Independent Component Analysis Method Research Articles

A Comprehensive and Broad Approach to Resting-State Functional Connectivity in Adult Patients with Mild Traumatic Brain Injury.

Several recent works using resting-state fMRI suggest possible alterations of resting-state functional connectivity after mild traumatic brain injury. However, the literature is plagued by various analysis approaches and small study cohorts, resulting in an inconsistent array of reported findings. In this study, we aimed to investigate differences in whole-brain resting-state functional connectivity between adult patients with mild traumatic brain injury within 1 month of injury and healthy control subjects using several comprehensive resting-state functional connectivity measurement methods and analyses. A total of 123 subjects (72 patients with mild traumatic brain injury and 51 healthy controls) were included. A standard fMRI preprocessing pipeline was used. ROI/seed-based analyses were conducted using 4 standard brain parcellation methods, and the independent component analysis method was applied to measure resting-state functional connectivity. The fractional amplitude of low-frequency fluctuations was also measured. Group comparisons were performed on all measurements with appropriate whole-brain multilevel statistical analysis and correction. There were no significant differences in age, sex, education, and hand preference between groups as well as no significant correlation between all measurements and these potential confounders. We found that each resting-state functional connectivity measurement revealed various regions or connections that were different between groups. However, after we corrected for multiple comparisons, the results showed no statistically significant differences between groups in terms of resting-state functional connectivity across methods and analyses. Although previous studies point to multiple regions and networks as possible mild traumatic brain injury biomarkers, this study shows that the effect of mild injury on brain resting-state functional connectivity has not survived after rigorous statistical correction. A further study using subject-level connectivity analyses may be necessary due to both subtle and variable effects of mild traumatic brain injury on brain functional connectivity across individuals.

Affinity of structural white matter tracts between infant and adult pig

BackgroundThe piglet brain has been increasingly used as an excellent surrogate for investigation of pediatric neurodevelopment, nutrition, and traumatic brain injuries. This study intends to establish a piglet brain’s structural connectivity model and compare it with the adult pig, enhancing its application for structurally guided functional analysis. MethodsIn this study, diffusion-weighted (DW)-MRI data from piglets (n=11, 3-week-old) was used to establish piglet model and compare with adult pigs. We employed a data-driven independent component analysis (ICA) method to derive piglet-specific tracts. Pearson correlations and Kullback-Leibler (KL) divergences was employed to identify common tracts and unique tracts for piglet. Common tracts were then used in a blueprint connectome study to highlight differences in regions of interest (ROI). ResultsThe data-driven approach applied to piglet brains revealed 17 common tracts, showing high similarity with adult pigs' white matter (WM) tracts, and identified 3 tracts unique to piglets and 10 negative marker tracts. Additionally, the study highlighted notable differences in 3 ROIs associated with blueprint connectome. Comparing with existing methodsThis study marks a significant shift from surface-based to voxel-based methodologies in analyzing pig brain structural connectivity and generating connectome blueprints. Additionally, it sheds light on the use of the piglet model for developmental studies, offering new perspectives in this area. ConclusionThis study established a piglet brain tract model and conducts a comparative analysis of adult pig’s and piglet’s structural connectivity. These findings underscore the potential use of the piglet brain model in employing piglet model for developmental studies.

A concurrent fault diagnosis method for electric isolation valves in nuclear power plants based on rule-based reasoning and data-driven methods

In order to improve the fault diagnosis ability of electric isolation valves in nuclear power plants, especially for the diagnosis of concurrent faults, a novel concurrent fault diagnosis method based on rule reasoning and data-driven methods is proposed in this study. The concurrent fault diagnosis method is divided into two layers: the rule-based reasoning layer and data-driven layer. In order to realize the diagnosis of most concurrent faults, the rule-based reasoning layer is established by a rule inference model according to the failure mode and effects analysis (FMEA) of the electric isolation valve. In order to diagnose concurrent faults with mutual interference of fault features that cannot be diagnosed by rule-based reasoning layer, the data-driven layer is established by variational mode decomposition (VMD) and fast independent component analysis (Fast-ICA) method to separate concurrent fault signals and gate recurrent unit (GRU) method to identify fault patterns. After testing on the electric valve test bench and simulation data, multiple concurrent faults of the electric isolation valve are diagnosed accurately by the proposed concurrent fault diagnosis framework, including complex concurrent faults such as internal leakage and external leakage, and the framework can also work in a single fault diagnosis scenario without changing models. Compared with the concurrent fault diagnosis based on multi-label support vector machine, the accuracy of concurrent fault diagnosis is improved by about 25.3%. The research can provide a new idea for the concurrent fault diagnosis of electric isolation valves and other equipment.

The relationship between GRACE gravity and the seismic b-value: a case study of the Northern Chile Triple Junction (25° S–40° S)

SUMMARY The northern Chile Triple Junction (CTJ) is characterized by the ongoing subduction of the Nazca plate beneath the South American plate. The geological structures within the subduction zone undergo complex changes, resulting in significant tectonic activities and intense seismicity along the western margin of South America. Based on the Gravity Recovery and Climate Experiment (GRACE) data and earthquake catalogues, this study selects the northern CTJ area (25° S–40° S, 75° W–65° W) as the research object, adopts the mathematical methods of independent component analysis (ICA) and principal component analysis (PCA) to separate the earthquake-related signals within the GRACE data, and fits the changes of seismic b-values through the frequency–magnitude relationship. The characteristics of gravity changes before and after seismic events, the seismic activity parameter b-values, and the relationship between the gravity signals and b-values are discussed. The results show that mathematical methods can effectively extract seismic-related gravity components from the GRACE data. ICA, compared to PCA, provides better results in capturing the temporal variations associated with b-value time-series, which exhibit good consistency in long-term trend changes. The average change of b-values in the study area is 0.66 ± 0.003, fluctuating over time. Generally, prior to larger seismic events, b-values tend to decrease. Along the western margin of South America, b-values are low; this aligns with the active tectonic activities between subducting plates. Additionally, a certain correlation between b-values and gravity changes is observed, but due to the influence of tectonic activities, the correspondence between b-values and gravity anomalies may not be consistent across different areas. The b-value is highly consistent with the strain rate model. Low b-values correspond to high strain rates along the western edge of South America, which is in line with the tectonic characteristics of frequent seismic activity in this area. A gradual concentration of gravity anomalies before major earthquakes is observed, accompanied by the gradual accumulation of smaller seismic events. Meanwhile, several months before the two major earthquakes, the spatial distribution of gravity appears to be similar to the coseismic signals, but the nature of its generation remains to be explored. These methods and results not only add to the applications of GRACE in seismic studies but also raise questions for further exploration.

SMART (Splitting-Merging Assisted Reliable) Independent Component Analysis for Extracting Accurate Brain Functional Networks.

Functional networks (FNs) hold significant promise in understanding brain function. Independent component analysis (ICA) has been applied in estimating FNs from functional magnetic resonance imaging (fMRI). However, determining an optimal model order for ICA remains challenging, leading to criticism about the reliability of FN estimation. Here, we propose a SMART (splitting-merging assisted reliable) ICA method that automatically extracts reliable FNs by clustering independent components (ICs) obtained from multi-model-order ICA using a simplified graph while providing linkages among FNs deduced from different-model orders. We extend SMART ICA to multi-subject fMRI analysis, validating its effectiveness using simulated and real fMRI data. Based on simulated data, the method accurately estimates both group-common and group-unique components and demonstrates robustness to parameters. Using two age-matched cohorts of resting fMRI data comprising 1,950 healthy subjects, the resulting reliable group-level FNs are greatly similar between the two cohorts, and interestingly the subject-specific FNs show progressive changes while age increases. Furthermore, both small-scale and large-scale brain FN templates are provided as benchmarks for future studies. Taken together, SMART ICA can automatically obtain reliable FNs in analyzing multi-subject fMRI data, while also providing linkages between different FNs.

Prediction model of land surface settlement deformation based on improved LSTM method: CEEMDAN-ICA-AM-LSTM (CIAL) prediction model.

The uneven settlement of the surrounding ground surface caused by subway construction is not only complicated but also liable to cause casualties and property damage, so a timely understanding of the ground settlement deformation in the subway excavation and its prediction in real time is of practical significance. Due to the complex nonlinear relationship between subway settlement deformation and numerous influencing factors, as well as the existence of a time lag effect and the influence of various factors in the process, the prediction performance and accuracy of traditional prediction methods can no longer meet industry demands. Therefore, this paper proposes a surface settlement deformation prediction model by combining noise reduction and attention mechanism (AM) with the long short-term memory (LSTM). The complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) and independent component analysis (ICA) methods are used to denoise the input original data and then combined with AM and LSTM for prediction to obtain the CEEMDAN-ICA-AM-LSTM (CIAL) prediction model. Taking the settlement monitoring data of the construction site of Urumqi Rail Transit Line 1 as an example for analysis reveals that the model in this paper has better effectiveness and applicability in the prediction of surface settlement deformation than multiple prediction models. The RMSE, MAE, and MAPE values of the CIAL model are 0.041, 0.033 and 0.384%; R2 is the largest; the prediction effect is the best; the prediction accuracy is the highest; and its reliability is good. The new method is effective for monitoring the safety of surface settlement deformation.

Rolling bearing compound fault diagnosis based on spatiotemporal intrinsic mode decomposition

Aiming at the vibration signal characteristics of multi-channel rolling bearing complex faults containing various shock components, a rolling bearing complex fault diagnosis model based on spatiotemporal intrinsic mode decomposition (STIMD) method and fast spectral kurtosis method was proposed. The spatiotemporal intrinsic mode decomposition method combines the signal atomic decomposition method with the idea of signal blind source separation. Through the fast independent component analysis and the nonlinear matching pursuit method of the established overcomplete dictionary base, various fault mode components are separated. The initial phase function selected based on the high kurtosis fault frequency band obtained by the fast spectral kurtosis method can better fit the bearing fault frequency domain characteristics, so that the spatiotemporal intrinsic mode decomposition method can more accurately separate various impact components in the vibration signal. The simulation model of bearing compound fault was established and the data collected from fault diagnosis experiment platform were used to verify that the STIMD method was effective in solving the problem of rolling bearing compound fault diagnosis. By analyzing the kurtosis changes under different signal noise ratio (SNR) conditions and comparing the simulation results with the fast independent component analysis method, it shows that the kurtosis index decomposed by the proposed method is more able to prove the existence of faults under the condition of low SNR, that is, the impact is completely covered by noise. Therefore, a spatiotemporal intrinsic mode decomposition method with fast spectral kurtosis optimization can solve the problem of blind source separation in the field of composite faults of multi-channel rolling bearings and realize composite fault diagnosis.

The parameter identification of metro rail corrugation based on effective signal extraction and inertial reference method

Rail corrugation is a severe track damage and failure problem in metro lines. So, the accurate assessment of rail corrugation is significant for the safety and comfort of vehicles. It is an efficient means to detect rail corrugation through the acceleration signal. However, the acceleration signal contains the mixed signal caused by vehicle component noise and wheel polygonal wear, resulting in poor rail corrugation detection accuracy. Therefore, a new method is presented to extract the effective signal components and accurately identify the rail corrugation. Firstly, the Cubic mapping, modified sine algorithm, and Lévy flight are introduced into the dung beetle optimizer algorithm. A new improved dung beetle optimizer (IDBO) algorithm is presented to optimize the hyperparameters of the VMD algorithm, which can increase the signal decomposition performance of the VMD. Secondly, the fast independent component analysis method separates the independent components (ICs) from the VMD modes and original acceleration signal. Based on the selection criteria of ICs, the dominant signal components related to rail corrugation are determined. The rail corrugation amplitude can be obtained through the inertial reference method. The experimental results demonstrate that the presented method has better rail corrugation recognition accuracy, the root mean square error is smaller than the comparison method, and the corrugation wavelength of the straight track is larger than the curve track.

Research on a Resource Modeling and Power Prediction Method Based on Virtual Aggregation

Distributed resources at a grid’s end cannot upload operational power data to local centers due to data transmission and privacy issues. This leaves the centers with incomplete information, thus impacting decision making. This paper presents a virtual aggregation-based model for such scenarios. We define four virtual aggregate types based on resource response characteristics. Using characteristic coefficients, we identify these aggregates’ categories and proportions from bus power. To address blind source separation in single-channel power signals, we apply the Ensemble Empirical Mode Decomposition-Fast Independent Component Analysis (EEMD-FastICA) method. This helps extract and analyze bus power, thereby deriving power curves for different aggregates. Moreover, we use a graph convolutional network to explore how factors like date, time, weather, and pricing intertwine with aggregate power. We develop a predictive model with an advanced SpatioTemporal Graph Convolutional Network (STGCN), thus facilitating proactive power forecasting for virtual aggregates. Case studies show our method’s efficacy in extracting power curves under limited information, with the STGCN ensuring accurate, forward-looking predictions.

CW_ICA: an efficient dimensionality determination method for independent component analysis.

Independent component analysis (ICA) is a widely used blind source separation method for signal pre-processing. The determination of the number of independent components (ICs) is crucial for achieving optimal performance, as an incorrect choice can result in either under-decomposition or over-decomposition. In this study, we propose a robust method to automatically determine the optimal number of ICs, named the column-wise independent component analysis (CW_ICA). CW_ICA divides the mixed signals into two blocks and applies ICA separately to each block. A quantitative measure, derived from the rank-based correlation matrix computed from the ICs of the two blocks, is utilized to determine the optimal number of ICs. The proposed method is validated and compared with the existing determination methods using simulation and scalp EEG data. The results demonstrate that CW_ICA is a reliable and robust approach for determining the optimal number of ICs. It offers computational efficiency and can be seamlessly integrated with different ICA methods.

Quantifying active brain areas at spatial hearing process using Electroencephalography (EEG) source localization approach

The human ability for spatial hearing encourages the development of spatial audio technology to support many human activities. Spatial audio mimics the real-life sound and provides a more immersive hearing experience as if the listener were present in the environment where the sound source was recorded. Recently, research on how spatial hearing processes are encoded in the brain has begun to be developed. As a modality for brain activity measurement that is non-invasive and has a high temporal resolution, Electroencephalography (EEG) is suitable for studying brain responses to moving sound stimuli. This study compared brain activity in hearing stereo and spatial audio stimulus. Through measurements using 21 EEG electrodes on the scalp, the results showed an increase in the mean PSD for all Theta, Alpha, and Beta waves in the spatial audio stimulus compared to stereo audio. The most significant increase in the mean PSD occurred in the Beta wave of 93.8008 µV2/Hz. Furthermore, the source localization approach with Independent Component Analysis (ICA) and Low-resolution Brain Electromagnetic Tomography (LORETA) method was used to estimate and quantify the active brain area of this process. The results showed an activation of the non-auditory cortex when the subject was hearing spatial audio stimulus. By using Paired T-Test of current density for both hearing processes, the results showed there was no significant difference (p > 0.05) in Brodmann area (BA) 41 (Primary Auditory Cortex) and BA 42 (Secondary Auditory Cortex). Meanwhile, for the spatial audio hearing process, there was a significant difference (p < 0.05) in BA 6 (Premotor Cortex), which is related to spatial orientation, and BA 9 (Dorsolateral Prefrontal Cortex), which is associated with executive functions, including working memory and selective attention. This study offers potential insights into spatial hearing research and immersive audio production.

Hybrid implementation of the fastICA algorithm for high-density EEG using the capabilities of the Intel architecture and CUDA programming

High-density electroencephalographic (EEG) systems are utilized in the study of the human brain and its underlying behaviors. However, working with EEG data requires a well-cleaned signal, which is often achieved through the use of independent component analysis (ICA) methods. The calculation time for these types of algorithms is the longer the more data we have. This article presents a hybrid implementation of the fastICA algorithm that uses parallel programming techniques (libraries and extensions of the Intel processors and CUDA programming), which results in a significant acceleration of execution time on selected architectures.

Association between gene expression and altered resting-state functional networks in type 2 diabetes

BackgroundType 2 diabetes (T2DM) is a polygenic metabolic disorder that accelerates brain aging and harms cognitive function. The underlying mechanism of T2DM-related brain functional changes has not been clarified.MethodsResting-fMRI data were obtained from 99 T2DM and 109 healthy controls (HCs). Resting-state functional connectivity networks (RSNs) were separated using the Independent Component Analysis (ICA) method, and functional connectivity (FC) differences between T2DM patients and HCs within the RSNs were detected. A partial least squares (PLS) regression was used to test the relation between gene expression from Allen Human Brain Atlas (AHBA) and intergroup FC differences within RSNs. Then the FC differences-related gene sets were enriched to determine the biological processes and pathways related to T2DM brain FC changes.ResultThe T2DM patients showed significantly increased FC in the left middle occipital gyrus (MOG) of the precuneus network (PCUN) and the right MOG / right precuneus of the dorsal attention network (DAN). FC differences within the PCUN were linked with the expression of genes enriched in the potassium channel and TrkB-Rac1 signaling pathways and biological processes related to synaptic function.ConclusionThis study linked FC and molecular alterations related to T2DM and suggested that the T2DM-related brain FC changes may have a genetic basis. This study hoped to provide a unique perspective to understand the biological substrates of T2DM-related brain changes.

Large-scale networks changes in Wilson’s disease associated with neuropsychiatric impairments: a resting-state functional magnetic resonance imaging study

BackgroundIn Wilson’s disease (WD) patients, network connections across the brain are disrupted, affecting multidomain function. However, the details of this neuropathophysiological mechanism remain unclear due to the rarity of WD. In this study, we aimed to investigate alterations in brain network connectivity at the whole-brain level (both intra- and inter-network) in WD patients through independent component analysis (ICA) and the relationship between alterations in these brain network functional connections (FCs) and clinical neuropsychiatric features to understand the underlying pathophysiological and central compensatory mechanisms.MethodsEighty-five patients with WD and age- and sex-matched 85 healthy control (HC) were recruited for resting-state functional magnetic resonance imaging (rs-fMRI) scanning. We extracted the resting-state networks (RSNs) using the ICA method, analyzed the changes of FC in these networks and the correlation between alterations in FCs and clinical neuropsychiatric features.ResultsCompared with HC, WD showed widespread lower connectivity within RSNs, involving default mode network (DMN), frontoparietal network (FPN), somatomotor network (SMN), dorsal attention network (DAN), especially in patients with abnormal UWDRS scores. Furthermore, the decreased FCs in the left medial prefrontal cortex (L_ MPFC), left anterior cingulate gyrus (L_ACC), precuneus (PCUN)within DMN were negatively correlated with the Unified Wilson’s Disease Rating Scale-neurological characteristic examination (UWDRS-N), and the decreased FCs in the L_MPFC, PCUN within DMN were negatively correlated with the Unified Wilson’s Disease Rating Scale-psychiatric symptoms examination (UWDRS-P). We additionally discovered that the patients with WD exhibited significantly stronger FC between the FPN and DMN, between the DAN and DMN, and between the FPN and DAN compared to HC.ConclusionsWe have provided evidence that WD is a disease with widespread dysfunctional connectivity in resting networks in brain, leading to neurological features and psychiatric symptoms (e.g. higher-order cognitive control and motor control impairments). The alter intra- and inter-network in the brain may be the neural underpinnings for the neuropathological symptoms and the process of injury compensation in WD patients.

Resting state network connectivity is associated with cognitive flexibility performance in youth in the Adolescent Brain Cognitive Development Study

Cognitive flexibility is an executive functioning skill that develops in childhood, and when impaired, has transdiagnostic implications for psychiatric disorders. To identify how intrinsic neural architecture at rest is linked to cognitive flexibility performance, we used the data-driven method of independent component analysis (ICA) to investigate resting state networks (RSNs) and their whole-brain connectivity associated with levels of cognitive flexibility performance in children. We hypothesized differences by cognitive flexibility performance in RSN connectivity strength in cortico-striatal circuitry, which would manifest via the executive control network, right and left frontoparietal networks (FPN), salience network, default mode network (DMN), and basal ganglia network. We selected participants from the Adolescent Brain Cognitive Development (ABCD) Study who scored at the 25th, (“CF-Low”), 50th (“CF-Average”), or 75th percentiles (“CF-High”) on a cognitive flexibility task, were early to middle puberty, and did not exhibit significant psychopathology (n = 967, 47.9% female; ages 9–10). We conducted whole-brain ICA, identifying 14 well-characterized RSNs. Groups differed in connectivity strength in the right FPN, anterior DMN, and posterior DMN. Planned comparisons indicated CF-High had stronger connectivity between right FPN and supplementary motor/anterior cingulate than CF-Low. CF-High had more anti-correlated connectivity between anterior DMN and precuneus than CF-Average. CF-Low had stronger connectivity between posterior DMN and supplementary motor/anterior cingulate than CF-Average. Post-hoc correlations with reaction time by trial type demonstrated significant associations with connectivity. In sum, our results suggest childhood cognitive flexibility performance is associated with DMN and FPN connectivity strength at rest, and that there may be optimal levels of connectivity associated with task performance that vary by network.

An Optimization Ensemble for Integrated Energy System Configuration Strategy Incorporating Demand–Supply Coordination

As one representative smart energy infrastructure in smart cities, an integrated energy system (IES) consists of several types of energy sources, thus making more complicated coupling connections between the supply and demand sides than a power grid. This will impact when allocating different energy sources to ensure the appropriate energy utilization in the IES. With this motivation, an IES energy configuration optimization strategy based on a multi-model ensemble is proposed in this paper. Firstly, one coupling model is constructed to assess the underlying collaborative relationships between two sides for a renewable-energy-connected IES. Next, the independent component analysis (ICA) method is implemented for noise reduction in massive heterogeneous input databases, which can effectively improve the computing efficiency under such high-dimensional data conditions. Also, the self-adaptive quantum genetic model (SAQGM) is built for subsequent configuration optimization. Specifically, the quantum bit representation is incorporated to reduce computation complexity in multi-states scenarios, the double-chain formation of chromosomes is deployed to diminish the uncertainty when encoding, and the dynamic adaptation quantum gate is established to successively amend parameters. Finally, an empirical case study is conducted which can demonstrate the benefits of this strategy in terms of feasibility, efficiency, and economy.

Trustworthy and intelligent fault diagnosis with effective denoising and evidential stacked GRU neural network

AbstractWith the advances in Internet-of-Things and data mining technologies, deep learning-based approaches have been widely used for intelligent fault diagnosis of manufacturing assets. However, uncertainty caused by the non-stationary process data such as vibration signal and noise interference in practical working environments will greatly affect the performance and reliability of predictions. The present paper develops a trustworthy and intelligent fault diagnosis framework based on a two-stage joint denoising method and evidential neural networks. The proposed denoising method integrating the improved complete ensemble empirical mode decomposition with adaptive noise (ICEEMDAN) and the independent component analysis (ICA) method can effectively reduce data uncertainty caused by noise interference. The stacked gated recurrent unit (SGRU) model has been incorporated into the evidential neural networks as a deep classifier. The proposed evidential SGRU (ESGRU) method can quantify the prediction uncertainty, which estimates the prediction trustworthiness. Predictive entropy and reliability diagrams are used as calibration methods to validate the effectiveness of uncertainty estimation. The proposed framework is validated by two case studies of rolling bearing fault diagnosis in variable noise conditions. Experimental results demonstrate that the proposed method can achieve a high denoising effect and provide reliable uncertainty prediction results which are significant for practical applications.

Novel reduced kernel independent component analysis for process monitoring

Kernel independent component analysis (KICA), as a nonlinear extension monitoring method of independent component analysis (ICA), has attracted significant attention. To accomplish different monitoring tasks for nonlinear systems with non-Gaussian data distribution, many modified algorithms based on KICA have also been designed. However, most of the existing methods suffer from defects; for example, the computation time increases with the number of training samples and the models are insensitive to minor faults. Nevertheless, there is currently limited research on addressing these defects, which greatly limits their application in industrial processes. To fill these gaps, a novel reduced kernel independent component analysis (NRKICA) method is proposed to reduce the computation complexity and improve the ability of minor fault detection at the same time. In this approach, an important factor is defined to measure the ability of the samples to represent the properties of the system. In addition, then the top-n important observations are selected to build a data dictionary. To improve the sensitivity to minor faults, the [Formula: see text] and [Formula: see text] statistics are redesigned by introducing information from past observations. Besides, the kernel parameter is optimized by the tabu search algorithm. The proposed method is applied to fault detection with a numerical example and the Tennessee Eastman process (TEP), and the experimental results verify the effectiveness and sensitivity of the proposed method.

Brain-Computer Interface: The HOL-SSA Decomposition and Two-Phase Classification on the HGD EEG Data.

An efficient processing approach is essential for increasing identification accuracy since the electroencephalogram (EEG) signals produced by the Brain-Computer Interface (BCI) apparatus are nonlinear, nonstationary, and time-varying. The interpretation of scalp EEG recordings can be hampered by nonbrain contributions to electroencephalographic (EEG) signals, referred to as artifacts. Common disturbances in the capture of EEG signals include electrooculogram (EOG), electrocardiogram (ECG), electromyogram (EMG) and other artifacts, which have a significant impact on the extraction of meaningful information. This study suggests integrating the Singular Spectrum Analysis (SSA) and Independent Component Analysis (ICA) methods to preprocess the EEG data. The key objective of our research was to employ Higher-Order Linear-Moment-based SSA (HOL-SSA) to decompose EEG signals into multivariate components, followed by extracting source signals using Online Recursive ICA (ORICA). This approach effectively improves artifact rejection. Experimental results using the motor imagery High-Gamma Dataset validate our method's ability to identify and remove artifacts such as EOG, ECG, and EMG from EEG data, while preserving essential brain activity.

Application of non-Gaussian feature enhancement extraction in gated recurrent neural network for fault detection in batch production processes

The nonlinear, time correlation, and non-Gaussian features in data present significant challenges for effective fault detection. While the Gate Recurrent Unit (GRU) network is renowned for its capacity to manage time correlation, it falls short in capturing non-Gaussian features in process data, which can likely lead to suboptimal monitoring results. To address this limitation, the Enhancement Gate Recurrent Unit (ENGRU) is developed to perfect the fault detection accuracy of the network. Specifically, The ENGRU effectively extracts high order statistics information by employing the overcompleted independent component analysis method, thereby augmenting its ability to capture non-Gaussian properties. The extracted features information are then entered into the ENGRU model further to uncover additional hidden features beyond what the GRU can achieve. The ENGRU network, which is built upon the extracted characteristic information, even farther enhances the accuracy of the fault detection. The merits of the proposed model are demonstrated by comparing it with excellent fault detection algorithms on a benchmark platform.