Abstract
In access and metro networks, there is increasing demand for guaranteed wide-bandwidth and stringent/deterministic end-to-end latency characteristics. Converging these networks by expanding dense wavelength-division-multiplexed metro networks to access areas is a promising approach to satisfy this demand. An All-Photonics Metro-Access Converged Network (APN) dynamically and flexibly provides a wavelength connection between any two points including user premises. This evolution in network architecture presents some technical challenges. First, from the access-node architecture viewpoint, conventional reconfigurable optical add/drop multiplexers (ROADMs) do not have functions for remote and in-channel user-terminal (UT) control or turn-back connection within the access area. Therefore, the APN cannot be achieved by simply adopting ROADMs as access nodes, which are defined as Photonic Gateways. Remote and in-channel UT controls are required to control the endpoints of a wavelength path beyond the carrier control-plane network. These types of control should be independent of the protocol and modulation/detection method for the main signal. In addition, the Photonic Gateway must flexibly and efficiently support a new type of wavelength path, specifically a turn-back connection within the access area, due to metro/access convergence. Second, from the viewpoint of the process for dynamic wavelength-path provisioning, the APN controller should autonomously discover physical connectivity between a UT and the Photonic Gateway connected via field access fibers. This paper proposes a novel Photonic Gateway architecture that flexibly and scalably provides various UTs with direct optical connections including turn-back configurations. This paper also proposes a method that autonomously recognizes physical connections between newly connected UTs and the Photonic Gateway. The proposed architecture and method are experimentally verified based on all types of wavelength-path provisioning that take at most 72 s using Photonic Gateway prototypes, 100-Gb/s digital-coherent UTs, and 10-Gb/s intensity-modulation direct-detection UTs. All types of wavelength paths that are provided over the APN architecture are considered including a turn-back connection between two UTs within the same access area and connections between two UTs that traverse the metro area with or without optical/electrical conversion.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.