Infrared Absorption Research Articles

Metal-Organic Framework Supported Low-Nuclearity Cluster Catalysts for Highly Selective Carbon Dioxide Electroreduction to Ethanol.

It is still a great challenge to achieve high selectivity of ethanol in CO2 electroreduction reactions (CO2RR) because of the similar reduction potentials and lower energy barrier of possible other C2+ products. Here, we report a MOF-based supported low-nuclearity cluster catalysts (LNCCs), synthesized by electrochemical reduction of three-dimensional (3D) microporous Cu-based MOF, that achieves a single-product Faradaic efficiency (FE) of 82.5 % at -1.0 V (versus the reversible hydrogen electrode) corresponding to the effective current density is 8.66 mA cm-2. By investigating the relationship between the species of reduction products and the types of catalytic sites, it is confirmed that the multi-site synergism of Cu LNCCs can increase the C-C coupling effect, and thus achieve high FE of CO2-to-ethanol. In addition, density functional theory (DFT) calculation and operando attenuated total reflectance surface-enhanced infrared absorption spectroscopy further confirmed the reaction path and mechanism of CO2-to-EtOH.

Quantum Cascade Laser Infrared Spectroscopy for Glycan Analysis of Glycoprotein Solutions.

Glycans are oligosaccharides attached to proteins or lipids and affect their functions, such as drug efficacy, structural contribution, metabolism, immunogenicity, and molecular recognition. Conventional glycosylation analysis has relied on destructive, slow, system-sensitive methods, including enzymatic reactions, chromatography, fluorescence labeling, and mass spectrometry. Herein, we propose quantum cascade laser (QCL) infrared (IR) spectroscopy as a rapid, nondestructive method to quantify glycans and their monosaccharide composition. Previously, we demonstrated high-sensitivity IR spectroscopy of protein solution using solvent absorption compensation (SAC) and double-beam modulation (DBM) techniques. However, the SAC-DBM approach suffered a limited frequency scanning range (<400 cm-1) due to the light dispersion by acousto-optic modulators (AOMs). Here, we implemented a mirror-based double-pass AOM in the SAC-DBM scheme and successfully extended the frequency range to (970 to 1840 cm-1), which encompasses the vibrational fingerprint of biomolecules. The extended frequency range allowed the simultaneous observation of monosaccharide ring bands (1000 to 1200 cm-1) and protein amide bands (1500 to 1700 cm-1). We compared the IR spectra of six glycoproteins and two nonglycosylated proteins with the results from intact mass spectrometry. The IR absorbance ratios of the ring band to the amide band of glycoproteins in solutions showed a linear correlation with the ratios of glycan to protein backbone masses. Furthermore, a multivariate analysis produced monosaccharide compositions consistent with the reported database for the glycoproteins, and the monosaccharide compositions were used to improve the predictability of the glycan-protein mass ratio from the IR-absorbance ratio. This nondestructive, high-sensitivity QCL-IR spectroscopy could be used as a standard method to monitor batch-to-batch comparability during drug manufacturing and quantify the glycosylation and monosaccharide composition of new glycoproteins and other glycosylated biosystems.

Temperature dependence of the near infrared absorption spectrum of single-wall carbon nanotubes dispersed by sodium dodecyl sulfate in aqueous solution: experiments and molecular dynamics study.

Single-wall carbon nanotubes (SWCNT) dispersed in water with the help of sodium dodecyl sulfate (SDS) surfactants exhibit a temperature dependent near infrared (NIR) exciton spectrum. Due to their biocompatibility and NIR spectrum falling within the transparent window for biological tissue, SWCNTs hold potential for sensing temperature inside cells. Here, we seek to elucidate the mechanism responsible for this temperature dependence, focusing on changes in the water coverage of the SWCNT as the surfactant structure changes with temperature. We compare optical absorption spectra in the UV-Vis-IR range and fully atomistic molecular dynamics (MD) simulations. The observed temperature dependence of the spectra for various SWCNTs may be attributed to changes in the dielectric environment and its impact on excitons. MD simulations reveal that the adsorbed SDS molecules effectively shield the SWCNT, with ~ 70% of water molecules removed from the first two adlayers; this coverage shows a modest temperature dependence. Although we are not able to directly demonstrate how this influences the NIR spectrum, this represents a potential pathway given the strong influence of the water environment on the excitons in SWCNTs. Optical absorption measurements were carried out in the UV-Vis-NIR range using a Varian Cary 5000 spectrophotometer in a temperature-controlled environment. PeakFit™ v. 4.06 was used as peak-fitting program in the spectral range 900-1400nm (890-1380meV) as a function of the temperature. Fully atomistic molecular dynamics simulations were conducted using the NAMD2 package. The CHARMM force field comprising two-body bond stretching, three-body angle deformation, four-body dihedral angle deformation, and nonbonded interactions (electrostatic and Lennard-Jones 6-16 potentials) was employed.

Metallic Degenerately Doped Free-Electron-Confined Plasmonic Nanocrystal and Infrared Extinction Response

In this paper, synthetically scaled-up degenerately n-type doped indium tin oxide (Sn:In2O3) nanocrystals are described as highly transparent conductive materials possessing both optoelectronic and crystalline properties. With tin dopants serving as n-type semiconductor materials, they can generate free-electron carriers. These free electrons, vibrating in resonance with infrared radiation, induce strong localized surface plasmon resonance (LSPR), resulting in efficient infrared absorption. To commercialize products featuring Sn:In2O3 with localized surface plasmon resonance, a scaled-up synthetic process is essential. To reduce the cost of raw materials during synthesis, we aim to proceed with synthesis in a large reactor using industrial raw materials. Sn:In2O3 can be formulated into ink dispersed in solvents. Infrared-absorbing ink formulations can capitalize on their infrared absorption properties to render opaque in the infrared spectrum while remaining transparent in the visible light spectrum. The ink can serve as a security ink material visible only through infrared cameras and as a paint absorbing infrared light. We verified the transparency and infrared absorption properties of the ink produced in this study, demonstrating consistent characteristics in scaled-up synthesis. Due to potential applications requiring infrared absorption properties, it holds significant promise as a robust platform material in various fields.

Infrared Lightwave Memory-Resident Manipulation and Absorption Based on Spatial Electromagnetic Wavefield Excitation and Resonant Accumulation by GdFe-Based Nanocavity-Shaped Metasurfaces.

An arrayed nanocavity-shaped architecture consisting of the key GdFe film and SiO2 dielectric layer is constructed, leading to an efficient infrared (IR) absorption metasurface. By carefully designing and optimizing the film system configuration and the surface layout with needed geometry, a desirable IR radiation absorption according to the spatial magnetic plasmon modes is realized experimentally. The simulations and measurements demonstrate that GdFe-based nanocavity-shaped metasurfaces can be used to achieve an average IR absorption of ~81% in a wide wavelength range of 3-14 μm. A type of the patterned GdFe-based nanocavity-shaped metasurface is further proposed for exciting relatively strong spatial electromagnetic wavefields confined by a patterned nanocavity array based on the joint action of the surface oscillated net charges over the charged metallic films and the surface conductive currents including equivalent eddy currents surrounding the layered GdFe and SiO2 materials. Intensive IR absorption can be attributed to a spatial electromagnetic wavefield excitation and resonant accumulation or memory residence according to the GdFe-based nanocavity-shaped array formed. Our research provides a potential clue for efficiently responding and manipulating and storing incident IR radiation mainly based on the excitation and resonant accumulation of spatial magnetic plasmons.

Applications of Metals and Metal Compounds in Improving the Sensitivity of Microfluidic Biosensors - A Review.

The enhancement of detection sensitivity in microfluidic sensors has been a continuously explored field. Initially, many strategies for sensitivity improvement involved introducing enzyme cascade reactions, but enzyme-based reactions posed challenges in terms of cost, stability, and storage. Therefore, there is an urgent need to explore enzyme-free cascade amplification methods, which are crucial for expanding the application range and improving detection stability. Metal or metal compound nanomaterials have gained great attention in the exploitation of microfluidic sensors due to their ease of preparation, storage, and lower cost. The unique physical properties of metallic nanomaterials, including surface plasmon resonance, surface-enhanced Raman scattering, metal-enhanced fluorescence, and surface-enhanced infrared absorption, contribute significantly to enhancing detection capabilities. The metal-based catalytic nanomaterials, exemplified by Fe3O4 nanoparticles and metal-organic frameworks, are considered viable alternatives to biological enzymes due to their excellent performance. Herein, we provide a detailed overview of the applications of metals and metal compounds in improving the sensitivity of microfluidic biosensors. This review not only highlights the current developments but also critically analyzes the challenges encountered in this field. Furthermore, it outlines potential directions for future research, contributing to the ongoing development of microfluidic biosensors with improved detection sensitivity.

Highly efficient uranium uptake by the eco-designed cocamidopropyl betaine-decorated Na-P1 coal fly-ash zeolite

In some locations around the globe, the U concentrations may exceed WHO standards by 2-folds therefore, effective yet environmentally wise solutions to purify radioactive waters are of significant importance. Here, the optimized and fully controlled coal-fly-ash based Na-P1 zeolite functionalization by employing novel, biodegradable biosurfactant molecule - cocamidopropyl betaine (CAPB) is showcased. The zeolite’s surface decoration renders three composites with varying amounts of introduced CAPB molecule (Na-P1 @ CAPB), with 0.44, 0.88, and 1.59-times External Cation Exchange Capacity (ECEC). Wet-chemistry experiments revealed extremely high U adsorption capacity (qmax = 137.1 mg U/g) unveiling preferential interactions of uranyl dimers with CAPB molecules coupled with ion-exchange between Na+ ions. Multimodal spectroscopic analyses, including Fourier-Transformed Infra-Red (FT-IR), X-ray Photoelectron (XPS), and X-ray Absorption Fine Structure (XAFS), showed the hexavalent oxidation state of U, and no secondary release of the CAPB molecule from the composite. The EXAFS signals fingerprint changes in the interatomic distances of adsorbed U, showing the impact of the O and N, heteroatoms present in the CAPB molecule on U binding mechanism. The presented research outcomes showcase the easy, scalable, optimized, and environmentally friendly synthesis of biofunctional zeolite effectively purifying the real-life U-bearing wastewaters from the vicinity of the Pribram deposit (Czech Republic).

An end-to-end approach for single-cell infrared absorption spectroscopy of bacterial inclusion bodies: from AFM-IR measurement to data interpretation of large sample sets

BackgroundInclusion bodies (IBs) are well-known subcellular structures in bacteria where protein aggregates are collected. Various methods have probed their structure, but single-cell spectroscopy remains challenging. Atomic Force Microscopy-based Infrared Spectroscopy (AFM-IR) is a novel technology with high potential for the characterisation of biomaterials such as IBs.ResultsWe present a detailed investigation using AFM-IR, revealing the substructure of IBs and their variation at the single-cell level, including a rigorous optimisation of data collection parameters and addressing issues such as laser power, pulse frequency, and sample drift. An analysis pipeline was developed tailored to AFM-IR image data, allowing high-throughput, label-free imaging of more than 3500 IBs in 12,000 bacterial cells. We examined IBs generated in Escherichia coli under different stress conditions. Dimensionality reduction analysis of the resulting spectra suggested distinct clustering of stress conditions, aligning with the nature and severity of the applied stresses. Correlation analyses revealed intricate relationships between the physical and morphological properties of IBs.ConclusionsOur study highlights the power and limitations of AFM-IR, revealing structural heterogeneity within and between IBs. We show that it is possible to perform quantitative analyses of AFM-IR maps over a large collection of different samples and determine how to control for various technical artefacts.

Dimeric and monomeric conformation of SARS-CoV-2 main protease: New technical approaches based on IR radiation

The main proteases Mpro are a group of highly conserved cysteine hydrolases in β-coronaviruses. They have been demonstrated to play an unavoidable role in viral replication, and consequently they have been suggested as key targets for treating coronavirus-caused infectious diseases, mainly from the COVID-19 epidemic. Since the most functional form for Mpro enzymatic activity is associated to its homodimer, compounds inhibiting dimerization should also inhibit catalytic activity. We show how PIR-SEIRA (Plasmonic Internal Reflection-Surface Enhanced InfraRed Absorption) spectroscopy can be a noteworthy technique to study proteins subtle structural variations associated to inhibitor binding. Nanoantennas arrays can selectively confine and enhance electromagnetic field via localized plasmonic resonances, thus promoting ultrasensitive detection of biomolecules in close proximity of nanoantenna arrays and enabling the effective investigation of protein monolayers. By adopting this approach, reflection measurements conducted under back illumination of nanoantennas allow to probe anchored protein monolayers, with minimum contribution of environmental buffer molecules. PIR-SEIRA spectroscopy on Mpro was carried out by ad hoc designed devices, resonating in the spectral region of Amide I and Amide II bands. We evaluated here the structure of anchored monomers and dimers in different buffered environment and in presence of a newly designed Mpro inhibitor. Experimental results show that dimerization is not associated to relevant backbone rearrangements of the protein at secondary structure level, and even if the compound inhibits the dimerization, it is not effective at breaking preformed dimers.

Sulfur-Bridged Asymmetric CuNi Bimetallic Atom Sites for CO2 Reduction with High Efficiency.

Double-atom catalysts (DACs) with asymmetric coordination are crucial for enhancing the benefits of electrochemical carbon dioxide reduction and advancing sustainable development, however, the rational design of DACs is still challenging. Herein, this work synthesizes atomically dispersed catalysts with novel sulfur-bridged Cu-S-Ni sites (named Cu-S-Ni/SNC), utilizing biomass wool keratin as precursor. The plentiful disulfide bonds in wool keratin overcome the limitations of traditional gas-phase S ligand etching process and enable the one-step formation of S-bridged sites. X-ray absorption spectroscopy (XAS) confirms the existence of bimetallic sites with N2Cu-S-NiN2 moiety. In H-cell, Cu-S-Ni/SNC shows high CO Faraday efficiency of 98.1% at -0.65V versus RHE. Benefiting from the charge tuning effect between the metal site and bridged sulfur atoms, a large current density of 550mAcm-2 can be achieved at -1.00V in flow cell. Additionally, in situ XAS, attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS), and density functional theory (DFT) calculations show Cu as the main adsorption site is dual-regulated by Ni and S atoms, which enhances CO2 activation and accelerates the formation of *COOH intermediates. This kind of asymmetric bimetallic atom catalysts may open new pathways for precision preparation and performance regulation of atomic materials toward energy applications.

Tri-signal CdS@SiO2 nanoprobes for accurate and sensitive detection of human immunoglobulin G with enhanced flexibility and internal validation

Accurate and sensitive determination of human immunoglobulin G (HIgG) level is critical for diagnosis and treatment of various diseases, including rheumatoid arthritis, humoral immunodeficiencies, and infectious disease. In this study, versatile tri-signal probes were developed by preparing CdS@SiO2 nanorods that integrate photoluminescence (PL), multi-phonon resonant Raman scattering (MRRS) and infrared absorption (IRA) properties. Through the coating of multiple CdS nanoparticles as cores within SiO2 shells, the PL and MRRS properties of CdS were improved, resulting in a significantly lowered limit of detection (LOD), with the lowest LOD of 12.37 ag mL−1. Integration with the distinctive IRA property of SiO2 shells widened the detection range towards higher concentrations, establishing a final linear range of 50 ag mL−1 to 10 μg mL−1. The remarkable consistency among the three signals highlighted the robust internal verification capability for accurate detection. This approach enhances flexibility in selecting detection methodologies to suit diverse scenarios, facilitating HIgG detection. The tri-signal nanoprobes also exhibited excellent detection selectivity, specificity and repeatability. This study presents a fresh idea for developing high-performance detection strategies.

Uncovering the Dissociative Adsorption of the Leveler Janus Green B on Cu Electrodes at the Molecular Level.

The interfacial adsorption structure of an organic leveler decides its functionality in Cu interconnect electroplating and is yet far from clear. In this work, in situ attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) and electrochemical quartz crystal microbalance (EQCM) in conjunction with density functional theory (DFT) calculations are applied to unravel the interfacial adsorption of the classic dye leveler Janus Green B (JGB) at a Cu electrode and understand its polarization property against Cu electrodeposition from an adsorption structure perspective. ATR-SEIRAS measurements and DFT calculations reveal that the N=N bond of the JGB molecule splits via reductive hydrogenation, forming two fragments of contrasting adsorption configurations. JGB exhibits the strongest inhibition effect on Cu deposition among all the tested additives including individual and mixed fragments, due to the highest coverage of organic adsorbates from JGB dissociation, as measured by EQCM. This work highlights the advantage of surface sensitive analytical tools in understanding the structure-performance of levelers.

Phonon–Polaritonic Resonances on Nanopillars of Hexagonal Boron Nitride for Surface‐Enhanced Infrared Absorption

Phonon polaritons (PhPs) in hexagonal boron nitride enable sharp midinfrared optical resonance with strong spatial confinement, making them promising for surface‐enhanced infrared absorption (SEIRA) spectroscopy. Here, using colloidal nanosphere lithography, hBN nanopillar antennas are fabricated and their PhP resonances in a cost‐effective way are demonstrated. By varying the diameters of the hBN nanopillars, the PhP resonance can be readily tuned to match the molecular vibrations of CBP (4,4′‐bis(N‐carbazolyl)‐1,1′‐biphenyl) molecules. Upon frequency matching, the coupling between the PhP resonance and the molecular vibration shows pronounced mode splitting, illustrating the SEIRA behavior with a coupling strength approaching the strong coupling regime. However, with slight frequency mismatching around 10 cm−1, the coupling strength decreases significantly, indicating a high sensitivity of the SEIRA activities to the resonance frequency of hBN nanopillar antennas. The findings provide a new method for the fabrication of PhP nanoantennas and may promote the development of PhPs in SEIRA‐based midinfrared sensing applications.

Phospha-RosIndolizine Dye with Shortwave Infrared (SWIR) Absorption and Emission.

Shortwave infrared (SWIR, 1000-1700 nm) absorbing and emitting dyes are needed for infrared diodes and sensors used in a wide variety of industrial and medical applications. Herein, an electron-withdrawing phosphine oxide (P═O) substituted xanthene is coupled with strong indolizine donors to produce a SWIR absorbing (λabs = 1294 nm in DCM) and emitting (λemis = 1450 nm in DCM) dye called PRos1450. The unique properties of this dye are characterized via photophysical, electrochemical, and computational analyses.

Electrochemical Synthesis of Urea: Co-Reduction of Nitrite and Carbon Dioxide on Binuclear Cobalt Phthalocyanine.

Exploration of molecular catalysts with the atomic-level tunability of molecular structures offers promising avenues for developing high-performance catalysts for the electrochemical co-reduction reaction of carbon dioxide (CO2) and nitrite (NO2 -) into value-added urea. In this work, a binuclear cobalt phthalocyanine (biCoPc) catalyst is prepared through chemical synthesis and applied as a C─N coupling catalyst toward urea. Achieving a remarkable Faradaic efficiency of 47.4% for urea production at -0.5V versus reversible hydrogen electrode (RHE), this biCoPc outperforms many known molecular catalysts in this specific application. Its unique planar macromolecular structure and the increased valence state of cobalt promote the adsorption of nitrogenous and carbonaceous species, a critical factor in facilitating the multi-electron C─N coupling. Combining highly sensitive in situ attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) with density functional theory (DFT) calculations, the linear adsorbed CO (COL) and bridge adsorbed CO (COB) is captured on biCoPc catalyst during the co-reduction reaction. COB, a pivotal intermediate in the co-reduction from CO2 and nitrite to urea, is evidenced to be labile and may be attacked by nitrite, promoting urea production. This work demonstrates the importance of designing molecular catalysts for efficient co-reduction of CO2 and nitrite to urea.

Photothermal Utility Heating with Diffused Indoor Light via Multiple Transparent Fe3O4@Cu2−xS Thin Films

By introducing a novel photothermal radiator that effectively harnesses diffused light through plasmonic Fe3O4@Cu2−xS nanoparticles, it is sought to offer a sustainable solution for maintaining comfortable indoor temperatures without heavy reliance on traditional solar sources. The approach involves the use of ultraviolet (UV) and infrared (IR) lights to photothermally activate transparent Fe3O4@Cu2−xS thin films, showcasing a proactive strategy to optimize energy capture even in low‐light scenarios such as cloudy days or nighttime hours. This innovative technology carries immense potential for energy‐neutral buildings, paving the way to reduce dependence on external energy grids and promoting a more sustainable future for indoor heating and comfort control. The developed photothermal radiator incorporates multiple transparent thin films infused with plasmonic Fe3O4@Cu2−xS nanoparticles, known for their robust UV and IR absorptions driven by localized surface plasmon resonance. Through the application of UV and IR lights, these thin films efficiently convert incident photons into thermal energy. The experiments within a specially constructed diffused light photothermal box, designed to simulate indoor environments, demonstrate the system's capability to raise temperatures above 50 °C effectively. This pioneering photothermal radiator offers a promising pathway for sustainable heat generation in indoor spaces, harnessing ubiquitous diffused light sources to enhance energy efficiency.

Artificial electron snorkels reduce CH4 emissions in paddy soil: Regulation of the electron transfer pathway and microbial community ecology

Climate science has focused on reducing emissions of atmospheric CH4 from paddy soils, as CH4 has stronger infrared absorption characteristics than CO2. Like cable bacteria, artificial electron snorkels (made of solid graphite rods) have been proposed in this study to provide potential remote electron acceptors for soil anaerobic metabolism to compete with methanogenic processes. A systematic investigation was conducted on the modulation of the CH4 emission dynamics by electron snorkels at different densities, as well as the associated metabolism of C/N/Fe in paddy soil. During 124 days of operation, the electron snorkels suppressed CH4 emissions by 7–31% over ten sampling periods, and the high-density setting exhibited stronger performance. The electron snorkels accelerated the early mineralization of soil organic matter, increasing the content of dissolved organic matter by 20–236%. These organics were utilized by microorganisms, where O2, NO3−, and Fe3+ acted as electron acceptors, enhancing soil alternative respiration and producing CO2. Metagenomic and 16S rRNA gene sequencing revealed that microbial abundance and diversity were increased by 4–71% in the soil bottom layer (7 cm–8 cm depth) driven by electron snorkels. Moreover, electron snorkels potentially prevented CH4 escape by either improving soil permeability or electrically stimulating the abundance of methanotrophs (e.g., Methylocystis). The ratio of methanogenic to methane-oxidizing gene abundances was reduced by 22–66% under the electron snorkels. Our results indicate that the applied electron snorkels have significant potential in enriching the soil microbial community involved in methane cycling to mitigate CH4 emissions from paddy fields.

Universal Formation of Single Atoms from Molten Salt for Facilitating Selective CO2 Reduction.

Clarifying the formation mechanism of single-atom sites guides the design of emerging single-atom catalysts (SACs) and facilitates the identification of the active sites at atomic scale. Herein, a molten-salt atomization strategy is developed for synthesizing zinc (Zn) SACs with temperature universality from 400 to 1000/1100°C and an evolved coordination from Zn-N2Cl2 to Zn-N4. The electrochemical tests and in situ attenuated total reflectance-surface-enhanced infrared absorption spectroscopy confirm that the Zn-N4 atomic sites are active for electrochemical carbon dioxide (CO2) conversion to carbon monoxide (CO). In a strongly acidic medium (0.2m K2SO4, pH = 1), the Zn SAC formed at 1000°C (Zn1NC) containing Zn-N4 sites enables highly selective CO2 electroreduction to CO, with nearly 100% selectivity toward CO product in a wide current density range of 100-600mAcm-2. During a 50 h continuous electrolysis at the industrial current density of 200mAcm-2, Zn1NC achieves Faradaic efficiencies greater than 95% for CO product. The work presents a temperature-universal formation of single-atom sites, which provides a novel platform for unraveling the active sites in Zn SACs for CO2 electroreduction and extends the synthesis of SACs with controllable coordination sites.

A supported Ni2 dual-atoms site hollow urchin-like carbon catalyst for synergistic CO2 electroreduction

Dual-atoms catalysts (DACs), while inheriting the advantages of maximum atom utilization ratio and excellent selectivity of single-atom catalysts (SACs), can better enhance the catalytic activity through the synergy of adjacent atoms. Therefore, DACs are considered to be very potential catalysts for CO2 to CO conversion. Its catalytic activity is greatly influenced by the coordination environment and morphology. Here, hollow urchin-like NiNC catalysts (Ni-NC(HU)-x, x = 100, 50, 25, 0) were synthesized using urchin-like nickel particles as template. By adjusting the amount of additional nitrogen source, the percentage content of pyridinic-N was adjusted as well as further affecting the coordination environment. Among them, Ni-NC(HU)-50, which had the highest content of pyridinic-N, formed a dual-atoms coordination structure and had the best catalytic performance that the CO Faradaic efficiency (FECO) reached 97.2 % at −0.9 V vs. reversible hydrogen electrode (RHE) and sustained above 95 % within 50 h. In-situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) and density functional theory (DFT) calculations showed that Ni-NC(HU)-50 exhibited the best performance of CO2 reduction reaction (CO2RR) by lowering the *COOH formation free energy barrier and its favorable dual desorption mechanism of *COL and *COB.

Catalytic Peculiarity of Alkali Metal Cation-Free Electrode/Polyelectrolyte Interfaces Toward CO2 Reduction.

A prominent feature of modern electrochemical technologies, such as fuel cells and electrolysis, is the employing of polyelectrolytes instead of liquid electrolytes. Unlike the well-studied electrode/liquid electrolyte interfaces, however, the catalytic characteristics of electrode/polyelectrolyte interfaces remain largely unexplored, mostly due to the lack of reliable probing methods. Herein, we report a universally applicable approach to investigating electrocatalytic reactions at electrode/polyelectrolyte interfaces under normal electrochemical conditions. By coating a thin layer of anion-exchange membrane (AEM) onto the electrode surface, solutions with bulky organic cations were well separated, thus a pure electrode/polyelectrolyte interface can be established in a regular electrochemical setup and studied using in situ spectroscopies, e.g., attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS). We found that the blank Au surface was inert toward the CO2 reduction reaction (CO2RR) in the absence of alkali metal cations, whereas coating with an AEM can dramatically turn on the catalytic activity. ATR-SEIRAS revealed that the hydrogen bond network of water at the Au/AEM interface was enhanced in comparison to that on the blank Au surface, which facilitated the hydrogenation process of the CO2RR. These findings further our fundamental understanding of the catalytic behavior of electrode/polyelectrolyte interfaces and benefit the development of relevant electrochemical technologies.