Integration Of Energy Storage Systems Research Articles

Literature review of potential materials for the construction of an alternative flat-plate solar collector

Through systematic review method the article presents the potential of existing solar energy in Mozambique for use in water heating with the integration of thermal energy storage systems that are currently being investigated. It emphasizes the need for affordable materials in building solar collectors for Mozambique’s homes, leveraging the country’s solar potential to reduce electricity consumption and environmental impact for sustainable development. It explores current research on thermal energy storage systems for solar water heating and reviews alternative materials for solar collectors based on their properties, cost, and availability. The importance of thermal energy storage in solar collectors for efficiency and load balancing is highlighted., it discusses and list the potential alternative materials for the construction of flat plate solar thermal collectors from roofing material, frame, absorber, pipes, and heat storage material according to their thermophysical properties, costs, and availability in the Mozambican market in the context of industrialization.

Sustainable energy storage solutions for coal-fired power plants: A comparative study on the integration of liquid air energy storage and hydrogen energy storage systems

With the majority of the world's energy demand still reliant on fossil fuels, particularly coal, mitigating the substantial carbon dioxide (CO2) emissions from coal-fired power plants is imperative for achieving a net-zero carbon future. Energy storage technologies offer a viable solution to provide better flexibility against load fluctuations and reduce the carbon footprint of coal-fired power plants by minimizing exergy losses, thereby achieving better energy efficiency. This work focuses on developing two such energy storage technologies: Liquid Air Energy Storage (LAES) and Hydrogen Energy Storage (HES), and their integration strategies with a sub-critical coal-fired power plant. The performance of the integrated systems is analyzed based on key parameters like energy storage capacity, net unit power output during charging and discharging, round-trip efficiencies, and net unit efficiencies at different operating load conditions of the plant. Our results show that during the charging cycles, by increasing the air flow rate in LAES and the hydrogen production rate in HES, the net unit efficiency of the integrated plant decreases by 3–10% at different load conditions, while the energy-based round-trip efficiency increases with increasing liquid air and hydrogen flow rates during the discharge cycles. For the HES system, utilization of the produced hydrogen in the fuel cells gives 40–50% better roundtrip efficiencies than co-firing hydrogen in the boiler at full and minimum load and it increases with increasing hydrogen flow rates. While HES has shown a better overall net unit efficiency (41.5%, in fuel cell scenario) of the integrated unit than the LAES system (40%) for the base case operation, LAES shows superior round-trip efficiencies when operated at higher liquid air discharge flow rates (>80 kg/s). The results provide insights into the system modeling of LAES and HES integrated with a sub-critical coal power plant, contributing to the advancement of sustainable energy storage solutions.

A Combined Persistence and Physical Approach for Ultra-Short-Term Photovoltaic Power Forecasting Using Distributed Sensors.

This paper presents a novel method for forecasting the impact of cloud cover on photovoltaic (PV) fields in the nowcasting term, utilizing PV panels as sensors in a combination of physical and persistence models and integrating energy storage system control. The proposed approach entails simulating a power network consisting of a 22 kV renewable energy source and energy storage, enabling the evaluation of network behavior in comparison to the national grid. To optimize computational efficiency, the authors develop an equivalent model of the PV + energy storage module, accurately simulating system behavior while accounting for weather conditions, particularly cloud cover. Moreover, the authors introduce a control system model capable of responding effectively to network dynamics and providing comprehensive control of the energy storage system using PID controllers. Precise power forecasting is essential for maintaining power continuity, managing overall power-system ramp rates, and ensuring grid stability. The adaptability of our method to integrate with solar fencing systems serves as a testament to its innovative nature and its potential to contribute significantly to the renewable energy field. The authors also assess various scenarios against the grid to determine their impact on grid stability. The research findings indicate that the integration of energy storage and the proposed forecasting method, which combines physical and persistence models, offers a promising solution for effectively managing grid stability.

Solar photovoltaic-integrated energy storage system with a power electronic interface for operating a brushless DC drive-coupled agricultural load

Abstract This article describes the design and construction of a solar photovoltaic (SPV)-integrated energy storage system with a power electronics interface (PEI) for operating a Brushless DC (BLDC) drive coupled to agricultural loads. The proposed system is intended to make use of the electrical power available at under-utilized, pre-installed solar pumps used for irrigation. The PEI allows efficient energy management by charging and discharging depending on available solar power. The BLDC drive is a high-performance motor drive that requires a smooth and stable DC voltage. The bidirectional DC converter provides this while also allowing for efficient energy management between the battery and the solar PV system. The simulation results illustrate that the system is capable of efficiently managing energy between the battery and solar panels, providing a stable DC voltage to drive the BLDC motor. In addition to this, the results demonstrate the feasibility of integrating a solar system with a battery and BDC for driving BLDC in various agricultural applications. The experimental findings validate the simulation outcomes for the proposed setup implemented in pre-installed, untapped SPV systems. The system is able to provide a stable and efficient power source while also allowing for efficient energy management and utilization of solar energy.

Combined utilization of electricity and thermal storages in a highly renewable energy system within an island society

With the increasing share of intermittent renewable energy resources, the demand for different forms of energy storage increases. In this paper, a comparative analysis was performed on two energy storage solutions: small-scale underground pumped hydro storage (PHS) and high-temperature thermal energy storage (HTTES). Using the PLEXOS energy and power system modeling software, the study analyzed the operation and performance of these storage systems in Åland Island, an autonomous region of Finland. The novelty of the paper is in evaluating the business cases of these storage solutions when operating separately and combined. Business cases are studied by comparing annual energies, operating hours, price paid, and price received of the storage types in different scenarios. The results showed that both storages promoted electrification and renewable energy integration, with the HTTES reducing curtailment by 77 % and the PHS by 4 %. The storage systems were also able to take advantage of lower-cost hours of external electricity markets, with the PHS increasing electricity imports by 0.2 % and the HTTES by 1.5 %. Moreover, the PHS enabled the sale of excess electricity to external markets, leading to an increase in exports by 0.3 %. In contrast, the HTTES increased local consumption of excess production, reducing exports by 1.1 %. Results showed that integrating both storage systems in the same energy system could achieve significant benefits, such as reduced curtailment of renewable energy. However, the study also highlighted that the two systems could compete for the same resources in an open energy market, leading to a decrease in annual energy and net profits for both systems. A PHS exhibits an 11 % reduction in annual energies, when compared with operating alone, whereas for an HTTES, the reduction is 1 %. Similarly, the net profit of the PHS is reduced by 25.2 % and that of the HTTES by 4.9 %. Concluding the business case analysis, changes in annual energy and operation hours are not linearly correlated with revenue and charging cost, and the dynamics of the electricity market and the studied energy system must also be considered. Finally, energy storage can be considered a key element in supporting the energy transition; however, the importance of careful planning must be emphasized when integrating energy storage systems into an energy market.

Techno-economic feasibility of integrating hybrid battery-hydrogen energy storage system into an academic building

Green hydrogen production and storage are vital in mitigating carbon emissions and sustainable transition. However, the high investment cost and management requirements are the bottleneck of utilizing hybrid hydrogen-based systems in microgrids. Given the necessity of cost-effective and optimal design of these systems, the present study examines techno-economic feasibility of integrating hybrid hydrogen-based systems into an outdoor test facility. With this perspective, several solar-driven hybrid scenarios are introduced at two energy storage levels, namely the battery and hydrogen energy storage systems, including the high-pressure gaseous hydrogen and metal hydride storage tanks. Dynamic simulations are carried out to address subtle interactions in components of the hybrid system by establishing a TRNSYS model coupled to a Fortran code simulating the metal hydride storage system. The OpenStudio-EnergyPlus plugin is used to simulate the building load, validate against experimental data, according to the measured data and monitored operating conditions. Aimed at enabling efficient integration of energy storage systems, a techno-enviro-economic optimization algorithm is developed to simultaneously minimize the levelized cost of the electricity and maximize the CO2 mitigation in each proposed hybrid scenario. The results indicate that integrating the gaseous hydrogen and metal hydride storages into the photovoltaic-alone scenario enhances 22.6% and 14.4% of the annual renewable factor. Accordingly, the inclusion of battery system to these hybrid scenarios gives a 30.4% and 20.3 % boost to the renewable factor value, respectively. Although the inclusion of battery energy storage into the hybrid systems increases the renewable factor, the results imply that it reduces the hydrogen production rate via electrolysis. The optimized values of the levelized cost of electricity and CO2 emission for different scenarios vary in the range of 0.376–0.789 $/kWh and 6.57–9.75 ton, respectively. The multi-criteria optimizations improve the levelized cost of electricity and CO2 emission by up to 46.2% and 11.3%, with respect to their preliminary design.

Comparative study of controllers in battery energy storage system integrated with doubly fed induction generator-based wind energy conversion system for power quality improvement

This study presents a comparative analysis of controllers in a Battery Energy Storage System (BESS) integrated with a Doubly Fed Induction Generator (DFIG)-based Wind Energy Conversion System (WECS) aimed at improving power quality. The research background introduces the challenges associated with integrating renewable energy sources into the grid, emphasizing the intermittent nature of wind energy and its impact on power quality. Existing detailed problems, including voltage and frequency fluctuations, and grid instability, are outlined, highlighting the need for effective control strategies to mitigate these issues. The paper's contribution lies in evaluating and comparing different control techniques for BESS integration, including Proportional-Integral (PI) control, Fuzzy Logic (FL), and Artificial Neural Network (ANN) control. Through simulation studies conducted in MATLAB/Simulink, the effectiveness of each controller in regulating rotor current, rotor and stator power, voltage stability, state of charge (SoC) and grid synchronization is assessed. The findings provide valuable insights into the optimal controller selection for enhancing power quality in DFIG-based WECS with integrated energy storage systems, contributing to the advancement of renewable energy integration and grid stability.

Hybrid cheetah particle swarm optimization based optimal hierarchical control of multiple microgrids

The emergence of microgrids arises from the growing integration of Renewable Energy Resources (RES) and Energy Storage Systems (ESSs) into Distribution Networks (DNs). Effective integration, coordination, and control of Multiple Microgrids (MMGs) whereas navigating the complexities of energy transition within this context poses a significant challenge. The dynamic operation of MMGs is a challenge faced by the traditional distributed hierarchical control techniques. The application of Artificial Intelligence (AI) techniques is a promising way to improve the control and dynamic operation of MMGs in future smart DNs. In this paper, an innovative hybrid optimization technique that originates from Cheetah Optimization (CHO) and Particle Swarm Optimization (PSO) techniques is proposed, known as HYCHOPSO. Extensive benchmark testing validates HYCHOPSO’s superiority over CHO and PSO in terms of convergence performance. The objective for this hybridization stems from the complementary strengths of CHO and PSO. CHO demonstrates rapid convergence in local search spaces, while PSO excels in global exploration. By combining these techniques, the aim is to leverage their respective advantages and enhance the algorithm's overall performance in addressing complex optimization problems. The contribution of this paper offering a unique approach to addressing optimization challenges in microgrid systems. Through a comprehensive comparative study, HYCHOPSO is evaluated against various metaheuristic optimization approaches, demonstrating superior performance, particularly in optimizing the design parameters of Proportional-Integral (PI) controllers for hierarchical control systems within microgrids. This contribution expands the repertoire of available optimization methodologies and offers practical solutions to critical challenges in microgrid optimization, enhancing the efficiency, reliability, and sustainability of microgrid operations. HYCHOPSO achieves its optimal score within fewer than 50 iterations, unlike CHO, GWO, PSO, Hybrid-GWO-PSO, and SSIA-PSO, which stabilize after around 200 iterations. Across various benchmark functions, HYCHOPSO consistently demonstrates the lowest mean values, attains scores closer to the optimal values of the benchmark functions, underscoring its robust convergence capabilities.the proposed HYCHOPSO algorithm, paired with a PI controller for distributed hierarchical control, minimizes errors and enhances system reliability during dynamic MMG operations. Using HYCHOPSO framework, an accurate power sharing, voltage/frequency stability, seamless grid-to-island transition, and smooth resynchronization are achieved. This enhances the real application's reliability, flexibility, scalability and robustness.

Solution for Post-Mining Sites: Thermo-Economic Analysis of a Large-Scale Integrated Energy Storage System

The intensive development of renewable energy sources and the decreasing efficiency of conventional energy sources are reducing the flexibility of the electric power system. It becomes necessary to develop energy storage systems that allow reducing the differences between generation and energy demand. This article presents a multivariant analysis of an adiabatic compressed air energy storage system. The system uses a post-mining shaft as a reservoir of compressed air and also as a location for the development of a heat storage tank. Consideration was given to the length of the discharge stage, which directly affects the capital expenditure and operating schedule of the system. The basis for the analyses was the in-house numerical model, which takes into account the variability of air parameters during system operation. The numerical model also includes calculations of Thermal Energy Storage’s transient performance. The energy efficiency of the system operating on a daily cycle varies from 67.9% to 70.3%. Various mechanisms for economic support of energy storage systems were analyzed. The levelized cost of storage varies, depending on the variant, from 75.86 EUR/MWh for the most favorable case to 223.24 EUR/MWh for the least favorable case.

A novel multi-port high-gain bidirectional DC–DC converter for energy storage system integration with DC microgrids

Bidirectional converters have often been used in numerous applications like DC microgrids, renewable energy, hybrid energy storage systems, electric vehicles, etc. The paper proposes a novel multi-port high-gain (NMPHG) bidirectional DC–DC converter that supports DC microgrid (DC-MG) applications. The main contributions of the proposed converter are high step-up/step-down conversion gain, multiple input ports, lower switch voltage stress, and lower component count owing to the single converter with multiple input ports for DC microgrid applications. The detailed operational principle, analysis, and design considerations of proposed NMPHG bidirectional DC–DC converters are discussed. Furthermore, the loss analysis, detailed comparison with similar works, and efficiency analysis with non-modalities during forward power flow (LV to HV) and reverse power flow (HV to LV) modes are presented. The efficiency of the proposed converter is found to be 93.8% in forward power flow and 92.9% in reverse power flow modes at rated power. Finally, a hardware prototype of the proposed NMPHG bidirectional DC–DC converters is implemented with 100 W in FPF mode and 200 W in RPF mode with a TMS320F28335 processor and validated with theoretical counterparts.

Feasibility Study of Three-Phase Modular Converter for Dual-Purpose Application in DC and AC Microgrids

The modern concept of a universal converter is intended as a power converter suitable for application in both dc or ac grids using the same external connectors. This novel family was recently proposed to allow an easier integration of renewable energy sources and energy storage systems, interfacing with dc/ac grids and/or loads with a minimum redundancy of power switches and passive elements. This kind of solution and applications are expected to be a reality in the nearest decade, as ac and dc low voltage distribution networks will coexist. Nevertheless, the initial solutions proposed as universal converter were focused on ac single-phase power conversion systems. In this sense, this article proposes and describes a new member of the universal converter family suitable for dc to dc and dc to ac power conversion (both in three-phase three-wire and in three-phase four-wire). The proposed power topology is derived as a modular extension from the single buck-boost bidirectional cell. Its main operation modes (buck and boost) are discussed, and a pulse-width-modulation technique is developed to generate the corresponding switching patterns. The proposed solution is successfully validated in open-loop mode both in simulation and experimentally with a laboratory prototype. The measured efficiency of the power converter was above 97% in the dc to ac mode and around 99% in the dc to dc mode.

Optimal Operation and Market Integration of a Hybrid Farm with Green Hydrogen and Energy Storage: A Stochastic Approach Considering Wind and Electricity Price Uncertainties

In recent years, growing interest has emerged in investigating the integration of energy storage and green hydrogen production systems with renewable energy generators. These integrated systems address uncertainties related to renewable resource availability and electricity prices, mitigating profit loss caused by forecasting errors. This paper focuses on the operation of a hybrid farm (HF), combining an alkaline electrolyzer (AEL) and a battery energy storage system (BESS) with a wind turbine to form a comprehensive HF. The HF operates in both hydrogen and day-ahead electricity markets. A linear mathematical model is proposed to optimize energy management, considering electrolyzer operation at partial loads and accounting for degradation costs while maintaining a straightforward formulation for power system optimization. Day-ahead market scheduling and real-time operation are formulated as a progressive mixed-integer linear program (MILP), extended to address uncertainties in wind speed and electricity prices through a two-stage stochastic optimization model. A bootstrap sampling strategy is introduced to enhance the stochastic model’s performance using the same sampled data. Results demonstrate how the strategies outperform traditional Monte Carlo and deterministic approaches in handling uncertainties, increasing profits up to 4% per year. Additionally, a simulation framework has been developed for validating this approach and conducting different case studies.

Optimal configuration of energy storage system capacity in traction power supply system considering photovoltaic consumption

In order to achieve energy savings and promote on-site integration of photovoltaic energy in electrified railways, a topology structure is proposed for the integration of photovoltaic (PV) and the energy storage system (ESS) into the traction power supply system (TPSS) based on a railway power conditioner (RPC). This paper analyzes the composition and operation principles of this structure. To assess the economic benefits brought by the integration of photovoltaic and energy storage systems, a bilevel optimization model is established, with the objectives of optimizing energy storage capacity configuration and photovoltaic energy integration. The KKT (Karush–Kuhn–Tucker) method is employed to transform the model into a single-layer mixed-integer linear programming model, which is then solved using the CPLEX solver in MATLAB. The research findings indicate that, with the configuration of the ESS, the optimal PV consumption rate achieved is 96.8749%. Compared to a 100% PV consumption rate, the ESS capacity configuration is reduced by 13.14%, and the overall operational cost of the TPSS is at its lowest. The study suggests that the proposed bilevel optimization algorithm can more effectively consider PV consumption, leading to enhanced economic performance of the TPSS operation.

Effect of MXene Nanosheet Sticking on Supercapacitor Device Performance

Supercapacitors have garnered significant interest in recent years due to their high power density, rapid charge/discharge rates, and long cycle life. MXenes, a family of two-dimensional (2D) transition metal carbides/nitrides, have emerged as promising electrode materials for supercapacitors. However, one major challenge associated with incorporating MXenes in supercapacitor structures is the occurrence of sticking, wherein individual MXene flakes agglomerate, leading to reduced electrode performance. This review paper discusses various causes of sticking and approaches to preventing it, offering insights into the design and development of high-performance MXene-based supercapacitors. The morphology and size of MXene flakes, flake surface chemistry, thickness, surface area/volume ratio, electrode processing techniques (including solvent selection, additives incorporation, and deposition technology), and environmental factors were shown to be the basic factors resulting in sticking of MXene sheets. Among the strategies to mitigate this challenge, surface functionalization and passivation, integration with polymer matrices or carbon nanomaterials, and electrode processing optimization were considered. Possible paths for optimization and future directions of study, such as novel MXene compositions, understanding of interfaces and electrode–electrolyte interactions, development of advanced electrode architectures, and integration of energy storage systems, were assumed.

Fast Frequency Response for Future Low-Carbon Indian Power System: Challenges and Solutions

India has transitioned from being an energy-deficient nation to an energy-surplus nation. As of July 2023, India’s power system has seen a rapid transformation, with renewable energy, including large hydro, accounting for 40% of the total installed capacity at 177 GW. The ongoing energy transition has not only changed the country’s energy mix but also brought new challenges for system operators. The primary challenge is frequency instability due to the reduction of system inertia and governor-based primary frequency response (PFR) availability by large-scale integration of uncertain renewable energy resources (RES) such as wind and solar photovoltaic generators. Furthermore, the absence of frequency control ancillary services market, inadequate penetration of electric vehicles (EVs) and uncertainty of RES generation enhance the complexity of the frequency response services in the Indian power system. In this context, this paper presents a comprehensive review of the frequency response challenges of the future low-carbon Indian power system and underlines the new potential fast frequency response (FFR) services from advanced energy storage and renewable generation technologies. Such FFR services can be swiftly deployed in low-inertia grids through the integration of energy storage systems and inverter-based resources in a shorter span. Modeling of FFR services in security constraint unit commitment (SCUC) can enhance grid resiliency and facilitate high penetration of RES in the Indian power system without loss of frequency stability.

A Hybrid Energy Storage System Integrated with a Wave Energy Converter: Data-Driven Stochastic Power Management for Output Power Smoothing

Beyond solar and wind energy, wave energy is gaining great interest due to its very high theoretical potential, although its stochastic nature causes intermittent and fluctuating power production. Energy storage system (ESS) integration to wave energy converter (WEC) plants represents a promising solution to mitigate this issue. To overcome the technological limits of the single storage devices, the hybridization of complementary ESSs represents an effective solution, extending the operating range over different timeframes. This paper analyzes the benefits of Li-ion battery–supercapacitor hybrid ESS integration into a grid-connected WEC, aiming at smoothing the produced power oscillations. The hybridization concept involves coupling a power-intensive technology, such as a supercapacitor devoted to managing fluctuations at higher frequency, with a battery technology exploited to manage power variations over longer timeframes to mitigate degradation issues. In this study, a multi-objective data-driven power management strategy, based on the simultaneous perturbation stochastic approximation (SPSA) algorithm, is implemented to minimize power fluctuations in terms of power ramp (representing the power variation between two consecutive values with a 1 s time step), both at the Point of Common Coupling (PCC) and the Li-ion battery terminals, thanks to the supercapacitor peak-shaving function. The SPSA management strategy, together with a suitable sizing procedure, allows a reduction of more than 70% in the power oscillations at the PCC with respect to those at the WEC terminals, while decreasing battery stress by more than 25% if compared to a non-hybrid ESS consisting of a Li-ion battery. This shows how supercapacitor features can extend battery lifespan when integrated in a hybrid ESS.

Dual-level design for cost-effective sizing and power management of hybrid energy storage in photovoltaic systems

Integration of hybrid energy storage systems (HESS) into photovoltaic (PV) applications has been a hot topic due to their versatility. However, the proper allocation and power management schemes of HESS are challenges under diverse mission profiles. In this paper, a cost-effectiveness-oriented two-level scheme is proposed as a guideline for the PV-HESS system (i.e., PV, Li-ion battery and supercapacitor), to size the system configuration and extend battery lifespan while considering the power ramp-rate constraint. On the first level, a sizing methodology is proposed to balance the self-sufficiency and the energy throughput between the PV system and the grid to achieve the most cost-effectiveness. On the second level, an improved adaptive ramp-rate control strategy is implemented that dynamically distributes the power between the battery and supercapacitor to reduce the battery cycles. The case study presents the whole two-level design process in detail, and verifies the effectiveness of the proposed strategy, where the results show that the battery cycles are reduced by up to 13% over one year without affecting the self-sufficiency of the PV system.

Role of Renewables in Energy Storage Economic Viability in the Western Balkans

Given the growing shares of renewable energy sources in the grids, the interest in energy storage systems has increased. The role of pumped hydro energy storage systems as flexible solutions for managing peak and off-peak prices from nuclear and fossil power plants in previous systems is now revitalized in the liberalized systems, with a volatile generation of wind and solar energy. Thus, understanding of the patterns behind the economics of energy storage is crucial for the further integration of energy storage in the grids. In this paper, the factors that impact the economic viability of energy storage in electricity markets are analyzed. The method of approach used in this study considers the electricity market price distribution, full load hours, the total costs of energy storage, and linear regression analysis. Using revenues from arbitraging a 10-megawatt (MW) pumped hydro storage system in the Western Balkans, resulting from the electricity market price distribution and the analysis of the total costs of storage, an econometric model is created. This model shows the impacting factors of energy storage development in the context of the rising renewables sector. Research shows that the previous hypothesis about the integration of energy storage systems in proportion to the increase in shares of renewables in the grids is incorrect. There is a significant correlation between energy storage revenues, the dependent variable, and the independent variables of hydro, wind, and solar generation. The conducted analysis indicates the future arbitraging opportunities of pumped hydro energy storage systems and provides useful insights for energy storage investors and policymakers. During the transitional period, until the deployment of renewables changes the effects of fossil power plants, energy storage price arbitrage is profitable and desirable for 500, 1000, and 2000 full load hours in the Western Balkan region. Despite the need for flexibility, with more renewables in the grids, large-scale energy storage systems will not be economically viable in the long run because of “revenue cannibalization”.

Optimization of the Fast Frequency Regulation Strategy for Energy Storage-Assisted Photovoltaic Power Stations

Photovoltaic (PV) power generation is characterized by randomness and intermittency, resulting in unpredictable fluctuations in output power. This presents a significant challenge to the stable operation of the grid. To address this issue, the integration of energy storage systems provides a solution to mitigate the volatility of PV output, ensuring stability and precise control. In this study, we propose an ASS-Elman-based equivalent droop control strategy for PV power stations participating in grid frequency regulation. Furthermore, a joint PV-energy storage frequency regulation system is developed. For energy storage power stations actively engaged in grid frequency regulation, we employ an adaptive droop control strategy to enhance the traditional droop control method by incorporating additional frequency control strategies. We validate the effectiveness of the proposed strategies through simulation using MATLAB/SIMULINK. The results demonstrate that these strategies maximize the potential of energy storage and PV systems to comprehensively regulate frequency and significantly improve primary frequency regulation performance.

Design and performance evaluation of thermal energy storage system with hybrid heat sources integrated within a coal-fired power plant

The operational flexibility of coal-fired power plants (CFPPs) should be effectively enhanced to accommodate large-scale photovoltaic and wind power within the power grid. The integration of thermal energy storage (TES) systems is a potential way to enlarge the load-cycling range of CFPPs. To achieve high operational flexibility of CFPPs and high round-trip efficiency of TES systems, TES systems with hybrid heat sources including the heat converted from power by power-to-heat (P2H) devices and transferred from the reheat steam integrated into CFPP were proposed. Then, simulation and thermo-economic analysis models were developed, and the system design procedure was provided. Results show the minimum power load ratio is decreased from 30 % to about 16 % by storing heat from the reheat steam within the TES system, and then to zero by converting electricity to heat with P2H devices. The mode P-basic constitutes two double-tank molten salt TES systems, which are charged by the heat converted from power by P2H devices and the heat transferred from the reheat steam, respectively. It is discharged by releasing the heat to water/steam cycle of CFPP, and the highest equivalent round-trip efficiency of mode P-basic is up to 62.97 %. Moreover, mode P-basic exhibits the largest total cost of the equipment and storage materials at $58.26 million while it has the largest net present value at $103.79 million and the corresponding payback period is 5 years.