Initiation Elongation Research Articles

Efficacy in myopia control-The impact of rebound.

When myopia control treatment is discontinued, progression will increase, but does it revert to expected values based on the age and race of the child or does it accelerate further? The latter scenario is considered a rebound. A PubMed search was conducted with the words 'rebound' and 'myopia control', identifying further papers from reviews. Inclusion was limited to prospective studies with ≥6 months of treatment, ≥3 months of data following cessation and with axial length data, which allowed calculation of rebound. Nineteen studies were identified, comprising 24 treatment groups. In 10 studies, untreated control children were followed both throughout the treatment and cessation periods, allowing for a concurrent comparison group. In three studies, a control group was followed for 1 or 2 years and thereafter received the treatment under evaluation. Later, treatment ceased in the originally treated children. Finally, six studies were cross-over designs. For these latter two study designs, initial axial elongation and myopia progression in the control group were extrapolated to the cessation period, accounting for annual slowing. Values from durations of <1 year were annualised. The mean annualised rebound was +0.05 ± 0.10 mm and -0.09 ± 0.24 D for axial length and myopia progression, respectively, and these were correlated (r2 = 0.59, p < 0.001). Rebound was associated with 1-year treatment efficacy (r2 = 0.43, p < 0.001). The mean annualised rebound with optical corrections was -0.01 ± 0.03 mm. Five of the six highest rebound values (≥0.14 mm) were from red light therapy and atropine studies. Rebound ranged from +0.03 to +0.14 mm for overnight orthokeratology. Consistent with previous statements, no evidence for rebound was found for myopia control spectacles and soft contact lenses. Future research should explore the influence of age and magnitude of treatment efficacy on rebound.

Of tusks and trunks: A review of craniofacial evolutionary anatomy in elephants and extinct Proboscidea.

While being the largest living terrestrial mammals, elephants are best known for their highly modified and uniquely elaborate craniofacial anatomy-most notably with respect to their often-massive tusks and intricately muscular, multifunctional proboscis (i.e., trunk). For over a century, studies of extinct proboscidean relatives of today's elephants have presented hypotheses regarding the evolutionary history of the crania and tusks of these animals and their bearing on the evolution of the proboscis. Herein, I explore major functional characteristics of the proboscidean head. I give a brief review of the anatomy of tusks and dentition, the feeding apparatus, and proboscis in extant elephants and explore their overall bearing in elephant feeding behavior as well as other aspects of their ecology. I also review the evolution of the proboscidean head, with a synthetic analysis of studies and further speculation exploring the interconnected evolutionary roles of tusk morphology and use, feeding anatomy and functional implications thereof, and proboscis anatomy and use in the ancestry of elephants. Notable emphasis is given to the evolutionary role of initial elongation of the mandibular symphysis in the development of the proboscis in many proboscideans. Subsequent secondary shortening of the symphysis and elevation of the temporal region and occiput allowed for a pendulous trunk and proal feeding in living elephants and other proboscidean groups with highly lophodont dentition.

Modeling thermal-induced wellhead growth through the lifecycle of a well

During production from high-yield wells, hot reservoir fluids may significantly heat the casing string which may lead to the wellhead growing out of the surface once the induced thermal stress exceeds the wellhead load. This issue involves some challenges that lie in the initial gravity-driven elongation of casing strings before cementing and then their combined expansion with annular cement as one assembly due to later temperature changes. Here, we proposed an integrated modeling method for wellhead growth by incorporating heat transfer and thermodynamics. Element-death technique is used to simulate free elongation of the casings in the absence of cement before cementing and their subsequent coupling thermomechanical behavior with cement after cementing job. Arbitrary Lagrange-Eulerian (ALE) adaptive meshing is employed to avoid mesh distortion due to uncoordinated deformation between casings and cements. Numerical results indicate that the combined effect of gravitational-induced tensile strain and thermal-induced compressive strain may potentially result in a strain-neutral point within the casing. Beyond this point, the casing experiences a tensile state, whereas, below it, the casing is subjected to a compressive state. Furthermore, casing running friction can mitigate tensile strain, while higher production can enhance the thermal strain in the casing. Both factors contribute to shifting the strain neutral point upwards and exacerbating the risk of wellhead growth. However, the application of pre-tensioned casing while cementing can effectively mitigate wellhead growth by offsetting the thermal-induced compressive strain through the increasing tensile strain.

Uncoupling the TFIIH Core and Kinase Modules Leads To Misregulated RNA Polymerase II CTD Serine 5 Phosphorylation.

TFIIH is an essential transcription initiation factor for RNA polymerase II (RNApII). This multi-subunit complex comprises two modules that are physically linked by the subunit Tfb3 (MAT1 in metazoans). The TFIIH Core Module, with two DNA-dependent ATPases and several additional subunits, promotes DNA unwinding. The TFIIH Kinase Module phosphorylates Serine 5 of the C-terminal domain (CTD) of RNApII subunit Rpb1, a modification that coordinates exchange of initiation and early elongation factors. While it is not obvious why these two disparate activities are bundled into one factor, the connection may provide temporal coordination during early initiation. Here we show that Tfb3 can be split into two parts to uncouple the TFIIH modules. The resulting cells grow slower than normal, but are viable. Chromatin immunoprecipitation of the split TFIIH shows that the Core Module, but not the Kinase, is properly recruited to promoters. Instead of the normal promoter-proximal peak, high CTD Serine 5 phosphorylation is seen throughout transcribed regions. Therefore, coupling the TFIIH modules is necessary to localize and limit CTD kinase activity to early stages of transcription. These results are consistent with the idea that the two TFIIH modules began as independent functional entities that became connected by Tfb3 during early eukaryotic evolution.

Post-printing processing and aging effects on Polyjet materials intended for the fabrication of advanced surgical simulators

Material Jetting (MJ) 3D printing technology is promising for the fabrication of highly realistic surgical simulators, however, the changes in the mechanical properties of MJ materials after post-printing treatments and over time remain quite unknown.In this study, we investigate the effect of different post-printing processes and aging on the mechanical properties of a white opaque and rigid MJ photopolymer, a white flexible MJ photopolymer and on a combination of them. Tensile and Shore hardness tests were conducted on homogeneous 3D-printed specimens: two different post-printing procedures for support removal (dry and water) and further surface treatment (with glycerol solution) were compared. The specimens were tested within 48 h from printing and after aging (30–180 days) in a controlled environment.All groups of specimens treated with different post-printing processes (dry, water, glycerol) exhibited a statistically significant difference in mechanical properties (i.e. elongation at break, elastic modulus, ultimate tensile strength). Particularly, the treatment with glycerol makes the flexible photopolymer more rigid, but then with aging the initial elongation of the material tends to be restored. For the rigid photopolymer, an increase in deformability was observed as a major effect of aging. The hardness tests on the printed specimens highlighted a significant overestimation of the Shore values declared by the manufacturer. The study findings are useful for guiding the material selection and post-printing processing techniques to manufacture realistic and durable models for surgical training.

JNJ-7184, a respiratory syncytial virus inhibitor targeting the connector domain of the viral polymerase

Respiratory syncytial virus (RSV) can cause pulmonary complications in infants, elderly and immunocompromised patients. While two vaccines and two prophylactic monoclonal antibodies are now available, treatment options are still needed. JNJ-7184 is a non-nucleoside inhibitor of the RSV-Large (L) polymerase, displaying potent inhibition of both RSV-A and -B strains. Resistance selection and hydrogen-deuterium exchange experiments suggest JNJ-7184 binds RSV-L in the connector domain. JNJ-7184 prevents RSV replication and transcription by inhibiting initiation or early elongation. JNJ-7184 is effective in air-liquid interface cultures and therapeutically in neonatal lambs, acting to drastically reverse the appearance of lung pathology.

Experimental Assessment of Mechanical Properties of Corroded Low–Alloy Structural Steel

This study investigates the mechanical properties of corroded Q355B structural steel subjected to a simulated marine atmosphere and an industrial atmosphere. The micro-morphology of corroded steel in two different environments was analyzed by SEM (scanning electron microscopy). Tension tests were performed to determine the degradation laws of the mechanical properties of corroded steel, including its yield strength, ultimate strength, elastic modulus, ultimate strain and elongation after fracture. The test results indicate that the elongation after fracture of the steel is the most severely deteriorated property after corrosion. The recommended empirical formula for limiting the maximum corrosion rate is established. It is found that when the initial elongation is 30%, the maximum allowable corrosion rate is 19.2%. Based on the achieved results, a simplified time-dependent stress–strain model of Q355B structural steel is established considering the coupling effects of corrosive environments and applied stress, which is also evaluated using relevant research. In addition, axial compression tests were conducted on corroded square stud columns to verify the effectiveness of the established model. It is indicated that the model can be used for fitness-for-purpose analyses in structural integrity assessments.

GhWER controls fiber initiation and early elongation by regulating ethylene signaling pathway in cotton (Gossypium hirsutum).

The online version contains supplementary material available at 10.1007/s11032-024-01477-6.

Histological and single-nucleus transcriptome analyses reveal the specialized functions of ligular sclerenchyma cells and key regulators of leaf angle in maize

Leaf angle (LA) is a crucial factor that affects planting density and yield in maize. However, the regulatory mechanisms underlying LA formation remain largely unknown. In this study, we performed a comparative histological analysis of the ligular region across various maize inbred lines and revealed that LA is significantly influenced by a two-step regulatory process involving initial cell elongation followed by subsequent lignification in the ligular adaxial sclerenchyma cells (SCs). Subsequently, we performed both bulk and single-nucleus RNA sequencing, generated a comprehensive transcriptomic atlas of the ligular region, and identified numerous genes enriched in the hypodermal cells that may influence their specialization into SCs. Furthermore, we functionally characterized two genes encoding atypical basic-helix–loop–helix (bHLH) transcription factors, bHLH30 and its homolog bHLH155, which are highly expressed in the elongated adaxial cells. Genetic analyses revealed that bHLH30 and bHLH155 positively regulate LA expansion, and molecular experiments demonstrated their ability to activate the transcription of genes involved in cell elongation and lignification of SCs. These findings highlight the specialized functions of ligular adaxial SCs in LA regulation by restricting further extension of ligular cells and enhancing mechanical strength. The transcriptomic atlas of the ligular region at single-nucleus resolution not only deepens our understanding of LA regulation but also enables identification of numerous potential targets for optimizing plant architecture in modern maize breeding.

Transgressive and subgenome expression level dominance and co-expression network analyses at the early fiber development in allopolyploid Gossypium

Polyploidization can lead to the emergence of new species. Allotetraploid cotton arose through hybridization and whole genome duplication of its diploid A and D genome progenitors. As a prominent global fiber crop, cotton serves as an excellent model organism for exploring plant evolutionary biology and fiber development, particularly in polyploidization. This study utilized transcriptomics to analyze expression difference between diploid and allotetraploid cotton, aiming to further the understanding of transcriptomic dynamics associated at different fiber developmental stages during polyploidization process. In this study, we identified additive and non-additive genes and clarified the contributions of non-additive genes during the tetraploid formation process. Furthermore, we constructed a gene co-expression network, providing new insights into the transcriptional regulation of polyploid cotton fiber development. Among non-additive genes, more A genome-biased expression level dominance (ELD-A) than D genome (ELD-D) occurred in the tetraploids. In Gossypium hirsutum, ELD-A genes played major roles during initial elongation, exerting greater dominance in fiber development. Transgressive genes impacted early fiber development in Gossypium barbadense. While the At subgenome profoundly influences tetraploid fiber development, Dt sub-genome activation, inheritance and sub/neo-functionalization promote superior high-yield traits. By constructing co-expression networks, we identified key fiber developmental candidate genes, providing valuable resources for functional research and breeding perspectives to develop superior cotton varieties.

Methionyl-tRNA synthetase synthetic and proofreading activities are determinants of antibiotic persistence.

Bacterial antibiotic persistence is a phenomenon where bacteria are exposed to an antibiotic and the majority of the population dies while a small subset enters a low metabolic, persistent, state and are able to survive. Once the antibiotic is removed the persistent population can resuscitate and continue growing. Several different molecular mechanisms and pathways have been implicated in this phenomenon. A common mechanism that may underly bacterial antibiotic persistence is perturbations in protein synthesis. To investigate this mechanism, we characterized four distinct metG mutants for their ability to increase antibiotic persistence. Two metG mutants encode changes near the catalytic site of MetRS and the other two mutants changes near the anticodon binding domain. Mutations in metG are of particular interest because MetRS is responsible for aminoacylation both initiator tRNAMet and elongator tRNAMet indicating that these mutants could impact translation initiation and/or translation elongation. We observed that all the metG mutants increased the level of antibiotic persistence as did reduced transcription levels of wild type metG. Although, the MetRS variants did not have an impact on MetRS activity itself, they did reduce translation rates. It was also observed that the MetRS variants affected the proofreading mechanism for homocysteine and that these mutants' growth is hypersensitive to homocysteine. Taken together with previous findings, our data indicate that both reductions in cellular Met-tRNAMet synthetic capacity and reduced proofreading of homocysteine by MetRS variants are positive determinants for bacterial antibiotic persistence.

121 Unraveling the biology of bovine conceptus elongation

Abstract The establishment of pregnancy is a well-regulated process that involves the development of a viable blastocyst, conceptus elongation, maternal recognition of pregnancy, implantation, and the onset of placentation. Pregnancy loss is a major factor limiting reproductive efficiency in livestock species. In cattle, most embryonic losses occur during the first month of gestation. The genetic and epigenetic regulation of embryonic and placental development in ruminants is still poorly understood. To investigate the transcriptome profile of the bovine conceptus during elongation, Angus heifers (n = 8) were superovulated and bred using semen from a proven high-fertility Bos indicus sire. Heifers were flushed on d 14 of gestation using a standard nonsurgical flushing technique. Recovered conceptuses were individually photographed and snap-frozen for total RNA extraction and bulk mRNA sequencing. Recovered conceptuses were classified based on size into ovoid (0.2 – 5mm; n = 6), tubular (&amp;lt;15 mm; n = 7), or filamentous (&amp;gt;16 mm; n = 7). Differentially expressed genes (DEG: FDR &amp;lt; 0.05) were determined using DESeq2 analysis and were functionally annotated using DAVID. The most pronounced transcriptomic changes were identified between the ovoid and tubular stages, with 5,937 DEGs (2,913 upregulated and 3,024 downregulated) and affected pathways were primarily involved in ribosome assembly and rRNA processing. There were 3,966 DEGs (2,069 upregulated and 1,897 downregulated) between the ovoid and filamentous stages, and the most significant pathways were involved in protein translation, embryonic development, and cell cycle. The transition between tubular to filamentous presented 1,435 DEGs (775 upregulated and 660 downregulated) and significant pathways were involved in protein degradation, cell division, cell cycle, protein stabilization, and mRNA splicing. Our findings indicate that the greatest alterations in the transcriptome occur precisely at the initiation of elongation, suggesting that the bovine conceptus undergoes major structural changes at the outset of this process. This major shift in gene expression is presumed to be necessary to support the subsequent exponential growth phase of elongation, required for maternal recognition of pregnancy.

Analyzing the correlation between protein expression and sequence-related features of mRNA and protein in Escherichia coli K-12 MG1655 model.

It was necessary to have a tool that could predict the amount of protein and optimize the gene sequences to produce recombinant proteins efficiently. The Transim model published by Tuller et al. in 2018 can calculate the translation rate in E. coli using features on the mRNA sequence, achieving a Spearman correlation with the amount of protein per mRNA of 0.36 when tested on the dataset of operons' first genes in E. coli K-12 MG1655 genome. However, this Spearman correlation was not high, and the model did not fully consider the features of mRNA and protein sequences. Therefore, to enhance the prediction capability, our study firstly tried expanding the testing dataset, adding genes inside the operon, and using the microarray of the mRNA expression data set, thereby helping to improve the correlation of translation rate with the amount of protein with more than 0.42. Next, the applicability of 6 traditional machine learning models to calculate a "new translation rate" was examined using initiation rate and elongation rate as inputs. The result showed that the SVR algorithm had the most correlated new translation rates, with Spearman correlation improving to R = 0.6699 with protein level output and to R = 0.6536 with protein level per mRNA. Finally, the study investigated the degree of improvement when combining more features with the new translation rates. The results showed that the model's predictive ability to produce a protein per mRNA reached R = 0.6660 when using six features, while the correlation of this model's final translation rate to protein level was up to R = 0.6729. This demonstrated the model's capability to predict protein expression of a gene, rather than being limited to predicting expression by an mRNA and showed the model's potential for development into gene expression predicting tools.

Rapid In Vitro Regeneration and Genetic Fidelity Assessment of Regenerated Plants in Ayapana Triplinervis (Vahl) R.M. King &amp; H. Robinson: An Ethnomedicinal and Ornamental Herb

Background: Ayapana triplinervis is a popular ethnomedicinal and ornamental plant species. Due to its high medicinal importance, A. triplinervis was recently documented in the French Pharmacopeia. Objective: Rapid and efficient tissue culture protocol development is crucial for the high production and biotechnological applications of this plant. Methods: In this study, an efficient tissue culture protocol was developed for plant regeneration using nodal explants of A. triplinervis. The nodal explants were treated in Murashige and Skoog’s (MS) medium supplemented with various individual concentrations of cytokinins (BAP and KIN) and auxins (IAA and IBA). The nodal explant was regenerated in three different steps: (1) initial shoot induction, (2) shoot multiplication and elongation, and (3) rooting. Results: The results revealed that all individual concentrations (10, 20, 30, or 40 mg/L) of BAP or KIN responded to induce shoot initiation. The highest shoot multiplication and elongation were achieved in the MS medium with 20 mg/L BAP and 20 mg/L KIN. The regenerated plantlets produced better roots on MS medium containing 1.0 mg/L of each IAA or IBA. The well-established rooted plantlets were maintained in the culture room and greenhouse for better acclimatization and achieved a 100% survival rate. We analyzed the genetic fidelity of in vitro regenerated plants using random amplified polymorphic DNA (RAPD) markers. No genetic polymorphisms were observed in vitro plants compared to the mother plants. Conclusion: This efficient protocol could benefit future biotechnological applications like mass multiplication, genetic transformation and gene editing for improving the bioactive molecules in A. triplinervis.

Dynamic Phytomeric Growth Contributes to Local Adaptation in Barley.

Vascular plants have segmented body axes with iterative nodes and internodes. Appropriate node initiation and internode elongation are fundamental to plant fitness and crop yield; however, how these events are spatiotemporally coordinated remains elusive. We show that in barley (Hordeum vulgare L.), selections during domestication have extended the apical meristematic phase to promote node initiation, but constrained subsequent internode elongation. In both vegetative and reproductive phases, internode elongation displays a dynamic proximal-distal gradient, and among subpopulations of domesticated barleys worldwide, node initiation and proximal internode elongation are associated with latitudinal and longitudinal gradients, respectively. Genetic and functional analyses suggest that, in addition to their converging roles in node initiation, flowering-time genes have been repurposed to specify the timing and duration of internode elongation. Our study provides an integrated view of barley node initiation and internode elongation and suggests that plant architecture should be recognized as a collection of dynamic phytomeric units in the context of crop adaptive evolution.

Mechanical response of human thoracic spine ligaments under quasi-static loading: An experimental study

PurposeThis study aimed to investigate the geometrical and mechanical properties of human thoracic spine ligaments subjected to uniaxial quasi-static tensile test. MethodsFour human thoracic spines, obtained through a body donation program, were utilized for the study. The anterior longitudinal ligament (ALL), posterior longitudinal ligament (PLL), capsular ligament (CL), ligamenta flava (LF), and the interspinous ligament and supraspinous ligament complex (ISL + SSL), were investigated. The samples underwent specimen preparation, including dissection, cleaning, and reinforcement, before being immersed in epoxy resin. Uniaxial tensile tests were performed using a custom-designed mechanical testing machine equipped with an environmental chamber (T = 36.6 °C; humidity 95%). Then, the obtained tensile curves were averaged preserving the characteristic regions of typical ligaments response. ResultsGeometrical and mechanical properties, such as initial length and width, failure load, and failure elongation, were measured. Analysis of variance (ANOVA) revealed significant differences among the ligaments for all investigated parameters. Pairwise comparisons using Tukey's post-hoc test indicated differences in initial length and width. ALL and PLL exhibited higher failure forces compared to CL and LF. ALL and ISL + SSL demonstrated biggest failure elongation. Comparisons with other studies showed variations in initial length, failure force, and failure elongation across different ligaments. The subsystem (Th1 – Th6 and Th7 – Th12) analysis revealed increases in initial length, width, failure force, and elongation for certain ligaments. ConclusionsVariations of both the geometric and mechanical properties of the ligaments were noticed, highlighting their unique characteristics and response to tensile force. Presented results extend very limited experimental data base of thoracic spine ligaments existing in the literature. The obtained geometrical and mechanical properties can help in the development of more precise human body models (HBMs).

NELF focuses sites of initiation and maintains promoter architecture.

Many factors control the elongation phase of transcription by RNA polymerase II (Pol II), a process that plays an essential role in regulating gene expression. We utilized cells expressing degradation tagged subunits of NELFB, PAF1and RTF1 to probe the effects of depletion of the factors on nascent transcripts using PRO-Seq and on chromatin architecture using DFF-ChIP. Although NELF is involved in promoter proximal pausing, depletion of NELFB had only a minimal effect on the level of paused transcripts and almost no effect on control of productive elongation. Instead, NELF depletion increased the utilization of downstream transcription start sites and caused a dramatic, genome-wide loss of H3K4me3 marked nucleosomes. Depletion of PAF1 and RTF1 both had major effects on productive transcript elongation in gene bodies and also caused initiation site changes like those seen with NELFB depletion. Our study confirmed that the first nucleosome encountered during initiation and early elongation is highly positioned with respect to the major TSS. In contrast, the positions of H3K4me3 marked nucleosomes in promoter regions are heterogeneous and are influenced by transcription. We propose a model defining NELF function and a general role of the H3K4me3 modification in blocking transcription initiation.

Design and Execution of In Vitro Polymerase Assays for Measles Virus and Related Mononegaviruses.

Morbilliviruses such as measles virus (MeV) are responsible for major morbidity and mortality worldwide, despite the availability of an effective vaccine and global vaccination campaigns. MeV belongs to the mononegavirus order of viral pathogens that store their genetic information in non-segmented negative polarity RNA genomes. Genome replication and viral gene expression are carried out by a virus-encoded RNA-dependent RNA polymerase (RdRP) complex that has no immediate host cell analog. To better understand the organization and regulation of the viral RdRP and mechanistically characterize antiviral candidates, biochemical RdRP assays have been developed that employ purified recombinant polymerase complexes and synthetic RNA templates to monitor the initiation of RNA synthesis and RNA elongation in vitro. In this article, we will discuss strategies for the efficient expression and preparation of mononegavirus polymerase complexes, provide detailed protocols for the execution and optimization of RdRP assays, evaluate alternative options for the choice of template and detection system, and describe the application of the assay for the characterization of inhibitor candidates. Although MeV RdRP assays are the focus of this article, the general strategies and experimental approaches are readily transferable to related viruses in the mononegavirus order.

A cotton APS REDUCTASE represses root hair elongation via sulfur assimilation and hydrogen peroxide‐mediated cell wall damage

AbstractSulfur is a critical element for plant growth and development, and it is assimilated through a pathway called the sulfur assimilation pathway. APS REDUCTASE (APR) is a key rate‐limiting enzyme in this pathway, and it plays a vital role in regulating sulfur flow and plant development. However, the exact role and mechanism of APR in cotton fiber and root hair development are still not fully understood. This study used in vitro cultured ovules grown on a sulfur‐deficient medium to explore the role of sulfur in fiber development. Genetic approaches such as virus‐induced gene silencing (VIGS) was used to determine the role of target genes. In vitro assays revealed the role of sulfur in fiber development and identified GhAPR2 as a key candidate gene. The GhAPR2 negatively regulates fiber cell initiation and Arabidopsis root hair elongation. Further studies demonstrated that overexpression of GhAPR2 increased the contents of sulfite and GSH to enhance sulfur assimilation in Arabidopsis, leading to abnormal accumulation of ROS in root hair. This down‐regulates the transcription of proline‐rich cell wall protein‐coding genes such as AtEXTs and AtPRPs, reducing the content of hydroxyproline in the cell wall, disrupting the development of the root hair cell wall, and inhibiting root hair elongation. This study elucidated the functional pathway of APR2 in the regulation of root hair development. APR2 first affects sulfur assimilation, which affects the content of reactive oxygen species (ROS), and finally affects the content of hydroxyproline‐rich glycoprotein, which in turn affects the development of root hair. This model also contributes to the understanding of the role of sulfur in fiber development, as well as cell differentiation and development.

Structural and functional analysis of the minimal orthomyxovirus-like polymerase of Tilapia Lake Virus from the highly diverged Amnoonviridae family

Tilapia Lake Virus (TiLV), a recently discovered pathogen of tilapia fish, belongs to the Amnoonviridae family from the Articulavirales order. Its ten genome segments have characteristic conserved ends and encode proteins with no known homologues, apart from the segment 1, which encodes an orthomyxo-like RNA-dependent-RNA polymerase core subunit. Here we show that segments 1–3 encode respectively the PB1, PB2 and PA-like subunits of an active heterotrimeric polymerase that maintains all domains found in the distantly related influenza polymerase, despite an unprecedented overall size reduction of 40%. Multiple high-resolution cryo-EM structures of TiLV polymerase in pre-initiation, initiation and active elongation states, show how it binds the vRNA and cRNA promoters and performs RNA synthesis, with both transcriptase and replicase configurations being characterised. However, the highly truncated endonuclease-like domain appears inactive and the putative cap-binding domain is autoinhibited, emphasising that many functional aspects of TiLV polymerase remain to be elucidated.