Intermolecular Orbital Overlap Research Articles

Quenching and enhancement mechanisms of a novel Cd-based coordination polymer as a multiresponsive fluorescent sensor for nitrobenzene and aniline

BackgroundNitroaromatic compounds are inherently hazardous and explosive, so convenient and rapid detection strategies are needed for the sake of human health and the environment. There is an urgent demand for chemical sensing materials that offer high sensitivity, operational simplicity, and recognizability to effectively monitor nitroaromatic residues in industrial wastewater. Despite its importance, the mechanisms underlying fluorescence quenching or enhancement in fluorescent sensing materials have not been extensively researched. The design and synthesis of multiresponsive fluorescent sensing materials have been a great challenge until now. ResultsIn this study, a one-dimensional Cd-based fluorescent porous coordination polymer (Cd–CIP-1) was synthesized using 5-(4-cyanobenzyl)isophthalic acid (5-H2CIP) and 4,4′-bis(1-imidazolyl)biphenyl (4,4′-bimp) and used for the selective detection of nitrobenzene in aqueous solution by fluorescence quenching, with a limit of detection of 1.38 × 10−8 mol L−1. The presence of aniline in the Cd–CIP-1 solution leads to the enhancement of fluorescence property. Density functional theory and time-dependent density functional theory calculations were carried out to elucidate the mechanisms of the fluorescence changes. This study revealed that the specific pore size of Cd–CIP-1 facilitates analyte screening and enhances host-guest electron coupling. Furthermore, π–π interactions and hydrogen bond between Cd–CIP-1 and the analytes result in intermolecular orbital overlap and thereby boosting electron transfer efficiency. The different electron flow directions in NB@Cd–CIP-1 and ANI@Cd–CIP-1 lead to fluorescence quenching and enhancement. Significance and noveltyThe multiresponsive coordination polymer (Cd–CIP-1) can selectively detect nitrobenzene and recognize aniline in aqueous solutions. The mechanism of fluorescence quenching and enhancement has been thoroughly elucidated through a combination of density functional theory and experimental approaches. This study presents a promising strategy for the practical implementation of a multiresponsive fluorescent chemical sensor.

A defect-induced emission material with turn-on mechanoresponsive luminescence serving as a data storage

Most of the mechanoresponsive luminescent (MRL) materials function based on phase transition (crystalline-to-amorphous or crystalline-to-crystalline) or solid-state chemical reaction of the organic solid emitters. However, it is difficult to enable a turn-on type mechanoresponsive luminescence using such strategy. In this work, the defect-induced emission (DIE) of (E)-(4-((2-hydroxy-4-methoxybenzylidene)amino)phenyl)(phenyl) methanone (HMPM) was disclosed, which endows the resulting material with reversible turn-on MRL. The crystalline powder of HMPM is non-emissive, but the emission intensity can be greatly enhanced by external mechanical stimuli, showing high contrast. In the semiquantitative experiment, pressure up to 1.78 N would generate crystal defects, and further induces DIE. Crystallographic data demonstrate that the dark-state stems from the closely-connected plane-style aggregation of neighboring molecules, which allows the intermolecular orbital-overlapping to the disadvantage of radiative transition. Mechanical stimuli would destroy the plane-style aggregation to block intermolecular orbital overlap and the possible energy transfer, resulting in emission-enhancement. Taking advantage of the DIE nature, an information storage film is fabricated, capable of data-writing via mechanical force and data-erasing by fumigation treatment, showing rewritability as well as high signal contrast.

Strong Photophysical Diversity and the Role of Charge Transfer Excitons in Transition Metal Phthalocyanine β-Phases

The photophysics of the three transition metal phthalocyanines NiPc, CuPc and ZnPc in their β-phase has been studied using complementary experimental techniques: photoluminescence, optical absorption and electron-energy-loss spectroscopy. We demonstrate that the strongly different photoluminescence signal can be understood based on the different exciton dispersions, and that tiny differences in the structure and thus the intermolecular orbital overlap is able to model these differences. Our results clearly indicate a significant admixture of charge-transfer excitations to the lowest exciton state. They additionally demonstrate the need of a detailed microscopic understanding of organic semiconductors for their application potential.

Chrysenodithiophene-Based Conjugated Polymer: An Elongated Fused π-Electronic Backbone with a Unique Orbital Structure Toward Efficient Intermolecular Carrier Transport

In the current mainstream development of polymer semiconductors aiming for high charge carrier mobility, the degree of intermolecular orbital overlap has not been taken into deep consideration, sin...

Discrete Open-Shell Tris(bipyridinium radical cationic) Inclusion Complexes in the Solid State.

The solid-state properties of organic radicals depend on radical-radical interactions that are influenced by the superstructure of the crystalline phase. Here, we report the synthesis and characterization of a substituted tetracationic cyclophane, cyclobis(paraquat-p-1,4-dimethoxyphenylene), which associates in its bisradical dicationic redox state with the methyl viologen radical cation (MV•+) to give a 1:1 inclusion complex. The (super)structures of the reduced cyclophane and this 1:1 complex in the solid state deviate from the analogous (super)structures observed for the reduced state of cyclobis(paraquat-p-phenylene) and that of its trisradical tricationic complex. Titration experiments reveal that the methoxy substituents on the p-phenylene linkers do not influence binding of the cyclophane toward small neutral guests-such as dimethoxybenzene and tetrathiafulvalene-whereas binding of larger radical cationic guests such as MV•+ by the reduced cyclophane decreases 10-fold. X-ray diffraction analysis reveals that the solid-state superstructure of the 1:1 complex constitutes a discrete entity with weak intermolecular orbital overlap between neighboring complexes. Transient nutation EPR experiments and DFT calculations confirm that the complex has a doublet spin configuration in the ground state as a result of the strong orbital overlap, while the quartet-state spin configuration is higher in energy and inaccessible at ambient temperature. Superconducting quantum interference device (SQUID) measurements reveal that the trisradical tricationic complexes interact antiferromagnetically and form a one-dimensional Heisenberg antiferromagnetic chain along the a-axis of the crystal. These results offer insights into the design and synthesis of organic magnetic materials based on host-guest complexes.

Nature of Halide-Water Interactions: Insights from Many-Body Representations and Density Functional Theory.

Interaction energies of halide-water dimers, X-(H2O), and trimers, X-(H2O)2, with X = F, Cl, Br, and I, are investigated using various many-body models and exchange correlation functionals selected across the hierarchy of density functional theory (DFT) approximations. Analysis of the results obtained with the many-body models demonstrates the need to capture important close-range interactions in the regime of large intermolecular orbital overlap, such as charge transfer and charge penetration. Failure to reproduce these effects can lead to large deviations relative to reference data calculated at the coupled cluster level of theory. Decompositions of interaction energies carried out with the absolutely localized molecular orbital energy decomposition analysis (ALMO-EDA) method demonstrate that permanent and inductive electrostatic energies are accurately reproduced by all classes of XC functionals (from generalized gradient corrected (GGA) to hybrid and range-separated hybrid functionals), while significant variance is found for charge transfer energies predicted by different XC functionals. Since GGA and hybrid XC functionals predict the most and least attractive charge transfer energies, respectively, the large variance is likely due to the delocalization error. In this scenario, the hybrid XC functionals are then expected to provide the most accurate charge transfer energies. The sum of Pauli repulsion and dispersion energies is the most varied among the XC functionals, but it is found that a correspondence between the interaction energy and the ALMO-EDA total frozen energy may be used to determine accurate estimates for these contributions.

Key factors of exciplex emission: Exciton binding and intermolecular molecular orbital overlap

Key parameters of exciplex emission energy and efficiency were elucidated by synthesizing two electron donor type hosts derived from carbazole and diphenylamine. The two hosts were mixed with an electron acceptor type host to make exciplexes. Investigation of the exciplex emission characteristics revealed that the distance between the HOMO of the donor type host and the LUMO of the acceptor type host is critical to the emission energy and efficiency. The exciplex which has short intermolecular distance between HOMO and LUMO showed low emission energy and high device efficiency possibly due to strong exciton binding and extensive HOMO-LUMO overlap. Therefore, it was found that intermolecular HOMO and LUMO distance is also a key factor affecting the device performances of exciplexes.

Anisotropic thermal expansion in pentacene and perfluoropentacene: Effects of molecular packing motif and fixation at the interface

Thermal expansion coefficients of molecular solids are typically significantly larger than those of inorganic materials. Since they are furthermore highly anisotropic, the molecular arrangement and consequently the intermolecular orbital overlap strongly depend on temperature, hence also affecting the energetics of optoelectronic excitations and the efficiency of charge transfer processes. Here, we report on the precise determination of the anisotropic thermal expansion coefficients of the organic semiconductor pentacene in its solid state. We compare the thermal expansion coefficients of three different pentacene polymorphs and observe distinct differences between both pentacene bulk polymorphs and the interface-stabilized thin film phase. By comparing epitaxial films with films prepared on weakly interacting, amorphous substrates, we identify a notable influence of the substrate fixation on the thermal expansion in thin pentacene films. Furthermore, the results for pentacene are compared to the thermal expansion of perfluoropentacene, where an exceptionally large vertical thermal expansion coefficient is found in the substrate-mediated π-stacked polymorph. The present study underlines the importance of thermal expansion for the interpretation of temperature-dependent spectroscopic measurements and device characterizations since the notable changes in the unit cell geometries severely affect the intermolecular coupling and thus the excitonic energetics.

Design and Functions of Semiconducting Fused Polycyclic Furans for Optoelectronic Applications.

The fused polycyclic furan structure is a ubiquitous motif in naturally occurring organic compounds. However, they had been rarely seen in the literature of organic electronic research until very recently, probably because of the lack of stability of simple furans under conditions that the compounds experience in the active layer of the device. Nonetheless, from the viewpoint of molecular structure, furans look to have potential merits as organic semiconductors such as thiophenes, which are more popular in the organic electronic area. For example, the small atomic radius and large electronegativity of oxygen will increase intermolecular molecular orbital (MO) overlap and hence facilitate charge transporting ability in the solid state. In this Account, we describe the molecular design and optoelectronic applications of fused polycyclic furans, such as benzodifurans (BDFs), naphthodifurans (NDFs), and anthradifurans (ADFs). The molecular design that was exploited in this study crucially depends on the synthetic flexibility of a "modular" synthetic strategy that we purposely developed and reviewed in a separate report. Our synthetic strategy comprises two steps carried out in situ: cyclization of an o-alkynylphenol into a zincio benzofuran and its electrophilic Negishi-type trapping to obtain a range of multisubstituted fused furan compounds. These compounds are found to possess electronic structures resembling those of fused polyaromatic hydrocarbons, such as acenes or phenacenes, rather than oxygen-bridged phenylenevinylene, along with unique characteristics: a wide HOMO-LUMO gap originating from the weak aromaticity of the furan rings, an intense photoluminescent character, and mechanofluorochromism. Semiconducting properties of fused furans are also excellent among organic materials: some BDF derivatives show high hole mobility on the order of 10-3 cm2/(V s) in the amorphous state using time-of-flight (TOF) technique. The p-type BDFs exhibit high performance as hole-transporting material in heterojunction organic light-emitting diodes (OLEDs), while carbazole-substituted BDFs (CZBDFs) are ambipolar with well-balanced high carrier mobility for both hole and electron and serve as host materials for full-color electroluminescence in both hetero- and homojunction architectures. More π-expanded NDFs showed good crystallinity and are effective active materials for organic field-effect transistors (OFETs) with a high hole mobility of up to 3.6 cm2/(V s) using a solution process. These studies have illustrated the high potential of fused polycyclic furans in organic electronics research, which thus far have attracted much less attention than their thiophene congeners.

N,N'-Bis(2-cyclohexylethyl)naphtho[2,3-b:6,7-b']dithiophene Diimides: Effects of Substituents.

Naphtho[2,3-b:6,7-b′]dithiophene-4,5,9,10-tetracarboxylic diimide (NDTI) is a promising electron-deficient building block for n-type organic conductors, and the performance of NDTI-based field-effect transistors (FETs) is largely dependent on the substituents that alter the supramolecular organization in the solid state and, in turn, the intermolecular orbital overlap. For this reason, the rational selection of substituent on imide nitrogen atoms and/or thiophene α-positions is the key to developing superior n-type organic semiconductors. We here report new NDTI derivatives having N-(2-cyclohexylethyl) groups. Despite their one-dimensional packing structures in the solid state regardless of the presence or absence of chlorine groups at the thiophene α-positions, their FETs show promising performance with electron mobilities higher than 0.1 cm2·V−1·s−1 under ambient conditions. We also discuss how the cyclohexylethyl groups affect the packing structure in comparison with analogous n-octyl derivatives having the same number of carbon atoms.

Effects of p-(Trifluoromethoxy)benzyl and p-(Trifluoromethoxy)phenyl Molecular Architecture on the Performance of Naphthalene Tetracarboxylic Diimide-Based Air-Stable n-Type Semiconductors.

N,N'-Bis(4-trifluoromethoxyphenyl) naphthalene-1,4,5,8-tetracarboxylic acid diimide (NDI-POCF3) and N,N'-bis(4-trifluoromethoxybenzyl) naphthalene-1,4,5,8-tetracarboxylic acid diimide (NDI-BOCF3) have similar optical and electrochemical properties with a deep LUMO level of approximately 4.2 eV, but exhibit significant differences in electron mobility and molecular packing. NDI-POCF3 exhibits nondetectable charge mobility. Interestingly, NDI-BOCF3 shows air-stable electron transfer performance with enhanced mobility by increasing the deposition temperature onto the octadecyltrichlorosilane (OTS)-modified SiO2/Si substrates and achieves electron mobility as high as 0.7 cm(2) V(-1) s(-1) in air. The different mobilities of those two materials can be explained by several factors including thin-film morphology and crystallinity. In contrast to the poor thin-film morphology and crystallinity of NDI-POCF3, NDI-BOCF3 exhibits larger grain sizes and improved crystallinities due to the higher deposition temperature. In addition, the theoretical calculated transfer integrals of the intermolecular lowest unoccupied molecular orbital (LUMO) of the two materials further show that a large intermolecular orbital overlap of NDI-BOCF3 can transfer electron more efficiently than NDI-POCF3 in thin-film transistors. On the basis of fact that the theoretical calculations are consistent with the experimental results, it can be concluded that the p-(trifluoromethoxy) benzyl (BOCF3) molecular architecture on the former position of the naphthalene tetracarboxylic diimides (NDI) core provides a more effective way to enhance the intermolecular electron transfer property than the p-(trifluoromethoxy) phenyl (POCF3) group for the future design of NDI-related air-stable n-channel semiconductor.

Pressure-dependent optical investigations ofα−(BEDT-TTF)2I3: Tuning charge order and narrow gap towards a Dirac semimetal

Infrared optical investigations of $\alpha$-(BEDT-TTF)$_2$I$_3$ have been performed in the spectral range from 80 to 8000~cm$^{-1}$ down to temperatures as low as 10~K by applying hydrostatic pressure. In the metallic state, $T > 135$~K, we observe a 50\% increase in the Drude contribution as well as the mid-infrared band due to the growing intermolecular orbital overlap with pressure up to 11~kbar. In the ordered state, $T<T_{\rm CO}$, we extract how the electronic charge per molecule varies with temperature and pressure: Transport and optical studies demonstrate that charge order and metal-insulator transition coincide and consistently yield a linear decrease of the transition temperature $T_{\rm CO}$ by $8-9$~K/kbar. The charge disproportionation $\Delta\rho$ diminishes by $0.017~e$/kbar and the optical gap $\Delta$ between the bands decreases with pressure by -47~cm$^{-1}$/kbar. In our high-pressure and low-temperature experiments, we do observe contributions from the massive charge carriers as well as from massless Dirac electrons to the low-frequency optical conductivity, however, without being able to disentangle them unambiguously.

Supramolecular Packing Controls H₂ Photocatalysis in Chromophore Amphiphile Hydrogels.

Light harvesting supramolecular assemblies are potentially useful structures as components of solar-to-fuel conversion materials. The development of these functional constructs requires an understanding of optimal packing modes for chromophores. We investigated here assembly in water and the photocatalytic function of perylene monoimide chromophore amphiphiles with different alkyl linker lengths separating their hydrophobic core and the hydrophilic carboxylate headgroup. We found that these chromophore amphiphiles (CAs) self-assemble into charged nanostructures of increasing aspect ratio as the linker length is increased. The addition of salt to screen the charged nanostructures induced the formation of hydrogels and led to internal crystallization within some of the nanostructures. For linker lengths up to seven methylenes, the CAs were found to pack into 2D crystalline unit cells within ribbon-shaped nanostructures, whereas the nine methylene CAs assembled into long nanofibers without crystalline molecular packing. At the same time, the different molecular packing arrangements after charge screening led to different absorbance spectra, despite the identical electronic properties of all PMI amphiphiles. While the crystalline CAs formed electronically coupled H-aggregates, only CAs with intermediate linker lengths showed evidence of high intermolecular orbital overlap. Photocatalytic hydrogen production using a nickel-based catalyst was observed in all hydrogels, with the highest turnovers observed for CA gels having intermediate linker lengths. We conclude that the improved photocatalytic performance of the hydrogels formed by supramolecular assemblies of the intermediate linker CA molecules likely arises from improved exciton splitting efficiencies due to their higher orbital overlap.

Synthesis and FET characterization of novel ambipolar and low‐bandgap naphthalene‐diimide‐based semiconducting polymers

ABSTRACTA novel series of naphthalene‐diimide‐based semiconducting polymers (P1–P4) containing benzodithiophene or dithienopyrrole were successfully synthesized for ambipolar semiconducting materials showing near infrared absorptions. The incorporation of a 3‐hexylthiophene (3HT) spacer extended the intramolecular charge‐transfer (ICT) peak from λonset = 739 nm (P1) to 785 nm (P3). Moreover, about 250 nm red‐shift of the ICT peaks was observed in P2 and P4 compared to P1 and P3 due to the increased high‐lying HOMO energy levels. The grazing incidence X‐ray scattering of the P3 and P4 films proved the slightly improved crystalline order in the π−π stacking direction, indicating that the planar backbone is probably due to the introduced 3HT. The P1–P4‐based field‐effect transistor showed n‐type dominant ambipolar characteristics. The P2 and P4 showed higher electron mobilities up to 1.5 × 10−2 cm2 V−1 s−1 than P1 and P3, which might be influenced by the orientation of the polymer backbone and the intermolecular orbital overlap. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016, 54, 359–367

Effect of Molecular Stacking on Exciton Diffusion in Crystalline Organic Semiconductors.

Exciton diffusion is at the heart of most organic optoelectronic devices' operation, and it is currently the most limiting factor to their achieving high efficiency. It is deeply related to molecular organization, as it depends on intermolecular distances and orbital overlap. However, there is no clear guideline for how to improve exciton diffusion with regard to molecular design and structure. Here, we use single-crystal charge-transfer interfaces to probe favorable exciton diffusion. Photoresponse measurements on interfaces between perylenediimides and rubrene show a higher photocurrent yield (+50%) and extended spectral coverage (+100 nm) when there is increased dimensionality of the percolation network and stronger orbital overlap. This is achieved by very short interstack distances in different directional axes, which favors exciton diffusion by a Dexter mechanism. Even if the core of the molecule shows strong deviation from planarity, the similar electrical resistance of the different systems, planar and nonplanar, shows that electronic transport is not compromised. These results highlight the impact of molecular organization in device performance and the necessity of optimizing it to take full advantage of the materials' properties.

First-principles investigations on the anisotropic charge transport in 4,4′-bis((E)-2-(naphthalen-2-yl)vinyl)-1,1′-biphenyl single crystal

We applied the master equation method to investigate the anisotropic transport property of the 4,4′-bis((E)-2-(naphthalen-2-yl)vinyl)-1,1′-biphenyl molecular crystal based on first-principles calculation. It is found that the hole mobility has the largest value along the [100] direction, while electrons have the best transport property along the [010] direction. The anisotropic transport property was found to have close relationship with the charge transfer integral which is determined by the molecular stacking network in the crystals as well as the intermolecular frontier orbital overlap. In addition, the effect of the charge carrier density and the electronic field on the charge transport was also studied, and little effect was found except that the density is larger than 0.01 and the electronic field is increased to 1.0 × 106 V/cm. The kinetic Monte Carlo simulation method has also been used to study the anisotropic charge transport property, and consistent results were obtained as with the master equation method.

ChemInform Abstract: Organic Semiconductors Based on [1]Benzothieno[3,2‐b][1]benzothiophene Substructure

AbstractReview: design, synthesis, and characterization; 54 refs.

Organic semiconductors based on [1]benzothieno[3,2-b][1]benzothiophene substructure.

The design, synthesis, and characterization of organic semiconductors applicable to organic electronic devices, such as organic field-effect transistors (OFETs) and organic photovoltaics (OPVs), had been one of the most important topics in materials chemistry in the past decade. Among the vast number of materials developed, much expectation had been placed on thienoacenes, which are rigid and planar structures formed by fusing thiophenes and other aromatic rings, as a promising candidate for organic semiconductors for high-performance OFETs. However, the thienoacenes examined as an active material in OFETs in the 1990s afforded OFETs with only moderate hole mobilities (approximately 0.1 cm(2) V(-1) s(-1)). We speculated that this was due to the sulfur atoms in the thienoacenes, which hardly contributed to the intermolecular orbital overlap in the solid state. On the other hand, we have focused on other types of thienoacenes, such as [1]benzothieno[3,2-b][1]benzothiophene (BTBT), which seem to have appropriate HOMO spatial distribution for effective intermolecular orbital overlap. In fact, BTBT derivatives and their related materials, including dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT), have turned out to be superior organic semiconductors, affording OFETs with very high mobilities. To illustrate some examples, we have developed 2,7-diphenyl BTBT (DPh-BTBT) that yields vapor-deposited OFETs having mobilities of up to 2.0 cm(2) V(-1) s(-1) under ambient conditions, highly soluble dialkyl-BTBTs (Cn-BTBTs) that afford solution-processed OFETs with mobilities higher than 1.0 cm(2) V(-1) s(-1), and DNTT and its derivatives that yield OFETs with even higher mobilities (>3.0 cm(2) V(-1) s(-1)) and stability under ambient conditions. Such high performances are rationalized by their solid-state electronic structures that are calculated based on their packing structures: the large intermolecular orbital overlap and the isotropic two-dimensional electronic structure are the key regardless of the molecular size and substituents on the BTBT and its related thienoacene cores. Along with the discovery of such attracting performances, versatile and practical methods for the synthesis of BTBT and its derivatives, and the π-extended derivatives including DNTT, dianthra[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DATT), and the thienoacenes with two thieno[3,2-b]thiophene moieties, have been developed. In addition, the materials have been recently utilized in sophisticated devices and circuits, including all-printed transistor arrays, flexible circuits on ultrathin plastic substrates, and biomedical applications, underscoring their promise as practical semiconductors for electronic device applications. These exciting results of the present BTBT-based materials are expected to open doors to new horizons of organic semiconductors in terms of practical application and the design and synthesis of far more superior materials.

Effects of Aromatic Trifluoromethylation, Fluorination, and Methylation on Intermolecular π–π Interactions

Marcus theory states that the rate of charge transfer is directly proportional to the amount of intermolecular orbital overlap. Theoretically optimizing the electronic coupling through the orientation and distance which both can increase the frontier orbital overlap between molecules is an attractive route to potentially provide theoretical insight for discovering new high performance semiconductor materials. To investigate how these parameters qualitatively affect charge transfer of model systems, unconstrained dimer optimizations with MP2 and dispersion-corrected DFT methods were used to probe the π-π interactions of methylated, fluorinated, and trifluoromethylated benzene, pyridine, and bipyridine dimers. These systems can serve as simplified models representing weak noncovalent interactions in organic semiconductor materials. Enhanced intermolecular interaction energies, reduced π-π distances, and more favorable cofacial orientations were found with the trifluoromethylated dimers compared to fluorinated and methylated dimers studied. Similar effects were found with donor-acceptor pairs that represent organic p-n heterojunction systems. These enhanced π-π interactions are likely caused by increased molecular quadrupole moment and dispersion interaction associated with trifluoromethylation. This computational study illustrates the strong potential of trifluoromethylation and, possibly perfluoroalkylation of acenes and heteroacenes, leading qualitatively to enhanced electron transfer through better π-π stacked structures, making them viable candidates for use as n-type organic semiconductor materials. The findings also provide insight for fundamental interactions between drug molecules that include fluorinated and trimethylfluorinated aromatics binding to protein receptors.

Band Formation in a Molecular Quantum Well via 2D Superatom Orbital Interactions

By scanning tunneling microscopy and spectroscopy, we study nearly free electron band formation of the σ* lowest unoccupied molecular orbital of C6F6 on a Cu(111) surface. In fractal islands, the lowest unoccupied molecular orbital energy systematically stabilizes with the number of interacting near-neighbor C6F6 molecules. Density functional theory calculations reveal the origin of effective intermolecular orbital overlap in the previously unrecognized superatom character of the σ* orbital of C6F6 molecules. The discovery of superatom orbitals in planar molecules offers a new universal principle for effective band formation, which can be exploited in designing organic semiconductors with nearly free electron properties.