Individual Junctions Research Articles

The Resonant Interaction of Intrinsic Josephson Junctions With Standing Waves

IV-characteristics of shunted microbridges made of Tl2Ba2CaCu2O8 (TBCCO) were measured. The TBCCO films were grown epitaxially on 20° misaligned LaAlO3 substrates and then covered by the gold shunting layer. Each of the microbridges consisted of about 360 shunted intrinsic Josephson junctions. Self-induced resonant particularities with a main period of about 17 mV were found on IV-curves. We showed that these particularities did not depend on the characteristics of the individual junctions and that they were connected with the geometrical dimensions of the system. The origin of particularities was the interaction of Josephson generation with the standing wave appeared in the system. We modeled this interaction considering radiation of junctions into the transmission line and found that the model described the main resonant structure of IV-characteristics. Strong synchronization of junctions appeared in the vicinity of the first particularity.

History-dependent friction and slow slip from time-dependent microscopic junction laws studied in a statistical framework.

To study how macroscopic friction phenomena originate from microscopic junction laws, we introduce a general statistical framework describing the collective behavior of a large number of individual microjunctions forming a macroscopic frictional interface. Each microjunction can switch in time between two states: a pinned state characterized by a displacement-dependent force and a slipping state characterized by a time-dependent force. Instead of tracking each microjunction individually, the state of the interface is described by two coupled distributions for (i) the stretching of pinned junctions and (ii) the time spent in the slipping state. This framework allows for a whole family of microjunction behavior laws, and we show how it represents an overarching structure for many existing models found in the friction literature. We then use this framework to pinpoint the effects of the time scale that controls the duration of the slipping state. First, we show that the model reproduces a series of friction phenomena already observed experimentally. The macroscopic steady-state friction force is velocity dependent, either monotonic (strengthening or weakening) or nonmonotonic (weakening-strengthening), depending on the microscopic behavior of individual junctions. In addition, slow slip, which has been reported in a wide variety of systems, spontaneously occurs in the model if the friction contribution from junctions in the slipping state is time weakening. Next, we show that the model predicts a nontrivial history dependence of the macroscopic static friction force. In particular, the static friction coefficient at the onset of sliding is shown to increase with increasing deceleration during the final phases of the preceding sliding event. We suggest that this form of history dependence of static friction should be investigated in experiments, and we provide the acceleration range in which this effect is expected to be experimentally observable.

Light Beam‐Induced Current: 2D Characterization of OPV from Single and Tandem Cells to Fully Roll‐to‐Roll Processed Modules with and without Electrical Contact (Advanced Optical Materials 5/2014)

A new contactless light beam-induced current method can be used to identify defects in complex organic multilayer films such as flexible and roll-to-roll processed OPV and tandem OPV modules. In the case of tandem OPV, the method employed by F. C. Krebs and M. Jørgensen on page 465 uses two lasers with different wavelengths to address the individual junctions. Full roll-to-roll contactless testing with solar cells moving at constant speed is possible using a unique coupling scheme combined with signal processing.

Investigation of multi-junction solar cells using electrostatic force microscopy methods

Multi-junction III-V solar cells are designed to have a much broader absorption of the solar spectrum than Si-based or single junctions, thus yield the highest conversion. The conversion efficiency can be further scaled with sun concentration. The ability of high conversion efficiencies makes multi-junction prime candidates for fine-tuning explorations aimed at getting closer to the theoretical efficiencies. In this paper, we report on electrostatic force microscopy (EFM) measurements of the built-in potential of multi-junction III-V semiconductor-based solar cells. Kelvin probe force microscopy (KPFM) was employed to qualitatively study the width and electrical properties of individual junctions, i.e., built-in potential, activity, and thickness of the p-n junctions. In addition, the voltage drops across individual solar cell p-n junctions were measured using Kelvin probe microscopy under various operation conditions: dark; illuminated; short-circuit; and biased. We present a method which enables the measurement of a working structure, while focusing on the electrical characteristics of an individual junction by virtue of selecting the spectral range of the illumination used. We show that these pragmatic studies can provide a feedback to improve photovoltaic device design, particularly of operation under a current mismatched situation. This new analysis technique offers additional insights into behavior of the multi-junction solar cell and shows promise for further progress in this field.

Structural organization of signalling to and from IP3 receptors

In the 30years since IP3 (inositol 1,4,5-trisphosphate) was first shown to release Ca2+ from intracellular stores, the importance of spatially organized interactions within IP3-regulated signalling pathways has been universally recognized. Recent evidence that addresses three different levels of the structural determinants of IP3-evoked Ca2+ signalling is described in the present review. High-resolution structures of the N-terminal region of the IP3R (IP3 receptor) have established that the two essential phosphate groups of IP3 bind to opposite sides of the IP3-binding site, pulling its two domains together. This conformational change is proposed to disrupt an interaction between adjacent subunits within the tetrameric IP3R that normally holds the channel in a closed state. Similar structural changes are thought to allow gating of ryanodine receptors. cAMP increases the sensitivity of IP3Rs and thereby potentiates the Ca2+ signals evoked by receptors that stimulate IP3 formation. We speculate that both IP3 and cAMP are delivered to IP3Rs within signalling junctions, wherein the associated IP3Rs are exposed to a saturating concentration of either messenger. The concentration-dependent effects of extracellular stimuli come from recruitment of junctions rather than from a graded increase in the activity of individual junctions. IP3Rs within 'IP3 junctions' respond directly to receptors that stimulate phospholipase C, whereas extra-junctional IP3Rs are exposed to suboptimal concentrations of IP3 and open only when they are sensitized by cAMP. These results highlight the importance of selective delivery of diffusible messengers to IP3Rs. The spatial organization of IP3Rs also allows them to direct Ca2+ to specific intracellular targets that include other IP3Rs, mitochondria and Ca2+-regulated channels and enzymes. IP3Rs also interact functionally with lysosomes because Ca2+ released by IP3Rs, but not that entering cells via store-operated Ca2+ entry pathways, is selectively accumulated by lysosomes. This Ca2+ uptake shapes the Ca2+ signals evoked by IP3 and it may regulate lysosomal behaviour.

Photoelectrochemistry of core–shell tandem junction n–p+-Si/n-WO3microwire array photoelectrodes

Tandem junction (n–p^+-Si/ITO/WO_3/liquid) core–shell microwire devices for solar-driven water splitting have been designed, fabricated and investigated photoelectrochemically. The tandem devices exhibited open-circuit potentials of E_(∝) = −1.21 V versus E^0′(O_2/H_2O), demonstrating additive voltages across the individual junctions (n–p^+-Si E_(∝) = −0.5 V versus solution; WO_3/liquid E_(∝) = −0.73 V versus E^0′(O_2/H_2O)). Optical concentration (12×, AM1.5D) shifted the open-circuit potential to E_(∝) = −1.27 V versus E^0′(O_2/H_2O) and resulted in unassisted H_2 production during two-electrode measurements (anode: tandem device, cathode: Pt disc). The solar energy-conversion efficiencies were very low, 0.0068% and 0.0019% when the cathode compartment was saturated with Ar or H_2, respectively, due to the non-optimal photovoltage and band-gap of the WO_3 that was used in the demonstration system to obtain stability of all of the system components under common operating conditions while also insuring product separation for safety purposes.

Single-electron spin interplay for characterization of magnetic double tunnel junctions

Building on spin-modified Coulomb blockade theory, we derive an approximate analytical solution which matches closely to the existing numerical models in the limit of a large difference in the resistance of the two tunnel junctions. Using this, we are able to explore the properties of an $I(V)$ measurement for a double tunnel junction incorporating a nanoparticle in various magnetic configurations. It is shown that this information allows, under certain conditions, seven of the device's physical parameters to be determined in a single $I(V)$ sweep, including individual junction capacitances and spin-dependent resistances. The tunnel magnetoresistance and spin polarizations are also examined in the light of this solution and are shown to be similar in nature and dominated by the magnetic properties of the most resistive barrier. It is shown that spin injection and detection are theoretically possible in a single device containing a nonmagnetic nanoparticle, suggesting a novel means of measuring the tunnel spin polarization of ferromagnetic materials.

Nanosoldering Carbon Nanotube Junctions by Local Chemical Vapor Deposition for Improved Device Performance

The performance of carbon nanotube network (CNN) devices is usually limited by the high resistance of individual nanotube junctions (NJs). We present a novel method to reduce this resistance through a nanoscale chemical vapor deposition (CVD) process. By passing current through the devices in the presence of a gaseous CVD precursor, localized nanoscale Joule heating induced at the NJs stimulates the selective and self-limiting deposition of metallic nanosolder. The effectiveness of this nanosoldering process depends on the work function of the deposited metal (here Pd or HfB2), and it can improve the on/off current ratio of a CNN device by nearly an order of magnitude. This nanosoldering technique could also be applied to other device types where nanoscale resistance components limit overall device performance.

The Adherens Junction: A Mosaic of Cadherin and Nectin Clusters Bundled by Actin Filaments

SummaryCadherin and nectin are distinct transmembrane proteins of adherens junctions. Their ectodomains mediate adhesion while their cytosolic regions couple the adhesive contact to the cytoskeleton. Both these proteins are essential for adherens junction formation and maintenance. However, some basic aspects of these proteins, such as their organization in adherence junctions, have remained open. Therefore, using super-resolution microscopy and live-imaging, we focused on the subjunctional distribution of these proteins. We showed that cadherin and nectin in the junctions of A431 cells and human keratinocytes are located in separate clusters. The size of each cluster is independent of that of the adjacent clusters and can significantly fluctuate over time. Several nectin and cadherin clusters that constitute an individual adherens junction are united by the same actin filament bundle. Surprisingly, interactions between each cluster and F-actin are not uniform since neither vinculin nor LIM domain actin-binding proteins match the boundaries of cadherin or nectin clusters. Thus, the adherens junction is not a uniform structure but a mosaic of different adhesive units with very diverse modes of interaction with the cytoskeleton. We propose that such a mosaic architecture of adherence junctions is important for the fast regulation of their dynamics.

Experimental identification of the out-of-plane phonon mode of a few layered graphene from individual Au nanoparticle-Au film junctions

We can experimentally identify the layer-layer breathing mode and the other out-of-plane transverse acoustic phonon modes of a few layered graphene via employing z-polarized incident field formed at Au nanoparticle-Au film junctions. The observed out-of-plane mode phonon at ∼150 cm−1 and other transverse acoustic phonon type defect modes from 300 cm−1 to 700 cm−1 can be readily explored. Not only for the normally used optical method using focused plane wave but also direct applying the z-directional electromagnetic field on graphene will be expected for more detailed out-of-plane phonon characterization of graphene.

Assessing individual radial junction solar cells over millions on VLS-grown silicon nanowires

Silicon nanowires (SiNWs) grown on low-cost substrates provide an ideal framework for the monolithic fabrication of radial junction photovoltaics. However, the quality of junction formation over a random matrix of SiNWs, fabricated via a vapor–liquid–solid (VLS) mechanism, has never been assessed in a realistic context. To address this, we probe the current response of individual radial junction solar cells under electron-beam and optical-beam excitations. Excellent current generation from the radial junction units, compared to their planar counterparts, has been recorded, indicating a high junction quality and effective doping in the ultra-thin SiNWs with diameters thinner than 20 nm. Interestingly, we found that the formation of radial junctions by plasma deposition can be quite robust against geometrical disorder and even the crossings of neighboring cell units. These results provide a strong support to the feasibility of building high-quality radial junction solar cells over high-throughput VLS-grown SiNWs on low-cost substrates.

Backbone-Branched DNA Building Blocks for Facile Angular Control in Nanostructures

Nanotechnology based on the highly specific pairing of nucleobases in DNA has been used to generate a wide variety of well-defined two- and three-dimensional assemblies, both static and dynamic. However, control over the junction angles to achieve them has been limited. To achieve higher order assemblies, the strands of the DNA duplex are typically made to deviate at junctions with configurations based on crossovers or non-DNA moieties. Such strand crossovers tend to be intrinsically unstructured with the overall structural rigidity determined by the architecture of the nanoassembly, rather than the junction itself. Specific approaches to define nanoassembly junction angles are based either on the cooperative twist- and strain-promoted tuning of DNA persistence length leading to bent DNA rods for fairly large nano-objects, or de novo synthesis of individual junction inserts that are typically non-DNA and based on small organic molecules or metal-coordinating ligand moieties. Here, we describe a general strategy for direct control of junction angles in DNA nanostructures that are completely tunable about the DNA helix. This approach is used to define angular vertices through readily accessible backbone-branched DNAs (bbDNAs). We demonstrate how such bbDNAs can be used as a new building block in DNA nanoconstruction to obtain well-defined nanostructures. Angular control through readily accessible bbDNA building block provides a general and versatile approach for incorporating well-defined junctions in nanoconstructs and expands the toolkit toward achieving strain free, highly size- and shape-tunable DNA based architectures.

Electron transport through Ni/1,4-benzenedithiol/Ni single-molecule junctions under magnetic field

We have studied electron transport through Ni/1,4-benzenedithiol (BDT)/Ni single molecule junctions at cryogenic temperatures under magnetic field up to 250 mT. Instead of examining magnetoresistance (MR) of individual junctions, we measured the conductance of many junctions under a constant magnetic field and investigated how a single-molecule peak in a conductance histogram shifts with the field strength. We found that the single-molecule resistance at 77 K, deduced from the conductance peak position, shows a hysteresis against the field strength and takes a maximum around 50 mT when the magnetic field increases from 0 T to 150 mT. The observed resistance change yields a MR of ∼(80−90)% for Ni/BDT/Ni single molecule junctions. This MR is higher than experimental MR reported for non-conjugating molecules but consistent with high theoretical MR predicted for π-conjugated molecules such as BDT. We have also investigated the nonlinearity of the current-voltage (I−V) characteristics of Ni/BDT/Ni junctions under 0 T and 150 mT and found that the nonlinearity changes its sign from negative at 0 T to positive at 150 mT. This result suggests that the junction transmission spectrum at 0 T should have a low-lying peak within ±0.1 eV from the Fermi level, but the peak moves out of the bias window when the magnetic field increases to 150 mT. The observed field-induced change in the I−V nonlinearity is qualitatively consistent with theoretical I−V curves of Ni/BDT/Ni calculated for magnetized and non-magnetized Ni electrodes.

Ultrastructural uncoupling between T-tubules and sarcoplasmic reticulum in human heart failure

Chronic heart failure is a complex clinical syndrome with impaired myocardial contractility. In failing cardiomyocytes, decreased signalling efficiency between the L-type Ca(2+) channels (LCCs) in the plasma membrane (including transverse tubules, TTs) and the ryanodine receptors (RyRs) in the sarcoplasmic reticulum (SR) underlies the defective excitation-contraction (E-C) coupling. It is therefore intriguing to know how the LCC-RyR signalling apparatus is remodelled in human heart failure. Stereological analysis of transmission electron microscopic images showed that the volume densities and the surface areas of TTs and junctional SRs were both decreased in heart failure specimens of dilated cardiomyopathy (DCM) and ischaemic cardiomyopathy (ICM). The TT-SR junctions were reduced by ~60%, with the remaining displaced from the Z-line areas. Moreover, the spatial span of individual TT-SR junctions was reduced by ~17% in both DCM and ICM tissues. In accordance with these remodelling, junctophilin-2 (JP2), a structural protein anchoring SRs to TTs, was down-regulated, and miR-24, a microRNA that suppresses JP2 expression, was up-regulated in both heart failure tissues. Human heart failure of distinct causes shared similar physical uncoupling between TTs and SRs, which appeared attributable to the reduced expression of JP2 and increased expression of miR-24. Therapeutic strategy against JP2 down-regulation would be expected to protect patients from cardiac E-C uncoupling.

Linearization and Field Detectivity in Magnetic Tunnel Junction Sensors Connected in Series Incorporating 16 nm-Thick NiFe Free Layers

In this work, arrays of MgO-based magnetic tunnel junction elements <formula formulatype="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex Notation="TeX">$(5\times 20\ \mu{\rm m}^{2})$</tex> </formula> connected in series are studied for sensor applications. Linearization is obtained by combining shape anisotropy with a longitudinal hard bias field set by CoCrPt permanent magnets integrated on the sides of the array. We show that this architecture has the drawback of a large footprint in the chip, but is largely compensated by the weak bias voltage dependence and huge electric robustness, when comparing with individual magnetic tunnel junctions.

Facilitation of cytosolic calcium wave propagation by local calcium uptake into the sarcoplasmic reticulum in cardiac myocytes.

The widely accepted paradigm for cytosolic Ca(2+) wave propagation postulates a 'fire-diffuse-fire' mechanism where local Ca(2+)-induced Ca(2+) release (CICR) from the sarcoplasmic reticulum (SR) via ryanodine receptor (RyR) Ca(2+) release channels diffuses towards and activates neighbouring release sites, resulting in a propagating Ca(2+) wave. A recent challenge to this paradigm proposed the requirement for an intra-SR 'sensitization' Ca(2+) wave that precedes the cytosolic Ca(2+) wave and primes RyRs from the luminal side to CICR. Here, we tested this hypothesis experimentally with direct simultaneous measurements of cytosolic ([Ca(2+)](i); rhod-2) and intra-SR ([Ca(2+)](SR); fluo-5N) calcium signals during wave propagation in rabbit ventricular myocytes, using high resolution fluorescence confocal imaging. The increase in [Ca(2+)](i) at the wave front preceded depletion of the SR at each point along the calcium wave front, while during this latency period a transient increase of [Ca(2+)](SR) was observed. This transient elevation of [Ca(2+)](SR) could be identified at individual release junctions and depended on the activity of the sarco-endoplasmic reticulum Ca(2+)-ATPase (SERCA). Increased SERCA activity (β-adrenergic stimulation with 1 μM isoproterenol (isoprenaline)) decreased the latency period and increased the amplitude of the transient elevation of [Ca(2+)](SR), whereas inhibition of SERCA (3 μM cyclopiazonic acid) had the opposite effect. In conclusion, the data provide experimental evidence that local Ca(2+) uptake by SERCA into the SR facilitates the propagation of cytosolic Ca(2+) waves via luminal sensitization of the RyR, and supports a novel paradigm of a 'fire-diffuse-uptake-fire' mechanism for Ca(2+) wave propagation in cardiac myocytes.

Force–conductance correlation in individual molecular junctions

Conducting atomic force microscopy is an attractive approach enabling the correlation of mechanical and electrical properties in individual molecular junctions. Here we report on measurements of gold–gold and gold–octanedithiol–gold junctions. We introduce two-dimensional histograms in the form of scatter plots to better analyze the correlation between force and conductance. In this representation, the junction-forming octanedithiol compounds lead to a very clear step in the force–conductance data, which is not observed for control monothiol compounds. The conductance found for octanedithiols is in agreement with the idea that junction conductance is dominated by a single molecule.

Neuroligin-1 Loss Is Associated with Reduced Tenacity of Excitatory Synapses

Neuroligins (Nlgns) are postsynaptic, integral membrane cell adhesion molecules that play important roles in the formation, validation, and maturation of synapses in the mammalian central nervous system. Given their prominent roles in the life cycle of synapses, it might be expected that the loss of neuroligin family members would affect the stability of synaptic organization, and ultimately, affect the tenacity and persistence of individual synaptic junctions. Here we examined whether and to what extent the loss of Nlgn-1 affects the dynamics of several key synaptic molecules and the constancy of their contents at individual synapses over time. Fluorescently tagged versions of the postsynaptic scaffold molecule PSD-95, the AMPA-type glutamate receptor subunit GluA2 and the presynaptic vesicle molecule SV2A were expressed in primary cortical cultures from Nlgn-1 KO mice and wild-type (WT) littermates, and live imaging was used to follow the constancy of their contents at individual synapses over periods of 8–12 hours. We found that the loss of Nlgn-1 was associated with larger fluctuations in the synaptic contents of these molecules and a poorer preservation of their contents at individual synapses. Furthermore, rates of synaptic turnover were somewhat greater in neurons from Nlgn-1 knockout mice. Finally, the increased GluA2 redistribution rates observed in neurons from Nlgn-1 knockout mice were negated by suppressing spontaneous network activity. These findings suggest that the loss of Nlgn-1 is associated with some use-dependent destabilization of excitatory synapse organization, and indicate that in the absence of Nlgn-1, the tenacity of excitatory synapses might be somewhat impaired.

The Kinetics of Individual Grains in Polycrystalline Materials

Abstract Based on a mean-field approach a 3D grain growth model is presented which predicts the growth history of individual grains of a grain ensemble in terms of linear grain size and time. The analytical results are compared with the results of numerical simulations using the Monte-Carlo-Potts model. In addition, based on a stochastic model of grain growth, the diffusivity of the very discontinuous movements of individual quadruple and triple junctions is set in relation to the rate of growth. This allows the calculation of the average growth law of an ensemble of grains solely from the measurement of the stochastic growth kinetics of individual grains. The results from simulation and theory are compared with experimental results of in-situ scanning electron microscopy observations of grain growth in polycrystalline metals.

Growth History of Individual Grains in Polycrystals: Theoretical Model and Simulation Studies

A 3D grain growth model is developed based on a generalised mean-field approach. It allows the prediction of the growth history of individual grains of a polycrystal during normal grain growth, which has been compared with results from Monte Carlo Potts simulations showing a good agreement. Based on a stochastic grain growth model the diffusivity of the Brownian-like motion of individual quadruple points and triple junctions in 2D sections can be related to the average growth rate providing a possibility for the determination of the average growth law of the grain ensemble solely from the stochastic growth behaviour of single grains.