Individual Applications Research Articles

Exploring the impact of titanium dioxide nanoparticles (nTiO2) at varied concentrations in combination with Azospirillum brasilense on wheat growth and physiology

BackgroundNanoparticles (NPs), as a novel source of Nano fertilizers in crop production. Titanium dioxide nanoparticles (nTiO2) also have the potential to improve plant growth, but their effect on the wheat crop is not studied enough. Nothing is known about that how nTiO2 specifically effect on wheat crops especially with soil microbes and how much its dose is effective. Azospirillum brasilense is a promising bio-fertilizer that can be applied in combination with nano-fertilizers to increase crop productivity and can enhance the efficiency of other fertilizers. MethodsThe present study was planned to investigate the role of different doses of titanium dioxide nanoparticles (nTiO2) with Azospirillum brasilense on the growth and physiology of wheat, having three replications. Eleven treatments were planned in the field condition (T0 = Control (No A. brasilense and No nTiO2), T1 = nTiO2 @20 mg/L, T2 = nTiO2 @20 mg/L + A. brasilense, T3 = nTiO2 @30 mg/L, T4 = nTiO2 @30 mg/L + A. brasilense, T5 = nTiO2 @40 mg/L, T6 = nTiO2 @40 mg/L + A. brasilense, T7 = nTiO2 @50 mg/L, T8 = nTiO2 @50 mg/L + A. brasilense, T9 = nTiO2 @60 mg/L, T10 = nTiO2 @60 mg/L + A. brasilense) having randomized complete block design (RCBD). ResultsResults revealed that the individual application of A. brasilense showed significantly higher results in all treatments, but nTiO2 application shows a positive impact on wheat growth, yield, and physiological parameters when used in a lower concentration. nTiO2 @30 mg/L with A. brasilense gives the highest results as compared to all other treatments with the production of higher antioxidant enzymes, nutrient uptake, higher leaf area index, and photosynthesis. Use of nTiO2 @40 mg/L or with the higher dose negatively affects wheat crops, but with the A. brasilense application its negative effect control up to a certain level. ConclusionThis study highlights the potential advantages of combining A. brasilense with nTiO2, for the growth of wheat crops. While A. brasilense alone consistently produced favorable results, lesser doses of nTiO2 also showed promising results but with the combination of nTiO2 and A. brasilense @ 30 mg/L producing the greatest outcomes. The detrimental effects of excessive nanoscale titanium dioxide on plant growth and development, which may result in stress and physiological abnormalities in the plants, are probably the cause of the decrease in crop output at greater nTiO2 concentrations. However, care should be used while utilizing larger nTiO2 concentrations since they could harm wheat crop growth and yield.

Experience from radon in soil gas comparison measurements held in Czech Republic and in other countries, 1992–2022

Radon 222Rn, an inert natural radioactive gas, a daughter product in the 238U natural decay series, a source of alpha radiation, together with its short-lived decay products is a dominant source of absorbed radiation doses in the population. Rocks and building materials are fundamental sources of radon in dwellings. Elevated indoor radon activity concentration in houses and workplaces, surpassing recommended reference levels, is not desirable. Since radon penetrates into the houses from the geological basement, various technical aids for protection of houses have been developed. Their individual application derives from the radon potential of a building site. Radon risk mapping of building sites became a standard procedure for gauging the local radon potential. Various instruments and techniques of measurements of radon activity concentration in soil gas (Bq/m3) at building sites are available. Since radon in soil gas and radon measurement techniques are affected by several natural and technical conditions, resultant values of radon risk mapping by individual organizations vary, sometimes fundamentally. Radon comparison measurements at selected reference sites are an important tool for single organizations to verify their radon measuring procedures and reliability of their reported results. Based on legislative regulations, comparison measurements at established radon reference sites are a part of the obligatory activities for radon risk mapping at building sites in the Czech Republic. Experience and analyses of 30-year radon in soil gas comparison measurements in the Czech Republic show the dispersion of values reported by participating organizations and indicate that more than 10% of participants do not fulfill the established local criteria. This paper introduces requirements for the establishment of radon reference sites, documents their natural variability, recommends the procedure of radon comparison measurement, and analyses its results. A long-term experience was gained by testing organizations from the Czech Republic (1992–2022) as well as from the international comparison measurements organized in the Czech Republic and in several other countries (2010–2021).

Several inaccurate or erroneous conceptions and misleading propaganda about brain-computer interfaces.

Brain-computer interface (BCI) is a revolutionizing human-computer interaction, which has potential applications for specific individuals or groups in specific scenarios. Extensive research has been conducted on the principles and implementation methods of BCI, and efforts are currently being made to bridge the gap from research to real-world applications. However, there are inaccurate or erroneous conceptions about BCI among some members of the public, and certain media outlets, as well as some BCI researchers, developers, manufacturers, and regulators, propagate misleading or overhyped claims about BCI technology. Therefore, this article summarizes the several misconceptions and misleading propaganda about BCI, including BCI being capable of "mind-controlled," "controlling brain," "mind reading," and the ability to "download" or "upload" information from or to the brain using BCI, among others. Finally, the limitations (shortcomings) and limits (boundaries) of BCI, as well as the necessity of conducting research aimed at countering BCI systems are discussed, and several suggestions are offered to reduce misconceptions and misleading claims about BCI.

Bioaugmentation and vermicompost facilitated the hydrocarbon bioremediation: scaling up from lab to field for petroleum-contaminated soils.

The biodegradation of total petroleum hydrocarbon (TPH) in soil is very challenging due to the complex recalcitrant nature of hydrocarbon, hydrophobicity, indigenous microbial adaptation and competition, and harsh environmental conditions. This work further confirmed that limited natural attenuation of petroleum hydrocarbons (TPHs) (15% removal) necessitates efficient bioremediation strategies. Hence, a scaling-up experiment for testing and optimizing the use of biopiles for bioremediation of TPH polluted soils was conducted with three 500-kg pilots of polluted soil, and respective treatments were implemented: including control soil (CT), bioaugmentation and vermicompost treatment (BAVC), and a combined application of BAVC along with bioelectrochemical snorkels (BESBAVC), all maintained at 40% field capacity. This study identified that at pilot scale level, a successful application of BAVC treatment can achieve 90.3% TPH removal after 90 days. BAVC's effectiveness stemmed from synergistic mechanisms. Introduced microbial consortia were capable of TPH degradation, while vermicompost provided essential nutrients, enhanced aeration, and, potentially, acted as a biosorbent. Hence, it can be concluded that the combined application of BAVC significantly enhances TPH removal compared to natural attenuation. While the combined application of a bioelectrochemical snorkel (BES) with BAVC also showed a significant TPH removal, it did not differ statistically from the individual application of BAVC, under applied conditions. Further research is needed to optimize BES integration with BAVC for broader applicability. This study demonstrates BAVC as a scalable and mechanistically sound approach for TPH bioremediation in soil.

The Effect of Nonterminal Liquid Crystalline Epoxy Resin Structure and Curing Agents on the Glass Transition of Polymer Networks.

Modern science and technology demand a low glass transition temperature, yet one tailored to specific thermoset needs and specific to individual hardener applications. Two novel, nonterminal liquid crystalline epoxy resins (LCER) were synthesised, with their structures characterized via nuclear magnetic resonance (NMR), mass spectrometry (MS), and elemental analysis. Their liquid crystalline nature and thermal properties were determined using polarized optical microscopy (POM), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). A set of seven aromatic amines serving as curing agents was used to perform curing in fourteen different systems in order to assess the glass transition temperature (Tg) of the obtained polymer networks using DSC. The liquid crystalline elastomers were obtained with vitrification occurring in a low temperature range (-10-40 °C), with a more predictable outcome for amines with two aromatic rings in the structure than with one. Moreover, the resin with a core consisting of four aromatic rings produces networks with higher Tg than the three-aromatic resin. The use of nonterminal LCER allowed the lowering of the glass transition temperature of the polymers to more than 70 °C compared to a terminal analogue. This brings new possibilities of designing highly elastic yet cured polymers with potential for use in smart applications due to the LC nature of the resin.

Digital Technologies for Quality Assurance in the Construction Industry: Current Trend and Future Research Directions towards Industry 4.0

Despite the growing rich and fragmented literature focusing on quality assurance (QA) and Industry 4.0, the implementation of associated individual digital technologies has not been fully evaluated and synthesised to achieve adequate QA in the construction industry; hence, it has received limited focus. This study, thus, aimed to organise, evaluate, and synthesise the current literature on individual digital technology applications in QA in the construction industry and propose future research directions. A literature review approach was adopted for this study along with Deming’s cycle framework to address four research questions: (1) What is the status of the state-of-the-art in the literature? (2) What digital technologies have been applied for QA in the construction industry? (3) Which areas in QA processes have experienced digital technology applications, and what are the applications? (4) What are the limitations of the existing studies and future research directions of digital technologies for QA in the construction industry? The findings showed an increasing trend of research on digital technology for QA in construction since 2017. This cuts across 23 countries with six different research methods published across 18 different publication sources. Four categories of digital technologies were revealed to have been adopted for QA in construction based on the functionality of the technologies: data collection technologies, decision-oriented technologies, collaborative technologies, and transparency and security-related technologies. Evaluation with Deming’s cycle framework revealed that digital technologies have a high level of application at the “do” phase, improving the quality management process during construction towards achieving pre-stated quality requirements. This includes mostly collaborative technologies, consisting of BIM technologies. Limitations of the existing studies were further identified, and this led to five research directions: interoperability of technology development, integrated digital technologies for QA of prefabricated and modular construction, integrated digital technologies for QA of cross-border construction logistics and supply chain, digital innovation for sustainable QA, and moving beyond the technical solution. The study showed a significant contribution to both academia and the industry in the built environment.

Esterification of black bean anthocyanins with unsaturated oleic acid, and application characteristics of the product

Esterification of anthocyanins with saturated fatty acids have been widely investigated, while that with unsaturated fatty acids is little understood. In this study, crude extract (purity ∼ 35 %) of cyanidin-3-O-glucoside (C3G) from black bean seed coat was utilized as reaction substrate, and enzymatically acylated with unsaturated fatty acid (oleic acid). Optimization of various reaction parameters finally resulted in the highest acylation rate of 54.3 %. HPLC-MS/MS and NMR analyses elucidated the structure of cyanidin-3-O-glucoside-oleic acid ester (C3G-OA) to be cyanidin-3-O-(6″-octadecene)-glucoside. Introduction of oleic acid into C3G improved the lipophilicity, antioxidant ability, and antibacterial activity. Further, the color and substance stability analyses showed that the susceptibility of C3G and C3G-OA to different thermal, peroxidative, and illuminant treatments were highly pH dependent, which suggested individual application guidelines. Moreover, C3G-OA showed lower toxicity to normal cell (QSG-7701) and better inhibitory effect on the proliferation of HepG2 cells than C3G, which indicated its potential anti-tumor bioactivity.

Attitude towards mental help-seeking, motivation, and economic resources in connection with positive, negative, and general psychopathological symptoms of schizophrenia: a pilot study of a psychoeducation program.

Schizophrenia is typically treated with medication as the first approach, but additional strategies are necessary to enhance the effectiveness of this treatment for better outcomes. However, it is crucial to explore methods, alongside medication, that promote a positive attitude towards seeking mental health support and alleviate symptom severity among non-institutionalized individuals of different age groups in Pakistan. Thus, this pilot study aimed to utilize a psychoeducation program to enhance patients' motivation and attitudes toward seeking treatment, decrease symptom severity, and investigate the role of financial factors in their illness journey. In this preliminary investigation, our focus was on individuals who had been diagnosed with schizophrenia and were receiving treatment from various hospitals and primary care clinics. Following a thorough screening process, 255 participants met the eligibility criteria, and 220 completed the psychoeducation program. The study included both male and female participants, with 143 (56.08%) being men and 112 (43.82%) being women. Regarding marital status, 123 (48.24%) were single, 98 (38.43%) were married, and 34 (13.33%) were divorced widowers or widows. The age range of the respondents varied from 18 to 52 years, with a mean age of 35.45 and a standard deviation of 10.27. The results indicated a decrease in symptom severity following a 16-week psychoeducation program. The psychoeducation program significantly reduced the positive symptoms, negative symptoms, and general psychopathological symptoms among patients. Similarly, significant improvement was observed in patients' motivation toward treatment and they actively participated in treatment after getting psychoeducation about the treatment. Similarly, after the psychoeducation program significant improvement was seen in patients' attitudes towards help-seeking and perceived mental health functioning. In summary, the findings suggest that our psychoeducation program has the potential to positively impact the motivation and help-seeking attitudes of schizophrenia patients towards treatment. Moreover, there is a need for further exploration of psychoeducation programs for schizophrenia, particularly in countries facing economic challenges. This study paves the way for the development of an indigenous psychoeducation program tailored to Pakistani schizophrenia patients, with potential applicability for Urdu-speaking individuals. https://www.thaiclinicaltrials.org/show/TCTR20210208003, identifier TCTR20210208003.

Combined effect of silicon dioxide nanoparticles and plant-derived smoke solution on physiological and biochemical parameters of pea plant (Pisum sativum L.)

Nanomaterials exhibit distinctive advantages due to their characteristic size range falling within 1-100 nanometers, which can easily penetrate through plant cell membranes. The application of plant-derived smoke (PDS) solutions is also recognized for its beneficial impact on seed germination and growth of diverse plant species. In this context, in the present study, we investigated the effects of silicon dioxide nanoparticles (SiO2 NPs), PDS, and their combined application on pea seeds, and thereafter evaluated a spectrum of morphological and biochemical growth parameters. The results demonstrated that SiO2 NPs significantly enhanced pea seed germination, seedling length/weight, secondary root formation, as well as key biochemical indicators including photosynthetic pigments, total soluble sugars, and protein content. Notably, the PDS solution also exerted a significant positive influence on all growth parameters in comparison to that of SiO2 NPs. However, the combined application of SiO2 NPs and PDS exhibited superior effects on the morphological and biochemical growth characteristics as compared to their individual applications. From these findings, it can be concluded that both SiO2 NPs and PDS solutions, whether used independently or in combination, impart beneficial effects on the morphological and biochemical growth parameters of pea plants. This research highlights the potential of SiO2 NPs and PDS solutions as promising tools for enhancing plant growth and seedling development. Future studies could further explore the underlying mechanisms and optimize application methods for maximizing the beneficial effects of these materials, thus contributing to sustainable agricultural practices and improved crop yields.

Application of lecture-and-team-based learning in stomatology: in-class and online

BackgroundThis study aimed to evaluate stomatological students’ learning efficacy and their attitude towards Lecture-Team-Based Learning (LTBL) on topics regarding the design of removable partial dentures via in-class, online, and both in combination.MethodsStudents from seven distinct grades participated in the course in their fourth academic year (Years 2015, 2016, 2017, 2018, 2019, 2020, and 2021). Students of Years 2015–2019 attended in-class LTBL, students of Year 2020 attended online LTBL, and students of Year 2021 attended the combination mode. The scores of three examinations were compared, namely, individual readiness assessment test, team readiness assurance test, and individual application test. Visual Analog Scales (VAS) were used for students to self-assess their mastery of prosthodontics knowledge before and after the course. Anonymous questionnaires were delivered to evaluate their satisfaction with LTBL via a Likert scale.ResultsIn each academic year, the three exam scores were significantly improved as the course progressed and VAS-post scores were significantly higher than VAS-pre scores. The three examination and VAS scores of students in Year 2020 were significantly lower than those in Years 2019 and 2021. Students were highly satisfied with the LTBL course based on the three parameters of knowledge acquisition, teamwork, and classroom atmosphere.ConclusionStudents were highly satisfied with the LTBL course and their learning performance was improved as the course progressed both in-class and online. Online LTBL could be adopted when students have to study online, while in-class LTBL could perform better when combined with video records of an online LTBL course.

Enforcement of decisions of national courts in cases of compensation for damage caused as a result of armed conflicts

The relevance of the study is due to the lack of proper legal regulation in the field of legal determination of the procedure for executing a court decision under which a foreign state (aggressor or occupier) acts as a debtor. The purpose of the study is to develop a mechanism for effective protection of the rights of Ukrainian recoverers in cases of compensation for damage by the state aggressor through the prism of proper enforcement of court decisions in these categories of cases. In the course of the study, a number of general scientific and industry methods are applied, in particular, the method of analysis and synthesis, system, structural-functional, dialectical, historical, and hermeneutical methods. The paper analyses the legal positions of the European Court of Human Rights regarding the right to appeal to the court in cases of debt collection from a foreign state as compensation for material and/or moral damage caused to individual applicants. The study examines the practice of the national courts of Ukraine in cases of claims of individuals – citizens of Ukraine against a foreign state for compensation of material and (or) moral damage caused by the invasion of the territory of Ukraine. It is established that a state cannot be allowed to use the doctrine of sovereign immunity as a shield for its violations of other doctrines of international law, such as international law on armed conflicts. The expediency of applying the model of functional (limited) immunity, which is becoming increasingly widespread and recognised by advanced countries of the world, is justified, considering its practicality and compliance with modern requirements for the development of society and leading trends in the development of international law. The results of the study can be used for further scientific developments of the outlined problems in the rule-making process, both in the conclusion of international treaties and in national legislation and in the law enforcement process in the implementation of legal proceedings

Effectiveness of osteopathic manipulative applications on hypothalamic-pituitary-adrenal (HPA) axis in youth with major depressive disorder: a randomized double-blind, placebo-controlled trial.

Osteopathic treatments regulate the neurovegetative system through joint mobilizations and manipulations, and myofascial and craniosacral techniques. Despite the growing body of research, the precise impact of osteopathic medicine on the autonomic nervous system (ANS) is not yet fully elucidated. As to Kuchera's techniques, the stimulation of the sympathetic trunk and prevertebral ganglia contributed to harmonization of the sympathetic activity. However, potential relationships between the harmonization of the sympathetic nervous system (SNS) and the hypothalamic-pituitary-adrenal (HPA) axis largely remain uncertain and warrant further exploration. This study was designed to evaluate the effectiveness of the osteopathic sympathetic harmonization (OSH) on the SNS and the HPA axis in youth with major depressive disorder (MDD). The study included 39 youths aged 15-21 years and diagnosed with MDD. The participants were randomly assigned into either the OSH or the placebo group. Stimulation was performed on the sympathetic truncus and prevertebral ganglia in the OSH group. The stimulation of the placebo group was performed with a lighter touch and a shorter duration in similar areas. Each participant completed the Beck Depression Inventory (BDI) and the State and Trait Anxiety Inventory (SAI and TAI) before the application. Blood pressure (BP) and pulse measurements were made, and saliva samples were taken before, immediately after, and 20 min after application. The baseline BDI (p=0.617) and TAI (p=0.322) scores were similar in both groups. Although the SAI scores decreased in both groups postintervention, no statistically significant difference was found between the two groups. Subjects who received OSH had a decrease in α-amylase level (p=0.028) and an increase in cortisol level (p=0.009) 20 min after the procedure. Following OSH application in depressed youth, SNS activity may decrease, whereas HPA axis activity may increase. Future studies may examine the therapeutic efficacy of repeated OSH applications in depressed individuals.

The effect of modifier and a water-soluble fertilizer on two forages grown in saline-alkaline soil.

Saline-alkali soil significantly impairs crop growth. This research employs the impacts of the modifier and water-soluble fertilizer, as well as their interaction, on the root systems of alfalfa and leymus chinensis in saline-alkali soil. The results exhibit that the hydrochar source modifier effectively enhances the root growth of both forage species. There are certain improvements in the root growth indicators of both crops at a dosage of 20 g/kg. Root enzyme activity and rhizosphere soil enzyme activity are enhanced in alfalfa, showing significant improvements in the first planting compared to the second planting. The application of water-soluble fertilizers also promotes root growth and root dehydrogenase activity. The root dehydrogenase activity of alfalfa and leymus chinensis are enhanced 62.18% and 10.15% in first planting than that of blank, respectively. Additionally, the two-factor variance analysis revealed a correlation between rhizosphere soil enzyme activity and changes in root traits. Higher rhizosphere soil enzyme activity is observed in conjunction with better root growth. The combined application of a modifier and water-soluble fertilizer has demonstrated a significant interaction effect on various aspects of the first planting of alfalfa and leymus chinensis. Moreover, the combined application of the modifier and water-soluble fertilizer has yielded superior results when compared to the individual application of either the modifier or the water-soluble fertilizer alone. This combined approach has proven effective in improving saline-alkali soil conditions and promoting crop growth in such challenging environments.

Advances in Membrane Mimetic Systems for Manipulation and Analysis of Membrane Proteins: Detergents, Polymers, Lipids and Scaffolds.

Extracting membrane proteins from the hydrophobic environment of the biological membrane, in a physiologically relevant and stable state, suitable for downstream analysis remains a challenge. The traditional route to membrane protein extraction has been to use detergents and the last 15 years or so have seen a veritable explosion in the development of novel detergents with improved properties, making them more suitable for individual proteins and specific applications. There have also been significant advances in the development of encapsulation of membrane proteins in lipid based nanodiscs, either directly from the native membrane using polymers allowing effective capture of the protein and protein-associated membrane lipids, or via reconstitution of detergent extracted and purified protein into nanodiscs of defined lipid composition. All of these advances have been successfully applied to the study of membrane proteins via a range of techniques and there have been some spectacular membrane protein structures solved. In addition, the first detailed structural and biophysical analyses of membrane proteins retained within a biological membrane have been reported. Here we summarise and review the recent advances with respect to these new agents and systems for membrane protein extraction, reconstitution and analysis.

Exploring medical students’ perceptions of individual and group-based clinical reasoning with virtual patients: a qualitative study

BackgroundVirtual Patients are computer-based simulations used to teach and evaluate patient interviews, medical diagnoses, and treatment of medical conditions. It helps develop clinical reasoning skills, especially in undergraduate medical education. This study aimed to and investigate the medical students’ perceptions of individual and group-based clinical reasoning and decision-making processes by using Virtual Patients.MethodsThe study group comprised 24 third-year medical students. Body Interact® software was utilized as a VP tool. The students’ readiness and the courses’ learning goals were considered when choosing the scenarios. Semi-structured interview forms were employed for data collection. MAXQDA 2020 qualitative analysis software was used to analyze the data. The students’ written answers were analyzed using content analysis.ResultsThe participants perceived individual applications as beneficial when making clinical decisions with Virtual Patients, but they suggested that group-based applications used with the same cases immediately following individual applications were a more appropriate decision-making method. The results indicated that students learn to make decisions through trial and error, based on software scoring priorities, or using clinical reasoning protocols.ConclusionIn group-based reasoning, the discussion-conciliation technique is utilized. The students stated that the individual decision-making was advantageous because it provided students with the freedom to make choices and the opportunity for self-evaluation. On the other hand, they stated that the group based decision-making process activated their prior knowledge, assisted in understanding misconceptions, and promoted information retention. Medical educators need to determine the most appropriate method when using Virtual Patients, which can be structured as individual and/or group applications depending on the competency sought.

Transfer of Training and Awareness of Learning Style: The TOTALS Capstone Experience

Building on the research foundations of the traditional team-based business simulation environment, we present a new Transfer of Training and Awareness of Learning Style (TOTALS) Capstone model that draws from Organizational and Transfer of Training literature. This research-to-practice insight supports and describes how the Capstone simulation is sequenced with a team-based learning experience first and individual application second, thereby mirroring corporate training practices. This approach allows students to collaborate and exchange ideas, emulating workplace dynamics, and then demonstrate their understanding and skills during individual rounds. The model incorporates a reflection exercise to foster self-awareness of students’ learning styles and the best possible self, an important step toward empowering them to implement the skills and knowledge gained while working with a team. Lastly, we present results of an exploratory study that indicate that students of the Accommodator learning type are well-positioned to successfully transfer knowledge from training into individual success.

Biofilm removal from Difficult-to-Reach places via secondary cavitation within a constrained geometry mimicking a Periodontal/Peri-Implant pocket

Biofilm removal from the apical region of the periodontal or peri-implant pocket, which is very difficult to achieve with mechanical instruments, is a major unresolved issue in dentistry. Here, we propose the use of photoacoustically induced streaming and secondary cavitation to achieve superior cleaning efficacy in the apical region of the periodontal and peri-implant pocket. We have used a prefabricated narrow wedge system that mimics the consistency of periodontal and peri-implant pockets of both healthy and severely inflamed tissue. We studied the effect of single-pulse modality Er:YAG on Pseudomonas aeruginosa biofilm removal. We used different laser energies, fiber-tip positions, and laser treatment durations. The cleaning process was monitored in real-time with a high-speed camera after each individual laser pulse application. The obtained results suggest that biofilm cleaning efficacy in a difficult-to-reach place in healthy model tissue is directly related to the onset of secondary cavitation bubble formation, which correlates with a significant improvement of biofilm removal from the apical region of the periodontal or peri-implant pocket. In comparison to the healthy tissue model, the laser energy in inflamed tissue model had to be increased to obtain comparable biofilm cleaning efficacy. The advantage of photoacoustic cavitation compared to other methods is that laser-induced cavitation can trigger secondary cavitation at large distances from the point of laser application, which in principle allows biofilm removal at distant locations not reachable with a laser fiber tip or other mechanical instruments.

CD4+ T Cells From Individuals With Type 1 Diabetes Respond to a Novel Class of Deamidated Peptides Formed in Pancreatic Islets.

The β-cell plays a crucial role in the pathogenesis of type 1 diabetes, in part through the posttranslational modification of self-proteins by biochemical processes such as deamidation. These neoantigens are potential triggers for breaking immune tolerance. We report the detection by LC-MS/MS of 16 novel Gln and 27 novel Asn deamidations in 14 disease-related proteins within inflammatory cytokine-stressed human islets of Langerhans. T-cell clones responsive against one Gln and three Asn deamidated peptides could be isolated from peripheral blood of individuals with type 1 diabetes. Ex vivo HLA class II tetramer staining detected higher T-cell frequencies in individuals with the disease compared to control individuals. Furthermore, there was a positive correlation between the frequencies of T cells specific for deamidated peptides, insulin antibody levels at diagnosis, and duration of disease. These results highlight that stressed human islets are prone to enzymatic and biochemical deamidation and suggest that both Gln and Asn deamidated peptides can promote the activation and expansion of autoreactive CD4+ T cells. These findings add to the growing evidence that post-translational modifications undermine tolerance and may open the road for the development of new diagnostic and therapeutic applications for individuals living with type 1 diabetes.

WattScope: Non-intrusive Application-level Power Disaggregation in Datacenters

WattScope is a system for non-intrusively estimating the power consumption of individual applications using external measurements of a server's aggregate power usage and without requiring direct access to the server's operating system or applications. Our key insight is that, based on an analysis of production traces, the power characteristics of datacenter workloads, e.g., low variability, low magnitude, and high periodicity, are highly amenable to disaggregation of a server's total power consumption into application-specific values. WattScope adapts and extends a machine learning-based technique for disaggregating building power and applies it to server- and rack-level power measurements that are already available in datacenters. We evaluate WattScope's accuracy on a production workload and show that it yields high accuracy, e.g., often <∼10% normalized mean absolute error, and is thus a potentially useful tool for datacenters in externally monitoring application-level power usage.

The EPA Ecosystem Services Tool Selection Portal.

The dynamics of an environmental decision-making context can be complicated. The use of decision support tools can help better facilitate restoring and maintaining ecosystems that provide environmental benefits (ecosystem services) to people. Although an ecosystem services assessment tool is designed for specific purposes, having access to a comprehensive suite of tools offers the user additional insight and resources to help in decision making. A range of approaches exist to connect ecosystem services to a given decision context ranging from less to more complex: using the best professional judgment; applying examples from other efforts; testing individual tool applications; and using a systematic, decision-tree approach to navigate among relevant tools and frameworks. The U.S. Environmental Protection Agency developed a decision-tree approach for a user to navigate the question of how to choose among a suite of ecosystem services assessment tools for three decision contexts: (1) ecological risk assessments; (2) cleanup of contaminated sites; (3) and generic structured decision-making processes. This tool selection navigator was developed with/for the intended user, including developing crosswalks between tool functionality and the user's language for what they require in a tool. To navigate the tool, the user first chooses one of three decision contexts. Second, the user selects among the different phases of the decision process. Third, the user selects among a few ecosystem-services related tasks relevant to the decision context chosen to identify potential tools. The tool uses simple language to navigate the decision pathways and provides the user with a suite of potential ES resources and tools for their given decision context.