Interface Scheme Research Articles

Conjugate heat and mass transfer in the lattice Boltzmann equation method.

An interface treatment for conjugate heat and mass transfer in the lattice Boltzmann equation method is proposed based on our previously proposed second-order accurate Dirichlet and Neumann boundary schemes. The continuity of temperature (concentration) and its flux at the interface for heat (mass) transfer is intrinsically satisfied without iterative computations, and the interfacial temperature (concentration) and their fluxes are conveniently obtained from the microscopic distribution functions without finite-difference calculations. The present treatment takes into account the local geometry of the interface so that it can be directly applied to curved interface problems such as conjugate heat and mass transfer in porous media. For straight interfaces or curved interfaces with no tangential gradient, the coupling between the interfacial fluxes along the discrete lattice velocity directions is eliminated and thus the proposed interface schemes can be greatly simplified. Several numerical tests are conducted to verify the applicability and accuracy of the proposed conjugate interface treatment, including (i) steady convection-diffusion in a channel containing two different fluids, (ii) unsteady convection-diffusion in the channel, (iii) steady heat conduction inside a circular domain with two different solid materials, and (iv) unsteady mass transfer from a spherical droplet in an extensional creeping flow. The accuracy and order of convergence of the simulated interior temperature (concentration) field, the interfacial temperature (concentration), and heat (mass) flux are examined in detail and compared with those obtained from the "half-lattice division" treatment in the literature. The present analysis and numerical results show that the half-lattice division scheme is second-order accurate only when the interface is fixed at the center of the lattice links, while the present treatment preserves second-order accuracy for arbitrary link fractions. For curved interfaces, the present treatment yields second-order accurate interior and interfacial temperatures (concentrations) and first-order accurate interfacial heat (mass) flux. An increase of order of convergence by one degree is obtained for each of these three quantities compared with the half-lattice division scheme. The surface-averaged Sherwood numbers computed in test (iv) agree well with published results.

(Invited) Passivation Schemes for Ge High-K Metal Gate MOSFETs on Si for VLSI Production

As Si Metal Oxide Semiconducting Field Effect Transistors (MOSFETs) have continued to scale Short Channel Effects (SCE) have become exacerbated by the inability to continue scaling the Equivalent Oxide Thickness (EOT) of the device significantly beyond what was realized with the introduction of High K Metal Gate (HKMG) MOSFETs at the 45nm technology node. Since EOT scaling has not kept pace with the gate length (Lg) scaling needed to continually increase the transistor drive current, device makers have instead elected to introduce FinFET and Tri-Gate transistors with inherently better electrostatic control in order to realize reasonable SCE in the device. High mobility channel materials, such as Ge, are attracting increasing interest due to the possibility of realizing increased performance even without scaling the Lg of the device (1). Ge is particularly attractive for use as a channel material for P-type MOSFETs (PMOSFETs) due to its high hole mobility and Si processing compatibility. In fact, we have demonstrated experimental PMOSFET devices with hole mobilities significantly higher than what can be obtained on Si, Fig. 1. However, a significant remaining challenge to incorporating Ge into VLSI production is obtaining a stable and well-passivated dielectric/semiconductor interface using tooling and substrates compatible with current 300mm Si VLSI High Volume Manufacturing (HVM) in order to achieve reasonable device performance at sub 1nm EOTs (2). In this paper we will report progress on surface passivation and functionalization of Ge channel surfaces, as well as High K dielectric layer growth by Atomic Layer Deposition (ALD) and the resulting electrical properties measured by fabricated MOSFETs and Metal Oxide Semiconducting Capacitors (MOSCAPs). The Ge channel devices were formed on 300 mm Si wafers using Ge grown by an epitaxial process including a graded SiGe buffer layer. We have utilized a TEL CertasTMChemical Oxide Removal (COR) process (3), which uses dry HF and ammonia, rather than traditional wet cleaning, to remove Ge native oxides without damaging or roughening the fragile Ge surface. We have also studied Ge oxide interface layer formation by plasma oxidation using a Slot Plane Array (SPA) antenna (4) utilizing in-line X-ray Photoelectron Spectroscopy (XPS) to measure Ge and high K oxide thickness on monitor wafers fashioned by the same Ge epitaxial process used to make the electrical devices and compared it to the equivalent Si oxidation process, Fig. 2. Various other passivation and interface schemes were investigated and will be discussed, contrasted and compared including ozone oxidation, Al oxide passivation/interface layers, SPA plasma nitridation, and thin amorphous Si passivation layers. We have utilized Hf oxide grown by a previously reported ALD process (5) as the High K dielectric for our devices, and TiN as the metal gate. Our results show that Ge channel devices can be fabricated on 300mm Si substrates using Si VLSI-compatible toolsets and infrastructure and resulting in reasonable device characteristics, Fig. 3. Thus, Ge channel MOSFETs are found to be a promising technology for use in HVM at future VLSI technology nodes.

친수성/소수성 수평 표면상에서의 액적이송에 관한 새로운 개념

유체이송 기술은 최근 마이크로 유체시스템 개발에서 핵심문제로 인식되고 있다. 본 논문에서는 외부동력을 사용하지 않고 액적을 이송시킬 수 있는 새로운 개념을 제안하고, 수치해석을 통해 증명하였다. 제안된 장치는 표면을 단순하게 친수성과 소수성 표면의 복합표면으로 구성하는 것이다. 새로운 개념을 입증하기 위한 수치해석은 보존적인 압력기반 유한체적방법에 기초한 비정렬 셀 중심 방법 및 VOF 방법에 체적포착법인 CICSAM을 채용하고 있는 자체개발 코드(PowerCFD)를 사용하였다. 연구결과 본 연구에서 제안된 개념이 마이크로 유체시스템에서 액적이송에 대해 우수한 성능을 나타내는 것으로 확인되었다.

Top-orthogonal-to-bottom-electrode (TOBE) CMUT arrays for 3-D ultrasound imaging

Two-dimensional ultrasound arrays hold great promise for 3-D imaging; however, wiring of each channel becomes impractical for large arrays or for small-footprint catheter probes for which the number of wires must be limited. Capacitive micromachined ultrasound transducers offer a promising solution for such 2-D array applications, but channel routing is still non-trivial. A top-orthogonal-to-bottom-electrode (TOBE) 2-D CMUT array architecture is presented along with row-column addressing schemes for low-channel-count 3-D ultrasound imaging. An N × N TOBE array is capable of obtaining 3-D images using only 2N channels. An interfacing scheme is presented in which transmit-receive signals are routed along rows while bias voltages are applied along columns, effectively allowing for single-element transmit/receive control. Simulations demonstrated potentially finer resolution and improved side lobe suppression over a previously published row-column-based imaging method. Laser vibrometer testing was done to measure membrane displacement in air and confirmed that single-element air-coupled actuation in transmit mode could be achieved using our proposed interfacing scheme. Acoustic testing was also performed in both transmit and receive modes to characterize the ability of the proposed interfacing scheme to achieve dominant-element transmission and reception in immersion operation. It was seen that membrane displacement in both modes was indeed largely confined to the active area.

The "EyeCane", a new electronic travel aid for the blind: Technology, behavior & swift learning.

Independent mobility is one of the most pressing problems facing people who are blind. We present the EyeCane, a new mobility aid aimed at increasing perception of environment beyond what is provided by the traditional White Cane for tasks such as distance estimation, navigation and obstacle detection. The "EyeCane" enhances the traditional White Cane by using tactile and auditory output to increase detectable distance and angles. It circumvents the technical pitfalls of other devices, such as weight, short battery life, complex interface schemes, and slow learning curve. It implements multiple beams to enables detection of obstacles at different heights, and narrow beams to provide active sensing that can potentially increase the user's spatial perception of the environment. Participants were tasked with using the EyeCane for several basic tasks with minimal training. Blind and blindfolded-sighted participants were able to use the EyeCane successfully for distance estimation, simple navigation and simple obstacle detection after only several minutes of training. These results demonstrate the EyeCane's potential for mobility rehabilitation. The short training time is especially important since available mobility training resources are limited, not always available, and can be quite expensive and/or entail long waiting periods.

Towards visual analytics for digging into human rights violations data

Towards visual analytics for digging into human rights violations data

High order FDTD methods for transverse magnetic modes with dispersive interfaces

A new finite-difference time-domain (FDTD) algorithm is introduced to solve two dimensional (2D) transverse magnetic (TM) modes with a straight dispersive interface. Driven by the consideration of simplifying interface jump conditions, the auxiliary differential equation of the Debye constitution model is rewritten to form a new Debye–Maxwell TM system. Interface auxiliary differential equations are utilized to describe the transient changes in the regularities of electromagnetic fields across a dispersive interface. The resulting time dependent jump conditions are rigorously enforced in the FDTD discretization by means of a matched interface and boundary scheme. Higher order convergences are numerically achieved for the first time in the literature in 2D FDTD simulations of dispersive inhomogeneous media.

Multiple Virtual Interfaces for Multi-homing Hosts to Support Inter-technology Handover in PMIPv6 Network

Proxy Mobile IPv6 (PMIPv6), a network-based mobility management protocol, supports multi-homing, inter-technology handover, and flow mobility, with the help of a host's virtual interface (VI). Several single virtual interface (SVI) schemes have been proposed to support these functions. In the SVI schemes, the link-layer identifier (LL-ID) should be swapped while the host is processing neighbor discovery (ND) after inter-technology handover or flow mobility. That is, a host must replace the LL-ID of a VI contained in a neighbor advertisement with the LL-ID of a physical interface (PI) related to a real connection. Such LL-ID swapping cannot be executed under secure neighbor discovery, and it causes ND processing delay and high overhead to check all outgoing packets. In this paper, we propose a multiple virtual interfaces scheme to solve the problem related to the LL-ID swapping, and to provide good support to the inter-technology handover. In the proposed scheme, there are the same numbers of VIs as the PIs between the data link layer and the network layer of a host. Since each VI maintains its own neighbor cache, the proposed scheme does not require LL-ID swapping, so that it can keep the standard ND process. We explain the basic operation of PMIPv6 inter-technology handover under the proposed scheme and, through NS-3 simulation, evaluate the performance of the proposed scheme in terms of ND process delay and inter-technology handover latency.

Semi-Automatic Road/Pavement Modeling using Mobile Laser Scanning

Abstract. Scene analysis, in urban environments, deals with street modeling and understanding. A street mainly consists of roadways, pavements (i.e., walking areas), facades, still and moving obstacles. In this paper, we investigate the surface modeling of roadways and pavements using LIDAR data acquired by a mobile laser scanning (MLS) system. First, road border detection is considered. A system recognizing curbs and curb ramps while reconstructing the missing information in case of occlusion is presented. A user interface scheme is also described, providing an effective tool for semi-automatic processing of large amount of data. Then, based upon road edge information, a process that reconstructs surfaces of roads and pavements has been developed, providing a centimetric precision while reconstructing missing information. This system hence provides an important knowledge of the street, that may open perspectives in various domains such as path planning or road maintenance.

Voltage Booster Schemes for Fault Ride-Through Enhancement of Variable Speed Wind Turbines

This paper presents series grid interface topologies for enhancing the fault ride-through (FRT) performance of doubly-fed induction generator (DFIG)-based wind turbines (WTs). Two voltage booster schemes, 1) dynamic voltage restorer (DVR) and 2) resistive type high temperature superconducting fault current limiter (HTS-FCL), are designed and implemented. The test system represents a WT connected to an electric grid with alternatively employing DVR and HTS-FCL. Both schemes provide fast mitigation of voltage dip that maintains the nominal operating conditions for DFIG-WT. To achieve a flexible control solution for balanced and unbalanced fault conditions, the DVR employs positive and negative sequence controllers while the HTS-FCL is designed to perform fast quenching for each phase individually. The potential of the two booster schemes is evaluated and analyzed in positive and negative sequence reference frames. Comprehensive simulation studies are presented to verify the capability of the series grid interface schemes for ensuring the normal operation and smooth wind power evacuation with effective isolation from grid faults. Furthermore, the grid code requirements of reactive current support are evaluated for both schemes at various fault scenarios.

A discontinuous Galerkin conservative level set scheme for interface capturing in multiphase flows

The accurate conservative level set (ACLS) method of Desjardins et al. [O. Desjardins, V. Moureau, H. Pitsch, An accurate conservative level set/ghost fluid method for simulating turbulent atomization, J. Comput. Phys. 227 (18) (2008) 8395–8416] is extended by using a discontinuous Galerkin (DG) discretization. DG allows for the scheme to have an arbitrarily high order of accuracy with the smallest possible computational stencil resulting in an accurate method with good parallel scaling. This work includes a DG implementation of the level set transport equation, which moves the level set with the flow field velocity, and a DG implementation of the reinitialization equation, which is used to maintain the shape of the level set profile to promote good mass conservation. A near second order converging interface curvature is obtained by following a height function methodology (common amongst volume of fluid schemes) in the context of the conservative level set. Various numerical experiments are conducted to test the properties of the method and show excellent results, even on coarse meshes. The tests include Zalesak’s disk, two-dimensional deformation of a circle, time evolution of a standing wave, and a study of the Kelvin–Helmholtz instability. Finally, this novel methodology is employed to simulate the break-up of a turbulent liquid jet.

Intra-panel interface with clock-embedded differential signalling for large size digital television

For large size digital television, an intra-panel interface scheme with clock-embedded differential signalling is developed which connects a timing controller and column data driver at 2.0 Gbps. A two-wire differential data channel has tri-level and clock information is embedded in it. Embedded clocking eliminates the skew between data channel and clock, which makes the clock-data recovery very simple. A prototype chip has been implemented in a standard 45-nm CMOS technology.

H∞ Robust Control of DC- AC Interfaced Microsource in Microgrids

This paper focuses on the direct current - alternating current (DC-AC) interfaced microsource based H? robust control strategies in microgrids. It presents detail of a DC-AC interfaced microsource model which is connected to the power grid through a controllable switch. A double loop current-regulated voltage control scheme for the DC-AC interface is designed. In the case of the load disturbance and the model uncertainties, the inner voltage and current loop are produced based on the H? robust control strategies. The outer power loop uses the droop characteristic controller. Finally, the scheme is simulated using the Matlab/Simulink. The simulation results demonstrate that DC-AC interfaced microsource system can supply high quality power. Also, the proposed control scheme can make the system switch smoothly between the isolated mode and grid-connected mode.

Integrated higher‐order pulse‐width modulation filter–transformer structure for single‐phase static compensator

A power filter is necessary to connect the output of a power converter to the grid so as to reduce the harmonic distortion introduced in the line current and voltage by the power converter. Many a times, a transformer is also present before the point of common coupling. Magnetic components often constitute a significant part of the overall weight, size and cost of the grid interface scheme. So, a compact inexpensive design is desirable. A higher-order LCL-filter and a transformer are increasingly being considered for grid interconnection of the power converter. This study proposes a design method based on a three-winding transformer, that generates an integrated structure that behaves as an LCL-filter, with both the filter inductances and the transformer that are merged into a single electromagnetic component. The parameters of the transformer are derived analytically. It is shown that along with a filter capacitor, the transformer parameters provide the filtering action of an LCL-filter. A single-phase full-bridge power converter is operated as a static compensator for performance evaluation of the integrated filter transformer. A resonant integrator-based single-phase phase locked loop and stationary frame AC current controller are employed for grid frequency synchronisation and line current control, respectively.

유체-구조 반복해석법에 의한 유연 프로펠러의 설계 알고리듬 개발

Flexible composite propellers are subject to large deformation under heavy loading, and hence the hydrodynamic performance of deformed propeller might deviate from that of the metallic propeller under negligible deformation. To design the flexible propeller, it is therefore necessary to be able to evaluate the structural response of the blades to the hydrodynamic loadings, and then the influence of the blade deformation upon the hydrodynamic loadings. We use the lifting-surface-theory-based propeller analysis and design codes in solving the hydrodynamic problem, and the finite-element-method program formulated with 20-node iso-parametric solid elements for the analysis of the structural response. The two different hydrodynamic and structural programs are arranged to communicate through the carefully-designed interface scheme which leads to the derivation of the geometric parameters such as the pitch, the rake and the skew distributions common to both programs. The design of flexible propellers, suitable for manufacturing, is shown to perform the required thrust performance when deformed in operation. Sample design shows the fast iteration scheme and the robustness of the design procedure of the flexible propellers.

벽면부착에 의해 야기되는 다상유동에 관한 수치적 연구

본 연구에서는 벽면부착에 의해 야기되는 다상유동에 대한 수치적 연구를 제시한다. 먼저 다상유동 해석을 위해 표면장력에 대한 CSF(Continuum Surface Force) 모델 및 벽면부착 경계조건 모델을 비정렬격자계에 적합하도록 수치해석방법을 정립시키고, Myong(2009)이 개발한 비정렬격자계와 VOF 방법으로 체적포착법(volume capturing method)을 사용한 수치해석방법(코드)에 삽입하였다. 또한 본 수치해석방법을 사용하여 중력을 포함하여 어떤 외력도 존재하지 않고 오직 벽면부착에 의해 야기되는 유동현상인 원통형 탱크의 바닥에 위치한 얕은 물풀(water pool)에 대해 물이 벽면을 적시는 경우와 적시지 않는 경우에 대해 수치해석 하였다. 연구결과, 본 수치해석방법은 벽면부착에 의해 야기되는 다상유동 문제에 대한 유용성이 입증되었다.

Iterative Channel Estimation with Frequency Replacement for SC-FDMA Systems

Single-carrier frequency division multiple access (SC-FDMA) is an attractive air interface scheme for broadband wireless communications. For the coherent demodulation of SC-FDMA systems, the receiver performs channel estimation to obtain the channel frequency response by using the reference signals multiplexed in the transmitted signal. In this paper, we propose an iterative frequency domain channel estimation scheme for SC-FDMA systems. To prevent severe noise enhancements due to the Gaussianity of the frequency domain data signal, we consider two low complexity algorithms, namely, hard and soft frequency replacements. We first analytically derive the mean square error (MSE) to characterize the effects of frequency replacement and post iterative filtering. By analyzing MSE performance, we present a design framework to develop the optimal frequency replacement. Based on the design framework, hard and soft frequency replacement algorithms are optimized in the MSE sense. Then, their low complexity adaptation methods are proposed for practical SC-FDMA systems, where the proposed frequency replacement is performed according to the reliability of the data estimates. Simulation results show that the proposed iterative channel estimation techniques effectively compensate for noise enhancements, and thus give good MSE and frame error rate performances.

Numerical simulation of multiphase flows with material interface on an unstructured grid system

Two-dimensional multiphase flows with material interface due to density difference are numerically simulated on an unstructured grid system by a Navier-Stokes solver developed by Myong and Kim (2006), since numerical computation for these flows is still known to be difficult, especially if the interface separates fluids of large different densities. This solver employs an unstructured cell-centered method based on a conservative pressure-based finite volume method, since the unstructured grid approach makes the solver very flexible in dealing with complex boundaries, and adopts a high resolution method (CICSAM) in a volume of fluid (VOF) scheme for the accurate phase interface capturing. The test cases are the Rayleigh-Taylor instability (density ratio of 2), the oil bubble rising in a partially filled container (density ratio of 2), the air bubble rising in a fully filled container with bubble shedding (density ratio of 100) and the droplet splash (density ratio of about 1000), which are typical benchmark problems among multiphase flows with material interface due to density difference. The present results are compared with other numerical solutions found in the literature. The present method (solver) efficiently and accurately simulates complex interface flows such as multiphase flows with material interface due to both density difference and instability.

PMIPv6 도메인에서 플로우 이동성 지원을 위한 논리인터페이스 기반 HNP 변환 기법

Recently, wireless multi-networking technology has been studied for supporting multi-interface in mobile node. As the related work, in the IETF NetExt WG, the extension of Proxy Mobile IPv6 protocol for supporting flow mobility is actively on going in discussion. PMIPv6 protocol supports simultaneous access through the multi-interface in a mobile node and inter-technology handover between multiple interfaces. However, this protocol can not support flow mobility. Thus, in this paper, when a mobile node connects to PMIPv6 domain through multi-interface, as a way to support flow mobility, the design of logical interface and Home Network Prefix change scheme based on logical interface are proposed, We show that the proposed scheme can perform flow mobility service without end-to-end disconnection in PMIPv6 domain.

A 1.7 Gbps DLL-Based Clock Data Recovery for a Serial Display Interface in 0.35-μm CMOS

This paper presents a delay-locked-loop–based clock and data recovery (CDR) circuit design with a nB(n+2)B data formatting scheme for a high-speed serial display interface. The nB(n+2)B data is formatted by inserting a ‘01’ clock information pattern in every piece of N-bit data. The proposed CDR recovers clock and data in 1:10 demultiplexed form without an external reference clock. To validate the feasibility of the scheme, a 1.7-Gbps CDR based on the proposed scheme is designed, simulated, and fabricated. Input data patterns were formatted as 10B12B for a high-performance display interface. The proposed CDR consumes approximately 8 mA under a 3.3-V power supply using a 0.35-μm CMOS process and the measured peak-to-peak jitter of the recovered clock is 44 ps.