Initial Nitrogen Concentration Research Articles

Thermodynamic and Kinetic Analysis of TiN Precipitation in Nickel-Based Superalloys During Solidification

Large TiN inclusions in nickel-based superalloys promote micropore formation, compromising the mechanical properties of the alloys. However, current research lacks a comprehensive coupled model that considers both solute element microsegregation and TiN precipitation specifically in nickel-based superalloys. This study investigated TiN precipitation during the solidification of IN718 alloys through a combined thermodynamic and kinetic approach. A modified Clyne–Kurz model was applied to account for multi-element microsegregation, enabling an integrated analysis of both microsegregation and precipitation processes. The results indicated that solute elements in the molten alloy segregated to varying degrees during solidification. At an initial nitrogen concentration of 25 ppm, TiN inclusions precipitated when the solid fraction reached 0.256, eventually resulting in a total TiN precipitation of 64 ppm by the end of solidification, while residual nitrogen in the liquid phase decreased to 1.3 ppm. Increasing the initial nitrogen concentration from 10 ppm to 40 ppm advanced the onset of TiN precipitation and raised the total amount from 16 ppm to 126 ppm. Further analysis indicated that cooling rates of 0.03 °C/s, 0.06 °C/s, and 0.18 °C/s did not significantly affect the final TiN accumulation.

Synergistic management of nitrogen contamination in overflow wastewater and algal proliferation in lake receiving wastewater based on electrochemical oxidation process

Urban lake eutrophication, largely driven by overflow wastewater, plays a pivotal role in precipitating algal proliferation due to heightened nitrogen levels in aquatic ecosystem. In addressing this question, this study investigated the chloride-mediated electrochemical oxidation system as a promising solution for controlling nitrogen contamination in overflow wastewater and inhibiting algal proliferation in wastewater-receiving urban lakes, and also evaluated the influence of essential operational parameters on the performance of system. The results indicated that, under the environmental conditions set by this experiment, the removal efficiency ranges of ammonia nitrogen and total nitrogen were 14.91 % - 100 % and 13.98 % - 99.62 %, respectively; meanwhile, the maximum algae inhibition rate could reach 100 % at a capacity ratio of 0.01. Response Surface Method analysis highlighted current density as the preeminent factor in nitrogen removal and algae inhibition, surpassing the influence of initial chloride ion and nitrogen concentrations within the system. Notably, an excessive current density could inadvertently lead to the nitrate nitrogen accumulation (up to 29 %), thereby diminishing the total nitrogen removal efficiency, particularly in low nitrogen-concentrated overflow wastewater scenarios. With respect to algae inhibition, a direct correlation was identified between higher residual total chlorine concentrations in the receiving lake and increased algae inhibition rates (R = 0.90, P < 0.05), and the residual total chlorine was found to exert pronounced inhibition on cyanobacteria compared to other algal forms. However, caution was advised regarding potential algal growth stimulation if the initial received total chlorine concentration in the urban lake receiving wastewater below 0.5 mg/L. These findings not only affirm the feasibility of this synergistic approach but also elucidate critical aspects for process optimization and control.

Analysis of secondary metabolites and morphology in Streptomyces rimosus microparticle-enhanced cultivation (MPEC) at various initial organic nitrogen concentrations

The influence of talc microparticles on metabolism and morphology of S. rimosus at various initial organic nitrogen concentrations was investigated. The shake flask cultivations were conducted in the media with yeast extract (nitrogen source) concentration equal to 1 g YE L− 1 and 20 g YE L− 1. Two talc microparticle concentrations of 5 g TALC L− 1 and 10 g TALC L− 1 were tested in microparticle-enhanced cultivation (MPEC) runs. A high nitrogen concentration of 20 g YE L− 1 promoted the development of small agglomerates (pellets) of projected area lower than 105 µm2 and dispersed pseudohyphae. A low nitrogen concentration of 1 g YE L− 1 led to the limitation of S. rimosus growth and, in consequence, the development of the smaller number of large pseudohyphal agglomerates (pellets) of projected area higher than 105 µm2 compared to the culture containing a high amount of nitrogen source. In both cases talc microparticles were embedded into pellets and caused the decrease in their sizes. The lower amount of talc (5 g TALC L− 1) usually caused the weaker effect on S. rimosus morphology and metabolite production than the higher one. This correlation between the microparticles effect on morphology and metabolism of S. rimosus was especially noticeable in the biosynthesis of oxytetracycline, 2-acetyl-2-dicarboxamide oxytetracycline (ADOTC) and spinoxazine A. Compared to the control run, in MPEC their levels increased 4-fold, 5-fold and 1.6-fold respectively. The addition of talc also improved the production of 2-methylthio-cis-zeatin, lorneic acid J and milbemycin A3.

Nitrate recovery from groundwater and simultaneous upcycling into single-cell protein using a novel hybrid biological-inorganic system

Nitrate pollution in groundwater is a serious problem worldwide, as its concentration in many areas exceeds the WHO-defined drinking water standard (50 mg/L). Hydrogen-oxidizing bacteria (HOB) are a group of microorganisms capable of producing single-cell protein (SCP) using hydrogen and oxygen. Furthermore, HOB can utilize various nitrogen sources, including nitrate. This study developed a novel hybrid biological-inorganic (HBI) system that coupled a new submersible water electrolysis system driven by renewable electricity with HOB fermentation for in-situ nitrate recovery from polluted groundwater and simultaneously upcycling it together with CO2 into single-cell protein. The performance of the novel HBI system was first evaluated in terms of bacterial growth and nitrate removal efficiency. With 5 V voltage applied and the initial nitrate concentration of 100 mg/L, the nitrate removal efficiency of 85.52 % and raw of 47.71 % (with a broad amino acid spectrum) were obtained. Besides, the HBI system was affected by the applied voltages and initial nitrogen concentrations. The water electrolysis with 3 and 4 V cannot provide sufficient H2 for HOB and the removal of nitrate was 57.12 % and 59.22 % at 180 h, while it reached 65.14 % and 65.42 % at 5 and 6 V, respectively. The nitrate removal efficiency reached 58.40 % and 50.72 % within 180 h with 200 and 300 mg/L initial nitrate concentrations, respectively. Moreover, a larger anion exchange membrane area promoted nitrate removal. The monitored of the determination of different forms of nitrogen indicated that around 60 % of the recovered nitrate was assimilated into cells, and 40 % was bio-converted to N2. The results demonstrate a potentially sustainable method for remediating nitrate contaminant in groundwater, upcycling waste nitrogen, CO2 sequestration and valorization of renewable electricity into food or feed.

Exploring the Effects of Nitrogen Fertilization Management and Soil Factors on the Yield and Quality of Flue-Cured Tobacco in China—A Quantitative Research

Tobacco, a pivotal economic crop in China, faces the challenge of securing high-quality raw materials for its industry due to unbalanced and inefficient nitrogen (N) application. To assess the impact of fertilizer management and soil factors on the yield and quality of flue-cured tobacco (FCT), a meta-analysis was conducted across 82 peer-reviewed research studies. The findings demonstrated that both fertilizer management and soil properties exerted a significantly greater influence on yield (63.13% and 62.05%, respectively) than the proportion of superior and medium tobacco (PSMT) (23.57% and 23.83%, respectively). Multiple models were conducted to analyze the N application rate for maximum yield and PSMT, respectively, resulting in an optimum range from 90 to 100 kg N ha−1. The highest yield and PSMT increments were observed with fertilizer timing (FT) applied twice, a basal fertilizer ratio (BFR) exceeding 50%, and a soil pH below 6.5. The nicotine content escalated with increasing N application rates (NR) and soil nitrogen content, peaking at NR over 120 kg N ha−1 and soil total nitrogen (TN) above 2 g kg−1. Stepwise regression modeling indicated that nicotine content was positively influenced by fertilizer management factors (including NR, fertilizer timing, and BFR), as well as initial soil nitrogen content (AN and TN). However, it was negatively correlated with available potassium (AK). Therefore, the results of this meta-analysis suggest that effective fertilizer management, slightly acidic soils enriched with AK, and lower N supply capacity are crucial for enhancing leaf quality while reducing nicotine content. This approach promises improved economic and environmental returns for the tobacco industry in China.

Estimating aboveground biomass dynamics of wheat at small spatial scale by integrating crop growth and radiative transfer models with satellite remote sensing data

Aboveground biomass (AGB) of plants is an agroecological indicator that can be used to monitor crop growth status and quantify biomass carbon stock in agricultural ecosystems. Although satellite remote sensing data and crop models are widely employed to estimate AGB dynamics, their application in small-scale research plots is often constrained by the unavailability of freely and timely high-resolution satellite imageries and the challenge of acquiring reliable model inputs like initial soil water and nitrogen content. This study integrated a crop growth model (APSIM-Wheat) and radiative transfer model (PROSAIL) to estimate AGB dynamics at a small plot scale (ca. 5 to 20 m2) within variety trials (ca. 1 to 2 ha) by assimilating trial-level remote sensing data into the hybrid APSIM-PROSAIL model. The APSIM-PROSAIL integration, developed by deriving PROSAIL input parameters from APSIM-Wheat output variables, was verified by evaluating its capacity to reproduce trial-level Sentinel-2 (S2) NDVI dynamics across 30 variety trials in 2020. The comparison of the simulated and observed trial-level S2 NDVI dynamics yielded an overall RRMSE of 18.2% (n = 646 observations), suggesting the potential of using observed S2 NDVI dynamics to constrain APSIM-PROSAIL and estimate environment variables in cropping systems. This constraint was subsequently assessed in 28 variety trials in 2021, where APSIM-PROSAIL inversely estimated unknown trial-specific variables including initial soil water and nitrogen content across the trials. Using the estimated initial soil status and the plot information including genotypes and management as sown, we demonstrated that this method could also facilitate accurate retrievals of plot-level AGB dynamics with an overall RRMSE of 20.9% (n = 976 measurements). The proposed APSIM-PROSAIL demonstrated the capability to accurately retrieve plot-level AGB dynamics and reproduce trial-level S2 NDVI dynamics across a broad and diverse range of variety trials in the Australian Wheatbelt, indicating its potential utility to facilitate biomass carbon stock assessment. It holds the potential as a tool to explore the relationships between canopy spectral information and crop traits in response to genotype-environment-management interactions in agricultural ecosystems. The method enables the examinations of within-field variabilities for crop traits through retrieving them at small spatial scales from coarse remote sensing data.

Preparation and Performance Verification of a Solid Slow-Release Carbon Source Material for Deep Nitrogen Removal in Urban Tailwater.

Urban tailwater typically has a low carbon-to-nitrogen ratio and adding external carbon sources can effectively improve the denitrification performance of wastewater. However, it is difficult to determine the dosage of additional carbon sources, leading to insufficient or excessive addition. Therefore, it is necessary to prepare solid slow-release carbon source (SRC) materials to solve the difficulty in determining the dosage of carbon sources. This study selected two SRCs of slow-release carbon source 1 (SRC1) and slow-release carbon source 2 (SRC2), with good slow-release performance after static carbon release and batch experiments. The composition of SRC1 was: hydroxypropyl methylcellulose/disodium fumarate/polyhydroxy alkanoate (HPMC/DF/PHA) at a ratio of 3:2:4, with an Fe3O4 mass fraction of 3%. The composition of SRC2 was: HPMC/DF/PHA with a ratio of 1:1:1 and an Fe3O4 mass fraction of 3%. The fitted equations of carbon release curves of SRC1 and SRC2 were y = 61.91 + 7190.24e-0.37t and y = 47.92 + 8770.42e-0.43t, respectively. The surfaces of SRC1 and SRC2 had a loose and porous morphological structure, which could increase the specific surface area of materials and be more conducive to the adhesion and metabolism of microorganisms. The experimental nitrogen removal by denitrification with SRCs showed that when the initial total nitrogen concentration was 40.00 mg/L, the nitrate nitrogen (NO3--N) concentrations of the SRC1 and SRC2 groups on the 10th day were 2.57 and 2.66 mg/L, respectively. On the 20th day, the NO3--N concentrations of the SRC1 and SRC2 groups were 1.67 and 2.16 mg/L, respectively, corresponding to removal efficiencies of 95.83% and 94.60%, respectively. The experimental results indicated that SRCs had a good nitrogen removal effect. Developing these kinds of materials can provide a feasible way to overcome the difficulty in determining the dosage of carbon sources in the process of heterotrophic denitrification.

Nitrogen-Rich Sewage Sludge Mineralized Quickly, Improving Lettuce Nutrition and Yield, with Reduced Risk of Heavy Metal Contamination of Soil and Plant Tissues

Sewage sludge should primarily find use in agriculture, reducing the quantity directed towards alternative disposal methods like incineration or deposition in municipal landfills. This study evaluated the agronomic value and the risk of soil and plant tissue contamination with heavy metals in sewage sludge obtained from two wastewater treatment plants (WWTP). The experiment was arranged as a 2 × 5 factorial (two sewage sludges, five sanitation treatments), involving lettuce cultivation in pots over two growing cycles. The two sewage sludges were sourced from the WWTPs of Gelfa and Viana do Castelo and underwent five sanitation and stabilization treatments (40% and 20% calcium oxide, 40% and 20% calcium hydroxide, and untreated sewage sludge). The Gelfa sewage sludge, characterized by a higher initial nitrogen (N) concentration, resulted in greater dry-matter yield (DMY) (12.4 and 8.6 g plant−1 for the first and second growing cycles, respectively) compared to that from Viana do Castelo (11.0 and 8.1 g plant−1), with N release likely being a major factor influencing crop productivity. The high N concentration and the low carbon (C)/N ratio of sewage sludge led to rapid mineralization of the organic substrate, which additionally led to a higher release of other important nutrients, such as phosphorus (P) and boron (B), making them available for plant uptake. Alkalizing treatments further stimulated sewage sludge mineralization, increasing soil pH and exchangeable calcium (Ca), thereby enhancing Ca availability for plants, and indicating a preference for use in acidic soils. Cationic micronutrients were minimally affected by the sewage sludge and their treatments. The concentrations of heavy metals in the sewage sludge, soils, and lettuce tissues were all below internationally established threshold limits. This study highlighted the high fertilizing value of these sewage sludges, supplying N, P, and B to plants, while demonstrating a low risk of environmental contamination with heavy metals. Nevertheless, the safe use of sewage sludge by farmers depends on monitoring other risks, such as toxic organic compounds, which were not evaluated in this study.

Study on the purification mechanism for ammonia nitrogen in micro-polluted rivers by herbaceous plant - Rumex japonicus Houtt

Water eutrophication caused by nitrogen pollution is an urgent global issue that requires attention. The Qingyi River is a typical micro-polluted river in China. In this study, we took this river as the research object to investigate the nitrogen pollution purification capacity of a herbaceous plant, Rumex japonicus Houtt. (RJH). Compared to nitrate nitrogen (NO3−-N) and nitrite nitrogen (NO2−-N), RJH showed better purification performance on total nitrogen (TN), total phosphorus (TP) and ammonia nitrogen (NH4+-N), with a highest removal rate of 37.22%, 52.13%, and 100%, respectively. RJH could completely remove ammonia nitrogen and exhibit excellent resistance to pollutant interference when the initial concentration of ammonia nitrogen in the cultivation devices increased from 1 mg/L to 10 mg/L or in the actual river. This indicated the great application potential of RJH in ammonia nitrogen removal from natural micro-polluted rivers. In addition, combined effects of nitrification of roots, absorption of self-growth, stripping, and others contributed to nitrogen removal by RJH. Particularly, the nitrification of roots played a dominant role, accounting for 73.85% ± 8.79%. High-throughput sequencing results indicate that nitrifying bacteria accounted for over 75% of all bacterial species in RJH. Furthermore, RJH showed good growth status and strong adaptability. The correlation coefficients of its relative growth rate with chlorophyll A and the degradation rate of absorption were 0.9677 and 0.9594, respectively. Our research demonstrates that RJH is one of the excellent varieties for ammonia removal. This provides a very promising and sustainable method for purifying micro-polluted rivers.

Climate, litter quality and radiation duration jointly regulate the net effect of UV radiation on litter decomposition

Photodegradation via ultraviolet (UV) radiation is an important factor driving plant litter decomposition. Despite increasing attention to the role of UV photodegradation in litter decomposition, the specific impact of UV radiation on the plant litter decomposition stage within biogeochemical cycles remains unclear at regional and global scales. To clarify the variation rules of magnitude of UV effect on plant litter decomposition and their regulatory factors, we conducted a meta-analysis based on 54 published papers. Our results indicated that UV significantly promoted the mass loss of litter by facilitating decay of carbonaceous fractions and release of nitrogen and phosphorus. The promotion effect varied linearly or non-linearly with the time that litter exposed to UV, and with climatic factors. The UV effect on litter decomposition decreased first than increased on precipitation and temperature gradients, reaching its minimum in the area with a precipitation of 400–600 mm, and a temperature of 15–20 °C. This trend might be attributed to a potential equilibrium between the photofacilitation and photo-inhibition effects of UV under this condition. This variation in UV effect on precipitation gradient was in agreement with the fact that UV photodegradation effect was weakest in grassland ecosystems compared to that in forest and desert ecosystems. In addition, initial litter quality significantly influenced the magnitude of UV effect, but had no influence on the correlation between UV effect and climate gradient. Litter with lower initial nitrogen and lignin content shown a greater photodegradation effect, whereas those with higher hemicellulose and cellulose content had a greater photodegradation effect. Our study provides a comprehensive understanding of photodegradation effect on plant litter decomposition, indicates potentially substantial impacts of global enhancements of litter decomposition by UV, and highlights the necessity to quantify the contribution of photochemical minerallization pathway and microbial degradation pathway in litter decomposition.

Bioreactor study of the metabolic repertoire and morphology of actinomycete Streptomyces rimosus ATCC 10970 under various initial concentrations of carbon and nitrogen sources

This work aims at investigating the influence of the initial concentrations of carbon (glucose) and organic nitrogen (yeast extract) sources on Streptomyces rimosus ATCC10970 secondary metabolism in the stirred tank bioreactors. Additionally, glucose utilisation, biomass formation, pH, redox potential and dissolved oxygen levels, and the morphological development of S. rimosus pseudomycelium were studied. Eighteen secondary metabolites were detected by mass spectrometry and identified with the use of the authentic standard, or putatively with the use of literature and database of secondary metabolites. Varied initial yeast extract concentration acted much stronger on the formation of secondary metabolites than glucose did. For example, oxytetracycline was not biosynthesised at high yeast extract concentration while the formation of three other metabolites was enhanced under these conditions. In the case of glucose its increasing initial concentration led to higher secondary metabolite levels with the exception of an unnamed angucycline. High initial yeast extract concentration also drastically changed S. rimosus pseudomycelial morphology from the pelleted to the dispersed one. Ultimately, the cultivation media with the varied initial levels of carbon and nitrogen sources were proved to have the marked effect on S. rimosus secondary metabolism and to be the simplest way to either induce or block the formation of the selected secondary metabolites.

Enhanced sporulation of B. licheniformis BF-002 through automatic co-feeding of carbon and nitrogen sources.

Bacillus licheniformis formulations are effective for environmental remediation, gut microbiota modulation, and soil improvement. An adequate spore quantity is crucial for the activity of B. licheniformis formulations. This study investigated the synergistic effects of carbon/nitrogen source consumption and concentration on B. licheniformis BF-002 cultivation, with the aim of developing an automatic co-feeding strategy to enhance spore production. Initial glucose (10 g/L) and amino nitrogen (1.5 g/L) concentrations promote cell growth, followed by reduced glucose (2.0 g/L) and amino nitrogen (0.5 g/L) concentrations for sustained spore generation. The spore quantity reached 2.59 × 1010 CFU/mL. An automatic co-feeding strategy was developed and implemented in 5 and 50 L cultivations, resulting in spore quantities of 2.35 × 1010 and 2.86 × 1010 CFU/mL, respectively, improving by 6.81% and 30.00% compared to that with a fixed glucose concentration (10.0 g/L). The culture broth obtained at both the 5 and 50 L scales was spray-dried, resulting in bacterial powder with cell viability rates of 85.94% and 82.68%, respectively. Even after exposure to harsh conditions involving high temperature and humidity, cell viability remained at 72.80% and 69.89%, respectively. Employing the automatic co-feeding strategy increased the transcription levels of the spore formation-related genes spo0A, spoIIGA, bofA, and spoIV by 7.42%, 8.46%, 8.87%, and 9.79%, respectively. The proposed strategy effectively promoted Bacillus growth and spore formation, thereby enhancing the quality of B. licheniformis formulations.

Understanding the Impact of Nitrogen Availability: A Limiting Factor for Enhancing Fucoxanthin Productivity in Microalgae Cultivation.

This study aimed to investigate the regulation of fucoxanthin (FX) biosynthesis under various nitrogen conditions to optimize FX productivity in Phaeodactylum tricornutum. Apart from light, nitrogen availability significantly affects the FX production of microalgae; however, the underlying mechanism remains unclear. In batch culture, P. tricornutum was cultivated with normal (NN, 0.882 mM sodium nitrate), limited (LN, 0.22 mM), and high (HN, 8.82 mM) initial nitrogen concentrations in f/2 medium. Microalgal growth and photosynthetic pigment production were examined, and day 5 samples were subjected to fucoxanthin-chlorophyll a/c-binding protein (FCP) proteomic and transcriptomic analyses. The result demonstrated that HN promoted FX productivity by extending the exponential growth phase for higher biomass and FX accumulation stage (P1), showing a continuous increase in FX accumulation on day 6. Augmented FX biosynthesis via the upregulation of carotenogenesis could be primarily attributed to enhanced FCP formation in the thylakoid membrane. Key proteins, such as LHC3/4, LHCF8, LHCF5, and LHCF10, and key genes, such as PtPSY, PtPDS, and PtVDE, were upregulated under nitrogen repletion. Finally, the combination of low light and HN prolonged the P1 stage to day 10, resulting in maximal FX productivity to 9.82 ± 0.56 mg/L/day, demonstrating an effective strategy for enhancing FX production in microalgae cultivation.

Study of Chlorella sorokiniana Cultivation in an Airlift Tubular Photobioreactor Using Anaerobic Digestate Substrate

Microalgae offer a promising solution for efficiently treating high-nitrogen wastewater and recovering valuable nutrients. To optimize microalgae growth and nutrient assimilation, case-dependent studies are essential to demonstrate the process’s potential. This study aimed to evaluate the treatment capacity of high-nitrogen anaerobic digestion effluent as a nutrient source for a C. sorokiniana microalgal culture in a tubular photobioreactor. The study had two primary objectives: to assess how the concentration and composition of the digestate influence microalgae growth, and to identify the preferred nitrogen forms assimilated by the microalgae during long-term, continuous operation. A 20 L tubular airlift bioreactor was constructed and used in batch mode; various digestate concentrations were examined with ammonia nitrogen levels reaching to 160 mg/L. These experiments revealed a biomass growth rate of up to 130 mg/L/d and an ammonia nitrogen assimilation rate ranging from 8.3 to 12.5 mg/L/d. The presence of phosphorous proved essential for microalgae growth, and the growth entered a stationary phase when the initial phosphorous was fully assimilated. A nitrogen-to-phosphorous (N/P) ratio of 10 supported efficient species growth. While ammonia was the preferred nitrogen form for microalgae, they could also utilize alternative forms such as organic and nitrate nitrogen, depending on the specific digestate properties. The results from the continuous photobioreactor operation confirmed the findings from the batch mode, especially regarding the initial nitrogen and phosphorous content. An important condition for nearly complete ammonia removal was the influent dilution rate, to balance the nitrogen assimilation rate. Moreover, treated effluent was employed as dilution medium, contributing to a more environmentally sustainable water management approach for the entire process, at no cost to the culture growth rate.

Preparation of NaA zeolite molecular sieve based on solid waste fly ash by high-speed dispersion homogenization-assisted alkali fusion-hydrothermal method and its performance of ammonia-nitrogen adsorption

A high-speed dispersion homogenization-assisted alkali fusion-hydrothermal method was successfully developed for the preparation of NaA zeolite molecular sieve with excellent adsorption performance for ammonia nitrogen using solid waste fly ash. The zeolite molecular sieve, prepared at a calcination temperature of 700 °C and a crystallization temperature of 80 °C, was identified as NaA zeolite molecular sieve through XRD and SEM tests, exhibiting a uniform and ordered cubic crystal structure. The result of BET analysis indicates that the NaA zeolite molecular sieve has a specific surface area of 288.219 m2/g and a plentiful pore structure. The effect of pH, adsorption time, and initial concentration of ammonia nitrogen on the adsorption capacity of NaA zeolite molecular sieve was also investigated. The fitting analysis of experimental adsorption data using adsorption kinetics and isotherm models indicates that the kinetic adsorption of ammonia nitrogen solution by zeolite molecular sieve follows the second-order kinetic model more closely. The Langmuir model shows a better correlation than the Freundlich model, suggesting that the adsorption of ammonia nitrogen solution by the zeolite molecular sieve is mainly based on the surface-uniform monolayer physical adsorption process. Under the conditions of pH = 7 and an initial ammonia nitrogen concentration of 100 mg/L, the adsorption capacity of the zeolite molecular sieve for ammonia nitrogen within 60 min can reach 27.5 mg/g, showing excellent adsorption performance. This study establishes a vital research foundation for the utilization of fly ash and the treatment of ammonia nitrogen wastewater, with great ecological and social benefits.

Physiological and Biochemical State of Green Microalgae (Chlorophyta) under Different Nutrients' Content in the Cultural Medium

The physiological and biochemical state of green microalgae &lt;i&gt;Tetradesmus dimorphus&lt;/i&gt; (Turpin) M.J. Wynne and &lt;i&gt;Desmodesmus brasiliensis&lt;/i&gt; (Bohlin) E. Hegew at different growth phases depending on the nutrients' content in the cultural medium was investigated. Maximal cell numbers, specific growth rate and biomass increment in &lt;i&gt;T. dimorphus&lt;/i&gt; were recorded at the exponential stage under high concentrations of nitrate nitrogen and phosphorus of phosphates, and in &lt;i&gt;D. brasiliensis&lt;/i&gt; - under low. The increase of the cells' division frequency resulted in their lesser size and increase of length/width ratio. Maximal content of lipids and carbohydrates in the cells of &lt;i&gt;T. dimorphus &lt;/i&gt;was recorded at the end of the exponential stage over cultivation in the medium with low initial concentrations of nitrate nitrogen and phosphorus of phosphates, and in &lt;i&gt;D. brasiliensis&lt;/i&gt; -with high content. At this is no difference in the proteins' content in their cells was revealed.

In situ forming of PEG-NH2/dialdehyde starch Schiff-base hydrogels and their application in slow-release urea

In this study, a biodegradable Schiff-base hydrogel urea, possessing substantial water retention and certain slow-release ability was designed and synthesized. Firstly, dialdehyde starch (DAS) and amine-terminated polyethylene glycol (PEG-(NH2)2) were synthesized using potato starch and polyethylene glycol. Then, a novel Schiff-base hydrogel (SH) was prepared through the in-situ reaction between the aldehyde group of DAS and the amino group of PEG-(NH2)2. Three SH based slow-release urea, designated as SHU1, SHU2, and SHU3 and distinguished by varying urea content, were obtained using SH as the substrate. Several characterizations and tests were conducted to determine the structure, thermal properties, morphology, swelling properties, sustainable use, water retention, and biodegradation properties of SH. Additionally, the slow-release behavior of SHU was studied. SEM results revealed that SH possessed a porous three-dimensional network structure, with a maximum water absorption capacity of 4440 % ± 6.23 %. Compared to pure urea, SHU exhibited better slow-release performance after 30 days of release in soil, with SHU1 having a residual nitrogen content of specifically 36.01 ± 0.57 % of the initial nitrogen content. A pot experiment with pakchoi substantiated the water retention and plant growth promotion properties of SHU. This study demonstrated a straightforward method for the preparation of starch-based Schiff-base hydrogels as fertilizer carriers.

Global sensitivity analysis of APSIM-wheat yield predictions to model parameters and inputs

The performance of cropping system models is often limited by uncertainties in model parameters and inputs. This study aims to explore how model yield prediction responds to these uncertainties under various environmental and management conditions. The Sobol’ method was used to investigate the sensitivity of the Agricultural Production Systems SIMulator (APSIM)-Wheat yield prediction to the following factors: air temperature (maximum and minimum), precipitation, initial soil nitrogen content, nitrogen fertilization amount, and soil hydraulic parameters. Eighteen scenarios were defined to consider a combination of three weather conditions (wet, normal, and dry growing season, based on the historical climatology of the Wimmera district of Victoria, Australia), three soil types (sandy, loamy, and clayey soils), and two nitrogen fertilization applications (50 and 100 kg N/ha). Eight thousand APSIM simulations were used to calculate the first order and total sensitivity indices for each scenario. The effects of weather, soil water characteristics and nitrogen availability were estimated by measuring their impacts on sensitivity indices. Our results show that yield was more sensitive either to variables that control water availability (precipitation and soil type) or variables that control nitrogen availability, depending on which was more limiting to wheat growth under the scenario. For example, in case of low nitrogen fertilization scenario, the initial nitrogen content sensitivity ranked first. Variation of this factor contributed 64% to 79% to the variance in simulated yield for clayey soils, nearly four times higher than the second-ranked factor (nitrogen fertilization amount). Soil hydraulic parameters and precipitation were most important when the crop growth was more constrained by water availability than by nitrogen availability. In the case of sandy soils in dry years with high nitrogen fertilization level, soil parameters and precipitation accounted for 83% of the yield variability. Minimum temperature consistently ranked as the least important factor under all scenarios. This work will help researchers better understand the model inputs’ impacts on the simulated yield variability under various soil, management, and weather conditions. The results also support agronomists and practitioners in the optimal use of the APSIM-Wheat model as a management tool.

Performance evaluation of hybrid constructed wetlands for nitrogen removal and statistical approaches.

Nitrogen pollution in water bodies has become a pressing environmental and public health issue worldwide, demanding the implementation of effective nitrogen removal strategies. This research paper delves into the performance evaluation of hybrid constructed wetlands (HCWs) as a sustainable and innovative approach for nitrogen removal, employing a comprehensive year-long dataset gathered from a practical setup. The study collected data under diverse operating conditions to investigate the effectiveness of HCWs in removing nitrogen. Results revealed that HCWs achieved nitrogen removal efficiencies ranging from 28% to 65%, influenced by temperature and hydraulic retention time. Optimal removal occurred at an average temperature of 28°C and a 4-day hydraulic retention time. Notably, performance declined during colder periods, with temperatures below 15°C. The study also aims to predict nitrogen removal by three modeling techniques, that is, artificial neural networks (ANNs), support vector machines Pearson VII kernel function (SVM PUK), and multiple linear regression (MLR). Prediction has been done considering temperature (TEMP), hydraulic loading rate (HLR), initial concentration of chemical oxygen demand (COD) (CODin), initial concentration of total nitrogen (TNin ), initial concentration of total phosphorous (TPin ), and initial concentration of turbidity (TBin ) as input parameters, whereas reduction of total nitrogen (RED TN) is regarded as output parameter. The performance of the soft computing techniques has been compared in terms of coefficient of determination (R2 ), root mean square error (RMSE), and mean absolute error (MAE). The analysis revealed that the performance of the SVM (PUK) model (R2 : 0.572, RMSE: 0.0359, MAE: 0.0294) for the prediction of TN reduction is superior followed by MLR (R2 : 0.562, RMSE: 0.0365, MAE: 0.0294) and ANN (R2 : 0.597, RMSE: 0.0377, MAE: 0.0301). The present study concludes that the treated effluent by the HCWs, using water hyacinth and water lettuce, is of fair quality, thus having potential application for the treatment of rice mill wastewater in warmer climates. Further, machine learning approaches employed in estimating the total nitrogen reduction by HCWs technology have shown promising applicability and utilization in such studies. PRACTITIONER POINTS: Hybrid constructed wetlands (HCWs) are effective in removing nitrogen from wastewater. The performance of HCWs in nitrogen removal can vary due to physical, chemical, and biological processes. The performance of the HCWs highly depends on temperature and hydraulic retention time. Artificial neural networks (ANNs) and support vector machines (SVMs) provided better predictions of nitrogen removal with high accuracy and low root mean square error.

Study on adsorption of ammonia nitrogen by sodium-modified kaolin at calcination temperature.

Natural kaolin (NK) is not used as a material for removal of ammonia nitrogen in wastewater because of its low ammonia adsorption capacity. In this study, sodium-modified kaolin adsorbent (NaCK) with high ammonia nitrogen adsorption capacity was prepared by NaOH modification of calcined NK, which was developed to address this problem. The adsorption properties were evaluated by batch static adsorption test. The results showed that when the initial concentration of ammonia nitrogen was 10 mg/L, pH = 8, and dosage of adsorbent was 1 g/L, the adsorption capacity of NaCK-600 for ammonia nitrogen was the best, reaching 6.23 mg/g, which was 34.6 times higher than that of NK (0.18 mg/g). Batch static adsorption test combined with adsorption kinetics, adsorption isothermal, and characteristic data showed that NaCK prepared at different temperatures had different adsorption mechanisms. Batch static adsorption test data of NaCK-600 was in good agreement with the pseudo-second-order model and Langmuir model, and the main mechanism of its adsorption of ammonia nitrogen was the ion exchange of NH4+ and Na+ in NaCK. After the third cycle, the removal rate of NaCK-600 was still up to 76.44%, which indicates that NaCK-600 has considerable potential for removal of ammonia nitrogen in wastewater and provides a new way for the application of kaolin in removal of ammonia nitrogen.