Internet Of Things Tasks Research Articles

Analysis of Energy Consumption and Topology of Routing Protocol for Low-Power and Lossy Networks

Internet of things (IoT) are getting more deployed in different environment where they provide many benefits for industrial and home automation, smart buildings, medical and environmental monitoring. Sensors are low cost devices with limited storage, computation, and power. Finding optimal based routing solutions is a challenging task in IoT because of constraint over nodes and lossy links. IETF standardized the IPv6 based RPL routing protocol for Low power and Lossy Networks (LLNs) in 2012. It selects the ideal routes from a source to a destination node based on certain metrics injected into the Objective Function (OF). Because RPL uses the DODAG topology, it is easy to lead to the rapid depletion of node power at the upper level of the routing topology. Reducing the network energy consumption to prolong the life cycle of network is very important for IoT. In this paper, we investigate the energy consumption and topology of RPL routing protocol and put up some proposals for a plethora of IoT applications.

A Dynamic Programming Algorithm for High-Level Task Scheduling in Energy Harvesting IoT

Outdoor Internet of Things (IoT) applications usually exploit energy harvesting systems to guarantee virtually uninterrupted operations. However, the use of energy harvesting poses issues concerning the optimization of the utility of the application while guaranteeing energy neutrality of the devices. In this context, we propose a new dynamic programming algorithm for the optimization of the scheduling of the tasks in IoT devices that harvest energy by means of a solar panel. We show that the problem is NP-hard and that the algorithm finds the optimum solution in a pseudo-polynomial time. Furthermore, we show that the algorithm can be executed with a small overhead on three popular IoT platforms (namely TMote, Raspberry PI, and Arduino) and, by simulation, we show the behavior of the algorithm with different settings and at different conditions of energy production.

Edge Computing Framework for Cooperative Video Processing in Multimedia IoT Systems

Multimedia Internet-of-Things (IoT) systems have been widely used in surveillance, automatic behavior analysis and event recognition, which integrate image processing, computer vision, and networking capabilities. In conventional multimedia IoT systems, videos captured by surveillance cameras are required to be delivered to remote IoT servers for video analysis. However, the long-distance transmission of a large volume of video chunks may cause congestions and delays due to limited network bandwidth. Nowadays, mobile devices, e.g., smart phones and tablets, are resource-abundant in computation and communication capabilities. Thus, these devices have the potential to extract features from videos for the remote IoT servers. By sending back only a few video features to the remote servers, the bandwidth starvation of delivering original video chunks can be avoided. In this paper, we propose an edge computing framework to enable cooperative processing on resource-abundant mobile devices for delay-sensitive multimedia IoT tasks. We identify that the key challenges in the proposed edge computing framework are to optimally form mobile devices into video processing groups and to dispatch video chunks to proper video processing groups. Based on the derived optimal matching theorem, we put forward a cooperative video processing scheme formed by two efficient algorithms to tackle above challenges, which achieves suboptimal performance on the human detection accuracy. The proposed scheme has been evaluated under diverse parameter settings. Extensive simulation confirms the superiority of the proposed scheme over other two baseline schemes.

SDN-Based Data Transfer Security for Internet of Things

The exponential growth of devices connected to the network has resulted in the development of new Internet of Things (IoT) applications and online services, which may have diverse and dynamic requirements on received quality. Although, the emerging software-defined networking (SDN) approach can be leveraged for the IoT environment, to dynamically achieve differentiated quality levels for different IoT tasks in very heterogeneous wireless networking scenarios, the open interfaces in SDN introduces new network attacks, which may make SDN-based IoT malfunctioned. The challenges lies in securely using SDN for IoT systems. To address this challenge, we design a SDN-based data transfer security model middlebox-guard (M-G). M-G aims at reducing network latency, and properly manage dataflow to ensure the network run safely. First, according to different security policies, middleboxes related to the defined secure policies, are placed at the most appropriate locations, using dataflow abstraction and a heuristic algorithm. Next, to avoid any middlebox becoming a hotspot, an offline integer linear program (ILP) pruning algorithm is proposed in M-G, to tackle switch volume constraints. In addition, an online linear program (LP) formulation is come up to handle load balance. Finally, secure mechanisms are proposed to handle different attacks. And network routing is solved flexibly, through dataflow management protocol, which are formulated via combining tunnels and tags. Experimental results demonstrate that this model can improve security performance and manage dataflow effectively in SDN-based IoT system.

RIoTBench: An IoT benchmark for distributed stream processing systems

SummaryThe Internet of Things (IoT) is an emerging technology paradigm where millions of sensors and actuators help monitor and manage physical, environmental, and human systems in real time. The inherent closed‐loop responsiveness and decision making of IoT applications make them ideal candidates for using low latency and scalable stream processing platforms. Distributed stream processing systems (DSPS) hosted in cloud data centers are becoming the vital engine for real‐time data processing and analytics in any IoT software architecture. But the efficacy and performance of contemporary DSPS have not been rigorously studied for IoT applications and data streams. Here, we propose RIoTBench, a real‐time IoT benchmark suite, along with performance metrics, to evaluate DSPS for streaming IoT applications. The benchmark includes 27 common IoT tasks classified across various functional categories and implemented as modular microbenchmarks. Further, we define four IoT application benchmarks composed from these tasks based on common patterns of data preprocessing, statistical summarization, and predictive analytics that are intrinsic to the closed‐loop IoT decision‐making life cycle. These are coupled with four stream workloads sourced from real IoT observations on smart cities and smart health, with peak streams rates that range from 500 to 10 000 messages/second from up to 3 million sensors. We validate the RIoTBench suite for the popular Apache Storm DSPS on the Microsoft Azure public cloud and present empirical observations. This suite can be used by DSPS researchers for performance analysis and resource scheduling, by IoT practitioners to evaluate DSPS platforms, and even reused within IoT solutions.

사물 인터넷 환경에서의 그룹 사용자를 위한 그룹 구성 정보 기반 서비스 추천 방법

Recommender systems can be used to assist users in selecting required services for their tasks in Internet of Things (IoT) environments in which diverse services can be provided by utilizing IoT devices. Traditional research on recommendation mainly focuses on predicting preferences of individual users. However, in IoT environments, not only individual users but also groups of users can access services in the environments. In this study, we analyzed user groups' preferences on services and developed service recommendation approach for new groups that do not have a history of accessing IoT-services in a certain place. Our approach extends the traditional user-based collaborative filtering by considering the similarity between user groups based on their member organization. We conducted experiments with a real-world dataset collected from IoT testbed environments. The results demonstrate that the proposed approach is effective to recommend services to new user groups in IoT environments.