Insoluble Residue Research Articles

BIOMASS AND ENERGY CHARACTERISTICS OF MARALFALFA GRASS (Cenchrus purpureus Schumach.) Morrone CULTIVATED IN WARM SUBHUMID CLIMATE TO PRODUCE BIOETHANOL

Biofuels are a sustainable energy option that can contribute to solve some current environmental problems. For example, it seems imperative to find alternative energy sources; and among them adequate and sustainable raw materials to produce biofuels, such as bioethanol. This study, under the assumption that Maralfalfa grass would be a suitable substrate to produce biofuel, aimed at evaluating the biomass yield, chemical composition, and theoretical bioethanol production of Maralfalfa grass (C. purpureus Schumach.) Morrone harvested at three cutting frequencies (CF). Treatments were distributed in a randomized complete blocks design with split-plots arrangement and three replicates. Analysis of variance was done with GLM procedure and means were compared with Tukey test (p≤0.05). At 120 d, the lignocellulosic material content was the highest (p≤0.05) with 66% of holocellulose, 30% hemicellulose, 22% lignin, 1.8% acid soluble lignin, 20% acid insoluble lignin, 26% acid insoluble residue, and 6.2% ashes. The highest concentration of extractives compounds was found at 150 d harvest frequency (15.5%; p≤0.05), while the highest biomass production (32.6 Mg ha-1 y-1), calorific value (21.0 MJ kg-1), and bioethanol production (239.9 L Mg-1 MS-1) was obtained at the 180 d (p≤0.05). No significant changes were found for crude protein (p>0.05). Results showed that Maralfalfa grass (C. purpureus Schumach.) Morrone is an attractive alternative for bioethanol production due to high biomass yield and chemical composition at short harvesting times.

Natural pigment: Preparation of brown pigment from lignin biomass for coloring application

Nanopigment based coatings have attracted considerable interest due to their high surface area, enhanced covering strength, resistance to scratch and abrasion properties. The preparation of nano pigments from industrial waste is challenging and can potentially be used in various industrial applications. As per environmental concerns, utilization of insoluble residues such as black liquor separated from paper and pulp industry waste as value added products is essential for industrial waste management. Tailoring of nanosized pigment colorants with improved surface covering properties from the industrial waste black liquor has been proposed. The acidified and precipitated insoluble organic part of black liquor was used for pigment preparation. Surface modification of pigment with silica coating, through sol-gel method, using synthesized Gemini surfactant, was adopted for size reduction. The prepared nanopigments were characterised through Fourier Transform Infrared Spectroscopy (FT-IR), Reflectance measurement and Transmission Electron Microscope (TEM). The results for optical studies of the prepared pigment confirms the suitability of this surface modified pigment as a brown coloring agent. From the DLS measurements, the dispersion property of prepared pigment was found to be monodispersed with a narrow size distribution of approximately 50–200 nm. The industrial applicability of such nano pigment was analysed by utilizing it as colorant for the leather surface coating as well as in plastics. Commercial viability of nano-pigments as coloring agents, adds value to the paper and pulp industry waste in a sustainable way.

Study of a process of obtaining of protein preparation from sunflower seeds for application in food industry

The article deals with a study of processing methods of obtaining protein preparations from sunflower seeds. For obtaining of food-grade protein preparations from the defatted sunflower kernels phenolic compounds were additionally removed. Modern Russian and foreign literature sources devoted to the isolation of phenolic compounds from vegetable protein raw materials were analyzed. The objective of obtaining a light-colored food-grade protein preparation from sunflower seeds was solved through developing of a multi-stage extraction process with removal of various groups of non-protein compounds, including the stage of aqueous ethanol extraction and removal of phenolic compounds. Parameters of different stages of obtaining of protein substances from defatted sunflower seed kernels after removal of phenolic compounds were studied. These stages included alkaline extraction of protein and nitrogen-free extractives (NFE), separation of the insoluble residue, isoelectric precipitation of protein compounds from the clarified extract, neutralization of the protein suspension. Drying of the protein suspension was carried out on a laboratory spray installation Buchi Mini Spray Dryer with a temperature at the entrance of the dryer 180–190 ℃ and at the exit – up to 90 ℃. Protein preparations of light gray color were obtained with a crude protein content of 75,72% and 87,15% on dry matter basis, which corresponds to the crude protein content of commercial sunflower and soy protein concentrates. Solubility pattern of proteins and functional characteristics of finished protein preparations after spray drying have been analyzed. Based on the high fat-holding capacity and moderate fat-emulsifying properties of the obtained protein preparations it’s possible to recommend the obtained sunflower protein preparation for usage as a vegetable protein enricher and functional additive in food industry.

New Deposit of Mordenite-Clinoptilolite in the Eastern Region of Cuba: Uses as Pozzolans.

This work describes the newly discovered zeolites in the eastern region of Cuba. In the researched area, there have been no previous studies of natural zeolite exploration. Therefore, the results shown here are new. The main object of this research is to analyse five samples of zeolites and demonstrate their pozzolanic capacity and the possibility of their usage in the industrial manufacturing of pozzolanic cements. The study of the samples was performed by X-ray diffraction (XRD), X-ray fluorescence (XRF) and scanning electron microscopy (SEM). A chemical analysis (CAQ) to determine the quality of the samples as pozzolans was performed, by determining the total SiO2, reactive SiO2, total CaO, reactive CaO, Al2O3, MgO and the insoluble residue (I.R.). Lastly, an eight-day pozzolanicity analysis (PA) was carried out to determine the pozzolanic reactivity of the samples. The results obtained by XRD, XRF and SEM established that the researched zeolite samples have two main zeolitic phases: mordenite and clinoptilolite. Altered volcanic glass, quartz and smectite (montmorillonite) are the secondary phases. The results of the chemical quality analysis (CAQ) showed that the samples contain a considerable amount of reactive SiO2 and reactive CaO, as well as a low content of insoluble residue, which reinforces their properties as pozzolans. The results of the pozzolanicity analysis (PA) concluded that the analysed samples actively react with Ca(OH)2 after eight days. Based on all the results mentioned above, it is established that both mordenite and clinoptilolite behave like pozzolans and can be recommended for the manufacture of pozzolanic cements, which have more effective properties than Portland cement, in terms of physical, chemical and mechanical strength, low heat of hydration, resistance to sulphates, low CO2 emissions to the atmosphere and negligible impacts on the environment.

Topochemistry of the Delignification of Japanese Beech (Fagus crenata) Wood by Supercritical Methanol Treatment.

The topochemistry of Japanese beech (Fagus crenata) wood delignification was evaluated in this study following a supercritical methanol treatment (270 °C, 27 MPa). Ultraviolet microscopic analysis of the insoluble residue revealed that the lignin in the secondary wall was easily decomposed and removed because of the preferential cleavage of ether-type linkages. In contrast, the middle lamella lignin was initially resistant to supercritical methanol but eventually decomposed and was removed. In addition, UV-absorbing secondary products formed selectively inside the parenchyma cells. Results from the supercritical methanol treatment of demineralized beech wood indicated that inorganic substances in the lumen of parenchyma affected the formation of these secondary products, thus leading to an overestimation of the residual lignin. Therefore, the topochemistry of delignification was more precisely evaluated when using demineralized beech wood.

ИССЛЕДОВАНИЕ ВОЗМОЖНОСТИ УПРАВЛЕНИЯ УСРЕДНЕНИЕМ РУДЫ МЕТОДАМИ КЛАССИЧЕСКОЙ ТЕОРИИ УПРАВЛЕНИЯ

The importance of the problem of ore averaging at potash enterprises and the search for the optimal set of measures to eliminate the problem are shown. The problem of a large spread of insol-uble residues in the potash enterprises of the Verkhnekamsky District is identified. At the moment, it is solved by bunker averaging, but this does not always work effectively. It was suggested to use the previously described method of meaningful distribution in the warehouse and targeted sampling depending on the composition. A mathematical model of loading and unloading of the warehouse was constructed; algorithms and calculation of the coordinates of the point of discharge and extrac-tion of ore were proposed, depending on the content of insoluble residue and potassium chloride in the ore. This method excludes the possibility of manufacturing defects and carries out the averaging of raw materials in an optimal way. According to the indicators in the simulation model, targeted sampling in the warehouse reduces the percentage spread of insoluble residues in the ore. It was de-cided to investigate the sampling process in the warehouse for identification. Purpose of work is to test the possibility of controlling the sample as a conventional technological object using a propor-tional-integral-differentiating controller. To do this, the control object was identified, namely: a sin-gle impact jump was applied to the system input. Materials and methods. The standard impact was modeled on a previously developed warehouse simulation model, where the geometric parameters of the warehouse, the physical parameters of the ore elements, as well as the parameters of the noz-zle and scraper movement are set. With its help, potassium chloride from ore is conducted. The re-sults of the ore sampling are recorded for the initial installations, and then after a five percent jump. The simulation results are presented as a normalized graph for comparing the results and determin-ing the behavior of the system. Result. The resulting array of values was moved to the previously developed transfer function calculator. Based on the values found, a smoothed normalized graph was constructed, which had to be identified. As a result of this work, the transfer function of the first-order aperiodic link with a delay was obtained. Conclusion. When analyzing the graphs, a con-clusion about the validity of the obtained function was made. Based on the obtained arrays of val-ues, an error of 6,5% was calculated. The transfer function has been identified, so the sample in the warehouse can be controlled using a proportional-integral-differentiating controller.

Improvement of Water Resistance of Vegetable Proteins by the Use of Synthetic Origin Additives: Trials with Resins and Metal Ions

The adhesives industry is increasingly interested in products coming from natural and renewable resources. The aim of the present work was to improve the water resistance of soy-based proteins by using synthetic and formaldehyde-free additives. These include polyamide-amine epichlorohydrin (PAE), different types of isocyanates, and combinations of these cross-linkers between them and with other agents, including metal ions. In addition, the effect of both curing temperature and maturation time was assessed. Performances were evaluated by means of shear strength tests, solubility tests, and spectroscopic analysis. The obtained results showed that while isocyanates reacted completely but with water instead of proteins, tests with PAE were generally successful. In fact, the insoluble residue as well as the shear strength in wet conditions dramatically increased after PAE addition. Moreover, the wet performances of protein/PAE formulations appreciably increased gluing at 60 °C instead of room temperature. Furthermore, the maturation time had a positive effect on the formulations where metal ions were added, both for solubility and wet shear strength. Actually, for the very long conditioning time of 3 months, a significant and substantial increase of wet shear strength was observed for the series protein/PAE/aluminum.

A systematic high-throughput phenotyping assay for sugarcane stalk quality characterization by near-infrared spectroscopy

BackgroundSugarcane (Saccharum officinarum L.) is an economically important crop with stalks as the harvest organs. Improvement in stalk quality is deemed a promising strategy for enhancing sugarcane production. However, the lack of efficient approaches for systematic evaluation of sugarcane germplasm largely limits improvements in stalk quality. This study is designed to develop a systematic near-infrared spectroscopy (NIRS) assay for high-throughput phenotyping of sugarcane stalk quality, thereby providing a feasible solution for precise evaluation of sugarcane germplasm.ResultsA total of 628 sugarcane accessions harvested at different growth stages before and after maturity were employed to take a high-throughput assay to determine sugarcane stalk quality. Based on high-performance anion chromatography (HPAEC-PAD), large variations in sugarcane stalk quality were detected in terms of biomass composition and the corresponding fundamental ratios. Online and offline NIRS modeling strategies were applied for multiple purpose calibration with partial least square (PLS) regression analysis. Consequently, 25 equations were generated with excellent determination coefficients (R2) and ratio performance deviation (RPD) values. Notably, for some observations, RPD values as high as 6.3 were observed, which indicated their exceptional performance and predictive capability.ConclusionsThis study provides a feasible method for consistent and high-throughput assessment of stalk quality in terms of moisture, soluble sugar, insoluble residue and the corresponding fundamental ratios. The proposed method permits large-scale screening of optimal sugarcane germplasm for sugarcane stalk quality breeding and beyond.

Geochemistry, Mineralogy and Textural Properties of the Lower Globigerina Limestone Used in the Built Heritage

The Lower Globigerina Limestone Member, the oldest member of the Globigerina Limestone Formation, outcrops over most of the Maltese archipelago, notably Malta. It has provided the islands’ main building material since the Neolithic period. This paper makes available a corpus of findings relating to the geochemistry, mineralogy and textural properties of this limestone—mostly unpublished and undertaken nearly three decades ago—which provide a useful source to understand its behavior. Bulk chemistry and mineralogy showed that non-carbonate and clay content is higher in limestone of inferior quality. Textural analyses gave insight into the fabric of the matrix, including inter- and intra-particle porosity. These analyses were supplemented by an array of petrophysical tests, including color (a parameter which has a correlation with density and Fe2O3 content), ultrasonic pulse velocity and compressive strength. The findings not only give insight into the composition of the limestone, using insoluble residue content of ≥5% as the threshold of inferior quality lithotype, but provided an insight into the physico-mechanical bonding present, a characteristic which has a bearing on the deterioration of this limestone.

RHEOLOGICAL, CHEMICAL AND FUNCTIONAL IMPACTS OF ALCOHOL INSOLUBLE RESIDUE FROM POTATO PROCESSING BY-PRODUCT ENRICHED BREAD USING RESPONSE SURFACE METHODOLOGY

The aim of this study was to evaluate and optimize incorporation of alcohol insoluble residue from potato processing by-product (AIR-PPB) in wheat flour bread at different particle sizes by using response surface methodology (RSM). Results showed an improvement in the functional properties of the AIR-PPB in terms of water holding capacity (WHC), swelling capacity (SC) and water solubility index (WSI) as particle size increased. As portion of AIR-PPB and particle size increased, total dietary fiber content, water absorption (WA), dough development time (DDT) increased. Higher particle size giving more stability to the dough structure but had inverse effect on dough weakening (DW). Breads with lower specific volumes, higher hardness were associated with increment in AIR-PPB incorporation level at higher particle size. All the sensory attributes of experimental and control breads were acceptable.

Chemical Bonded Oil-PTFE-PA66 Composites as Novel Tribologically Effective Materials: Part 1

Polytetrafluoroethylene (PTFE) is characterized by outstanding non-stick properties and very low friction coefficients under tribological load. However, PTFE is incompatible with almost all other polymers exhibits cold flow and a low wear resistivity. However, PTFE can be modified e.g. in the presence of air by using high-energy radiation to achieve carboxylic acid fluorid- (-COF), carboxyl- (-COOH) functional groups and persistent perfluoroalkyl (peroxy) radicals. The hydrophilic functional groups of radiation-modified PTFE can be used to generate a chemically covalent coupling with other monomers/polymers (e.g. polyamides) via addition reactions. Another approach to get a chemical bonding of modified PTFE is the use of radicals for the covalent attachment of olefinic groups (e.g. in oils) through radical reactions. It is already known that the dispersion of modified PTFE in synthetic oils at elevated temperatures results in very stable PTFE-oil dispersions, which have improved tribological properties and are compatible with metals.The aim of this study is the development of novel tribologically effective materials based on radiation-modified PTFE, oil and polyamide 66 (PA66). In the first synthesis step, a chemical coupling between selected oils and various types of PTFE was performed. The bonding was proved by fourier-transform infrared spectroscopy (FTIR) after removing oil excess and further extraction of insoluble residue. Additional electron spin resonance measurements (ESR) showed that the linkages mainly resulted from radical reactions. The second processing step was the chemical coupling of PA66 and oil-modified PTFE by reactive extrusion. In order to get an idea about the influence of the chemical bonding of both lubricants with the polymer matrix on the mechanical material properties compared to origin PA66, multipurpose test specimens according to ISO 3167 were prepared by injection molding. It was found, that even bigger amounts of bonded lubricants did not deteriorate the mechanical characteristics in a significant manner. Finally, initial tribological testing of the novel materials was carried out by using a block on ring tribometer test set up. The antifriction and wear behaviour, as well as the transfer film thickness, were analyzed subsequently.

Extraction of Rare Earth Metals by Solid-Phase Extractants from Phosphoric Acid Solution

Nowadays, solving the problem of rational, integrated use of the mined raw materials, the transition to waste-free technologies for its processing is a crucial task. The sulfuric acid technology used for the processing of apatite concentrates on a large industrial scale does not provide the associated extraction of accompanying valuable components—rare earth metals (REM). During apatite concentrate processing, rare-earth metals are affected by the technology-related dispersion, being distributed between the insoluble leaching residue and phosphoric acid solution sent to the production of fertilizers. The necessity of a cost-effective method development for the extraction of rare earth metals is quite obvious already in connection with the indicated significance of the problem. Phosphoric acid solutions that simulate the composition of industrial phosphoric acid solutions of the following composition 4.5 mol/L H3PO4, 0.19 mol/L H2SO4 and 0.10–0.12% REM were selected as the object of research. The extraction of rare earth metals was carried out using polymers containing a fixed layer of an extractant—di-2-ethylhexylphosphoric acid (D2EHPA). Fixed layer was obtained by impregnation-saturation (solvent-impregnated resin (SIR)) or by the introduction of an extractant at the stage of polymer matrix synthesis (extractant-resin extraction (ERE)). The work determined the thermodynamic and technological characteristics of the solid-phase extraction of rare earth elements from phosphoric acid solutions with polymers impregnated with D2EHPA and containing a rigidly fixed extractant in a styrene-divinylbenzene resin matrix. The possibility of effective multiple use of polymeric resins containing D2EHPA, regenerated with a solution of 1 mol/L sodium citrate, was revealed.

Redox conditions, glacio-eustasy, and the status of the Cenomanian–Turonian Anoxic Event: new evidence from the Upper Cretaceous Chalk of England

The nature of the Cenomanian–Turonian Oceanic Anoxic Event (CTOAE) and its δ13 C Excursion is considered in the light of (1) the stratigraphical framework in which the CTOAE developed in the European shelf seas, (2) conclusions that can be drawn from new detailed investigations of the Chalk succession at three locations in England, at Melton Ross and Flixton in the Northern Province where organic-rich ‘black bands’ are present, and at Dover in the Southern Province (part of the Anglo-Paris Basin) where they are absent, and (3) how these conclusion fit in with the present understanding of the CTOAE. The application of the cerium anomaly method (German and Elderfield 1990) at Dover, Melton Ross and Flixton has allowed the varying palaeoredox conditions in the Chalk Sea and its sediments to be related to the acid insoluble residues, organic carbon, δ18O (calcite), δ13C (calcite), δ13C (organic matter), Fe 2+ and Mn2+ (calcite), and P/TiO2 (acid insoluble residue). This has provided evidence that the initial stages of the δ13C Excursion in England were related to (1) a drop of sea level estimated at between 45 and 85 metres, (2) influxes of terrestrial silicate and organic detritus from adjacent continental sources and the reworking of exposed marine sediments, and (3) the presence of three cold water phases (named the Wood, Jefferies and Black) associated with the appearance of the cold-water pulse fauna during the Plenus Cold Event. Conditions in the water column and in the chalk sediment were different in the two areas. In the Northern Province, cerium-enriched waters and anoxic conditions were widespread; the δ13C pattern reflects the interplay between the development of anoxia in the water column and the preservation of terrestrial and marine organic matter in the black bands; here the CTOAE was short-lived (~0.25 Ma) lasting only the length of the Upper Cenomanian Metoicoceras geslinianum Zone. In the Southern Province, water conditions were oxic and the δ13C Excursion lasted to the top of the Lower Turonian Watinoceras devonense Zone, much longer (~1.05 Ma) than in the Northern Province. These differences are discussed with respect to (1) the Cenomanian–Turonian Anoxic Event (CTAE) hypothesis when the ocean-continent-atmosphere systems were linked, (2) limitations of chemostratigraphic global correlation, and (3) the Cenomanian–Turonian Anoxic Event Recovery (CTOAER), a new term to define the varying lengths of time it took different oceans and seas to recover once the linked ocean-continent-atmosphere system was over. The possibility is considered that glacio- eustasy (the glacial control hypothesis of Jeans et al. 1991) with the waxing and waning of polar ice sheets, in association with the degassing of large igneous provinces, may have set the scene for the development of the Cenomanian–Turonian Anoxic Event (CTAE).

Investigation and prediction of sticking tendency, blocks formation and occasional melting of lime at HT (1300 °C) by the overburning test method

The overburning test method was developed to simulate and predict lime densification, agglomeration, and sporadic melting at the highest potential temperature of lime kilns. These events, that belong to the so-called “sticking tendency” phenomenon, are associated to formation of crusts, occlusions, and blockages in vertical lime kilns. In this work, fifty carbonate rocks, their insoluble residues, and derived burnt products were investigated through a multianalytical approach. Four groups of rocks having different burnability were identified. In addition, three fundamental mechanisms were related to the above-mentioned phenomena: dehydration melting, solid-state, and liquid-phase sintering processes. Guidelines for raw materials suitability were outlined for designing new kilns and to check the quality control in already active plants.

Speciation of rare earth elements in acid mine drainage precipitates by sequential extraction

Recent efforts have shown that acid mine drainage precipitates (AMDp) may be a promising source of rare earth elements and critical materials (REE/CM). To better understand this resource, several particle characterization studies were conducted on AMDp samples from three AMD treatment sites in Northern and Central Appalachia. This work included the determination of particle size, size distribution, morphology, mineralogy, chemical speciation, and rare earth content. While the particle characteristics and mineralogy varied considerably from site to site, sequential extraction tests showed that the largest portion of REEs (45% to 75%) were found in soluble phases bound to Fe-Mn oxides. Carbonates (5% to 16%) and insoluble residues (4% to 24%) were also found to be significant in some samples, suggesting that different AMD chemistry and AMD treatment approaches can lead to substantial variation in the deportment of REEs to the various chemical phases. Altogether, the results suggest that chemical extraction of REEs from AMDp can be achieved under mild conditions with high recovery values; however, the significant site-by-site variation will necessitate detailed testing of individual samples to determine the overall economic viability.

Fiber Cell-Specific Expression of the VP16-Fused Ethylene Response Factor 41 Protein Increases Biomass Yield and Alters Lignin Composition.

Arabidopsis thaliana transcription factors belonging to the ERFIIId and ERFIIIe subclade (ERFIIId/e) of the APETALA 2/ethylene response factor (AP2/ERF) family enhance primary cell wall (PCW) formation. These transcription factors activate expression of genes encoding PCW-type cellulose synthase (CESA) subunits and other genes for PCW biosynthesis. In this study, we show that fiber-specific expression of ERF035-VP16 and ERF041-VP16, which are VP16-fused proteins of ERFIIId/e members, promote cell wall thickening in a wild-type background with a concomitant increase of alcohol insoluble residues (cell wall content) per fresh weight (FW) and monosaccharides related to the PCW without affecting plant growth. Furthermore, in the ERF041-VP16 lines, the total amount of lignin and the syringyl (S)/guaiacyl (G) ratio decreased, and the enzymatic saccharification yield of glucose from cellulose per fresh weight improved. In these lines, PCW-type CESA genes were upregulated and ferulate 5-hydropxylase1 (F5H1), which is necessary for production of the S unit lignin, was downregulated. In addition, various changes in the expression levels of transcription factors regulating secondary cell wall (SCW) formation were observed. In conclusion, fiber cell-specific ERF041-VP16 improves biomass yield, increases PCW components, and alters lignin composition and deposition and may be suitable for use in future molecular breeding programs of biomass crops.

Characterisation of Purified Gypsum and Insoluble Impurities Obtained from Phosphogypsum Waste

In this study, the chemical and phase composition of two samples of phosphogypsum from the waste dumps of the Industry of ChemicalProducts “Elixir – Prahovo” (Serbia) were examined, as well as the possibility of recrystallization of gypsum from an aqueoussuspension of phosphogypsum. The negative effect of higher temperatures on the solubility of calcium sulfate (13.08 mmol/dm3 at95°C vs. 15.43 mmol/dm3 at 40°C) was utilized. In several repeated cycles, calcium sulfate component was progressively dissolvedin water at room temperature and then precipitated at 100°C, using the same liquid phase throughout the experiment. Therefore,phosphogypsum was separated into recrystallized (purified) gypsum, insoluble residue and supernatant, and the mass balance forthe experiment was calculated. Elemental, XRD and SEM-EDS analyses were performed on raw phosphogypsum, purified gypsumand insoluble residue. The whiteness of raw phosphogypsum and purified gypsum were determined and compared. The main objectiveof the study was to investigate the nature of insoluble impurities, in order to define and optimize the methods for their removalduring a potential industrial processing of phosphogypsum.

Soil organic carbon stock and fractional distribution across central-south China

The stock and stability of soil organic carbon (SOC) are critical to soil functions and global carbon cycle, but little quantitative information is available on the precise location and chemical components of SOC for soils across a wide range of climatic gradients. Here, a broad range of zonal soils were collected in forest land at topsoil (0–15 cm) and subsoil (15–30 cm) from temperate to tropical climatic gradient in central to south China. The stock and stability of SOC were determined in terms of aggregate and humic fractionation. SOC in bulk soils with a less significant geographic variation was comparably higher at Haplic Luvisoils in temperate regions (3637.61 g m−2) and Rhodi-Humic Ferrosols in tropical regions (3446.12 g m−2) than in the other experimental soils, but a consistent decreasing trend was observed along the soil profiles with the SOC stock was 1.11–1.97 times higher in the topsoil than in the subsoils. In addition, insoluble humin residue (HMr) as the dominant components of SOC ranged from 643.95 to 2696.90 g m−2 and decreased from temperate to tropical regions, which was consistent with the zonal variation of humic acids (HAs), but contrary to the zonal variation of fulvic acids (FAs) that fluctuated in a range of 39.67–389.55 g m−2 across the experimental sites. According to the results of partial correlation analysis, the variation of FAs stock was significantly attributed to soil pH, bulk density, iron and aluminum oxides, clay, and clay mineral content (|r|>0.61, p < 0.05), while these soil physical properties showed a contradictory effects on HAs, iron-linked humin (HMi), clay-combined humin (HMc), and HMr. Moreover, the aggregate-associated carbon stock was mainly stored in macroaggregates (36.34–76.09%) for both SOC and its chemical components, especially in topsoils, and its zonal variation was associated with that of bulk soils. In general, the redundancy analysis (RDA) revealed that mean annual precipitation (MAP) accounted for 81.8% and 13.8% of the variance in SOC chemical and physical fractionation, respectively, while the corresponding contribution of mean annual temperature (MAT) was 1.5% and 34.7%. With the increase of MAT and MAP, the chemical stability of SOC decreased in the molecular structure, and the physical protection of SOC by aggregate exhibited a unimodal trend. The obtained results would facilitate the development of regional soil carbon prediction and land management against global warming.

Cell Wall Polysaccharide Composition of Grafted 'Liberty' Watermelon With Reduced Incidence of Hollow Heart Defect.

Grafting watermelon scions to interspecific squash hybrids has been found to increase fruit firmness. Triploid (seedless) watermelon are prone to hollow heart (HH), an internal fruit disorder characterized by a crack in the placental tissue expanding to a cavity. Although watermelon with lower tissue firmness tend to have a higher HH incidence, associated differences in cell wall polysaccharide composition are unknown. Grafting “Liberty” watermelon to “Carnivor” (interspecific hybrid rootstock, C. moschata × C. maxima) reduced HH 39% and increased tissue firmness by 3 N. Fruit with and without severe HH from both grafted and non-grafted plants were analyzed to determine differences in cell wall polysaccharides associated with grafting and HH. Alcohol insoluble residues (AIR) were sequentially extracted from placental tissue to yield water soluble (WSF), carbonate soluble (CSF), alkali soluble (ASF), or unextractable (UNX) pectic fractions. The CSF was lower in fruit with HH (24.5%) compared to those without HH (27.1%). AIRs were also reduced, hydrolyzed, and acetylated for GC-MS analysis of monosaccharide composition, and a portion of each AIR was methylated prior to hydrolysis and acetylation to produce partially methylated alditol acetates for polysaccharide linkage assembly. No differences in degree of methylation or galacturonic and glucuronic acid concentrations were found. Glucose and galactose were in highest abundance at 75.9 and 82.4 μg⋅mg–1 AIR, respectively, followed by xylose and arabinose (29.3 and 22.0 μg⋅mg–1). Mannose was higher in fruit with HH (p < 0.05) and xylose was highest in fruit from grafted plants (p < 0.05). Mannose is primarily found in heteromannan and rhamnogalacturonan I side chains, while xylose is found in xylogalacturonan or heteroxylan. In watermelon, 34 carbohydrate linkages were identified with galactose, glucose, and arabinose linkages in highest abundance. This represents the most comprehensive polysaccharide linkage analysis to date for watermelon, including the identification of several new linkages. However, total pectin and cell wall composition data could not explain the increased tissue firmness observed in fruit from grafted plants. Nonetheless, grafting onto the interspecific hybrid rootstock decreased the incidence of HH and can be a useful method for growers using HH susceptible cultivars.

Analytical implications of different methods for preparing plant cell wall material

Almost all plant cells are surrounded by a wall constructed of co-extensive networks of polysaccharides and proteoglycans. The capability to analyse cell wall components is essential for both understanding their complex biology and to fully exploit their numerous practical applications. Several biochemical and immunological techniques are used to analyse cell walls and in almost all cases the first step is the preparation of an alcohol insoluble residue (AIR). There is significant variation in the protocols used for AIR preparation, which can have a notable impact on the downstream extractability and detection of cell wall components. To explore these effects, we have formally compared ten AIR preparation methods and analysed polysaccharides subsequently extracted using high-performance anion exchange chromatography (HPAEC-PAD) and Micro Array Polymer Profiling (MAPP). Our results reveal the impact that AIR preparation has on downstream detection of cell wall components and the need for optimisation and consistency when preparing AIR.