Interaction Of Electromagnetic Field Research Articles

Thermally Stable Oxide-Capsulated Metal Nanoparticles Structure for Strong Metal-Support Interaction via Ultrafast Laser Plasmonic Nanowelding.

Strong metal-support interaction (SMSI) has drawn much attention in heterogeneous catalysts due to its stable and excellent catalytic efficiency. However, construction of high-performance oxide-capsulated metal nanostructures meets great challenge in materials thermodynamic compatibility. In this work, dynamically controlled formation of oxide-capsulated metal nanoparticles (NPs) structures is demonstrated by ultrafast laser plasmonic nanowelding. Under the strong localized electromagnetic field interaction, metal (Au) NPs are dragged by an optical force toward oxide NPs (TiO2). Intense energy is simultaneously injected into this heterojunction area, where TiO2 is precisely ablated. With the embedding of metal into oxide, optical force on Au gradually turned from attractive to repulsive due to the varied metal-dielectric environment. Meanwhile, local ablated oxides are redeposited on Au NP. Upon the whole coverage of metal NP, the implantation behavior of metal NP is stopped, resulting in a controlled metal-oxide eccentric structure with capsulated oxide layer thickness ≈0.72-1.30nm. These oxide-capsulated metal NPs structures can preserve their configurations even after thermal annealing in air at 600°C for 10min. This ultrafast laser plasmonic nanowelding can also extend to oxide-capsulated metal nanostructure fabrication with broad materials combinations (e.g., Au/ZnO, Au/MgO, etc.), which shows great potential in designing/constructing nanoscale high-performance catalysts.

Modeling of axion and electromagnetic fields interaction in particle-in-cell simulations

The axion, a theoretically well-motivated particle, has been searched for extensively via its hypothetical interactions with ordinary matter and fields. Recently, a new axion detection approach has been considered utilizing the ultra-intense electromagnetic fields produced by laser–plasma interactions. However, a detailed simulation tool has not hitherto been available to help understand the axion-coupled laser–plasma interactions in such a complex environment. In this paper, we report a custom-developed particle-in-cell (PIC) simulation method that incorporates the axion field, the electromagnetic fields, and their interactions. The axion field equation and modified Maxwell’s equations are numerically solved, with the axion-induced modulation of the electromagnetic field being treated as a first-order perturbation to handle the huge orders of magnitude difference between the two types of field. The simulation is benchmarked with well-studied effects such as axion–photon conversion and the propagation of an extremely weak laser pulse in a magnetized plasma. Such an extended PIC simulation provides a powerful tool to study axions under ultra-intense electromagnetic fields in the laboratory or in astrophysical processes.

Evaluation of Scale-dependent Kurtosis with HelioSwarm

Plasma turbulence involves complex, nonlinear interactions of electromagnetic fields and charged particles across multiple scales. Studying these phenomena in space plasmas, like the solar wind, is facilitated by the intrinsic scale separations and the availability of in situ spacecraft observations. However, the single-point or single-scale configurations of current spacecraft limit our understanding of many properties of the turbulent solar wind. To overcome these limitations, multipoint measurements spanning a range of characteristic scales are essential. This Letter prepares for the enhanced measurement capabilities of upcoming multispacecraft missions by demonstrating that higher-order statistics, specifically kurtosis, as a baseline for intermittency can be accurately measured. Using synthetic turbulent fields with adjustable intermittency levels, we achieve scale separations analogous to those in the solar wind and apply these techniques to the planned trajectories of the HelioSwarm mission. This approach promises significant advancements in our understanding of plasma turbulence.

Interaction of electromagnetic fields with body-onboard devices

The aim of this contribution is to analyze and discuss the perturbations of body-onboard medical devices caused by electromagnetic field radiations. This involves their control via electromagnetic compatibility analysis and their protection against such perturbations. The wearable, detachable, and embedded devices are first presented and their monitoring, control, forecasting, and stimulating functions are detailed. The interaction of these devices with field exposures comprising their wireless routines is then analyzed. The perturbations control of onboard devices is investigated through the mathematical solution of governing electromagnetic field equations and their appropriate protection strategies are deliberated. The involved investigations and analyses in the contribution are supported by a literature review.

Effect of electromagnetic field interaction on photon emission of infusions of selected plants

Effect of electromagnetic field interaction on photon emission of infusions of selected plants

Decoupling analysis for different exciting modes in MIMO DRA using absorbing surface walls

SummaryIn this paper, a decoupling mechanism is discussed for different mode excitations in the cylindrical dielectric resonator antenna (cDRA) by utilizing absorbing surface wall. In the cDRA, the fundamental radiating mode is HE11δ. Another higher order mode for radiation purpose in cDRA is HE12δ. Both HE11δ and HE12δ create broadside radiation. To analyze multiple‐input multiple‐output (MIMO) performance, two different dual‐port DRAs are proposed. Each antenna structure consists of two DRA with dual similar ports supporting the same mode. Therefore, two different antenna structures are proposed for two different modes. For each antenna, two 2 × 3 absorber array walls are designed, and they are placed in between the DRA to reduce the mutual coupling. When the absorber array walls are placed in between the antenna elements, they blocked the free‐space electromagnetic (EM) field interaction in between the DRA. Due to the reduction of free‐space radiation interaction, the mutual coupling between the ports is improved tremendously. For both HE11δ and HE12δ modes, the mutual coupling is reduced by more than 10 dB. To analyze efficacy of the proposed method, the antenna structure featuring the HE11δ mode is fabricated and experimentally tested.

Inspection of Liner Wall Thinning and Interface Debonding in Bimetallic Lined Pipes Using Pulsed Eddy Current Testing.

Bimetallic lined pipe (BLP) has been increasingly used in offshore and subsea oil and gas structures, but how to identify the invisible inner defects such as liner wall thinning and interface debonding is a challenge for future development. A nondestructive testing (NDT) method based on pulsed eddy current testing (PECT) has been proposed to face these difficulties. The inspection of the BLP specimen (AISI1020 base tube and SS304 liner) is implemented from outside of the pipe by using a transmitter-receiver-type PECT probe consisting of two induction coils. By simplifying the BLP specimen to stratified conductive plates, the electromagnetic field interaction between the PECT probe and specimen is analytically modeled, and the probe inspection signals due to liner wall thinning and interface debonding are calculated. In order to highlight the weak response (in microvolts) from the liner, the inspection signals are subtracted by the signal, which is calculated in the case of only having a base tube, yielding differential PECT signals. The peak voltage of the differential signal is selected to characterize the liner wall thinning and interface debonding due to its distinguishable and linear variation. Experiment verification is also carried out on a double-walled specimen simulated by a combination of a Q235 casing pipe and SS304 tubes of different sizes. The experimental results basically agree with the analytical predictions. The peak value of the PECT signal has an ascending and descending variation with the increase in the remaining liner wall thickness and debonding gap, respectively, while the negative peak value shows opposite changes. The peak value exhibits a larger sensitivity than the negative peak value. The proposed method shows potential promise in practical applications for the evaluation of the inner defects in BLP lines.

Modelling and simulation of radiofrequency electromagnetic field interaction with a human urogenital system

Modelling and simulation of radiofrequency electromagnetic field interaction with a human urogenital system

Analysis of the Interaction Effects of Electromagnetic Fields with Major Living Tissues—One Health Concept Numerical Evaluation Strategy

The well-being and sociability of individuals have always been part of modernity. The development of new technologies that meet these aspirations is receiving increasing attention. Thus, strengthening the desired objectives of these technologies and minimizing their undesirable side effects is the subject of growing commitment. The present contribution aims, in this context, to evaluate and analyze the desired and undesirable effects of the interaction of electromagnetic fields with living tissues in general. These are routines based on mathematical modeling reinforcing the expected functions as well as those of control and protection against undesirable effects. These adverse effects correspond to the “One Health” concept, which encompasses the health of animals, plants and humans, as well as ecological disorders created by human activity. First, in this article, the interactions of electromagnetic fields with tissues are analyzed, involving their thermal biological effects of desired and undesired exposures. The roles of blood and sap fluids in bio-affected tissues are then analyzed. Secondly, the equations governing electromagnetics and bio-heat, as well as their coupled solution are studied. Third, the thermal behavior of tissues and the adverse effects of exposure are examined. Next, monitoring and defending the effects of exposures are discussed. This contribution, supported by a review of the literature, illustrates routines for mathematical modeling of the generalized interaction of electromagnetic fields with living tissues.

Numerical solution-based algorithm assisted development of a continuous flow microwave reactor

Continuous flow microwave heating is a sustainable technology favored in the chemical and food processing sectors due to its short residence time and relatively low environmental footprint. To address the complexity of fluid dynamics and electromagnetic field interactions, nuanced evaluation methods beyond conventional reflection coefficient analysis are necessary to predict its efficiency and uniformity. In this study, a numerical solution-based algorithm is utilized to propose synchrony and cumulative index metrics for performance analysis. Although identical S-parameter systems demonstrate approximate electromagnetic power loss density in the fluid region, significant disparities in heating performance are observed, evidenced by outlet temperatures ranging between 108.10 °C and 147.09 °C, and covariances ranging from 0.07 to 0.46. The power loss density is corrected based on velocity to introduce the synchrony index, which is further calculated into the cumulative index. This approach provides accurate predictions of efficiency and uniformity, informing system designs that align with specific performance objectives. To achieve the best uniformity in simulated two-part systems, a combination of 63 % GIM system and 37 % EBH-2 system in terms of power input was found to be optimal. However, when considering temperature dependent dielectric properties, the optimal combination was adjusted to 60 % GIM system and 40 % EBH-4 system. The numerical solution-based algorithm facilitates optimization of complex continuous flow microwave systems, providing invaluable insights into the time–space electromagnetic response mechanism of fluids.

A Methodology for the Preliminary Design of a High-Efficiency Multistage Plasma Thruster

Space electric propulsion represents a class of power-limited systems that utilize the interaction of electromagnetic fields with ionized inert gas propellants to generate thrust. This technology has emerged as a highly fuel-efficient and sustainable alternative to chemical propulsion systems, particularly for satellite constellations. However, the miniaturization potential of EP systems is impeded by certain limitations, necessitating the exploration of novel architectures. The high-efficiency multistage plasma thruster (HEMP-T) stands as a promising contender for stand-alone missions due to its employment of a cusped magnetic-field topology, which effectively mitigates plasma-wall interactions and enhances overall efficiency even at low thrust levels. Despite the growing interest in HEMP-Ts, there is a dearth of comprehensive and streamlined preliminary design procedures for these systems. Prior research has predominantly focused on extensive numerical analyses, neglecting the development of efficient and accessible design tools. To bridge this gap, this paper presents a novel preliminary design tool derived from integrating established analytical models available in the literature. The proposed design tool also incorporates an iterative procedure that refines geometric properties using a 2D magnetostatic solver. Through the application of this tool, a 4 mN HEMP thruster was analyzed. This finally exhibited a specific impulse of approximately 2000s and a good efficiency level of 23%. Also, the results obtained for a 10 mN application align closely with those achieved by other types of EP thrusters.

Fermionic quantum gas at finite temperature within a Lorentz-violating background

In this work we consider a fermionic quantum gas within a Lorentz-violating background at finite temperature. We derive the effective action within path integral formalism considering the interaction of external electromagnetic field and Lorentz-violating background fields with quantum fermions. To introduce the temperature effects, we employ the Matsubara formalism. Comments about the corresponding phenomenology are also made.

Electromagnetic Field Interaction With a Gainy Slab

Electromagnetic Field Interaction With a Gainy Slab

Fuzzy-Based Bioengineering System for Predicting and Diagnosing Diseases of the Nervous System Triggered by the Interaction of Industrial Frequency Electromagnetic Fields.

The study aims to enhance the standard of medical care for individuals working in the electric power industry who are exposed to industrial frequency electromagnetic fields and other relevant risk factors. This enhancement is sought through the integration of fuzzy mathematical models with contemporary information and intellectual technologies. The study addresses the challenges of forecasting and diagnosing illnesses within a specific demographic characterized by a combination of poorly formalized issues with interconnected conditions. To tackle this complexity, a methodological framework was developed for synthesizing hybrid fuzzy decision rules. This approach combines clinical expertise with artificial intelligence methodologies to promote innovative problem-solving strategies. Additionally, the researchers devised an original method to evaluate the body's protective capacity, which was integrated into these decision rules to enhance the precision and efficacy of medical decision-making processes. The research findings indicate that industrial frequency electromagnetic fields contribute to illnesses of societal significance. Additionally, it highlights that these effects are worsened by other risk factors such as adverse microclimates, noise, vibration, chemical exposure, and psychological stress. Diseases of the neurological, immunological, cardiovascular, genitourinary, respiratory, and digestive systems are caused by these variables in conjunction with unique physical traits. The development of mathematical models in this study makes it possible to detect and diagnose disorders in workers exposed to electromagnetic fields early on, especially those pertaining to the autonomic nervous system and heart rhythm regulation. The results can be used in clinical practice to treat personnel in the electric power industry since expert evaluation and modeling showed high confidence levels in decision-making accuracy.

Models of the interaction of the electromagnetic field of mobile systems of low-frequency inductive electrical exploration and conducting ferromagnetic bodies

The subject of the article is a review of the author's proposed dynamic models of the interaction of the primary electromagnetic harmonic field of mobile electromagneticexploratorysystems and the secondary (eddy current) field of a conducting body with ferromagnetic properties and proposals for new applications of such and similar systems.These models make it possible to theoretically substantiate the shape of the signal from a ferromagnetic body. A signal of this form was often observed by moving systems in practice, but it had no theoretical explanation and was therefore not used. The purpose of the review is to acquaint the wider scientific community with the new possibilities of mobile electromagnetic exploratory systems. In particular, this is the ability of mobile electromagnetic exploratory systems to detect conductive bodies not only with diamagnetic properties, but also with ferromagnetic ones in the ground and water, based on appropriate signals.

On-Chip Integration of a Plasmonic FET Source and a Nano-Patch Antenna for Efficient Terahertz Wave Radiation.

Graphene-based Field-Effect Transistors (FETs) integrated with microstrip patch antennas offer a promising approach for terahertz signal radiation. In this study, a dual-stage simulation methodology is employed to comprehensively investigate the device's performance. The initial stage, executed in MATLAB, delves into charge transport dynamics within a FET under asymmetric boundary conditions, employing hydrodynamic equations for electron transport in the graphene channel. Electromagnetic field interactions are modeled via Finite-Difference Time-Domain (FDTD) techniques. The second stage, conducted in COMSOL Multiphysics, focuses on the microstrip patch antenna's radiative characteristics. Notably, analysis of the S11 curve reveals minimal reflections at the FET's resonant frequency of 1.34672 THz, indicating efficient impedance matching. Examination of the radiation pattern demonstrates the antenna's favorable directional properties. This research underscores the potential of graphene-based FETs for terahertz applications, offering tunable impedance matching and high radiation efficiency for future terahertz devices.

Variational Approach to Relativistic Fluid and Quantum Mechanics

In previous papers we have shown how Schrödinger’s equation which includes an electromagnetic field interaction can be deduced from a fluid dynamical Lagrangian of a charged potential flow that interacts with an electromagnetic field. The quantum behaviour was derived from Fisher information terms which were added to the classical Lagrangian. It was thus shown that a quantum mechanical system is drived by information and not only electromagnetic fields.This program was applied also to Pauli’s equations by removing the restriction of potential flow and using the Clebsch formalism. Although the analysis was quite successful there were still terms that did not admit interpretation, some of them can be easily traced to the relativistic Dirac theory. Here we repeat the analysis for a relativistic flow, pointing to a new approach for deriving relativistic quantum mechanics.

A Fluid Perspective of Relativistic Quantum Mechanics.

In previous papers, it has been shown how Schrödinger's equation which includes an electromagnetic field interaction can be deduced from a fluid dynamical Lagrangian of a charged potential flow that interacts with an electromagnetic field. The quantum behaviour is derived from Fisher information terms added to the classical Lagrangian, showing that a quantum mechanical system is driven by information and not only electromagnetic fields. This program was applied to Pauli's equations by removing the restriction of potential flow and using the Clebsch formalism. Although the analysis was quite successful, there were terms that did not admit interpretation, a number of which can be easily traced to the relativistic Dirac theory. Here, this analysis is repeated for a relativistic flow, pointing to a new approach for deriving relativistic quantum mechanics.

Resonant Scattering of Gravitational Waves with Electromagnetic Waves

A certain class of exact solutions of Einstein Maxwell spacetime in general relativity is discussed to demonstrate that at the level of theory, when certain parametric resonance condition is met, the interaction of electromagnetic field with a gravitational wave will display certain Lyapunov instability and lead to exponential amplification of a gravitational wave train described by certain Newman–Penrose component of the Weyl curvature. In some way akin to a free electron laser in electromagnetic theory, by the conversion of electromagnetic energy into gravitational energy in a coherent way, the feasibility of generating a pulsed-laser-like intense beam of gravitational wave is displayed.

High‐Speed Modulations of Guided Terahertz Waves via 2DEG Tiny Metasurfaces

AbstractMetasurfaces have emerged as fascinating planar optical components and devices, and, in particular, active metasurfaces confer more multifunctional expansions. However, the metasurface research has mainly focused on operating the light in free space, which hardly satisfies the system‐level compactness and miniaturization. The potential of the metasurface for guided wave modulation remains to be further developed. Here, an integrated electronic device is reported by embedding a tiny metasurface, which consists of several patterned 2D electron gas (2DEG) microstructures in a waveguide. This device suppresses excessive parasitism to improve the modulation speed and enhances the electromagnetic field interaction to improve the modulation efficiency. It is experimentally demonstrated that high‐speed modulations are electrically excited by the guided terahertz waves on a time scale of 40 ps via the tiny metasurface. This scheme represents a new platform for compact and high‐speed integrated electronics.