Interface For Liquid Chromatography Research Articles

A novel compact mass detection platform for the open access (OA) environment in drug discovery and early development

A new ‘compact mass detector’ co-developed with an instrument manufacturer (Waters Corporation) as an interface for liquid chromatography (LC), specifically Ultra-high performance LC® (UPLC® or UHPLC) analysis was evaluated as a potential new Open Access (OA) LC–MS platform in the Drug Discovery and Early Development space. This new compact mass detector based platform was envisioned to provide increased reliability and speed while exhibiting significant cost, noise, and footprint reductions. The new detector was evaluated in batch mode (typically 1–3 samples per run) to monitor reactions and check purity, as well as in High Throughput Screening (HTS) mode to run 24, 48, and 96 well plates. The latter workflows focused on screening catalysis conditions, process optimization, and library work. The objective of this investigation was to assess the performance, reliability, and flexibility of the compact mass detector in the OA setting for a variety of applications. The compact mass detector results were compared to those obtained by current OA LC–MS systems, and the capabilities and benefits of the compact mass detector in the open access setting for chemists in the drug discovery and development space are demonstrated.

A new interface for coupling solid phase microextraction with liquid chromatography

A modified Rheodyne 7520 microsample injector was used as a new solid phase microextraction (SPME)–liquid chromatography (LC) interface. The modification was focused on the construction of a new sample rotor, which was built by gluing two sample rotors together. The new sample rotor was further reinforced with 3 pieces of stainless steel tubing. The enlarged central flow passage in the new sample rotor was used as a desorption chamber. SPME fiber desorption occurred in static mode. But all desorption solvent in the desorption chamber was injected into LC system with the interface. The analytical performance of the interface was evaluated by SPME–LC analysis of PAHs in water. At least 90% polycyclic aromatic hydrocarbons (PAHs) were desorbed from a polyacrylonitrile (PAN)/C18 bonded fuse silica fiber in 30s. And injection was completed in 20s. About 10–20% total carryovers were found on the fiber and in the interface. The carryover in the interface was eliminated by flushing the desorption chamber with acetonitrile at 1mLmin−1 for 2min. The repeatability of the method was from 2% to 8%. The limit of detection (LOD) was in the mid pgmL−1 range. The linear ranges were from 0.1 to 100ngmL−1. The new SPME–LC interface was reliable for coupling SPME with LC for both qualitative and quantitative analysis.

Recent advances in speciation analysis of mercury, arsenic and selenium

Mercury (Hg), arsenic (As) and selenium (Se) are ubiquitous in the environment and exist in a variety of species, which have great influence on their transport, bioaccumulation and toxicity. This review presents the recent research progress in speciation analysis of Hg, As, and Se, with emphasis on enhanced cold vapor generation as interface for liquid chromatography and atomic spectrometry, speciation of volatile species in gas phase, and isotope dilution technique to improve the precision and accuracy of speciation. Hyphenated techniques to characterize the complexes of Hg and As with phytochelatins and chromatographic separation coupled with multi-collector-inductively coupled plasma mass spectrometry to measure species-specific isotopic ratios, are also briefly discussed.

Improvement of solid phase microextraction fiber assembly and interface for liquid chromatography

Modifications were made on commercial SPME fiber assembly and SPME–LC interface to improve the applicability of SPME for LC. Polyacrylonitrile (PAN)/C18 bonded fuse silica was used as the fiber coating for LC applications because the fiber coating was not swollen in common LC solvents at room temperature. The inner tubing of SPME fiber assembly was replaced with a 457μm outside diameter (o.d.) solid nitinol rod. And the coated fiber (o.d. 290μm) was installed onto the nitinol rod. The inner diameter (i.d.) of the through hole of the ferrule in the SPME–LC interface was enlarged to 508μm to accommodate the nitinol rod. The much larger inner rod protected the fiber coating from being stripped when the fiber was withdrawn from the SPME–LC interface. The system was evaluated in term of pressure test, desorption optimization, peak shape, carryovers, linear range, precision, and limit of detection (LOD) with polycyclic aromatic hydrocarbons (PAHs) as the test analytes. The results demonstrated that the improved system was robust and reliable. It overcame the drawbacks, such as leak of solvents and damage of fiber coatings, associated with current SPME fibers and SPME–LC interface. Another sealing mechanism was proposed by sealing the nitinol rod with a specially designed poly(ether ether ketone) (PEEK) fitting. The device was fabricated and tested for manual use.

Plastic microchip liquid chromatography-matrix-assisted laser desorption/ionization mass spectrometry using monolithic columns

A prototype array of monolithic liquid chromatography (LC) columns was prepared in a plastic microfluidic device for the off-line interface with matrix assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS). The microfluidic channels were fabricated on a cyclic olefin copolymer (COC) plate by hot embossing. An array of methacrylate monolithic columns was prepared in the microfluidic channels by UV-initiated polymerization. The deposition system employed a pulsed electric field to transfer the effluents from multiple columns directly onto MALDI targets with a non-contact deposition method reported by Ericson et al. [C. Ericson, Q.T. Phung, D.M. Horn, E.C. Peters, J.R. Fitchett, S.B. Ficarro, A.R. Salmon, L.M. Brill, A. Brock, Anal. Chem. 75 (2003) 2309]. To characterize the off-line interface of the multiple-channel microchip LC and the MALDI-MS for the analysis of peptide mixtures, the separation efficiency and reproducibility tests in each column were carried out by separating a peptide mixture from tryptic digested proteins and depositing the multiple effluents simultaneously on the MALDI target plate. Using a MALDI-TOF mass spectrometer with a mass accuracy of ±1 Da for peptide assignments of digested bovine serum albumin (BSA), amino acid sequence coverage of around 59% was obtained for the microchip LC-MALDI-MS compared to 23% obtained by the MALDI-MS method without LC separation. In sensitivity tests for the detection of low abundance proteins in the presence of high concentration protein mixtures, as low as 10 fmol/μl (S/N = 10) of a spiked peptide in 1 μg of digested BSA could be detected. In the analysis of a mixture of three digested proteins (BSA, myoglobin, and cytochrome c), more than twice the amino acid sequence coverage was obtained for the microchip LC-MALDI-MS compared to MALDI-MS alone.

Isotope ratio monitoring of small molecules and macromolecules by liquid chromatography coupled to isotope ratio mass spectrometry

In the field of isotope ratio mass spectrometry, the introduction of an interface allowing the connection of liquid chromatography (LC) and isotope ratio mass spectrometry (IRMS) has opened a range of new perspectives. The LC interface is based on a chemical oxidation, producing CO2 from organic molecules. While first results were obtained from the analysis of low molecular weight compounds, the application of compound-specific isotope analysis by irm-LC/MS to other molecules, in particular biomolecules, is presented here. The influence of the LC flow rate on the CO2 signal and on the observed delta13C values is demonstrated. The limits of quantification for angiotensin III and for leucine were 100 and 38 pmol, respectively, with a standard deviation of the delta13C values better than 0.4 per thousand. Also, accuracy and precision of delta13C values for elemental analyser-IRMS and flow injection analysis-IRMS (FIA-LC/MS) were compared. For compounds with molecular weights ranging from 131 to 66,390 Da, precision was better than 0.3 per thousand, and accuracy varied from 0.1 to 0.7 per thousand. In a second part of the work, a two-dimensional (2D)-LC method for the separation of 15 underivatised amino acids is demonstrated; the precision of delta13C values for several amino acids by irm-LC/MS was better than 0.3 per thousand at natural abundance. For labelled mixtures, the coefficient of variation was between 1% at 0.07 atom % excess (APE) for threonine and alanine, and around 10% at 0.03 APE for valine and phenylalanine. The application of irm-LC/MS to the determination of the isotopic enrichment of 13C-threonine in an extract of rat colon mucosa demonstrated a precision of 0.5 per thousand, or 0.001 atom %.

Comparison of sonic spray lonization with atmospheric pressure chemical lonization as an interface of liquid chromatography-mass spectrometry for the analysis of some local anesthetics

Sonic spray ionization (SSI) was compared with atmospheric pressure chemical ionization (APCI) as an interface for liquid chromatography (LC)-mass spectrometry (MS) for the analysis of some local anesthetics. Peaks at [M+H]+ constituted the base peaks for all compounds by both SSI and APCI, except for prilocaine. The sensitivities by SSI for tetracaine, benzoxinate, dibucaine, bupivacaine and mepivacaine were 4–16 times higher than those by APCI; those by SSI for procaine and lidocaine were equivalent to those by APCI. Only for prilocaine was the sensitivity by SSI two times lower than that by APCI. In view of the higher sensitivities obtained for many local anesthetics by SSI, we established a detailed procedure for the assay of these drugs in human plasma and urine by LC-MS with SSI in combination with a diol-bonded silica gel HPLC column that enabled direct injection of crude biological samples without complicated pretreatment. The recoveries, sensitivities, accuracies and precisions were found satisfactory to quantitate them at their therapeutic levels.

A novel interface for variable flow nanoscale LC/MS/MS for improved proteome coverage

A variable flow “peak trapping” liquid chromatography (LC) interface has been developed for the coupling of nanoscale LC to electrospray ionization mass spectrometry (ESI-MS). The presented peak trapping LC interface allows for the extended analysis time of co-eluting compounds and has been employed for the identification of proteins via tandem mass spectrometry (MS/MS). The variable flow process can be controlled either manually or in a completely automated manner where the mass spectrometer status determines the status of the variable flow interface. When the mass spectrometer operates in MS survey mode, the interface is operated in a so-called “high-flow” mode. Alternatively, the interface is operated in a “low-flow” mode during MS/MS analysis. In the “high-flow” mode of the variable flow process the column flow rate is typically around 200 nL/min, whereas in the “low-flow” mode the column effluent is introduced into the source of the mass spectrometer at 25 nL/min. In addition to the flow reduction during MS/MS analysis, the gradient is paused to preserve the peptide separation on the analytical nanoscale LC column. The performance of the variable flow nanoscale LC/MS/MS interface is demonstrated by the automated analysis of standard peptide mixtures and protein digests utilizing variable flow, data-dependent scanning MS/MS techniques, and automated database searching.

GPC separation of polymer samples for MALDI analysis

Matrix-assisted laser desorption/ionization (MALDI) mass spectrometry is an important technique to characterize the average molecular weights, oligomer repeat units, and end groups of polymer materials. Although MALDI methods have been developed for a broad variety of different synthetic polymers, MALDI continues to struggle with polymer samples having broad polydispersity (PD). We have combined MALDI and gel permeation chromatography (GPC) analyses for broad PD polymer samples with the use of a liquid chromatography (LC) interface. The LC interface uses heated sheath gas and a capillary nozzle to remove most of the mobile phase and deposit the GPC eluants on the precoated matrix on a moving MALDI plate. Our experiments demonstrate that the combination of GPC-LC interface-MALDI can aid in the characterization of broad PD samples, the verification of the presence of low-intensity, high-mass oligomers, and the detection of minor series in polymer samples.

Determination of Sulfadimethoxine and Sulfamethazine Residues in Animal Tissues by Liquid Chromatography and Thermospray Mass Spectrometry

A simple, sensitive, and rapid method for simultaneous determination of sulfamethazine and sulfadimethoxine residues in animal tissues by liquid chromatography (LC) with on-line confirmation by thermospray mass spectrometry is reported. Tissue extracts, after cleanup on C18 cartridges, were injected into a reversed-phase C18 column, and the sulfa drugs were determined by ultraviolet (UV) detection at 265 nm. On-line confirmation of sulfamethazine and sulfadimethoxine in the extracts by mass spectrometry was obtained by feeding the sulfa drugs eluting from the chromatographic column after UV detection directly into the ion source of a mass spectrometer with a thermospray ionization LC interface. Analytical results obtained with the LC method, which has detection limits of 2 and 10 ng/g of tissue, for sulfamethazine and sulfadimethoxine, respectively, compared favorably with those obtained with the official thin-layer chromatographic-densitometric method.

Studies on the metabolism of omeprazole in the rat using liquid chromatography/ionspray mass spectrometry and the isotope cluster technique with [34S]omeprazole.

This paper describes the application of the ionspray (pneumatically-assisted electrospray) interface for liquid chromatography (LC) and atmospheric-pressure ionization mass spectrometry (API MS) to samples obtained in a study on the metabolism of omeprazole. In this study [34S]omeprazole was utilized for the stable isotope cluster technique. Over forty metabolites in a sample of partially purified rat urine were resolved by gradient elution LC with ionspray API MS detection, and each of them produced molecular ion 1:1 clusters (MH+ and [MH + 2]+). The chromatographic fidelity of the total-ion current (TIC) was excellent. The endogenous matrix of the sample was quite low, allowing a background-subtracted averaged mass spectrum of the entire TIC trace to produce a 'metabolite mass profile' depicting all the molecular ion 1:1 clusters in the sample. From this mass profile, it was possible to obtain direct information concerning oxygenation and conjugation reactions of the parent compound.

Methomyl in the Blood of a Pilot Who Crashed during Aerial Spraying

An aerial-spray pilot died when his aircraft crashed while he was spraying methomyl. We measured the pesticide in his blood by gas chromatography with flame photometric detection and confirmed the results by mass spectrometry with direct liquid injection through a liquid chromatography interface. The whole blood methomyl concentration was 570 ng/mL.