Indoor Air Samples Research Articles

Distribution of Phthalate Acid Esters in Indoor and Outdoor Air Samples Collected from Hanoi Metropolitan Areas in Vietnam

Distribution of Phthalate Acid Esters in Indoor and Outdoor Air Samples Collected from Hanoi Metropolitan Areas in Vietnam

Indoor microplastics: a comprehensive review and bibliometric analysis.

Indoor microplastic (MP) pollution is becoming a worldwide issue because people spend more time inside. Through dust and air, indoor MP pollution may harm human health. This review summarizes recent advancements in indoor MP research, covering pretreatments, quality control, filter membranes, and identification methods. Additionally, it conducts bibliometric analysis to examine the usage of keywords, publication records, and authors' contributions to the field. Comparatively, dust and deposition samples exhibit higher MP concentrations than indoor air samples. Fiber-shaped MPs are commonly detected indoors. The color and types of MPs display variability, with polypropylene, polyethylene, polyethylene terephthalate, and polystyrene identified as the dominant MPs. Indoor environments generally demonstrate higher concentrations of MPs than outdoor environments, and MPs in the lower size range (1-100µm) are typically more abundant. Among the reviewed articles, 45.24% conducted pretreatment on their samples, while 16.67% did not undergo any pretreatment. The predominant filter utilized in most studies was the Whatman Glass microfiber filter (41.67%), and MPs were predominantly characterized using µ-FTIR (19.23%). In the literature, 17 papers used blank samples, and eight did not. Blank findings were not included in most research (23articles). A significant increase in published articles has been observed since 2020, with an annual growth rate exceeding 10%. The keyword microplastics had the highest frequency, followed by fibers. This indoor MP study emphasizes the need for collaborative research, policymaking, and stakeholder involvement to reduce indoor MP pollution. As indoor MP research grows, so are opportunities to identify and minimize environmental and health impacts.

Exploration of microplastic concentration in indoor and outdoor air samples: Morphological, polymeric, and elemental analysis

Microplastics are ubiquitously pervasive throughout the environment, but unlike aquatic and terrestrial microplastics, airborne microplastics have received less scientific attention. This study is the first of its kind to explicitly examine microplastics in the indoor and outdoor air (PM2.5) samples collected using active air samplers in Islamabad, Pakistan. The suspected synthetic particles were analyzed using ATR-FTIR, μ-Raman and SEM-EDX to categorize them based on their morphological characteristics, polymeric composition, and elemental makeup. Microplastics were found in all indoor and outdoor air samples, with indoor air samples (4.34 ± 1.93 items/m3) being significantly more contaminated than outdoor air samples (0.93 ± 0.32 items/m3) (P < 0.001). Among all the indoor air samples, samples taken from classroom (6.12 ± 0.51 items/m3) were more contaminated than samples taken from hallway (4.94 ± 0.78 items/m3) and laboratory (1.96 ± 0.44 items/m3). Fibers were found to be the prevalent shape type in indoor and outdoor airborne microplastics followed by fragments. Transparent- and black colored microplastic particles were predominant in both indoor and outdoor air samples. According to ATR-FTIR analysis, polyethylene terephthalate (PET), polyethylene (PE), polypropylene (PP), and polystyrene (PS) were the most prevalent polymer types in both indoor and outdoor environments. Results from μ-Raman analysis corroborated the presence of the polymers identified by ATR-FTIR. Morphological analysis of particles by SEM indicated signs of weathering on particles' surface i.e., grooves, breaks, shredded edges, pits etc. SEM-EDX of randomly chosen particles unraveled the presence of C and O as core elements, along with the presence of heavy metals at some spots due to foreign material adhering to their surface. Correlation analysis of environmental factors i.e., PM2.5, relative humidity, temperature, and wind speed with MPs abundance revealed non-significant relationships. The findings of this study call for further research on airborne MPs to better comprehend their dispersion, toxicity, interactions with other air pollutants, and attributable health risks.

Indoor air bacterial load and antibiotic susceptibility pattern of isolates at Adare General Hospital in Hawassa, Ethiopia.

Air is the agent of pathogenic microbes that cause significant problems in the hospital environment. Multidrug resistance poses a major therapeutic challenge to these airborne microorganisms in hospital indoor environments. This study was conducted at Adare General Hospital in Hawassa City, Sidama, Ethiopia. A cross-sectional study was conducted. The proportional allocation method was used to select the sampled 50 rooms from the total available rooms in each category of wards and staff offices. A total of 100 indoor air samples were collected using settle plates in all units twice a day, morning (9:00-4:00 a.m.) and afternoon (3:00-4:00 p.m.). The types and number of colonies were determined in the laboratory, and the pathogenic bacteria were isolated by appropriate bacteriological techniques. Antimicrobial susceptibility testing was performed on Mueller-Hinton agar for each potentially pathogenic bacterium isolated. For each bacterium, a total of 12 antibiotics were tested using the Kirby-Bauer disk diffusion method. The test organism was adjusted to McFarland turbidity standards of 0.5. Data were entered and analyzed using the SPSS version 25 window. Descriptive analysis and one-way analysis of variance were performed. The indoor air bacterial load of Adare General Hospital was found in the range between 210 and 3,224 CFU/m3. The highest indoor air bacterial load was identified from the gynecology ward with a mean of 2,542.5CFU/m3 at p < 0.05. From 100 indoor air samples, a total of 116 bacterial pathogen isolates were obtained. Gram-positive isolates predominated at 72.4%, of which 37.1% were Staphylococcus aureus, 26.7% were coagulase-negative Staphylococci, and the rest 8.6% were Streptococcus pyogenes. The isolation of pathogenic bacteria Staphylococcus aureus and coagulase-negative Staphylococci showed a high level of resistance to ampicillin. A high bacterial load was found in the study area as compared to different indoor air biological standards. Staphylococcus aureus and coagulase-negative Staphylococci were the isolated predominant bacteria. Attention should be given to preventing and minimizing those environmental factors that favor the multiplication of bacteria in the indoor environment of a hospital for the safe health of patients, visitors, and staff.

Indoor Air Contamination by Yeasts in Healthcare Facilities: Risks of Invasive Fungal Infection

Introduction-Aims: Fungi are ubiquitous microorganisms that are easily dispersed through the air. In healthcare environments, indoor air can favor the spread of healthcare-associated fungal infections, compromising mainly immunocompromised hospitalized individuals. Therefore, this study aimed to evaluate indoor air contamination in healthcare environments, investigating mainly the presence of potentially pathogenic yeasts. Method: Indoor air samples were collected from 12 healthcare environments (hospital and medical clinics). After the growth, isolation, and purification of the yeast colonies, the isolates were identified by polymerase chain reaction using species-specific primers for yeasts of the genus Candida and sequencing of D1/D2 domains of the large ribosomal subunit (LSU rRNA). Results and interpretation: Fourteen yeast species were identified, including emerging pathogens. Species of clinical importance such as Candida parapsilosis, Candida glabrata, and Rhodotorula mucilaginosa were present. C. parapsilosis was the most prevalent species, followed by Rhodotorula mucilaginosa. In addition, we report the first occurrence of Candida orthopsilosis, Trichosporon mucoides, Fereydounia khargensis, and Hortaea werneckii in indoor air samples collected in healthcare environments. The present study shows that potentially fungal pathogens were present in air samples from healthcare environments, proving the role of indoor air in spreading infections. Therefore, monitoring air quality in healthcare environments is a fundamental approach to developing infection control measures, especially those related to invasive fungal infections.

Impacts of dust storms on indoor and outdoor bioaerosol concentration in the Sistan region of Iran

Monitoring indoor and outdoor bioaerosol concentrations is essential for environmental management and evaluation of the health impact of air pollution. This study assessed indoor and outdoor microbial air quality for two cities of the Sistan region in Iran, Zabol and Zahak, in summer (July and August) and autumn (October and November) of 2022. Indoor air quality was compared between two rooms with varying conditions associated with windows (living room: windows opened to the north and to the prevailing wind; bedroom: opened to the south and opposite to the prevailing wind). Bacterial concentrations were monitored using the settle plate method inside and outside household environments at 6:30 a.m., 10:30 a.m., 4:30 p.m., 7:30 p.m., and 12:30 a.m. Zahak exhibited higher PM10 and bacterial concentrations compared to Zabol. Bacterial concentrations in the outdoor environment were significantly higher than those in indoor air and also higher in summer than autumn in both cities. There was no significant difference in indoor air samples between the two rooms (p> 0.05) in Zabol, indicating that the bacteria pollution was similar in the two rooms. Diurnal and day-to-day patterns of airborne bacteria were similar in indoor and outdoor air, consistent with PM10 variations, pointing to the association between outdoor and indoor air quality. PM10 and bacterial concentrations peaked at 10:30 a.m. and were lowest at 4:30 p.m. Results of this study have implications for other dust-prone cities of the world and offer a valuable dataset for bacterial concentrations to compare with other regions of the world.

Method development for thermal desorption-gas chromatography-tandem mass spectrometry (TD-GC–MS/MS) analysis of trace level fluorotelomer alcohols emitted from consumer products

The scientific foundation for per- and polyfluoroalkyl substances (PFAS) measurements in water, soils, sediments, biosolids, biota, and outdoor air has rapidly expanded; however, there are limited efforts devoted to developing analytical methods to measure vapor-phase PFAS in indoor air. A gas chromatography-tandem mass spectrometry (GC–MS/MS) method coupled with thermal desorption (TD) sorbent tube analysis was developed to quantify trace levels of fluorotelomer alcohols (FTOHs) emitted from consumer products in the indoor environment. Method evaluation included determination of instrument detection limits (IDLs), quality assurance checks of target standards purchased from different vendors, sample loss during storage, and TD sorbent breakthrough with tubes coupled in-series. The IDLs for TD-GC–MS/MS analyses ranged from 0.07 – 0.09 ng/tube. No significant loss of FTOHs was observed during stability tests over 28 days with relative standard deviations (RSDs) of spiked TD tubes ranging from 3.1 – 7.7% and the RSDs of polypropylene copolymer vial storage of standard solutions ranging from 4.3 – 8.4%. TD tube breakthrough was minimal with recovered FTOHs in the second tubes <1% of the spiked concentrations in the first tubes with carrier gas volume up to 20 L. The method has been applied to determine FTOH emissions from three consumer products in micro-scale chambers. A liquid stone cleaner/sealer product contained the highest levels of 6:2, 8:2, and 10:2 FTOHs, while the mattress pad products contained lower levels of 8:2 and 10:2 FTOHs. The emission parameters, including the initial emission factors and first order decay rate constants, were obtained based on the experimental data. The developed methods are sensitive and specific for analysis of all four target FTOHs (4:2, 6:2, 8:2, 10:2 FTOHs) with chamber testing. The methods can be extended to indoor air sampling and could be applicable to ambient air sampling.

Polycyclic aromatic hydrocarbons including dibenzopyrenes in indoor air samples from schools and residences in Germany

Polycyclic aromatic hydrocarbons (PAH) are several hundred organic substances that are formed in the course of incomplete combustion of organic material. Of particular importance are the carcinogenic effects of PAH. Various dibenzopyrenes as well as benzo[c]fluorene (BcFl) seems to have a particular toxicological potency, which have hardly been investigated in indoor air so far.Therefore, the indoor air samples of 27 classrooms and 35 central living spaces of residences in Germany were collected to analyze 56 particle-bound PAH as well as naphthalene (Nap).The PM10 values in schools and residences ranged between 9.1 and 210 μg/m³ (mean: 93.4 μg/m³) and from 3.6 to 52.0 μg/m³ (mean: 12.0 μg/m³), respectively. For the sum of the 16 priority US EPA PAH (except acenaphthylene and naphthalene) means (95th percentiles) in classrooms and residences were 1.20 ng/m³ (2.77 ng/m³) and 0.84 ng/m³ (2.64 ng/m³), respectively. Higher values were observed for naphthalene with mean concentrations of 596 ng/m³ (2,800 ng/m³) in classrooms and 243 ng/m³ (530 ng/m³) in residences.For classrooms and residences mean concentrations of 8.3 pg/m³ and 7.4 pg/m³ for dibenzo[a,l]pyrene (DBalPyr), 16.4 pg/m³ and 11.9 pg/m³ for dibenzo[a,e]pyrene (DBaePyr), 9.2 and 5.7 pg/m³ for dibenzo[a,h]pyrene (DBahPyr), and 6.4 and 4.2 pg/m³ for BcFl were observed, respectively, while DBaiPyr was found in only one sample above LOD.The BaPeq (benzo[a]pyrene equivalents) for the sum of 20 PAH is on average 482 pgTEQ/m³ (schools) and 393 pgTEQ/m³ (residences), which corresponds to an incremental lifetime cancer risk to 42 × 10−6 and 34 × 10−6.Although dibenzopyrenes and BcFl are found only in very low concentrations in indoor air, they have a significant impact on the risk if the assumptions about the toxicological potency of this group turn out to be valid.

Effects of Corsi-Rosenthal boxes on indoor air contaminants: non-targeted analysis using high resolution mass spectrometry.

In response to COVID-19, attention was drawn to indoor air quality and interventions to mitigate airborne COVID-19 transmission. Of developed interventions, Corsi-Rosenthal (CR) boxes, a do-it-yourself indoor air filter, may have potential co-benefits of reducing indoor air contaminant levels. We employed non-targeted and suspect screening analysis (NTA and SSA) to detect and identify volatile and semi-volatile organic contaminants (VOCs and SVOCs) that decreased in indoor air following installation of CR boxes. Using a natural experiment, we sampled indoor air before and during installation of CR boxes in 17 rooms inside an occupied office building. We measured VOCs and SVOCs using gas chromatography (GC)high resolution mass spectrometry (HRMS) with electron ionization (EI) and liquid chromatography (LC) HRMS in negative and positive electrospray ionization (ESI). We examined area count changes during vs. before operation of the CR boxes using linear mixed models. Transformed (log2) area counts of 71 features significantly decreased by 50-100% after CR boxes were installed (False Discovery Rate (FDR) p-value < 0.2). Of the significantly decreased features, four chemicals were identified with Level 1 confidence, 45 were putatively identified with Level 2-4 confidence, and 22 could not be identified (Level 5). Identified and putatively identified features (Level ≥4) that declined included disinfectants (n = 1), fragrance and/or food chemicals (n = 9), nitrogen-containing heterocyclic compounds (n = 4), organophosphate esters (n = 1), polycyclic aromatic hydrocarbons (n = 8), polychlorinated biphenyls (n = 1), pesticides/herbicides/insecticides (n = 18), per- and polyfluorinated alkyl substances (n = 2), phthalates (n = 3), and plasticizers (n = 2). We used SSA and NTA to demonstrate that do-it-yourself Corsi-Rosenthal boxes are an effective means for improving indoor air quality by reducing a wide range of volatile and semi-volatile organic contaminants.

Characterization of airborne microplastics at different workplaces of the poly(ethylene:propylene:diene) (EPDM) rubber industry.

Microplastics (MPs) as an emerging air pollutant have received widespread attention, but research on airborne MPs at occupational sites is still limited, especially in the rubber industry. Hence, indoor air samples were collected from three production workshops and an office of a rubber factory producing automotive parts to analyze the characteristics of airborne MPs in different workplaces of this industry. We found MP contamination in all air samples from the rubber industry, and the airborne MPs at all sites mainly showed small-sized (< 100μm) and fragmented characteristics. The abundance and source of MPs at various locations is primarily related to the manufacturing process and raw materials of the workshop. The abundance of MPs in the air was higher in workplaces where production activities are involved than in office (360 ± 61 n/m3), of which the highest abundance of airborne MPs was in the post-processing workshop (559 ± 184 n/m3). In terms of types, a total of 40 polymer types were identified. The post-processing workshop has the largest proportion of injection-molded plastic ABS, the extrusion workshop has a greater proportion of EPDM rubber than the other locations, and the refining workshop has more MPs used as adhesives, such as aromatic hydrocarbon resin (AHCR).

Kitchen Characteristics and Practices Associated with Increased PM2.5 Concentration Levels in Zimbabwean Rural Households.

Household air pollution (HAP) from biomass fuels significantly contributes to cardio-respiratory morbidity and premature mortality globally. Particulate matter (PM), one of the pollutants generated, remains the most accurate indicator of household air pollution. Determining indoor air concentration levels and factors influencing these levels at the household level is of prime importance, as it objectively guides efforts to reduce household air pollution. This paper describes household factors associated with increased PM2.5 levels in Zimbabwean rural household kitchens. Our HAP and lung health in women study enrolled 790 women in rural and urban households in Zimbabwe between March 2018 and December 2019. Here, we report data from 148 rural households using solid fuel as the primary source of fuel for cooking and heating and where indoor air samples were collected. Data on kitchen characteristics and practices were collected cross-sectionally using an indoor walk-through survey and a modified interviewer-administered questionnaire. An Air metrics miniVol Sampler was utilized to collect PM2.5 samples from the 148 kitchens over a 24 h period. To identify the kitchen features and practices that would likely influence PM2.5 concentration levels, we applied a multiple linear regression model. The measured PM2.5 ranged from 1.35 μg/m3 to 1940 μg/m3 (IQR: 52.1-472). The PM2.5 concentration levels in traditional kitchens significantly varied from the townhouse type kitchens, with the median for each kitchen being 291.7 μg/m3 (IQR: 97.2-472.2) and 1.35 μg/m3 (IQR: 1.3-97.2), respectively. The use of wood mixed with other forms of biomass was found to have a statistically significant association (p < 0.001) with increased levels of PM2.5 concentration. In addition, cooking indoors was strongly associated with higher PM2.5 concentrations (p = 0.012). Presence of smoke deposits on walls and roofs of the kitchens was significantly associated with increased PM2.5 concentration levels (p = 0.044). The study found that kitchen type, energy type, cooking place, and smoke deposits were significant predictors of increased PM2.5 concentrations in the rural households. Concentrations of PM2.5 were high as compared to WHO recommended exposure limits for PM2.5. Our findings highlight the importance of addressing kitchen characteristics and practices associated with elevated PM2.5 concentrations in settings where resources are limited and switching to cleaner fuels may not be an immediate feasible option.

A Qualitative Assessment of Fungal Bioaerosols in the Indoor Air of the Sourô Sanou University Hospital Center of Bobo-Dioulasso, Burkina Faso

Introduction: Microbial bioaerosols in indoor hospital air are one of the main potential sources of nosocomial infections. This study aimed to assess the composition of fungal bioaerosols in the indoor air of the Sourô Sanou University Hospital Center (SSUHC) in Burkina Faso. Methods: This study was carried out in two departments of the SSUHC. The indoor air sampling was carried out from August to December 2019. Sample collection was performed using the passive sedimentation method and incubated at 30 °C for 48 to 96 h. A total of 267 samples were analysed. Fungal identification was conducted based on the macroscopic and microscopic features of fungi. Results: Of the 267 samples analysed, 369 isolates belonging to 12 genera were identified. Aspergillus spp. was the most frequently isolated fungal agent with 64%, followed by Rhizopus spp. and Mucor spp. with 19.5% and 5.7%, respectively. Cladosporium spp., Penicillium spp., and Rhizomucor spp. accounted for 2.7%, 2.7%, and 1.9%, respectively. Among the genus Aspergillus spp., the most frequently isolated was A. niger (34.3%), followed by A. flavus (30.9%) and A. fumigatus (19.9%). Conclusions: This study showed that Aspergillus spp. is the most common fungal bioaerosol isolated in the indoor air of the SSUHC in Burkina Faso.

Occurrence and risk of human exposure to organophosphate flame retardants in indoor air and dust in Hanoi, Vietnam

The presence and distribution of thirteen organophosphate flame retardants (OPFRs) were investigated in indoor air and dust samples collected in Hanoi, Vietnam. The total OPFRs (ƩOPFRs) concentrations in indoor air and dust samples were 42.3–358 ng m−3 (median 101 ng m−3) and 1290–17,500 ng g−1 (median 7580 ng g−1), respectively. The profile of OPFRs in both indoor air and dust indicated that tris(1-chloro-2-propyl) phosphate (TCIPP) was the most dominant compound with a median concentration of 75.3 ng m−3 and 3620 ng g−1, contributing 75.2% and 46.1% to ƩOPFRs concentrations in indoor air and dust, respectively, followed by tris(2-butoxyethyl) phosphate (TBOEP), with a median concentration of 16.3 ng m−3 and 2500 ng g−1, contributing 14.1% and 33.6% to ƩOPFRs concentrations in indoor air and dust, respectively. The levels of OPFRs in the indoor air samples and corresponding indoor dust samples showed a strong positive correlation. The total estimated daily intakes (EDItotal) of ƩOPFRs (via air inhalation, dust ingestion, and dermal absorption) for adults and toddlers under the median and high exposure scenarios were 36.7 and 160 ng kg−1 d−1, and 266 and 1270 ng kg−1 d−1, respectively. Among the investigated exposure pathways, dermal absorption was a primary exposure pathway to OPFRs for both toddlers and adults. The hazard quotients (HQ) ranged from 5.31 × 10−8 to 6.47 × 10−2 (<1), and the lifetime cancer risks (LCR) were from 2.05 × 10−11 to 7.37 × 10−8 (<10−6), indicating that human health risks from exposure to OPFRs in indoor environments are not significant.

Volatile Organic Compound Emissions from Disinfectant Usage in the Home and Office.

Volatile Organic Compound Emissions from Disinfectant Usage in the Home and Office.

Path Planning of Indoor Air Sampling Pipe in Substations Based on Fast Extended Random Number Algorithm

The substation is a fire accident-prone place, the substation fire automatic alarm system optimization design is an organic part of the fire safety work, and the substation air sampling pipe laying structure design method is an important link. In this paper, the substation model and sampling space are established, and the root node of the tree is searched by fast random in the RRT random algorithm to generate random sampling points and find out the path node nearest to the random sampling points. If so, the distance between the two points is less than the length, and the target point is considered to have been reached. This method can search the three-dimensional space quickly and solve the problem of the path planning of the air sampling pipe in the complex environment of the substation.

PCDD/Fs in indoor environments of residential communities around a municipal solid waste incineration plant in East China: Occurrence, sources, and cancer risks

Prolonged exposure to polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) can pose several adverse outcomes on human health. However, there is limited information on public health associated with indoor PCDD/F exposure in residential environments. Here, we examined PCDD/F concentrations in indoor air and indoor dust samples obtained from households near a municipal solid waste incineration (MSWI) plant. Our measurements revealed that the toxic equivalent (TEQ) concentrations of PCDD/Fs in indoor air ranged from 0.01 to 0.05 pg TEQ/m3, which were below intervention thresholds (0.6 pg TEQ/m3). Additionally, the TEQ concentrations of PCDD/Fs in indoor dust ranged from 0.30 to 11.56 ng TEQ/kg. Higher PCDD/F levels were found in household dust in the town of Taopu compared to those in the town of Changzheng. Principal component analysis (PCA) of PCDD/Fs suggested that waste incineration was the primary source of PCDD/Fs in indoor air, whereas PCDD/Fs in indoor dust came from multiple sources. The results of the health risk assessment showed the carcinogenic risk due to indoor PCDD/F exposure was higher for adults than for nursery children and primary school children. The carcinogenic risks of PCDD/Fs for age groups residing near the MSWI plant were all less than the risk threshold (10−5). Our findings will help to better understand the levels of PCDD/F exposure among urban populations living in residential communities around the MSWI plant and to formulate corresponding control measures to reduce probabilistic risk implications.

Widespread distribution of phthalic acid esters in indoor and ambient air samples collected from Hanoi, Vietnam.

In the present study, distribution characteristics of ten typical phthalic acid esters (PAEs) were investigated in 90 air samples collected from the urban areas in Hanoi, Vietnam from May to August 2022. The total concentrations of PAEs in indoor and ambient air samples were in the range of 320-4770ng/m3 and 35.9-133ng/m3, respectively. Total concentrations of PAEs in indoor air were about one order of magnitude higher than those in ambient air. Among PAEs studied, di-(2-ethyl)hexyl phthalate (DEHP) was measured at the highest levels in all air samples, followed by di-n-octyl phthalate (DnOP) and di-n-butyl phthalate (DnBP). The PAEs concentrations in air samples collected from laboratories at nighttime were significantly higher than those during daytime (p < 0.05). Meanwhile, the distributions of PAEs in various micro-environments in the same house are no statistically significant difference. The median exposure doses of PAEs through inhalation for adults and children were 248 and 725ng/kg-bw/d, respectively. These exposure levels were still lower than the respective reference doses (RfD) proposed by the US EPA for selected compounds such as diethyl phthalate (DEP), DnBP, and DEHP.

Combined Toxicity of the Most Common Indoor Aspergilli.

The most common Aspergilli isolated from indoor air samples from occupied buildings and a grain mill were extracted and analyzed for their combined (Flavi + Nigri, Versicolores + Nigri) cytotoxic, genotoxic and pro-inflammatory properties on human adenocarcinoma cells (A549) and monocytic leukemia cells induced in macrophages (THP-1 macrophages). Metabolite mixtures from the Aspergilli series Nigri increase the cytotoxic and genotoxic potency of Flavi extracts in A549 cells suggesting additive and/or synergistic effects, while antagonizing the cytotoxic potency of Versicolores extracts in THP-1 macrophages and genotoxicity in A549 cells. All tested combinations significantly decreased IL-5 and IL-17, while IL-1β, TNF-α and IL-6 relative concentrations were increased. Exploring the toxicity of extracted Aspergilli deepens the understanding of intersections and interspecies differences in events of chronic exposure to their inhalable mycoparticles.

Investigating the associations between organophosphate flame retardants (OPFRs) and fine particles in paired indoor and outdoor air: A probabilistic prediction model for deriving OPFRs in indoor environments

Contaminants of emerging concern such as organophosphate flame retardants (OPFRs) are associated with atmospheric fine particles (PM2.5), which pose the greatest health risk in the world. However, few surveys have explored the interaction between PM2.5 and OPFRs in residential paired indoor/outdoor environments. 11 priority OPFRs and PM2.5 were investigated across 178 paired indoor and outdoor air samples taken from 89 children’s households in southern Taiwan, across cold and warm seasons. This involved exploring their associations with building characteristics, interior materials, and human activities. We developed a probabilistic predictive model for indoor OPFRs based on the indoor/outdoor (I/O) ratio of contaminants and an air quality index. The significant associations of paired indoor/outdoor OPFRs and PM2.5 were explored. The indoor level of OPFRs was greater than that of outdoor households, contrasting with PM2.5. The I/O OPFRs ratio was higher than 1 (except for TEHP, EHDPP, and TCP), which suggests that the sources of OPFRs were primarily emitted from indoors. Indoor TCEP was significantly positively associated with indoor and outdoor PM2.5. The OPFR level detected in apartments was higher than in houses due to the greater decoration, furniture and electronic devices. However, this was not the case for PM2.5. TCIPP was the dominant compound in paired indoor and outdoor air. The indoor OPFR predictive model obtained a high accuracy with an R2 value of 0.87. The material used in mattresses, the use of purifiers and heaters, and the total material area were the main influencing factors for indoor OPFRs in households. These findings could provide important evidence of the interaction between paired indoor/outdoor OPFRs and PM2.5 and interior equipment in different building types. In addition, it could prevent the potential risks posed by indoor/outdoor air pollutants and eliminate OPFR emissions through the selection of better construction and building materials.

Indoor air surveillance and factors associated with respiratory pathogen detection in community settings in Belgium

Currently, the real-life impact of indoor climate, human behaviour, ventilation and air filtration on respiratory pathogen detection and concentration are poorly understood. This hinders the interpretability of bioaerosol quantification in indoor air to surveil respiratory pathogens and transmission risk. We tested 341 indoor air samples from 21 community settings in Belgium for 29 respiratory pathogens using qPCR. On average, 3.9 pathogens were positive per sample and 85.3% of samples tested positive for at least one. Pathogen detection and concentration varied significantly by pathogen, month, and age group in generalised linear (mixed) models and generalised estimating equations. High CO2 and low natural ventilation were independent risk factors for detection. The odds ratio for detection was 1.09 (95% CI 1.03–1.15) per 100 parts per million (ppm) increase in CO2, and 0.88 (95% CI 0.80–0.97) per stepwise increase in natural ventilation (on a Likert scale). CO2 concentration and portable air filtration were independently associated with pathogen concentration. Each 100ppm increase in CO2 was associated with a qPCR Ct value decrease of 0.08 (95% CI −0.12 to −0.04), and portable air filtration with a 0.58 (95% CI 0.25–0.91) increase. The effects of occupancy, sampling duration, mask wearing, vocalisation, temperature, humidity and mechanical ventilation were not significant. Our results support the importance of ventilation and air filtration to reduce transmission.