Host Rock Interaction Research Articles

Creep behaviour of a buffer material for nuclear fuel waste vault

In the Canadian nuclear fuel waste disposal concept currently under study, one of the prime candidate procedures is the borehole emplacement technique. Each fuel waste container will be placed in a 1.1 m diameter hole in the floor of a disposal vault in deep plutonic rock. The container will be surrounded by buffer material consisting of a mixture of clay and sand. This study examines the creep behaviour of the buffer material in the borehole during interaction with the waste container and the host rock. It simulated the buffer – container – host rock interaction through a small-scale physical model using the loading pressures anticipated in the full-size system. The results from the model tests were compared with those predicted by a finite element analytical model. The creep behaviour of the full-size system was then predicted using the analytical model.From the results, it is evident that the creep behaviour of the buffer material depends significantly on interaction within the container – buffer – host rock system, overburden pressure, and water uptake. At relatively low overburden pressures, the waste container might settle, causing a separation between the buffer material and the container top. However, this could be alleviated by the swelling properties of the buffer material. The secondary creep rates are negligible, and creep in the buffer material is primarily governed by the primary creep stage. Key words: creep, model test, swelling soil, soil deformation, unsaturated soil, finite element analysis.