Intensity Modulation Direct Detection Research Articles

Extending the coverage of user-diversified IM-DD PON by FDM: a mathematical model with experimental verification.

Future passive optical networks (PONs) call for more flexibility to support diversified users with various rate demands and link qualities. Using traditional time-division multiplexing (TDM), the concept of a flexible rate PON was proposed to accommodate more users with link diversity by rate adaptation. In this Letter, we reveal the PON coverage can be further extended through frequency-division multiplexing (FDM) in the presence of multiuser diversity, namely, (i) there exist users with frequency-dependent link conditions and (ii) the link conditions exhibit disparity among users. We build a mathematical model and propose an optimization algorithm based on the binary tree search to optimize diversity gain. We experimentally verify its feasibility by studying the diversity gain concerning chromatic dispersion, optical path loss, and signal-to-noise ratio (SNR) variation in a 200G-class intensity-modulation direct-detection (IM-DD) system.

MPLC-based low-modal-crosstalk nine-mode-group demultiplexer for DSP-free IM/DD MDM transmission over MMF

Weakly coupled mode-division multiplexing (MDM) transmission over legacy laid multimode fiber (MMF) has great economic efficiency and can enormously enhance the capacity of short-reach optical interconnections. In order to be compatible with cost-efficient intensity-modulation/direct-detection (IM/DD) transceivers, weakly coupled mode-group demultiplexers that can simultaneously receive each mode group of MMFs are highly desired. In this paper, we propose a scalable low-modal-crosstalk mode-group demultiplexer over MMF based on multiplane light conversion (MPLC). Multiple input Hermite–Gaussian (HG) modes of MMF are first converted to bridging modes that are composed of HG00 modes distributed as a right-angle triangle in Cartesian coordinates, and then each HG00 mode belonging to a degenerate mode group is mapped to different overlapped HGn0 modes with vertical orientation for simultaneous detection. With the help of bridging modes, the MPLC-based mode-group demultiplexer can efficiently demultiplex all mode groups in standard MMFs with less than 20 phase masks. A nine-mode-group demultiplexer is further designed for demonstration, and simulation results show that the MPLC-based demultiplexer achieves low modal crosstalk of lower than −22.3dB at 1550 nm and lower than −17.9dB over the C-band for all the nine mode groups with only 16 phase masks.

Photodetector with a metalens packaging module for visible light communication based on RGBY illumination LED light source

A novel, to the best of our knowledge, photodetector with a metalens packaging module used as the visible light communication (VLC) receiver is proposed and designed. An LED consisting of red, green, blue, and yellow chips (RGBY-LED) is adopted as the transmitter for intensity modulation direct detection VLC systems. A metalens array with a numerical aperture (NA) of 0.707 used as a polarization-insensitive planar lens of the VLC system receiver is designed at wavelengths of 457, 523, 592, and 623 nm corresponding to blue, green, yellow, and red for high efficiency. Compared with a traditional Fresnel lens positive-intrinsic-negative (PIN) photodetector module as the VLC receiver, the introduction of a metalens module can decrease the form factor of the VLC receiver module and, in particular, it is much thinner. The combination of the multi-color LED transmitter and photodetector metalens packaging module receiver can increase the modulation bandwidth due to four different wavelengths used for the VLC system. Finite-difference time domain (FDTD) simulations are performed to validate the performance of the photodetector with a metalens module. It is revealed that the corresponding efficiencies of 57.5%, 55.4%, 57%, and 56.3% were achieved at wavelengths of 623, 592, 523, and 457 nm, respectively, based on a metalens array with a 0.707 NA and 2.5 µm radius of the active area of the photodetector. It is a promising technology for indoor VLC systems such as those for smart phones and other Internet of Things devices due to the need for compact packaging for the receiver.

End-to-end learning strategy based on a frequency domain feature decoupling network emulator with joint probabilistic shaping and equalization for a 300-Gbit/s OAM mode division multiplexing transmission

Mode coupling and device nonlinear impairment appear to be a long-standing challenge in the orbital angular momentum (OAM) mode division multiplexing (MDM) of intensity modulation direct detection (IM/DD) transmission systems. In this paper, we propose an end-to-end (E2E) learning strategy based on a frequency domain feature decoupling network (FDFDnet) emulator with joint probabilistic shaping (PS) and equalization for an OAM-MDM IM/DD transmission with three modes. Our FDFDnet emulator can accurately build a complex nonlinear model of an OAM-MDM system by separating the signal into features from different frequency domains. Furthermore, a FDFDnet-based E2E strategy for joint PS and equalization is presented with the aim of compensating the signal impairment for the OAM-MDM IM/DD system. An experiment is carried out on a 300 Gbit/s carrierless amplitude phase-32 (CAP-32) signal with three OAM modes over a 10 km ring-core fiber transmission, and the results show that the proposed FDFDnet emulator outperforms the traditional CGAN emulator, with improvements in the modelling accuracy of 30.8%, 26.3% and 31% for the three OAM modes. Moreover, the receiver sensitivity of the proposed E2E learning strategy is higher than for the CGAN emulator by 3, 2.5, 2.2 dBm and the real channel by 5.5, 5.1, and 5.3 dBm for the three OAM modes, respectively. Our experimental results demonstrate that the proposed FDFDnet emulator-based E2E learning strategy is a promising contender for achieving ultra-high-capacity interconnectivity between data centers.

High-speed data transmission over a microresonator frequency comb with dispersion compensation for augmented data rates and reach

Abstract Microresonator frequency comb-based high-speed data transmission provides a pathway towards augmented data capacity without increasing the number of laser sources. Their use with intensity-modulated direct detection modulation (IMDD) formats is especially pertinent in data center communications where minimizing cost, latency and complexity is paramount. This however implies that the same extent of digital signal processing techniques commonly used in coherent detection for the management of fiber impairments including chromatic dispersion are not available. With the proliferation of silicon photonics technologies in data center transceivers integrated dispersion compensation which can overcome fiber impairments would be of great merit. We demonstrate low power generation of the primary comb state in a silicon nitride microresonator and transmission of 25 Gb/s NRZ and 50 Gb/s PAM4 data over 20 km of single mode fiber. This represents the longest fiber reach demonstrated to date for the transmission of IMDD data using an integrated, microresonator frequency comb. An integrated, tunable grating device for dispersion compensation that reduces dispersion impairments after several fiber lengths generates significant improvements in the eye diagram, six orders of magnitude improvement in the bit-error rate and 14 dB improvement in the transmitter and dispersion eye closure quaternary values. Concurrently, doubling data transmission is demonstrated via polarization multiplexing a comb line and successful dispersion compensation of up to 20 km.

Time transfer over 113 km free space laser communication channel.

The space time frequency transfer plays a crucial role in applications such as space optical clock networks, navigation, satellite ranging, and space quantum communication. Here, we propose a high-precision space time frequency transfer and time synchronization scheme based on a simple intensity modulation/direct detection (IM/DD) laser communication system, which occupies a communication bandwidth of approximately 0.2%. Furthermore, utilizing an optical-frequency comb time frequency transfer system as an out-of-loop reference, experimental verification was conducted on a 113 km horizontal atmospheric link, with a long-term stability approximately 8.3 × 10-16 over a duration of 7800 seconds. Over an 11-hour period, the peak-to-peak wander is approximately 100 ps. Our work establishes the foundation of the time frequency transfer, based on the space laser communication channel, for future ground-to-space and inter-satellite links.

Pairwise Tomlinson-Harashima precoding for multiple-lane IM-DD transmissions.

As for the photonic interconnection based on the multiple-lane intensity modulation direct detection (IM-DD) transmission, both intra-channel inter-symbol-interference (ISI) originating from bandwidth constraint, and inter-channel performance discrepancy emerging from inter-channel component differences are the major bottleneck for the throughput enhancement. Here, we propose a pairwise Tomlinson-Harshima precoding (P-THP) scheme, in order to simultaneously deal with both intra-channel ISI and inter-channel performance discrepancy. The effective function of the proposed P-THP scheme is experimentally evaluated by transmitting 4-channel 81-GBaud PAM4 signals over 2 km standard single-mode fiber (SSMF). Compared with the conventional scheme with only applying THP on individual wavelength channel, the required optical received power (ROP) under the back-to-back (B2B) transmission can be reduced by 0.75∼1 dB with the help of proposed P-THP in different experimental component configurations, at the 7% hard decision forward error correction (HD-FEC) threshold of BER = 3.8 × 10-3. After the 2 km SSMF transmission, only the use of proposed P-THP can guarantee to reach the designated HD-FEC threshold, leading to a net rate of >600 Gbit/s.

Photonic Gateway accommodating all types of wavelength paths for digital-coherent and IM-DD user terminals in all-photonic metro-access converged networks

In access and metro networks, there is increasing demand for guaranteed wide-bandwidth and stringent/deterministic end-to-end latency characteristics. Converging these networks by expanding dense wavelength-division-multiplexed metro networks to access areas is a promising approach to satisfy this demand. An All-Photonics Metro-Access Converged Network (APN) dynamically and flexibly provides a wavelength connection between any two points including user premises. This evolution in network architecture presents some technical challenges. First, from the access-node architecture viewpoint, conventional reconfigurable optical add/drop multiplexers (ROADMs) do not have functions for remote and in-channel user-terminal (UT) control or turn-back connection within the access area. Therefore, the APN cannot be achieved by simply adopting ROADMs as access nodes, which are defined as Photonic Gateways. Remote and in-channel UT controls are required to control the endpoints of a wavelength path beyond the carrier control-plane network. These types of control should be independent of the protocol and modulation/detection method for the main signal. In addition, the Photonic Gateway must flexibly and efficiently support a new type of wavelength path, specifically a turn-back connection within the access area, due to metro/access convergence. Second, from the viewpoint of the process for dynamic wavelength-path provisioning, the APN controller should autonomously discover physical connectivity between a UT and the Photonic Gateway connected via field access fibers. This paper proposes a novel Photonic Gateway architecture that flexibly and scalably provides various UTs with direct optical connections including turn-back configurations. This paper also proposes a method that autonomously recognizes physical connections between newly connected UTs and the Photonic Gateway. The proposed architecture and method are experimentally verified based on all types of wavelength-path provisioning that take at most 72 s using Photonic Gateway prototypes, 100-Gb/s digital-coherent UTs, and 10-Gb/s intensity-modulation direct-detection UTs. All types of wavelength paths that are provided over the APN architecture are considered including a turn-back connection between two UTs within the same access area and connections between two UTs that traverse the metro area with or without optical/electrical conversion.

OAM mode-division multiplexing IM/DD transmission at 4.32 Tbit/s with a low-complexity adaptive-network-based fuzzy inference system nonlinear equalizer.

Stochastic nonlinear impairment is the primary factor that limits the transmission performance of high-speed orbital angular momentum (OAM) mode-division multiplexing (MDM) optical fiber communication systems. This Letter presents a low-complexity adaptive-network-based fuzzy inference system (LANFIS) nonlinear equalizer for OAM-MDM intensity-modulation direct-detection (IM/DD) transmission with three OAM modes and 15 wavelength division multiplex (WDM) channels. The LANFIS equalizer could adjust the probability distribution functions (PDFs) of the distorted pulse amplitude modulation (PAM) symbols to fit the statistical characteristics of the WDM-OAM-MDM transmission channel. Therefore, although the transmission symbols in the WDM-OAM-MDM system are subjected to a stochastic nonlinear impairment, the proposed LANFIS equalizer can effectively compensate the distorted signals. The proposed equalizer outperforms the Volterra equalizer with improvements in receiver sensitivity of 2, 1.5, and 1.3 dB for three OAM modes at a wavelength of 1550.12 nm, respectively. It also outperforms a CNN equalizer, with improvements in receiver sensitivity of 1, 0.5, and 0.3 dB, respectively. Moreover, complexity reductions of 67%, 74%, and 99.9% are achieved for the LANFIS equalizer compared with the Volterra, CNN, and ANFIS equalizers, respectively. The proposed equalizer has high performance and low complexity, making it a promising candidate for a high-speed WDM-OAM-MDM system.

Fast QoT estimation method using cascaded artificial neural network for real-time path provisioning in IMDD based all-optical networks.

We propose a fast quality of transmission (QoT) estimation method based on cascaded artificial neural networks (ANNs) for intensity modulation-direct detection (IMDD) systems. The proposed method can calculate the bit error rate of three-span 36 km transmission within 0.7 seconds while taking account of the deterministic waveform distortion caused by the chromatic dispersion and self-phase modulation (SPM).

Higher-speed PONs based on data center technology and optics [Invited

Data center interconnects are currently the fastest growing market for optical interconnect technology and innovations. Data centers must upgrade their infrastructure regularly to keep up with increasing bandwidth demand from digital services. Successive Ethernet generations based on intensity-modulated direct-detection progressed to 50 GBd per lane and will reach 100 GBd per lane before the end of this decade. Also, the continued reduction in complexity, power consumption, and cost of coherent technologies will eventually lead to adoption of it in short-reach coherent in the intra-data center, which will further drive volumes of low-cost coherent technologies. Passive optical networks (PONs) depend mostly on the availability of high-volume, low-cost components. In this paper we will review the benefits as well as challenges to overcome in adoption of the Ethernet data center ecosystem as a low-power, cost-effective technology for next-generation time-division-multiplexed PONs.

Performance of Adaptive Bit-Interleaved Polar Coded Modulation in FSOC System

This paper proposes an adaptive bit-interleaved polar coded modulation (A-BIPCM) method based on minimum logarithmic upper bound weight (MLUW). It is designed to reduce the fading effects and long string of bit error interference caused by atmospheric turbulence in free-space optical communications (FSOC). To assess the effectiveness of this method across turbulent channels of varying intensities, we conducted an evaluation of the bit error rate (BER) performance of polar codes in turbulent channels. The results demonstrate significant performance improvements provided by the A-BIPCM method compared to conventional polar code encoding and decoding. Specifically, under weak, moderate, and strong turbulence conditions, the A-BIPCM method achieves performance gains of 0.96 dB, 1.66 dB, and 1.35 dB, respectively. Additionally, an experimental verification platform for FSOC employing intensity modulation direct detection (IM/DD) with an atmospheric turbulence simulation channel, is established in this work. When the optical power of the detector is −16 dBm, the traditional polar code encoding and decoding performance at BER = 2.36 × 10−5, whereas the A-BIPCM scheme exhibits a significantly higher performance at BER = 2.11 × 10−6. The BER has been improved by representing an order of magnitude.

High-speed reach-extended IM-DD system with low-complexity DSP for 6G fronthaul [Invited

With the rising traffic demand from the metaverse, holographic communications, and so on, in beyond-5G (B5G)/6G cloud radio access networks (C-RANs), fronthaul (FH) networks that transport radio information between antennas and distributed/central units will become increasingly demanding. Optical technologies are indispensable in supporting 6G FH deployment, which needs to be high-speed and power/cost-effective simultaneously; low latency is also crucial. This work is extended from our invited paper at OFC2023. While the conference version focused on the wired-wireless conversion/converging side [e.g., using digital signal processing (DSP)-enhanced radio-over-fiber (RoF) techniques] of FH, this work contributes to the complementary side, i.e., optical transmission techniques. Considering 6G capacity and cost requirements, beyond-200-Gb/s/λ optics based on intensity-modulation direct-detection (IM-DD) PAM4 and low-complexity DSP are targeted, which transparently support digital RoF techniques like analog-to-digital-compression (ADX)-RoF (split Option 8) or Delta-sigma RoF, and other functional split options. On the other hand, while the reach of 5G FH may be around 10 km, in 6G FH routing and/or rural connectivity cases, distance can be extended to 20 km or even 40 km. In these scenarios, fiber dispersion in the C-band and even edge wavelengths of the O-band pose a significant challenge for the reach extension of 200G IM-DD systems. We validate through extensive experiments the efficient FH reach extension and dispersion mitigation based on a low-complexity optoelectronic feedforward equalization (OE-FFE) technique. We experimentally verify 224 Gb/s single-wavelength and dense WDM transmissions over up to 41 km distances in the challenging C-band with lean digital equalizers and hard-decision forward error correction (HD-FEC), which are among the first demonstrations to our knowledge. Even with split Option 8 and extended reach, the FH systems support up to a 10 Tb/s Common Public Radio Interface (CPRI)-equivalent rate and >300Gb/s peak wireless data rate. The presented systems can be useful for high-capacity, reach-extended FH scenarios toward 6G.

Three-dimensional geometrically shaped constellation based on regular octahedron cells for IM/DD system

A three-dimensional (3D) constellation based on geometric shaping (GS) and probabilistic shaping (PS) is proposed for an intensity modulation/direct detection (IM/DD) system. The GS of 3D constellation is based on regular octahedron cells, and combined with PS using Huffman coding, the constellation figure of merit (CFM) and bit error rate (BER) performance of 3D constellation can be significantly improved. Results demonstrate that proposed 19-ary 3D constellation achieves a 2.2 dB receiver sensitivity gain compared with traditional 16-ary 3D constellation at the BER of 3.8 × 10-3. Moreover, the probabilistically shaped 19-ary 3D constellation exhibits a BER that is reduced by around one order of magnitude compared with the non-shaped 19-ary 3D constellation for the same transmission distance. In addition, the proposed 19-ary 3D constellation exhibits superior performance in terms of transmission distance and data rate compared with traditional 16-ary 3D constellation and GS 16-ary 3D constellation.

Bayesian generative adversarial network emulator based end-to-end learning strategy of the probabilistic shaping for OAM mode division multiplexing IM/DD transmission.

Orbital angular momentum (OAM) mode division multiplexing (MDM) has emerged as a new multiplexing technology that can significantly increase transmission capacity. In addition, probabilistic shaping (PS) is a well-established technique that can increase the transmission capacity of an optical fiber to close to the Shannon limit. However, both the mode coupling and the nonlinear impairment lead to a considerable gap between the OAM-MDM channel and the conventional additive white Gaussian noise (AWGN) channel, meaning that existing PS technology is not suitable for an OAM-MDM intensity-modulation direct-detection (IM-DD) system. In this paper, we propose a Bayesian generative adversarial network (BGAN) emulator based on an end-to-end (E2E) learning strategy with probabilistic shaping (PS) for an OAM-MDM IM/DD transmission with two modes. The weights and biases of the BGAN emulator are treated as a probability distribution, which can be accurately matched to the stochastic nonlinear model of OAM-MDM. Furthermore, a BGAN emulator based on an E2E learning strategy is proposed to find the optimal probability distribution of PS for an OAM-MDM IM/DD system. An experiment was conducted on a 200 Gbit/s two OAM modes carrierless amplitude phase-32(CAP-32) signal over a 5 km ring-core fiber transmission, and the results showed that the proposed BGAN emulator outperformed a conventional CGAN emulator, with improvements in modelling accuracy of 29.3% and 26.3% for the two OAM modes, respectively. Moreover, the generalized mutual information (GMI) of the proposed E2E learning strategy outperformed the conventional MB distribution and the CGAN emulator by 0.31 and 0.33 bits/symbol and 0.16 and 0.2 bits/symbol for the two OAM modes, respectively. Our experimental results demonstrate that the proposed E2E learning strategy with the BGAN emulator is a promising candidate for OAM-MDM IM/DD optic fiber communication.

Efficient Optical OFDM System Resilience to Indoor Wireless Multipath Channels

This article presents a developed intensity modulation/direct detection (IM/DD) optical orthogonal frequency division multiplexing (O-OFDM). More precisely, the presented C-O-OFDM is based on the C-transform as a unitary orthogonal transform instead of the state-of-the-art discrete Fourier transform (DFT). Due to the properties of the real C-transform, Hermitian symmetry (HS) is not required to produce real OFDM samples. Therefore, the proposed scheme supports twice the input symbols compared to conventional DFT-based OFDM system. Real data mapping and DC bias technology is considered to evaluate the performance of the presented scheme over optical wireless multipath. The simulation results shows that the proposed C-O-OFDM is more resilience to multipath phenomena than the competitive DFT-O-OFDM and DHT-O-OFDM schemes for similar bit rate. The proposed scheme achieves about 22 dB signal-to-noise ratio (SNR) gain in comparison with the DFT-O-OFDM and about 2.5 dB SNR gain in comparison with the DHT-O-OFDM scheme.

Unified performance parameters for IM/DD techniques over gamma-gamma fading channel with pointing errors

In this paper, we discuss the performance of different intensity modulation direct detection techniques (IM-DD) used in free space optical systems (FSO) under different channel impairments such as path loss, atmospheric turbulence, and pointing errors. We derived unified formulas for each of the average symbol error rate (SER) bounds and outage probability for different modulation techniques: OOK, MPPM, and LMPPM. The accuracy of the obtained formulas is validated through comparison with MC-simulation results. Finally, we investigate the effect of system parameters on FSO link performance.

Free Space Optical Communication: An Enabling Backhaul Technology for 6G Non-Terrestrial Networks

The deployment of non-terrestrial networks (NTNs) is envisioned to achieve global coverage for 6G and beyond. In addition to space nodes, aerial NTN nodes such as high-altitude platform stations (HAPSs) and rotary-wing unmanned aerial vehicles (UAVs) could be deployed, based on the intended coverage and operational altitude requirements. NTN nodes have the potential to support both wireless access and backhauling. While the onboard base station provides wireless access for the end users, the backhauling link connects the airborne/space-borne base station to the core network. With its high data transmission capability comparable to fiber optics and its ability to operate in the interference-free optical spectrum, free space optical (FSO) communication is ideally suited to backhauling requirements in NTNs. In this paper, we present a comprehensive tutorial on airborne FSO backhauling. We first delve into the fundamentals of FSO signal transmission and discuss aspects such as geometrical loss, atmospheric attenuation, turbulence-induced fading, and pointing errors, all of which are critical for determining received signal levels and related link budget calculations. Then, we discuss the requirements of airborne backhaul system architectures, based on use cases. While single-layer backhaul systems are sufficient for providing coverage in rural areas, multi-layer designs are typically required to establish connectivity in urban areas, where line of sight (LoS) links are harder to maintain. We review physical layer design principles for FSO-based airborne links, discussing both intensity modulation/direct detection (IM/DD) and coherent modulation/coherent demodulation (CM/CD). Another critical design criteria for airborne backhauling is self-sustainability, which is further discussed in our paper. We conclude the paper by discussing current challenges and future research directions. In this context, we discuss reconfigurable intelligent surfaces (RIS) and spatial division multiplexing (SDM), for improved performance and an extended transmission range. We emphasize the importance of advanced handover techniques and scalability issues for practical implementation. We also highlight the growing role of artificial intelligence/machine learning (AI/ML) and their potential applications in the design and optimization of future FSO-based NTNs.

Ultralow noise C + L wideband WDM-IMDD transmission at 18 × 112 Gbps by using hybrid second-order distributed Raman and first-order lumped Raman amplification.

We experimentally investigated and demonstrated an ultralow noise hybrid amplifier that combines second-order distributed Raman amplifier (DRA) and first-order lumped Raman amplifier (LRA) in a cascaded approach. This approach allows for the reutilization of pump light from the LRA as the seed light in the second-order DRA, and simultaneous full-band dispersion compensation is realized by using dispersion compensation fiber in the LRA. This approach also supports broadband gain flattening based on the separated DRA and LRA configuration. The transmission application of the proposed amplifier was investigated using a set of 10 external cavity lasers (ECLs) in the C-band and 8 ECLs in the L-band. Ranging from 1531.12 nm to 1595.49 nm across C + L band, the proposed hybrid amplifier gives a maximum on-off gain of 27.2 dB and an average gain of 23.4 dB, with an extremely low effective noise figure (NF) of lower than -2.9 dB. Intensity modulation direct detection (IMDD) signal transmission is carried out at two different data rates across these 18 wavelengths in the C + L band: (1) 56 Gbps/λ PAM-4 signal; (2) 112 Gbps/λ PAM-4 signal. The results show that the error free transmissions are demonstrated over 101.6 km EX2000 fiber using both signals with 7% HD-FEC and 20% SD-FEC, respectively.

Enhancing the performance of 16384QAM based on delta-sigma modulation using geometric shaping in an IMDD system.

In this Letter, a new, to the best of our knowledge, geometric shaping method for an ultrahigh-order 16384-ary quadrature amplitude modulation (16384QAM) constellation based on the delta-sigma modulation technique is proposed. Based on the characteristics of delta-sigma modulation, the constellation was optimized to obtain greater constellation gain and improve the maximum performance of the system. Finally, the proposed scheme was demonstrated on an intensity-modulated direct detection (IMDD) system through a 25 km single-mode fiber transmission. On performing experiments, it was found that the suggested approach increases the receiver sensitivity of ultrahigh-order QAM communication systems based on delta-sigma modulation by around 0.5 dB and further enhances the error performance limit.