In this study, acrylic-based nanocomposites containing different contents of multi-walled carbon nanotubes (MWCNTs) and metal oxide nanoparticles (i.e., TiO2, CuO and Fe2O3) were fabricated by solvent mixing method. The thermal conductivity of these samples was evaluated. The results indicated that the thermal conductivity of all fabricated samples was significantly improved even at small loading of MWCNTs. It was found that the thermal conductivity was enhanced by increase in MWCNTs content up to 5 wt%. Similarly, the metal oxide nanoparticles caused up to 75 % increment in thermal conductivity at 1.5 wt% of their loading in acrylic film. Contrary to expectations, the thermal conductivity of acrylic film was more increased by nanometal oxides (i.e., TiO2, CuO and Fe2O3) than MWCNTs. The effect of hybridizing of nanometal oxide particles (1.5 wt%) and MWCNTs (1.5 wt%) on thermal conduction was investigated as well. It was found that hybridizing improved thermal conductivities by about 85, 94 and 97 % for Fe2O3, TiO2 and CuO, respectively. Finally, the effects of TiO2 pigment and CaCO3 extender on the thermal conductivity of acrylic polymer and nano-TiO2 acrylic composites were studied. It was found that TiO2 could increase considerably thermal conduction of its acrylic films and acrylic nanocomposites.