Intact Femur Research Articles

Risk of bony violation with standard triple screw configurations for fixation of femoral neck fractures: A preliminary computed tomography based analysis

PurposeThe reduction and fixation of femoral neck fractures is mainly an indirect one with intraoperative fluoroscopy being trusted for the safe containment of screws within the bony limits of the femoral neck. Radiologically undetected bony perforations may have an impact on the fracture stability and radiological outcomes that have not been studied previously. The purpose of this computed tomography (CT) based study is to analyze the safety of containment of triple screw configurations using standard 6.5 mm diameter screws for fixation of femoral neck fractures in the Indian population using a software-based analysis. MethodsData from consecutive CT scans with intact proximal femur performed over a six month period were retrospectively analyzed using iPlan® BrainLab AG, Feldkirchen, Germany. The safe containment of virtual screw trajectories placed in inverted triangular and non-inverted triangular configurations for a 6.5 mm diameter screw was analyzed in intact femoral necks. ResultsA total of 72 cases were considered for the final assessment. For 6.5 mm screws, the proportion for safe containment (without bony violation) of triple screw inverted triangular configuration was 75% with additional safety corridor to 1 mm around the screw trajectories and 31.94% for non-inverted triangular configuration. All male cases and 28% of female cases allowed safe placement of three 6.5 mm screw trajectories in an inverted triangular pattern with a safety margin of 1 mm around the screw. Replacement of one of the two superior 6.5 mm diameter screw trajectories with a 4.5 mm diameter trajectory resulted in 100% safe containment in female cases. ConclusionInverted triangular configuration is a relatively safer configuration compared to the non-inverted triangular configuration. Standard triple 6.5 mm screws for fixation of femoral neck fractures carry a risk of bony violation, especially in females. A preoperative radiographic assessment to screen the cases with narrow vertical and anteroposterior extents of the femoral neck can help in reducing the risk of fluoroscopically undetected violation of the bony margins. Replacement of one of the two superior screws with a 4.5 mm diameter screw can be helpful in such cases.

Primary stability of a cementless modular revision hip stem in relation with the femoral defect size: A biomechanical study.

Cementless modular fluted hip stems are commonly used in revision arthroplasty. Nevertheless, there is a wide spectrum of recommendations concerning the minimum bone stock required to enable osseous ingrowth and implant-bone micromotions <100 µm. This experimental study investigated the primary stability of a tapered cementless fluted revision stem depending on different types of bone defects. Implant-bone interface movements with a bimodular stem were examined under cyclic axial and torsional loading using composite femora. In four degrees of freedom, the implant subsidence and micromotions were captured with linear variable differential transformers for the intact femora and seven different defects ranging from Paprosky type I to type IIIB. With a 7-cm length of intact diaphysis proximal to the isthmus (Paprosky IIIA), mean implant-bone micromotions of 66 µm occurred. An implant-bone contact zone of only 5 cm (Paprosky IIIA) resulted in micromotions notably over 100 µm and significantly increased subsidence (p < 0.05). With a Paprosky IIIB defect (3 cm of intact diaphysis) rotational instability occurred in all specimens. Aside from critically increased interfacial micromotions (>100 µm), rotational instability emerged as a mechanism of fixation failure when the implant-bone contact zone was only 5 cm or less. Hence, future studies investigating the implant fixation in the case of femoral bone defects should consider both axial and torsional loading. With regard to the clinical application, our data suggest maintaining 7 cm of diaphyseal implant-bone contact for a safe anchorage of cementless fluted hip revision stems.

3D Imaging of Cleared Tissues

Tissue clearing technique enables visualization of opaque organ and tissue in 3‐dimension by turning tissue transparent. Current tissue clearing methods are restricted by limited types of tissue that can be cleared with each individual protocol, which inevitably led to the presence of blind‐spots within whole body or body parts imaging. Hard tissues including bones and teeth are still the most difficult organs to be cleared. In addition, endogenous fluorescence loss remains to be a major concern for solvent based clearing methods. Here, we developed a polyethylene glycol (PEG) Associated Solvent System (PEGASOS), which rendered nearly all types of tissue transparent and preserved endogenous fluorescence. Bones and teeth could be turned to nearly invisible after clearing. The PEGASOS method turned the whole adult mouse body transparent and we were able to image an adult mouse head composed of bones, teeth, brain, muscles and other tissues with no blind areas. Hard tissue transparency enabled us to reconstruct intact mandible, teeth, femur or knee joint in 3‐D. We were able to image intact mouse brain at sub‐cellular resolution and to trace individual neurons and axons over a long distance. We were able to visualize dorsal root ganglions directly through vertebrae. Finally, we revealed the neural network distribution pattern in 3‐dimension within the long bone marrow space. These results suggest that the PEGASOS method is a useful tool for general biomedical research.Support or Funding InformationThis work was supported by startup funding from Texas A&amp;M University, NIH/NIDCR grant K08DE025090, NIH/NIDCR grant R21 DE027928 and NIH/NIDCR grant R01 DE 028291 to Hu Zhao.Thy1‐EGFP spinal cord imaged with a tiling light sheet microscopeFigure 1

Development of an intraoperative 3D C-arm technique for torsion control of femur fractures: a cadaver study

This study aims to test the accuracy and feasibility of a measurement of femoral torsion of a 3D C-arm system (Linea aspera method) in a cadaver setting. A total of 11 intact femora were used. Schanz screws were inserted in the femoral bone in a parallel manner with the help of a fixed drill sleeve. Femur bones were then fractured in a controlled manner and three different internal and external torsion angles were fixed with the help of a Goniometer. After that, a 3D scan was performed. The 3D data set was analyzed using a radiologic software (Visage 7, Visage Imaging Inc, USA). Measurements were then compared in the two methods with a dependent t test. Specific measurements for different angles did not show any differences between those two utilities. Intraoperative estimation of femoral antetorsion using a 3D C-Arm system and the Linea aspera method seems to be an accurate and feasible method. Nevertheless, more studies with higher patient numbers, comparison to CT seems to be the next step and can be recommended.

Femoral Stress Changes after Total Hip Arthroplasty with the Ribbed Prosthesis: A Finite Element Analysis.

Background A total hip reconstruction is related to the stress distribution throughout the prosthesis, cement, and femur. Researches on reducing the stress in all components to minimize the risk of failure are of great significance. The objective of our study was to determine the biomechanical variation in overall femoral stress and periprosthetic femoral stress distribution after implantation with the Ribbed anatomic prosthesis. Methods Three-dimensional finite element models of intact femur and Ribbed prosthesis were developed according to the morphology, while the hip joint loading and the strength of related muscles were applied in the models. The overall stress changes of the intact femur before and after the implantation were analyzed, and the periprosthetic stress distribution especially in the proximal region of the femur was quantified. Results As a result, the overall stress pattern of the femur did not change after the implantation compared with the intact femur. The region of peak stress value was located in the middle and lower segments of the full length femur, but the stress value level decreased. The final prosthesis resulted in a significant decrease in the equivalent stress level of the periprosthetic bone tissue, and the most severe area appeared at the endmost posterior quadrant. The stress shielding ratio of the Ribbed prosthesis was 71.6%. The stress value level gradually increased towards the distal part of the prosthesis and recovered to physiological level at the end of the prosthesis. Conclusions The Ribbed prosthesis can cause significant stress shielding effect in the proximal femur. These results may help optimize prosthetic design to reduce stress shielding effect and improve clinical outcomes.

Assessing Femoral Rotation: A Survey Comparison of Techniques.

To compare 3 common techniques for assessing femoral malrotation through a response analysis. Ten intact human cadaveric pelvis-to-knee specimens were used to create a fracture model. A mobile C-arm x-ray system was used to capture images of an intact control femur and a contralateral test femur on each specimen. A midshaft femoral osteotomy was created on the test femur and it was then internally and externally rotated in 5-degree intervals up to 20 degrees. Images were obtained and stored at each increment of malrotation. Eight surveys of 20-paired images each were generated and presented for surgeon review. Accuracy of predicting femoral malrotation using the true lateral technique (TLT), neck horizontal angle (NHA) method, and lesser trochanter profile (LTP) was measured. Eighty-five surgeons completed a survey with 80 surgeons (94%) acknowledging the use of a described fluoroscopic method for assisting with rotational alignment. Surgeons correctly accepted a fracture rotated less than 20 degrees and rejected a fracture rotated 20 degrees or more 63% of the time. The ability to correctly identify 20 degrees of malrotation varied per technique used to assess rotation. With the LTP and NHA method, 67% of surgeons responded correctly. Surgeons performed significantly worse when using the TLT with only 53% providing correct responses (P < 0.0001). Surgeons using described fluoroscopic methods to identify acceptable rotation in femoral shaft fractures are correct 63% of the time. The LTP and NHA techniques are equally reliable and more effective than the TLT at detecting clinically significant femoral malrotation.

Macrophage subtype and cytokine expression characterization during the acute inflammatory phase of mouse bone fracture repair.

Fracture repair is a complex process requiring heterotypic interactions between osteogenic cells and immune cells. Recent evidence indicates that macrophages are critically involved in fracture repair. Polarized macrophage populations differentially promote and regulate inflammation in other tissues, but little is known about the various macrophage subtypes and their signaling activities following a bone fracture. The authors hypothesized that classically activated (M1 subtype) and alternatively activated (M2 subtype) macrophages are active during the early repair process to initiate and regulate the inflammatory response. To test our hypothesis, bone marrow was collected from intact femurs (naïve group), contralateral and fractured femurs of mice on days 0, 1, 2, 4, and 7 postfracture. Macrophages were isolated from the bone marrow and macrophage subtypes were identified using flow cytometry with antibodies to F4/80, MHC II, CD86, CD11c, and CD40. Bone marrow cytokine levels were measured using xMAP. Flow cytometry revealed dynamic changes in M1 subtype (F4/80+/MHC II+/CD86+), M2 subtype (F4/80+/MHC II-/CD86-), and dendritic cell (DCs; MHCII+/CD11c+/CD40+) populations following fracture as compared to naïve controls. M1 subtype levels were correlated with IL-1α, IL-1ß, IL-2, IL-17, Eotaxin, and MCP-1, while DCs were correlated with IL-6, G-CSF, LIF, KC, and VEGF-A. The results indicate that M1 and M2 subtypes and DCs are recruited to the fracture site early during the repair process and consequently may work in tandem to regulate the inflammatory response required to recruit osteogenic cells needed for later stages of repair.

A Validated Finite Element Model of Intertrochanteric Fractures with Inhomogeneous Material Properties Extracted From CT Images

Abstract Currently available finite element (FE) models of intertrochanteric fractures cannot accurately represent the real material properties of femurs. This paper aimed to create and validate an FE model of intertrochanteric fractures with inhomogeneous material properties assigned from CT images by a node-based approach. The geometry of a femur was automatically generated from its CT images. The density and Young’s modulus were assigned to the FE model via an in-house program. The fractured femur was fixed with a dynamic hip screw (DHS) system. The resonant frequencies of the intact femur were calculated by finite element analyses (FEA) and then compared with the existing experimental results. The strains at the femoral neck and the lesser trochanter and the reaction forces under compression were also investigated by the finite element analysis. These simulation results were validated by in vitro experimental tests. In addition, the FE model with homogeneous material properties was used for comparison. Relative error analyses showed that the FE predictions matched the experimental results very well (as the errors of all the four indexes were lower than 10%), which meant that the node-based inhomogeneous material model was accurate and that the FE model could be used to investigate the intertrochanteric fractures.

Fabrication of Low-Cost Hip Implant using Direct Metal Laser Sintering Technique

Total hip replacement (THR) is the most popular surgery been performed in orthopedic surgery due to the inclination of musculoskeletal disorder and the aging population worldwide. However, the implant’s cost-burdened the patient, especially in the ASEAN region. The main objective of this study was to fabricate the low-cost hip implant using direct laser metal sintering (DMLS). The framework starts with the three dimensional of hip anthropometric datasets from computed tomography scanner, followed with the design of hip implant, computational analysis using finite element, and finally fabrication using DMLS technique. The morphological results demonstrated the value of neck-shaft angle was 130.46º, and the femoral head offset of 30.35 mm. The finite element analysis showed strain distribution was 65 MPa for the implant in metaphyseal region and 110 MPa for intact femur under staircase physiological loading which indicated inhibition of stress shielding at medical calcar region, and micromotion was 4.8 μm which prevent the formation of fibrous tissue and promoting osseointegration between implant-bone interfaces. This study proposed the fabrication using the DMLS technique, which produced accurate implant with low-cost, which suits the ASEAN hip morphology that prolongs implant lifetime.

Length Matters: Short Base-Plate Angle Guides May Lead to Guide-Wire Mal-Positioning When Inserting a DHS. A Radiographic Modeling Study.

The dynamic hip screw (DHS) consists of a barrel-plate fixed to the relatively-straight proximal femoral shaft, and a screw which slides within the barrel at a fixed angle, usually 135°. The guide-wire is inserted using a guide at the set angle. Guide design varies between manufacturers, with some new guides being particularly short. We analysed the impact of guide design on the resulting trajectory of the guidewire, and its potential to cause a surgical error. Twenty AP hip radiographs were analysed. Trauma Cad (Brainlab, Munich, Germany) software was used to template a 4-hole 135° DHS onto the intact femur with the screw positioned in the center of the head. A template of a Stryker (Michigan, USA) 135° DHS guide (37 mm long) was then overlaid at the hip screw entry point, and the set trajectory marked. The divergence between the two trajectories was measured (α angle). The distance the guide would have to be moved inferiorly to attainthe correct position in the head was then noted. The median divergence (α angle) caused by the guide relative to the ideal position was 6° (range 2-12). This led to the guidewire placement being a median of 9.1 mm (range 3-23) superior in the head (β).To achieve the correct position of the wire in the head, the guide needed to be moved inferiorly a median of 8 mm (range 2-10). © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 38:574-577, 2020.

First report of Heleomyzidae (Diptera) recovered from the inner cavity of an intact human femur

One of the main characteristics of the Mafia of Gargano is their use of ritual murders: they shoot their victims in the face and then conceal the corpses in the numerous natural ravines present in the Gargano area. Skeletal remains are often recovered in a poor state of preservation under particular conditions related to the environmental situation. Humidity, temperature and environmental contaminants could be considered very important for forensic examinations and are strictly related to the bone preservation status. One of the most important analyses is the identification of the victim: the success rate is linked to the condition of the bones.During military investigations in the Gargano area, several bones were recovered and analyzed in a karst ravine about 30 m deep. The forensic examination highlighted the presence of fly puparia from an intact human femur. The colonization of the inner bone cavity by a species of the Heleomyzidae family is described for the first time. Puparia, despite not being identified at the species level, are described and illustrated and their potential role in the degradation of the victim's DNA is discussed. This work increases our knowledge about the effects of Diptera in the taphonomic process underlying the need of a multidisciplinary approach to skeletal investigations.

Blockade of the OGF-OGFr pathway in diabetic bone

ABSTRACTPurpose: This research investigated the presence and integrity of the opioid growth factor (OGF)—opioid growth factor receptor (OGFr) regulatory pathway in type 1 diabetic (T1D) rats, and investigated whether modulation of this axis by naltrexone (NTX) altered the composition of normal bone or fractured femurs.Materials and Methods: Diabetes was induced by streptozotocin; controls rats received buffer. Hyperglycemic animals were subjected to femur osteotomy, with randomized cohorts receiving either topical NTX or sterile saline in calcium carbonate. In experiment 2, hyperglycemic rats were injected daily for 3 weeks with either 30 mg/kg NTX or sterile saline. Expression levels of OGF and OGFr were measured by immunohistochemistry, bone composition was assessed by histomorphometry, and bone integrity was evaluated by µCT and 3-point bending.Results: Relative to normoglycemic bones, OGF and OGFr expression levels were increased 95% and 84%, respectively, in T1D bone; serum levels of OGF in T1D rats were elevated 23%. Hyperglycemia decreased the strength (26%), osteocalcin expression (17%), and number of proliferative (Ki67+) cells (32%) in intact femur. Topical NTX treatment of fractured femurs reduced the percentage of granulation tissue and increased cartilage. Systemic NTX treatment of diabetic rats increased strength by 21% and energy absorbed by105% in bone relative to measurements in saline-treated diabetic rats.Conclusions: The OGF-OGFr pathway appears to be dysregulated in the bone of T1D rats. Topical NTX treatment of T1D fractured bone accelerated some aspects of delayed diabetic fracture repair, and systemic NTX protected against some elements of compromised bone composition.

Predictions of Birmingham hip resurfacing implant offset - In vitro and numerical models

The number of hip resurfacing arthroplasty procedures has declined dramatically in recent years, for reasons related to the survival rate. Some studies suggest that metal particles are the main critical problem, but do not specify the effect of femoral position on the failure rate. The present study aims to analyze whether the positioning of the resurfacing head implant is important in the distribution of bone strains and in the risk of fracture of the femur.Three in vitro experimental models received the Birmingham hip resurfacing implant to replicate the total hip joint. The resurfacing head of the implanted models was placed in three different offset positions: in a positive offset, with the same femoral head center and in a negative offset.The numerical models were validated by correlating numerical and experimental results. Comparing experimental results from the implanted and intact femurs highlights a strain increase of up to 48% in the proximal medial femur region for positive offset and up to 18% in the neutral position. A reduction of 72% for negative offset (valgus position) was also measured experimentally.A significant change in strain distributions was observed with a resurfacing hip system and increased risk of neck fracture was found using the resurfacing head in positive offset. The iliac bone presents a high decrease in strains that will induce bone loss in the long term. Among the offset positions tested, results suggest that the negative offset (valgus position) and the natural position are the best equilibrated for better long-term results.

Biomechanical and finite element study of drilling sites for benign lesions in femoral head and neck with curettage, bone-grafting and internal fixation.

Objective: To evaluate the influence of drilling sites for benign lesions in femoral head and neck with curettage, bone-grafting and internal fixation. Methods: Twelve paired formalin-fixed human cadaveric femora were grouped randomly into 2 groups of 6 pairs each, which were group 1 and group 2, and one of each pair of femora was grouped randomly to drill an oval-shaped hole in the anterior femoral neck, and the contralateral femur was assigned to drill an oval-shaped hole in the lateral of the proximal femur. Group 1 femora were simulated the operation of curettage, bone-grafting and internal fixation, and group 2 femora were simulated the operation of curettage. Besides, finite element models corresponding to mechanical testing were simulated according to one of the twelve femora, then finite element analysis were done. Wilcoxon signed-rank test was used for statistical analysis, with a p value < 0.05 indicating statistical significance. Results: The simulated operation of curettage decreased the axial stiffness and torsional stiffness of the intact proximal femur significantly, while there was no statistical difference on the degree of the decline between different drilling sites. Although the simulated operation of bone-grafting and internal fixation in different drilling sites increased the axial stiffness and torsional stiffness, only in the case of implanting bones and internal fixation for the lateral cortical drilled hole increased the axial stiffness greatly and made a statistical difference, even more stiff than the intact proximal femur model. Conclusion: Compared with drilling in the anterior femoral neck, a bigger stability could be obtained after drilling in the lateral proximal femur for benign lesions in femoral head and neck with curettage, bone-grafting and internal fixation.

Activation of hedgehog signaling by systemic agonist improves fracture healing in aged mice.

Fracture healing is a complex process of many coordinated biological pathways. This system can go awry resulting in nonunion, which leads to significant patient morbidity. The Hedgehog (Hh) signaling pathway is upregulated in fracture healing. We hypothesized that the Hh signaling pathway can be pharmacologically modulated to positively affect fracture healing. Diaphyseal femur fractures were created in elderly mice (18 months, C57BL/6 females), which have a blunted and delayed healing response compared to younger mice, and were stabilized with intramedullary pins. To activate the Hh pathway we targeted the receptor Smoothened using an agonist (Hh-Ag1.5 [Hh-Ag]) and compared this to a vehicle control. Expression of Hh target genes were significantly increased in the fracture callus of the agonist group compared to controls, indicating pathway activation. Expression of osteogenic and chondrogenic-related genes was greatly upregulated in fracture callus versus intact femora, although Hh agonist treatment did not consistently enhance this response. Blindly graded, radiographic callus healing scores were significantly higher in the Hh-Ag groups at post operative day (POD) 14, indicating earlier callus bridging. On microCT, Hh-Ag treatment led to greater callus volume (+40%) and bone volume (+25%) at POD21. By day 14, callus vascularity, as assessed by 3D microCT angiography vessel volume, was 85% greater in the Hh-Ag group. Finally, mechanical strength of the calluses in the Hh-Ag groups was significantly greater than in the control groups at POD21. In conclusion, systemic administration of a Hh agonist appears to improve the osseous and vascular healing responses in a mouse fracture healing-impaired model. © 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res.

Experimental Validation of the Radiographic Union Score for Tibial Fractures (RUST) Using Micro-Computed Tomography Scanning and Biomechanical Testing in an in-Vivo Rat Model

The Radiographic Union Score for Tibial fractures (RUST) and the modified version of the system, mRUST, are popular standards for assessing fracture-healing progress with use of radiographs. To our knowledge, this is the first study to experimentally validate the ability of RUST and mRUST to accurately assess bone-healing progression with use of both micro-computed tomography (micro-CT) scanning and biomechanical testing. Adult male rats (n = 29) underwent osteotomy with a midshaft fracture gap repaired with use of a polyetheretherketone plate. Anteroposterior and lateral radiographs were made of the repaired femora prior to rat death at end points of 5, 6, 7, 8, 9, and 17 weeks, and 2 fellowship-trained orthopaedic trauma surgeons independently assigned RUST and mRUST scores to repaired femora. The repaired and intact contralateral femora were then dissected. Bones underwent dissection, micro-CT scanning, and biomechanical torsion testing at the end points. RUST scores ranged from 5 to 12 and mRUST scores ranged from 5 to 16. Intraclass correlation coefficients (ICCs) were 0.89 (95% confidence interval [CI]: 0.78 to 0.94) for RUST and 0.86 (95% CI: 0.74 to 0.93) for mRUST, which fall within the "almost perfect agreement" category for ICCs. Spearman rank correlation coefficients (RS) showed correlation of RUST (RS range, 0.456 to 0.818) and mRUST (RS range, 0.519 to 0.862) with micro-CT measurements of mineralized callus volume (BV), total callus volume (TV), and BV/TV ratio, but less so with bone mineral density (BMD). Additionally, RUST (RS range, 0.524 to 0.863) and mRUST (RS range, 0.434 to 0.850) were correlated with some biomechanical properties. A RUST score of 10 or an mRUST score of 15 may be considered the threshold above which a plated bone is "healed" because, at these scores, 120% or 140% of failure torque, respectively, was achieved by the repaired femora as compared with the intact contralateral femora. RUST and mRUST both show strong statistical correlations with micro-CT and biomechanical parameters. RUST and mRUST scoring systems provide clinicians with validated, reliable, and available tools to assess the progress of fracture-healing.

Biomechanical Analysis Using FEA and Experiments of Metal Plate and Bone Strut Repair of a Femur Midshaft Segmental Defect.

This investigation assessed the biomechanical performance of the metal plate and bone strut technique for fixing recalcitrant nonunions of femur midshaft segmental defects, which has not been systematically done before. A finite element (FE) model was developed and then validated by experiments with the femur in 15 deg of adduction at a subclinical hip force of 1 kN. Then, FE analysis was done with the femur in 15 deg of adduction at a hip force of 3 kN representing about 4 x body weight for a 75 kg person to examine clinically relevant cases, such as an intact femur plus 8 different combinations of a lateral metal plate of fixed length, a medial bone strut of varying length, and varying numbers and locations of screws to secure the plate and strut around a midshaft defect. Using the traditional “high stiffness” femur-implant construct criterion, the repair technique using both a lateral plate and a medial strut fixed with the maximum possible number of screws would be the most desirable since it had the highest stiffness (1948 N/mm); moreover, this produced a peak femur cortical Von Mises stress (92 MPa) which was below the ultimate tensile strength of cortical bone. Conversely, using the more modern “low stiffness” femur-implant construct criterion, the repair technique using only a lateral plate but no medial strut provided the lowest stiffness (606 N/mm), which could potentially permit more in-line interfragmentary motion (i.e., perpendicular to the fracture gap, but in the direction of the femur shaft long axis) to enhance callus formation for secondary-type fracture healing; however, this also generated a peak femur cortical Von Mises stress (171 MPa) which was above the ultimate tensile strength of cortical bone.

Are piriformis reconstruction implants ideal for prophylactic femoral neck fixation?

ObjectivesProphylactic femoral neck fixation may be performed in the setting of geriatric diaphyseal femur fracture, pathologic or impending atypical femur fractures. Fixation constructs often utilize cephalomedullary implants with one or two proximal interlocking screws into the femoral head/neck. Variations in proximal femoral anatomy and implant design can interfere with the placement of two screws in the femoral head and neck. Our objective was to assess the strength of piriformis entry reconstruction implants with one versus two proximal interlock screws for prophylactic femoral neck fixation. MethodsThirty fourth generation synthetic femur models were separated into 5 groups. The control group was an intact femur, and the second group was an intact femur with an entry hole in the piriformis fossa. The remaining groups had an intramedullary nail placed with either 0, 1, or 2 screws placed into the femoral head and neck. Each femur was mechanically loaded along the mechanical axis through the femoral head. Load to failure and failure displacement were recorded. ResultsMean load to failure was 5583 ± 543 N in the intact femur. Constructs with 2 screws had a significantly higher mean load to failure (3223 ± 474 N) compared to one screw constructs (2368 ± 280 N). All of the experimental groups remained significantly lower than the intact femur model (p < 0.05). ConclusionOur results demonstrate that piriformis entry reconstruction implants have a significantly lower load to failure compared to an intact femur irrespective of screw construct. Further studies are needed to investigate this potential iatrogenic weakening.

Changes in ephrin gene expression during bone healing identify a restricted repertoire of ephrinsmediating fracture repair.

To identify the repertoire of ephrin genes that might regulate endochondral bone fracture repair, we examined changes in ephrin ligand and receptor (Eph) gene expression in fracture callus tissues during bone fracture healing. Ephrin and Eph proteins were then localized in the fracture callus tissues present when changes in gene expression were observed. Ephrin gene expression was widespread in fracture tissues, but the repertoire of ephrin genes with significant changes in expression that might suggest a regulatory role in fracture callus development was restricted to the ephrin A family members Epha4, Epha5 and the ephrin B family member Efnb1. After 3 weeks of healing, Epha4 fracture expression was downregulated from 1.3- to 0.8-fold and Epha5 fracture expression was upregulated from 1.2- to 1.5-fold of intact contralateral femur expression, respectively. Efnb1 expression was downregulated from 1.5- to 1.2-fold after 2 weeks post-fracture. These ephrin proteins were localized to fracture callus prehypertrophic chondrocytes and osteoblasts, as well as to the periosteum and fibrous tissues. The observed positive correlation between mRNA levels of EfnB1 with Col10 and Epha5 with Bglap, together with colocalized expression with their respective proteins, suggest that EfnB1 is a positive mediator of prehypertrophic chondrocyte development and that Epha5 contributes to osteoblast-mediated mineralization of fracture callus. In contrast, mRNA levels of Epha4 and Efnb1 correlated negatively with Bglap, thus suggesting a negative role for these two ephrin family members in mature osteoblast functions. Given the number of family members and widespread expression of the ephrins, a characterization of changes in ephrin gene expression provides a basis for identifying ephrin family members that might regulate the molecular pathways of bone fracture repair. This approach suggests that a highly restricted repertoire of ephrins, EfnB1 and EphA5, are the major mediators of fracture callus cartilage hypertrophy and ossification, respectively, and proposes candidates for additional functional study and eventual therapeutic application.

Intraoperative Evaluation of the Anatomic Lateral Distal Femoral Angle and Its Variation due to Positioning.

Preoperative evaluation of the contralateral anatomic lateral distal femoral angle (aLDFA) at our institution is used to judge coronal plane alignment. In our study, we investigated 4 different techniques for obtaining an anteroposterior intraoperative fluoroscopic image of the distal femur to determine which technique provides (1) the greatest interobserver reliability; (2) the lowest variability from the previously published population mean; and (3) the lowest side-to-side variability. Inclusion criteria included lower extremity injuries needing fixation that required intraoperative fluoroscopy with an intact femur and an intact extensor mechanism (N = 100). Fluoroscopic images were obtained of the distal femur in 4 positions differentiated by the position of the limb and the orientation of the C-arm beam to the femoral shaft. All measurement techniques resulted in mean measurements within one degree of 81 degrees. Variance between measurements was small among patients with all views, but images that involved a true anteroposterior with the beam perpendicular to the femur had the lowest rate of measurements that were <78 or >84 degrees. Side-to-side differences in patients were <2 degrees on average with every image used. With the best-performing images, 20% of patients had an aLDFA > 3 degrees different from the population mean of 81 degrees and 3% of patients were >5 degrees different. Although restoring aLDFA to 81 degrees will be within 3 degrees of the contralateral side the vast majority of the time, matching the aLDFA to the injured side will be the most accurate reconstruction.