Oxygen Index Research Articles

Excellent flame-retardant polycarbonate composites with improved notched impact toughness via introducing imine-functionalized polysiloxane

Polycarbonate (PC) is known to suffer from damage over time, particularly in low-temperature settings besides its inherent flammability, where it can develop notches and lose its impact toughness. To address these issues, we synthesized schiff-based polysiloxane containing the benzene substituted with methoxy (referred to as PSOMe-X, X being the number of methoxy substitution on the benzene ring). Interestingly, by merely increasing the number of methoxy substitutions in PSOMe-X, the PC/PSOMe-X composites demonstrated significantly improved comprehensive performance. The PC/PSOMe-3 composite successfully passed the UL-94 (vertical burning test for Flammability of Plastic Materials for Parts in Devices and Appliances developed by Underwriters Laboratories) V-0 rating, and the limiting oxygen index (LOI) was increased to 29.9 %. This improvement was accompanied by a notable reduction in the peak heat release rate (PHRR) by 64 % and total smoke generation (TSP) by 18 %. Meanwhile the notched impact strength of the PC/PSOMe-3 composite was improved by 190 % at room temperature and 72 % at −25 °C. The mechanism for improved flame retardancy and impact tougheness for PC/PSOMe-X composites were unveiled.

Flame-retardant and tough poly(lactic acid) with well-preserved mechanical strength via reactive blending with bio-plasticizer and phosphorus derivative

With sustainable development, advanced poly(lactic acid) (PLA) with superior toughness and flame retardancy is highly demanded in various industries, but the current design strategies often fail to achieve such bioplastics. In this work, flame-retardant and tough PLA bioplastics with well-preserved thermal stability and mechanical strength and enhanced UV resistance and soil degradation are prepared by solvent-free, reactive blending of PLA, bio-based epoxidized soyabean oil (ESO) and 9,10-dihydro-9-oxa-10-phosphaphenanthrene 10-oxide (DOPO). With the introduction of 10.0 wt% ESO and 3.0 wt% DOPO, the resultant PLA/10E/3D bioplastic has a high tensile strength of 52.8 MPa, with 26.3 times and 67.5 % increases in elongation at break and impact strength compared to those of PLA due to the toughening effect of ESO and the rigid structure of DOPO. The superior toughness of PLA/10E/3D enables it to outperform previous flame-retardant PLA counterparts. PLA/10E/3D achieves a vertical burning (UL-94) V-0 classification and a limiting oxygen index (LOI) of 27.5 %, indicative of satisfactory flame retardancy. Compared with PLA, PLA/10E/3D maintains high thermal stability and shows significantly enhanced UV-protecting and soil degradation properties. Therefore, this work delivers a green and scalable reactive processing method to create flame-retardant, tough yet strong bioplastics with improved soil decomposition and UV resistance, which contributes to sustainable development.

The Effect of Expanded Vermiculite on the Fire Resistance of Waterborne Acrylic Coatings.

Due to their ability to prevent or slow the spread of fires, fire-retardant coatings are utilized as the main means of fire protection for steel structures, combining easy application and high economic efficiency. This study investigates the effects of the particle size and dosage of expanded vermiculite (EV) on the fire resistance and application performance of coatings. Ammonium polyphosphate, melamine, and pentaerythritol were used as intumescent fire-retardant systems, along with waterborne hydroxyl-modified acrylic resins as the film-forming substances. The properties of fire resistance coatings were tested via scanning electron microscope (SEM), X-ray diffractometry (XRD), thermogravimetric analysis (TGA), limiting oxygen index (LOI), and cone calorimetry. The excellent fire performance of the coatings with 3 wt.% 300-mesh EV was proven, exhibiting a relative expansion of 30.43 times. Moreover, the surface structure of the charcoal layer was dense. The total smoke production (TSP) and smoke concentration (TSR) were only 0.18 m2 and 0.25 m2/m2.

Plasma‐assisted incorporation of flame‐retardant chemicals for improved flame retardancy of polyester fabrics

AbstractThe polyester fabric was subjected to atmospheric plasma and impregnated with commercially available 3‐hydroxyphenyl phosphinyl‐propanoic acid (3HPP) as flame retarding agent by high‐temperature high pressure (HTHP) dyeing method. Various concentrations of 3HPP in water, up to 4% w/v, were applied using the HTHP method. It was observed that the plasma treatment not only enhanced wettability and wicking but also facilitated increased pickup of 3HPP onto the polyester. The treatment exhibited a noteworthy enhancement in the limiting oxygen index (LOI), rising from 20.8% for the untreated control fabric to 30% for the fabric treated with plasma and a 4% 3HPP solution. Additionally, the application of 3HPP without plasma treatment did not yield significant improvements in flame‐retardant (FR) properties. The combined treatment of plasma and 3HPP resulted in an LOI of 29% with a 2% 3HPP treatment, while at the same concentration without plasma treatment, the LOI value was 26.8%. The heightened LOI was primarily attributed to the presence of phosphorus, as confirmed by high‐performance liquid chromatography and energy‐dispersive X‐ray spectroscopy. Additionally, the wash durability assessment of plasma‐processed and 3HPP‐treated samples demonstrated sustained flame retardancy, with an LOI of approximately 28% even after undergoing 20 wash cycles. Vertical flammability and cone calorimetry also confirm improved FR properties after treatment. Remarkably, the mechanical properties and surface morphology of the fabric remained unaltered following both plasma and chemical treatments.Highlights Easy and cost‐effective technique for the downstream process for FR polyester fabric. FR agent during polymerization has the disadvantage of lower molecular weight. Potential for producing FR industrial polyester fabric. Post‐plasma treatment improves the washing fastness. The mechanical and comfort properties remain intact during the process.

COMPARISON OF OXIRIS AND CONVENTIONAL CONTINUOUS RENAL REPLACEMENT THERAPY IN MANAGING SEVERE ABDOMINAL INFECTIONS: IMPACT ON SEPTIC SHOCK MORTALITY.

Objective: The objective of this study is to assess and compare the efficacy of oXiris with conventional continuous renal replacement therapy (CRRT) in managing severe abdominal infections. Methods: A retrospective analysis encompassing cases from 2017 to 2023 was conducted at the Department of Critical Care Medicine within the First Affiliated Hospital of Fujian Medical University. Parameters including heart rate (HR), mean arterial pressure (MAP), oxygenation index, lactate (Lac), platelet count, neutrophil ratio, procalcitonin, C-reactive protein (CRP), interleukin 6 (IL-6), norepinephrine dosage, Acute Physiology and Chronic Health Evaluation II (APACHE II), and Sequential Organ Failure Assessment (SOFA) were recorded prior to treatment initiation, at 24 h, and 72 h after treatment for both the oXiris and conventional CRRT groups. In addition, the duration of respiratory support, CRRT treatment, length of stay in the intensive care unit (ICU), total hospitalization period, and mortality rates at 14 and 28 days for both groups were recorded. Results: 1) Within the conventional CRRT group, notable enhancement was observed solely in Lac levels at 24 h after treatment compared with pretreatment levels. In addition, at 72 h after treatment, improvements were evident in HR, Lac, CRP, and IL-6 levels. 2) Conversely, the oXiris group exhibited improvements in HR, MAP, Lac, oxygenation index, neutrophil ratio, and IL-6 at 24 h after treatment when compared with baseline values. In addition, reductions were observed in APACHE II and SOFA scores. At 72 h after treatment, all parameters demonstrated enhancement except for platelet count. 3) Analysis of the changes in the indexes (Δ) between the two groups at 24 h after treatment revealed variances in HR, MAP, Lac, norepinephrine dosage, CRP levels, IL-6 levels, APACHE II scores, and SOFA scores. 4) The Δ indexes at 72 h after treatment indicated more significant improvements following oXiris treatment for both groups, except for procalcitonin. 5) The 14-day mortality rate (24.4%) exhibited a significant reduction in the oXiris group when compared with the conventional group (43.6%). However, no significant difference was observed in the 28-day mortality rate between the two groups. 6) Subsequent to multifactorial logistic regression analysis, the results indicated that oXiris treatment correlated with a noteworthy decrease in the 14-day and 28-day mortality rates associated with severe abdominal infections, by 71.3% and 67.6%, respectively. Conclusion: oXiris demonstrates clear advantages over conventional CRRT in the management of severe abdominal infections. Notably, it reduces the fatality rates, thereby establishing itself as a promising and potent therapeutic option.

Novel phosphorous-containing epoxy thermosets with improved anti-flammability, smoke suppression, and dielectric properties

As one of the most commonly used thermosetting resins, the flammability of epoxy resins (EPs) has become a key factor limiting the expansion of their application range. Herein, a novel phosphorous-containing epoxy monomer (EDPPO) was synthesized using diallyl amine and diphenyl phosphoryl chloride as the starting materials. Subsequently, EDPPO was thermally cured with two diamine hardeners, 4, 4′-diaminodiphenyl sulfone (DDS) and 4,4′-dithiodianiline (DTDA). Additionally, commercial diglycidyl ether of bisphenol A (DGEBA)-type epoxy pre-polymers were cured with DDS and DTDA as comparative samples. The cured EDPPO-based thermosets showed excellent flame-retardant properties coupled with smoke suppression. Specifically, the limiting oxygen index (LOI) for the EDPPO/DDS (P content 6.4 wt.%) reached 32.0 %, and the UL-94 vertical burning test reached a V-0 rating. In addition, the PHRR, THR, and TSP values of EDPPO/DDS were 61.6 %, 49.1 %, and 58.5 % lower than those of DGEBA/DDS, respectively. The flame retardant mechanism analysis indicated that the excellent flame retardancy for cured EDPPO-based thermosets was attributed to the combined modes of action in condensed (promoting the charring capacity) and gaseous phases (quenching the active radicals). More importantly, EDPPO/DDS and EDPPO/DTDA exhibited lower dielectric constant and dielectric loss than DGEBA/DDS and DGEBA/DTDA. This work provided novel phosphorous-containing epoxy thermosets with improved anti-flammability, smoke suppression, and dielectric properties.

Tannic acid coated ammonium polyphosphate: For flame retardant and UV resistant of polypropylene

Polypropylene (PP) has the advantages of excellent mechanical properties and easy molding, but its shortcomings such as high flammability and poor ultraviolet (UV) resistance cannot be ignored. In this paper, APP was used as the core, 1, 10-diamino-decane (DA) was used as a "bridge" to connect TA to the surface of APP, obtaining TAPP through oxidation self-polymerization. The addition of TAPP greatly improved the flame retardancy and UV resistance of PP matrix. The limiting oxygen index of the PP/22.5 %TAPP sample was increased to 31.0 %, and it was able to pass the UL-94 V-0 rating without droplet produced. Compared with PP samples, the peak heat release rate and peak smoke release rate of PP/22.5 %TAPP sample were reduced by 65.0 % and 44.7 %, respectively. In addition, the tensile strength and impact strength of PP/22.5 %TAPP samples decreased by only 2.7 % and 15.0 % after 60 h UV irradiation. The results showed that the addition of TAPP effectively improved the flame retardancy and UV aging resistance of PP. This study provides a feasible method for the preparation of anti-UV aging and flame-retardant PP composites.

Self-crosslinking phosphorus-containing durable flame retardants for cotton fabrics

The phosphorus-containing flame retardant that can enter the interior of cotton fiber and has self-crosslinking ability was designed and synthesized. The flame retardant contains two components, 2-(1-(dimethoxy phosphoryl)-2,5, 8-Triazectridecyl) phosphonate starch (PTPS) and 4-(hydroxymethyl)-10-((3-((5-(hydroxymethyl)-10-((3-((tris(hydroxymethyl)phosphonio)methyl)ureido)methyl)-2,6,8,12,14,18-hexaaza-4,10,16-Triphosphanonadecane (BPTP). The structure of PTPS and BPTP were detected by NMR and FTIR, and the results showed that the synthesis of PTPS and BPTP was successful. During the treatment, cellulose was first endowed with -NH groups. Then PTPS molecule and BPTP molecule were grafted onto cellulose through the reaction of P-CH2OH groups and -NH groups. After 50 laundering cycles (NFPA2112–2012 standard), the limiting oxygen indexes (LOIs) of the fabrics treated with 35 wt% CFN-PB and 30 wt% CFN-PB were 28.80% and 27.30%, respectively, and passed the vertical flame test (VFT). Compared with the raw cotton, the peak heat release rate (PHRR), the total heat rate (THR) and the flame growth rate (FGR) of the CNF-PB treatment fabric were reduced by 62.90 %, 29.43 % and 62.91 % respectively. These indicate that the flame retardant PB could be firmly fixed on the fibers and show good flame retardancy durability. In the VFT, and cone calorimetry test, the CFN-PB treated fabric showed the condensed phase flame retardant mechanism.

Synergistic Effects of Titanium-Based MOFs MIL-125 with Intumescent Flame Retardants in ABS Polymer Composites on Flame Retardancy Study

The intumescent flame retardant (IFR) technique is an alternative to halogen-based flame retardants for reducing fire hazards in polymers. However, IFR has drawbacks like unsatisfactory flame-retardant efficiency and high loading requirements. In this study, MIL-125 (Ti-based metal–organic framework) is added to ABS/IFR composites to improve flame retardancy and reduce smoke emissions. Thermogravimetric analysis (TGA) results indicate that combining ammonium polyphosphate (APP) and expandable graphite (EG) increases charred residue and slows mass loss compared with the original ABS resin. The ABS/IFR/MIL-125 system stabilizes the char layer, serving as a protective shield against combustible gases during combustion. Additionally, MIL-125 enhances performance in microscale combustion calorimetry (MCC) flammability testing. In fire tests (UL-94, limiting oxygen index (LOI), and cone calorimeter), the ABS/IFR/MIL-125 system achieves a UL-94 V0 rating and the highest LOI value of 31.5% ± 0.1%. Peak heat lease rate (PHRR) values in the cone calorimeter are reduced by 72% with 20 wt.% of additives, and smoke production decreases by 53% compared with neat ABS. These results demonstrate the efficient synergistic effects of MIL-125 and IFR additives in improving the formation and stability of the intumescent char layer, thereby protecting ABS from intense burning.

Controllable Self-Assembly of Carbon Nanotubes on Ammonium Polyphosphate as a Game-Changer for Flame Retardancy and Thermal Conductivity in Epoxy Resin.

The optimization of flame retardancy and thermal conductivity in epoxy resin (EP), utilized in critical applications such as mechanical components and electronics packaging, is a significant challenge. This study introduces a novel, ultrasound-assisted self-assembly technique to create a dual-functional filler consisting of carbon nanotubes and ammonium polyphosphate (CNTs@APP). This method, leveraging dynamic ligand interactions and strategic solvent selection, allows for precise control over the assembly and distribution of CNTs on APP surfaces, distinguishing it from conventional blending approaches. The integration of 7.5wt.% CNTs@APP10 into EP nanocomposites results in substantial improvements in flame retardancy, as evidenced by a limiting oxygen index (LOI) value of 31.8% and achievement of the UL-94V-0 rating. Additionally, critical fire hazard indicators, including total heat release (THR), total smoke release (TSR), and the peak intensity of CO yield (PCOY), are significantly reduced by 45.9% to 77.5%. This method also leads to a remarkable 3.6-fold increase in char yield, demonstrating its game-changing potential over traditional blending techniques. Moreover, despite minimal CNTs addition, thermal conductivity is notably enhanced, showing a 53% increase. This study introduces a novel approach in the development of multifunctional EP nanocomposites, offering potential for wide range of applications.

Modified Epoxy Resin on the Burning Behavior and Mechanical Properties of Aramid Fiber Composite.

Aramid fiber/epoxy resin (AF/EP) composite has been heavily used as an impact protection material due to its excellent mechanical properties and lightweight merits. Meanwhile, it is also necessary to concern the flammability of matrix resin and the wick effect of aramid fiber, which would constitute a fire risk in harsh environments. In this work, a multifunctional flame-retardant modifier (EAD) was incorporated into the AF/EP system to improve the flame retardation. The addition of 5 wt% EAD made the AF/EP composite exhibit a high limiting oxygen index (LOI) value of 37.5%, self-extinguishment, as well as decreased total heat release and total smoke release. The results from thermogravimetric analysis (TGA) and dynamic mechanical analysis (DMA) demonstrated that the treated composites maintained good thermal stability. Due to the combined action of covalent and noncovalent bonds in the matrix-rich region, the interfacial bonding improved, which endowed AF/EP composite with strengthening and toughening effects. Compared with the control sample AF/EP, the tensile strength and ballistic parameter (V50) of the sample with 5 wt% EAD increased by 17% and 10%, accompanied with ductile failure mode. Furthermore, the flame-retardant mechanism was obtained by analyzing the actions in condensed and gaseous phases. Thanks to good compatibility and interfacial adhesion, the incorporation of EAD solved the inconsistent issue between flame retardancy and mechanical properties, which further expanded the application of AF/EP composite in the protection field.

Enhancing epoxy composite materials through lime‐treated sugarcane bagasse and glass fiber reinforcement: Morphological, mechanical, and flame‐retardant insights

AbstractThis study investigates the utilization of sugarcane bagasse and glass fiber to reinforce epoxy composites, enhancing both mechanical and fire resistance properties. Initially, bagasse is collected, sun‐dried, and finely ground before being treated with lime water at concentrations of 3%, 5%, and 7% by weight. The treated bagasse is then mixed with epoxy resin and a hardening agent, followed by a curing process. For samples incorporating glass fibers, the fibers are manually integrated and cured similarly. The methodology involved detailed preparation of the bagasse, its treatment, and subsequent integration with epoxy resin. The mixture was processed under controlled conditions to ensure uniformity and quality. Mechanical properties such as tensile strength, flexural strength, compressive strength, and impact resistance were measured. Thermogravimetric analysis (TGA) was employed to assess thermal stability, while fire resistance was evaluated using the limiting oxygen index (LOI) and the 94‐V test method. Results demonstrated significant improvements in both mechanical and thermal properties with the addition of bagasse and glass fibers. The optimal treatment was identified at a 5% lime water concentration, yielding a tensile strength of 295.08 MPa, flexural strength of 371.24 MPa, compressive strength of 255.39 MPa, and Izod impact strength of 157.04 kJ/m2. TGA results showed the highest thermal stability at 5% concentration, with decomposition temperatures peaking at 402.52 °C. Fire resistance was markedly enhanced, achieving an LOI of 29.8% and meeting V2 level standards according to the 94‐V test method. In conclusion, treating sugarcane bagasse with a 5% lime water solution significantly enhances the mechanical and fire‐resistant properties of epoxy composites. The combination of sugarcane bagasse and glass fiber creates a robust material with high thermal stability and fire resistance, making it a viable option for applications requiring these enhanced properties.

Synthesis of biobased Phosphorus-Nitrogen-Silicon ceramizable flame retardant and its flame retardancy effects on EPS

The rising interest in eco-friendly flame retardants marks a notable trend in the industry. However, the challenge remains that most flame retardants, while achieving high flame retardant properties, struggle to balance environmental sustainability and resource utilization. This work delves into the green synthesis and mechanism of action of ceramizable flame retardants. Using phytic acid (PA) and urea (U) as raw materials, ionic complexation assembly in water, employing polydopamine (PDA) as an adhesive, to develop an environmentally friendly, bio-based synergistic flame retardant (PAU) is conducted. Building upon this groundwork, the addition of the ceramic filler kaolin (KL) and the fluxing agent sodium carbonate (Na2CO3) physically modifies the PAU, resulting in a novel eco-friendly, bio-based, ceramifiable flame retardant (PAUK). Employing the prepared PAUK through an effective surface coating technique, a lightweight and scratch-resistant flame-retardant expanded polystyrene insulation board (EPS-PAUK) is created. The best EPS-PAUK composite in our study exhibits an oxygen index of 52.5, achieves a V-0 UL-94 rating, and features excellent smoke suppression and compression strength up to 67.8 kPa, while nearly maintaining the lightweight characteristics of the EPS insulation boards. This bio-based, ceramifiable flame retardant system offers a new approach for producing lightweight, highly efficient flame-retardant and high-performance polymers.

Vanillin-based flame retardant enables polylactic acid high-efficiency fireproof, anti-UV and oxygen barrier for food packaging

Polylactic acid (PLA) is widely known for its biocompatibility, biodegradability, and high transparency. However, it still has varied limitations such as flammability, UV sensitivity, and poor oxygen barrier properties. To address these issues, a bio-based compound, hexasubstituted cyclotriphosphazene (HVP), was synthesized by using vanillin and hexachlorocyclotriphosphazene to enhance the overall performance of PLA. The resulting PLA/HVP composites demonstrated improved mechanical strength and UV resistance. Specifically, PLA/3HVP, with a 3 wt% HVP loading, achieved a UL-94 V-0 rating and a high limiting oxygen index of 26.5 %. Cone calorimeter tests revealed that PLA/3HVP possessed a significantly longer ignition time and a lower peak heat release rate compared to pure PLA. These burning testing results indicated the enhanced fire resistance. Additionally, the oxygen transmission rate of PLA/3HVP was reduced by 81.1 % compared to pure PLA. When used as food packaging, the weight loss of mangoes covered with PLA/3HVP film was 2.2 % after 7 days, compared to 2.5 % with pure PLA film, highlighting its potential for food preservation applications.

Enhancing the flame retardancy of polycarbonate through the synergistic effect of 1,3‐Benzenedisulfonate acid dipotassium salt and phenyl polysiloxanes

AbstractAs the application of polycarbonate (PC) in various fields continues to expand, the requirements for its flame retardancy are becoming increasingly stringent. To enhance the flame retardancy of PC, employing multi‐element synergistic effects and developing novel flame retardants are considered as vital strategies. This work introduces a blend of 1,3‐Benzenedisulfonic acid dipotassium salt (KSP) and three types of phenyl polysiloxanes, namely Octaphenylcyclotetrasiloxane (P4), Octaphenylsilsesquioxane (OPS), and ladder‐like Polyphenylsesquioxane (L‐PPSQ), into PC to create composites. The thermal stability and combustion properties of these composites were characterized using thermogravimetric analysis (TGA), limiting oxygen index (LOI), UL‐94 vertical burning, and cone calorimetry tests. Composites with phenyl polysiloxanes achieved a UL‐94 V‐0 flame retardant rating for 1.6 mm thickness sample and reduced the peak heat release rate by 30%–45%. PC composites with 3% OPS and 0.03% KSP achieved optimal performance, howing a LOI of 34.5%, a 45.4% reduction in peak heat release, and a 40.5% reduction in total smoke release. The flame‐retardant mechanism was analyzed using scanning electron microscopy (SEM), energy‐dispersive X‐ray spectroscopy (EDX), Fourier transform infrared spectroscopy (FTIR), and pyrolysis‐gas chromatography‐mass spectrometry (Py‐GC‐MS).

A phosphorus/fluorine‐containing block copolymer endows epoxy with multifunctionality

AbstractIn order to achieve flame retardant, hydrophobic, and toughened epoxy resins, phosphorus/fluorine‐containing block copolymer (FBCP) was synthesized by reversible addition‐fragmentation chain transfer polymerization, and then the as‐synthesized PMADOPO‐b‐PHFBA block copolymer was used as additive to modify the epoxy resin, accompanying with a random copolymer (FRCP) serving as control group. It showed that due to the regular arrangement of molecular chains, FBPC formed a fibrous‐like structure at the fracture interface of epoxy/PMADOPO‐b‐PHFBA (EP/FBCP) samples, effectively enhancing the toughness of epoxy composite materials. The fracture energy of EP90/FBCP‐10 was higher than that of EP90/FRCP‐10 and was about twice than that of pure EP. The addition of 3 wt% FBCP could enhance the limited oxygen index (LOI) of EP97/FBCP‐3 to 33.2% and reached a V‐1 UL‐94 rating. As the addition of FBCP increased, the LOI gradually increased. When the addition of FBCP was 10%, the LOI and UL‐94 of EP90/FBCP‐10 was 38.2% and V‐0 grade, respectively. Meanwhile, the presence of fluorine element effectively reduced the surface energy of the composite EP material. Compared with pure EP, the water contact angle of EP90/FBCP‐10 was about 101° with an increasing of 20.8%. Furthermore, the flame‐retardant mechanism of EP/FBCP epoxy composites was discussed.

Ultrarobust, Self-Healing Poly(urethane-urea) Elastomer with Superior Tensile Strength and Intrinsic Flame Retardancy Enabled by Coordination Cross-Linking.

Poly(urethane-urea) elastomers (PUUEs) have gained significant attention recently due to their growing demand in electronic skin, wearable electronic devices, and aerospace applications. The practical implementation of these elastomers necessitates many exceptional properties to ensure robust and safe utilization. However, achieving an optimal balance between high mechanical strength, good self-healing at moderate temperatures, and efficient flame retardancy for poly(urethane-urea) elastomers remains a formidable challenge. In this study, we incorporated metal coordination bonds and flame-retarding phosphinate groups into the design of poly(urethane-urea) simultaneously, resulting in a high-strength, self-healing, and flame-retardant elastomer, termed PNPU-2%Zn. Additional supramolecular cross-links and plasticizing effects of phosphinate-endowed PUUEs with relatively remarkable tensile strength (20.9 MPa), high elastic modulus (10.8 MPa), and exceptional self-healing efficiency (above 97%). Besides, PNPU-2%Zn possessed self-extinguishing characteristics with a limiting oxygen index (LOI) of 26.5%. Such an elastomer with superior properties can resist both mechanical fracture and fire hazards, providing insights into the development of robust and high-performance components for applications in wearable electronic devices.

Relationships of Jugular Bulb Parameters with Cerebral Perfusion and Metabolism After Resuscitation from Cardiac Arrest: A Post-Hoc Analysis of Experimental Studies Using a Minipig Model.

Cerebral blood flow (CBF) decreases in the first few hours or days following resuscitation from cardiac arrest, increasing the risk of secondary cerebral injury. Using data from experimental studies performed in minipigs, we investigated the relationships of parameters derived from arterial and jugular bulb blood gas analyses and lactate levels (jugular bulb parameters), which have been used as indicators of cerebral perfusion and metabolism, with CBF and the cerebral lactate to creatine ratio measured with dynamic susceptibility contrast magnetic resonance imaging and proton magnetic resonance spectroscopy, respectively. We retrospectively analyzed 36 sets of the following data obtained during the initial hours following resuscitation from cardiac arrest: percent of measured CBF relative to that at the prearrest baseline (%CBF), cerebral lactate to creatine ratio, and jugular bulb parameters, including jugular bulb oxygen saturation, jugular bulb lactate, arterial-jugular bulb oxygen content difference, cerebral extraction of oxygen, jugular bulb-arterial lactate content difference, lactate oxygen index, estimated respiratory quotient, and arterial-jugular bulb hydrogen ion content difference. Linear mixed-effects models were constructed to examine the effects of each jugular bulb parameter on the %CBF and cerebral lactate to creatine ratio. The arterial-jugular bulb oxygen content difference (P = 0.047) and cerebral extraction of oxygen (P = 0.030) had a significant linear relationship with %CBF, but they explained only 12.0% (95% confidence interval [CI] 0.002-0.371) and 14.2% (95% CI 0.005-0.396) of the total %CBF variance, respectively. The arterial-jugular bulb hydrogen ion content difference had a significant linear relationship with cerebral lactate to creatine ratio (P = 0.037) but explained only 13.8% (95% CI 0.003-0.412) of the total variance in the cerebral lactate to creatine ratio. None of the other jugular bulb parameters were related to the %CBF or cerebral lactate to creatine ratio. In conclusion, none of the jugular bulb parameters appeared to provide sufficient information on cerebral perfusion and metabolism in this setting.

Fabrication of CoFe‐layered double hydroxide for flame retardant and smoke suppression of silicone rubber foam

AbstractIn order to improve the flame retardancy and smoke suppression of silicone rubber foam (SRF), the CoFe‐LDH was fabricated by coprecipitation method and used as flame‐retardant ingredient in SRF. The influence of CoFe‐LDH on the flame retardancy, combustion behavior, and thermal stability of SRF was investigated. The results demonstrate that SRF containing only 1.0 phr CoFe‐LDH can pass V‐0 rating in the vertical combustion test, with a limiting oxygen index of 28.6%. The total heat release and total smoke production are 22.2% and 61.1% lower than that of SRF, respectively. Moreover, CoFe‐LDH can improve the thermal stability of SRF in the high temperature range, and the char residue at 900°C of SRF/LDH composite is obviously higher than that of pure SRF. In addition, to further understand the flame‐retardant mechanism of CoFe‐LDH, the micromorphology of the char residue and the gaseous products during heating for SRF and SRF/LDH composite were analyzed. The results indicate that CoFe‐LDH exhibits excellent flame‐retardant effects in both condensed and gaseous phases for its functions of catalysis, carbonization, and nonflammable gas release. This study provides a more efficient and convenient strategy for the flame retardant and smoke suppression research of SRF.

Flame retarded lignin-based epoxy resin with excellent antibacterial and anti-corrosion properties modified by coordinated phospho-nitrogen flame retardant

In this paper, epoxidized lignin (HL) and sebacic acid (HSA) were used as the hard and soft segments, respectively, and a kind of reactive coordinated phosphorous-nitrogen flame retardants (DTZ) was designed and synthesized via Zn2+ coordination to fabricate a multifunctional non-bisphenol A lignin based epoxy (EP) composite. The swelling behavior and morphological analysis demonstrated that the crosslinking density of EP increased significantly after adding HL and DTZ. The existence of coordination sacrificial bond of DTZ dissipated more energy when it was subjected to external forces, thereby making 80HSA/14HL/6DTZ maintained a high tensile strength (10.65 MPa) while having little damage to the elongation at break (30.74 %). The limiting oxygen index (LOI) of 80HSA/14HL/6DTZ was significantly higher than that of 100HSA (22.3 %), reaching 36.6 %, and the vertical combustion test (UL-94) reached V-0 level. The morphology of carbon layer and residual carbon analysis showed that HL and DTZ had synergistic effect, and the flame retardancy mechanism of gas phase and condensed phase existed in the combustion process. Simultaneously, the addition of HL and DTZ also endowed the EP composite with excellent corrosion resistance and antibacterial properties.