Total Reflection Research Articles

Acai Oil-Based Organogel Containing Hyaluronic Acid for Topical Cosmetic: In Vitro and Ex Vivo Assessment.

Organogels are semi-solid pharmaceutical forms whose dispersing phase is an organic liquid, for example, an oil, such as acai oil, immobilized by a three-dimensional network formed by the gelling agent. Organogels are being highlighted as innovative release systems for cosmetic active ingredients such as hyaluronic acid for topical applications. Acai oil was evaluated for its physicochemical parameters, fatty acid composition, lipid quality index, spectroscopic pattern (Attenuated total reflectance Fourier Transform Infrared Spectroscopy), thermal behavior, total phenolic, total flavonoids, and total carotenoids and β-carotene content. The effectiveness of the organogel incorporated with hyaluronic acid (OG + HA) was evaluated through ex vivo permeation and skin retention tests, in vitro tests by Attenuated total reflectance Fourier Transform Infrared Spectroscopy and Differential Scanning Calorimetry. The physicochemical analyses highlighted that the acai oil exhibited quality standards in agreement with the regulatory bodies. Acai oil also showed high antioxidant capacity, which was correlated with the identified bioactive compounds. The cytotoxicity tests demonstrated that the formulation OG + HA does not release toxic substances into the biological environment that could impede cell growth, adhesion, and efficacy. In vitro and ex vivo analyses demonstrated that after 6 h of application, OG + HA presented a high level of hydration, thermal protection and release of HA. Thus, it can be concluded that the OG + HA formulation has the potential for physical-chemical applications, antioxidant quality, and potentially promising efficacy for application in the cosmetic areas.

Optical Based Surface Plasmon Resonance Sensor for the Detection of the Various Kind of Cancerous Cell.

This research explores a novel biosensor design that exhibits much higher sensitivity compared to conventional biosensors. The biosensor's uniqueness originated from its innovative structure, which incorporates N-FK51A/Ag/AlON/BlueP materials, as well as its cutting-edge fabrication method. The refractive index component was considered when designing the SPR biosensor, which was developed from the angular analysis of the attenuated total reflection (ATR) approach for cancer detection. For instance, the resonance angle shifts by 15.57 deg when the refractive index changes from 1.360 to 1.401, demonstrating the sensor's responsiveness to variation in the refractive index. The sensitivities for skin (basal), cervical (HeLa), blood (Jurkat), adrenal gland (PC12), and breast (MDA-MB-231 and MCF-7) cancer cells were 197.65, 243.66, 255.36, 302.71, 372.57, and 416.85 deg/RIU, respectively. Also, the detection accuracy (DA), the figure of merit (FoM), and the quality factor were 0.37/deg, 155.94 (deg/RIU), and 26.71 RIU-1. We also examine the effects of substituting the noble, dielectric, 2D material layer with conventional biosensor materials for six cancers. Each time, the Ag/AION/BlueP layered structure performed best in distinguishing cancer cells from healthy cells. We also study the prism effects. The proposed biosensor, with a RI of 1.29-1.40, has a linear regression coefficient of R2 of 0.96094.

Electrochemical CO2 Reduction in Acidic Electrolytes: Spectroscopic Evidence for Local pH Gradients.

Inspired by recent advances in electrochemical CO2 reduction (CO2R) under acidic conditions, herein we leverage in situ spectroscopy to inform the optimization of CO2R at low pH. Using attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) and fluorescent confocal laser scanning microscopy, we investigate the role that alkali cations (M+) play on electrochemical CO2R. This study hence provides important information related to the local electrode surface pH under bulk acidic conditions for CO2R, both in the presence and absence of an organic film layer, at variable [M+]. We show that in an acidic electrolyte, an appropriate current density can enable CO2R in the absence of metal cations. In situ local pH measurements suggest the local [H+] must be sufficiently depleted to promote H2O reduction as the competing reaction with CO2R. Incrementally incorporating [K+] leads to increases in the local pH that promotes CO2R but only at proton consumption rates sufficient to drive the pH up dramatically. Stark tuning measurements and analysis of surface water structure reveal no change in the electric field with [M+] and a desorption of interfacial water, indicating that improved CO2R performance is driven by suppression of H+ mass transport and modification of the interfacial solvation structure. In situ pH measurements confirm increasing local pH, and therefore decreased local [CO2], with [M+], motivating alternate means of modulating proton transport. We show that an organic film formed via in situ electrodeposition of an organic additive provides a means to achieve selective CO2R (FECO2R ∼ 65%) over hydrogen evolution reaction in the presence of strong acid (pH 1) and low cation concentrations (≤0.1 M) at both low and high current densities.

Degradation of Amyloid-β Species by Multi-Copper Oxidases.

Reduction of the production of amyloid-β (Aβ) species has been intensively investigated as potential therapeutic approaches for Alzheimer's disease (AD). However, the degradation of Aβ species, another potential beneficial approach, has been far less explored. To investigate the potential of multi-copper oxidases (MCOs) in degrading Aβ peptides and their potential benefits for AD treatment. We investigated the degradation efficiency of MCOs by using electrophoresis and validated the ceruloplasmin (CP)-Aβ interaction using total internal reflection fluorescence microscopy, fluorescence photometer, and fluorescence polarization measurement. We also investigated the therapeutic effect of ascorbate oxidase (AO) by using induced pluripotent stem (iPS) neuron cells and electrophysiological analysis with brain slices. We discovered that CP, an important MCO in human blood, could degrade Aβ peptides. We also found that other MCOs could induce Aβ degradation as well. Remarkably, we revealed that AO had the strongest degrading effect among the tested MCOs. Using iPS neuron cells, we observed that AO could rescue neuron toxicity which induced by Aβ oligomers. In addition, our electrophysiological analysis with brain slices suggested that AO could prevent an Aβ-induced deficit in synaptic transmission in the hippocampus. To the best of our knowledge, our report is the first to demonstrate that MCOs have a degrading function for peptides/proteins. Further investigations are warranted to explore the possible benefits of MCOs for future AD treatment.

X-ray Induced Cycling of Rare-Earth Elements between Bulk and Interfacial Liquid.

Reversible cycling of rare-earth elements between an aqueous electrolyte solution and its free surface is achieved by X-ray exposure. This exposure alters the competitive equilibrium between lanthanide ions bound to a chelating ligand, diethylenetriamine pentaacetic acid (DTPA), in the bulk solution and to insoluble monolayers of extractant di-hexadecyl phosphoric acid (DHDP) at its surface. Evidence for the exposure-induced temporal variations in the lanthanide surface density is provided by X-ray fluorescence near total reflection measurements. Comparison of results when X-rays are confined to the aqueous surface region to results when X-rays transmit into the bulk solution suggests the importance of aqueous radiolysis in the adsorption cycle. Amine binding sites in DTPA are identified as a likely target of radiolysis products. The molecules DTPA and DHDP are like those used in the separation of lanthanides from ores and in the reprocessing of nuclear fuel. These results suggest that an external source of X-rays can be used to drive rare-earth element separations. More generally, use of X-rays to controllably dose a liquid interface with lanthanides could trigger a range of interfacial processes, including enhanced metal ion extraction, catalysis, and materials synthesis.

The Positional Effect of an Immobilized Re Tricarbonyl Catalyst for CO2 Reduction.

The storage of renewable energy through the conversion of CO2 to CO provides a viable solution for the intermittent nature of these energy sources. The immobilization of rhenium(I) tricarbonyl molecular complexes is presented through the reductive coupling of bis(diazonium) aryl substituents. The heterogenized complex was characterized through ultra-visible, attenuated total reflectance, infrared reflection absorption spectroscopy, and X-ray photoelectron spectroscopy to probe the electronic structure of the immobilized complex. In addition, studies of cyclic voltammetry, controlled potential electrolysis, and electrochemical impedance spectroscopy were conducted to examine the CO2 reduction activity. The structure and CO2 reduction performance were compared with a previously reported immobilized rhenium(I) tricarbonyl molecular complex to probe the effect of varying the tethering of the aryl substituent from the 5,5'-position to the 4,4'-position of the 2,2'-bipyridine backbone. The immobilized complex on carbon cloth at the 4,4'-position provided excellent selectivity (FECO > 99%) and maximum TONCO and TOFCO values of 3359 and 0.9 s-1, respectively, without the addition of a Bro̷nsted acid source. A nonaqueous flow cell demonstrated the stability of this complex during a 5 h electrolysis. Tethering at the 4,4'-position, compared to the 5,5'-position, yielded lower overall activity for CO2 reduction and was attributed to the difference in growth morphology and formation of aggregations, due to Re-Re dimer formation and π-π stacking interactions within the metallopolymer matrix. For carbon cloth substrates, an optimized catalyst loading was determined to be 44.6 ± 11 nmol/cm2.

Characterization of fluoroelastomers compounds by ATR-FTIR

Fluoroelastomers (FKM) are used to manufacture seals and other rubber devices that can withstand harsh operating conditions, including aggressive media and extreme low and high temperatures. Even though nuclear magnetic resonance, Fourier-transform infrared spectroscopy (FTIR), and chromatographic techniques have been extensively used in the characterization of raw FKM molecules, the identification of cured compounds entails a characterization method that is able to overcome the complexity related to this kind of structure. In this sense, attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy can outperform other characterization techniques because it does not require solubilization or any special preparation of the sample. In this study, 10 FKM compounds were produced in this study utilizing four commercial types of FKM and the fillers carbon black, barium sulfate, and iron oxide. All unfilled-FKM (as received) and their compounds were analyzed by ATR-FTIR with germanium crystal. Between 15 and 25 analyses were performed for all each FKM type sample and their respective compounds. All spectra were analyzed, and the bands were assigned. Findings regarding the interference of the fillers in the spectra were also reported. From relationships between the height of the spectral zones and the bands at 1397 and 1428 cm−1, it was possible to distinguish all sample compositions of FKM types 1, 2, 3, and 5. This study demonstrates that ATR-FTIR has the potential to be utilized as a technique to detect the type of FKM compounds, an important rubber used in harsh industrial applications. Replacing carbon with BaSO4 reduces the tensile at 50% strain of FKM types 1 and 2 composites. FKM types 3 and 5 composites filled with 30 phr of carbon black have a higher tensile at 50% strain than those of FKM type 1.

Two-dimensional refractive index distribution using polarization phase shifting interferometry and total internal reflection

An effective method to measure the 2-D refractive index distribution of homogeneous liquids: acetic acid and glycerol- water mixture at different concentration and a non- homogeneous mixture of liquids: water, acetic acid, acetone and glycerin but not limited to these liquids is presented. In the present setup a combination of polarization phase shifting interferometry (PPSI) and total internal reflection (TIR) is used. The s-polarized light strikes the boundary of a right angle prism and a tested liquid droplet. When TIR occurs on the interface, the incident light has a phase variation which depends on the refractive index of adhered liquid on prism surface. Two-dimensional index distributions can be easily calculated using the relation among reflection phase shift difference and the liquid index. The results of the tested mixed liquid by proposed technique show the refractive index and its distribution in range 1.433 ± 0.031 to 1.433 ± 0.124.

Strong and Tough Multilayer Heterogeneous Pyrocarbon Based Composites

AbstractThe integration of bio‐inspired hierarchical design into synthetic carbon materials holds promise for developing lightweight, high‐performance structural materials. Hierarchical and heterogeneous nanoscale units are crucial to load bearing and mechanical functionality yet receives limited attention for difficulties in accurate regulation. Herein, one kind of multilayered heterogeneous have proposed pyrocarbon based composite constructed through chemical vapor deposition method with nanoscale graphene orderliness regulation. Sequential construction from orientational graphene sheets to nondirective isotropic networks is achieved through controlling the size and morphology of pyrolysis intermediates with moderate oxidation, being expected to facilitate load transfer and structural stability through dynamically adjustment in heterogeneous interfacial sliding. The resulting multilayer heterogeneous phases exhibit impressive strengthening and toughening mechanisms dominated by microstructural multiscale coupling, which provides new solutions for developing structural composites for high‐temperature aerospace applications. Additionally, the multiple internal reflections arising from the abundant heterogeneous interfaces significantly improve the efficiency of electromagnetic microwave absorption. The multilayered heterogeneous interfaces achieved through orderliness manipulation offer novel insights into the assembly of mechanical functionality integration for wide‐temperature applications and high‐performance macroscopic carbon‐based composites.

Infrared Spectroscopy of Live Cells Using High-Aspect-Ratio Metal-on-Dielectric Metasurfaces.

Fourier transform infrared (FTIR) spectroscopy is widely used for molecular analysis. However, for the materials situated in an aqueous environment, a precondition for live biological objects such as cells, transmission-based FTIR is prevented by strong water absorption of mid-infrared (MIR) light. Reflection-based cellular assays using internal reflection elements (IREs) such as high-index prisms or flat plasmonic metasurfaces mitigate these issues but suffer from a shallow probing volume localized near the plasma membrane. Inspired by the recent introduction of high-aspect-ratio nanostructures as a novel platform for manipulating cellular behavior, we demonstrate that the integration of plasmonic metasurfaces with tall dielectric nanostructures dramatically enhances the sensing capabilities of FTIR spectroscopy. We also demonstrate the ability of a metal-on-dielectric metasurface to transduce intracellular processes, such as protein translocation to high-curvature membrane regions during cell adhesion, into interpretable spectral signatures of the reflected light.

Novel biophysical skin biomarkers discriminate topical anti‐inflammatory treatments based on their potential for local adverse effects

AbstractBackgroundTopical corticosteroids (TCS) are efficacious treatments for inflammatory skin conditions, however, there is a risk of adverse effects; understanding how best to use these treatments is an unmet research priority shared by patients and healthcare professionals.ObjectivesTo develop non‐invasive biomarkers of local adverse effects to facilitate the optimisation of topical therapy.MethodsAn observer‐blind randomised within‐subject controlled trial in atopic dermatitis patients was undertaken (NCT04194814) comparing betamethasone valerate 0.1% cream (BMV) to a non‐steroidal anti‐inflammatory treatment, crisaborole 2% ointment (CRB). Participants underwent 4 weeks twice‐daily treatment with CRB on one forearm and BMV on the other (left/right randomised). Skin properties were assessed on days 1, 15, 29 of treatment and again on day 57, including imaging of skin microstructure using Optical Coherence Tomography (OCT) and Attenuated Total Reflectance (ATR)‐Fourier Transform Infrared (FTIR) spectroscopic assessment of stratum corneum molecular structure. The primary outcome was the difference in the change in epidermal thickness from days 1 to 29.ResultsThirty‐seven participants received the first dose, of which 32 completed the study (all 37 were included in the analysis). Pathologic epidermal thinning at day 29 was significantly greater (p < 0.0001) at sites treated with BMV (−31.66; 95% confidence interval: −35.31, −28.01 µm) compared to CRB (−13.76; −17.42, −10.10 µm). From a panel of exploratory biomarkers, superficial plexus depth and stratum corneum carboxyl group levels had the greatest ability to discriminate the effects of the TCS treatment (p < 0.0001).ConclusionsBMV induced 2.3x more pathologic epidermal thinning than CRB after 4 weeks of treatment, suggesting that CRB may be more appropriate for longer‐term, proactive‐based, treatment strategies where the risks of adverse effects are greatest. By monitoring treatment effects using OCT and ATR‐FTIR spectroscopy, two new non‐invasive biomarkers of skin health have been identified with the potential to help optimise future safe treatment strategies.

Optimization of Bacterial Cellulose Production from Waste Figs by Komagataeibacter xylinus

This study aimed to use waste figs as an alternative substrate for bacterial cellulose (BC) production by Komagataeibacter xylinus and optimize the identified process parameters to maximize the concentration of BC. Among the nutrients screened by Plackett–Burman (PB) design, yeast extract was found to be significant in BC production. Response surface methodology was used to investigate the effect of fermentation parameters on BC production. A maximum BC concentration of (8.45 g/L), which is among the highest BC concentrations reported so far, was achieved at the optimum levels of fermentation variables (initial pH 6.05, initial sugar concentration 62.75 g/L, temperature 30 °C). The utilization of response surface methodology (RSM) proved valuable in both optimizing and finding the interactions between process variables during BC production. Scanning electron microscope (SEM) analysis showed a dense structure of BC, characterized by ribbon-like nanofibrils with diameters ranging from 23 to 90 nm while the attenuated total reflection–Fourier transform infrared (ATR-FTIR) spectrum of BC confirmed that the material obtained was cellulose. The X-ray diffraction (XRD) analysis showed that the crystallinity of the BC samples was 70% for BC produced on waste fig medium and 61% for BC produced on Hestrin–Schramm (HS) medium. This is the first detailed study on the production of BC from waste figs, and the findings of this study demonstrated that waste figs can be used as an effective substrate for the production of BC.

Computationally optimized multi‐port antenna systems for WLAN/Wi‐Fi (IEEE 802.11a/h/j/n/ac/ax), 5G (mid‐band), and UWB applications

SummaryThis paper presents computationally optimized 2‐element and 4‐element Multiple‐Input, Multiple‐Output (MIMO) antennas for WLAN/Wi‐Fi, 5G, and UWB applications. The antenna configuration is constructed with the orthogonal placement of sawtooth‐shaped circular monopole radiating elements. The Particle Swarm Optimization (PSO) and Covariance Matrix Adaptation Evolution Strategy (CMA‐ES) optimization techniques are employed to achieve the best performance and size of the proposed antenna. Among these optimization techniques, CMA‐ES is identified as the better approach. The final optimized geometry of the 2‐element and 4‐element MIMO antennas is 49.40 mm × 24.22 mm and 49.44 mm × 45 mm, respectively. Both optimized antennas are fabricated and experimentally verified. The fractional bandwidth of the antenna is more than 110.3%, and more than −20 dB isolation is attained without employing any decoupling method. The Envelop Correlation Coefficient (ECC), Directivity Gain (DG), Total Active Reflection Coefficient (TARC), and Channel Capacity Limit (CCL) are 0.0001, 9.99, < −15 dB, and 0.1 bits/s/Hz, respectively. The proposed antenna is a good candidate for numerous current wireless applications due to its size and performance.

Early and swift identification of fungal-infection using infrared spectroscopy

Fungal pathogens pose significant threats to agricultural crops and food products, leading to economic losses, compromised food quality, and health hazards. Early detection is crucial for effective control and treatment. This study explores Fourier transform infrared-attenuated total reflectance (FTIR-ATR) spectroscopy for rapid fungal detection in bread. Using a machine learning algorithm (Random Forest), FTIR-ATR accurately distinguished between pure and infected bread samples, achieving 86% overall accuracy and 84% accuracy in identifying specific fungi like Rhizopus and Aspergillus on the first day of infection. These findings highlight FTIR-ATR’s potential for early fungal infection detection, promising improved food quality and reduced economic losses through timely intervention.

Enhanced rare earth element recovery with cross-linked glutaraldehyde-lanthanide binding peptides in foam-based separations

HypothesisLanthanide Binding Tag (LBT) peptides that coordinate selectively with lanthanide ions can be used to replace the energy intensive processes used for the separation of rare earth elements (REEs). These surface-active biomolecules, once selectively complexed with the trivalent REE cations, can adsorb to air/aqueous interfaces of bubbles for foam-based REEs recovery. Glutaraldehyde, an organic compound that is a homobifunctional crosslinker for proteins and peptides, can be used to enhance the adsorption and interfacial stabilization of lanthanide-bound peptides films. ExperimentsThe stability of the interfacial cross-linked films was tested by measuring their dilational and shear surface rheological properties. Surface activity of the adsorbed species was analyzed using pendant drop tensiometry, while surface density and molecular arrangement were determined using x-ray reflectivity and x-ray fluorescence near total reflection. FindingsGlutaraldehyde cross-linked REE-peptide complexes enhance the adsorption of lanthanides to air-water interfaces, resulting in thicker interfacial structures. Subsequently, these thicker layers enhance the dilational and shear interfacial rheological properties. The interfacial film stabilization and REEs extraction promoted by the cross-linker presented in this work provides an approach to integrate glutaraldehyde as a substitute of common foam stabilizers such as polymers, surfactants, and particles to optimize the recovery of REEs when using biomolecules as extractants.

The effect of adding ZrO2 nanoparticles on the transverse strength and hardness of microwave-cured acrylic and heat-cured acrylic denture base materials

Background: One drawback of acrylic denture base materials is their liability to fracture, requiring methods to increase fracture resistance. Adding nanoparticles (NPs) represented one of these methods. Purpose: The objectives of this study are to evaluate and compare transverse strength and hardness when adding zirconium oxide nanoparticles (ZrO2 NPs) at concentrations of 0%, 3%, and 5% to heat-cured acrylic denture base materials (Ivoclare, Major) and to microwave-cured acrylic (Acron MC). Methods: Transverse strength was tested with a Universal Testing Machine (GESTER, Fujian, China), while hardness tests were conducted by using a Shore-D hardness durometer (Show, China). The 90 samples were prepared and then divided into three groups for each material. Attenuated total reflectance–Fourier transform infrared (ATR-FTIR) spectroscopy was used to analyze the microstructure. The samples were prepared following the manufacturer’s instructions for each material. Results: The results revealed that the addition of ZrO2 NPs (3%, 5%) improves the transverse strength and hardness of polymethyl methacrylate acrylic resin for both types (microwave-cured and heat-cured acrylic resins). The addition of ZrO2 NPs at 3% concentration shows the highest values for both transverse strength and hardness. The ATR-FTIR confirms no structural chemical changes with the addition of ZrO2 NPs. Conclusion: The study concludes that the incorporation of ZrO2 NPs (3%, 5%) into microwave-cured and heat-cured acrylic resins improves transverse strength and hardness.

Advancing Periodontal Care: Development of a Novel Collagen-Chitosan-Bioglass Scaffold as a Substitute for Autologous Soft Tissue Grafts.

Introduction Modern dentistry prioritizes aesthetic outcomes, making root coverage for gingival recession a key focus. Various approaches, including autologous grafts, address this issue, yet no substitute matches the properties of autogenous connective tissue grafts. The innovative collagen-chitosan-bioglass scaffold presents a promising solution, surpassing the limitations of the traditional methods. This scaffold blends the advantages of collagen with chitosan's antibacterial and regenerative properties, enhanced by bioglass, which promotes tissue healing through angiogenesis. It was evaluated for its physicochemical characteristics, as well as antioxidativeand anti-inflammatory properties, making it a promising solution for soft tissue management in dentistry. Materials and methods Chitosan, collagen, and bioglass were combined into a scaffold through the lyophilization process (freeze-drying). Chitosan was sourced from shrimp, collagen from bovine, and the bioglass 1% comprised 58% tetra-ethyl ortho silicate, 33% calcium silicate, and phosphorous pentoxide. After the scaffold was created, it was subjected to physicochemical characterization via scanning electron microscopic and infrared spectroscopic analysis. Its anti-inflammatory and antioxidantproperties were evaluated using DPPH (2,2-diphenyl -1-picrylhydrazyl) assay and by measuring the scaffold's radical scavenging activity. Results This study employed infrared spectroscopy and scanning electron microscopy techniques to analyze the sample components and their morphology. The infrared (attenuated total reflection) analysis revealed various elements confirming the presence of all the biomaterials required to fabricate the scaffold. Scanning electron microscope imaging displayed a folded-like morphology with a porous structure. The protein denaturation inhibition increased from 25% at 50 μg of scaffold weight to 45% at 200 μg of scaffold weight. Similarly, the antioxidant activity increased, with values rising from 23% at 50μg to 35% at 200μg of scaffold weight. Conclusion The fabricatedcollagen-chitosan-bioglass scaffolddemonstrates promising antioxidant andanti-inflammatory properties. These findings suggest that this scaffold holds significant potential as a viable substitute for soft tissue augmentation.

Dual-band millimetre wave MIMO antenna with reduced mutual coupling based on optimized parasitic structure and ground modification

In this study, a high-isolation dual-band (28/38 GHz) multiple-input–multiple-output (MIMO) antenna for 5G millimeter-wave indoor applications is presented. The antenna consists of two interconnected patches. The primary patch is connected to the inset feed, while the secondary patch is arc-shaped and positioned over the main patch, opposite to the feed. Both patches function in the lower 28 GHz band, while the primary patch is accountable for inducing the upper 38 GHz band. An expedited trust-region (TR) algorithm is employed to optimize the dimensions of the antenna components, ensuring the antenna operates efficiently with high reflection at both bands. The antenna demonstrates a gain exceeding 7 dBi at both frequencies. An array of four antennas is configured orthogonally to create a MIMO system with isolation surpassing 19 dB. The isolation is further enhanced through the addition of a circular parasitic patch at the front and modifications made to the ground. The TR method is employed again to optimize their parameters and achieve the desired isolation, exceeding 32 dB at both bands. The MIMO system demonstrates outstanding diversity performance at both frequencies, characterized by low values of the envelope correlation coefficient (ECC) (< 10 − 4), channel capacity loss (CCL) (< 0.03 bit/s/Hz), and total active reflection coefficient (TARC) (< − 10 dB). Additionally, it secures a diversity gain (DG) exceeding 9.99 dB. The MIMO system is manufactured and tested, showing good alignment between simulation and measurement data for all performance metrics.

Electrospun PVP Fibers as Carriers of Ca2+ Ions to Improve the Osteoinductivity of Titanium-Based Dental Implants.

Although titanium and its alloys are widely used as dental implants, they cannot induce the formation of new bone around the implant, which is a basis for the functional integrity and long-term stability of implants. This study focused on the functionalization of the titanium/titanium oxide surface as the gold standard for dental implants, with electrospun composite fibers consisting of polyvinylpyrrolidone and Ca2+ ions. Polymer fibers as carriers of Ca2+ ions should gradually dissolve, releasing Ca2+ ions into the environment of the implant when it is immersed in a model electrolyte of artificial saliva. Scanning electron microscopy, energy dispersive X-ray spectroscopy and attenuated total reflectance Fourier transform infrared spectroscopy confirmed the successful formation of a porous network of composite fibers on the titanium/titanium oxide surface. The mechanism of the formation of the composite fibers was investigated in detail by quantum chemical calculations at the density functional theory level based on the simulation of possible molecular interactions between Ca2+ ions, polymer fibers and titanium substrate. During the 7-day immersion of the functionalized titanium in artificial saliva, the processes on the titanium/titanium oxide/composite fibers/artificial saliva interface were monitored by electrochemical impedance spectroscopy. It can be concluded from all the results that the composite fibers formed on titanium have application potential for the development of osteoinductive and thus more biocompatible dental implants.

Fundamentals of Determination of the Biological Tissue Refractive Index by Ellipsoidal Reflector Method

This paper presents the theoretical fundamentals, prerequisites for creation, and peculiarities of modeling a new method for determining the refractive index of biological tissues. The method uses a mirror ellipsoid of revolution as an optical element to ensure total internal reflection phenomena. This paper thoroughly analyzes the differences in the refractive index of healthy and pathological tissues on a biometric diagnostic basis. The analysis is used to model the measurement setup’s parameters. This paper also considers various methods of determining the refractive index of biological tissues based on different principles of physical optics, such as interferometry, refractometry, ellipsometry, and goniophotometry. It systematizes typical optical elements of total internal reflection that can be used in goniophotometry. It justifies the selection of the element base for the goniometric installation based on the ellipsoidal reflector method. A simulation of the installation operation was carried out for various parameters of the ellipsoidal reflector, ensuring the measurement of the biological tissue refractive index from 1.33 to 1.7. This paper also proposes a constructive solution for manufacturing an ellipsoidal reflector of the required configuration.