Intersubunit Disulfide Bridge Research Articles

Rigidity of the Subunit Interfaces of the Trimeric Glutamate Transporter GltT During Translocation

Glutamate transporters are trimeric membrane proteins in which each protomer contains a separate translocation path. To determine whether structural rearrangements take place at the subunit interfaces during transport, intersubunit disulfide bridges were introduced in the bacterial transporter GltT. None of the intersubunit cross-links, which had been designed across the entire interface, affected the glutamate transport activity, indicating that the subunit interfaces are rigid during turnover.

Reversible Inhibition of the Fusion Activity of Measles Virus F Protein by an Engineered Intersubunit Disulfide Bridge

In search of target sites for the development of paramyxovirus inhibitors, we have engineered disulfide bridges to introduce covalent links into the prefusion F protein trimer of measles virus. F-Edm-452C/460C, predicted to bridge head and stalk domains of different F monomers, shows a high degree of proteolytic maturation and surface expression, predominantly as stable, dithiothreitol-sensitive trimers, but no fusion activity. Reduction of disulfide bridges partially restores activity. These findings underscore the importance of reversible intersubunit interactions between the stalk and head domains for F activity. Noncovalent small molecules mimicking this behavior may constitute a potent strategy for preventing paramyxovirus entry.

Structural Rearrangements between Portal Protein Subunits Are Essential for Viral DNA Translocation

Transport of DNA into preformed procapsids is a general strategy for genome packing inside virus particles. In most viruses, this task is accomplished by a complex of the viral packaging ATPase with the portal protein assembled at a specialized vertex of the procapsid. Such molecular motor translocates DNA through the central tunnel of the portal protein. A central question to understand this mechanism is whether the portal is a mere conduit for DNA or whether it participates actively on DNA translocation. The most constricted part of the bacteriophage SPP1 portal tunnel is formed by twelve loops, each contributed from one individual subunit. The position of each loop is stabilized by interactions with helix alpha-5, which extends into the portal putative ATPase docking interface. Here, we have engineered intersubunit disulfide bridges between alpha-5s of adjacent portal ring subunits. Such covalent constraint blocked DNA packaging, whereas reduction of the disulfide bridges restored normal packaging activity. DNA exit through the portal in SPP1 virions was unaffected. The data demonstrate that mobility between alpha-5 helices is essential for the mechanism of viral DNA translocation. We propose that the alpha-5 structural rearrangements serve to coordinate ATPase activity with the positions of portal tunnel loops relative to the DNA double helix.

X‐ray crystallographic analysis of the sulfur carrier protein SoxY from Chlorobium limicola f. thiosulfatophilum reveals a tetrameric structure

Dissimilatory oxidation of thiosulfate in the green sulfur bacterium Chlorobium limicola f. thiosulfatophilum is carried out by the ubiquitous sulfur-oxidizing (Sox) multi-enzyme system. In this system, SoxY plays a key role, functioning as the sulfur substrate-binding protein that offers its sulfur substrate, which is covalently bound to a conserved C-terminal cysteine, to another oxidizing Sox enzyme. Here, we report the crystal structures of a stand-alone SoxY protein of C. limicola f. thiosulfatophilum, solved at 2.15 A and 2.40 A resolution using X-ray diffraction data collected at 100 K and room temperature, respectively. The structure reveals a monomeric Ig-like protein, with an N-terminal alpha-helix, that oligomerizes into a tetramer via conserved contact regions between the monomers. The tetramer can be described as a dimer of dimers that exhibits one large hydrophobic contact region in each dimer and two small hydrophilic interface patches in the tetramer. At the tetramer interface patch, two conserved redox-active C-terminal cysteines form an intersubunit disulfide bridge. Intriguingly, SoxY exhibits a dimer/tetramer equilibrium that is dependent on the redox state of the cysteines and on the type of sulfur substrate component bound to them. Taken together, the dimer/tetramer equilibrium, the specific interactions between the subunits in the tetramer, and the significant conservation level of the interfaces strongly indicate that these SoxY oligomers are biologically relevant.

Identification of an Intersubunit Cross-Link between Substituted Cysteine Residues Located in the Putative ATP Binding Site of the P2X1Receptor

P2X receptors are ATP-gated nonselective cation channels. Functional receptors are assembled as homotrimers or heterotrimers of seven cloned subunits. Each subunit contains two transmembrane domains linked by a large extracellular loop that is required for agonist binding. So far, there is no direct evidence indicating whether the agonist binding site is formed within one subunit or at the interface of two neighboring subunits. Here we used a disulfide cross-linking approach to identify pairs of residues that are in close proximity within the ATP binding site of the P2X1 homotrimer. Eight amino acid residues that have previously been shown to be essential for high ATP potency (K68, K70, F185, K190, F291, R292, R305, and K309) were substituted by cysteine residues, and the respective mutant subunits were pairwise expressed in Xenopus laevis oocytes. Nonreducing SDS-PAGE analysis of the purified receptors revealed a spontaneous and specific dimer formation between the K68C and F291C mutants. An almost complete cross-link into trimers was achieved with the K68C/F291C double mutant, consistent with the formation of intersubunit disulfide bridges. In support of this interpretation, two-electrode voltage-clamp analysis of the K68C/F291C mutations introduced into a nondesensitizing P2X(2-1) chimera showed only small ATP-activated currents that, however, increased approximately 60-fold after extracellular application of the reducing agent dithiothreitol. In addition, we show that a K68C/K309C double mutant is nonfunctional and can be functionally rescued by coexpression with nonmutated subunits. Our data are consistent with loops from neighboring P2X subunits forming the ATP-binding site in P2X receptors.

Native and subunit molecular mass and quarternary structure of the hemoglobin from the primitive branchiopod crustacean Triops cancriformis

Many branchiopod crustaceans are endowed with extracellular, high-molecular-weight hemoglobins whose exact structural characteristics have remained a matter of conjecture. By using a broad spectrum of techniques, we provide precise and coherent information on the hemoglobin of one of the phylogenetically 'oldest' extant branchiopods, the tadpole shrimp Triops cancriformis. The hemoglobin dissociated under reducing conditions into two subunits, designated TcHbA and TcHbB, with masses of 35,775+/-4 and 36,055+/-4 Da, respectively, determined by ESI-MS. Nonreducing conditions showed only two disulfide-bridged dimers, a homodimer of TcHbA, designated D1 (71,548+/-5 Da), and the heterodimer D2 (71,828+/-5 Da). Carbamidomethylation of free SH groups revealed the presence of three cysteines per subunit and indicated one intrasubunit and one intersubunit disulfide bridge. Ultracentrifugation and light-scattering experiments under nondenaturating conditions yielded mass estimates that suggested an uneven number of 17 subunits forming the native hemoglobin. This unrealistic number resulted from the presence of two size classes (16-mer and 18-mer), which were recognized by native PAGE and Ferguson plot analysis. ESI-MS revealed three hemoglobin isoforms with masses of 588.1 kDa, 662.0 kDa, and 665.0 kDa. The 16-mer and the smaller 18-mer species are supposed to be composed of TcHbA only, given the dominance of this subunit type in SDS/PAGE. Transmission electron microscopy of negatively stained specimens showed a population of compact molecules with geometrical extensions of 14, 16 and 9 nm. The proposed stoichiometric model of quarternary structure provides the missing link to achieve a mechanistic understanding of the structure-function relationships among the multimeric arthropodan hemoglobins.

Structure of rhodocetin reveals noncovalently bound heterodimer interface

Rhodocetin is a unique heterodimer consisting of alpha- and beta-subunits of 133 and 129 residues, respectively. The molecule, purified from the crude venom of the Malayan pit viper, Calloselasma rhodostoma, functions as an inhibitor of collagen-induced aggregation. Rhodocetin has been shown to have activity only when present as a dimer. The dimer is formed without an intersubunit disulfide bridge, unlike all the other Ca(2+)-dependent lectin-like proteins. We report here the 1.9 A resolution structure of rhodocetin, which reveals the compensatory interactions that occur in the absence of the disulfide bridge to preserve activity.

Structure and Stability of the Non-covalent Swapped Dimer of Bovine Seminal Ribonuclease: AN ENZYME TAILORED TO EVADE RIBONUCLEASE PROTEIN INHIBITOR

A growing number of pancreatic-type ribonucleases (RNases) present cytotoxic activity against malignant cells. The cytoxicity of these enzymes is related to their resistance to the ribonuclease protein inhibitor (RI). In particular, bovine seminal ribonuclease (BS-RNase) is toxic to tumor cells both in vitro and in vivo. BS-RNase is a covalent dimer with two intersubunit disulfide bridges between Cys(31) of one chain and Cys(32) of the second and vice versa. The native enzyme is an equilibrium mixture of two isomers, MxM and M=M. In the former the two subunits swap their N-terminal helices. The cytotoxic action is a peculiar property of MxM. In the reducing environment of cytosol, M=M dissociates into monomers, which are strongly inhibited by RI, whereas MxM remains as a non-covalent dimer (NCD), which evades RI. We have solved the crystal structure of NCD, carboxyamidomethylated at residues Cys(31) and Cys(32) (NCD-CAM), in a complex with 2'-deoxycitidylyl(3'-5')-2'-deoxyadenosine. The molecule reveals a quaternary structural organization much closer to MxM than to other N-terminal-swapped non-covalent dimeric forms of RNases. Model building of the complexes between these non-covalent dimers and RI reveals that NCD-CAM is the only dimer equipped with a quaternary organization capable of interfering seriously with the binding of the inhibitor. Moreover, a detailed comparative structural analysis of the dimers has highlighted the residues, which are mostly important in driving the quaternary structure toward that found in NCD-CAM.

Crystal Structure of Caspase-2, Apical Initiator of the Intrinsic Apoptotic Pathway

The cell death protease caspase-2 has recently been recognized as the most apical caspase in the apoptotic cascade ignited during cell stress signaling. Cytotoxic stress, such as that caused by cancer therapies, leads to activation of caspase-2, which acts as a direct effector of the mitochondrion-dependent apoptotic pathway resulting in programmed cell death. Here we report the x-ray structure of caspase-2 in complex with the inhibitor acetyl-Leu-Asp-Glu-Ser-Asp-aldehyde at 1.65-A resolution. Compared with other caspases, significant structural differences prevail in the active site region and the dimer interface. The structure reveals the hydrophobic properties of the S5 specificity pocket, which is unique to caspase-2, and provides the details of the inhibitor-protein interactions in subsites S1-S4. These features form the basis of caspase-2 specificity and allow the design of caspase-2-directed ligands for medical and analytical use. Another unique feature of caspase-2 is a disulfide bridge at the dimer interface, which covalently links the two monomers. Consistent with this finding, caspase-2 exists as a (p19/p12)2 dimer in solution, even in the absence of substrates or inhibitors. The intersubunit disulfide bridge stabilizes the dimeric form of caspase-2, whereas all other long prodomain caspases exist as monomers in solution, and dimer formation is driven by ligand binding. Therefore, the central disulfide bridge appears to represent a novel way of dimer stabilization in caspases.

A role for the intersubunit disulfides of seminal RNase in the mechanism of its antitumor action.

The dimeric structure of seminal ribonuclease (BS-RNase) is maintained by noncovalent interactions and by two intersubunit disulfide bridges. Another unusual feature of this enzyme is its antitumour action, consisting in a cytotoxic activity selective for malignant cells. This cytotoxic action is exerted when the protein reaches the cytosol of the affected cells, where it degrades ribosomal RNA, thus blocking protein synthesis and leading cells to death. The current model proposed for the mechanism of antitumour action of BS-RNase is based on the ability of the protein to resist the neutralizing action of the cytosolic RNase inhibitor, a resistance due to the dimeric structure of the enzyme. Monomeric RNases, and monomeric derivatives of BS-RNase, are strongly bound by the inhibitor and inactive as antitumor agents. Here we report on monomeric derivatives of BS-RNase that, although strongly inhibited by the cytosolic RNase inhibitor, are cytotoxic towards malignant cells. These monomers are produced by reductive cleavage of the intersubunit disulfides of the native, dimeric protein followed by linking the exposed sulfhydryls to small thiols through formation of mixed disulfides. We found that sulfhydryls from cell monolayers and cell membranes can attack these mixed disulfides in the monomeric derivatives, and reconstitute, through sulfhydryl-disulfide interchange reactions, the native dimeric protein, which is internalized as such, and displays its antitumour action.

Intersubunit disulfide bridge is not required for the protective role of SP-B against lung inflammation.

Surfactant protein B (SP-B) is known to promote surfactant phospholipid film formation and reduce surface tension. Native SP-B is a homodimer in which subunit association is stabilized via covalent linkage through cysteine 48. We hypothesized that loss of the intersubunit bridge would alter SP-B function and lead to increased inflammation in response to challenge by hyperoxia or endotoxin. Transgenic mice in which SP-B cysteine 48 was mutated to serine were generated and crossed into the SP-B(-/-) background. Wild-type mice and transgenic mice carrying a single copy (SP-Bmon(+)) or two copies (SP-Bmon(++)) of the transgene were exposed to 95% O2 for 3 days or intratracheally injected with 10 microg of endotoxin. Interleukin-1beta, major intrinsic protein 2, and interleukin-6 in lung homogenates after 3 days of hyperoxia were significantly higher (P < 0.001) in SP-Bmon(+) mice than SP-Bmon(++) or wild-type mice. At 16 h after endotoxin injection, cytokines in lung tissues were higher in SP-Bmon(+) mice compared with wild-type mice (P < 0.05). Consistent with prolonged recovery in SP-Bmon(+) mice, the percentage of apoptotic cells in alveolar lavage was significantly lower in SP-Bmon(+) mice than in SP-Bmon(++) and wild-type mice. Overall, increased inflammation in SP-Bmon(+) mice was corrected to a large extent by increased gene dosage, indicating that formation of the intersubunit disulfide bridge is not critical for SP-B function.

Engineering of an Intersubunit Disulfide Bridge in the Iron-Superoxide Dismutase of Mycobacterium tuberculosis

With the aim of enhancing interactions involved in dimer formation, an intersubunit disulfide bridge was engineered in the superoxide dismutase enzyme of Mycobacterium tuberculosis. Ser-123 was chosen for mutation to cysteine since it resides at the dimer interface where the serine side chain interacts with the same residue in the opposite subunit. Gel electrophoresis and X-ray crystallographic studies of the expressed mutant confirmed formation of the disulfide bond under nonreducing conditions. However, the mutant protein was found to be less stable than the wild type as judged by susceptibility to denaturation in the presence of guanidine hydrochloride. Decreased stability probably results from formation of a disulfide bridge with a suboptimal torsion angle and exclusion of solvent molecules from the dimer interface.

A novel dimer of a C-type lectin-like heterodimer from the venom of Calloselasma rhodostoma (Malayan pit viper)

We have isolated a potent platelet aggregation inducer from the crude venom of Calloselasma rhodostoma (Malayan pit viper), termed rhodoaggretin, with a novel oligomeric structure consisting of a dimer of C-type lectin-like heterodimers. On the basis of its native molecular mass of 66 kDa, and a M r of 30 kDa for its disulfide-linked αβ-heterodimer, we propose that rhodoaggretin exists as a (αβ) 2 complex in the native state. We postulate that the di-dimer is stabilized by non-covalent interactions as well as by an intersubunit disulfide bridge between the two αβ-heterodimers. This conclusion is based on the following observations: (a) sodium dodecylsulfate–polyacrylamide gel electrophoresis (SDS–PAGE) of the non-reduced rhodoaggretin gave a major 28 and a minor 52 kDa band. (b) Prior treatment of rhodoaggretin with a limited amount of 2-mercaptoethanol (2-ME; 0.1%) resulted in the complete abolishment of the 52 kDa band in SDS–PAGE. (c) Two-dimensional SDS–PAGE in the presence of 3% 2-ME showed that both the 28 and 52 kDa bands gave two bands each with M rs of 18 (α-subunit) and 15 (β-subunit) kDa. (d) Mass spectrometric analyses showed that purified rhodoaggretin had a M r of 30 155.39±3.25 Da while its s-pyridylethylated α- and β-subunits had M rs of 16 535.62±2.98 and 15 209.89±1.61 Da respectively. These molecular weight data suggested the presence of 15 cysteinyl residues in rhodoaggretin as compared to the 14 that are reported for the heterodimeric C-type lectin-like proteins. This extra cysteinyl residue is a candidate for the formation of the intersubunit disulfide bond in the (αβ) 2 complex. (e) Homology structural modeling studies showed that the extra cysteinyl residue can indeed form a disulfide bond that covalently links the two αβ-heterodimers as proposed above.

Thermal stability of pyrrolidone carboxyl peptidases from the hyperthermophilic Archaeon, Pyrococcus furiosus

The temperature adaptation of pyrrolidone carboxyl peptidase (PCP) from a hyperthermophile, Pyrococcus furiosus (Pf PCP), was characterized in the context of an assembly form of the protein which is a homotetramer at neutral pH. The Pf PCP exhibited maximal catalytic activity at 90-95 degrees C and its activity was higher in the temperature range 30-100 degrees C than its counterpart from the mesophilic Bacillus amyloliquefaciens (BaPCP). Thermal stability was monitored by differential scanning calorimetry (DSC). Two clearly separated peaks appeared on the DSC curves for Pf PCP at alkaline and acidic pH. Using the oxidized Pf PCP and two mutant proteins (Pf C188S and Pf C142/188S), it was found that the peaks on the high and low temperature sides of the DSC curve of Pf PCP were produced by the forms with an intersubunit disulfide bridge between the two subunits and without the bridge, respectively, indicating the stabilization effect of intersubunit disulfide bridges. The denaturation temperature (Td) of Pf PCP with intersubunit disulfide bridges was higher by 53 degrees C at pH 9.0 than that of BaPCP. An analysis of the equilibrium ultracentrifugation patterns showed that the tetrameric Pf C142/188S dissociated into dimers with decreasing pH in the acidic region and became monomer subunits at pH 2.5. The heat denaturation of Pf PCP and its two Cys mutants was highly reversible in the dimeric forms, but completely irreversible in the tetrameric form. The Td of Pf C142/188S decreased as the enzyme became dissociated, but the monomeric form of the protein was still folded at pH 2.5, although BaPCP was completely denatured at acidic pH. These results indicate that subunit interaction plays an important role in stabilizing PCP from P. furiosus in addition to the intrinsic enhanced stability of its monomer.

Activation of active-site cysteine residues in the peroxiredoxin-type tryparedoxin peroxidase of Crithidia fasciculata.

Tryparedoxin peroxidase (TXNPx), recently identified as the hydroperoxide-detoxifying enzyme of trypanosomatidae [Nogoceke, E., Gommel, D. U., Kiess, M., Kalisz, H. M. & Flohé, L. (1997) Biol. Chem. 378, 827-836], is a member of the peroxiredoxin family and is characterized by two VCP motifs. Based on a consensus sequence of TXNPx and peroxiredoxin-type peroxidases, eight TXNPx variants were designed, heterologously expressed in Escherichia coli, checked for alpha-helix content by CD and kinetically analysed. The variant Q164E was fully active, C52S, W87D and R128E were inactive and C173S, W87H, W177E and W177H showed reduced activity. Wild-type TXNPx and Q164E exhibit ping-pong kinetics with infinite maximum velocities, whereas saturation kinetics were observed with C173S and W177E. The data comply with a mechanism in which C52, primarily activated by R128 and possibly by W87, is first oxidized by hydroperoxide to a sulfenic acid derivative. C173, supported by W177, then forms an intersubunit disulfide bridge with C52. If C173 is exchanged with a redox-inactive residue (Ser) or is insufficiently activated, the redox shuttle remains restricted to C52. The shift in the kinetic pattern and decrease in specific activity of C173S and W177E may result from a limited accessibility of the oxidized C52 to tryparedoxin, which in the oxidized wild-type TXNPx presumably attacks the C173 sulfur of the disulfide bridge. The proposed mechanism of action of TXNPx is consistent with that deduced for the homologous thioredoxin peroxidase of yeast [Chae, H. Z., Uhm, T. B. & Rhee, S. G. (1994) Proc. Natl Acad. Sci. USA 91, 7022-7026] and is supported by molecular modelling based on the structure of the human peroxiredoxin 'hORF6' [Choi, H.-J., Kang, S. W. Yang, C.-H., Rhee, S. G. & Ryu, S.-E. (1998) Nat. Struct. Biol. 5, 400-406].

Rhodocetin, a novel platelet aggregation inhibitor from the venom of Calloselasma rhodostoma (Malayan pit viper): synergistic and noncovalent interaction between its subunits.

A novel platelet aggregation inhibitor, rhodocetin, was purified from the crude venom of Calloselasma rhodostoma. It inhibited collagen-induced platelet aggregation in a dose-dependent manner, with an IC50 of 41 nM. Rhodocetin has a heterodimeric structure with alpha and beta subunits, which could be separated on a nonreducing denaturing gel or reverse-phase HPLC column. Individually neither subunit inhibited platelet aggregation even at 2.0 microM concentration. Titration and reconstitution experiments showed that, when these subunits are mixed to give a 1:1 complex, most of its biological activity was recovered. The reconstituted complex inhibited platelet aggregation with an IC50 of 112 nM, about 3-fold less effective than the native molecule. Circular dichroism analysis revealed that the reconstituted complex had a spectrum similar to that of the native protein. By using surface plasmon resonance studies, we established that the stoichiometry of binding between the two subunits is 1:1 and the subunits interact with a Kd of 0.14 +/- 0.04 microM. The complete amino acid sequences of the alpha (15956.16 Da, 133 residues) and beta (15185.10 Da, 129 residues) subunits show a high degree of homology with each other (49%) and with the Ca2+-dependent lectin-related proteins (CLPs) (typically 29-48%) isolated from other snake venoms. Unlike the other members of the family in which the subunits are held together by an interchain disulfide bond, rhodocetin subunits are held together only through noncovalent interactions. The cysteinyl residues forming the intersubunit disulfide bridge in all other known CLPs are replaced by Ser-79 and Arg-75 in the alpha and beta subunits of rhodocetin, respectively. These studies support the noncovalent and synergistic interactions between the two subunits of rhodocetin. This is the first reported CLP dimer with such a novel heterodimeric structure.

Seminal-type ribonuclease genes in ruminants, sequence conservation without protein expression?

Bovine seminal ribonuclease (BS-RNase) is an interesting enzyme both for functional and structural reasons. The enzyme is the product of a gene duplication that occurred in an ancestral ruminant. It is possible to demonstrate the presence of seminal-type genes in all other investigated ruminant species, but they are not expressed and show features of pseudogenes. In this paper we report the determination of two pancreatic and one seminal-type ribonuclease gene sequences of swamp-type water buffalo (Bubalus bubalis). The two pancreatic sequences encode proteins with identical amino acid sequences as previously determined for the enzymes isolated from swamp-type and river-type water buffalo, respectively. The seminal-type sequence has no pseudogene features and codes for an enzyme with no unusual features compared with the active bovine enzyme, except for the replacement of one of the cysteines which takes part in the two intersubunit disulfide bridges. However, Western blotting demonstrates the presence of only small amounts of the pancreatic enzymes in water buffalo semen, suggesting that also in this species the seminal-type sequence is not expressed. But it is still possible that the gene is expressed somewhere else in the body or during development. Reconstruction of seminal-type ribonuclease sequences in ancestors of Bovinae and Bovidae indicates no serious abnormalities in the encoded proteins and leads us to the hypothesis that the ruminant seminal-type ribonuclease gene has not come to expression during most of its evolutionary history, but did not exhibit a high evolutionary rate that is generally observed in pseudogenes.

Cavity-creating mutation at the dimer interface of Plasmodium falciparum triosephosphate isomerase: restoration of stability by disulfide cross-linking of subunits.

Disulfide engineering across subunit interfaces provides a means of inhibiting dissociation during unfolding of multimeric enzymes. Two symmetry-related intersubunit disulfide bridges were introduced across the interface of the dimeric enzyme triosephosphate isomerase from Plasmodium falciparum. This was achieved by mutating a tyrosine residue at position 74 at the subunit interface to a cysteine, thereby enabling it to form a covalent cross-link with a pre-existing cysteine at position 13 of the other subunit. The wild-type enzyme (TIMWT) and the oxidized (Y74Cox) and reduced (Y74Cred) forms of the mutant have similar enzymatic activity, absorption, and fluorescence spectra. All three proteins have similar far-UV CD spectra. The Y74Cred shows a distinct loss of near-UV CD. Thermal precipitation studies demonstrate that TIMWT and Y74Cox have very similar Tm values (Tm approximately 60 degreesC) whereas Y74Cred is surprisingly labile (Tm approximately 38 degreesC). The Y74C mutant results in the creation of a large cavity (approximately 100 A3) at the dimer interface. The crystal structure for the oxidized form of Y74C mutant, crystallized in the presence of low concentrations of dithiothreitol, reveals an asymmetric dimer containing a disulfide bridge at one site and a reduced dithiol cysteine at the other. The crystal structure of the mutant offers insights into the destabilization effects of the interfacial cavities and the role of disulfide tethering in restoring protein stability.

Thiol ester role in correct folding and conformation of human α 2-macroglobulin : Properties of recombinant C949S variant

To determine the role of the thiol ester in the folding of human α 2-macroglobulin (α 2M) in the active conformation, we have characterized a recombinant variant of α 2M, C949S, expressed in baby hamster kidney cells, that lacks the thiol ester-forming cysteine. C949S α 2M behaves like methylamine-treated plasma α 2M, with correctly formed inter-subunit disulfide bridges, non-covalent association of covalent dimers to form tetramers, and exposure of the receptor binding domain, but an inability to inhibit proteinases, and inaccessibility of the bait regions to proteolysis. We concluded that correct folding of monomers or their association to give tetrameric α 2M does not require a pre-formed thiol ester. Active α 2M may form in vivo by a two-step process involving initial folding to give a structure resembling that of C949S α 2M followed by thiol ester formation and a conformational change that gives the native active state.

Refined Crystal Structure of Human Transforming Growth Factor β2 at 1·5 Å Resolution

Transforming growth factor β2, (TGF-β2), a homodimeric protein, is a member of a family of structurally related polypeptides that regulate various growth and differentiation processes in many cell types. The crystal structure of recombinant human TGF-β2 has been determined using a single heavy-atom derivative, anomalous scattering and by applying solvent flattening. The molecular model has been refined by a combination of simulated annealing and restrained least-squares refinement to a crystallographic R-factor of 0·194 including all data from 1·95 Å to 8·0 Å resolution. In the final structure, the root-mean-square deviation for bond lengths is 0·007 Å and for bond angles 1·97°. The final model includes 890 protein atoms (all 112 amino acid residues) as well as 84 water molecules. The new monomer fold consists of a separate α-helix and two pairs of antiparallel β-sheet segments, which can be subdivided into nine individual β-strands. The extended monomer lacks the typical hydrophobic core. A cluster of disulfide bridges, including the TGF-β knot, connects the β-strands with each other as well as the α-helix. Two monomers are covalently linked by a single disulfide bridge. In the dimer the α-helix of one subunit interacts with the β-sheet of the other subunit forming two symmetrically related hydrophobic cores. The center of the dimer interaction is stabilized by a network of hydrogen bonds including several well-defined water molecules, which surround the central intersubunit disulfide bridge. The refined structure reveals the details of hydrogen bonding, electrostatic and hydropholic interactions between intra- and intersubunit residues and allows the identification of possible receptor binding segments.