Instrumentation System Research Articles

SENSITIVITY AND SPECIFICITY OF A NEW TOOL FOR EARLY DETECTION OF RISK FACTORS FOR NON COMMUNICABLE DISEASES IN URBAN WORKERS

Introduction: Non communicable diseases (NCDs) have an impact on health, economy, and quality of life, and can reduce worker productivity. Approximately 41 million people die from NCDs every year, accounting for 74% of deaths worldwide. The Deteksi Dini Faktor Risiko Gizi dan Kesehatan (DDR-GizKes) is instrument designed for the early detection of nutritional and health risk factors related to NCDs that affect the productivity of urban workers . A screening test is essential part of this newly developed tool. Aims: This study aims to test the sensitivity and specificity of the DDR-GizKes instrument for detecting NCDs in urban workers. Methods: This study used a descriptive observational design with a cross-sectional approach. The population consisted of 227 teachers and staff in high schools in Yogyakarta who were selected using a cluster random sampling technique. Hypertension was used as the gold standard for the screening test. Results: The nutritional risk factor test had a sensitivity of 15.8% and a specificity of 94.2%. The positive predictive value (PPV) for the nutritional risk factor was 16.7% and the negative predictive value (NPV) was 93.8%. Meanwhile, the health risk factor test had a sensitivity of 15.8% and a specificity of 86.4%. The PPV for the health risk factor was 7.89% and the NPV was 93.3%. Conclusion: The DDR-GizKes instrument had low sensitivity but high specificity. Further research is necessary to establish the scoring system of the DDR-GizKes instrument in populations with a high prevalence of NCDs using a larger sample size.

Verification and validation optimization method for signal quality bits in digital control system application software of nuclear power plant

Abstract The digitalization enhances nuclear power plant (NPP) instrumentation and control (I&C) system performance, while simultaneously introducing safety and reliability challenges. To enhance the stability of distributed control system (DCS), and minimize the dangerous failure rate and safe failure rate of safety system, signal quality bits (SQBs) are widely used in NPP DCS to identify the validity of important signals. However, in the past decade or so, numerous unscheduled turbine shutdowns and/or reactor trips have resulted from incorrect SQB design or settings. Therefore, it is necessary to conduct optimization research on the design methods and setting principles of SQBs, establish an optimization method for DCS application software SQB verification and validation (V&V), then minimize DCS faults attributed to SQB. With the aim, this work conducts an in-depth investigation and analysis of the definition, design, setting and transmission of SQB in NPP. A specific optimization method for software V&V to conduct SQB on NPP safety DCS application software is proposed. Twelve concerns in the SQB V&V work are detailed. The reactor trip system ΔT protection logic is utilized as a case to illustrate the detail implementation process of this optimization method. This work provides an engineering technical reference and operational guidance for SQB software V&V, conducive to ensuring the safe and economical operation of NPPs.

Digitalization of Pulse Signal Processing for Ex-Core Instrumentation System in Nuclear Power Plants

Nuclear power plants (NPPs) are globally important sources of clean energy. However, high operation and maintenance (O&M) costs are one of the factors hindering the development of NPPs. In this study, we focused on the development of a digital algorithm for ex-core instrumentation systems (EISs) to reduce O&M costs, given that the digitalization of EISs is not progressing compared with other instrumentation and control systems in NPPs. Specifically, we developed a digital algorithm for pulse signal processing in EISs, which traditionally require a significant amount of hardware and maintenance efforts. Our purposes were to simplify the configuration and reduce the O&M costs associated with pulse signal processing. To validate the algorithm, we used a detector emulator and a research reactor. Additionally, we explored a new approach to reduce the workload associated with a discrimination characteristics test (DCT) in EISs. The results of this study demonstrated that the proposed algorithm is effective in achieving good linearity within ±5% of the span and response performance with a delay time of 5 ms, which are required for EISs. Furthermore, the proposed method for the DCT shows promising results in reducing the time required for the test compared with conventional methods.

Back to basics

Modern day practitioners are spoilt for options when it comes to instrumentation, practice gadgets and IT systems. For practitioners past, the approach was somewhat more basic. John Dixon Salt describes the challenges and resourcefulness of early 20th century practitioners

Passive Biotelemetric Detection of Tibial Debonding in Wireless Battery-Free Smart Knee Implants.

Aseptic loosening is the dominant failure mechanism in contemporary knee replacement surgery, but diagnostic techniques are poorly sensitive to the early stages of loosening and poorly specific in delineating aseptic cases from infections. Smart implants have been proposed as a solution, but incorporating components for sensing, powering, processing, and communication increases device cost, size, and risk; hence, minimising onboard instrumentation is desirable. In this study, two wireless, battery-free smart implants were developed that used passive biotelemetry to measure fixation at the implant-cement interface of the tibial components. The sensing system comprised of a piezoelectric transducer and coil, with the transducer affixed to the superior surface of the tibial trays of both partial (PKR) and total knee replacement (TKR) systems. Fixation was measured via pulse-echo responses elicited via a three-coil inductive link. The instrumented systems could detect loss of fixation when the implants were partially debonded (+7.1% PKA, +32.6% TKA, both p < 0.001) and fully debonded in situ (+6.3% PKA, +32.5% TKA, both p < 0.001). Measurements were robust to variations in positioning of the external reader, soft tissue, and the femoral component. With low cost and small form factor, the smart implant concept could be adopted for clinical use, particularly for generating an understanding of uncertain aseptic loosening mechanisms.

Experimental and numerical approach to assess the dynamic performance of an inductive ignition system

This paper envisages studying the features of a conventional inductive ignition system along with its MOSFET and IGBT-based transistorized modifications. The influence of mechanical contact breaker dynamics and ignition coil characteristics on the current and voltage waveforms of the primary and secondary circuits of these studied ignition systems are mathematically and experimentally exposed. The investigation is considered necessary prior to attempting subsequent modeling and diagnostics procedures on the current-voltage performance characteristics of conventional and transistorized ignition systems. The work has demanded the development of an experimental setup based on a basic modifiable ignition system mockup and an instrumentation system to measure and analyze the voltage-current parameters of inductive ignition systems. The paper describes the design details of such instrumentation system, presents mechanical and electrical models for contact breaker and ignition circuits, then simulated to obtain base free-run response waveforms and electrical continuity behavior of the contact. A test of frequency response of the ignition coil provided additional input to the model. An experimental test of continuity of the contact, in agreement with its model, shed light on the actual excitation of the primary coil. The work comments on a sample of the registered current and voltage waveforms in primary and secondary coil windings of the ignition system at atmospheric conditions. Comparisons of waveforms and energy for mechanical contact, MOSFET and IGBT switches are made to establish them as a reference for future tests.

Reliability and Performance Evaluation of Safety-Critical Instrumentation and Control Systems of Nuclear Power Plant

Instrumentation and control systems are nervous systems of nuclear power plant (NPP). These systems interact with several safety-critical components of the NPP, such as actuators, transformers, control valves, sensors, circuit breakers, signal processing units, controllers, and heat exchangers. Therefore, the failure of these systems could result in significant financial loss, harm to human resources, or environmental damage. As a result, these systems need to be highly reliable and accurate. In this article, we suggest a framework, based on the batch deterministic and stochastic Petri nets (BDSPNs) to measure the reliability and performance of safety-critical system. The framework consists of three phases. In the first phase, the system is modeled using the BDSPN to derive the transition rate among the system states. In phase 2, the transition rate matrix is utilized to compute the steady-state probability values, which help to evaluate the response time of the system using Little's law. The third phase uses a transition probability matrix to assess the reliability of the system. The technique is illustrated on shutdown system of NPP and is validated on the operational profile data. The obtained accuracy of 99.9905% in measurement of reliability validates the approach.

Adolescents flexibly adapt action selection based on controllability inferences.

From early in life, we encounter both controllable environments, in which our actions can causally influence the reward outcomes we experience, and uncontrollable environments, in which they cannot. Environmental controllability is theoretically proposed to organize our behavior. In controllable contexts, we can learn to proactively select instrumental actions that bring about desired outcomes. In uncontrollable environments, Pavlovian learning enables hard-wired, reflexive reactions to anticipated, motivationally salient events, providing "default" behavioral responses. Previous studies characterizing the balance between Pavlovian and instrumental learning systems across development have yielded divergent findings, with some studies observing heightened expression of Pavlovian learning during adolescence and others observing a reduced influence of Pavlovian learning during this developmental stage. In this study, we aimed to investigate whether a theoretical model of controllability-dependent arbitration between learning systems might explain these seemingly divergent findings in the developmental literature, with the specific hypothesis that adolescents' action selection might be particularly sensitive to environmental controllability. To test this hypothesis, 90 participants, aged 8-27, performed a probabilistic-learning task that enables estimation of Pavlovian influence on instrumental learning, across both controllable and uncontrollable conditions. We fit participants' data with a reinforcement-learning model in which controllability inferences adaptively modulate the dominance of Pavlovian versus instrumental control. Relative to children and adults, adolescents exhibited greater flexibility in calibrating the expression of Pavlovian bias to the degree of environmental controllability. These findings suggest that sensitivity to environmental reward statistics that organize motivated behavior may be heightened during adolescence.

Implementation of a laser-neutron pump-probe capability for inelastic neutron scattering.

Knowledge about nonequilibrium dynamics in spin systems is of great importance to both fundamental science and technological applications. Inelastic neutron scattering (INS) is an indispensable tool to study spin excitations in complex magnetic materials. However, conventional INS spectrometers currently only perform steady-state measurements and probe averaged properties over many collision events between spin excitations in thermodynamic equilibrium, while the exact picture of re-equilibration of these excitations remains unknown. In this paper, we report on the design and implementation of a time-resolved laser-neutron pump-probe capability at hybrid spectrometer (beamline 14-B) at the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory. This capability allows us to excite out-of-equilibrium magnons with a nanosecond pulsed laser source and probe the resulting dynamics using INS. Here, we discussed technical aspects to implement such a capability in a neutron beamline, including choices of suitable neutron instrumentation and material systems, laser excitation scheme, experimental configurations, and relevant firmware and software development to allow for time-synchronized pump-probe measurements. We demonstrated that the laser-induced nonequilibrium structure factor is able to be resolved by INS in a quantum magnet. The method developed in this work will provide SNS with advanced capabilities for performing out-of-equilibrium measurements, opening up an entirely new research direction to study out-of-equilibrium phenomena using neutrons.

Expotecnología 2022

Expotecnología 2022 was an event that took place in the city of Cartagena de Indias, from November 2 to 6, 2022, with the slogan “The future of engineering in the face of technological disruption” This eighteenth version was a meeting that brought together the scientific and academic community in spaces for the dissemination and transfer of knowledge, where innovation was the essence and a fundamental part of the event. Expotecnología was created in the Faculty of Engineering Sciences - FACI, of the Antonio de Arévalo University Foundation - UNITECNAR and in this version it maintained as mission, the development of the interaction between science, technology and society, through establishing of knowledge networks and academic and professional cooperation. The main objective was to address the challenges that emerge from the everyday life of the engineering community, the problems immersed in the development of projects and programs of Higher Education Institutions (IES), organizations and research centers at the national and international level. In the development of the day of presentations in a virtual way, it was possible to promote the dissemination of the research work of professionals, teachers and students from all areas of engineering, framed in four (4) thematic axes, as follows:• New technologies: Big data, Artificial Intelligence, Business Intelligence, Software Engineering, Education and new technologies and Mobile Applications.• Petrochemicals and process control: Materials Science, Instrumentation and Control Systems, Robotics and Automation and Industrial Maintenance.• Electricity, electronics and telecommunications: IoT, Fiber optics, Digital Signal Processing, Wireless Networks, Mobile Communications, Power Systems, Energy Storage, Smart Grids, Renewable Energies, Operation and Distribution, Energy Dispatch, Energy Markets• Construction Summit: Modern Building Systems and Computational Modeling.On this occasion, the event was attended by 512 people, representatives from 25 national and 6 international universities. 32 presentations were made, of which 32 articles were selected for this volume of the IOP Conference Cycle: Materials Science and Engineering and 13 articles for the book Engineering, Innovation and the fourth industrial revolution., After a process of Peer Review. The plenary conferences were in charge of 2 national and 8 international speakers .List of Invited speakers, Organizing Committee, Special thanks are available in this pdf.

The CMS Fast Beam Condition Monitor for HL-LHC

The high-luminosity upgrade of the LHC brings unprecedented requirements for real-time and precision bunch-by-bunch online luminosity measurement and beam-induced background monitoring. A key component of the CMS Beam Radiation, Instrumentation and Luminosity system is a stand-alone luminometer, the Fast Beam Condition Monitor (FBCM), which is fully independent from the CMS central trigger and data acquisition services and able to operate at all times with a triggerless readout. FBCM utilizes a dedicated front-end application-specific integrated circuit (ASIC) to amplify the signals from CO2-cooled silicon-pad sensors with a timing resolution of a few nanoseconds, which enables the measurement of the beam-induced background. FBCM uses a modular design with two half-disks of twelve modules at each end of CMS, with four service modules placed close to the outer edge to reduce radiation-induced aging. The electronics system design adapts several components from the CMS Tracker for power, control and read-out functionalities. The dedicated FBCM23 ASIC contains six channels and adjustable shaping time to optimize the noise with regards to sensor leakage current. Each ASIC channel outputs a single binary high-speed asynchronous signal carrying time-of-arrival and time-over-threshold information. The chip output signal is digitized,encoded, and sent via a radiation-hard gigabit transceiverand an optical link to the back-end electronics for analysis. This paper reports on the updated design of the FBCM detector and the ongoing testing program.

Zynq SoC FPGA-based water-immersible ultrasonic instrumentation for pipe inspection and gauging

Abstract A re-programmable Zynq system-on-chip (SoC) FPGA-based water-immersible 2-channel ultrasonic instrumentation has been designed and developed and it is mounted inside the IP67-grade enclosures, which is suitable for ultrasonic pipe inspection and gauging applications. The novel, compact Zynq SoC FPGA-based ultrasonic instrumentation system, powered by lithium-ion batteries for its operation over five hours, exhibits its adaptability for challenging environments, including its ability to travel through pipes carrying oil or water. One of the salient features of the 2-channel system is the capability to acquire echo signals using 12-bit/100 MSPS digitizer to provide highly accurate values of the inner diameter (ID) and wall thickness (WT) of the pipe under test. The system has been utilised to acquire and store 256 MB of A-Scan data in the DDR3 memory module of FPGA. Subsequent to five hours of acquisition, data was transferred to the computer to reconstruct B-Scan cross-sectional images for 300 mm nominal bore (NB) Stainless Steel (SS), and Carbon Steel (CS) pipes machined with volumetric and planar standard flaws. The B-Scan images could reveal both types of defects along with the location and size of these flaws. Such ultrasonic instrumentation has become an advanced tool to acquire a large volume of gauging data for pipes operating in harsh conditions, making it a vital asset for the inspection of pipes containing crude oil or processed water for petrochemical and nuclear industries. This paper provides brief details about the ultrasonic PIG instrument, with few inspection results obtained for SS and CS pipes.

Instrumented Balance Error Scoring System in Children and Adolescents-A Cross Sectional Study.

Background: The Balance Error Scoring System (BESS) is a commonly used method for clinically evaluating balance after traumatic brain injury. The utilization of force plates, characterized by their cost-effectiveness and portability, facilitates the integration of instrumentation into the BESS protocol. Despite the enhanced precision associated with instrumented measures, there remains a need to determine the clinical significance and feasibility of such measures within pediatric cohorts. Objective: To report a comprehensive set of posturographic measures obtained during instrumented BESS and to examine the concurrent validity, reliability, and feasibility of instrumented BESS in the pediatric point of care setting. Methods: Thirty-seven participants (18 female; aged 13.32 ± 3.31 years) performed BESS while standing on a force plate to simultaneously compute stabilometric measures (instrumented BESS). Ellipse area (EA), path length (PL), and sway velocity (VM) were obtained for each of the six BESS positions and compared with the respective BESS scores. Additionally, the effects of sex and age were explored. A second BESS repetition was performed to evaluate the test-retest reliability. Feedback questionnaires were handed out after testing to evaluate the feasibility of the proposed protocol. Results: The BESS total score was 20.81 ± 6.28. While there was no statistically significant age or sex dependency in the BESS results, instrumented posturography demonstrated an age dependency in EA, VM, and PL. The one-leg stance on a soft surface resulted in the highest BESS score (8.38 ± 1.76), EA (218.78 cm2 ± 168.65), PL (4386.91 mm ± 1859.00), and VM (21.93 mm/s ± 9.29). The Spearman's coefficient displayed moderate to high correlations between the EA (rs = 0.429-0.770, p = 0.001-0.009), PL (rs = 0.451-0.809, p = 0.001-0.006), and VM (rs = 0.451-0.809, p = 0.001-0.006) when compared with the BESS scores for all testing positions, except for the one-leg stance on a soft surface. The BESS total score significantly correlated during the first and second repetition (rs = 0.734, p ≤ 0.001), as did errors during the different testing positions (rs = 0.489-0.799, p ≤ 0.001-0.002), except during the two-legged stance on a soft surface. VM and PL correlated significantly in all testing positions (rs = 0.465-0.675, p ≤ 0.001-0.004; (rs = 0.465-0.675, p ≤ 0.001-0.004), as did EA for all positions except for the two-legged stance on a soft surface (rs = 0.392-0.581, p ≤ 0.001-0.016). A total of 92% of participants stated that the instructions for the testing procedure were very well-explained, while 78% of participants enjoyed the balance testing, and 61% of participants could not decide whether the testing was easy or hard to perform. Conclusions: Instrumented posturography may complement clinical assessment in investigating postural control in children and adolescents. While the BESS score only allows for the consideration of a total score approximating postural control, instrumented posturography offers several parameters representing the responsiveness and magnitude of body sway as well as a more differentiated analysis of movement trajectory. Concise instrumented posturography protocols should be developed to augment neuropediatric assessments in cases where a deficiency in postural control is suspected, potentially stemming from disruptions in the processing of visual, proprioceptive, and/or vestibular information.

Cutting efficiency and corrosion resistance of heat-treated endodontic files after various disinfection protocols.

The aim of this study is to evaluate the effect of various disinfection protocols on the cutting efficiency and chemical composition of ProTaper, Twisted File, Twisted File Adaptive, and Hedström files. Four experimental groups (n = 10) were presoaked in either enzymatic solution or 1% sodium hypochlorite for 30min, followed by either 5 or 15min of ultrasonic cleaning and then autoclaved. Resin-simulated canals with a single curvature of 38-40° were prepared by each instrument system. Cutting efficiency of each instrument was analyzed by subtracting the final weight from the initial weight of the resin blocks. Chemical compositions were studied by field emission scanning electron microscopy and X-ray energy-dispersive spectrometry. The cutting efficiency of Hedström, ProTaper, and Twisted File instruments decreased compared to their control groups (p < 0.05) whereas it did not change for Twisted File Adaptive. More corrosion was detected with longer ultrasonication time. No difference was observed regarding the pre-soaking media. Disinfection protocols exerted a significant overall effect on the performance of Hedström, ProTaper, and Twisted File instruments. Corrosion, microcracks, and crevices were evident on all tested instruments after disinfection protocols applied. All disinfection protocols, regardless of the pre-soaking media used or the ultrasonic cleaning time applied, have some effect on the cutting efficiency and the surface characteristics of the files.

How Does Intentional Apical Foraminal Enlargement Affect the Foramen and Root Canal Morphology?

IntroductionThis study assessed the effect of intentional foraminal enlargement on the foramen and the apical root canal morphology. MethodSixty mesial roots of mandibular molars were scanned by micro-computed tomography. Their apical foramina were photographed with a stereomicroscope before and after preparation. Three groups were formed (n = 20) according to the working length (WL). G-1: foramen - 1 mm; G0: foramen; and G+1: foramen + 1 mm. Each group originated 2 subgroups (n = 10): G-1: Buchanan's patency (size 10 K-type file) and foraminal debridement (sizes 20, 25 and 30 K-type files); G0 and G+1: rotary foraminal enlargement (ProDesign S size 25/.08) or reciprocating foraminal enlargement (R25). The area, perimeter, transportation, and noninstrumented walls of the foramen were evaluated. The root canal transportation and the centering index of preparation at 1, 3 and 5 mm from the foramen were also assessed. Data were compared statistically (α = 5%). ResultsThe instruments used at the foramen and 1 mm beyond promoted foraminal enlargement and transportation. Regarding NIW, there was no difference between mechanized foraminal enlargements performed at the foramen or 1 mm beyond, similar to the manual foraminal debridement group (P > .05). There was no difference in transportation and centralization at 1-, 3-, and 5-mm apical levels, regardless of the instrumentation systems. ConclusionMechanical preparation at the foramen, or 1 mm beyond, resulted in foraminal enlargement, transportation and were not able to touch all root canal walls that delimit the foramen.

Efficacy of the GentleWave System in the removal of biofilm from the mesial roots of mandibular molars before and after minimal instrumentation: An exvivo study.

To compare the efficacy of Enterococcus faecalis biofilm removal using the GentleWave System (GWS) (Sonendo Inc, CA) on non-instrumented versus minimally instrumented root canal systems. Thirty-four mandibular molars were autoclaved and allocated to four groups: Negative control (n = 5); positive control (n = 5); Group 1: non-instrumentation + GWS (NI + GWS) (n = 12); and Group 2: minimal instrumentation + GWS (MI + GWS) (n = 12). Of 34 samples, 24 samples with Vertucci type 2 configuration within the mesial root of each sample were allocated to Groups 1 and 2 and then matched based on the working length and root canal configuration. After inoculation of samples with E. faecalis for 3 weeks, the GWS was used on Group 1 without any instrumentation and Group 2 after instrumentation of mesial canals until size 20/06v. CFU and SEM analysis were used. Log10 (CFU/mL) from the positive control, and Group 1 and 2 were 7.41 ± 0.53, 3.41 ± 1.54, and 3.21 ± 1.54, respectively. Both groups showed a statistically significant difference in the reduction of viable E. faecalis cells compared to the positive control (Group 1 [p = .0001] and Group 2 [p < .0001]), whilst showing no significant difference between the two tested groups (p < .05). The use of GWS on the non-instrumented root canal system could be an effective disinfection protocol in removing the biofilm without dentin debris formation.

The Influence of Nickel-Titanium (Ni-Ti) Rotary Instrument Systems on Debris and Smear Layer Formation in Endodontic Procedures: An In Vitro Scanning Electron Microscopy Study.

Background Successful endodontic treatment relies on the effective removal of debris and the prevention of smear layer formation within the root canals. The choice of nickel-titanium (Ni-Ti) rotary instrument systems can significantly impact these outcomes. Aim This study aims to evaluate and compare the debris and smear layer formation in root canals of extracted mandibular second premolar teeth following instrumentation with the ProTaper Universal (Dentsply Sirona,Charlotte, NC) (Group II), Twisted File (Kerr Endodontics, Gilbert, AZ) (Group III), and XP Endo (FKG Dentaire,La Chaux-de-Fonds, Switzerland) (Group IV) Ni-Ti rotary instrument systems. Methods In this in vitro study, 60 extracted mandibular second premolar teeth were randomly divided into four groups, each containing 15 teeth. Group I served as the control with no instrumentation. Groups II, III, and IV were instrumented with the ProTaper Universal rotary file, the Twisted File, and the XP Endo file systems, respectively. Debris and smear layer formation were evaluated through scanning electron microscopy (SEM), and photomicrographs were scored using a standardized index. Results Group II (ProTaper) exhibited the highest mean debris and smear layer scores, with values of 3.50 and 2.70, respectively. Group IV (XP Endo) demonstrated the least debris and smear layer formation, with mean scores of 2.65 and 2.08, respectively. Statistical analysis confirmed significant differences among the groups for both debris and smear layer formation. Conclusion The results highlight the practical importance of selecting appropriate Ni-Ti rotary instrument systems to minimize debris and smear layer formation during endodontic procedures. The XP Endo file system showed promise as a favorable choice in this regard, but further clinical research is needed to validate these findings.

Research on the integrated failure analysis method of safety and security of fieldbus transmitters

Fieldbus transmitters are commonly used in modern industrial productions, particularly in Safety Instrumented Systems (SIS). Safety and security are critical considerations in the design and operation of these transmitters. Previous research has tended to address safety issues and security issues separately, but with the increasing complexity of network technology, it is important to analyze them simultaneously. In this paper, a systematic framework for comprehensively analyzing random failures and cyber-attack failures is proposed. The framework adopts the FMEA-IMEA method, which combines Failure Modes and Effects Analysis (FMEA) and Intrusion Modes and Effects Analysis (IMEA), to analyze failure modes and effects of fieldbus transmitters. In addition, by extending Reliability Block Diagrams (RBD), the impact of random failures and cyber-attack failures on fieldbus transmitters is quantitatively determined. At the same time, calculation approach of the residual error rate (RER), Component counting method, and Monte Carlo are used to determine random failure rate and cyber-attack failure rate. Using fieldbus pressure transmitter and fieldbus temperature transmitter as examples, the results demonstrate that security issues can significantly impact the safety integrity level. In fact, the safety integrity level is reduced from SIL3 to SIL1 when cyber-attacks are considered. Compared to existing FMEA, the proposed approach offers a more comprehensive analysis of random failures and cyber-attack failures in fieldbus transmitters.

ENSS (Expanded Nursing Stress Assessment) version 1,0: An Android-Based Mobile Application Efficient Stress Assessment in Nurses

The nursing profession is a profession that is prone to experiencing stress. Long work duration in accompanying patients is one of the factors that causes stress in nurses. To anticipate work-related stress problems, it is necessary to periodically identify the level of stress experienced by nurses. The use of mobile applications needs to be developed for easy and efficient stress assessment Android-based which are expected to help nurses identify the stress they are experiencing. The aim of this study was to developing a stress assessment application android-based to identify stress levels efficiently and effectively. This research uses design Research and Development (R&amp;D) with a product development and validation approach through use trials on 34 nurses with a sampling method that is the total sample. Test use using the instrument System Usability Scale (SUS). The research developed an Android-based stress analysis application called ENSS version 1.0 with login features, stress questionnaire main menu and load interpretation. The test was tested by respondents with a score of 74.78 in the category of Acceptable or Admissible. The ENSS application has been developed and is suitable for use in the identification of stress levels in nurses. The application of ENSS is an assessment of the stress level of nursing so that proper management can be carried out.

Impact of root canal preparation using two single-file systems on the intra-radicular microbiome of teeth with primary apical periodontitis

ObjectivesThis study aimed to describe the effects of two single-file systems on the diversity of the endodontic microbiome of teeth with primary asymptomatic apical periodontitis.Materials and methodsThe root canals from single-rooted teeth with apical periodontitis were prepared using either the Reciproc Blue (RB) or the XP-endo Shaper (XPS) instrument system. The latter was followed by a supplementary step with the XP-endo Finisher (XPF) instrument. For irrigation, 5.25% sodium hypochlorite was used. Root canal samples were taken at the baseline (S1), after preparation (S2), and after the supplementary step (S3). DNA was extracted and subjected to high-throughput sequencing using the MiSeq Illumina platform.ResultsSamples from 10 teeth from the RB and 7 from the XPS group were subjected to DNA sequencing. Initial samples differed significantly from post-preparation samples in bacterial diversity, with no significant difference when comparing the two instrument systems. The most dominant phyla in S2 were Bacteroidetes, Proteobacteria, Firmicutes, Fusobacteria, and Actinobacteria. The same phyla were found to dominate baseline samples and samples taken after using XPF, but with differences in the ranking of the most dominant ones. At the genus level, the most dominant genera identified after RB instrumentation were Bacteroidaceae [G-1], Fusobacterium, and Staphylococcus, while the most dominant genera after XPS instrumentation were Fusobacterium and Porphyromonas. These genera were also dominant in the initial samples.ConclusionsBoth treatment protocols had measurable effects on the root canal microbial diversity, with no significant differences between them. Most of the dominant taxa involved in the primary infection and probably in the aetiology of apical periodontitis were eliminated or substantially reduced.Clinical relevanceThe most dominant taxa that persisted after instrumentation were Fusobacterium, Porphyromonas, Staphylococcus, and Bacteroidaceae [G-1].