Injection Energy Research Articles

Recent advances and mechanism of plasmonic metal-semiconductor photocatalysis.

Benefiting from the unique surface plasmon properties, plasmonic metal nanoparticles can convert light energy into chemical energy, which is considered as a potential technique for enhancing plasmon-induced semiconductor photocatalytic reactions. Due to the shortcomings of large bandgap and high carrier recombination rate of semiconductors, their applications are limited in the field of sustainable and clean energy sources. Different forms of plasmonic nanoparticles have been reported to improve the photocatalytic reactions of adjacent semiconductors, such as water splitting, carbon dioxide reduction, and organic pollutant degradation. Although there are various reports on plasmonic metal-semiconductor photocatalysis, the related mechanism and frontier progress still need to be further explored. This review provides a brief explanation of the four main mechanisms of plasmonic metal-semiconductor photocatalysis, namely, (i) enhanced local electromagnetic field, (ii) light scattering, (iii) plasmon-induced hot carrier injection and (iv) plasmon-induced resonance energy transfer; some related typical frontier applications are also discussed. The study on the mechanism of plasmonic semiconductor complexes will be favourable to develop a new high-performance semiconductor photocatalysis technology.

Upgrades and developments related to stable ion beams injectors at INFN-LNL

The LNL accelerator complex is equipped with two stable ion beams injectors, employing respectively negative and positive ion sources. In particular, a sputtering-type negative ion source and an Electron Cyclotron Resonance Ion Source (ECRIS) are installed on high voltage platforms, to provide the optimum injection energy in the downstream accelerators. Recently, the two injectors have been object of upgrades and developments, in order to improve the overall safety and reliability of the two systems, as well as the beams available for the users. This contribution describes the work related to the above-mentioned activities, the technical choices employed and the latest results on ion beams production.

Optoelectronic Characterization of Natural Dyes in the Quest for Enhanced Performance in Dye-Sensitized Solar Cells: A Density Functional Theory Study

This study employs density functional theory (DFT) to evaluate the optoelectronic features of five natural dyes (cyanidin, delphinidin, pelargonidin, peonidin, and petunidin) in gas and ethanol phases for potential dye-sensitized solar cell (DSSC) applications. Calculations cover HOMO and LUMO energy levels, charge transfer potential gaps, and light absorption properties correlated with oscillator strengths. Photovoltaic aspects, including light-harvesting efficiency (LHE), electron injection efficiency (ΔGinject), regeneration efficiency (ΔGregen), open-circuit voltage (VOC), excited-state lifetime (τ), and the electronic coupling constant (|VRP|), were computed to assess DSSC suitability. DFT analysis reveals that cyanidin, delphinidin, and petunidin exhibit favorable LUMOs for efficient electron injection into the semiconductor’s conduction band. Cyanidin demonstrates a high quantum yield for light absorption. Delphinidin and petunidin act as effective light absorbers with high excitation energies and oscillator strengths, while petunidin and delphinidin display strong LHE, indicating excellent electron-donating capabilities. Peonidin shows promising ΔGinject despite needing more energy for injection. Pelargonidin excels in ΔGregen and |VRP|, enhancing DSSC performance. Petunidin and delphinidin exhibit a high VOC. Petunidin efficiently transmits energy through a large τ, while pelargonidin’s |VRP| confirms its potential as a favorable sensitizer. In summary, each dye possesses unique properties, and understanding them aids in selecting the most suitable dye for enhanced DSSC performance.

Energy storage density and efficiency of polyetherimide nanocomposites diminished by the temperature dependent charge hopping

AbstractThe utilization of renewable energies requires extensive use of energy storage equipment such as dielectric capacitor. Polyetherimide nanocomposites (PEI PNCs) have high energy storage performance, and become the next generation advanced dielectrics However, the quantitative relation between the charge transport and energy storage of PEI PNCs is not very clear, restricting further improvement of their performance. Considering the charge injection from electrodes and the charge hopping transport inside the dielectric, the energy storage and release model of capacitors was established. Firstly, the conductivities of PEI PNCs were simulated, and the charge transport parameters were determined by comparing with the experiments. Then, the electric displacement‐electric field (D‐E) loops of PEI PNCs were simulated, and the discharged energy density and energy efficiency were calculated from them. The simulation results are consistent with the experiments, and the quantitative relationship between charge injection and transport parameters and energy storage performance is established. In addition, it is found that the energy storage density and efficiency are diminished by the increase of hopping distance at high temperatures. Increasing the hopping barrier, reducing the hopping distance and its temperature dependence through nano‐doping can significantly improve the energy storage performance under high temperatures and high electric fields.

Photovoltaic properties of novel reactive azobenzoquinolines: experimental and theoretical investigations

Abstract In this work, synthesis, characterization, DFT, TD-DFT study of some novel reactive azobenzoquinoline dye structures to elucidate their photovoltaic properties. The azobenzoquinoline compounds were experimentally synthesized through a series of reaction routes starting from acenaphthene to obtained aminododecylnaphthalimide and finally coupled with diazonium salts to get the desired azobenzoquinoline. Azo dye synthesized differ in the number of alkyl chains designated as (AR1, AR2, AR3, and AR4) which were experimentally analyzed using FT-IR and NMR spectroscopic methods. The synthesized structures were modelled for computational investigation using density functional theory (DFT) and time-dependent density functional theory (TD-DFT) combined with B3LYP and 6-31+G(d) basis set level of theory. The results showed that the HOMO-LUMO energy gap was steady at approximately 2.8 eV as the alkyl chain increases, which has been proven to be within the material energy gap limit for application in photovoltaic. The highest intramolecular natural bond orbital (NBO) for the studied compounds is 27.60, 55.06, 55.06, and 55.04 kcal/mol for AR1, AR2, AR3, and AR4 respectively and the donor and acceptor interacting orbitals for the highest stabilization energy (E (2)) are LP(1)N 18 and π*C 16−O 19 respectively. The photovoltaic properties in terms of light-harvesting efficiency (LHE), Short circuit current density (J SC), Gibbs free energy of injection (ΔG inj), open-circuit voltage (V OC) and Gibbs free energy of regeneration (ΔG reg) were evaluated to be within the required limit for DSSC design. Overall, the obtained theoretical photovoltaic results were compared with other experimental and computational findings, thus, are in excellent agreement for organic solar cell design.

Laboratory validation of a new hydro-mechanical energy-based brittleness index model for hydraulic fracturing

Brittleness Index (BI) is a critical parameter characterising the deformation regime of geo-materials, covering the range from purely brittle (fractures) to ductile (plastic flow). A variety of BI models have been developed based on rock properties such as mineralogy, elastic parameters, or constitutive law. However, very few of them are based on the hydro-mechanical interactions emerging in underground engineering applications. In this study, we propose a BI model based on the partitioning of the injection energy EI into non-seismic deformation energy Ed associated with hydraulic fracture propagation. To calculate the Ed, we apply a model for temporal fracturing area (Ad) within the penny-shaped fracture; and we also correlate the wellbore pressure and the three-dimensional strain induced by hydraulic fracturing of the different types of rock samples subjected to true triaxial stress conditions (TTSC), either σv = 6.5 MPa, σH = 3 MPa, σh = 1.5 MPa or σv = 15 MPa, σH = 10 MPa, σh = 5 MPa. As a comparison, the BI is also quantified based on the existing models: (i) acoustic measurement from Rickman et al. (2008), and (ii) the Mohr-Coulomb’s criteria from Papanastasiou et al. (2016). The Ed ranges between 32.4% and 90.6% of the total injection energy EI, which is slightly higher than the value reported from field-scale data (15% to 80%), but comparable to laboratory-derived data (18% to 94%) from literature. The results show that the predictions based on our proposed energy-based BI model are qualitatively consistent with Papanastasiou et al.’s, but less so with Rickman et al.’s. Our BI model is shown to be stress-dependent and capable of capturing the brittle-to-ductile behaviour of geomaterials subjected to hydraulic fracturing. This study demonstrates that our BI model opens a new way for quantifying the brittleness index regarding to realistic fracture propagation scenarios in field.

A Joint Theoretical and Experimental Study on a Tetrazole‐Anchored BODIPY‐Based Dye at the Surface of TiO2 for Dye‐Sensitized Solar Cell Applications

The performance of the created BODIPY‐based dye compound in dye‐sensitized solar cells is evaluated. The electrical and charge transport characteristics of the dye are examined using the density functional theory and time‐dependent density functional theory. By calculating EHOMO, ELUMO, λmax, Eex, light‐harvesting efficiency, reorganization energy, and the free injection energy (ΔGinj), attributes of the dye are identified. In comparison to the performance of N719 dye (5.16%), the device performance of synthesized BODIPY dye is reported to have an efficiency of 0.34%. Electrochemical outcomes are consistent with the efficiency outcomes and have a larger charge transport resistance for BODIPY (85.9 Ω) than for N719 (6.1 Ω).

Unprecedented confinement time of electron plasmas with a purely toroidal magnetic field in SMARTEX-C

Confinement time of electron plasmas trapped using a purely toroidal magnetic field has been found to exceed {100}, hbox {s} in a small aspect ratio (R_{o}/a sim {1.59}, R_o and a are device major and minor radius, respectively), partial torus. It improves upon the previously reported confinement time by nearly two orders of magnitude. Lifetime is estimated from the frequency scaling of the linear diocotron mode launched from sections of the wall, that are also used for mode diagnostics. Confinement improves as neutral pressures are reduced to < 5 times 10^{-10} hbox{mbar} in the presence of a steady state magnetic field of 200 Gauss (sim {60}, hbox {s} with droop < 0.1%) at {100}, hbox {V} electron injection energies. With reduced pressures the role of (ion driven) instability diminishes and loss mechanisms resulting from elastic electron–neutral (e–n) and the ubiquitous electron–electron (e–e) scattering seem to play an important role which suggests low electron temperatures. The contribution to electron population resulting from the ionization of background neutral gas at these temperatures and pressures are expected to be insignificant and is corroborated in our experiments.

Simulation study of interaction between energetic particles and magnetohydrodynamic modes in the JT-60SA inductive scenario with a flat q≈1 profile

Interactions between energetic particles (EPs), an internal kink mode, and other magnetohydrodynamic (MHD) instabilities in the inductive scenario of JT-60SA (scenario # 2) are simulated with MEGA, a global EP–MHD hybrid code. For this scenario, it was predicted by TOPICS, an integrated transport code that the internal kink mode can be unstable and the sawtooth relaxation results in a flat safety factor (q) profile with q ≈ 1 for r/a⩽0.6 . In this equilibrium, it is found in the simulation results that the stability of the internal kink mode depends strongly on the bulk plasma pressure gradient ( ∇Pb ). In the n = 1 simulations where the toroidal mode number is restricted to n = 0 and 1, the pressure-driven internal kink mode is dominant. In the presence of co-passing EPs generated by the negative-ion-based neutral beam (NB), these EPs transfer energy to the internal kink mode; however, the EP driving rate ( γh ) is much lower than the driving rate from the bulk plasma pressure gradient ( γP ). The mode’s frequency is less than 1 kHz because the toroidal orbit frequency (ω φ ) and poloidal orbit frequency (ω θ ) of the co-passing EPs are approximately equal within the q = 1 surfaces. This mode affects the EP and bulk plasma pressure redistributions. The feasibility of stabilizing the internal kink mode using trapped EPs is also investigated. It is found that the trapped EPs with energy 85 keV generated by the positive-ion-based NBs cannot stabilize the internal kink mode. Stabilization is observed when the injection energy is greater than 500 keV. In the multi-n simulations, where n⩽8 modes are retained, the most unstable modes are high n interchange modes with poloidal number m = n whose linear growth rates exceed that of the pressure-driven internal kink mode observed in the n = 1 simulations. The overlapping of these modes creates a stochastic magnetic field, leading to stronger EP and bulk plasma pressure redistributions than those observed in the n = 1 simulations. During the nonlinear phase, the transition from the high m = n modes to the low m = n modes is observed where the dominant mode is the m/n=1/1 mode with an internal kink-like structure. These low m = n modes are generated by the nonlinear coupling of the high m = n modes. The EP kinetic effect has a minor contribution to the dynamics of these nonlinearly generated m = n modes.

Physics basis for the Wisconsin HTS Axisymmetric Mirror (WHAM)

The Wisconsin high-temperature superconductor axisymmetric mirror experiment (WHAM) will be a high-field platform for prototyping technologies, validating interchange stabilization techniques and benchmarking numerical code performance, enabling the next step up to reactor parameters. A detailed overview of the experimental apparatus and its various subsystems is presented. WHAM will use electron cyclotron heating to ionize and build a dense target plasma for neutral beam injection of fast ions, stabilized by edge-biased sheared flow. At 25 keV injection energies, charge exchange dominates over impact ionization and limits the effectiveness of neutral beam injection fuelling. This paper outlines an iterative technique for self-consistently predicting the neutral beam driven anisotropic ion distribution and its role in the finite beta equilibrium. Beginning with recent work by Egedalet al.(Nucl. Fusion, vol. 62, no. 12, 2022, p. 126053) on the WHAM geometry, we detail how the FIDASIM code is used to model the charge exchange sources and sinks in the distribution function, and both are combined with an anisotropic magnetohydrodynamic equilibrium solver method to self-consistently reach an equilibrium. We compare this with recent results using the CQL3D code adapted for the mirror geometry, which includes the high-harmonic fast wave heating of fast ions.

Exceptional Spatial Variation of Charge Injection Energies on Plasmonic Surfaces.

Charge injection into a molecule on a metallic interface is a key step in many photoactivated reactions. We employ the many-body perturbation theory and compute the hole and electron injection energies for CO2 molecule on an Au nanoparticle with ∼3,000 electrons and compare it to results for idealized infinite surfaces. We demonstrate a surprisingly large variation of the injection energy barrier depending on the precise molecular position on the surface. Multiple "hot spots," characterized by low energy barriers, arise due to the competition between the plasmonic coupling and the degree of hybridization between the molecule and the substrate. The charge injection barrier to the adsorbate on the nanoparticle surface decreases from the facet edge to the facet center. This finding contrasts with the typical picture in which the electric field enhancement on the nanoparticle edges is considered the most critical factor.

Post Trajectory Insertion Performance Analysis of Korea Pathfinder Lunar Orbiter Using SpaceX Falcon 9

This paper presents an analysis of the trans-lunar trajectory insertion performance of the Korea Pathfinder Lunar Orbiter (KPLO), the first lunar exploration spacecraft of the Republic of Korea. The successful launch conducted on August 4, 2022 (UTC), utilized the SpaceX Falcon 9 rocket from Cape Canaveral Space Force Station. The trans-lunar trajectory insertion performance plays a crucial role in ensuring the overall mission success by directly influencing the spacecraft’s onboard fuel consumption. Following separation from the launch vehicle (LV), a comprehensive analysis of the trajectory insertion performance was performed by the KPLO flight dynamics (FD) team. Both orbit parameter message (OPM) and orbit determination (OD) solutions were employed using deep space network (DSN) tracking measurements. As a result, the KPLO was accurately inserted into the ballistic lunar transfer (BLT) trajectory, satisfying all separation requirements at the target interface point (TIP), including launch injection energy per unit mass (C3), right ascension of the injection orbit apoapsis vector (RAV), and declination of the injection orbit apoapsis vector (DAV). The precise BLT trajectory insertion facilitated the smoother operation of the KPLO’s remainder mission phase and enabled the utilization of reserved fuel, consequently significantly enhancing the possibilities of an extended mission.

Effects of Bending on Nucleation and Injection of Oxygen Vacancies into the Bulk Lattice of Li‐Rich Layered Cathodes

AbstractThe degradation of Li‐ and Mn‐rich (LMR) cathodes primarily results from the thermodynamic instability of lattice oxygen and the resulting oxygen release. This is promoted by localized lattice strain, which develops dynamically during electrochemical reactions involving repeated Li‐ion intercalation and extraction. However, the role of chemomechanical strain in degrading lattice oxygen's stability is not yet well‐understood. Here, the research indicates that uneven strain distribution causes bending, resulting in lower activation energy for oxygen vacancy creation and injection into particle interiors at bending points. Combining in situ transmission electron microscopy and theoretical simulations, it is shown that the largest O─O interaction occurs at the maximum curvature point, reducing Mn─O bonding strength, promoting oxygen dimer formation, and eventually initiating oxygen release from LMR. As a result, a process is designed to adjust the Li‐content and the distribution of the two‐phase structure, achieving better cycling stability in LMR cathodes with a more balanced distribution of strain. These results provide insights into enhancing LMR cycling stability while utilizing their high capacity.

Formation of Nanoscale Protrusions on Polymer Films after Atomic Oxygen Exposure: Observations with Positron Annihilation Lifetime Spectroscopy.

Atomic oxygen (AO) is one of the dominant components of the residual atmosphere in low Earth orbit. AO collides with spacecraft with a translational energy of 5 eV, forming nanoscale protrusions on polymeric materials. To clarify the influences of a polymer's chemical structure on the formation of AO-induced microstructures, this study investigated the size of free-volume holes and the layer thickness that interacted with AO for polyethylene (PE), polypropylene (PP), and polystyrene (PS) by positron annihilation lifetime spectroscopy. The injection energies of positrons varied from 1.3 to 10 keV to adjust the injection depth (range) into the polymers (40 nm-1.6 μm). For the pristine films, the lifetime of ortho-positronium (o-Ps, τ3) was longer in the order of PS, PP, and PE regardless of the injection energy of positrons, showing the different sizes of free-volume holes with radii of 0.29, 0.31, and 0.32 nm, respectively. The fraction of the decay component corresponding to o-Ps in all decay components (relative intensity of o-Ps, I3) was used to investigate the chemical change induced by AO exposure. The I3 values for the three polymers were decreased by AO exposure of (2-5) × 1018 atoms/cm2 or more at a depth of 40-48 nm, obtained by 1.3 keV positrons. This indicates that AO formed polar groups (i.e., an oxidized layer) on the polymer surfaces. The maximum depths of such chemical change for PE and PP were deeper than that for PS. The different sizes of free-volume holes would affect the diffusion or ballistic penetration of AO, resulting in the difference in the oxidized layers' thicknesses and surface morphologies.

Ultra-low emission power generation utilizing chemically stabilized waste plastics pyrolysis oil in RCCI combustion concept

Emission standards in European Union, designed to reduce the environmental impact of power generation, present a significant challenge for fast-response distributed power generation systems based on internal combustion engines. Regulated emissions, such as NOx and particulate matter present a major concern due to their adverse number of environmental and health effects. Simultaneously, European Union strives towards sustainable management of plastic waste and seeks the ways for its upcycling and production of new fuels and chemicals. As an answer to the presented challenges, the present experimental study addresses the potential for use of chemically stabilized Waste Plastics Oil (WPO), a product of pyrolysis process of waste plastics in a Reactivity Controlled Compression Ignition (RCCI) combustion concept. To establish a reactivity-controlled combustion, the study uses a combination of methane (a model fuel for biomethane) and WPO to a) simultaneously reduce NOx and particulate matter emissions due to low local combustion temperatures and a high degree of charge homogenization and b) address waste and carbon footprint reduction challenges. Through experiments, influence of direct injection timing and energy shares of utilized fuels to in-cylinder thermodynamic parameters and engine emission response were evaluated in engine operating points at constant indicated mean effective pressure. Acquired results were deeply investigated and benchmarked against compression ignition (CI) and RCCI operation with conventional diesel fuel to determine potential for WPO utilization in an advanced low-temperature combustion concept. Results show that chemically stabilized WPO can be efficiently utilized in RCCI combustion concept without adaptation of injection parameters and that with suitable control parameters, ultra-low emissions of NOx and PM can be achieved with utilized fuels. For diesel/methane mix, NOx and PM emissions were reduced compared to conventional CI operation for 82.0% and 93.2%, respectively, whereas for WPO/methane mix, NOx and PM emissions were reduced for 88.7% and 97.6%, respectively, which can be ascribed to favourable chemical characteristics of WPO for the utilized combustion concept. In the least favourable operating point among those studied, indicated mean effective pressure covariance was kept below 2.5%, which is well below 5% being considered the limit for stable engine operation.

Transport and acceleration mechanism of fast ions during edge localized modes in ASDEX Upgrade

Observations of enhanced fast-ion losses during edge localized modes (ELMs) have been reported in the ASDEX Upgrade tokamak, revealing losses above the injection energy. This suggests that fast ions can be accelerated and lost due to the ELMs. Recent analysis of the ELM-induced losses suggests that the fast ions are lost due to a resonant interaction with the electromagnetic perturbation during the ELM crash. The fast-ion transport and acceleration during ELMs is modelled using electromagnetic fields computed using the hybrid kinetic-MHD code MEGA, while fast-ion full orbits are tracked with the ASCOT code. Time-evolving 3D electromagnetic fields have been implemented in ASCOT to compute fast-ion orbits in the presence of fast MHD events such as ELMs. The simulations successfully reproduce a field-aligned pattern of the losses on the tokamak wall and the formation of an accelerated population in the lost fast-ion distribution, while they predict an accelerated population in the confined distribution. A parametric study of the fast-ion constants of motion suggests a resonant interaction between the fast-ions and the electromagnetic fields arising during the ELM crash. In the case of fast-ion acceleration, the perpendicular electric perturbation, with scales smaller than the fast-ion gyroradius, breaks magnetic moment conservation and resonantly modifies the fast-ion energy.

Electron acceleration by wakefield generated by the propagation of chirped laser pulse in plasma

A study of generation of wakefield and particle acceleration via propagation of linearly polarised, chirped, Gaussian laser pulse in preformed plasma channel is presented. Perturbation technique is used to separate slow and fast varying plasma electron velocities and density. Considering the laser pulse length and amplitude to be evolving along the propagation distance, nonlinear fluid equations are used to derive longitudinal electric wakefields at varying propagation distances for chirped as well as unchirped pulses. It has been seen that longitudinal wakefield amplitude generated by positively (negatively) chirped laser pulses is higher (lower) than the amplitude obtained by unchirped laser pulses. The wakefield amplitudes are optimized with respect to the propagation distance. Further, trapping and acceleration of electrons by the generated wakes, is analysed. Comparing the energy of an accelerated test electron using chirped and unchirped laser pulses, it is shown that positively chirped laser pulses are capable of accelerating test electron to maximum energy using minimum injection energy. Hence, highest energy gain can be obtained by propagation of positively chirped laser pulse in plasma.

TCV Tokamak Neutron Shielding Upgrade for Dual NBI Operation

The Tokamak à Configuration variable (TCV) is equipped with two neutral beam injection (NBI) systems delivering up to 1.2 MW each for pulse durations of up to 2 s. The first system (NBI1), designed for an injection energy in the range of 25 to 30 keV has been operational since 2016. The existing concrete neutron shielding of the experimental hall proved insufficient for fully protecting human accessible areas, limiting the number of daily plasma pulses using NBI1. The recently commissioned second system (NBI2) is designed for injection synergies in the range 50 to 60 keV. Both systems are tangentially oriented in opposite directions in order to permit experiments with low or no net torque. Calculations with the TRANSP and ORBIS heating codes show that neutron rates from deuterium-deuterium fusion reactions may be as high as 1014 n/s, up to 10 times higher than with the lower energy beam only. This is due both to the ~five times larger beam-plasma neutron rates from the higher energy beam and to an exceptionally high contribution from beam-beam reactions between the opposing beams. The radiation protection policy at the Swiss Plasma Center is that all staff members be considered as members of the general public, limiting the daily personal dose to 4 µSv. This is also the maximum admissible daily dose in any publicly accessible zone, whether occupied or not. Currently, with only the lower energy beam, this limit can be attained in the control room adjacent to the device hall after only five NBI pulses out of a possible 30 daily pulses. To allow for exploitation of the two beams at full specifications, the source side of the existing barite concrete walls of the 15 × 20 × 8 m large TCV hall will be covered with 20-cm-thick polythene (PE) cladding and a ceiling made of 35-cm-thick PE will be added. The total mass of PE will be 200 tons. The usage of PE at this scale for neutron shielding is unprecedented at any fusion research facility.

Accelerated Damage in Metallized Film Capacitors Under Pulse Surge Combined With Rated DC Voltage

Metallized film capacitors (MFCs) have good self-healing performance and are widely used in pulsed power supplies, power systems, and aerospace equipment. The self-healing time of MFCs is often in the order of microseconds. When the pulsewidth of overvoltage is close to the self-healing time, MFCs are at risk of insulation failure. In this article, self-healing energy and time under pulse surge combined with rated dc voltage are investigated by analyzing the effect of the number of applied pulses on the capacitance loss, dielectric loss, and equivalent series resistance (ESR) of MFC. The correlation between the number of applied pulses and the capacitance loss of MFC at different repetition frequencies, pulse components, and temperatures is studied, fitting the 5% turning points of capacitance loss. The experimental results show that the multiple types of self-healing occur in an active period of one pulse under microsecond overvoltage. According to the level of injection energy and several typical waveforms from voltage and current, the self-healing process of MFC can be classified into effective self-healing, disruptive self-healing, and fatal self-healing. When effective self-healing occurs in the MFC, the performances remain stable for a certain time. As the number of tolerated pulses increases, disruptive self-healing and fatal self-healing significantly decrease capacitance value but increase dielectric loss and ESR.

4D and 5D phase-space tomography using slowing-down physics regularization

We compute reconstructions of 4D and 5D fast-ion phase-space distribution functions in fusion plasmas from synthetic projections of these functions. The fast-ion phase-space distribution functions originating from neutral beam injection (NBI) at TCV and Wendelstein 7-X (W7-X) at full, half, and one-third injection energies can be distinguished and particle densities of each component inferred based on 20 synthetic spectra of projected velocities at TCV and 680 at W7-X. Further, we demonstrate that an expansion into a basis of slowing-down distribution functions is equivalent to regularization using slowing-down physics as prior information. Using this technique in a Tikhonov formulation, we infer the particle density fractions for each NBI energy for each NBI beam from synthetic measurements, resulting in six unknowns at TCV and 24 unknowns at W7-X. Additionally, we show that installing 40 LOS in each of 17 ports at W7-X, providing full beam coverage and almost full angle coverage, produces the highest quality reconstructions.