Ink Particles Research Articles

Prediction of Flotation Deinking Performance: A Comparative Analysis of Machine Learning Techniques

Flotation deinking is one of the most widely used techniques for the separation of ink particles from cellulose fibers during the process of paper recycling. It is a complex process influenced by a variety of factors, and is difficult to represent and usually results in models that are inconvenient to implement and/or interpret. In this paper, a comprehensive study of several machine learning methods for the prediction of flotation deinking performance is carried out, including support vector regression, regression tree ensembles (random forests and boosting) and Gaussian process regression. The prediction relies on the development of a limited dataset that assumes representative data samples obtained under a variety of laboratory conditions, including different reagents, pH values and flotation residence times. The results obtained in this paper confirm that the machine learning methods enable the accurate prediction of flotation deinking performance even when the dataset used for training the model is limited, thus enabling the determination of optimal conditions for the paper recycling process, with only minimal costs and effort. Considering the low complexity of the Gaussian process regression compared to the aforementioned ensemble models, it should be emphasized that the Gaussian process regression gave the best performance in estimating fiber recovery (R2 = 97.77%) and a reasonable performance in estimating the toner recovery (R2 = 86.31%).

Direct Printing of Disperse Dye Inks to Polyester Fabrics without Chemical Pretreatment.

Direct inkjet digital printing is a relatively green and environmentally friendly textile printing method with a wide range of applications in the textile printing and dyeing industry. However, pretreatment of the fabric is required before digital printing, which will generate certain energy consumption and wastewater. In this study, a digital direct inkjet printing method was developed to improve the printing accuracy of poly(ethylene terephthalate) (PET) fabrics without any pretreatment. A kind of direct inkjet printing ink was prepared by the response change in temperature viscosity. The increase in viscosity inhibits ink bleeding on the fabric, thereby improving printing accuracy. A thermosensitive direct inkjet printing disperse dye ink was prepared by adding cetyltrimethylammonium bromide (CTAB) and 3-methylsalicylic acid (3MS) to the ink. By evaluating the changes in the ink particle size, shear viscosity, and temperature viscosity, it was found that this thermosensitive ink has an excellent average particle size and special changes in viscosity with increasing temperature. When this heat-sensitive ink is printed on a polyester fabric, the fabric does not need pretreatment to improve the clarity of printing, and the printed fabric has satisfactory color fastness to friction and washing.

Development of Efficient Ink Dispersion Process for Solid-State Electrolyte and Electrode Manufacturing

All-solid-state lithium batteries (ASSBs) have several advantages over lithium-ion batteries (LIBs) such as higher safety thresholds associated with solid electrolytes (SEs) and the possibility of using lithium metal or silicon anodes to achieve comparatively higher energy and power density. The SE can also prevent chemical interactions with dissolved active materials, and thus solve the issue of long-term instability of LIBs. However, there are also challenges associated with ASSBs manufacturing, such as local stress and contact-loss between SE and active materials in cathodes due to active material “breath”, poor contact and high ionic resistance at the SE-cathode interface, difficulty in fabricating thin SEs, and the absence of scalable and cost-effective manufacturing processes (J. Janek and W.G. Zeier, Nature Energy 8 (2023): 230-240). A key to tackling these issues begins with ink formulation for electrolyte and cathode coating, including ink compositions and rheological properties.In this study, we report the influence of ink preparation methods and conditions on the solid-state electrolyte and cathode coating qualities, where lithium lanthanum zirconium oxide (LLZO) and lithium nickel manganese cobalt oxide (NMC) are used as model systems. Various mixing methods, such as acoustic wave mixing, high-speed off-axis mixing, and thin film mixing, are compared. Their influence on ink viscosity and particle dispersion, coating thickness and microstructure uniformity, and electrolyte and electrode electrochemical properties will be discussed.

Evolution of the network structure and voltage loss of anode electrode with the polymeric dispersion in PEM water electrolyzer

Exploring the intrinsic relationship between the network structure and the performance of catalyst layer (CL) by rational design its structure is of paramount importance for proton exchange membrane (PEM) electrolyzers. This study reveals the relative effect of polymeric dispersion evolution on oxygen evolution reaction (OER) performance and cell voltage loss and linked to CL network structure. The results show that although the dispersed particle size of the ionomer and ink increases with increasing the solubility parameter (δ) difference between the mixed solvent and the ionomer, MeOH-cat (ink from MeOH aqueous solution) has the largest ionomer and ink particle size resulting in the poorest stability, but has comparable OER overpotential to that of IPA-cat (249 mV@10 mA cm−2), which has the smallest dispersed size. While at 100 mA cm−2, the overpotential of the ink rises as the particle size increases, suggesting that the electrode structure becomes more influential as the current density increases. Quantitatively analyzed the electrolyzers’ voltage losses and determined that the CL from MeOH-cat has the lowest kinetic overpotential. However, its performance is the worst because of the insufficient network structure of CL, resulting in an output of 1.96 V at 1.5 A cm−2. Comparatively, the CL from IPA-cat has the highest kinetic overpotential yet can achieve the greatest performance of 1.76 V at 2 A cm−2 due to its homogeneous network structure and optimal mass transport. Furthermore, the performance variation becomes more pronounced as current density rises. Hence, this study highlights the significant impact of CL structure on electrolyzer’s performance. To improve performance in PEM water electrolysis technology, especially for large work current density, it is crucial to enhance the CL’s network structure.

Effect of catalyst ink particle size on the structure of the catalyst layer and electrical performance in the process of ultrasonic spray manufacturing PEMFCs

Proton exchange membrane fuel cells (PEMFCs) have the advantage of high energy conversion efficiency. This study introduces a novel strategy aimed at enhancing the performance of fuel cells through the optimization of process parameters pertaining to the ultrasonic spraying of catalyst layers. This study found that with an increase in flow rate or a decrease in pressure, the atomization particle size of the catalyst ink enlarges, broadening the size distribution simultaneously. Larger ink droplets falling on the Nafion membrane result in a greater concentration of particles building up within the coffee ring, leading to deformities like orange peel texture, protrusions, and grooves within the catalyst layer. Consequently, the polarization curve deteriorates, and Pmax (peak power density) diminishes. Research has shown that optimizing the process parameters of ultrasonic spraying can optimize the catalyst layer structure, improve the mass transfer performance of membrane electrode assemblies (MEAs), and is an effective new solution for improving MEAs performance.

Deep Tattoo Ink Depth Profiling in Ex Vivo Porcine Skin Using Diffuse Reflectance Spectroscopy

Human body is a complex system composed of various chemicals, and thus inserting any foreign chemicals can lead to long-lasting damage. One such process is tattooing, which is widely common among all sections of human society. Nevertheless, there is a huge demand for safe tattoo removal, intending to target only the ink particles and protect the skin components. This work discusses the development of a non-invasive technique to assess tattoo ink location in the deep tissue layers. Tattoo ink was injected systematically from 1-6 mm depth, parallel to the surface of an <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">ex vivo</i> porcine skin. The adopted methodology of the crossover point-based diffuse reflectance (DR) technique could effectively and precisely detect the tattoo ink location in the depths. A good quantitative agreement between the detected ink location and injected ink depth on cross-section tattooed skins were observed. The DR technique thus opens avenues for new applications in the clinical field for a non-invasive understanding of deep tissue regimes.

Interfacial Colloidal Self-Assembly for Functional Materials

ConspectusSelf-assembly bridges nanoscale and microscale colloidal particles into macroscale functional materials. In particular, self-assembly processes occurring at the liquid/liquid or solid/liquid/air interfaces hold great promise in constructing large-scale two- or three-dimensional (2D or 3D) architectures. Interaction of colloidal particles in the assemblies leads to emergent collective properties not found in individual building blocks, offering a much larger parameter space to tune the material properties. Interfacial self-assembly methods are rapid, cost-effective, scalable, and compatible with existing fabrication technologies, thus promoting widespread interest in a broad range of research fields.Surface chemistry of nanoparticles plays a predominant role in driving the self-assembly of nanoparticles at water/oil interfaces. Amphiphilic nanoparticles coated with mixed polymer brushes or mussel-inspired polydopamine were demonstrated to self-assemble into closely packed thin films, enabling diverse applications from electrochemical sensors and catalysis to surface-enhanced optical properties. Interfacial assemblies of amphiphilic gold nanoparticles were integrated with graphene paper to obtain flexible electrodes in a modular approach. The robust, biocompatible electrodes with exceptional electrocatalytic activities showed excellent sensitivity and reproducibility in biosensing. Recyclable catalysts were prepared by transferring monolayer assemblies of polydopamine-coated nanocatalysts to both hydrophilic and hydrophobic substrates. The immobilized catalysts were easily recovered and recycled without loss of catalytic activity. Plasmonic nanoparticles were self-assembled into a plasmonic substrate for surface-enhanced Raman scattering, metal-enhanced fluorescence, and modulated fluorescence resonance energy transfer (FRET). Strong Raman enhancement was accomplished by rationally directing the Raman probes to the electromagnetic hotspots. Optimal enhancement of fluorescence and FRET was realized by precisely controlling the spacing between the metal surface and the fluorophores and tuning the surface plasmon resonance wavelength of the self-assembled substrate to match the optical properties of the fluorescent dye.At liquid/solid interfaces, infiltration-assisted (IFAST) colloidal self-assembly introduces liquid infiltration in the substrate as a new factor to control the degree of order of the colloidal assemblies. The strong infiltration flow leads to the formation of amorphous colloidal arrays that display noniridescent structural colors. This method is compatible with a broad range of colloidal particle inks, and any solid substrate that is permeable to dispersing liquids but particle-excluding is suitable for IFAST colloidal assembly. Therefore, the IFAST technology offers rapid, scalable fabrication of structural color patterns of diverse colloidal particles with full-spectrum coverage and unprecedented flexibility. Metal-organic framework particles with either spherical or polyhedral morphology were used as ink particles in the Mayer rod coating on wettability patterned photopapers, leading to amorphous photonic structures with vapor-responsive colors. Anticounterfeiting labels have also been developed based on the complex optical features encoded in the photonic structures.Interfacial colloidal self-assembly at the water/oil interface and IFAST assembly at the solid/liquid/air interface have proven to be versatile fabrication platforms to produce functional materials with well-defined properties for diverse applications. These platform technologies are promising in the manufacturing of value-added functional materials.

Flame-retardant fibre-particle-polymer semiconductive networks for physically transient supercapacitors and chemiresistors

With fast development of green economy and carbon neutral society, biodegradable and sustainable materials are urgent needed for multifunctional transient electronics. Here, a flexible, green and flame-retardant fibre-particle-polymer network is developed for physically transient supercapacitors and chemiresistors. By regulating 1D-0D-2D ternary interface, micro/nanoarchitectured polyaniline/ink/alginate semiconductive network enables effective electrolyte infiltration and abundant surface adsorption and diffusion. Moreover, the 0D ink particles promote interface bonding between 1D alginate fibres and 2D polyaniline, giving rise to better wear resistance, compression-after-impact strength and electrical conductivity. As expected, the transient supercapacitor delivers high areal capacitance of 134.1 mF cm−2, and the transient gas sensor exhibits desirable response (33 %) and long-term stability (56 days) toward 40 ppm NH3 at room temperature, which is superior to most of previous reports. This work pushes forward a significant step towards fibre-particle-polymer interfacial design of physically transient electronics and shows great potential in flexible platform based on comfortable biofibers.

Carbon black-containing self-healing adhesive hydrogels for endoscopic tattooing

Endoscopic tattooing with India ink is a popular method for identifying colonic lesions during minimally invasive surgery because it is highly challenging to localize lesions during laparoscopy. However, there is a perceived unmet need for the injection of India ink and carbon particle suspension due to various complications and inconstant durability during the perioperative period. In this study, carbon black-containing self-healing adhesive alginate/polyvinyl alcohol composite hydrogels were synthesized as endoscopic tattooing inks. Alginate (Alg) conjugated with phenylboronic acid (PBA) groups in the backbone was crosslinked with polyvinyl alcohol (PVA) because of the dynamic bonds between the phenylboronic acid in alginate and the cis-diol groups of PVA. The carbon black-incorporated Alg-PBA/PVA hydrogels exhibited self-healing and re-shapable properties, indicating that improved intraoperative localization could be achieved. In addition, the adhesive tattooing hydrogels were stably immobilized on the target regions in the intraperitoneal spaces. These carbon black-containing self-healing adhesive hydrogels are expected to be useful in various surgical procedures, including endoscopic tattooing.

Gecko-inspired hierarchically rough surface used as a reprintable paper

While paper continues to remain one of the most widely used materials for writing and printing, and while its demand continues to grow, the environmental cost of using paper is rather huge. Paper is made by extracting the cellulose fibres from wood, and to meet the demand for it, large numbers of trees are felled. Making paper requires huge quantity of water, energy, and also toxic chemicals. In fact, paper is considered the 3rd largest industrial polluter of air, water, and soil. Yet a viable alternative to paper doesn't exist. Inspired by the inherent ability of many natural surfaces to keep themselves clean, we have made a reprintable paper which can be used over 50 cycles. It is prepared by casting crosslinkable silicone on a porous template, leading to hierarchical random surface features having dimensions ranging from tens of nano-meter to hundreds of micrometers. On this surface, ink particles of wide-ranging sizes and surface chemical characteristics adhere via intermolecular interactions. However, unlike conventional papers, in which particles get mechanically trapped inside the porous network of the cellulose fibres, here the ink particles remain accessible for cleaning via gentle scrubbing with a rough surface, soaked with a suitable liquid. Thus, this paper continues to remain both cleanable and printable.

Ink formulation and printing of electrolyte for a doped ceria solid oxide fuel cell

• Synthesis of highly printable ceria-based electrolyte for a solid oxide fuel cell. • Polymeric 20 mol% gadolinium-doped ceria nanoparticle ink formulated. • Printed gadolinium-doped ceria films of thickness 130 nm obtained. • Proper adjustment of ink rheology and particle size ensures successful printing. We propose a simple ink formulation and a rapid preparation technique to deposit a 20 mol% gadolinium-doped ceria electrolyte utilizing nanopowders and a polymeric dispersant. The ink was assessed for printability and was successfully printed using a piezoelectric inkjet materials printer. The ejected drops were investigated using built-in stroboscopic imaging during ejection, and the deposited thin films were characterised using optical microscopy and surface profilometry. Inkjet material deposition provides a highly repeatable process for the fabrication of solid oxide fuel cells (SOFCs) that can be up-scaled to industrial levels.

A new method of studying the fundamental mechanisms involved in pigment liberation from recycle papers

Deinking flotation is the most efficient and widely used method of removing ink particles from printed papers to improve the recyclability. A prerequisite for successful deinking flotation is detachment of pigments from paper fibers, a subprocess known as liberation. The degree of liberation is usually determined via hyperwashing tests, which are costly and time consuming. Furthermore, they provide no information on the fundamental mechanisms controlling liberation. In the present work, we developed a new method in which potentials of the particles in a pulp are measured and analyzed. If pigments are not liberated from paper fibers, a frequency distribution plot gives a single peak, while two peaks appear when they are liberated. One can readily determine the degrees of liberation from the peak positions and peak heights. In addition, the potential data can be used to construct disjoining pressure isotherms using the DLVO theory that are useful to better understand the fundamental mechanisms involved and the roles of different reagents used to improve pigment liberation.

Flotation de-inking for recycling paper: contrasting the effects of three mineral oil-free offset printing inks on its efficiency.

Paper for recycling has become a promising raw material for the pulp and paper industry due to its low cost and because it is conducive to sustainable development. Unfortunately, recycled paper contains a high volume of printed paper that is difficult to deink, which restricts its applications. Flotation deinking plays an essential role in the product quality and process cost of wastepaper recycling. This study was performed to evaluate the deinkability of environmentally friendly offset inks by flotation deinking. For this purpose, three mineral oil free series of four-color inks, namely, hybrid light emitting diode ultraviolet (LED-UV), LED-UV, and vegetable oil-based inks, were printed on white lightweight coated papers under laboratory conditions. The deinking methodology involves repulping, deinking agent treatment, flotation, hand sheet making, and evaluation of the produced hand sheets. The obtained results indicated that the hybrid LED-UV prints had the best deinkability. After flotation deinking, the deinking efficiency and the whiteness of the hybrid LED-UV ink increased by 58.1% and 47.6%, respectively. LED-UV ink had a 46.9% increase in the deinking efficiency and a 37.0% increase in the whiteness of the hand sheet. The deinking efficiency of the vegetable oil-based ink was the lowest, at 42.1%, and the whiteness of the hand sheet increased only by 23.8%. The particle size distribution analysis demonstrated that the hybrid LED-UV four-color ink exhibited a larger value of the average particle size than the two other. Scanning electron microscopy revealed that the hybrid LED-UV ink particles on the surface of the fibers were the least abundant after deinking. The physical strength properties of the hand sheets, including tensile index, folding resistance, and interlayer bonding strength of the hybrid LED-UV, LED-UV inks, and vegetable oil-based inks, increased.

Influence of Ink Properties on the Morphology of Long-Wave Infrared HgSe Quantum Dot Films.

As the core device of the miniature quantum dot (QD) spectrometer, the morphology control of the filter film array cannot be ignored. We eliminated strong interference from additives on the spectrum of a long-wave infrared (LWIR) QD filter film by selecting volatile additives. This work is significant for detecting targets by spectroscopic methods. In this work, a filter film with characteristic spectral bands located in the LWIR was obtained by the natural evaporation of QD ink, which was prepared by mixing various volatile organic solvents with HgSe QD–toluene solution. The factors affecting the morphology of HgSe LWIR films, including ink surface tension, particle size, and solute volume fraction, were the main focus of the analysis. The experimental results suggested that the film slipped in the evaporation process, and the multilayer annular deposition formed when the surface tension of the ink was no more than 24.86 mN/m. The “coffee ring” and the multilayer annular deposition essentially disappeared when the solute particles were larger than 188.11 nm. QDs in the film were accumulated, and a “gully” morphology appeared when the solute volume fraction was greater than 0.1. In addition, both the increase rate of the film height and the decrease rate of the transmission slowed down. The relationship between film height and transmission was obtained by fitting, and the curve conformed to the Lambert–Beer law. Therefore, a uniform and flat film without “coffee rings” can be prepared by adjusting the surface tension, particle size, and volume fraction. This method could provide an empirical method for the preparation of LWIR QD filter film arrays.

The role of fatty acid of Morinda citrifolia oil as surface-active chemicals on the deinking process of waste paper

The natural surfactant from Morinda citrifolia seed oil was developed for deinking flotation. In this study, the comparative performances of natural surfactant and synthetic surfactant (SS) was investigated. Natural surfactants consist of several compounds element, namely saturated fatty acids, monounsaturated fatty acids, and polyunsaturated fatty acids. The results provide a new phenomenon in which intermolecular bonding occurs between the tail of the carbon chains methyl ester (FAMC) and the ink particles, this is due to the presence of unsaturated compounds (C=C) in the carbon chains structure of fatty acid methyl ester. The results also show that the binding force between synthetic surfactant compounds and ink particles produces a higher viscosity when compared to the bonding forces between FAMC compounds and ink particles. These results indicate that natural FAMC surfactants can weaken the molecular bonds of the ink and increase the reactivity of ink particles. These results indicate that the deinking performance of natural surfactants is better than synthetic surfactants.

Chemical and enzymatic deinking efficiency of agricultural and industrial waste fiber-based paper packaging.

Deinking is an important part of paper recycling that involves the removal of ink particles from the paper fibres. This industrial process is important so that the fibres can be recirculated back into paper production, which enables better sustainability as fewer fresh fibres are needed. In this study, we examined five different alternative fibre materials from different agricultural residues and industrial processes for the pilot production of papers. Papers containing fibres from invasive plants (Japanese knotweed), dedicated crops (miscanthus, acacia), agricultural residues (tomato stems), and industrial waste (jute - fibres from coffee bags) were printed with water-based flexo inks and deinked with two separate processes (chemical and enzymes). Mechanical (break and tensile index, breaking length) and optical properties (ISO whiteness, brightness and CIE L*a*b* values) were measured and ink elimination IR700 and deinking efficiency was calculated for the two deinking processes. Enzymatic treatment improved the mechanical properties of deinked pulp in comparison with the classic chemical treatment. Mechanical strength for almost all papers increased slightly (breaking length up to 20% in tomato and jute), and the optical result (brightness) increased similarly for both processes due to the bleaching action of the colour-shaded samples, whereas the deinking efficiency showed mixed results between chemical- and enzyme-type deinking (with chemical achieving better elimination measured at 700 nm) in the typical range of ink elimination values (15-35%) for flexographic inks. This indicates further optimization of the deinking with enzymes is needed due to different alternative fibre compositions and variations of residues in the delignification processes. Using a combination of adjusted enzymatic treatment as a precursor for deinking of paper-based packaging materials sourced from alternative fibres showed promising results regarding mechanical properties, whereas the optical properties need to be improved with cellulase optimization or by using mixes of different enzymes. These kinds of paper materials printed with flexo inks were found to be successfully deinkable with the chemical ISO-based deinking protocol. © 2022 Society of Chemical Industry.

Enhancing ink adhesion of specialty paper using an interpenetrating polyvinyl alcohol-blocked polyurethane polymer network sizing system.

The printing quality and strength of specialty papers such as money, maps, newspapers and bank notes have been a significance challenge in recent years. The adhesive effect between ink and paper is depend on both the secondary binding force between the molecules and the mechanical anchoring effect of the ink on the paper. Also, the porous and fibrous structures of base paper restrain its application in printed products because of the strong capillary effect leading to the diffusion of ink particles. To address the problems involved in ink diffusion and mechanical reinforcement, surface sizing is an attractive choice from the perspective of paper handling. Herein, the surface sizing system of specialty paper with an interpenetrating polyvinyl alcohol-blocked polyurethane polymer network was applied to fabricate paper of high ink adhesive properties. In the case of the same external factors (gluing temperature, drying time, etc.), the surface sizing effect of paper samples (sizing with TBPU, polyvinyl alcohol and TBPU/PVA system) were evaluated by infrared spectroscopy, X-ray photoelectron spectroscopy, water contact angle measurements and scanning electron microscopy. Some of the pure cotton pulp paper with surface sizing treatment was treated via adhering inks to paper by spraying, smearing and soaking. The bonding strength was tested by peel-off tape tests, soaking tests, and simulated washing tests. The results showed that the water contact angle of the sized-paper increased from 67.6° to 89.7°. The mechanical properties had been greatly improved after treatment and SEM, AFM and XPS analyses indicated an increase in surface roughness and the oxygen-containing polar groups (C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> O, C–OH, –NH–COO– and COOH) enhanced the fixation of ink particles on the fiber surface. These tests indicated that the novel composite system of TBPU/PVA could endow specialty paper with superb mechanical properties and more than 90% ink retention rate. All these advantages of this composite system may contribute to its wide application in the fields of papermaking and printing.

Influence of Printing Technique and Printing Conditions on Prints Recycling Efficiency and Effluents Quality

The aim of this work was to determine the influence of the conventional offset printing technique and digital electrophotography printing with liquid toner (LEP) on some optical properties of recycled fibres. A series of LEP prints was made with the variation of the negative voltage of the developing drum (−200 V, −280 V, −350 V, and −430 V) after calibration of the machine and achieving standard densitometry values. Besides deinkability aspects, the quality of wastewater effluents after process of prints recycling was observed in order to make a conclusion regarding how different printing techniques, conditions in printing process, and different types of inks can affect the wastewater effluents. Results of image analysis showed that by increasing the negative voltage of developing drum in LEP printing technique, the formation of large ink particles on handsheet from recycled pulp increases. Depending on the size of the negative voltage of the developing drum, under the same experimental conditions, handsheets made from LEP recycled fibres have lower whiteness gain, brightness gain, and ΔERIC of handsheets compared to those made from the offset prints. In addition, a certain correlation was found between IEERIC (ink elimination), chemical oxygen demand (COD), and total organic carbon (TOC) of wastewater effluents after recycling of LEP prints and offset prints as well. Organic water pollution parameters (COD and TOC) showed higher values in wastewater after recycling of offset prints compared to recycling of LEP prints.

Edible Amorphous Structural Color

AbstractDue to the scarcity of blue color in the natural food palette, synthetic blue edible colorants are commonly used in daily life. With growing awareness of environmental hazards and potential side‐effect impacts of synthetic food colorants on customers’ health, synthetic blue edible colorants are no longer a good choice. Here, a strategy of mixing two edible sub‐microspheres, mesoporous hollow TiO2 sub‐microspheres or SiO2 sub‐microspheres and cuttlefish ink particles, is reported to produce mass amorphous photonic structures (APSs) with structural color. The hues can be tuned by controlling the size of mesoporous hollow TiO2 sub‐microspheres, and the saturation is strongly related to the proportion of cuttlefish ink particles. Cytotoxicity assays and evaluation of bioaccessibility in the simulated human digestive system further prove the safety of the blue structural colorants. The blue structural colorants exhibit high color visibility, thermostability, and reliable food safety, which are promising properties for food, drugs, and cosmetics.

Producing Direct Food Packaging Using Deinked Office Paper Grades—Deinkability and Food Contact Suitability Evaluation

Paper recycling is the most eco-efficient waste management option, since the use of recycled fibers reduces the need for virgin wood fiber and lowers energy consumption, and hence has a positive effect on the environment. The use of recycled paper is by far the highest in the packaging industry. In food packaging production, recycled paper is often favored over paper and board made from virgin fibers. However, due to the possible hazardous chemicals that can be found in recycled paper, there is a dilemma of how to overcome food safety issues while making food packaging more circular. The objective of the study was to determine if deinked office paper grades could be used as an alternative fiber source in the production of food packaging white top linerboards. For that purpose, three different types of digitally printed papers were submitted to a chemical deinking flotation in laboratory conditions, and the handsheets formed after each recycling trial were tested on the suitability for direct food contact. Evaluation of deinkability for each group of recycled prints was performed, as well. Deinkability was evaluated by calculating the flotation yield, pulp’s brightness and whiteness increase, ink elimination factor, determination of residual ink area, as well as ash content elimination. Food safety evaluation was performed by determining the content of heavy metals (Cd, Pb, Hg, and Cr VI), primary aromatic amines, diisopropylnaphthalenes (DIPN), phthalates, and polychlorinated biphenyls (PCB) from aqueous or organic solvent extracts of recycled paper pulp. The fastness of the fluorescent whitening agents was determined, as well. Of all evaluated deinking flotation efficiency parameters, only flotation yield and ash reduction by flotation were positively assessed. High content of residual ink particles detected after the flotation stage indicates that the flotation was not a successful method for the elimination of disintegrated ink particles, which was also confirmed by deficient results of ink elimination measurements and whiteness increase. Flotation proved to be the least efficient in the recycling of inkjet prints, where the lowest ink elimination, whiteness, and brightness values were achieved. As far as food safety assessment of deinked pulp is concerned, all tested deinked handsheets were found suitable to be used in direct contact with foods.