Intervertebral Ligaments Research Articles

Discussion of the Current Treatment Methods for Degenerative Lumbar Spondylolisthesis

Degenerative spondylolisthesis (DS) is caused by degeneration that causes the lumbar vertebral body of the diseased segment to be displaced relative to the lower vertebral body, which is usually forward, and is not accompanied by pedicle fracture or defect, also known as "pseudospondylolisthesis". DS is more common in the L4/L5 segment, followed by the L3/L4 and L5/S1 segments, and is mostly mild slippage of the first and second degrees [2-4]. At present, the pathogenesis of DS is not fully understood, and it may be related to age-related degeneration of supporting structures, such as intervertebral discs, facet joints, bones, ligaments, facet capsule, and paravertebral muscles. In addition, the decrease in estrogen in women is also associated with the development of DS [1]. Clinically, DS is characterized by recurrent symptoms such as low back and leg pain, numbness of the lower limbs, intermittent claudication, and in severe cases, colorectal symptoms may occur [4].

Хроническая боль в спине: от патогенеза к адекватной фармакотерапии

Chronic back pain is an actual problem of clinical medicine, the pathogenesis of which includes peripheral nociceptive stimulation, peripheral and/or central inflammation, abnormality of the central pain modulation network and mixed onset of various pathological mechanisms. Sources of nociceptive signal generation include the intervertebral disc, muscles, fasciae, facet joints, sacroiliac joints, pubic symphysis, ligaments and joint capsule, and other structures that contain nociceptors. Any event that causes tissue degeneration activates a massive inflammatory response that infiltrates the MPD, joints, muscles, fascia and other tissues, stimulates nociceptive receptors to produce inflammatory substances, which directly damages the nerve root and causes pain. Simultaneously, the damaged MPD and endplate stimulate pathological and invasive growth and proliferation of vessels and nerves in the MPD. Increasing evidence also suggests that systemic inflammation plays a crucial role in the pathogenesis of chronic back pain. The central mechanism of back pain involves altered sensory processing in the brain. Dysfunction of the descending pain modulation system results in amplification of pain information in the brain. Since monotherapy for chronic back pain is not optimal, it is necessary to promote the comprehensive treatment recommended by current international clinical guidelines and it is reasonable to combine several therapies to improve the clinical effect of therapy. The combination of Tizanidine and Mirtazapine is an effective pharmacotherapy for chronic back pain. KEYWORDS: Chronic back pain, pathogenesis of dorsalgia, Tizanidine, Mirtazapine

Effect of cement volume on biomechanical response of a spine segment treated with a PEEK polymer implant: a finite element comparative study with vertebroplasty.

In the current study, a 3D finite element study was performed to investigate the biomechanical response of an osteoporotic spine segment treated with a novel transpedicular implant (V-STRUT©, Hyprevention, France) made of PEEK (polyetheretherketone) material combined with either injections of 2, 3, 4, 5 and 6 cc of cement. The objective was to assess numerically the biomechanical performance of the implant in combination with different doses of the injected bone cement and to compare its performance with the gold standard vertebroplasty (VP) technique. A female (69yo) was selected and a 3D finite element model of an osteoporotic spine segment was built based on a Computed Tomography (CT) scan performed from T12 to L2 with corresponding intervertebral discs and ligaments. A heterogeneous distribution of bone material properties was assigned to the bone using grey scale levels. Bilateral ellipsoid geometries of the inserted cement were retained for the V-STRUT and VP models based on experimental observation performed on different patients treated with the V-STRUT device. The current study demonstrated an optimal dose of 4 cc of bilaterally injected cement for the V-STRUT and VP techniques to restore the treated segment and confirmed that the V-STRUT device in combination with bone cement is superior to VP alone in establishing the normal stiffness and in reducing the applied stress to the immediately adjacent vertebral levels.

Finite element analysis of a new preoperative traction for cervical kyphosis: suspensory traction

A finite element model of cervical kyphosis was established to analyze the stress of cervical spine under suspensory traction and to explore the mechanism and effect of it. A patient with typical cervical kyphosis (C2-C5) underwent CT scan imaging, and 3D slicer was used to reconstruct the C2 to T2 vertebral bodies. The reconstructed data was imported into Hypermesh 2020 and Abaqus 2017 for meshing and finite element analysis. The changes of the kyphotic angle and the von Mises stress on the annulus fibrosus of each intervertebral disc and ligaments were analyzed under suspensory traction conditions. With the increase of suspensory traction weight, the overall kyphosis of cervical spine showed a decreasing trend. The correction of kyphosis was mainly contributed by the change of kyphotic segments. The kyphotic angle of C2-C5 was corrected from 45° to 13° finally. In cervical intervertebral discs, the stress was concentrated to anterior and posterior part, except for C4-5. The stress of the anterior longitudinal ligament (ALL) decreased from the rostral to the caudal, and the high level von Mises stress of the kyphotic segments appeared at C2-C3, C3-C4, and C4-C5. The roles of the other ligaments were not obvious. The kyphotic angle was significantly reduced by the suspensory traction. Shear effect due to the high von Mises stress in the anterior and posterior parts of annulus fibrosus and the tension on the anterior longitudinal ligament play a role in the correction of cervical kyphosis.Graphical

Finite element analysis of the cervical spine: dynamic characteristics and material property sensitivity study

The study aimed to investigate the dynamic characteristics of the cervical spine and determine the effect of the material properties of the cervical spinal components on it. A finite element model of the head-cervical spine was developed based on CT scan data, and the first six orders of modes (e.g. flexion-extension, lateral bending, and vertical, etc.) were verified by experimental and simulation studies. The material sensitivity study was conducted by varying elasticity modulus of cervical hard tissues (cortical bone, cancellous bone, endplates, and posterior elements) and soft tissues (intervertebral disc and ligaments). The results showed that increasing the elastic modulus of ligaments by 4 times increased the natural frequency by 77%, while increasing that of cancellous bone by 4 times only increased the natural frequency by 6%. In the axial mode, the cervical spine had not only axial deformation but also anterior-posterior deformation, with the largest deformation located at the intervertebral disc C6-C7. Decreasing the elastic modulus of a component in soft tissues by 80% increased modal displacement by up to 62%. The material properties of the intervertebral discs and ligaments had opposite effects on the modal displacement and deformation of the cervical spine. Low cervical discs were more susceptible to injury in a vertical vibration environment. Cervical spine dynamics were more sensitive to soft tissue material properties than to hard tissue material properties. Disc degeneration could reduce the range of vibratory motion of the cervical spine, thereby reducing the ability of the cervical spine to cushion head impacts.

Muscle-driven forward dynamic active hybrid model of the lumbosacral spine: combined FEM and multibody simulation.

Most spine models belong to either the musculoskeletal multibody (MB) or finite element (FE) method. Recently, coupling of MB and FE models has increasingly been used to combine advantages of both methods. Active hybrid FE-MB models, still rarely used in spine research, avoid the interface and convergence problems associated with model coupling. They provide the inherent ability to account for the full interplay of passive and active mechanisms for spinal stability. In this paper, we developed and validated a novel muscle-driven forward dynamic active hybrid FE-MB model of the lumbosacral spine (LSS) in ArtiSynth to simultaneously calculate muscle activation patterns, vertebral movements, and internal mechanical loads. The model consisted of the rigid vertebrae L1-S1 interconnected with hyperelastic fiber-reinforced FE intervertebral discs, ligaments, facet joints, and force actuators representing the muscles. Morphological muscle data were implemented via a semi-automated registration procedure. Four auxiliary bodies were utilized to describe non-linear muscle paths by wrapping and attaching the anterior abdominal muscles. This included an abdominal plate whose kinematics was optimized using motion capture data from upper body movements. Intra-abdominal pressure was calculated from the forces of the abdominal muscles compressing the abdominal cavity. For the muscle-driven approach, forward dynamics assisted data tracking was used to predict muscle activation patterns that generate spinal postures and balance the spine without prescribing accurate spinal kinematics. During calibration, the maximum specific muscle tension and spinal rhythms resulting from the model dynamics were evaluated. To validate the model, load cases were simulated from -10° extension to +30° flexion with weights up to 20kg in both hands. The biomechanical model responses were compared with in vivo literature data of intradiscal pressures, intra-abdominal pressures, and muscle activities. The results demonstrated high agreement with this data and highlight the advantages of active hybrid modeling for the LSS. Overall, this new self-contained tool provides a robust and efficient estimation of LSS biomechanical responses under in vivo similar loads, for example, to improve pain treatment by spinal stabilization therapies.

Establishment of a Finite Element Model for the Cervical Spine with Spring Muscle Units

The accelerated pace of modern life has led to an increasing number of people suffering from cervical spondylosis. Traditional research methods for cervical spondylosis are limited by ethical and material constraints, but finite element models can effectively address these issues during the research process. In this paper, a finite element model of C0-C7 vertebrae was reconstructed based on CT scan data, and finite element models of intervertebral discs, ligaments, muscles, and other anatomical structures were added and combined. The reconstructed cervical spine finite element model is highly realistic in shape and has good similarity, making it suitable for cervical spondylosis research.

Effect of neglecting passive spinal structures: a quantitative investigation using the forward-dynamics and inverse-dynamics musculoskeletal approach.

Purpose: Inverse-dynamics (ID) analysis is an approach widely used for studying spine biomechanics and the estimation of muscle forces. Despite the increasing structural complexity of spine models, ID analysis results substantially rely on accurate kinematic data that most of the current technologies are not capable to provide. For this reason, the model complexity is drastically reduced by assuming three degrees of freedom spherical joints and generic kinematic coupling constraints. Moreover, the majority of current ID spine models neglect the contribution of passive structures. The aim of this ID analysis study was to determine the impact of modelled passive structures (i.e., ligaments and intervertebral discs) on remaining joint forces and torques that muscles must balance in the functional spinal unit. Methods: For this purpose, an existing generic spine model developed for the use in the demoa software environment was transferred into the musculoskeletal modelling platform OpenSim. The thoracolumbar spine model previously used in forward-dynamics (FD) simulations provided a full kinematic description of a flexion-extension movement. By using the obtained in silico kinematics, ID analysis was performed. The individual contribution of passive elements to the generalised net joint forces and torques was evaluated in a step-wise approach increasing the model complexity by adding individual biological structures of the spine. Results: The implementation of intervertebral discs and ligaments has significantly reduced compressive loading and anterior torque that is attributed to the acting net muscle forces by -200% and -75%, respectively. The ID model kinematics and kinetics were cross-validated against the FD simulation results. Conclusion: This study clearly shows the importance of incorporating passive spinal structures on the accurate computation of remaining joint loads. Furthermore, for the first time, a generic spine model was used and cross-validated in two different musculoskeletal modelling platforms, i.e., demoa and OpenSim, respectively. In future, a comparison of neuromuscular control strategies for spinal movement can be investigated using both approaches.

37. Anatomic contributions to the stability of the L5-S1 segment under combined shear and compression: implications to isthmic/lytic spondylolisthesis

37. Anatomic contributions to the stability of the L5-S1 segment under combined shear and compression: implications to isthmic/lytic spondylolisthesis

A Baseline for Skeletal Investigations in Medaka (Oryzias latipes): The Effects of Rearing Density on the Postcranial Phenotype.

Oryzias latipes is increasingly used as a model in biomedical skeletal research. The standard approach is to generate genetic variants with particular skeletal phenotypes which resemble skeletal diseases in humans. The proper diagnosis of skeletal variation is key for this type of research. However, even laboratory rearing conditions can alter skeletal phenotypes. The subject of this study is the link between skeletal phenotypes and rearing conditions. Thus, wildtype medaka were reared from hatching to an early juvenile stage at low (LD: 5 individuals/L), medium (MD: 15 individuals/L), and high (HD: 45 individuals/L) densities. The objectives of the study are: (I) provide a comprehensive overview of the postcranial skeletal elements in medaka; (II) evaluate the effects of rearing density on specific meristic counts and on the variability in type and incidence of skeletal anomalies; (III) define the best laboratory settings to obtain a skeletal reference for a sound evaluation of future experimental conditions; (IV) contribute to elucidating the structural and cellular changes related to the onset of skeletal anomalies. The results from this study reveal that rearing densities greater than 5 medaka/L reduce the animals’ growth. This reduction is related to decreased mineralization of dermal (fin rays) and perichondral (fin supporting elements) bone. Furthermore, high density increases anomalies affecting the caudal fin endoskeleton and dermal rays, and the preural vertebral centra. A series of static observations on Alizarin red S whole mount-stained preural fusions provide insights into the etiology of centra fusion. The fusion of preural centra involves the ectopic formation of bony bridges over the intact intervertebral ligament. An apparent consequence is the degradation of the intervertebral ligaments and the remodeling and reshaping of the fused vertebral centra into a biconoid-shaped centrum. From this study it can be concluded that it is paramount to take into account the rearing conditions, natural variability, skeletal phenotypic plasticity, and the genetic background along with species-specific peculiarities when screening for skeletal phenotypes of mutant or wildtype medaka.

The Effect of Preoperative Cervical Spondylosis on Heterotopic Ossification After Cervical Disc Replacement.

Retrospective cohort study. This study aimed to explore the effect of preoperative cervical spondylosis on the heterotopic ossification (HO) formation in different locations after cervical disc replacement (CDR). The degree of preoperative cervical spondylosis was evaluated radiologically, including the intervertebral disc, uncovertebral joints, facet joints and ligaments. The effects of cervical spondylosis on the HO formation after CDR were analyzed according to the location of HO. Multivariate logistic regression was performed to identify the independent factors. 149 patients with a total of 196 arthroplasty segments were involved in this study. HO, anterior HO (AHO), and posterior HO (PHO) developed in 59.69%, 22.96%, and 41.84% levels, respectively. The significant factors in univariate analysis for PHO after CDR included the disc height loss, anterior osteophytes, preoperative uncovertebral joint osteophytes and facet joint degeneration. The incidence of adjacent segment degeneration (ASD) was significantly higher in the PHO group compared to that without PHO at the last follow-up (P = .003). The disc height loss in high-grade HO was significantly more than that in low-grade group (P = .039). Multivariate analysis identified disc height loss was the only independent factor for PHO (P = .009). No significant degenerative factors related to the formation of AHO were found. Preoperative cervical spondylosis predominantly affected the HO formation in the posterior disc space after CDR. The disc height loss was an independent risk factor for PHO formation. Rigorous criteria for the extent of preoperative disc height loss should be used when selecting appropriate candidates for CDR.

The Effect of a Rehabilitation Curriculum for Developing the Muscles Supporting the Intervertebral Ligaments for People with Lumbar Pain for the Quads

Today, sport is one of the manifestations of the civilization of peoples, as the development of sport accompanied the meaning of being an athlete. Therefore, studying the direct and side effects on the health of the athlete and how to avoid these influences to overwhelm the athlete and in turn affect his artistic performance and The researcher used the experimental method as it is the closest method to solving the research problem and The research community was chosen in a deliberate way and represented the community with weightlifting players for Baghdad clubs for the season (2021) AD and The researcher concluded The rehabilitation curriculum exercises contributed positively to the development of the muscles working on the spine and the lumbar region in particular and The rehabilitation curriculum exercises played an active role in reducing the degree of pain.

Bi-allelic premature truncating variants in LTBP1 cause cutis laxa syndrome

Latent transforming growth factor β (TGFβ)-binding proteins (LTBPs) are microfibril-associated proteins essential for anchoring TGFβ in the extracellular matrix (ECM) as well as for correct assembly of ECM components. Variants in LTBP2, LTBP3, and LTBP4 have been identified in several autosomal recessive Mendelian disorders with skeletal abnormalities with or without impaired development of elastin-rich tissues. Thus far, the human phenotype associated with LTBP1 deficiency has remained enigmatic. In this study, we report homozygous premature truncating LTBP1 variants in eight affected individuals from four unrelated consanguineous families. Affected individuals present with connective tissue features (cutis laxa and inguinal hernia), craniofacial dysmorphology, variable heart defects, and prominent skeletal features (craniosynostosis, short stature, brachydactyly, and syndactyly). Invitro studies on proband-derived dermal fibroblasts indicate distinct molecular mechanisms depending on the position of the variant in LTBP1. C-terminal variants lead to an altered LTBP1 loosely anchored in the microfibrillar network and cause increased ECM deposition in cultured fibroblasts associated with excessive TGFβ growth factor activation and signaling. In contrast, N-terminal truncation results in a loss of LTBP1 that does not alter TGFβ levels or ECM assembly. Invivo validation with two independent zebrafish lines carrying mutations in ltbp1 induce abnormal collagen fibrillogenesis in skin and intervertebral ligaments and ectopic bone formation on the vertebrae. In addition, one of the mutant zebrafish lines shows voluminous and hypo-mineralized vertebrae. Overall, our findings in humans and zebrafish show that LTBP1 function is crucial for skin and bone ECM assembly and homeostasis.

Peripheral and Central Pathological Mechanisms of Chronic Low Back Pain: A Narrative Review.

Chronic low back pain (CLBP), lasting >3 months, is the end result of multiple pathogenic factors. Unfortunately, little is known about CLBP pathogenesis, which limits its advancements in clinical therapy and disease management. This paper summarizes the known pathological axes of CLBP, involving both peripheral and central systems. In particular, this paper details injurious nerve stimulation, inflammation-induced peripheral pathway, and central sensitization. Lumbar components, such as intervertebral disc (IVD), facet joints, muscles, fascia, ligaments, and joint capsules, contain pain receptors called nociceptors. Degeneration of the aforementioned lumbar components activates inflammatory pathways, which can directly damage nerves, lower nociceptor threshold to fire action potentials (AP), and cause pain. Additionally, damaged lumbar IVDs and endplates can also lead to the pathologic invasion of nerve growth and innervation, followed by the compression of herniated IVDs on nerve roots, thereby causing traumatic neuropathic pain. The central mechanism of CLBP involves alteration of the sensory processing of the brain and malfunction of the descending pain modulatory system, which facilitates pain amplification in the center nervous system (CNS). Lastly, abnormalities in the brain biochemical metabolism, activation of glial cells, and subsequent inflammation also play important roles in CLBP development. Taken together, inflammation plays an important role in both peripheral and central sensitization of CLBP. Due to the heterogeneity of CLBP, its pathological mechanism remains complex and difficult to understand. Therefore, it is a worthy field for future research into the subcomponents of CLBP pathogenesis, in order to distinguish the specific form of the disease, identify its origins, and develop corresponding highly effective comprehensive therapy against CLBP.

Calibration and validation of a novel hybrid model of the lumbosacral spine in ArtiSynth-The passive structures.

In computational biomechanics, two separate types of models have been used predominantly to enhance the understanding of the mechanisms of action of the lumbosacral spine (LSS): Finite element (FE) and musculoskeletal multibody (MB) models. To combine advantages of both models, hybrid FE-MB models are an increasingly used alternative. The aim of this paper is to develop, calibrate, and validate a novel passive hybrid FE-MB open-access simulation model of a ligamentous LSS using ArtiSynth. Based on anatomical data from the Male Visible Human Project, the LSS model is constructed from the L1-S1 rigid vertebrae interconnected with hyperelastic fiber-reinforced FE intervertebral discs, ligaments, and facet joints. A mesh convergence study, sensitivity analyses, and systematic calibration were conducted with the hybrid functional spinal unit (FSU) L4/5. The predicted mechanical responses of the FSU L4/5, the lumbar spine (L1-L5), and the LSS were validated against literature data from in vivo and in vitro measurements and in silico models. Spinal mechanical responses considered when loaded with pure moments and combined loading modes were total and intervertebral range of motions, instantaneous axes and centers of rotation, facet joint contact forces, intradiscal pressures, disc bulges, and stiffnesses. Undesirable correlations with the FE mesh were minimized, the number of crisscrossed collagen fiber rings was reduced to five, and the individual influences of specific anatomical structures were adjusted to in vitro range of motions. Including intervertebral motion couplings for axial rotation and nonlinear stiffening under increasing axial compression, the predicted kinematic and structural mechanics responses were consistent with the comparative data. The results demonstrate that the hybrid simulation model is robust and efficient in reproducing valid mechanical responses to provide a starting point for upcoming optimizations and extensions, such as with active skeletal muscles.

Vertebral column adaptations in juvenile Atlantic salmon Salmo salar, L. as a response to dietary phosphorus

Deficiency in dietary phosphorus (P) is considered as a nutritional risk factor for the development of vertebral column deformities in farmed Atlantic salmon Salmo salar, L. This mono-factorial study examines how 11-week deficiency and excess of dietary P influence the structure and microstructure of the vertebral bodies in juvenile, freshwater stages of Atlantic salmon. Animals were fed continuously with three diets containing different levels of total P (tP) and soluble P (sP), respectively: low P (LP) = 6.8 g/kg tP, 3.5 g/kg sP, regular P (RP) = 10.0 g/kg tP, 5.6 g/kg sP, and high P (HP) = 13.0 g/kg tP, 9.3 g/kg sP. Animals were analysed for plasma and bone mineral content, vertebral column deformities (x-ray), vertebral centra stiffness, bone mineralisation pattern and vertebral body microanatomy (cells and connective tissue structures). A low (background) level of deformities was observed on a gross morphological level but no increase and no specific type of vertebral column deformity was associated with either of the three groups. While feed intake was comparable among all diet groups animals fed LP showed a 50% reduction in total calcium (Ca) and P content in abdominal vertebrae and opercula. Regular P and HP animals showed similar levels of total Ca and P in abdominal vertebrae and opercula. Animals in all diet groups showed well-developed vertebral bodies. Low P animals had vertebral centra, neural and haemal arches with large areas of non-mineralised bone. Vertebral centra stiffness in LP animals was reduced accordingly. Regular P and HP animals showed comparable values for vertebral centra stiffness. Non-mineralised vertebral body end plates of LP animals developed a slight inward bending and intervertebral ligaments increased in length and thickness. The cellular and extracellular components of the intervertebral joints remained intact without structural alterations that would indicate the development of vertebral centra compression or fusion. Animals from all three diet groups showed active osteoblasts at the vertebral body growth zone. Despite the three-fold decline in plasma inorganic P in LP animals growth continued at the same rate as in RP and HP animals. It is discussed whether the use of a P-reduced diet under a continuous feeding regime can maintain growth without adverse effects for animal health and welfare. This study further discusses that a HP diet relative to an RP diet has no beneficial effect concerning bone formation, bone mineralisation, growth and prevention of vertebral centra deformities in Atlantic salmon parr.

Structure of Lumbar Intervertebral Foraminal Ligaments Based on 3-Dimensional Reconstruction Through Ultrathin Cryomilling of a Human Cadaver

This study aimed to assess the feasibility of using the 3-dimensional (3-D) reconstruction technique based on ultrathin cryomilling to show the lumbar intervertebral foraminal ligaments in situ. Cryomilling was performed on an embalmed human cadaver to acquire successive cross-sectional images. In each of the images, the boundaries of lumbar intervertebral foraminal ligaments and their adjacent structures were outlined, labeled, and reconstructed for 3-D modeling. The morphology, attachments, and spatial orientation of ligaments were described. A total of 9 ligaments in 10 lumbar intervertebral foramina (IVFs) were identified and reconstructed. These ligaments can be divided into 5 types. The IVFs were divided into 2 or 3 main portions by the first 4 types of ligaments (transforaminal ligaments, corporotransverse ligaments, "reticular" ligaments, and "Y-shaped" ligaments). The radiating ligaments (the fifth type of ligaments) attached to the surrounding structures of the IVF and were connected directly to the nerve root sleeves. Although there was no indication of neurovascular compromise in this normal specimen, these ligaments limit the space within the bony IVF such that under certain pathologic conditions (e.g., inflammation), their presence would make neurovascular compression more likely than if they were absent. The 3-D reconstruction technique based on ultrathin cryomilling can effectively show the lumbar intervertebral foraminal ligaments and their anatomical characteristics in situ, providing a new way to clarify the relationships between these ligaments and their adjacent structures.

Physical Therapy in Cervical Discopathy. Clinical study

Introduction: Cervical pain syndromes constitute a dif f i cult diagnostic and therapeutic problem. Their main causes include abnormal load, microtrauma, and damage to intervertebral discs, joint capsules, ligaments, and muscles. Aim: To assess the ef f ects of physical therapy on pain, range of spinal mobility, and quality of life in patients with cervical discopathy. Materials and methods: The study assessed a group of 31 patients, including 16 women and 15 men, aged 26 to 65 years, who had been diagnosed with discopathy at the C5-6 and C6-7 level. The patients underwent 3-week physical therapy with electrotherapy, ultrasound therapy, laser therapy and kinesiotherapy. Results: The physical therapy used in study patients improved their spinal mobility, had a positive inf l uence on the subjective feeling of pain, reducing or eliminating it completely, and allowed the patients to return to normal everyday functioning. Conclusions: 1. Cervical pain syndromes constitute a dif f i cult diagnostic and therapeutic problem. 2. The physical therapy used in study patients resulted in a pain reduction and improved their spinal mobility and quality of life.

Prediction of Neural Space Narrowing and Soft Tissue Injury of the Cervical Spine Concerning Head Restraint Arrangements in Traffic Collisions

Common quantitative assessments of neck injury criteria do not predict anatomical neck injuries and lack direct relations to design parameters of whiplash-protection systems. This study aims to provide insights into potential soft tissue-level injury sites based on the interactions developed in-between different anatomical structures in case of a rear-end collision. A detailed finite element human model has exhibited an excellent biofidelity when validated against volunteer impacts. Three head restraint arrangements were simulated, predicting both the kinematic response and the anatomical pain source at each arrangement. Head restraint’s contribution has reduced neck shear and head kinematics by at least 70 percent, minimized pressure gradients acting on ganglia and nerve roots less than half. Posterior column ligaments were the most load-bearing components, followed by the lower intervertebral discs and upper capsular ligaments. Sprain of the interspinous ligamentum flavum at early stages has caused instability in the craniovertebral structure causing its discs and facet joints to be elevated compressive loads. Excessive hyperextension motion, which occurred in the absence of the head restraint, has promoted a stable avulsion teardrop fracture of the fourth vertebral body’s anteroinferior aspect and rupture the anterior longitudinal ligament. The observed neck injuries can be mathematically related to head–torso relative kinematics. These relations will lead to the development of a comprehensive neck injury criterion that can predict the injury level. This, in turn, will impose a significant impact on the design processes of vehicle anti-whiplash safety equipment.

Comprehensive Evaluation of Accessory Rod Position, Rod Material and Diameter, Use of Cross-connectors, and Anterior Column Support in a Pedicle Subtraction Osteotomy Model: Part I: Effects on Apical Rod Strain: An In Vitro and In Silico Biomechanical Study.

In silico finite element study. The aim of this study was to evaluate the effect of six construct factors on apical rod strain in an in silico pedicle subtraction osteotomy (PSO) model: traditional inline and alternative Ames-Deviren-Gupta (ADG) multi-rod techniques, number of accessory rods (three- vs. four-rod), rod material (cobalt-chrome [CoCr] or stainless steel [SS] vs. titanium [Ti]), rod diameter (5.5 vs. 6.35 mm), and use of cross-connectors (CC), or anterior column support (ACS). Rod fracture following lumbar PSO is frequently reported. Clinicians may modulate reconstructs with multiple rods, rod position, rod material and diameter, and with CC or ACS to reduce mechanical demand or rod contouring. A comprehensive evaluation of these features on rod strain is lacking. A finite element model (T12-S1) with intervertebral discs and ligaments was created and validated with cadaveric motion data. Apical rod strain of primary and accessory rods was collected for 96 constructs across all six construct factors, and normalized to the Ti two-rod control. Regardless of construct features, CoCr and SS material reduced strain across all rods by 49.1% and 38.1%, respectively; increasing rod diameter from 5.5 mm to 6.35 mm rods reduced strain by 32.0%. Use of CC or lumbosacral ACS minimally affected apical rod strain (<2% difference from constructs without CC or ACS). Compared to the ADG technique, traditional inline reconstruction reduced primary rod strain by 32.2%; however, ADG primary rod required 14.2° less rod contouring. The inline technique produced asymmetrical loading between left and right rods, only when three rods were used. The number of rods and position of accessory rods affected strain distribution on posterior fixation. Increasing rod diameter and using CoCr rods was most effective in reducing rod strain. Neither CC nor lumbosacral ACS affected apical rod strain. N/A.