impact of the Metal Artifact Reduction Tool on Detecting Furcation Lesions in Maxillary Molars with Different Intracanal Posts: An Ex Vivo Cone-beam Computed Tomography Study

IntroductionConsidering the potential image compromise and diagnostic challenges posed by metals, this study aimed to assess the efficacy of the metal artifact reduction (MAR) tool in cone-beam computed tomography examinations for detecting furcation lesions in upper molars treated endodontically and restored with different intracanal posts. MethodsThis ex vivo study used 45 endodontically treated maxillary first molars, categorized into the following3 groups (n = 15): control (without intracanal post), metal post, and fiberglass post. Simulations were conducted in the laboratory to replicate alveolar bone, periodontal ligament, and grade I, II, and III furcation lesions. Cone-beam computed tomography scans were obtained with and without the MAR tool, and the furcation lesions were evaluated considering a 5-point Likert scale. Data were analyzed at 5%. ResultsIn the control group, there was no influence of MAR (P > .05); grade II lesions were not diagnosed, and grade III lesions were the most detected (P < .05). In the metal post group with MAR, grade III lesions were diagnosed more frequently than I and II (P < .05) and grade III without MAR (P < .05). In the fiberglass post group, the diagnosis of grade I lesions decreased with MAR (P < .05), and without MAR, grade III was most diagnosed (P < .05); grade III lesions were the most diagnosed (P < .05). ConclusionsThe MAR tool was only effective for diagnosing grade III furcation lesions, regardless of the intracanal material. Its application for grade I and II lesions did not contribute to improved diagnosis. Furthermore, in the fiberglass post group with grade I lesions, the MAR tool negatively affected the detection of the lesions.

The Effects of Calcium Hydroxide-loaded Poly(Lactic-co-glycolic Acid) Biodegradable Nanoparticles in the ex vivo External Inflammatory Root Resorption Model.

To evaluate the calcium ions (Ca2+) diffusion of calcium hydroxide-loaded poly(lactic-co-glycolic acid) biodegradable nanoparticles [Ca(OH)2-loaded PLGA NPs] compared with conventional Ca(OH)2 in a simulated external root resorption ex vivo model using inductively coupled plasma mass spectrometry (ICP-MS). Thirty human mandibular premolars were prepared by sectioning the root segments to create roots measuring 10 mm from the anatomical apex. The root canals were instrumented and irrigated. The external root surface cavities were created. The specimens were randomly divided into the following three groups: Poly(lactic-co-glycolic acid) (PLGA; control group, n = 10), conventional calcium hydroxide [Ca(OH)2] (Metapaste, n = 10), and Ca(OH)2-loaded PLGA NPs [15% Ca(OH)2, n = 10]. The intracanal materials were placed in the root canals, and the teeth were stored in phosphate-buffered saline at 37°C. The release of Ca2+ was measured at 7, 30, and 60 days using ICP-MS. Both Ca(OH)2-loaded PLGA NPs and Metapaste groups exhibited higher levels of Ca2+ release compared to the PLGA group at all time points. During the initial 7-day period, the Ca(OH)2-loaded PLGA NPs exhibited a significantly greater release of Ca2+ compared to Metapaste. From day 7 to day 30, Metapaste displayed a significantly higher release of Ca2+ than the Ca(OH)2-loaded PLGA NPs, but it experienced a subsequent decline in Ca2+ release after the 30-day period. After the 30-day mark, the Ca(OH)2-loaded PLGA NPs once again exhibited a significantly higher release of Ca2+ compared to Metapaste. The Ca(OH)2-loaded PLGA NPs exhibited sustained release of Ca2+ that exceeded conventional Ca(OH)2, particularly during the first week, demonstrating a greater amount of Ca2+ release. The utilization of Ca(OH)2-loaded PLGA NPs as an intracanal medication for external inflammatory root resorption provided sustained release and had the potential to enhance the efficacy of inhibiting root resorption more effectively than conventional Ca(OH)2.

Influence of a Metal Artifact Reduction Filter on the Diagnostic Accuracy of Complete and Incomplete Vertical Root Fractures

IntroductionThis study aimed to assess the influence of the e-vol DX BAR filter on the diagnostic accuracy of complete and incomplete vertical root fractures (VRFs). MethodsTwenty single-rooted teeth were selected. The tooth crowns were removed, and the root canals were prepared up to a 40/.06 instrument (ProTaper Next). Each specimen was scanned in a Prexion 3D cone-beam computed tomography (CBCT) device, in a dry human skull, in 4 different situations: no root canal filling, gutta-percha, fiberglass post, and metal post. The specimens were fractured in a universal testing machine by using a customized wedge. Each specimen was reinspected to confirm the presence of incomplete VRFs. Another set of CBCT scans was performed. Then, the fractures were completed in the universal testing machine, the teeth were reinspected, and the CBCT images were acquired again. Images were assessed by using the e-Vol DX software system, with the BAR filter and with the original images, for the diagnosis of VRFs. Statistical analysis was performed by using the DeLong and McNemar tests for the comparison of the area under the receiver operating characteristic curves (AUC), accuracy, sensitivity, and specificity values. ResultsThe use of the BAR filter did not improve the diagnostic values of AUC, accuracy, sensitivity, and specificity in both fracture patterns (P > .05). Incomplete VRFs presented significantly lower AUC, accuracy, and sensitivity compared with complete VRFs (P < .0001). ConclusionsThe BAR filter did not improve the diagnostic accuracy of VRFs. The intracanal materials also did not influence the diagnosis. Incomplete VRFs were highly associated with a decrease in sensitivity.

Does endodontics influence radiological detection of external root resorption? an in vitro study

BackgroundExternal root resorption (ERR) has a multifactorial etiology and is difficult to diagnose, which means that is continues to be of research interest. This work mainly aims to determine whether external root resorption can be differentially detected in root-filled versus non-endodontically treated teeth using digital periapical radiography (DPR) and cone-beam computed tomography (CBCT).MethodsThe Checklist for Reporting In-vitro Studies (CRIS) guidelines were followed throughout this study. This experiment highlights the preparation and generation of standardized synthetic teeth measured on three-dimensional records converted into Digital Imaging and Communication on Medicine (DICOM) file format. Twelve replicate maxillary incisors were randomized into two groups: (G1) six non-endodontically treated, and (G2) six endodontically treated teeth. In both groups, actual tooth lengths of all specimens were measured and compared with measurements obtained using DPR and CBCT. Simulated ERR lesions [0.12, 0.18, 0.20 mm × 0.5 mm depth in the mesial, distal and palatal apical regions] were created progressively, radiographic images were recorded, and 24 DPRs and 96 CBCTs were obtained in total. Eight blinded, previously calibrated researchers made a total of 1920 measurements (using Horos Software). Data were analyzed using the Shapiro–Wilk, ANOVA, Kruskal–Wallis and Wilcoxon rank post-hoc tests [Bonferroni correction in multiple comparison tests (p < 0.05)].ResultsICC values for intra- and inter-examiner agreement were appropriate. DPR overestimated ERR detection compared to the actual and CBCT measurements [Mean diff = 0.765 and 0.768, respectively]. CBCT diagnosis of ERR lesions in specimens without root canal treatment was significantly more accurate than DPR diagnoses on both non-endodontically and endodontically-treated specimens [p = 0.044; p = 0.037, respectively]. There was an 18.5% reduction in sensitivity in all DPR diagnoses made on endodontic teeth versus those made on non-endodontically treated teeth. For the smallest ERR lesions, this sensitivity was even more marked, with 27.8 and 25% less sensitivity, respectively.ConclusionsThe results of this study highlight that both CBCT and DPR are good diagnostic methods for ERR. Nevertheless, root canal filling material influences diagnostic capability in ERR. The clinical significance was that the presence of intracanal material reduces the detection and diagnosis of ERR by DPR in teeth with root canal treatment.

Vertical Root Fracture in Non-Endodontically and Endodontically Treated Teeth: Current Understanding and Future Challenge.

A vertical root fracture (VRF) is a complex complication that usually leads to tooth extraction. The aim of this article is to review the prevalence, demography, distribution, diagnostic methods, etiology and predisposing factors, clinical features, radiographic characteristics and treatment strategies of VRFs in non-endodontically treated teeth (VRFNETT) and endodontically treated teeth (VRFETT). Search terms for each subject related to VRFNETT and VRFETT were entered into MEDLINE, PubMed and Google Scholar. Systematic reviews, retrospective cohort studies, demographic research, clinical studies, case reports and case series were reviewed. Most of the VRFs were found in patients older than 40 years old. Older populations were discovered in the non-endodontically treated VRF group when compared to the endodontically treated VRF group. Male patients were found at a greater prevalence than females in the non-endodontically treated VRF group. The initial occurrence of a VRF may accompany radiolucent lines within the root canal, unusual space between the canal wall and intracanal material, a widening of the PDL space along the periradicular surfaces, angular bony destruction, step-like bone defects, V-shaped diffuse bone defects, or root resorptions corresponding to the fracture line before the clear separation of the fractured fragment. The indicative clinical and radiographic signs of VRF included a coronally positioned sinus tract, deep-narrow periodontal defects, the displacement of a fractured fragment, periradicular radiolucent halos and the widening of the root canal space. Interestingly, VRFNETT are more often observed in the Chinese population. Some patients with multiple VRFs were observed, suggesting possible predisposing factors in genetics and tooth development. The management of a VRF usually involves a multidisciplinary approach. The common distribution and features of VRFNETT and VRFETT were elucidated to facilitate recognition and diagnosis. Besides extraction, variable therapeutic schemes, such as the repair of the VRF, root amputation and others reported in earlier literature, are available. A long-term prognosis study of the various therapeutic strategies is needed.

Root canal filling materials in primary teeth - review.

Inadequate treatment of endodontic infections in primary teeth results in a loss of а deciduous tooth or abnormality in the development of hard dental tissues of the permanent successor. The main goal is to maintain the integrity and health of the primary tooth until their physiological exfoliation. The success of the endodontic treatment depends on the antimicrobial activity of the root canal filling material that contributes to the elimination or reduction of the microbial infection of the root canal system. The aim of this article is to systematically review the contemporary scientific literature concerning the root canal filling materials used in primary teeth. A critical evaluation of the antimicrobial activity, as well as the advantages and disadvantages of the investigated materials, has been made. Knowledge of the composition and characteristics of the available obturating materials is a useful advantage to dentists to address the functional problems associated with endodontic infections in very young patients. Future studies should also seek and compare the long-term effects of the use of traditional and alternative intracanal materials.

Influence of metal artefact reduction tool on the detection of vertical root fractures involving teeth with intracanal materials in cone beam computed tomography images: A systematic review and meta-analysis.

The effectiveness of the metal artefact reduction (MAR) tool for the detection of vertical root fracture (VRF) by cone beam computed tomography (CBCT) images is controversial. To evaluate the effectiveness of the MAR tool on VRF detection involving teeth with intracanal materials in CBCT images. In September 2019, an electronic search was performed in six databases (PubMed, Scopus, Web of Science, Cochrane, Lilacs and Embase). The electronic search was updated in May 2020 through searches in Google Scholar and references of included studies (embracing the electronic and gray literature searches). No language or year restrictions were applied. Independently, two reviewers examined titles, abstracts and full texts according to the eligibility criteria that were as follows: diagnostic studies that evaluated the effectiveness of the MAR tool on the diagnosis of VRF in human teeth (laboratory or in vivo studies) on CBCT images. The risk of bias was evaluated using the Quality Assessment Tool for Diagnostic of Accuracy Studies-2 (QUADAS-2). For conducting the meta-analysis, the values of sensitivity, specificity, diagnostic odds ratio (DOR) and area under the ROC curve (AUC) were obtained, considering the subgroups with and without MAR active. The Grading of Recommendation, Assessment, Development and Evaluation instrument was applied to assess the level of evidence across the studies using GRADEpro software. A total of 8 laboratory studies were included in both systematic review and meta-analysis. The values of sensitivity, specificity, DOR and AUC to VRF diagnosis with and without MAR active were, respectively, 0.586 and 0.603; 0.699 and 0.713, 3.037 and 3.767; 0.67 and 0.71. The quality of the evidence suggested low confidence in estimating the outcomes. The MAR tool decreased slightly the diagnostic values of VRF involving teeth with intracanal materials in laboratory studies. However, it is important to highlight that most studies had an uncertain risk of bias. Although a low level of evidence and high heterogeneity were observed in the included studies, the meta-analysis revealed better diagnosis values for VRF detection when the MAR was deactivated when analysing extracted teeth in a laboratory setting. PROSPERO-CRD42020145222. This study was financed in party by the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior-Brasil (CAPES).

Combined Use of 2 Cone-beam Computed Tomography Scans in the Assessment of Vertical Root Fracture in Teeth with Intracanal Material

IntroductionThe purpose of this preliminary study was to evaluate the diagnostic accuracy of the combined use of 2 cone-beam computed tomographic (CBCT) volumes obtained with the tooth of interest positioned at different orientations in the detection of vertical root fracture (VRF). MethodsThirty single-rooted teeth were divided into 2 main groups (n = 15): control and with VRF. The teeth were individually placed in a phantom composed of a human skull and mandible, which was CBCT scanned in 2 spatial orientations: conventional (with the Frankfurt plane parallel to the floor) and angled acquisition (tilted 90° backward). Also, each tooth was scanned with gutta-percha, a metal post, and without any intracanal material. Three oral radiologists individually evaluated the images resulting from conventional acquisition and verified the presence or absence of VRF (conventional CBCT assessment), setting a score on a 5-point scale. Subsequently, the observers evaluated both images resulting from the conventional and angled acquisitions (combined CBCT assessment). The diagnostic values of the conventional and combined assessments were compared using 2-way analysis of variance with the post hoc Tukey test. The significance level was set at 5% (α = 0.05). ResultsThe combined CBCT assessment showed higher accuracy and sensitivity in the VRF diagnosis of teeth filled with gutta-percha (P < .05). In teeth with a metal post, all diagnostic values were higher in the combined CBCT assessment (P < .05). ConclusionsThis preliminary study suggests that the CBCT-based diagnosis of VRF in teeth with intracanal material was improved when the assessment combines images obtained at 2 orientations.

Effect of digital enhancement on the radiographic assessment of vertical root fractures in the presence of different intracanal materials: an in vitro study.

To evaluate the effect of enhancement tools of intraoral digital radiographs on the assessment of vertical root fracture (VRF) and to quantify the resultant image noise. Thirty single-rooted human teeth (15 control and 15 fractured) were each radiographed in four intracanal conditions: no filling, gutta-percha, metal post, and fiberglass post, totaling 120 original images. Two filters were applied to the original images-Sharpen filter (SF) and Edge Enhancement filter (EE), and brightness and contrast were adjusted in four combinations (B&C1 to 4), resulting in 840 images. Five oral radiologists analyzed the images for VRF detection. Pixel intensity was obtained in two regions from the radiographs. Diagnostic values were calculated and compared by two-way ANOVA, and the SD values of pixel intensity values were compared by one-way ANOVA (α = 0.05). There were no significant differences in accuracy for VRF detection between the experimental groups (p > 0.05). Teeth with metal post presented the lowest sensitivity (p < 0.05) for all experimental conditions, except for SF and EE (p > 0.05). B&C2, B&C3, and B&C4 had higher specificity than SF (p ≤ 0.05) for all intracanal conditions. Analysis of pixel intensity showed that all enhanced images presented statistically significant higher noise compared to those of the original images (p ≤ 0.05). Digital enhancement tools in digital radiography increase image noise; however, they can be used without compromising VRF detection. The use of digital enhancement does not impair the detection of VRF and, therefore, can be applied for this purpose according to the observer preference.

Influence of the Intracanal Material and Metal Artifact Reduction Tool in the Detection of the Second Mesiobuccal Canal in Cone-beam Computed Tomographic Examinations

IntroductionThe aim of this study was to evaluate the influence of different intracanal materials and the metallic artifact reduction (MAR) tool of cone-beam computed tomographic (CBCT) imaging on the detection of the second mesiobuccal (MB2) canal in maxillary first molars. MethodsForty maxillary first molars were selected; half of them had the MB2 canal in the mesiobuccal root confirmed by micro–computed tomographic imaging. All teeth were instrumented, except for the MB2 canal, and filled with gutta-percha, which was passively inserted up to the working length. Each tooth was individually inserted into a dry human skull, and CBCT scans were performed using the OP300 device (Instrumentarium Dental, Tuusula, Finland) with and without the use of the MAR tool. For each scanned tooth, the following intracanal materials were used in the palatal root: gutta-percha, silver palladium, nickel chromium, and cobalt chromium. Five examiners assessed the images for the detection of the MB2 canal using a 5-point scale. The weighted kappa test was applied to evaluate intra- and interexaminer reproducibility. The diagnostic values (sensitivity, specificity, and area under the receiver operating characteristic curve) were calculated in the different groups and compared using 2-way analysis of variance and the Tukey post hoc test. ResultsThe intra- and interobserver agreement ranges for the different conditions were studied. The diagnostic values were not significantly different (P > .05) regardless of the intracanal material and the use of the MAR tool. ConclusionsThe presence of different intracanal materials and MAR activation does not influence CBCT-based detection of MB2 canals.

Influence of tooth position within the field of view on the intensity of cone-beam computed tomographic imaging artifacts when assessing teeth restored with various intracanal materials.

PurposeThis study aimed to quantify the influence of tooth position within the field-of-view (FOV) on cone-beam computed tomography (CBCT) imaging artifacts' intensity when assessing teeth restored with various intracanal materials.Materials and MethodsSeventy single-rooted teeth were divided into 7 groups (10 teeth per group): NiCr post (NC), AgPd post (AP), metal core fiberglass post (MCFG), fiberglass post (FG), anatomical fiberglass post (AFG), fiberglass post cemented with core build-up cement (FGCo), and anatomical fiberglass post cemented with core build-up cement (AFGCo). All posts were cemented using a regular dual-curing resin cement (Allcem), except FGCo and AFGCo which were cemented with a core build-up dual-curing resin cement (AllcemCore). Each tooth was scanned on a CS9000 in 5 positions within the FOV: a central position, anterior horizontal peripheral, peripheral superior, peripheral inferior, and posterior horizontal peripheral position. Hyperdense, hypodense, remaining teeth areas and ROI areas were quantitatively analyzed using ImageJ software.ResultsPosterior horizontal peripheral position increased the intensity of artifacts on FGCo and AFGCo post groups (P<0.05), and specifically the hypodense artifact intensity on FG and AFG post groups (P<0.05). NC and AP groups presented greater intensity of artifacts than any other post groups (P<0.05).ConclusionArtifact intensity increases in the presence of high atomic number materials and when the object is not centered within the FOV. The impact of positioning within the FOV on artifact was greater for fiberglass posts cemented with core build-up dual-curing cement than for metal posts and fiberglass posts cemented with regular dual-curing cement.

Assessment of the Influence of Different Intracanal Materials on the Detection of Root Fracture in Birooted Teeth by Cone-beam Computed Tomography

IntroductionThe aim of this study was to assess 2 cone-beam computed tomographic systems on the detection of artificially induced vertical root fractures (VRFs) and artifact intensity using birooted teeth restored with different intracanal materials. MethodsThe sample consisted of 20 extracted birooted premolars. Root fracture was induced in half of the sample. Seven intracanal material combinations were used in each tooth, 1 at a time: unrestored, gutta-percha, a buccal root with gutta-percha and a lingual root with a fiberglass post, a buccal root with gutta-percha and a lingual root with a metal core fiberglass post, fiberglass posts, metal core fiberglass posts, and NiCr posts. Cone-beam computed tomographic scans were acquired using CS 9000 3D (Carestream Dental Rochester, NY) and OP300 (Instrumentarium Dental Inc, Tuusula, Finland) units. Exposure parameters were fixed at 90 kV and 8 mA. The voxel size and field of view were set at 0.085 mm and 5 × 5 cm for OP300 and 0.076 mm and 5 × 3.75 cm for CS 9000, respectively. Two observers assessed all images using a 5-point confidence scale for VRF detection and a 4-point score for artifact interference. The sensitivity, specificity, accuracy, and area under the receiver operating characteristic curve were compared using 2-way analysis of variance and the Tukey test (α = 0.05). Artifact interference was evaluated by descriptive statistics and the chi-square test. ResultsThere were significant differences between scanners (P > .05) and among the different intracanal material groups (OP300) (P < .05) for specificity. When a metal post was present in both roots, severe artifact interference was observed in all images. ConclusionsCS 9000 3D presented better performance than OP300 on VRF detection of endodontically treated teeth. Unrestored teeth and teeth filled with fiberglass posts were considered the groups with the lowest artifact interference and the highest VRF detection results.

Efficacy of digital radiographic systems in the quality assessment of intracanal materials used for primary teeth

Aim: To evaluate the performance of three digital radiographic systems in the analysis of root canal filling quality using different intracanal materials for primary teeth. Methods: Twenty-five bovine teeth were divided into 5 groups: Calen® combined with iodoform; Calen® combined with zinc oxide; zinc oxide and eugenol; UltraCal®XS, and 2% chlorhexidine combined with Ca(OH)2 + zinc oxide. Periapical radiographs were obtained with the VistaScan, Express, and SnapShot systems. The quality of the images was evaluated objectively (radiopacity) and subjectively (apical sealing and filling homogeneity). As the reference standard, the teeth were scanned with a micro-CT device. Results: Radiopacity differed among the radiographic systems and materials tested. In general, the greatest difference was observed between the Express and VistaScan systems; Calen® combined with iodoform resulted in the highest radiopacity. The radiographic systems did not differ in terms of homogeneity. However, Calen® combined with iodoform differed from the other materials and exhibited the best results. Regarding apical sealing, the SnapShot system and Calen® combined with zinc oxide provided the best results. Conclusion: Direct digital systems show better performance in evaluating the quality of endodontic treatment in primary teeth and should be preferred for this purpose.

Assessment of Cone-beam Computed Tomographic Artifacts from Different Intracanal Materials on Birooted Teeth

IntroductionThis study quantitatively evaluated the type and amount of image artifacts generated by different intracanal materials in birooted teeth scanned at different exposure parameters. MethodsThe sample consisted of 15 birooted premolars. Seven different intracanal material combinations were used in each tooth one at a time:(1) roots without intracanal materials,(2) roots with gutta-percha,(3) a buccal root with gutta-percha and a lingual root with a fiberglass post,(4) a buccal root with gutta-percha and a lingual root with a metal core fiberglass post,(5) buccal and lingual roots with fiberglass posts,(6) buccal and lingual roots with metal core fiberglass posts, and(7) buccal and lingual roots with NiCr metal posts. Cone-beam computed tomographic scans were acquired using a CS 9000 unit (Carestream Dental, Atlanta, GA). An image of each tooth was captured under 5 exposure parameters: 2.5, 4, 6.3, 8, and 12 mA. The voxel size, field of view, and tube voltage were fixed at 0.076 mm, 5 × 3.75 cm, and 75 kV. We assessed each artifact quantitatively using ImageJ's threshold tool (National Institutes of Health, Bethesda, MD) to determine the hypodense and hyperdense artifact areas within 8-bit images extracted from the scans. All analyses were conducted with a 95% confidence level (α <0.05). ResultsThe inferential analysis showed that roots filled with metal posts presented the highest amount of hypodense and hyperdense artifacts, whereas fiberglass post in both roots presented fewer artifacts. All materials presented more hypodense than hyperdense artifact formation. Overall, the low-exposure settings presented fewer artifacts and higher values of preserved dental images. ConclusionsLow-exposure protocols and fiberglass posts presented fewer image artifacts in CBCT scans.

Effect of calcium hydroxide on inflammatory root resorption and ankylosis in replanted teeth compared with other intracanal materials: a review.

Calcium hydroxide (CH) is the gold-standard intracanal dressing for teeth subjected to traumatic avulsion. A common complication after the replantation of avulsed teeth is root resorption (RR). The current review was conducted to compare the effect of CH with that of other intracanal medications and filling materials on inflammatory RR and replacement RR (ankylosis) in replanted teeth. The PubMed and Scopus databases were searched through June 2018 using specific keywords related to the title of the present article. The materials that were compared to CH were in 2 categories: 1) mineral trioxide aggregate (MTA) and endodontic sealers as permanent filling materials for single-visit treatment, and 2) Ledermix, bisphosphonates, acetazolamide, indomethacin, gallium nitrate, and enamel matrix-derived protein (Emdogain) as intracanal medicaments for multiple-visit management of avulsed teeth prior to the final obturation. MTA can be used as a single-visit root filling material; however, there are limited data on its efficacy due to a lack of clinical trials. Ledermix and acetazolamide were comparable to CH in reducing RR. Emdogain seems to be an interesting material, but the data supporting its use as an intracanal medication remain very limited. The conclusions drawn in this study were limited by the insufficiency of clinical trials.

Influence of Tooth Orientation on the Detection of Vertical Root Fracture in Cone-beam Computed Tomography

IntroductionThe purpose of this study was to assess the influence of tooth orientation in relation to the projection plane of the x-rays on the detection of vertical root fracture (VRF) with different filling materials using cone-beam computed tomographic (CBCT) imaging. MethodsThirty single-rooted human teeth were endodontically instrumented, and VRF was induced in half of the sample. The roots were individually placed in the dental socket of a phantom head composed of a dry human skull and mandible, and CBCT images were obtained of each root with the longitudinal axis in 2 orientations: perpendicular and parallel to the projection plane of the x-rays. Also, each root was scanned under 3 filling conditions: without filling material, with gutta-percha, and with a metal post. Radiation doses at specific anatomic regions of the phantom were obtained for the 2 orientations. Five radiologists evaluated all images and rated the fractures on a 5-point scale. The sensitivity, specificity, accuracy, and positive and negative predictive values were calculated. The area under the receiver operating characteristic curve and the dosimetric outcomes for each root orientation and filling material were compared, respectively, with 2-way and 1-way analysis of variance with the post hoc Tukey test (α = 0.05). ResultsThere was no significant difference (P ≥ .05) in the detection of VRF between root orientations regardless of the filling material. Az values were significantly lower (P < .05) in the presence of gutta-percha and a metal post. The root orientation varied the absorbed dose at some anatomic regions. ConclusionsThe orientation of the tooth in relation to the projection plane of the x-rays does not influence the detection of VRF using CBCT imaging irrespective of the intracanal material.

Optimization of Tube Current in Cone-beam Computed Tomography for the Detection of Vertical Root Fractures with Different Intracanal Materials

IntroductionThere is no consensus about the accuracy of cone-beam computed tomography (CBCT) for detecting vertical root fractures (VRFs), nor is there certainty about the isolated effect of different tube current parameters on the diagnosis of VRF through CBCT scans. This study aimed to evaluate how tube current affects the detection of VRF on CBCT examinations in the absence of intracanal materials and in the presence of gutta-percha (GP) and metal (MP) or fiberglass (FP) intracanal posts. MethodsThe sample consisted of 320 CBCT scans of tooth roots with and without VRF divided into 8 groups: no fracture/no intracanal material; no fracture + GP; no fracture + MP; no fracture + FP; fracture/no intracanal material; fracture + GP; fracture + MP; fracture + FP. The scans were acquired with an OP300 unit using 4 different milliamperes (4 mA, 8 mA, 10 mA, 13 mA). Five oral radiologists analyzed the images. The area under the receiver operating characteristic curve (Az), sensitivity, specificity, positive and negative predictive values, and interobserver agreement were calculated. ResultsDiagnostic performance for the different milliamperes tested was similar for teeth without root filling materials or with FP. Teeth with GP and MP showed the highest Az values for 8 mA and 10 mA, respectively. For teeth with MP, specificity was significantly higher when 10 mA was used. ConclusionsFor teeth without root filling materials or with FP, the use of a reduced milliampere does not seem to influence the detection of VRF in a significant manner. For teeth with GP and MP, an increased milliampere may lead to increased diagnostic performance.

Influence of Intracanal Materials in Vertical Root Fracture Pathway Detection with Cone-beam Computed Tomography

IntroductionInvestigating the vertical root fracture (VRF) pathway under different clinical scenarios may help to diagnose this condition properly. We aimed to determine the capability and intrareliability of VRF pathway detection through cone-beam computed tomographic (CBCT) imaging as well as analyze the influence of different intracanal and crown materials. MethodsVRFs were mechanically induced in 30 teeth, and 4 clinical situations were reproduced in vitro: no filling, gutta-percha, post, and metal crown. A Prexion (San Mateo, CA) 3-dimensional tomographic device was used to generate 104 CBCT scans. The VRF pathway was determined by using landmarks in the Avizo software (Version 8.1; FEI Visualization Sciences Group, Burlington, MA) by 1 observer repeated 3 times. Analysis of variance and post hoc tests were applied to compare groups. ResultsIntrareliability demonstrated an excellent agreement (intraclass correlation coefficient mean = 0.93). Descriptive analysis showed that the fracture line measurement was smaller in the post and metal crown groups than in the no-filling and gutta-percha groups. The 1-way analysis of variance test found statistically significant differences among the groups measurements. The Bonferroni correction showed statistically significant differences related to the no-filling and gutta-percha groups versus the post and metal crown groups. ConclusionsThe VRF pathway can be accurately detected in a nonfilled tooth using limited field of view CBCT imaging. The presence of gutta-percha generated a low beam hardening artifact that did not hinder the VRF extent. The presence of an intracanal gold post made the fracture line appear smaller than it really was in the sagittal images; in the axial images, a VRF was only detected when the apical third was involved. The presence of a metal crown did not generate additional artifacts on the root surface compared to the intracanal gold post by itself.

An in vitro study: Evaluation of intracanal calcium hydroxide removal with different file systems

Background: Calcium hydroxide (Ca(OH)2) is the most commonly used intracanal material; it needs to be removed in entirety before obturation. Several techniques have been used for the same including use of various hand and rotary files. Aim: This study was carried out to compare the efficacy of Hand K files and single and multiple rotary file system in removal of Ca(OH)2. Methodology: Distobuccal root of 45 maxillary molars were selected on the basis of specified inclusion and exclusion criteria. They were divided into three groups - Group 1 (H and K file), Group 2 (HERO Shaper), and Group 3 (One Shape). Biomechanical preparation (BMP) was carried out as per the manufacturer's instructions; 2.5% sodium hypochlorite was used as the irrigant and 17% ethylenediaminetetraacetic acid as the penultimate irrigant. Ca(OH)2powder was mixed with normal saline to obtain a paste; canals were filled with this paste using a Lentulo spiral and were sealed. After 7 days, Ca(OH)2was removed, using the same file system as that used for BMP. Samples were sectioned longitudinally and evaluated under a stereomicroscope. Statistical Analysis: Statistical analysis of the obtained data was carried out using one-way analysis of variance test. Results: HERO Shaper displayed better removal of Ca(OH)2than One Shape and Hand K file. Moreover, removal was better in the middle third of canal than apical third. Conclusion: Multiple rotary file system (HERO Shaper) is more effective in removal of Ca(OH)2than the single file system (One Shape)

Influence of exposure parameters on the detection of simulated root fractures in the presence of various intracanal materials.

To investigate how the exposure parameters used when producing CBCT scans affect diagnostic accuracy when detecting simulated vertical root fractures and how various filling materials affect image quality. A total of 160 extracted single-rooted human teeth were divided into four groups based on the materials within the root canals: unrestored, gutta-percha, metallic post and fibreglass post. Half of the sample of each group was selected for the induction of vertical root fractures. Each tooth was placed in an empty socket of a dry skull which was scanned on a CBCT unit (9000 3D scanner; Kodak Dental Systems, Carestream Health, Rochester, NY, USA) using the following exposure parameters: 74kV/12mA; 74kV/10mA; 74kV/8mA; 74kV/6.3mA; 70kV/12mA; 70kV/10mA; 70kV/8mA; 70kV/6.3mA. Two observers assessed all images using a 5-point confidence scale for fracture detection and a 4-point score for the presence of artefacts. Sensitivity, specificity, accuracy and area under ROC curve were compared by two-way anova and Tukey's test. Artefact formation was evaluated by descriptive statistics. There were no significant differences in the sensitivity (P=0.370), specificity (P=0.660), accuracy (P=0.084) and area under the ROC curve (P=0.674) values amongst the various exposure parameters within the same group. There were some significant differences when the groups were compared for each intracanal material. The sensitivity and accuracy of the group containing metallic posts were significantly lower than the unrestored and fibreglass post groups (P≤0.017). The variations in exposure parameters did not interfere with the diagnosis of vertical root fractures, independent of the root canal restorative status. Metallic posts were associated with greater artefact formation and compromised the diagnostic performance. It is possible to decrease the kVp/mA settings to reduce the probability of biological effects due to radiation, without losing diagnostic accuracy.