Inertial Flow Research Articles

Discovering Variability in Population of T-Lymphocyte Subsets Present in Peripheral Blood of Patients Co-Infected by HIV and HBV Through Laboratory Medicine

An alarming number of 296 million individuals in Egypt have recently been diagnosed as HBV positive; because these two viruses share similar routes of transmission, about 10% of this population is also thought to be HIV positive. It is widely acknowledged that coinfection with HIV and HBV has a significant negative effect on the immune system and accelerates the loss of T-lymphocyte subpopulations, which are essential for immunological defense. This enlightening study, carried out in Cairo, Egypt, explores the complicated dynamics of T-cell subsets and carefully looks at the immunological effects and frequency of coinfection between HIV and HBV. Naturally, of the 35 patients in the cohort under examination, an impressive 8.4% had coinfections with HBV and HIV. Systematic immunophenotyping of several T-cell subsets, such as CD4+, CD8+, CD45RO, CD16+56, and CD45RA, was used in the study, and the results showed clear differences between coinfected and mono-infected peopleUsing trustworthy methods like microfluid inertial separation and flow cytometry has given researchers significant insights into the complex immunological circumstances connected to HIV/HBV coinfection. Interestingly, a significant decrease in CD4+ cells—a crucial marker of HIV progression—was observed in over 50% of the coinfected patients, suggesting an accelerated course of the illness in these individuals. Moreover, the study establishes the foundation for particular treatment strategies and adds to our scientific understanding coinfection dynamics. These therapies, based on the study’s detailed findings, can potentially improve patient outcomes despite this difficult coinfection setting. To manage the difficulties of HIV/HBV coinfection, the research emphasizes the importance of ongoing attention and the incorporation of cutting-edge diagnostic techniques, eventually advancing public health activities.

Deciphering the Evolution of Inertial Migration in Serpentine Channels.

Serpentine channels coupling inertial and secondary flows enable effective particle focusing and separation, showing great potential in clinical diagnostics and drug screening. However, the nonsteady secondary flows in the serpentine channel make the evolution of inertial migration unclear, hindering the development and application of the serpentine channel. Herein, to refine the inertial migration mechanism, we established a model with varying curvature ratios to study the effect of secondary flow on particle migration in the serpentine channel. This method used direct numerical simulation (DNS) to calculate inertial lift, mapped the inertial lift to cross sections of the serpentine channel, and deciphered the inertial migration by using the Lagrangian particle tracking (LPT) method. The inertial migration of microparticles is experimentally investigated to validate the established numerical model. The results indicate that particle migration in serpentine channels follows a two-stage migration. An increase in secondary flow accelerates the second stage of the migration process while slowing the first stage process. Subsequently, we investigated the effects of different parameters, including Reynolds number, aspect ratio, and blockage ratio, on the equilibrium positions of particles, providing guidelines for the high-resolution separation of particles. Taking flow resistance into account, the dimensionless study makes the separation of arbitrary-sized particles possible. This work reveals the migration mechanism in serpentine channels, paving the way for the inertial separation of the particles.

Inertial flow-induced fluid pressurization enhances the reactivation of rate-and-state faults

We reveal that inertial flow can introduce additional pressure perturbations which accelerate the instability of critically stressed faults. We integrate a poroelastic spring-slider model with rate-and-state friction (RSF), a nonlinear flow model characterized by the improved Izbash equation, and a universal visco-inertial permeability model. The effect of inertial flow depends on the fracture network properties, proximity to faults, and injection parameters. Significant inertial flow results in higher pressure magnitudes and pressurization rates, causing notable differences in predictions between linear and nonlinear flow models, as well as aging and slip laws. The impact of inertial flow is particularly pronounced within a specific permeability range and is enhanced by high-rate injections. The fault reactivation is delayed due to fault strengthening with RSF in response to increased pressurization rates. Conversely, the presence of inertial flow enhances fault reactivation and promotes unstable slip behaviors. Furthermore, the results demonstrate that cyclic injection increases the critical stiffness of faults without an adequate release of pore pressure in each cycle. The time interval of the cyclic injection is prolonged as inertial flow generates higher pressure levels. This study highlights the importance of inertial flow in the stability analysis of critically stressed faults.

Visual depiction and numerical characterization of intricate flow in triply periodic minimal surface foams

Benefiting from the structural specificity and programmability, the bioinspired triply periodic minimal surfaces (TPMSs) bring excellent physicochemical properties that are distinct from conventional topologies. Especially with the rapid development of additive manufacturing and high-performance computing capacities, function-oriented design and synthesis of smart TPMS materials or devices have become feasible. Therefore, understanding the flow characterizations induced by TPMS foams is of remarkable importance to the successful design and practical operation. However, the in-depth studies and theoretical guidance on the relationship between structure and flow characterizations of TPMS foams are still limited. In this study, an Eulerian and Lagrangian coupled model is developed to investigate the internal flow behaviors and flow regime transition mechanism from creeping to inertial flow in four representative TPMS foams. The simulation accuracy is then validated by a high-resolution pore-scale flow field observation. Results show that the flow morphology and pressure drop characteristics are highly influenced by TPMS geometry and Re. Among which, Schwarz Diamond (D), Schoen Gyroid (G), and Fischer-Koch S (S) foams are more susceptible to radial flow disturbance, while Schoen inverted Weissenberg periodic foam to axial flow disturbance. In addition, higher porosities delay the transition to transitional regime of the flow. This work establishes firm theoretical and methodological foundations for the customization and intelligent development of bioinspired TPMS foam materials in broad fluidic applications.

Study on the stability and ultra-low frequency oscillation suppression method of pumped storage power plant with dual units sharing one pipeline

This paper aims to investigate the stability of the pumped storage power plant (PSPP) with dual units sharing one pipeline (DUSOP) and the method of suppressing the ultra-low frequency oscillation (ULFO) characteristics. Firstly, four nonlinear models of pumped storage regulation system (PSRS) with DUSOP are established under the design scenarios of no surge tank, upstream surge tank (UST), downstream surge tank, and upstream and downstream dual surge tanks. Then the stability of the PSRS under different surge tank arrangements (STAs) in the long diversion system design scenarios (LDSDS) is comparatively analyzed. Finally, based on the concept of stability margin, the influence mechanism of the operating points on the ULFO characteristics is investigated in the LDSDS with UST, and the influence of the governor parameters, hydrodynamic parameters, and mechanical parameters on the damping ratio and frequency of the system is also analyzed. The results show that among STAs, the design scheme of arranging the UST is more reasonable for PSPP with LDSDS from the comprehensive consideration of the economy of the project and the stability of the system. For PSPP with UST, on the line of equal stability margin, increasing the proportional gain, reducing the unit inertia time constant, reducing the water flow inertia time constant, and appropriately increasing the area of the surge tank can increase the frequency and reduce the amplitude, which is conducive to the suppression of ULFO. In the stability domain range, increasing the proportional gain increases the frequency and the system stability increases and then decreases. Increasing the integral gain decreases the frequency and then increases the system stability. At the same time, the frequency of the unit can be changed by adjusting the parameters of the system to avoid resonance between the frequency of the unit and the frequency of the power grid and to ensure the stability and safety of the unit operation.

Relative permeabilities for two-phase flow through wellbore cement fractures

Multiple fluids are likely to exist in fractures and flow paths associated with leaky wellbores, including liquids (e.g., crude oil) and gases (e.g., gas exsolved from liquid). These fluids occupy and move through different portions of the pore spaces within the fractures depending on many factors, including fluid properties, fracture size, and the amount of the different fluids. Upward leakage of any phase, through the fracture, can contaminate water-bearing formations, create hazardous surface conditions, and compromise the functionality of the wellbore. Early signs of wellbore leaks may be expressed by anomalous pressure behavior at surface monitoring points on cavern storage wells. These pressure anomalies are difficult to interpret, necessitating knowledge of the factors that affect the multiphase flow in fractures and porous media. These parameters are critical to modeling multiphase flow in fractures. This insight can guide further diagnosis and maximize leak remediation. Our study focuses on the relationship of the liquid–gas relative permeabilities for representative variable-aperture wellbore cement fracture. To obtain the relative permeability of each phase, two-phase flow tests were conducted where both fluids were flowing simultaneously through a fractured wellbore cement specimen under a range of factors, namely (1) aperture size, (2) capillary numbers, and (3) viscosity ratio. The flow experiments were conducted under a range of confining stresses and flow velocities, using nitrogen gas and silicone oils (of different viscosities) in a specially designed pressure vessel. The sum of gas and oil relative permeabilities were found to be less than one under all conditions, which indicates that the presence of one phase affects the permeability of the other phase, and vice versa. Since the gas phase flow conditions include a significant inertial flow component in addition to viscous flow, the inertial flow coefficients at different saturation states are presented. The factors affecting the relationship between the relative permeabilities are discussed in detail. A new mathematical model for estimating the relative permeability of wellbore cement fracture is presented and experimentally validated.

Investigation on the dynamic characteristics for high-speed mechanical seal considering turbulent cavitating flow and inertia effect

PurposeThis study aims to investigate the dynamic characteristics of a high-speed mechanical seal by considering the flow regime, cavitation phenomenon and inertia effect.Design/methodology/approachBased on the high-speed conditions of a mechanical seal with a low-viscosity fluid, a multi-factor coupled lubrication model of a mechanical seal is established. The perturbation Reynolds equation set is derived using the perturbation method, and the effects of turbulent flow and inertia on sealing performance are discussed.FindingsThe results indicate that turbulence significantly influences the dynamic characteristics of low-viscosity fluids under high-speed conditions.Originality/valueThe results of the dynamic characteristics presented in this study are expected to provide guidance for the design of mechanical seals.

Tailored micromixing in chemically patterned microchannels undergoing electromagnetohydrodynamic flow.

The study unveils a simple, non-invasive method to perform micromixing with the help of spatiotemporal variation in the Lorentz force inside a microchannel decorated with chemically heterogeneous walls. Computational fluid dynamics simulations have been utilized to investigate micromixing under the coupled influence of electric and magnetic fields, namely, electromagnetohydrodynamics, to alter the direction of the Lorentz force at the specific locations by creating the reverse flow zones where the pressure gradient, . The study explores the impact of periodicity, distribution, and size of electrodes alongside the magnitude of applied field intensity, the flow rate of the fluid, and the nature of the electric field on the generation of the mixing vortices and their strength inside the microchannels. The results illustrate that the wall heterogeneities can indeed enforce the formation of localized on-demand vortices when the strength of the localized reverse flow overcomes the inertia of the mainstream flow. In such a scenario, while the vortex size and strength are found to increase with the size of the heterogeneous electrodes and field intensities, the number of vortices increases with the number of heterogeneous electrodes decorated on the channel wall. The presence of a non-zero pressure-driven inflow velocity is found to subdue the strength of the vortices to restrict the mixing facilitated by the localized variation of the Lorentz force. Interestingly, the usage of an alternating current (AC) electric field is found to provide an additional non-invasive control on the mixing vortices by enabling periodic changes in their direction of rotation. A case study in this regard discloses the possibility of rapid mixing with the usage of an AC electric field for a pair of miscible fluids inside a microchannel.

Optimization of governor parameters for transient process of hydropower system with two turbine units sharing a super long headrace tunnel

AbstractThe governor parameters affect the stability and regulation quality of hydropower system with two turbine units sharing a super long headrace tunnel (SLHT). To improve the transient process of hydropower system, this study investigates the optimization of governor parameters. First, the model of hydropower system with two turbine units sharing an SLHT is established. Second, the optimization scheme of governor parameters for transient process of hydropower system is designed by genetic algorithm. The mathematical formulation of genetic algorithm is illuminated. The implementation procedure of genetic algorithm is illustrated. Then, the optimization results of governor parameters by genetic algorithm are analyzed by illustrating the regulation quality of hydropower system under two operating conditions. Finally, the effect of asymmetrical factors on optimal governor parameters is revealed. The asymmetrical layout of bifurcated penstocks, asymmetrical layout of turbine units, and asymmetrical load disturbances are considered. The results indicate that the objective function of hydropower system is composed of the dynamic indexes for frequency oscillations of two turbine units and water level oscillation in surge tank. The fitness function evolves in the direction that makes the regulation quality of hydropower system become better. Under the symmetrical or asymmetrical bifurcated penstocks, turbine units, and load disturbances, the optimal parameters of governors are asymmetrical. The regulation quality of hydropower system under the governor parameters of genetic algorithm is obviously better than that under the governor parameters of Stein formula. The optimal governor parameters are directly affected by the asymmetrical factors of hydropower system. With the increase of the flow inertia of one bifurcated penstock, the optimal parameters of the other governor become greater.

An experimental study of fluid–structure interaction and self-excited oscillation in thin-walled collapsible tube

Flow through thin-walled collapsible tubes often exhibits a complex nonlinear interplay between fluid dynamics and structural mechanics. This paper presents findings from an experimental investigation employing quantitative analyses of structural deformation and flow fields through image analysis and particle image velocimetry (PIV) measurements. The results suggest that as Reynolds number (Re) increases, the tube experiences buckling and collapses under greater negative transmural pressures (Ptm) compared with no flow condition, indicating that increasing flow inertia delays the onset of collapse. The onset of self-excited oscillation is marked by a Re threshold. Beyond this threshold, self-excited oscillations occur within a specific range of Ptm. Small-amplitude, chaotic oscillations emerge at relatively low Re or when Ptm approaches the upper limit of the oscillation-inducing regime. Conversely, large-amplitude, periodic oscillations arise as Re increases and Ptm decreases. The frequency of oscillation escalates with increasing Re and decreasing Ptm, while amplitude peaks near the midpoint of the oscillation-inducing Ptm range. PIV results indicate that large-amplitude, periodic oscillations correlate with asymmetric jet flows that switch directions from cycle to cycle. Furthermore, self-excited oscillations reduce overall flow resistance, thereby mitigating flow limitations under highly negative Ptm. These findings contribute to a deeper understanding of collapsible tube dynamics under varying flow conditions, with implications for diverse fields ranging from biomedical engineering to space physiology.

Parametric study on the margination of white blood cells (WBCs) in a passive microfluidic device

From fundamental research exploring molecular mechanisms to advanced endeavours like the development of artificial white blood cells, white blood cells have widespread applications due to their crucial role in safeguarding the body, defending against infection, and eliminating external pathogens, serving as indicators of several diseases. So, white blood cells must be separated efficiently with high purity to make the passive microdevices more effective for diagnostic applications. In this study, we investigated how cell concentration and viscosity collectively impact the margination of white blood cells in an inertial flow microchannel. We aim to improve white blood cell separation efficiency in microfluidic devices. Unlike previous studies that examined individual factors, this research focused on the interplay between bio-physical properties like cell interaction and viscosity. To explore their correlation, we diluted the blood with phosphate-buffered saline and viscoelastic fluid to manipulate the viscosity and cell concentration. Viscoelastic fluid improved white blood cells margination, while higher viscosity and low cell concentration decreased it. Maintaining blood-like viscosity, optimizing cell-free layer width, and promoting cell-cell interaction in the focusing zone collectively enhanced white blood cells margination.

Elasto-inertial focusing and particle migration in high aspect ratio microchannels for high-throughput separation

The combination of flow elasticity and inertia has emerged as a viable tool for focusing and manipulating particles using microfluidics. Although there is considerable interest in the field of elasto-inertial microfluidics owing to its potential applications, research on particle focusing has been mostly limited to low Reynolds numbers (Re<1), and particle migration toward equilibrium positions has not been extensively examined. In this work, we thoroughly studied particle focusing on the dynamic range of flow rates and particle migration using straight microchannels with a single inlet high aspect ratio. We initially explored several parameters that had an impact on particle focusing, such as the particle size, channel dimensions, concentration of viscoelastic fluid, and flow rate. Our experimental work covered a wide range of dimensionless numbers (0.05 < Reynolds number < 85, 1.5 < Weissenberg number < 3800, 5 < Elasticity number < 470) using 3, 5, 7, and 10 µm particles. Our results showed that the particle size played a dominant role, and by tuning the parameters, particle focusing could be achieved at Reynolds numbers ranging from 0.2 (1 µL/min) to 85 (250 µL/min). Furthermore, we numerically and experimentally studied particle migration and reported differential particle migration for high-resolution separations of 5 µm, 7 µm and 10 µm particles in a sheathless flow at a throughput of 150 µL/min. Our work elucidates the complex particle transport in elasto-inertial flows and has great potential for the development of high-throughput and high-resolution particle separation for biomedical and environmental applications.

Two-Dimensional Piezoelectric Nanofibrous Webs by Self-Polarized Assembly for High-Performance PM0.3 Filtration.

Particulate matter (PM) pollution has posed a serious threat to public health, especially the global spread of infectious diseases. Most existing air filtration materials are still subjected to a compromise between removal efficiency and air permeability on account of their stacking bulk structures. Here, we proposed a self-polarized assembly technique to create two-dimensional piezoelectric nanofibrous webs (PNWs) directly from polymer solutions. The strategy involves droplets deforming into ultrathin liquid films by inertial flow, liquid films evolving into web-like architectures by instantaneous phase inversion, and enhanced dipole alignment by cluster electrostatics. The assembled continuous webs exhibit integrated structural superiorities of nanoscale diameters (∼20 nm) of the internal fibers and through pores (∼100 nm). Combined with the wind-driven electrostatic property derived from the enhanced piezoelectricity, the PNW filter shows high efficiency (99.48%) and low air resistance (34 Pa) against PM0.3 as well as high transparency (84%), superlight weight (0.7 g m-2), and long-term stable service life. This creation of such versatile nanomaterials may offer insight into the design and upgrading of high-performance filters.

Hydrodynamic behavior of Janus particles in a finite inertial flow

Hydrodynamic behavior of Janus particles in a finite inertial flow is studied numerically using the lattice Boltzmann method (LBM) in the range of Reynolds number 0.05 ⩽ Re⩽ 10 and swimming parameter −3 ⩽ β ⩽ 3. Some results are validated by comparing with the existing results. The effects of Re, β on the hydrodynamic behavior of Janus particles are analyzed. The results show that the velocity of a pusher (a type of Janus particles) monotonically increases with the increase of Re, while the velocity of a puller (another type of Janus particles) exhibits a non-monotonic change. At high Re, the puller is unstable and presents a lateral displacement, while the pusher remains stable. The power consumption for the pusher and puller, the hydrodynamic efficiency for the pusher increase monotonically with increasing Re, while the hydrodynamic efficiency for the puller exhibits a non-monotonic change. At low Re, the power consumption and hydrodynamic efficiency of Janus particles exhibit symmetry with the variation of surface velocity distribution. This symmetry is disrupted with the increase of Re, similar to the velocity changing with the surface angle.

Colloid phase separation dynamics driven by chiral turbulent flows

Hydrodynamic interactions significantly influence phase-ordering kinetics in complex fluids. While passive fluid phase separation is well studied, the impact of active components remains relatively unexplored. We examine pure- and quasi-two-dimensional mixtures of attractive colloids and self-rotating particles in a solvent. Varying rotor rotational speed and area fraction yield diverse dynamic patterns such as percolated networks and round droplets composed of passive colloids alone. At intermediate rotation speeds, inertial chiral flows, accompanied by the inverse energy cascade, lead to self-similar power-law coarsening with a growth exponent of 1/2. The flows spontaneously organize within fluid domains, exhibiting turbulent and chiral characteristics. Surprisingly, these turbulent flows can sustain hexatic order hydrodynamically stabilized by the Magnus force under certain conditions. Conversely, at higher speeds, nonlinear hydrodynamic interactions impede phase separation. Our findings illuminate the intriguing dynamic interplay between phase separation and chiral turbulence, effectively bridging the realms of phase ordering and turbulent physics. Published by the American Physical Society 2024

Parametric investigation of flow and heat transfer on the reflooding quenching of a cylinder rod in forced convection

A reflooding quenching boiling experiment in forced convection was conducted to investigate the flow and heat transfer performance of a FeCrAl cylindrical rod under various subcooling degrees and flow rates. Employing image processing and inverse heat conduction problem (IHCP) methods, the research provides insights into vapor film thickness, quenching front propagation, wall temperature cooling rate and minimum film boiling temperature. Key observations include the presence of numerous extremely small bubbles dispersing around the rod and a third quenching front appears in the middle of the rod under higher subcooling condition at 25 °C, attributed to a thinner vapor film, smaller bubbles resulting from film rupture and the inertia of fluid flow. Within the experimental range, the impact of the subcooling degree on the fluid flow and heat transfer performance during the quenching boiling process is more pronounced than that of the coolant flow rate. The evolution of the vapor film indicates a substantial reduction of 78.76 % in film thickness and a significant increase of 185.71 % in propagation velocity with an increase in subcooling degree, while an elevation in flow rate lead to a 29.84 % decrease in film thickness and a 45 % increase in propagation velocity. Heat transfer performance benefits from increased subcooling degrees throughout the entire quenching boiling process, whereas flow rate impacts the heat transfer performance of film boiling alone. Furthermore, by incorporating the impact of flow velocity, a predictive formula for Tmin is established with an error margin within ±5 %.

Dynamic density functional theory with inertia and background flow.

We present dynamic density functional theory (DDFT) incorporating general inhomogeneous, incompressible, time-dependent background flows and inertia, describing externally driven passive colloidal systems out of equilibrium. We start by considering the underlying nonequilibrium Langevin dynamics, including the effect of the local velocity of the surrounding liquid bath, to obtain the nonlinear, nonlocal partial differential equations governing the evolution of the (coarse-grained) density and velocity fields describing the dynamics of colloids. In addition, we show both with heuristic arguments, and by numerical solution, that our equations and solutions agree with existing DDFTs in the overdamped (high friction) limit. We provide numerical solutions that model the flow of hard spheres, in both unbounded and confined domains, and compare with previously derived DDFTs with and without the background flow.

Asymmetry and intermittency in the rheo-inertial transition to turbulence in pipe flow

Transition to turbulence in pipe has been extensively studied but is still not completely understood and even more for non-Newtonian fluids. We focus here on yield stress shear-thinning fluids and the mechanism leading to the transition in pipe, the so-called rheo-inertial transition to turbulence. An experimental setup has enabled us to identify flow regimes in a cylindrical pipe, using both flow visualizations and pressure drops measurements for a range of Reynolds numbers. We delimited the non-Newtonian specific regime in the laminar-turbulent transition triggered at a critical Reynolds number below the turbulent puffs onset. This pre-transition regime is associated with a velocity profile asymmetry in which its degree and position evolve as the Reynolds number increases. The origin for the stability of this rheo-inertial regime is discussed, as it could be due to a competition between the nonlinear contributions of rheological behavior and flow inertia. Beyond this regime, we quantified the intermittence of puff transit, revealing the delay to turbulence. We spotted for the first time a different rheo-inertial transitional behavior in the intermittency evolution vs Reynolds number, displaying a smoother transition on a broader range. Finally, the critical Reynolds numbers for different yield stresses are compared with previous works, and the novelty is the linear increase in the delay to turbulent puffs with the yield stress.

International application of global forest product model and the reference to China

PurposeThis article summarizes the international scientific research output of global forest product models, infers future research trends and provides reference for quantitative analysis and mathematical modeling of Chinese forest product problems, with the aim of contributing to promoting domestic production of Chinese forest products and strengthening international trade competitiveness of forest products.Design/methodology/approachIn 1999, Joseph Buongiorno, a scholar at the University of Wisconsin in the United States of America, proposed the global forest products model (GFPM), which was first applied to research in the global forestry sector. GFPM is a recursive dynamic model based on five assumptions: macroeconomics, local equilibrium, dynamic equilibrium, forest product conversion flow and trade inertia. Using a certain year from 1992 to present as the base period, it simulates and predicts changes in prices, production and import and export trade indicators of 14 forest products in 180 countries (regions) through computer programs. Its advantages lie in covering a wide range of countries and a wide variety of forest products. The data mainly include forest resource data, forest product trade data, and other economic data required by the model, sourced from the Food and Agriculture Organization (FAO) of the United Nations and the World Bank, respectively.FindingsCompared to international quantitative and modeling research in the field of forest product production and trade, China's related research is not comprehensive and in-depth, and there is not much quantitative and mathematical modeling research, resulting in a significant gap. This article summarizes the international scientific research output of global forest product models, infers future research trends, and provides reference for quantitative analysis and mathematical modeling of Chinese forest product problems, with the aim of contributing to promoting domestic production of Chinese forest products and strengthening international trade competitiveness of forest products.Originality/valueOn the basis of summarizing and analyzing the international scientific research output of GFPM, sorting out the current research status and progress at home and abroad, this article discusses potential research expansion directions in 10 aspects, including the types, yield and quality of domestic forest product production, international trade of forest products, and external impacts on the forestry system, in order to provide new ideas for global forest product model research in China.

Bifurcation of equilibrium positions for ellipsoidal particles in inertial shear flows between two walls

We conducted a systematic numerical investigation of spherical, prolate and oblate particles in an inertial shear flow between two parallel walls, using smoothed particle hydrodynamics (SPH). It was previously shown that above a critical Reynolds number, spherical particles experience a supercritical pitchfork bifurcation of the equilibrium position in shear flow between two parallel walls, namely that the central equilibrium position becomes unstable, leading to the emergence of two new off-centre stable positions (Fox et al., J. Fluid Mech., vol. 915, 2021). This phenomenon was unexpected given the symmetry of the system. In addition to confirming this finding, we found, surprisingly, that ellipsoidal particles can also return to the centre position from the off-centre positions when the particle Reynolds number is further increased, while spherical particles become unstable under this increased Reynolds number. By utilizing both SPH and the finite element method for flow visualization, we explained the underlining mechanism of this reverse of bifurcation by altered streamwise vorticity and symmetry breaking of pressure. Furthermore, we expanded our investigation to include asymmetric particles, a novel aspect that had not been previously modelled, and we observed similar trends in particle dynamics for both symmetric and asymmetric ellipsoidal particles. While further validation through laboratory experiments is necessary, our research paves the road for development of new focusing and separation methods for shaped particles.