Increasing NaCl Concentration Research Articles

The halotolerant exopolysaccharide-producing Rhizobium azibense increases the salt tolerance mechanism in Phaseolus vulgaris (L.) by improving growth, ion homeostasis, and antioxidant defensive enzymes

Globally, agricultural productivity is facing a serious problem due to soil salinity which often causes osmotic, ionic, and redox imbalances in plants. Applying halotolerant rhizobacterial inoculants having multifarious growth-regulating traits is thought to be an effective and advantageous approach to overcome salinity stress. Here, salt-tolerant (tolerating 300 mM NaCl), exopolysaccharide (EPS) producing Rhizobium azibense SR-26 (accession no. MG063740) was assessed for salt alleviation potential by inoculating Phaseolus vulgaris (L.) plants raised under varying NaCl regimes. The metabolically active cells of strain SR-26 produced a significant amount of phytohormones (indole-3-acetic acid, gibberellic acid, and cytokinin), ACC deaminase, ammonia, and siderophore under salt stress. Increasing NaCl concentration variably affected the EPS produced by SR-26. The P-solubilization activity of the SR-26 strain was positively impacted by NaCl, as demonstrated by OD shift in NaCl-treated/untreated NBRIP medium. The detrimental effect of NaCl on plants was lowered by inoculation of halotolerant strain SR-26. Following soil inoculation, R. azibense significantly (p ≤ 0.05) enhanced seed germination (10%), root (19%) shoot (23%) biomass, leaf area (18%), total chlorophyll (21%), and carotenoid content (32%) of P. vulgaris raised in soil added with 40 mM NaCl concentration. Furthermore, strain SR-26 modulated the relative leaf water content (RLWC), proline, total soluble protein (TSP), and sugar (TSS) of salt-exposed plants. Moreover, R. azibense inoculation lowered the concentrations of oxidative stress biomarkers; MDA (29%), H2O2 content (24%), electrolyte leakage (31%), membrane stability (36%) and Na+ ion uptake (28%) when applied to 40 mM NaCl-treated plants. Further, R. azibense increases the salt tolerance mechanism of P. vulgaris by upregulating the antioxidant defensive responses. Summarily, it is reasonable to propose that EPS-synthesizing halotolerant R. azibense SR-26 should be applied as the most cost-effective option for increasing the yields of legume crops specifically P. vulgaris in salinity-challenged soil systems.

Sulfated Nutrition Modifies Nutrient Content and Photosynthetic Pigment Concentration in Cabbage under Salt Stress.

Negative effects of salt stress may be counteracted by adequate management of sulfated nutrition. Herein, we applied 3.50, 4.25, and 5.00 mM SO42- in a nutrient solution to counteract salt stress induced by 75 and 150 mM NaCl in cabbage cv. Royal. The increase in NaCl concentration from 75 to 150 mM reduced the contents of macronutrients and micronutrients in the shoot. When increasing from 3.50 to 4.25 mM SO42-, the contents of nitrogen (N), phosphorous (P), potassium (K), calcium (Ca), magnesium (Mg), and sulfur (S) in shoots were enhanced, at both concentrations of NaCl. Increasing from 3.50 to 4.25 mM SO42- enhanced iron (Fe), zinc (Zn), manganese (Mn), and sodium (Na) concentrations with 75 mM NaCl. With 150 mM NaCl, the increase from 3.50 to 4.25 mM SO42- enhanced the contents of Cu and Mn, but also those of Na. Chlorophylls a, b, and total decreased as the concentration of SO42- increased in plants treated with 150 mM NaCl. With 75 mM NaCl, carotenoid concentration had a positive relationship with SO42-. Hence, the 4.25 mM SO42- concentration increased the contents of macronutrients and micronutrients in the presence of 75 mM NaCl, while, with 150 mM NaCl, it improved the contents of macronutrients except K. The chlorophyll a/chlorophyll b ratio remained close to 3 when the plants were treated with 5.00 mM SO42-, regardless of NaCl. Similarly, this level of SO42- increased the concentration of carotenoids, which translated into reductions in the total chlorophyll/carotenoid ratios, indicating a protective effect of the photosynthetic apparatus. It is concluded that higher doses of sulfur favor the accumulation of nutrients and increase the concentration of carotenoids under salt stress.

The effect of NaCl concentration on impact-sliding fretting corrosion behavior of Inconel 690TT heat transfer tubes

Purpose The purpose of this paper is to investigate the effect of NaCl solution with different concentrations on impact-sliding fretting corrosion behavior of Inconel 690TT steam generator heat transfer tubes. Design/methodology/approach The optical 3D profiler was used to measure the wear profile and calculated the wear volume. Corrosion behavior was studied using open circuit potential monitoring and potentiodynamic polarization testing. The morphologies and elemental distributions of wear scars were analyzed using scanning electron microscopy and energy-dispersive spectroscopy. The synergism of wear and corrosion was analyzed according to the ASTM G119 standard. Findings The corrosion tendency reflected by OCP and the corrosion current calculated by Tafel both increased with the increase of NaCl concentration. The total volume loss of the material increased with concentration, and it was known from the synergism that the volume loss caused by corrosion-enhanced wear accounted for the largest proportion, while the wear-enhanced corrosion also made a greater contribution to volume loss than tangential fretting corrosion. Through the analysis of the material morphologies and synergism of wear and corrosion, the damage mechanism was elucidated. Originality/value The research findings can provide reference for impact-sliding fretting corrosion behavior of Inconel 690TT heat transfer tubes in NaCl solution with different concentrations.

Luminal flow-stimulated superoxide participates in connecting tubule-glomerular feedback

Increasing NaCl concentration in the connecting tubule (CNT) dilates the afferent arteriole (Af-Art) through the connecting tubule-glomerular feedback (CNTGF). CNTGF is mediated by Na+ transport via epithelial Na+ channels (ENaC) in the CNT. It is unknown if CNTGF is mainly activated by NaCl concentration or sodium delivery or if there is an independent luminal flow effect. Previous studies showed that luminal flow stimulates superoxide (O2−), and O2− can activate ENaC. Thus we hypothesized that increasing luminal flow in the CNT induces CNTGF via O2− generation and ENaC activation. Rabbit Af-Arts with the adjacent CNTs were microdissected and perfused in vitro. Protocols consist of two consecutive dose-response curves to flow rate in the same preparation. When the CNT was perfused with 5mM NaCl, increasing flow rates from 5 to 10, 20, and 40 nL/min caused flow rate-dependent Af-Art dilatation (p<0.01). Adding an ENaC blocker benzamil to the perfusate blocked flow-induced Af-Art dilatation, indicating a CNTGF response. Using mathematical modeling, an increased tubular flow controlled by NaCl delivery into the CNT independently increases CNTGF vasodilation. However, when CNT was perfused with 0 mM NaCl, increasing the flow rate did not induce CNTGF vasodilation. The O2− dismutase mimetic tempol reduced flow-induced CNTGF. In the presence of L-NAME (NOS inhibitor), the reduced CNTGF mediated by tempol was unaffected. We concluded that increasing luminal flow in CNT induces CNTGF activation via ENaC, partly due to flow-stimulated O2− production and independently of NOS. 1K01HL155235. This is the full abstract presented at the American Physiology Summit 2024 meeting and is only available in HTML format. There are no additional versions or additional content available for this abstract. Physiology was not involved in the peer review process.

NtHD9 modulates plant salt tolerance by regulating the formation of glandular trichome heads in Nicotiana tabacum

Salt stress is one of the main abiotic factor affecting plant growth. We have previously identified a key gene (NtHD9) in Nicotiana tabacum L. that positively regulates the formation of long glandular trichomes (LGTs). Here, we verified that both abiotic stress (aphids, drought and salt stress) could restore the phenotype lacking LGTs in NtHD9-knockout (NtHD9-KO) plants. The abiotic stress response assays indicated that NtHD9 is highly sensitive to salt stress. Compared with cultivated tobacco “K326” (CK) plants, NtHD9-overexpressing (NtHD9-OE) plants with more LGTs exhibited stronger salt tolerance, whereas NtHD9-KO with no LGTs showed weaker tolerance to salt. The densities and sizes of the glandular heads gradually increased with increasing NaCl concentrations in NtHD9-KO plants. Mineral element determination showed that leaves and trichomes of NtHD9-OE plants accumulated less Na+ but had higher K+ contents under salt stress, thus maintaining ion homeostasis in plants, which could contribute to a robust photosynthetic and antioxidant system under salt stress. Therefore, NtHD9-OE plants maintained a larger leaf area and root length under high-salt conditions than CK and NtHD9-KO plants. We verified that NtHD9 could individually interact with NtHD5, NtHD7, NtHD12, and NtJAZ10 proteins. Salt stress led to an increase in jasmonic acid (JA) levels and activated the expression of NtHDs while inhibiting the expression of NtJAZ. This study suggests that the glandular heads play an important role in plant resistance to salt stress. The activation of JA signaling leading to JAZ protein degradation may be key factors regulating the glandular heads development under salt stress.

Molecular Insights into the Dual Promotion-Inhibition Effects of NaCl at Various Concentrations on the CO2 Hydrate Growth: A Molecular Simulation Study.

Hydrate-based CO2 storage in the ocean is considered a potential method for mitigating the greenhouse effect. Numerous studies demonstrated that NaCl exhibited the dual effects of promotion and inhibition in the nucleation and growth processes of CO2 hydrate, whose mechanisms remain unclear. In this study, the effects of NaCl at various concentrations on the CO2 hydrate growth and crystal are investigated. The independent gradient model based on Hirshfeld partition, electrostatic potential, and binding energy is conducted to study the interaction between ions and water molecules. The motion trajectories of ions are observed at the molecular level to reflect the impact of ion motion on hydrate growth. The results show that the influence of NaCl on hydrate growth depends on a delicate balance of dual promotion-inhibition effects. NaCl can combine more water molecules and provide a transport channel of CO2 to promote hydrate growth at low concentrations. Meanwhile, the promoting effects shift toward inhibition with increasing NaCl concentrations. In a word, this paper proposes a novel mechanism for the dual promotion-inhibition effects of NaCl on hydrate growth, which is significant for further research on hydrate-based CO2 storage in the ocean.

High NaCl Concentrations in Water Are Associated with Developmental Abnormalities and Altered Gene Expression in Zebrafish.

Salt is frequently introduced in ecosystems, where it acts as a pollutant. This study examined how changes in salinity affect the survival and development of zebrafish from the two-cell to the blastocyst stage and from the blastocyst to the larval stage. Control zebrafish embryos were cultured in E3 medium containing 5 mM Sodium Chloride (NaCl), 0.17 mM Potassium Chloride (KCL), 0.33 mM Calcium Chloride (CaCl2), and 0.33 mM Magnesium Sulfade (MgSO4). Experiments were conducted using increasing concentrations of each individual salt at 5×, 10×, 50×, and 100× the concentration found in E3 medium. KCL, CaCl2, and MgSO4 did not result in lethal abnormalities and did not affect early embryo growth at any of the concentrations tested. Concentrations of 50× and 100× NaCl caused embryonic death in both stages of development. Concentrations of 5× and 10× NaCl resulted in uninflated swim bladders in 12% and 65% of larvae, compared to 4.2% of controls, and caused 1654 and 2628 genes to be differentially expressed in blastocysts, respectively. The ATM signaling pathway was affected, and the Sonic Hedgehog pathway genes Shh and Ptc1 implicated in swim bladder development were downregulated. Our findings suggest that increased NaCl concentrations may alter gene expression and cause developmental abnormalities in animals found in affected ecosystems.

Effectiveness study of recrystallisation method in pharmaceutical salt production from processed salt with zero waste concept

Indonesia's vast archipelago offers abundant seawater resources, holding the potential for salt production. Salt, a vital commodity in human life, typically contains sodium chloride and impurities like Ca2+, Mg2+, SO42−, and K+. Pharmaceutical salt is an industrial category adhering to pharmacopoeial standards regarding sodium chloride levels and impurity content, ensuring quality for drug preparations in Indonesia. Prior research indicates that recrystallisation, specifically evaporation crystallisation, enhances salt quality by increasing NaCl content. Chemical precipitating agents like NaOH and Na2CO3 can be introduced to improve salt purity further. This study aims to identify optimal conditions for pharmaceutical salt production from processed salt raw materials, considering crystallisation time, stirring speed, chemical additives (NaOH and Na2CO3), and double crystallisation stages. The method commences with pre-treatment, involving salt dissolution in distilled water to saturation, with the addition of precipitating agents as per designated variables. Precipitates formed from precipitating agents (NaOH and Na2CO3) are isolated through filtration. The filtrate undergoes evaporation crystallisation at 103 °C, varying between single and double crystallisation. Salt crystals are separated, dried, and weighed to calculate yield. Pharmaceutical salt is analysed for water content, NaCl, and impurities (Ca2+, Mg2+, SO42−, and K+). The optimal conditions for pharmaceutical salt production were double crystallisation with a 20 % excess of chemicals (NaOH and Na2CO3), 100 min of crystallisation time, and a stirring speed of 600 rpm. This yielded a 15 % NaCl content of 99.87 %, Mg2+ at 0 ppm, Ca2+ at 69.6 ppm, SO42− at 366 ppm, K+ at 370 ppm, and water content at 0.166 %. Notably, the pharmaceutical salt production process generates no waste, as byproducts like Mg(OH)2 and CaCO3 can be recycled and hold commercial value. However, it is essential to re-evaluate raw materials and technologies to address the market's high cost and competitiveness issues.

Antioxidant production promotes defense mechanism and different gene expression level in Zeamays under abiotic stress

The growth and productivity of maize are severely affected by soil salinity. The crucial determinants for the future performance of plants are productive for seed germination and seedling establishment; however, both stages are liable to soil salinity. For grain, maize is an economically significant crop sensitive to abiotic stresses. However, little is known about defense responses by the salinity-induced antioxidant and oxidative stress in maize. In our work, the commercially available maize variety Raka-Poshi was grown in pots for 30 days under greenhouse conditions. To evaluate the salt-induced oxidative/antioxidant responses in maize for salt stress 0, 25, 50, 75, 100 and 150 mM concentrations, treatments were provided using sodium chloride (NaCl). All the biochemical indices were calculated under all NaCl concentrations, while drought was induced by up to 50% irrigation water. After 30 days of seed germination, the maize leaves were collected for the measurement of lipid peroxidase or malondialdehyde (MDA), glutathione reductase (GR), guaiacol peroxidase (GPOD), hydrogen peroxide (H2O2), superoxide dismutase (SOD), lipoxygenase (LOX), catalase (CAT), ascorbate peroxidase (APOD) and glutathione-S-transferase (GST). The results revealed a 47% reduction under 150 mM NaCl and 50% drought stress conditions. The results have shown that the successive increase of NaCl concentrations and drought caused an increase in catalase production. With successive increase in NaCl concentration and drought stress, lower levels of H2O2, SOD, and MDA were detected in maize leaves. The results regarding the morphology of maize seedlings indicated a successive reduction in the root length and shoot length under applications of salt and drought stress, while root-to-shoot weights were found to be increased under drought stress and decreased under salt stress conditions During gene expression analysis collectively indicate that, under drought stress conditions, the expression levels of all nine mentioned enzyme-related genes were consistently downregulated.

Enhancing soy protein isolate gels: Combined control of pH and surface charge for improved structural integrity and gel strength

The application of sophisticated technologies to enhance soy protein isolate (SPI) gelation in the industry faces limitations due to high costs and technical intricacies. This investigation examined how different combinations of pH pretreatment and NaCl concentration affect the gel properties of SPI. Decreasing pH and increasing NaCl concentration caused soy protein particle sizes to increase in the solution due to reduced electrostatic repulsion. Additionally, decreasing pH and increasing NaCl concentration reduced the absolute zeta potential, promoting particle collisions and aggregation in SPI solutions and influencing gel strength. Rheological studies showed that lowering pH levels decreased gelation temperatures and increased gel strength. However, extreme pH levels compromised gel integrity, impacting water-holding capacity and microstructure. Supplementing SPI pretreated at pH 6.0 with 100 mM NaCl notably boosted the gel strength compared to other pretreatment methods. Further solvent analyses revealed that interactions governing gel strength-hydrogen bonding and hydrophobic interactions emerged as crucial contributors. This comprehensive investigation sheds light on the intricate interplay of factors influencing SPI gel formation, providing crucial insights for future industrial-scale applications.

Separation of Chloride and Sulfate Ions from Desulfurization Wastewater Using Monovalent Anions Selective Electrodialysis.

The high concentration of chloride ions in desulphurization wastewater is the primary limiting factor for its reusability. Monovalent anion selective electrodialysis (S-ED) enables the selective removal of chloride ions, thereby facilitating the reuse of desulfurization wastewater. In this study, different concentrations of NaCl and Na2SO4 were used to simulate different softened desulfurization wastewater. The effects of current density and NaCl and Na2SO4 concentration on ion flux, permselectivity (PSO42-Cl-) and specific energy consumption were studied. The results show that Selemion ASA membrane exhibits excellent permselectivity for Cl- and SO42-, with a significantly lower flux observed for SO42- compared to Cl-. Current density exerts a significant influence on ion flux; as the current density increases, the flux of SO42- also increases but at a lower rate than that of Cl-, resulting in an increase in permselectivity. When the current density reaches 25 mA/cm2, the permselectivity reaches a maximum of 50.4. The increase in NaCl concentration leads to a decrease in the SO42- flux; however, the permselectivity is reduced due to the elevated Cl-/SO42- ratio. The SO42- flux increases with the increase in Na2SO4 concentration, while the permselectivity increases with the decrease in Cl-/SO42- ratio.

Interfacial properties of the brine + carbon dioxide + oil + silica system.

Molecular dynamics simulations of the H2O + CO2 + aromatic hydrocarbon and H2O + CO2 + benzene + silica (hydrophilic) systems are performed to gain insights into CO2-enhanced oil recovery (EOR) processes. For comparison purposes, an overview of the previous simulation studies of the interfacial properties of the brine + CO2 + alkane + silica system is also presented. In general, the water contact angle (CA) of the H2O + CO2 + silica (hydrophilic) system increased with pressure and decreased with temperature. The CAs of the H2O + hydrocarbon + silica (hydrophilic) system are not significantly affected by temperature and pressure. The simulated CAs were in the ranges of about 58°-77° and 81°-93° for the H2O + hexane + silica (hydrophilic) and the H2O + aromatic hydrocarbon + silica (hydrophilic) systems, respectively. In general, these CAs were not significantly influenced by the addition of CO2. The simulated CAs were in the ranges of about 51.4°-95.0°, 69.1°-86.0°, and 72.0°-87.9° for the brine + CO2 + silica (hydrophilic), brine + hexane + silica (hydrophilic), and brine + CO2 + hexane + silica (hydrophilic) systems, respectively. All these CAs increased with increasing NaCl concentration. The adhesion tension of the brine + silica (hydrophilic) system in the presence of CO2 and/or hexane decreased with increasing salt concentration. The simulated CAs were in the range of about 117°-139° for the H2O + alkane + silica (hydrophobic) system. These CAs are increased by the addition of CO2. At high pressures, the distributions of H2O normal to the silica (hydrophobic) surface in the droplet region of the H2O + silica system were found to be strongly affected by the presence of CO2. These insights might be key for optimizing the performance of the miscible CO2 water-alternating-gas injection schemes widely used for EOR.

ACC-Deaminase producing Pseudomonas putida RT12 inoculation: A promising strategy for improving Brassica juncea tolerance to salinity stress

An important abiotic stressor that hinders plant growth, nutrient uptake, and global agricultural productivity is soil salinity. Among the different strategies to overcome the issue of salinity in agriculture sector, plant growth-promoting rhizobacteria (PGPR) have gained recognition as promising beneficial microbes that can improve plants’ response to biotic and abiotic stressors. The salinity tolerance and traits that promote plant growth of eight PGPR strains (RT1, RT2, RT3, RT4, RT5, RT7, and RT12) were evaluated in this study. During screening, one strain, RT12, had the highest plant growth-promoting activity and salt tolerance in the group. The strain when subjected to NaCl stress showed quantitative ACC-deaminase activity, in the presence of NaCl at various concentrations, demonstrating extraordinary tolerance to salt stress by withstanding doses of up to 3M NaCl. In order to further investigate the effects of salt stress on Brassica juncea (mustard), RT12, which was identified as Pseudomonas putida using 16s RNA sequencing, was inoculated. Two salt treatments (100 and 150 mM) were applied to the mustard variety ‘Mingora’ in a greenhouse. The results revealed that through ACC utilization, PGPR directly induced plant growth in salt-stressed mustard plants by lowering excess ethylene production. All plant parameters were negatively impacted by an increase in NaCl concentration in uninoculated plants. However, P. putida RT12 inoculation enhanced all growth parameters, antioxidant production, total soluble sugar (TSS), total protein (TP), proline, relative water content (RWC), chlorophyll contents, and nutrient uptake in salt-treated plants. The inoculation with P. putida also caused a marked decline in Na+ uptake and an increase in K+ uptake in the shoot. By maintaining a greater K+/Na+ ratio in the tissues of RT12-inoculated plants compared to controls, this change in ion uptake helped to maintain nutritional balance of the plants. The findings suggest that inoculating plants with ACC deaminase-producing PGPR, such as P. putida RT12, may boost growth and stress resistance.

Insight into the Effects of Hydrodynamic Cavitation at Different Ionic Strengths on Physicochemical and Gel Properties of Myofibrillar Protein from Tilapia (Oreochromis niloticus).

Effects of different ionic strengths (0.2, 0.4, and 0.6 mol/L) and different hydrodynamic cavitation (HC) treatment times (0, 1, 2, 3, and 4 min) on the conformation and gel properties of tilapia myofibrillar proteins (TMP) were investigated. The results showed that the solubility of TMP was significantly enhanced (p < 0.05) with the increase in NaCl concentration, and the gel characteristics were significantly improved. After HC treatment of TMP, the average particle size was significantly reduced (p < 0.05) and solubility was significantly enhanced (p < 0.05) with the increase in treatment time, the internal hydrophobic groups and reactive sulfhydryl groups were exposed. The intrinsic fluorescence spectra showed the unfolding of the spatial tertiary structure of proteins, and the circular dichroism spectroscopy showed the significant reduction in the content of α-helix in the secondary structure of the proteins (p < 0.05). In addition, the WHC and gel strength of the TMP heat-induced gels were enhanced, which improved the microstructure of the gels, and scanning electron microscopy showed that the gel network of the TMP gels became denser and more homogeneous. Dynamic rheology results showed that HC treatment resulted in a significant increase in the final G' and G" values of TMP. In conclusion, HC treatment was able to improve the physicochemical structure and gel properties of TMP at different ionic strengths. This study presents a novel processing technique for the quality maintenance aspect of salt-reduced surimi gel products.

REMOVAL OF DIRECT BLUE DYE IN TEXTILEWASTEWATER EFFLUENT BY ELECTROCOAGULATION

Removal of direct blue dye by electrocoagulation method has been investigated using aluminum electrode in a bench-scale electrochemical system. Current density, NaCl concentration, electrocoagulation time, and dye concentration has been studied as effecting parameters in color removal efficiency. Increasing of current density will increase the color removal efficiency and energy consumption as well. While increasing NaCl concentration increase the color removal efficiency but it decrease energy consumption. High dye concentration is needed for extra electrocaogolation time to reach the same efficiency that obtained with low dye concentration .With current applied 0.35 amps. and NaCl concentration of 2 g/l more than 93% efficiency achieved in 14 min. of electrocaogolation time.

Tribological and Rheological Study of Thixotropic Gels of 2D Nanoparticles.

A thixotropic colloidal gel constituting an aqueous dispersion of synthetic clay Laponite with varying concentrations of salt has been studied for its rheological and tribological performance as a lubricant. We observed that the incorporation of NaCl induces notable enhancements in the colloidal gel's relaxation time, elastic modulus, and yield stress. Although an increase in NaCl concentration decreases the material's relaxation time dependence on waiting time (tw), overall, the strength of its thixotropic character has been observed to increase with an increase in salt concentration. The analysis of friction and wear indicated that the utilization of a thixotropic colloidal gel of Laponite with a higher concentration of NaCl resulted in progressively greater reductions in both the coefficient of friction and specific wear rates under various load-speed conditions. Severe abrasive wear on disc surface under dry test, gradually mitigated upon the introduction of these lubricants. Two simultaneous lubricating mechanisms, first, the smooth sliding of the friction pair, facilitated by the alignment of Laponite particles in the direction of shear forces, and second, the stable structure of Laponite, coupled with the addition of NaCl, enabling continuous replenishment of the wear track with lubricant, are attributed to lubrication effectiveness.

Effects of NaCl application on cesium concentration, number, and size of epidermal bladder cells in quinoa plants

Quinoa (Chenopodium quinoa Willd.) plants possess epidermal bladder cells (EBCs) on the leaf surface that accumulate excess sodium (Na+). However, whether excess cesium (Cs+) is transported from the leaf to the EBCs has not been elucidated in quinoa plants. In this study, the Cs+ concentration of EBCs and leaves of quinoa plants grown in soil treated with high concentrations of NaCl was investigated via pot experiments. Three different treatments were performed: 9.75 g plot, and 19.50 g plot, and a control (with no added NaCl). In 9.75 g plot and 19.50 g plot, 9.75 g and 19.5 g of NaCl were applied to the soil, respectively. And 0.10 g of CsCl were applied to all pots. We observed that Na+ concentration in EBCs and leaves with and without EBCs increased with increasing NaCl concentration at the vegetative and flowering stages; Na+ concentration was lower in the EBCs than in both types of leaves at both growth stages. Cs+ concentration in EBCs and both types of leaves increased with increasing NaCl concentration; Cs+ concentration was higher in EBCs than in both types of leaves at both growth stages. However, NaCl application did not affect the number of EBCs at both growth stages, but the number of EBCs in older leaves was lower than that in younger leaves at both growth stages. Moreover, EBC diameter increased with NaCl application at both growth stages; the EBCs of younger leaves (1st leaf) were larger than those of older leaves (5th leaf) at both growth stages. Therefore, NaCl increased the Cs+-accumulation capacity of quinoa plants by increasing the size of the EBCs.

Structure of KOH-soluble polysaccharides from сoniferous greens of Norway spruce (Picea abies): The pectin-xylan-AGPs complex. Part 1

Using 7 % KOH, the polysaccharide PAK has been isolated from the coniferous greens of Norway spruce. PAK was found to contain predominantly arabinoglucuronoxylan, xyloglucan and arabinan, but also pectic polysaccharides, glucomannan and arabinogalactan proteins (AGPs), as determined by 1D/2D NMR analysis. It was found that fractionation of PAK on DEAE-cellulose resulted in simultaneous elution of pectins, arabinoglucuronoxylans and AGPs. It was evident that the content of 4-OMe-α-D-GlcpA and xylose, 1,4-β-D-GlcpA, and T-β-D-GlcpA increased with an increase in NaCl concentration. However, 1,4-α-D-GalpA content was almost independent of NaCl concentration, indicating unchanged pectic polysaccharide concentration. Interestingly, pectins extracted with 0.1–0.3 M NaCl solutions were richer in rhamnogalacturonan-I (RG-I) than those extracted with water and 0.01 M NaCl. Conclusion: The content of RG-I, AGPs and arabinoglucuronoxylan rises with rising NaCl concentration. An intense signal indicating an intermolecular linkage between the xylan and RG-I domains, i.e. that part of the arabinoglucuronoxylan is covalently bound to RG-I, is observed in the HMBC spectra of the polysaccharides obtained. The discovery here of a new relationship between rhamnogalacturonan I and xylan contradicts the prevailing cell wall model.

Electrochemical migration behavior between Cu and Ag under a thin electrolyte layer containing chloride

PurposeThe purpose of this paper is to investigate the effects of chloride ion concentration and applied bias voltage on the electrochemical migration (ECM) behavior between Cu and Ag under an NaCl thin electrolyte layer (TEL).Design/methodology/approachA self-made experimental setup for the ECM behavior between Cu and Ag was designed. An HD video measurement microscopy was used to observe the typical dendrite/corrosion morphology and pH distribution. Short-circuit time (SCT), short-circuit current density and the influence of the galvanic effect between Cu and Ag on their ECM behavior were studied by electrochemical tests. The surface morphology and composition of dendrite were characterized by FESEM/EDS.FindingsThe SCT increased with increasing NaCl concentration but decreased with increasing applied bias voltage, and the SCT between Cu and Ag was less than that between Cu and Cu because their galvanic effect accelerated the dissolution and migration of Cu. When NaCl concentration was less than or equal to 6 mmol/L, cedar-like dendrite was formed, whereas no dendrite formed and only precipitation occurred at high chloride ion concentration (100 mmol/L). The composition of the dendrite between Cu and Ag was copper.Research limitations/implicationsThe significance of this study is to clarify the ECM failure mechanism of printed circuit board (PCB) with an immersion silver surface finish (PCB-ImAg).Practical implicationsThis study provides a basic theoretical basis for the selection of protective measures and metal coatings for PCB.Social implicationsThe social implication of this study is to predict the service life of PCB.Originality/valueThe ECM behavior of dissimilar metals under a TEL was investigated, the influence of the galvanic effect between them on their ECM was discussed, and the SCT increased with increasing NaCl concentration.

Electrogeneration of Hypochlorite Ions using a Dimensionally Stable Anode-Type (Ti/PtPd(10%)Ox) Electrode

&lt;p&gt;The study examined the electrogeneration of hypochlorite ions (ClO&lt;sup&gt;−&lt;/sup&gt;) via electrolysis of aqueous NaCl solutions using a dimensionally stable anode-type (DSA-type) electrode based on platinum and palladium oxides supported on titanium mesh (Ti/PtPd(10%)O&lt;sub&gt;x&lt;/sub&gt;). The electrogenerated ClO&lt;sup&gt;−&lt;/sup&gt; was quantified on the basis of the absorption band at 292 nm (A&lt;sub&gt;λ&lt;/sub&gt; = 292) of the UV-Vis spectrum. The effect of initial pH, concentration of NaCl, cell potential difference and electrolysis time were investigated in this study. The results showed that the electrolysis of aqueous NaCl solutions increases the solution pH up to high values (≥ 8.0) that favor the formation of ClO&lt;sup&gt;−&lt;/sup&gt; over chlorine or hypochlorous acid. The hypochlorite concentration increases significantly at pH values &gt; 7.0 and shows a linear trend with increasing NaCl concentration and with increasing cell potential difference. When the cell potential and NaCl concentration are held constant, the maximum hypochlorite value during electrolysis depends on both the cell potential and NaCl concentration. The Ti/PtPd(10%)O&lt;sub&gt;x&lt;/sub&gt; anode favors the production of hypochlorite ions, making this anode a promising material for use in electrochemical oxidation of wastewater via an indirect mechanism.&lt;/p&gt;