Influence Of Temperature Research Articles

A Low-Temperature Na-MoS2 Rechargeable Battery.

It is generally accepted that the low-temperature environment typically augments electrolyte viscosity and impedes electrochemical kinetics, thereby diminishing battery performance. However, this prevailing notion, while valid in certain contexts, lacks universality, particularly regarding cycling stability. In this context, the Na-MoS2 batteries serve as a model to elucidate the impacts of low temperatures. By significantly suppressing the pulverization and amorphization of MoS2, the low-temperature milieu effectively mitigates the risk of micro-short circuits induced by the mass shuttling to the Na metal anode, thereby averting performance degradation by self-discharge. Upon cycling, the generated NaxMo3S4 intermediates only at low temperatures benefit the structural and electrochemical stabilizations to counteract the intrinsic performance degradation. The attenuation of kinetics at low temperatures facilitates the accumulation of Na2S, akin to a sustained-release agent within the electrode, steadily furnishing the capacity in long cycling. Moreover, the suppression of polysulfide dissolution and shuttling emerges as a pivotal factor contributing to the cycling stability at low-temperature. These findings provide a rewarding avenue toward understanding of the influence of low temperature on battery performance, as well as the design of practical electrodes and batteries for low-temperature applications.

Optimization and Stability Assessment of Monochamus alternatus Antimicrobial Peptide MaltAtt-1 in Komagataella phaffii GS115 for the Control of Pine Wood Nematode

MaltAtt-1 is an antimicrobial peptide isolated from Monochamus alternatus with nematocidal activity against pine wood nematode. In this study, a eukaryotic expression system based on Komagataella phaffii GS115 was established, and its secretory expression of MaltAtt-1 was realized. The basic properties and secondary and tertiary structures of the antimicrobial peptide MaltAtt-1 were identified by bioinformatics analysis. MaltAtt-1 is a hydrophilic stable protein, mainly composed of an α-helix (Hh), β-folds (Ee), and irregular curls (Cc). The optimal fermentation conditions for MaltAtt-1 were determined by a single-factor test and the Box–Behnken response surface method, including an induction time of 72 h, induction temperature of 30 °C, culture medium of pH 7.6, methanol volume fraction of 2.0%, and an initial glycerol concentration of 1%. The stability of MaltAtt-1 indicated its resistant to UV irradiation and repeated freezing and thawing, but the antibacterial activity decreased significantly under the influence of high temperature and a strong acid and base, and it decreased significantly to 1.1 cm and 0.83 cm at pH 2.0 and pH 10.0, respectively. The corrected mortality of B. xylophilus achieved 71.94% in 3 h at a concentration of 300 mg·L−1 MaltAtt-1 exposure. The results provide a theoretical basis for the antimicrobial peptide MaltAtt-1 to become a new green and efficient nematicide.

The Effect of Artificial Ageing on the Changes in Selected Properties of Organic Coated Sheets

This contribution presents the results of research focused on changes in selected properties of organic-coated steel sheets in a corrosive environment of salt mist. The aim of this study was to characterise coated sheets and to analyse the influence of elevated temperature on changes in their selected properties. The methodology and experiments were chosen to simulate the accelerated ageing and to evaluate the surface of organic-coated steel sheets. During the research, the effect of artificial ageing due to increased temperature on changes in mechanical properties of coated sheets was monitored, which were determined by tensile testing according to STN EN 10002-1. The fracture surface of the test samples was analysed using a SEM. The following observations were made for the evaluation of coating by cross-cut tests according to EN ISO 2409. Corrosion tests were carried out by conducting salt spray corrosion tests according to EN ISO 9227. The test specimens were artificially sectioned using a laser beam. The results of the research experiments confirmed the assumption that the utilisation of the laser beam was convenient for the creation cross–cut test of the material. After the ageing test, only small significant changes in the basic mechanical properties of the tested materials were observed. It is necessary to take into account that there were changes in the appearance of the coating. The cross-cut test confirmed the results that the plastic-coated sheets could be utilised in salt corrosion environments.

Current understanding and future prospects for ash dieback disease with a focus on Britain

Abstract Hymenoscyphus fraxineus is an introduced ascomycete fungus which causes ash dieback and has resulted in widespread mortality of ash throughout Europe. Although H. fraxineus has been present on the continent for at least four decades, it was not identified until 2006. The first record of the pathogen in Britain came in 2012 although it was probably present a decade earlier. The most common host European ash (Fraxinus excelsior L.) is economically and ecologically important to Britain where the cost of ash dieback is estimated at billions of pounds. The impact of ash dieback has stimulated a major research response which we review with the aim of providing up-to-date information relevant to Britain and identifying knowledge gaps where research would contribute to improved disease mitigation. Hymenoscyphus fraxineus is an outcrossing fungus with high genotypic diversity; ascospores produced via sexual reproduction are critical to aerial dispersal and infection. Temperature, moisture, and ground cover influence pathogen fruit body development, the timing of ascospore release, and extent of ascospore germination; they also interact together to affect the likelihood of infection. In addition, stand characteristics, including tree density, tree height, and landscape fragmentation, affect disease dynamics with increased disease severity on moist sites with high ash density. Efforts at finding natural resistance in ash have identified genetic markers associated with disease tolerance, and gene expression analysis is providing insights into the basis of that resistance. Mainland European findings indicate that ash dieback makes trees more vulnerable to other pathogens, whilst endophytes in the ash phyllosphere can suppress infection by H. fraxineus. Possible tools for long-term control of ash dieback include (1) deployment of resistant ash, (2) quantitatively informed management practices based on microclimate models and better understanding of the pathogen life cycle, and (3) manipulation of biocontrol agents from the ash microbiome or pathogen mycoviruses.

Enhanced sensitivity of magnetic field sensing using L-shaped dual Terfenol-D-FBGs based on the Vernier effect and a dual-loop optoelectronic oscillator

We proposed and successfully validated improved the sensitivity of magnetic field sensing using the Vernier effect in a dual-loop optoelectronic oscillator (OEO) incorporating cascaded L-shaped Terfenol-D-FBGs. Thanks to the time delay introduced by the dispersion compensating fiber (DCF) in the OEO cavity, precise conversion between the sensing FBG wavelength changes and the OEO oscillation frequency can be achieved. The central wavelengths of the sensing Terfenol-D-FBG change along with the magnetic field. Therefore, the magnetic field can be monitored by measuring the oscillating frequency of the OEO. In the proposed scheme, two reflection signals from the cascaded FBGs pass through two fiber paths with slightly different lengths, inducing the Vernier effect in the OEO, which significantly enhances the sensitivity of the sensor. Additionally, a bias magnetic field is applied to the sensing Terfenol-D alloy to further improve the sensitivity. Experimental results demonstrate that by applying a bias magnetic field on both sides of the sensing Terfenol-D, the sensitivity of the single-loop OEO is increased from 421 Hz/mT to 560 Hz/mT. Utilizing the Vernier effect, the magnetic field sensitivity of the dual-loop OEO reaches up to −16.54 kHz/mT, with a 29-times improvement over the single-loop OEO's 560 Hz/mT. By finely adjusting the path length difference, we further enhance the performance of the sensor, achieving sensitivities of −24.58 kHz/mT, −28.49 kHz/mT and −35.94 kHz/mT, respectively, which are 44 times, 51 times and 64 times higher than the single-loop OEO structure. Besides, to overcome the influence of temperature, a temperature compensation sensor is designed using a pair of L-shaped Terfenol-D alloys to host the cascaded sensing FBG and reference FBG. The experimental results show that the proposed L-shaped Terfenol-D with cascaded FBG can reduce the magnetic field error caused by temperature crosstalk to 0.03 mT.

Laser-Tracing Multi-Station Measurements in a Non-Uniform-Temperature Field

Due to the increasing requirements for the improvement of the accuracy of large coordinate-measuring machines (CMMs), the laser-tracing multi-station measurement technology, as one of the advanced precision measurement technologies, is worth studying in depth in terms of its practical application for the compensation of errors in large CMMs. Since it is difficult to maintain a constant temperature of about 20 °C in the actual workshop under the influence of solar radiation and convective heat transfer, there is a gradient in the spatial temperature distribution, and the overall temperature changes with the influence of external factors with synchronous hysteresis, it is difficult for the actual calibration environment to meet the standard environmental requirements. Therefore, the influence of temperature and other environmental factors on the accuracy of laser ranging and large-scale CMM calibration should not be ignored. In this paper, on the basis of analyzing the temperature distribution and change rule of large CMM measurement space under different working conditions, the radial basis function (RBF) neural network algorithm was used to build a non-uniform-temperature field model, and based on this model and the measurement principle of the laser-tracking instrument, the method of laser tracking and interferometric ranging accuracy enhancement was put forward under a non-uniform-temperature field. Finally, based on the multi-station technique of laser tracing, an accurate solution for the volumetric error of large CMMs under the condition of non −20 °C ambient temperature was realized. Simulation results proved that compared with the traditional temperature-compensation method, the proposed method improved the measurement accuracy of the volumetric error of a large-scale CMM using laser-tracing multi-station technology in a non-uniform-temperature field by 33.5%. This study provides a new approach for improving the accuracy of laser-tracer multi-station measurement systems.

Coupled axial-torsional free vibration analysis of a rotating thin-walled composite beam in hygrothermal environments

ABSTRACT The coupled axial-torsional vibrations of a composite beam in hygrothermal environments are studied. In the existing literature, most studies investigated the torsional/axial-bending vibrations of rotating composite beams. Few works considered the axial-torsional vibrations in hygrothermal environments. By considering this, the coupled axial-torsional vibration characteristics of composite thin-walled beams in hygrothermal environments are studied. Vibration characteristics are solved using the Rayleigh-Ritz method. The accuracy of the calculation results is verified using the finite element method. The following conclusions are obtained: (1) The frequencies decrease with the hygrothermal factors and mounting angle. (2) Compared to temperature, moisture has a smaller impact on frequencies. (3) The influence of rotating speed and mounting angle is minimal and can be ignored. (4) The influences of ply angle on frequencies are more significant than other parameters. (5) The axial inertia force decreases torsional frequencies when the ply angle is 15°~75°. (6) The influences of temperature, moisture, rotating speed, and mounting angle on the first two modes are very small and can be ignored.

Surface morphology of 3C–SiC layers grown on 4H–SiC substrates using TCS as silicon precursor

The hetero-epitaxial growth of 3C–SiC layers on on-axis 4H–SiC substrates has been demonstrated in a hot-wall CVD reactor using trichlorosilane and ethylene as precursors. The additional chlorine is supplied by hydrogen chloride for variation of Cl/Si ratio. The influence of temperature, C/Si ratio and Cl/Si ratio process parameters on the morphology is studied. Double-position-boundaries free 3C–SiC epitaxial layers have been successfully grown at the optimized condition, which is at a temperature of 1340 °C, with C/Si = 0.6 and Cl/Si = 6 using a carbon-rich pretreatment. Low temperature near bandgap photoluminescence shows a good optical property of the obtained 3C–SiC epitaxial layers. Compared to the standard chemistry, a higher growth rate of 12 μm/h could be achieved by utilizing the chlorinated precursors. This study provides a feasible way to grow double-position-boundaries free 3C–SiC epitaxial layers using TCS as silicon precursor.

Artificial humic acid produced from wet distillers grains in a microwave-assisted hydrothermal process: Physicochemical characteristics and stimulation to plant growth

Wet distillers grains, as a waste biomass with a large annual output, pose a threat to the environment and food industry. Herein, artificial humic acid (AHA) was first produced from wet distillers grains in a dual-stage microwave-assisted hydrothermal process. The influence of temperature on AHA's characteristics was investigated and compared with natural humic acid (NHA) and standard humic acid (SHA). A high yield of AHA at 20.6% was obtained at 200 °C with a total reaction time of 1 h, which is 1.8–3.1 times that obtained in traditional single-stage hydrothermal process. Increasing the reaction temperature induced the formation of phenolic hydroxyl in AHA. AHA was rich in aromaticity and carboxylic acid structure, showing similar spectral characteristics to NHA. The distribution of molecular weight of AHA was mostly 5797 Da, which decreased by 15% compared to SHA. The optimal concentration of AHA to promote seedling growth was 0.2 g/L, and the root length was 2.0 times that of the control. The microwave hydrothermal process is a facile and efficient approach to preparing AHA from waste biomass with high moisture content.

On the microstructural evolution and mechanical property development of additively manufactured AlCoCrFeNi2.1 eutectic high-entropy alloy with aging temperature

In this study, the microstructure and mechanical properties of a laser powder bed fusion processed eutectic high-entropy alloy, AlCoCrFeNi2.1, and the influence of aging temperature have been investigated. The as-printed material consists of a hierarchical cellular eutectic microstructure with γ cells and a B2 network along the cell boundaries. The γ matrix contains homogeneously distributed Al2O3 nanoparticles and sporadically distributed L12 long-range ordered (LRO) domains. Some B2 grains contain ultrafine body-centred cubic Cr-rich precipitates. Aging at 500–700 °C leads to disruption of the B2 network and coarsening of the B2 grains at the intersections of several cells and thinning of the rest of the regions. At 800 °C, the B2 cellular network completely disappears and turns into large isolated spherical or near-spherical B2 particles with the original γ cells being fully integrated. At 600 °C, numerous ultrafine γ′ nanoparticles form from the γ matrix and turn into elongated γ′ at 700 °C but completely disappear at 800 °C due to the formation of thermally more stable B2 precipitates. The as-printed samples show a high yield strength (YS∼ 1050 MPa) and good ductility (elongation ∼ 20 %) due to the strengthening effects from the LRO domains and the less deformable B2 and Al2O3 particles. Aging at 600–700 °C leads to significant strength improvement mainly owing to the γ′ particles. Aging at 800 °C results in a considerable decrease in YS but improves the ductility due to the disappearance of γ′ precipitates and the B2 cellular network.

A Study on the Thermal Physical Property Changes in Formation Rocks during Rapid Preheating of SAGD

The incorporation and application of SAGD rapid preheating technology effectively solve the problem of the long preheating cycle in the SAGD steam cycle. The thermal properties of reservoir rocks are an important factor affecting the heat transfer law governing their formation during the rapid preheating process of SAGD. During the rapid preheating process of SAGD, the expansion of the reservoir and the steam cycle process will cause changes in the pore permeability, oil-water saturation, and temperature of the reservoir rocks, which will inevitably lead to differences in the changes that occur in the thermal properties of the reservoir rocks, compared to those under the influence of a single factor. In this study, experiments were conducted to determine the thermal properties of reservoir rocks under the combined influence of pore permeability, oil-water saturation, and temperature, quantitatively characterizing the changes in the thermal properties of reservoir rocks. Using the orthogonal method to design and carry out experiments for determining the thermal properties of reservoir rocks, the main factors affecting the thermal properties of reservoir rocks and the significance of each factor’s impact on the thermal properties of reservoir rocks were determined through intuitive analysis and variance analysis of the experimental results. Finally, a regression equation that can characterize changes in the thermal properties of reservoir rocks under the influence of multiple factors was obtained through multiple nonlinear regressions of the experimental results.

Temperature-dependent microbial mechanism and accumulation of volatile fatty acids in primary sludge pretreated with peroxymonosulfate

For revealing the influence of temperature on volatile fatty acids (VFAs) generation from primary sludge (PS) during the anaerobic fermentation process facilitated by peroxymonosulfate (PMS), five fermentation groups (15, 25, 35, 45, and 55 °C) were designed. The results indicated that the production of VFAs (5148 mg COD/L) and acetic acid (2019 mg COD/L) reached their peaks at 45 °C. High-throughput sequencing technology disclosed that Firmicutes, Proteobacteria, and Actinobacteria was the dominant phyla, carbohydrate metabolism and membrane transport were the most vigorous at 45 °C. Additionally, higher temperature and PMS exhibit synergistic effects in promoting VFAs accumulation. This study unveiled the mechanism of the effect of the pretreatment of PS with PMS on the VFAs production, which established a theoretical foundation for the production of VFAs.

Exploration of the mechanism of temperature influence on bitter taste of theacrine by activating human bitter taste receptor hTAS2R14

Theacrine, a purine alkaloid derived from Camellia assamica var. kucha, has a distinct bitter taste. Our previous study found the lower recognition threshold of theacrine at 25 °C than 45 °C. This study aims to investigate the bitterness characterizations of theacrine at aforementioned temperatures and its taste perception mechanism. Sensory analysis exhibited higher bitterness intensity for theacrine at 25 °C than 45 °C. Subsequently, flow cytometry was performed to verify the above characterization at the cellular level. It revealed that theacrine could activated the bitter receptor hTAS2R14 and the calcium signal at 25 °C was higher than 45 °C. Ultimately, the interaction mechanism was studied by molecular dynamics simulations, indicating that the conformation of theacrine-hTAS2R14 had a higher binding capacity and better stability at 25 °C. Overall, temperature affected the binding of theacrine to the bitter receptor hTAS2R14, resulting in the stronger bitterness intensity of theacrine at 25 °C than 45 °C.

Influence of calcination temperature on the 3D nanoscale topography of LaMnO3 thin films: A comprehensive surface analysis

In this paper, we present a comprehensive study on the 3D nanoscale topography of LaMnO3 thin films, focusing on the influence of calcination temperature on surface morphology. The study reveals significant structural, chemical, and morphological changes as a function of the calcination temperature. XRD analysis confirmed the formation of the orthorhombic LaMnO3 structure at 700 °C, 750 °C, and 800 °C, with increasing unit cell volume and crystallite size observed at higher temperatures. FTIR spectra identified characteristic functional groups associated with molecular vibrations, indicating the perovskite structure. SEM imaging showed grain growth with temperature, while EDS analysis confirmed compound formation and substrate interactions. AFM analysis revealed increased surface roughness with temperature, attributed to nucleation and crystal growth. Morphological and microtextural analyses further detailed changes in surface features, peaks, valleys, and voids. Fractal characterization highlighted variations in surface texture with temperature, with a decrease in dominant wavelength indicating changes in microtexture complexity. Overall, the findings provide insights into the temperature-dependent properties of LaMnO3 thin films, essential for optimizing growth conditions and understanding their potential applications in various fields.

Climatic temperature and precipitation jointly influence body size in species of western rattlesnakes.

Both the metabolic theory of ecology and dynamic energy budget theory predict that climate influences body size through its effects on first-order determinants of energetics: reactive temperatures, carbon resources and oxygen availability. Although oxygen is seldom limiting in terrestrial systems, temperature and resources vary spatially. We used redundancy analyses and variation partitioning to evaluate the influence of climatic temperature, precipitation and their seasonalities on multivariate body size across the distributions of four species of the western rattlesnake group in North America (Crotalus pyrrhus, C. scutulatus, C. oreganus and C. viridis). Most species showed a pattern of increased body size in cooler, mesic climates and decreased body size in warmer, xeric climates. Exceptions to the pattern provided additional context through climatic idiosyncrasies in the distributions of each species. For example, the general pattern of a negative influence of temperature on body size was not apparent for C. oreganus, which ranges across the mildest climates overall among the four species. In contrast to previous studies, we found that seasonality had negligible effects on body size. We suggest that precipitation gradients correlate positively with resource availability in driving intraspecific body size and that temperature compounds this gradient by increasing baseline metabolic demands and restricting activity in particularly warm or otherwise extreme climates.

Modeling simulation and output characteristic analysis of PEMFC

Abstract Facing the dual problems of environmental pollution and energy shortage, PEMFC has become a research hotspot because of its high energy conversion efficiency and non-pollution. In this paper, theoretical voltage and various loss voltages of PEMFC were analyzed in detail, and PEMFC was modeled in Simulink using an empirical formula. The influence of temperature, gas pressure, and film water content on output characteristics of PEMFC was explored by using the control variable method, and it was concluded that the parameter values of the three could be improved within a certain range. Both can improve the output characteristics of PEMFC, which provides certain reference significance for the control of PEMFC.

Synthesis of Praseodymium Doped Lutetium and Gadolinium Aluminum Garnets Modified by Scandium and Boron to Improve Luminescence Properties

The structural and luminescence properties of the Lu3Al4Sc1O12:Pr and Gd3Al3Sc2O12:Pr garnet scintillators co-doped with boron (B3+) ions were investigated. The addition of B3+ and Sc3+ to the structure has a positive effect on the luminescence properties, especially on the photo, radio emission intensities, quantum efficiency, and results in a reduction of the decay time, which is necessary for high-quality scintillators. Structural properties of garnets have been determined after X-ray diffraction analysis coupled with Rietveld refinement. Surface morphology analysis was performed using a scanning electron microscope and particle size was also determined. Elemental composition was confirmed by the ICP-OES technique. Reflection, excitation (in the UV and VUV range), emission (upon excitation by UV or X-rays), decay time, and quantum efficiency at room temperature were measured. Furthermore, the influence of temperature on excitation, emission, and decay curves was also analyzed. The obtained luminescence properties indicated positive effect caused by doping.

The Influence of Atmospheric Air Temperature on the Consumption of Natural Gas in Terms of Heating Costs of a Single-Family Building – A Case Study

The Influence of Atmospheric Air Temperature on the Consumption of Natural Gas in Terms of Heating Costs of a Single-Family Building – A Case Study

Microstructures and properties of Pr,Ce:Gd2O2S ceramics fabricated from powders synthesized at different initial water bath temperatures

Crystallized precursor with stacked layered was synthesized in hot water bath using oxide powders and concentrated sulfuric acid as raw materials. Gd2O2S powders with high phase purity were obtained by reducing the precursor under flowing hydrogen atmosphere. The influence of initial bath temperature of Gd2O3 and H2SO4 on the microstructure of Gd2O2S powders was investigated. The Gd2O2S:Pr,Ce powders showed a stacked layered structure and as the initial water bath temperature increases, the particle size of the flaky powders also increases. Using the synthesized powders, Gd2O2S:Pr,Ce scintillation ceramics were fabricated through pre-sintering in vacuum followed by HIP post-treatment in argon atmosphere. The Gd2O2S:Pr,Ce ceramics fabricated from the powders synthesized at lower initial water bath temperature show a rapid densification rate during pre-sintering. The Gd2O2S:Pr,Ce ceramic sample fabricated from powders synthesized at 7°C showed the highest optical transmittance, XEL intensity, and light yield value of 25,800 ph/MeV @ 662 keV γ rays. The PL decay time of Pr3+3P0→3H4 transition was measured to be ∼2.87 μs for all ceramic samples. The effect of the initial water bath temperature on optical transmittance and light yield of Gd2O2S:Pr,Ce ceramics was also discussed.

Copper oxides CuO and Cu2O processed by spark plasma sintering—Electrical characterization and photo-activated conductivity

Commercial powders made of two copper oxides were compacted with spark plasma sintering (SPS). Their dielectric properties were studied in a broad range of frequencies and temperatures. Various relaxation phenomena were documented. DC resistivity was measured as well. Microstructure and phase composition were studied, and phase purity was shown for CuO, whereas Cu2O was more sensitive to carbon contamination during the SPS processing. Influence of the sintering temperature on microstructure and electrical properties was described for both materials. Change of DC resistivity induced by visible light irradiation was monitored for 48h. The overall difference between CuO and Cu2O from the electrical standpoint was finally not so dramatic as the stoichiometry indicated. Both materials exhibited giant permittivity, but extremely dependent on frequency and temperature. Application could find such systems mainly in the branch of sensors.