Interchromophore Interactions Research Articles

Solution-Processed Dendrimer-Based TADF Materials for Deep-Red OLEDs

We report the first example of a thermally activated delayed fluorescence (TADF) poly(dendrimer), composed of a norbornenyl-derived polymer backbone and dendritic side-chain chromophores comprising 2,3-dicyanopyrazino as the electron acceptor and a first-generation fluorenylcarbazole derivative as the electron donor. The TADF poly(dendrimer) homopolymer, with one dendritic side chain attached to each monomer unit, emitted deep-red light. The emission of the poly(dendrimer) was found to be red-shifted relative to the nonpolymeric doubly dendronized emitter composed of the same components. The simple dendrimer was found to have a solution photoluminescence quantum yield (PLQY) of around 70%. In contrast, the poly(dendrimer) had a PLQY of 9%, which was attributed to intramolecular interchromophore interactions. An interesting feature of the poly(dendrimer) was that oxygen did not quench the TADF emission. We found that the PLQY of the simple dendrimer decreased markedly in neat films, whereas that of the poly(dendrimer) did not, with both having a solid-state PLQY of around 10%. The results suggest that intrapolymer chromophore-chromophore interactions observed in solution for the poly(dendrimer) were similar to the intermolecular chromophore-chromophore interactions of the dendrimer in the solid state. Simple two-layer organic light-emitting diodes comprising nondoped films of the materials and an electron transport layer showed red emission with CIE coordinates of (x > 0.66, y < 0.34). The dendrimer-based device had a maximum external quantum efficiency of 2.4%, which is among the best for solution-processed deep-red emissive TADF-based OLEDs but in a simpler device architecture.

Bridge Resonance Effects in Singlet Fission.

A major benefit of intramolecular singlet fission (iSF) materials, in which through-bond interactions mediate triplet pair formation, is the ability to control the triplet formation dynamics through molecular engineering. One common design strategy is the use of molecular bridges to mediate interchromophore interactions, decreasing electronic coupling by increasing chromophore-chromophore separation. Here, we report how the judicious choice of aromatic bridges can enhance chromophore-chromophore electronic coupling. This molecular engineering strategy takes advantage of "bridge resonance", in which the frontier orbital energies are nearly degenerate with those of the covalently linked singlet fission chromophores, resulting in fast iSF even at large interchromophore separations. Using transient absorption spectroscopy, we investigate this bridge resonance effect in a series of pentacene and tetracene-bridged dimers, and we find that the rate of triplet formation is enhanced as the bridge orbitals approach resonance. This work highlights the important role of molecular connectivity in controlling the rate of iSF through chemical bonds and establishes critical design principles for future use of iSF materials in optoelectronic devices.

Analysis of Solid-State Luminescence Emission Amplification at Substituted Anthracenes by Host-Guest Complex Formation.

Small robust organic molecules showing solid‐state luminescence are promising candidates for optoelectronic materials. Herein, we investigate a series of diphenylphosphanyl anthracenes [9‐PPh2‐10‐R‐(C14H8)] and their sulfur oxidised analogues. The oxidation causes drastic changes in the molecular structure as the new orientation of the bulky (S)PPh2 substituent induces a strong butterfly bent structure of the anthracene core, which triggers a strong bathochromic shift resulting in a green solid‐state fluorescence. As the emission properties change only slightly upon aggregation the origin of the emission is attributed to a typical monomer fluorescence. The host–guest complexes of [9‐(S)PPh2‐10‐Ethyl‐(C14H8)] with four basic arenes reveal an emission enhancement up to five‐times higher quantum yields compared to the pure host. Less interchromophoric interactions and a restriction of intramolecular motion within the host molecules due to fixation by weak C−H⋅⋅⋅π interactions with the co‐crystallised arene are responsible for that emission enhancement.

Vibrational Circular Dichroism Detects Symmetry Breaking due to Conformational Mobility in C2-Symmetry Chiral Molecules and Provides Further Insight into Inter-Chromophoric Interactions

Bicyclo[3.3.1]nonane-2,6-dione (1) and bicyclo[3.3.1]nona-3,7-diene-2,6-dione (2) have been examined by vibrational circular dichroism (VCD), which, as for most C2-symmetric systems, exhibits strong VCD signals. In the case of 2, VCD signals are stronger and sharper with several bisignate doublets; for 1, signals are less intense and broader. The VCD and IR spectra are excellently predicted by DFT calculations: only one conformer is present for 2, while for 1, three main conformers, related through concerted skeleton torsional motions are present (two of them being interchanged by C2-rotation). The VCD spectrum shows specific features for the different conformers, such that correct population factors are crucial for reproducing experimental data. Also, the TD-DFT prediction of ECD (electronic circular dichroism) spectra is good. By comparing the spectroscopic signature of the two molecules (both VCD and ECD) and by careful analysis of the theoretical results, the role of the C=C double bond in compound (2) is evidenced. The double bond contributes toward enhancing the CD response both electronically and vibrationally.

Crystalline assembly of perylene in metal–organic framework thin film: J-aggregate or excimer? Insight into the electronic structure

The spatial orientation of chromophores defines the photophysical and optoelectronic properties of a material and serves as the main tunable parameter for tailoring functionality. Controlled assembly for achieving a predefined spatial orientation of chromophores is rather challenging. Metal–organic frameworks (MOFs) are an attractive platform for exploring the virtually unlimited chemical space of organic components and their self-assembly for device optimization. Here, we demonstrate the impact of interchromophore interactions on the photophysical properties of a surface-anchored MOF (SURMOF) based on 3,9-perylenedicarboxylicacid linkers. We predict the structural assembly of the perylene molecules in the MOF via robust periodic density functional theory calculations and discuss the impact of unit topology and π–π interaction patterns on spectroscopic and semiconducting properties of the MOF films. We explain the dual nature of excited states in the perylene MOF, where strong temperature-modulated excimer emission, enhanced by the formation of perylene J-aggregates, and low stable monomer emission are observed. We use band-like and hopping transport mechanisms to predict semiconducting properties of perylene SURMOF-2 films as a function of inter-linker interactions, demonstrating both p-type and n-type conduction mechanisms. Hole carrier mobility up to 7.34 cm2 Vs−1 is predicted for the perylene SURMOF-2. The results show a promising pathway towards controlling excimer photophysics in a MOF while controlling charge carrier mobility on the basis of a predictive model.

Exciton Isolation in Cross-Pentacene Architecture.

Null aggregates are an elusive, emergent class of molecular assembly categorized as spectroscopically uncoupled molecules. Orthogonally stacked chromophoric arrays are considered as a highlighted architecture for null aggregates. Herein, we unveil the null exciton character in a series of crystalline Greek cross (+)-assembly of 6,13-bisaryl-substituted pentacene derivatives. Quantum chemical computations suggest that the synergistic perpendicular orientation and significant interchromophoric separations realize negligible long-range Coulombic and short-range charge-transfer-mediated couplings in the null aggregate. The Greek cross (+)-orientation of pentacene dimers exhibits a selectively higher electron-transfer coupling with near-zero hole-transfer coupling and thereby contributes to the lowering of charge-transfer-mediated coupling even at shorter interchromophoric distances. Additional investigations on the nature of excitonic states of pentacene dimers proved that any deviation from a 90° cross-stacked orientation results in the emergence of delocalized Frenkel/mixed-Frenkel-CT character and the consequent loss of null exciton/monomer-like properties. The retention of exciton isolation even at a short-range coupling regime reassures the universality of null excitonic character in perpendicularly cross-stacked pentacene systems. The null-excitonic character was experimentally verified by the observation of similar spectral characteristics in the crystalline and monomeric solution state for 6,13-bisaryl-substituted pentacene derivatives. The partitioned influence of aryl and pentacene fragments on interchromophoric noncovalent interactions and photophysical properties, respectively, resulted in the emergence of pentacene centric Kasha's ideal null exciton, providing novel insights toward design strategies for cross-stacked chromophoric assemblies. Identifying the Greek cross (+)-stacked architecture-mediated null excitons with a charge-filtering phenomenon for the first time in the ever-versatile pentacene chromophoric systems can offer an extensive ground for the engineering of functional materials with advanced optoelectronic properties.

Improving Energy Transfer within Metal-Organic Frameworks by Aligning Linker Transition Dipoles along the Framework Axis.

Crystalline metal-organic frameworks (MOFs) can assemble chromophoric molecules into a wide range of spatial arrangements, which are controlled by the MOF topology. Like natural light-harvesting complexes (LHCs), the precise arrangement modulates interchromophoric interactions, in turn determining excitonic behavior and migration dynamics. To unveil the key factors that control efficient exciton displacements within MOFs, we first developed linkers with low electronic symmetry (as defined by large transition dipoles) and then assembled them into MOFs. These linkers possess extended conjugation along one molecular axis, engendering low optical bandgaps and improved oscillator strength for their lowest-energy transition (S0 → S1). This enhances absorption-emission spectral overlap and boosts the efficiency of Förster resonance energy transfer, which was observed experimentally by a sizable decrease in emission quantum yield (QY), accompanied by a faster population decay profile. We find that MOFs that orient these elongated linkers along their asymmetric pore channel, e.g., the hexagonal pores in an xly network, manifested >50% decrease in their emission QY with faster decay profiles relative to their corresponding solution dissolved linkers. This is due to an efficient migration of photogenerated excitons at the crystallite peripheral sites to internal sites, which was facilitated by polarized absorption-emission overlap among the parallelly aligned linkers. In contrast, symmetric MOFs, such as those with sqc-a topological net, orient elongated linkers along two perpendicular crystal axes, which hinders efficient exciton migration. The present study underscores that MOFs are promising to develop artificial LHCs, but that to achieve an efficient exciton displacement, appropriate topology-guided assembly is required to fully realize the true potential of linkers with low electronic symmetry.

Photoluminescent and Photoresponsive Iptycene‐Incorporated π‐Conjugated Systems: Fundamentals and Applications

AbstractIptycene is a class of 3D, rigid, and arene‐rich frameworks and has been incorporated into photoactive π‐systems for a variety of purposes, including tuning interchromophore interactions and thus the luminescence properties, creating active sites for excited‐state host–guest interactions, controlling the planarity of the π‐backbone for exciton delocalization activity, serving as a template for gating the charge/electron/energy‐transfer or intersystem crossing efficiency, generating structural chirality for chiroptical properties, and acting as a multiblade rotator in photoresponsive molecular devices. This Review outlines these concepts with examples reported over the past two decades.

Perylene Bisimide Cyclophanes: Structure–Property Relationships upon Variation of the Cavity Size

Five cyclophanes composed of two perylene bisimide (PBI) dyes and various CH2–arylene–CH2 linker units were synthesized. PM6-D3H4 geometry-optimized structures and a single crystal for one of these cyclophanes reveal well-defined distances between the two coplanar PBI units in these cyclophanes, spanning the range from 5.0 to 12.5 Å. UV/vis absorption spectra reveal a redistribution of oscillator strength of the vibronic bands due to a H-type exciton coupling even for the cyclophane with the largest interchromophoric distance. A quantitative evaluation according to the Kasha–Spano theory affords exciton coupling strengths ranging from 64 cm−1 for the largest cyclophane up to 333 cm−1 for the smallest one and a surprisingly good fit to the cubic interchromophoric distance in the framework of the point-dipole approximation. Interchromophoric interaction is also noticed in fluorescence lifetimes that are significantly increased for all five cyclophanes as expected for H-coupled chromophores due to a decrease of the radiative rate. For the three largest cyclophanes with interchromophoric distances of &gt;9 Å, fluorescence quantum yields remain high in chloroform (&gt;88%), whilst for the smaller ones with interchromophoric distances &lt;6 Å, additional nonradiative pathways lead to a pronounced fluorescence quenching.

Two pyrene-based metal−organic frameworks constructed from 1,3,6,8-tetrakis(p-benzoic acid)pyrene: Syntheses, structures and photoelectron performances

Two pyrene-based metal−organic frameworks directed by ionic liquids, [M2(TBAPy)(H2O)2]·(Guests)x (M ​= ​Co 1, Zn 2) based on a tetratopic linker with a π-conjugated pyrene core, i.e. 1,3,6,8-tetrakis(p-benzoic acid)pyrene (H4TBAPy), have been synthesized under the combination of hydro/solvothermal and ionothermal condition. 1 and 2 are isostructural and feature 2D layered porous network based on M2(O2C)4 paddlewheel units with axially coordinated water molecules. The temperature-dependent fluorescence emission clearly demonstrates the varying degree of interchromophoric interaction as a function of temperature within ​1 ​and ​2. Photoelectron measurements reveal that 1 and 2 both display quick response to visible light irradiation, and are capable of repetitive on-off photocurrent switching with a large on-off ratios. The closely spaced TBAPy chromophores and their higher local concentration along with their twisty molecular conformation would facilitate the formation of excimers, photon capture, electron−hole separation, long-range energy transport and delivery.

Synthesis and excited state processes of arrays containing amine-rich carbon dots and unsymmetrical rylene diimides

This work reports on the preparation of carbon dots (CDs) and rylene diimide hybrids and their spectroscopic investigation reveals complex inter-chromophoric interactions.

Advanced Photoresponsive Materials Using the Metal-Organic Framework Approach.

When fabricating macroscopic devices exploiting the properties of organic chromophores, the corresponding molecules need to be condensed into a solid material. Since optical absorption properties are often strongly affected by interchromophore interactions, solids with a well-defined structure carry substantial advantages over amorphous materials. Here, the metal-organic framework (MOF)-based approach is presented. By appropriate functionalization, most organic chromophores can be converted to function as linkers, which can coordinate to metal or metal-oxo centers so as to yield stable, crystalline frameworks. Photoexcitations in such chromophore-based MOFs are surveyed, with a special emphasis on light-switchable MOFs from photochromic molecules. The conventional powder form of MOFs obtained using solvothermal approaches carries certain disadvantages for optical applications, such as limited efficiency resulting from absorption and light scattering caused by the (micrometer-sized) powder particles. How these problems can be avoided by using MOF thin films is demonstrated.

Steric Interactions Impact Vibronic and Vibrational Coherences in Perylenediimide Cyclophanes.

Designing molecular systems that exploit vibronic coherence to improve light harvesting efficiencies relies on understanding how interchromophoric interactions, such as van der Waals forces and dipolar coupling, influence these coherences in multichromophoric arrays. However, disentangling these interactions requires studies of molecular systems with tunable structural relationships. Here, we use a combination of two-dimensional electronic spectroscopy and femtosecond stimulated Raman spectroscopy to investigate the role of steric hindrance between chromophores in driving changes to vibronic and vibrational coherences in a series of substituted perylenediimide (PDI) cyclophane dimers. We report significant differences in the frequency power spectra from the cyclophane dimers versus the corresponding monomer reference. We attribute these differences to distortion of the PDI cores from steric interactions between the substituents. These results highlight the importance of considering structural changes when rationalizing vibronic coupling in multichromophoric systems.

Experimental and modeling study of proton and copper binding properties onto fulvic acid fractions using spectroscopic techniques combined with two-dimensional correlation analysis

Fulvic acid (FA) significantly influences the bioavailability and fate of heavy metals in environments, while its acid-base characters and metal binding processes are still unclear. Here, spectroscopic techniques combined with multiple models (e.g., NICA-Donnan model) and two-dimensional correlation spectroscopy (2D COS) were applied to explore the proton and copper binding properties of FA sub-fractions (FA3-FA13). The charge densities, average contents of carboxylic and phenolic groups, average dissociation constants pKa1 and pKa2 of sub-fractions ranged 0–16 meq∙g∙C−1, 5.03–9.58 meq∙g∙C−1, 2.52–4.67 meq∙g∙C−1, 4.15–4.33 and 8.52–9.72, respectively. FA sub-fractions had a relatively narrow distribution of carboxyl group and a broad distribution of phenolic group. FA sub-fractions also exhibited roughly two phenolic hydroxyl groups per every 1–3 phenyl rings. Differential absorbance spectra (DAS) derived Gaussian bands were associated to the inter-chromophore interactions, the changes of molecular conformations and functional groups with copper addition. Differential spectra slopes (DSlope275-295&325-375) were more significant with higher copper concentration and copper amounts bonded to carboxylic groups. UV–Vis and fluorescence spectra with 2D heterospectral COS revealed the copper binding heterogeneities and sequential orders of chromophores and fluorophores, quantitatively confirming by the order of conditional stability constants (log KCu: 4.64–5.56). Salicylic-/polyhydroxyphenolic, hydroxyl and amino groups were strongly associated to the basic units for fluorophores. Sequential changes followed the order of humic-like→fulvic-like materials for FA3/FA5, humic-like→fulvic-like→tryptophan-like materials for FA7, and humic-like→tryptophan-like→fulvic-like→tyrosine-like materials for FA9/FA13. Spectroscopic techniques combined with various models (especially for 2D COS) are beneficial to elucidate the binding heterogeneity and sensitivity for metal-organic matters at the functional group level.

Color-Tunable White-Light-Emitting Materials Based on Liquid-Filled Capsules and Thermally Responsive Dyes.

Color-tunable white-light-emitting materials are currently attracting much attention because of their potential applications in artificial lighting, sensing, and imaging. However, preparation of these systems from organic emitters is often cumbersome due to the interchromophoric interactions occurring upon solvent drying in the final solid materials, which can be hardly predicted and may lead to detrimental effects. To circumvent these obstacles, we have developed a new fabrication methodology that relies on dye encapsulation within liquid-filled capsules, thus enabling direct transfer of the luminescent properties from solution to the solid state and as such, rational design of miniaturized white-light-emitting materials. By introducing a thermally responsive chromophore into the capsules, these materials are further endowed with color tunability, which does not only allow ample modulation of the emitted color but also facilitate external fine control of the system so as to ensure precise realization of white light at the desired temperature and excitation wavelength.

Fine‐Tuning Aromatic Stacking and Single‐Crystal Photoluminescence Through Coordination Chemistry

Organic aromatics usually show a decrease in fluorescence efficiency in the solid state on account of well‐known aggregation induced quenching. We have found that single crystals of coordination polymers consisting of γ‐aminobutyric acid functionalized naphthalenediimide ligand (H2GABA‐NDI) can give rise to highly emissive, broad, and red‐shifted photoluminescence (PL) in the solid state. To better understand the origin of the bandwidth broadening with the π–π stacking distances, we performed time‐resolved PL studies in a series of polymers with a variety of metal centers. We conclude that the broad steady‐state PL signals is originated from a superposition of two emissive states with differing energy and lifetimes, with the lower energy one produced by the interchromophoric interactions mediated by π–π stacking of neighboring NDI units. Our work demonstrates that coordination chemistry is an effective tool to modulate interchromophoric couplings and that simple PL analysis can be used as a measure of the degree of π‐stacking.

Temperature-dependent interchromophoric interaction in a fluorescent pyrene-based metal-organic framework.

Compounds exhibiting tuneable fluorescence emission upon heating or cooling are considered smart materials as their optical properties can be exquisitely controlled by adjusting the external temperature. Herein, we report such a material, which is a porous pyrene-based metal-organic framework with a chemical formula of [Mg1.5(HTBAPy)(H2O)2]·3DMF (H4TBAPy = 1,3,6,8-tetrakis(p-benzoic acid)pyrene), named SION-7. The bulk solid material of SION-7 can display either monomer or excimer fluorescence emission due to the temperature-dependent extent of interchromophoric interactions between the HTBAPy3- ligands within the framework. Consequently, the fluorescence emission colours gradually change from blue at low temperature (80 K) to yellow-green at high temperature (450 K). Interestingly, while kept in a relatively wide temperature range of 80-200 K, SION-7 displays a structured monomer-like spectrum and its colour changes reversibly from deep to light blue. Ex situ variable-temperature (100-350 K) single-crystal X-ray diffractometry studies revealed the impact of solvent content on the optical properties of SION-7, and illustrated the correlation between the position of the phenylene groups of the HTBAPy3- ligands at different temperatures and the interchromophoric interaction. Our study demonstrates a step forward towards the design of tuneable thermofluorochromic materials sought by optoelectronics.

Highly Photostable and Fluorescent Microporous Solids Prepared via Solid-State Entrapment of Boron Dipyrromethene Dyes in a Nascent Metal-Organic Framework.

We report a strategy to synthesize highly emissive, photostable, microporous materials by solid-state entrapment of boron dipyrromethene (BODIPY) fluorophores in a metal-organic framework. Solvent-free mechanochemistry or accelerated aging enabled quantitative capture and dispersal of the PM605 dye within the ZIF-8 framework starting from inexpensive, commercial materials. While the design of emissive BODIPY solids is normally challenged by quenching in a densely packed environment, herein reported PM605@ZIF-8 materials show excellent emissive properties and to the best of our knowledge an unprecedented ∼10-fold enhancement of BODIPY photostability. Time-resolved and steady-state fluorescence studies of PM605@ZIF-8 show that interchromophore interactions are minimal at low dye loadings, but at higher ones lead to through-pore energy transfer between chromophores and to aggregate species.

Effective enhancement of the emission efficiency of tetraphenylporphyrin in solid state by tetraphenylethene modification

Tetraphenylporphyrin (TPP) is a typical red-emitting luminogen showing evident aggregation caused quenching (ACQ) effect. To enhance its emission efficiency in solid state, four tetraphenylethene (TPE) units were attached to the four meso-positions of TPP core via ester group through a facile and efficient route. The derived compound (4(TPE−COO)-TPP) emits red fluorescence (peak at 655 nm) with a good quantum efficiency (Φ) of 7.5%, which is much higher than that of TPP (Φ ∼ 0.1%). In molecular aggregate formed in tetrahydrofuran (THF) and water mixtures, 4(TPE−COO)-TPP has a relative high Φ of 12%. The evidently subdued ACQ behavior can be ascribed to the propeller shape and bulky size of the TPE units, which prevent the close packing and strong π-π interaction of TPP cores. The loose molecular packing and weak interchromophore interactions were validated by different characterization methods including UV-visible absorption, steady state and transient fluorescence spectroscope, X-ray diffraction and scanning electronic microscope observations. It is noted that 4(TPE−COO)-TPP has an emission efficiency of 14.4% in dilute THF solution. This is due to the conjugation break between the TPP and TPE moieties, the rotational and vibrational motions of the phenyl groups cannot quench the fluorescence of 4(TPE−COO)-TPP.

Photophysical characterization of interchromophoric interactions between rhodamine dyes conjugated to proteins

Rhodamine dyes in aqueous solution form non-fluorescent dimers with a plane-to-plane stacking geometry (H-dimers). The self-quenching properties of these dimers have been exploited to probe the conformation and dynamics of proteins using a variety of fluorescence approaches that require the interpretation of fluorescence intensities, lifetimes and fluctuations. Here, we report on a systematic study of the photophysical properties of three rhodamine dyes (tetramethylrhodamine, Alexa 488 and Alexa 546) covalently bound to the E. coli sliding clamp (β clamp) with emphasis on the properties of the H-dimers that form when the dimeric protein is labeled with one dye at each side of the dimer interface. Overall, results are consistent with an equilibrium between non-emissive dimers and unstacked monomers that experience efficient dynamic quenching Protein constructs labeled with tetramethylrhodamine show the characteristic features of H-dimers in their absorption spectra and a c.a. 40-fold quenching of fluorescence intensity. The degree of quenching decreases when samples are labeled with a tetramethylrhodamine derivative bearing a six-carbon linker. H-dimers do not form in samples labeled with Alexa 488 and A546, but fluorescence is still quenched in these samples through a dynamic mechanism. These results should help researchers design and interpret fluorescence experiments that take advantage of the properties of rhodamine dimers in protein research.