Interfacial Charge Research Articles

Enhanced interface charge transfer through heterostructure coupling of NiO/NiCo2O4 and carbon layer for photocatalysis

Constructing heterogeneous composite materials is a promising strategy for enhancing photocatalytic performance. In this study, the calcination method was employed to coat a carbon layer onto the surface of quartz sand. Additionally, NiO/NiCo2O4 heterostructures were loaded onto the carbon layer to facilitate charge transfer and enhance photo-generated electron yield. The carefully designed QSC@NiO/NiCo2O4 heterojunction possesses an efficient interface charge transfer channel, thereby improving contaminant degradation capacity. The results demonstrated that under 120 min of light exposure, the removal efficiencies for RhB and MB reached 94.75 % and 93.55 %, respectively. After undergoing 5 cycles, both RhB and MB exhibited consistently high elimination rates with values of 83.74 % and 77.42 %, respectively. Furthermore, tapping experiments were conducted to explore the mechanism of photocatalytic degradation.

Modulation of pulsed electric field induced oxidative processes in protein solutions by pro- and antioxidants sensed by biochemiluminescence.

Technologies based on pulsed electric field (PEF) are increasingly pervasive in medical and industrial applications. However, the detailed understanding of how PEF acts on biosamples including proteins at the molecular level is missing. There are indications that PEF might act on biomolecules via electrogenerated reactive oxygen species (ROS). However, it is unclear how this action is modulated by the pro- and antioxidants, which are naturally present components of biosamples. This knowledge gap is often due to insufficient sensitivity of the conventionally utilized detection assays. To overcome this limitation, here we employed an endogenous (bio)chemiluminescence sensing platform, which enables sensitive detection of PEF-generated ROS and oxidative processes in proteins, to inspect effects of pro-and antioxidants. Taking bovine serum albumin (BSA) as a model protein, we found that the chemiluminescence signal arising from its solution is greatly enhanced in the presence of as a prooxidant, especially during PEF treatment. In contrast, the chemiluminescence signal decreases in the presence of antioxidant enzymes (catalase, superoxide dismutase), indicating the involvement of both and electrogenerated superoxide anion in oxidation-reporting chemiluminescence signal before, during, and after PEF treatment. We also performed additional biochemical and biophysical assays, which confirmed that BSA underwent structural changes after treatment, with PEF having only a minor effect. We proposed a scheme describing the reactions leading from interfacial charge transfer at the anode by which ROS are generated to the actual photon emission. Results of our work help to elucidate the mechanisms of action of PEF on proteins via electrogenerated reactive oxygen species and open up new avenues for the application of PEF technology. The developed chemiluminescence technique enables label-free, in-situ and non-destructive sensing of interactions between ROS and proteins. The technique may be applied to study oxidative damage of other classes of biomolecules such as lipids, nucleic acids or carbohydrates.

Reinforced interfacial coupling effect of NiO/Ni2P by Fe doping for boosting water splitting

Nickel-based catalysts are suitable for water splitting to generate hydrogen. However, the low conductivity and weak stability have always been urgent issues to be addressed in nickel-based catalysts. Fe-doped nickel oxide/nickel phosphide (Fe-NiO/Ni2P) was prepared as a bifunctional electrocatalyst by doping metal and constructing heterogeneous interface. The introduction of Fe contributed to the reinforced interfacial coupling effect of NiO/Ni2P to promote charge transfer and accelerate reaction kinetics. The heterojunction regulated the interfacial charge density between NiO and Ni2P to improve the electronic environment of Ni2+ and enhance conductivity. The O-Fe-P bond at the heterogeneous interface induced the directional transfer of electrons and ensured the structure stability. The synergistic effect of Fe doping and heterogeneous interface increased the adsorption energy of *O and coordinated the adsorption energy of *H, advancing the catalytic performance. Fe-NiO/Ni2P exhibited the overpotential of 242 mV and 141 mV at 10 mA cm−2 for oxygen and hydrogen evolution, respectively.

Controllable magnetic anisotropy in two-dimensional 1T-CrTe2 with electrides sublayer

Exploring the controlled magnetic anisotropy energy (MAE) in two-dimensional (2D) ferromagnets is an essential step towards the emergent magnetic tunnel junctions (MTJs) with robust storage stability and low-power consumption. In addition to the transitional charge doping method, we propose that stacking 2D ferromagnet 1T-CrTe2 with electrides substrate can achieve not only the high interfacial charge transfer up to 5.24×1014 cm−2 and but also efficient modification of magnetic behaviors via interfacial engineering. Employing first-principles calculations, we show that the 1T-CrTe2/Ca2N(Y2C) heterostructures exhibit a significant reduction in MAE with a spin reorientation. Notably, the synergistic effect of internal charge transfer, external strain and charge doping shows a significant influence on the magnetic behaviors of the bilayer structures, enabling an efficient modulating of their MAE with distinct dependences. We elucidate that the underlying mechanism is the synergistic effect induced alteration of the spin-polarized px and py states on the Te atom located at the interfaces, which in turn changes the competitive spin-orbit coupling (SOC) contributions to the MAE. These findings provide a practical path toward the controllable MAE in 2D ferromagnets, and make the proposed heterostructures promising candidates for emergent spintronic devices.

Electrocatalysis, diverse and forever young

Electrocatalysis has always been evolving and diversifying. Driven by expectations of advanced practical applications, the field is incorporating increasingly complex catalytic materials and leveraging insights from advanced spectroscopic, microscopic, and diffraction techniques. A significant challenge lies in linking these innovations to the fundamentals of electrocatalysis, such as the role of the charged interface, and the effects of particle size, support, spillover of adsorbates, identification of reaction intermediates, and further specification of the overall catalytic reaction pathways. This review briefly outlines the development of the electrocatalysis field and presents representative examples addressing this challenge. In line with the purpose of this review, the selection of cited articles is curated to highlight the numerous contributions of a scientist and friend whose research exemplifies the evolution of the field over the past decades.

The synthesis of Bi2MoO6 with metallic and nonmetallic vacancies for degradation of LVF in visible light

Defect engineering advantages include regulating the band structure of photocatalytic materials, inhibiting the recombination of photoelectron-hole pairs, and promoting the conversion of photogenerated electrons into active radicals. In this paper, bismuth molybdate (Bi2MoO6) photocatalysts with double vacancies (VBi-O-BMO) were prepared by solvothermal and ionic eutectic solvent methods. EPR, TEM, and XPS results confirmed the successful construction of oxygen and bismuth vacancies on Bi2MoO6. The photocatalytic performance of the prepared catalysts was investigated by photodegradation of levofloxacin hydrochloride (LVF) under visible light. The double vacancies markedly enhanced the photocatalytic properties of Bi2MoO6, with the photodegradation rate of VBi-O-BMO reaching 88.36 % for 40 mg/L LVF within 60 min. Kinetic studies have demonstrated that the reaction rate constant of VBi-O-BMO can reach 0.0351 min−1, which is 3.2 times higher than that of bulk-BMO. This can be attributed to the favorable synergistic effect of oxygen and bismuth double vacancies. VO not only captures oxygen and electrons, facilitating the generation of superoxide radicals (O2−), but also elevates the conduction band position and boosts the reduction capability of Bi2MoO6. VBi not only captures photogenerated holes (h+) to directly impact LVF degradation, but also promotes interfacial charge transfer and inhibits the recombination of electron-hole pairs. Furthermore, the intermediates and degradation pathways of LVF photodegradation were surmised based on the LC-MS analysis. The reaction mechanism of LVF photodegradation by VBi-O-BMO was elucidated through the application of the free radical pathway. This study demonstrates a methodology for the creation of double vacancies in catalysts and the significant potential of VBi-O-BMO for the remediation of antibiotic residues in water under visible light.

An atomically controlled insulator-to-metal transition in iridate/manganite heterostructures.

All-insulator heterostructures with an emerging metallicity are at the forefront of material science, which typically contain at least one band insulator while it is not necessary to be. Here we show emergent phenomena in a series of all-correlated-insulator heterostructures that composed of insulating CaIrO3 and insulating La0.67Sr0.33MnO3. We observed an intriguing insulator-to-metal transition, that depends delicately on the thickness of the iridate component. The simultaneous enhancements of magnetization, electric conductivity, and magnetoresistance effect indicate a percolation-type nature of the insulator-to-metal transition, with the percolation threshold can be reached at an exceptionally low volume fraction of the iridate. Such a drastic transition is induced by an interfacial charge transfer, which interestingly alters the electronic and crystalline structures of the bulk region rather than the limited ultrathin interface. We further showcased the central role of effective correlation in modulating the insulator-to-metal transition, by demonstrating that the critical thickness of iridate for triggering the metallic state can be systematically reduced down to a single unit-cell layer.

Development and Optimization of Thin-Lithium-Metal Anodes with a Lithium Lanthanum Titanate Stabilization Coating for Enhancement of Lithium-Sulfur Battery Performance.

Lithium-ion batteries are dominating high-energy-density energy storage for 30 years. However, their development approaches theoretical limits, spurring the development of lithium-sulfur cells that achieve high energy densities through reversible electrochemical conversion reactions. Nevertheless, the commercialization of lithium-sulfur cells is hindered by practical challenges associated primarily with the use of thick-lithium anodes, low-loading sulfur cathodes, and high electrolyte-to-sulfur ratios, which prevent realization of the cells' full potential in terms of electrochemical and material performance. To solve these extrinsic and intrinsic problems, the effect of lithium-metal thickness on the electrochemical behavior of lithium-sulfur cells with high-loading sulfur cathodes in lean-electrolyte configurations is investigated. Specifically, lithium lanthanum titanate (LLTO), a solid electrolyte, is utilized to form an ionically/electronically conductive coating to stabilize lithium-metal anodes, thereby enhancing their lithium-ion pathways and interfacial charge transfer. Electrochemical analyses reveal that an LLTO coating significantly reduces excessive reactions between lithium metal and an electrolyte, thereby minimizing lithium consumption and electrolyte depletion. Further, LLTO-stabilized lithium anodes improve lithium-sulfur cell performance, and most importantly, allow the fabrication of thin-lithium, high-loading-sulfur cells that open a pathway toward high-energy-density batteries.

A(CoFe)(S2)2/CoFe heterostructure constructed in S, N co-doped carbon nanotubes as an efficient oxygen electrocatalyst for zinc-air battery

Transition metal alloys can exhibit synergistic intermetallic effects to obtain high activities for oxygen reduction/evolution reactions (ORR/OER). However, due to the insufficient stability of active sites in alkaline electrolytes, conventional alloy catalysts still do not meet practical needs. Herein, by using polypyrrole tubes and cobalt-iron (CoFe) Prussian blue analogs as precursors, CoFe sulfides is in-situ formed on CoFe alloys to construct (CoFe)(S2)2/CoFe heterostructure in sulfur (S) and nitrogen (N) co-doped carbon nanotubes (CoFe@NCNTs-nS) via a low-temperature sulfidation strategy. The as-marked CoFe@NCNTs-12.5S exhibits a comparable ORR activity (half-wave potential of 0.901 V) to Pt/C (0.903 V) and a superior OER activity (overpotential of 272 mV at 10 mA cm−2) to RuO2 (299 mV). CoFe@NCNTs-12.5S also exhibits ultralow charge transfer resistances (ORR-6.36 Ω and OER-0.21 Ω) and an excellent potential difference of 0.617 V. The sulfidation-induced (CoFe)(S2)2/CoFe heterojunctions can accelerate interfacial charge transfer process. Tubular structure not only disperses the (CoFe)(S2)2/CoFe heterostructure, but also reduces the corrosion of active-sites to enhance catalysis stability. Zinc-air battery with CoFe@NCNTs-12.5S achieves a high specific capacity (718.1 mAh g−1), maintaining a voltage gap of 0.957 V after 400 h. This work reveals the potential of interface engineering for boosting ORR/OER activities of alloys via in-situ heterogenization.

Research on interface charge behaviour and electrical threshold in layered epoxy/paper composites: From experiment to simulation

Research on interface charge behaviour and electrical threshold in layered epoxy/paper composites: From experiment to simulation

Ternary TiO2/MoS2/ZnO hetero-nanostructure based multifunctional sensing devices

Novel sensing applications benefit from multifunctional nanomaterials responsive to various external stimuli such as mechanics, electricity, light, humidity, or pollution. While few such materials occur naturally, the careful design of synergized nanomaterials unifies the cross-coupled properties which are weak or absent in single-phase materials. In this study, 2D MoS2 integrated with ultrathin dielectric oxide layers forms hetero-nanostructures with significant impacts on carrier transport. The ternary TiO2/MoS2/ZnO hetero-nanostructures, along with their individual properties, improve the performance of multifunctional sensing devices. The synthesized hetero-nanostructure exhibits a responsivity of up to 16 mA/W to 700 nm light and responds to 5 ppm ammonia gas at room temperature. These enhancements are attributed to interface charge transfer and photogating effects. The ternary TiO2/MoS2/ZnO hetero-nanostructure is compatible with existing semiconductor fabrication technologies, making it feasible to integrate into flexible, lightweight semiconductor devices and circuits. These results may inspire new photodetectors and sensing devices based on two-dimensional (2D) layered materials for IoT applications.

Extended Interfacial Charge Transference in CoFe2O4/WO3 Nanocomposites for the Photocatalytic Degradation of Tetracycline Antibiotics.

The large-scale utilization of antibiotics has opened a separate chapter of pollution with the generation of reactive drug-resistant bacteria. To deal with this, in this work, different mass ratios of CoFe2O4/WO3 nanocomposites were prepared following an in situ growth method using the precursors of WO3 and CoFe2O4. The structure, morphology, and optical properties of the nanocomposite photocatalysts were scrutinized by X-ray diffraction (XRD), UV-visible diffuse reflectance spectra (UV-Vis DRS), photoluminescence spectrum (PL), etc. The experimental data signified that the loading of CoFe2O4 obviously changed the optical properties of WO3. The photocatalytic performance of CoFe2O4/WO3 composites was investigated by considering tetracycline as a potential pollutant. The outcome of the analyzed data exposed that the CoFe2O4/WO3 composite with a mass ratio of 5% had the best degradation performance for tetracycline eradication under the solar light, and a degradation efficiency of 77% was achieved in 20 min. The monitored degradation efficiency of the optimized photocatalyst was 45% higher compared with the degradation efficiency of 32% for pure WO3. Capturing experiments and tests revealed that hydroxyl radical (·OH) and hole (h+) were the primary eradicators of the target pollutant. This study demonstrates that a proper mass of CoFe2O4 can significantly push WO3 for enhanced eradication of waterborne pollutants.

Synergistic enhancement of the photocatalytic activity of g-C3N4 via in-situ surface alkalization and CQDs loading strategies

The CQDs/alkaline carbon nitride heterojunction photocatalysts were synthesized employing dicyandiamide as the nitrogen material, Citric acid was used as the carbon source, while KCl and NH4Cl were as alkaline reagents. The study investigated the influence of CQDs on the adsorption performance, photocatalytic activity, and band structure of alkalized carbon nitride. The dark adsorption results revealed that CNK/CQDs1: 12 exhibited outstanding adsorption performance, capable of degrading adsorbed pollutants in a relatively short period. The photocatalytic degradation study demonstrates that CNK/CQDs1:12 exhibits significantly higher degradation efficiencies compared to the pristine CN and alkalinized CNK samples, with degradation efficiencies of 94.4 % for Methylene Blue (MB) and 71.68 % for tetracycline hydrochloride (TC-HCl) within 60 min. This is due to the synergistic effects of alkalization of the g-C3N4 surface and CQDs loading, which modified the heterojunction interfacial charge transfer efficiency, suppressing the recombination of photoelectron-hole pair, extending the life span of transient photogenerated carriers, thereby improving photocatalytic activity. Free radical trapping experiment indicated that h+ and ·O2− are the primary active species during the photocatalytic degradation process of CNK/CQDs1:12.

Enhanced photocatalytic oxidation of gaseous acetaldehyde using Fe-grafted ZnO nanocomposites in a continuous flow reactor

The purification of indoor air is a crucial application of photocatalysis, emphasizing the urgent need for more efficient photocatalytic systems. While photocatalytic oxidation of volatile organic compounds (VOCs) has been extensively studied in the liquid phase, effective removal of VOCs in the gaseous state in indoor air remains a significant challenge. This study focuses on the continuous gas-phase oxidation of gaseous acetaldehyde using ZnO and different weight percentage of Fe-grafted ZnO catalysts under light irradiation. The surface analysis using XPS and HR-TEM confirmed the presence of Fe(III) species, and UV–Vis-DRS analysis demonstrated a shift in the absorption edge towards the visible region. Real-time gas FTIR monitoring of acetaldehyde oxidation revealed that the 0.7% Fe(III)-grafted ZnO composite catalyst achieved a higher removal efficiency (74%) compared to bare ZnO and other Fe(III)-grafted ZnO ratios. The enhanced photocatalytic efficiency of acetaldehyde by Fe(III)-grafted ZnO supports indicated direct interfacial charge transfer (IFCT) from ZnO to Fe(III) species. Additionally, the Fe(III) cluster effectively improved the separation of electrons and holes, preventing their recombination and accelerating O₂ activation to generate O₂•⁻ radicals, which lead to high photocatalytic performance. The 0.7% Fe(III)-grafted ZnO also maintained its performance over a prolonged period of 360 min, showing excellent structural stability and durability across multiple cycles. This study highlights the possible synergistic effect of the ZnO and Fe systems, offering a new perspective on the photocatalytic decomposition of gaseous acetaldehyde in indoor environments.

Constructing hollow cobalt sulfide nanocages strung by manganese molybdate nanorods for high-efficiency supercapacitors and electrocatalytic methanol oxidation

Constructing core-shell heterostuctures with rationally designed nanoarchitectures and components is a promising strategy to pursuit high-efficiency energy storage and conversion in supercapacitors (SCs) and direct methanol fuel cells (DMFCs). Herein, a multi-dimensional MnMoO4@CoS core-shell heterostructure is designed and synthesized by stringing metal-organic framework-derived hollow CoS nanocages with MnMoO4 nanorods. Such heterostructure provides more electroactive sites and enhanced structural stability. Theory calculations unveil that the work function difference between MnMoO4 and CoS induces the charge redistribution and modulate interfacial electronic configuration in the MnMoO4/CoS heterojunction. Meanwhile, a interfacial built-in electrical field is established, enhancing interfacial charge transfer efficiency and promoting the surface adsorption of electrolyte ions. By integrating all these advantages, the MnMoO4@CoS electrode demonstrates enhanced rate capacities (933 C g−1 at 1 A g−1 and 623 C g−1 at 10 A g−1) and cycling durability (90.3 % capacity retention after 10,000 cycles) compared to bare MnMoO4 and CoS electrodes. Moreover, the MnMoO4@CoS electrode exhibits an appreciable electrocatalytic performance for methanol oxidation, with a current density of 294.8 mA cm−2 at 10 mV s−1 and 96.6 % current retention after 10,000 s. Our work offers a fundamental guideline for designing and engineering core-shell heterostructures with desirable electrochemical performance for SCs and DMFCs.

Micron silicon-oxide-carbon coated with TiOx(OH)y layer as better performance anode for lithium-ion batteries

Micron-silicon based material is a promising anode material for high performance lithium batteries due to its ultra-high specific capacity. However, the volume expansion exceeds 300 % during charging and discharging, resulting in the collapse of the electrode structure and a rapid decline in electrochemical performance. Coating the surface of silicon-based materials with flexible ionic conductors is an effective method to maintain their high capacity and suppress swelling. Here, to further improve the electrochemical performance of silicon-based materials, we have deposited a titanate-type ionic conductor layer on a micron-sized silicon-carbon oxide (SiOX-C) material to synthesize the SiOX-C@TiOx(OH)y material. The TiOx(OH)y layer not only exhibits the elastic properties of a superpolymer to mitigate swelling strain, but also has a fast capacitance effect to improve its rate performance. In addition, the interfacial charge transport of SiOX-C@TiOx(OH)y is enhanced due to the structural diversity of the TiOx(OH)y layer. For the above mechanisms, the SiOX-C@TiOx(OH)y has a specific capacity of 278.3 mAh g−1 under high current of 3500 mA g−1. Meanwhile, the SiOX-C@TiOx(OH)y with the capacity retention of 67 % is achieved at 2000 mA g−1 after 100 cycles.

Engineering of MnTe/MnO Heterostructures with Interfacial Electric Field Modulation for Efficient and Durable Li–O2 Batteries

AbstractDesign and synthesis of highly active and robust bifunctional cathode catalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are of vital significance for practical applications of lithium–oxygen (Li–O2) batteries. Herein, a built‐in electric field (BIEF) strategy is reported to fabricate MnTe/MnO heterostructures with a large work function difference (ΔΦ) as a bifunctional cathode catalyst in Li–O2 batteries. The MnTe/MnO heterostructures with nanosheets and microporous structures result in an abundance of exposed active sites and facilitate mass transfer. More importantly, the heterogeneous MnTe/MnO nano‐interface region provides a BIEF that can trigger interfacial charge redistribution, fine‐tune the adsorption energy of oxygen intermediates, and alter the morphology of discharge products to accelerate ORR/OER kinetics. Impressively, the fabricated Li–O2 batteries with MnTe/MnO cathode showcases exhibit excellent electrochemical performances, including low charging overpotential, a high specific capacity of 11930 mA h g−1, and good cycle stability over 350 cycles even with a fixed specific capacity of 500 mA h g−1 at a current density of 500 mA g−1. This work provides an avenue for the rational design of high performance heterostructure electrocatalysts toward practical applications for rechargeable Li–O2 batteries.

Synergistic Schottky contacts & diatomic doping in Cr/P-MoS2@Ti3C2Tx with boosted energy storage performance

Molybdenum disulfide (MoS2), despite its promising attributes, suffers from low conductivity and aggregation. Herein, we introduce a novel approach that integrates Schottky contacts with Cr/P diatomic doping in MoS2@Ti3C2Tx, significantly enhancing its performance. The Schottky contacts effectively suppress aggregation and accelerate interfacial charge transfer, while Cr/P doping boosts conductivity, active sites, and stability. As a result, the Cr/P-MoS2@Ti3C2Tx electrode exhibits a specific capacitance of 650 F g-1 at 1 A g-1, which is fourfold higher than that of pristine MoS2. When assembled into an asymmetric supercapacitor (Cr/P-MoS2@Ti3C2Tx//AC ASC), the device achieves a peak energy density of 32 Wh kg-1 at 303 W kg-1, maintaining 85% capacitance retention after 10,000 cycles with an impressive coulombic efficiency of 97%. Furthermore, the density functional theory (DFT) calculations validate the beneficial effects of Schottky contacts and diatomic doping on the improved energy storage performance of Cr/P-MoS2@Ti3C2Tx. This work demonstrates the promising potential of the material for applications in high-performance supercapacitors (SCs).

Dirac Electrons with Molecular Relaxation Time at Electrochemical Interface between Graphene and Water.

The time dynamics of charge accumulation at the electrochemical interface between graphene and water is important for supercapacitors, batteries, and chemical and biological sensors. By using impedance spectroscopy, we have found that measured capacitance (Cm) at this interface with the gate voltage Vgate ≈ 0.1 V follows approximate laws Cm~T1.2 and Cm~T0.11 (T is Vgate period) in frequency ranges (1000-50,000) Hz and (0.02-300) Hz, respectively. In the first range, this dependence demonstrates that the interfacial capacitance (Cint) is only partially charged during the charging period. The observed weaker frequency dependence of the measured capacitance (Cm) at frequencies below 300 Hz is primarily determined by the molecular relaxation of the double-layer capacitance (Cdl) and by the graphene quantum capacitance (Cq), and it also implies that Cint is mostly charged. We have also found a voltage dependence of Cm below 10 Hz, which is likely related to the voltage dependence of Cq. The observation of this effect only at low frequencies indicates that Cq relaxation time is much longer than is typical for electron processes, probably due to Dirac cone reconstruction from graphene electrons with increased effective mass as a result of their quasichemical bonding with interfacial molecular charges.

Osmolyte-Induced Modulation of Hofmeister Series.

Natural selection has driven the convergence toward a selected set of osmolytes, endowing them with the necessary efficiency to manage stress arising from salt diversity. This study combines atomistic simulations and experiments to investigate how two osmolytes, glycine and betaine, individually modulate the Hofmeister ion ordering of alkali metal salts (LiCl, KCl, and CsCl) near a charged silica interface. Both osmolytes are found to prevent salt-induced aggregation of the charged entities, yet their mode and degree of relative modulation depend on their intricate interplay with specific salt cations. Betaine's ion-mediated surface interaction maintains Hofmeister ion ordering, whereas glycine alters the relative Hofmeister order of the cation by salt-specific ion desorption from the surface. Experimental validation through surface-enhanced Raman spectroscopy supports these findings, elucidating osmolyte-mediated alterations in interfacial water structures. These observations based on an inorganic interface are reciprocated in amyloid beta 40 dimerization dynamics, highlighting osmolytes' efficacy in mitigating salt-induced aggregation. A molecular analysis suggests that the differential modes of interaction, as found here for glycine and betaine, are prevalent across classes of zwitterionic osmolytes.