Initial Concentration Of Heavy Metal Ions Research Articles

Rapid and high capacity adsorption of heavy metals by Fe3O4/montmorillonite nanocomposite using response surface methodology: Preparation, characterization, optimization, equilibrium isotherms, and adsorption kinetics study

Fe3O4/montmorillonite nanocomposite (Fe3O4/MMT NC) was synthesized for removal of Pb2+, Cu2+ and Ni2+ ions from aqueous systems. The nanoadsorbent was characterized by X-ray diffraction and transmission electron microscopy and mean diameter of magnetic nanoparticles was about 8.24 nm. The experiments were designed by response surface methodology and quadratic model was used to prediction of the variables. The adsorption parameters of adsorbent dosage, removal time, and initial heavy metal ions concentration were used as the independent variables and their effects were investigated on the heavy metal ions removal. Variance analysis was utilized to judge the adequacy of the chosen models. Optimum conditions with initial heavy metal ions concentration of 510.16, 182.94, and 111.90 mg/L, 120 s of removal time and 0.06 g/0.025 L, 0.08 g/0.025 L, and 0.08 g/0.025 L of adsorbent amount were given 89.72%, 94.89%, and 76.15% of removal efficiency Pb2+, Cu2+ and Ni2+ ions, respectively. Prediction of models was in good agreement with experimental results and Fe3O4/MMT NC was found successful in removing heavy metals from their aqueous solutions.

Rapid adsorption of heavy metals by Fe3O4/talc nanocomposite and optimization study using response surface methodology.

Fe3O4/talc nanocomposite was used for removal of Cu(II), Ni(II), and Pb(II) ions from aqueous solutions. Experiments were designed by response surface methodology (RSM) and a quadratic model was used to predict the variables. The adsorption parameters such as adsorbent dosage, removal time, and initial ion concentration were used as the independent variables and their effects on heavy metal ion removal were investigated. Analysis of variance was incorporated to judge the adequacy of the models. Optimal conditions with initial heavy metal ion concentration of 100, 92 and 270 mg/L, 120 s of removal time and 0.12 g of adsorbent amount resulted in 72.15%, 50.23%, and 91.35% removal efficiency for Cu(II), Ni(II), and Pb(II), respectively. The predictions of the model were in good agreement with experimental results and the Fe3O4/talc nanocomposite was successfully used to remove heavy metals from aqueous solutions.

A promising absorbent of acrylic acid/poly(ethylene glycol) hydrogel prepared by glow-discharge electrolysis plasma

Abstract An acrylic acid/poly(ethylene glycol) (AAc/PEG) hydrogel was synthesized in aqueous solution by a simple one-step method using glow-discharge electrolysis plasma (GDEP) technique. The structure of AAc/PEG hydrogel was characterized by Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). Factors influencing the adsorption of heavy-metal ions such as solution pH, contact time, initial heavy-metal ion concentration were examined systematically by batch experiments. Results showed that both chemical complexation and ion exchange played an important role for heavy-metal ion adsorption onto AAc/PEG hydrogel. The adsorption isothermals followed the Langmuir isotherm and the adsorption kinetics fitted the pseudo-second-order model at 25°C with a pH 6. In addition, AAc/PEG hydrogel can be also regenerated and re-used.