Increase In Droplet Size Research Articles

Morphological evolution of nano-droplets impinging on cylindrical wall: A molecular dynamics study

The impact of droplets on solid walls is the primary behavior in spray cooling, seawater desalination, self-cleaning, and other technological processes. Based on the molecular dynamics (MD) method, the morphological evolution characteristics of nanodroplets impinging on the copper cylinder wall are studied. The effects of droplet size, initial velocity, impact position, and wall wettability on nanodroplet dynamics are analyzed. The results indicate that a single nanodroplet impacting on a nanocylinder exhibits four distinct impact modes: spread-partially wrapped-deposition (SPD), spread-completely wrapped-deposition (SCD), spread-completely wrapped-splitting-deposition (SCSD), and spreading-partially wrapped-splitting-deposition (SPSD). The trend of the influence of initial velocity and droplet size on the impact mode is similar. As the initial velocity and droplet size increase, the droplet’s kinetic energy and inertia force increase, successively exhibiting the SPD, SCD, and SCSD modes. The trend of the influence of impact position and wall wettability on the droplet impact mode is similar. When the impact eccentricity distance is small, and the wall is highly hydrophilic, it exhibits the SCD mode. With increasing impact eccentricity and enhanced wall hydrophobicity, the adhesion force between the droplet and the cylinder wall decreases, making the droplet less likely to be captured and more prone to splitting, exhibiting the SPSD mode. The change in droplet centroid height and mean square displacement could predict whether the droplet undergoes a splitting mode, and its influence is most significant at the impact position. Constrained by the cylindrical wall, the droplet impacts radially and spreads primarily in that direction. With the enhancement of wall hydrophilicity, the migration region of the three-phase contact line expands, and the droplet spreading transforms into synchronous development along the radial and axial directions. The research results can enrich the dynamic mechanism of micro-nano scale droplet impact and provide potential guidance for optimizing relevant technologies.

Numerical Investigations of the Kinetic Behavior of Adhering Droplets on the Inclined Windshield in Airflows

A theoretical foundation for implementing surface self-cleaning can be provided by analyzing the motion of adhering droplets in airflow. When driving in rainy circumstances, self-cleaning windshield technology can efficiently guarantee driver safety. In this study, the CLSVOF method is employed to simulate a three-dimensional wind tunnel model, enabling an investigation into the dynamics of droplets adhering to a windshield under the influence of airflow. Subsequent analysis mainly focuses on the impacts of wind velocity and droplet size on the motion patterns and morphological characteristics of the droplets. The temporal evolution of the forces acting on the droplets is examined, along with a comparative analysis of the predominant forces driving droplet motion against other forms of resistance. The results demonstrate that the motion patterns of the droplets can be broadly categorized into three phases: accelerated decline, forces equilibrium, and accelerated climb. As wind speed increases, there is a noticeable reduction in the wetting length Ld, while the height of the droplets H and the dominant force influencing their motion shift from gravitational component Fgsinα to wind traction force Fwind. Moreover, an increase in droplet size accentuates the lag in changes to wetting length, droplet height, and the contact angle.

Experimental investigation of the effect of droplet size on the vaporization of butanol in turbulent environments at elevated pressure

This paper presents an experimental study of the effect of droplet size on the vaporization rate of butanol fuel under turbulent flow conditions at elevated pressure and room temperature. The butanol droplet is suspended at the intersection of two micro-fibers in the center of a spherical vessel. The initial size of the butanol droplet is varied in the range between 300 and 700 μm. A controlled turbulent flow field, characterized by quasi-zero mean velocity and turbulence intensity of up to 1.5 m/s, was generated by eight axial fans. The findings reveal an improvement in the vaporization rate of butanol droplet as the droplet size increases. This improvement is more pronounced under conditions of elevated pressure and turbulence intensity. The results show that turbulence begins to influence the vaporization process when the droplet diameter exceeds the Kolmogorov length scale. Butanol droplet vaporization rate is found to lie between heptane and decane, leaning towards decane under all explored test conditions. The results reveal that the vaporization rate of hydrocarbon fuels is more sensitive to the droplet size variations than butanol. Turbulence is found to exert greater impact on the vaporization of fuels that have lower gas-phase mass diffusivity and higher thermal diffusivity. Finally, the previously proposed correlations, expressed in terms of Damköhler and turbulent Reynolds numbers, are assessed and found capable of predicting the vaporization of butanol droplet over a wide range size.

Aqueous dispersions of oleic acid nanodroplets for thymol encapsulation

This study focuses on the use of oleic acid to disperse thymol as nanodroplets, stabilized by a mixture of alkylpolyglucoside and lecithin, in an aqueous environment. This approach aims to develop innovative platforms for the encapsulation and release of poorly water-soluble molecules such as thymol, useful for drug delivery and insecticide systems. The results highlight the critical role of controlling the content and concentration of the oil phase (thymol-oleic acid mixture) in achieving optimal thymol dispersion and nanodispersion stability. The interplay between the ability of oleic acid to inhibit thymol crystallization and the maximum dispersible oil amount is crucial. It affects the dispersion of thymol within the nanodroplets and influences coalescence and Ostwald ripening phenomena. The balance between oleic acid and thymol content is key: while oleic acid stabilizes dispersions, higher thymol content increases droplet size, potentially triggering destabilization. The uneven distribution of thymol within the droplets, revealed by fluorescence spectroscopy, suggests that up to three different chemical environments exist. This investigation may pave the way for the development of efficient platforms to improve access to biologically relevant, poorly soluble molecules.

Pumpkin Injury and Yield Response to Low Rates of 2,4-D Choline and Dicamba

The recent release of 2,4-D- and dicamba-tolerant soybean traits has increased the risk of off-target herbicide injury and yield loss for specialty crop growers in the midwestern United States. Most dicotyledonous plants, including many specialty crops like pumpkin (Cucurbita pepo), are susceptible to synthetic auxin herbicides; however, the relationship between off-target herbicide rate, visible crop injury, and eventual yield loss is not well documented. The objective of this 2-year field study in 2019 and 2020 was to determine the effect of sublethal herbicide rates of 2,4-D and dicamba on visible injury and crop yield loss in pumpkin when applied at the vegetative and flowering growth stages. Herbicides included 2,4-D choline salt (1066 g ae·ha−1 labeled rate) and dicamba diglycolamine salt (560 g ae·ha−1 labeled rate) ranging from 1/500 to 1/4 of the labeled rate. Visible injury ratings were recorded every 7 d after application and pumpkins were harvested and weighed when ripe. Injury and yield data were fit to a four-parameter log-logistic regression model to estimate effective doses (ED) required for 5% to 50% visible injury or yield loss. Pumpkin treated with the 1/10 and 1/4 rates of 2,4-D at both growth stages had visible injury (± 1 SE) ranging from 8% (± 3%) to 55% (± 3%), but injury did not always result in yield loss. Maximum yield loss from 2,4-D was 32% (± 2%), observed following the 1/4 rate at the vegetative growth stage in 2020 (estimated ED for 20% yield loss was ∼1/50). Pumpkin treated at the vegetative growth stage with the 1/10 and 1/4 rates of dicamba resulted in 65% (± 6%) to 82% (± 1%) visible injury and 33% (± 2%) to 86% (± 14%) yield loss (estimated ED for 20% yield loss was ∼1/10 in 2019 and ∼1/15 in 2020). At the flowering stage, dicamba rates of 1/10 and 1/4 caused visible injury of 31% (± 2%) to 74% (± 5%) and yield loss of 26% (± 10%) to 60% (± 14%) (estimated ED for 20% yield loss was ∼1/20 in 2019 and ∼1/5 in 2020). Susceptibility of pumpkin to 2,4-D and dicamba suggests herbicide applicators and pumpkin growers should consider strategies that mitigate off-target movement, including using nozzles that increase droplet size, shielded sprayers, thorough tank cleanout, buffer zones, and programs that facilitate communication between applicators and growers.

Development and characterization of a novel bigel system based on candelilla wax oleogel and guar gum hydrogel for heat-triggered release properties

This study introduces an innovative approach for the encapsulation and heat-triggered release of natural pigment, paprika oleoresin (PO) as a model pigment, by formulating oleogel-in-hydrogel bigels incorporating candelilla wax (CW). By varying the CW concentrations, the impact on the critical physicochemical properties of bigels was investigated. Increasing CW concentration from 2 to 8% elevated the sol-gel transition temperature (Tg) of the oleogels significantly, ranging from 45.83 ± 0.83 to 61.38 ± 0.51 °C (p < 0.05). Across all CW concentrations, high encapsulation efficiency over 95% was consistently observed. Conversely, reducing CW concentration increased droplet size within the bigels, varying from 13.19 ± 2.97 to 2.97 ± 0.60 μm (p < 0.05). Notably, these bigels exhibited distinct heat-triggered pigment release characteristics. In specific, the amount of released PO decreased with increased CW concentration, resulting in a lower ΔE* value. Correlation analysis highlighted CW's positive correlation with the Tg of the oleogel and bigel lightness, and its negative correlation with droplet size, cumulative pigment release content, release rate constant, redness, yellowness, and ΔE* of the bigel. These results indicate that controlling pigment release through CW-based bigels with thermoresponsive properties can enhance color stability and preserve the integrity of pigment during heat processing. This novel bigel system with heat-triggered release properties holds promise for wider application in the food industry. Overall, it addresses the critical need to stabilize and precisely regulate natural pigment release, which is important for both product quality and consumer satisfaction in the food industry.

Mist-control of polyalphaolefin (PAO) lubricants using long pairwise end-associative polymers

Accidental release of pressurized hydrocarbon fuels and lubricants are a major fire hazard due to the formation of small droplet mists that can readily evaporate and ignite. Mist control through increasing droplet size and suppressing droplets has been previously demonstrated with high molecular weight polymer additives, but traditional long polymer additives do not survive the pumping that would usually precede accidental release. This constraint inspired associative polymer additives that can transiently form the high molecular weights needed for mist control, while reversibly breaking during pumping. A prior study demonstrated the efficacy of such a system in fuel: long telechelic polycyclooctadiene (PCOD) with pairwise associating acid and base end-groups. Here, we address an obstacle to applying this same polymeric system in a polyalphaolefin (PAO) solvent—its poorer solvent quality for PCOD than fuel. We measured the effects of the end-associative PCOD compared to a non-associative control on the rheological properties of solutions in both PAO (a common lubricant and heat transfer fluid) and decahydronapthalene (decalin, a solvent with PCOD solubility similar to fuel) in shear and extension, and connect those rheological modifications to observed changes in PAO spray under simulated accidental release conditions. The PCOD additives demonstrated substantial mist control in PAO, both in terms of reduced spray angle and droplet suppression. Despite the worse solubility in PAO and thus smaller effective coil size, these associative PCOD additives are effective at the low concentrations (¡0.1 wt %) necessary for practical use as a safety measure.

SARS-CoV-2 Infection Alters the Phenotype and Gene Expression of Adipocytes.

Epidemiological evidence emphasizes that excess fat mass is associated with an increased risk of severe COVID-19 disease. Nevertheless, the intricate interplay between SARS-CoV-2 and adipocytes remains poorly understood. It is crucial to decipher the progression of COVID-19 both in the acute phase and on long-term outcomes. In this study, an in vitro model using the human SGBS cell line (Simpson-Golabi-Behmel syndrome) was developed to investigate the infectivity of SARS-CoV-2 in adipocytes, and the effects of virus exposure on adipocyte function. Our results show that SGBS adipocytes expressing ACE2 are susceptible to SARS-CoV-2 infection, as evidenced by the release of the viral genome into the medium, detection of the nucleocapsid in cell lysates, and positive immunostaining for the spike protein. Infected adipocytes show remarkable changes compared to uninfected controls: increased surface area of lipid droplets, upregulated expression of genes of inflammation (Haptoglobin, MCP-1, IL-6, PAI-1), increased oxidative stress (MnSOD), and a concomitant reduction of transcripts related to adipocyte function (leptin, fatty acid synthase, perilipin). Moreover, exogenous expression of spike protein in SGBS adipocytes also led to an increase in lipid droplet size. In conclusion using the human SGBS cell line, we detected SARS-CoV-2 infectivity in adipocytes, revealing substantial morphological and functional changes in infected cells.

New discovery of the coalescence kinetics of sesame oil droplets under a high internal phase: A highly efficient oil extraction technique

Traditional pressing is of low efficiency (< 80 %). A highly efficient sesame oil extraction technique was discovered via micro-hydration of sesame paste (φ = ∼ 75 %) and then agitation with a yield of ∼ 95 %. However, the extraction mechanism is still unknown. To uncover this, microscopic imaging was used, and it found that agitation progressively increased the droplet size of micro-hydrated paste (φ = 74.5 %) from an initial size of < 4 μm. As agitated for 20 min, almost 85 % (v/v) of oil was over 20 μm, which was linearly and positively correlated (R2 > 0.96) with oil yield. Increase in droplet size was due to droplet compression, film rupture, and droplet coalescence. The coalescence frequency based on agitation time followed an exponent curve (R2 > 0.97). This coalescence might be related to the decreased water relaxation time and increased paste viscosity. This study, for the first time, found the oil droplet coalescence in hydrated sesame paste (φ = 74.5 %) during agitation, thereby successfully extracting oil at room temperature. The findings of this work can be a starting point for research on micro-hydration extraction for oil-containing materials from a packing density of oil droplets point view.

Anomalous coarsening of coalescing nucleoli in human cells

Coarsening is a ubiquitous phenomenon in droplet systems near thermodynamic equilibrium—as an increase in droplet size lowers the system’s free energy—however, coarsening of droplets in nonequilibrium systems, such as the cell nucleus, is far from understood. Liquid condensates in the cell nucleus, like nucleoli, form by liquid-liquid phase separation and play a key role in the nuclear organization. In human cells, nucleolar droplets are nucleated at the beginning of the cell cycle and coarsen with time by coalescing with each other. Upon coarsening, human nucleoli exhibit an anomalous volume distribution P(V)∼V−1, which cannot be explained by any existing theory. In this work, we investigate physical mechanisms behind the anomalous coarsening of human nucleoli. Using spinning disk confocal microscopy, we simultaneously record dynamic behavior of nucleoli and their surrounding chromatin before their coalescence in live human cells. We find that nucleolar anomalous coarsening persists during the entire cell cycle. We measure chromatin flows and density between and around nucleoli, as well as relative motion of two nucleoli before they coalesce. We find that, before nucleolar coalescence, chromatin concentration decreases in the space between nucleoli and the nucleoli move faster toward each other, resembling an effective depletion attraction between the coalescing nucleoli. Indeed, our computational simulations of nucleolar dynamics show that short-ranged attraction is sufficient to explain the observed anomalous volume distribution of human nucleoli. Overall, our results reveal a potential physical mechanism contributing to coarsening of human nucleoli. Such knowledge expands our picture of the physical behavior of liquid condensates inside the cell nucleus and our understanding of the dynamic nuclear organization.

Developing biopolymer-stabilized emulsions for improved stability and bioaccessibility of lutein

Lutein is essential for infant visual and cognitive development but has low stability and solubility. This study aimed to enhance the stability and bioaccessibility of lutein using oil-in-water emulsions stabilized with biopolymers. Commercially available octenylsuccinylated (OS) starches, including capsule TA® (CTA), HI-CAP®100 (HC), and Purity Gum® 2000 (PG), along with gum Arabic (GA) variants Ticaloid acacia Max® (TAM), TICAmulsion® 3020 (TM), and pre-hydrate gum Arabic (PHGA), were chosen as emulsifiers. By screening the effect of biopolymer concentration and oil volume fraction (Φ), emulsions stabilized with CTA, HC, or TM at 20% and 30% (w/v) concentration and 70% Φ exhibited a gel-like structure and were selected for further assessments. After a week at 25 °C, emulsions stabilized by CTA and HC showed no significant change in droplet size, while TM emulsion exhibited a 1.58-fold increase. At 45 °C, all emulsions exhibited increase in droplet size. Lutein retention is higher in CTA emulsions at both storage temperatures than free lutein. In vitro bioaccessibility of all lutein emulsions was higher than that of free lutein. These findings highlight the superior stability and bioaccessibility of the lutein emulsion stabilized by OS starch, positioning it as a promising carrier to broaden lutein applications in infant foods.

Numerical Simulation of Pyrethrin Aerosol Deposition

Highlights A steady state, laminar CFD model was developed to simulate the airflow inside an aerosol exposure chamber. The CFD model predicted the droplet tracks and deposition of various sizes of aerosol droplets. Larger aerosol droplets had higher deposition efficiency. A Higher flow rate, but still within the laminar flow regime, caused lower deposition efficiency for all droplet sizes. Abstract. Aerosol insecticides (e.g., pyrethrin) are widely used for the control of stored products insects inside food facilities. To optimize pyrethrin aerosol application, computational fluid dynamics (CFD) was used to predict airflow and aerosol transport inside a vertical flow aerosol exposure chamber operated under laminar flow conditions. A discrete phase model in ANSYS FLUENT 2021 R1 was developed, and simulations were conducted to track pyrethrin droplets of various diameters (0.1 to 20 µm) and determine their deposition onto Petri dishes located near the center of the chamber. The deposition efficiency of the different aerosol droplet sizes and the effect of two flow rates (5 × 10-4 m3 s-1 and 4 × 10-4 m3 s-1) on deposition efficiency were determined. The results showed that the predicted deposition of pyrethrin aerosol increased with increasing droplet size, largely due to inertial and gravitational effects. Deposition efficiencies decreased with the higher flow rate—with 0.1% to 96.6% predicted deposition efficiencies for the low flow rate and 0.1% to 93.8% for the high flow rate. Results of this study can be used to improve aerosol application methods for stored product insect control. Keywords: Aerosol deposition, Aerosol insecticide, Computational fluid dynamics, Confused flour beetle, Deposition efficiency, Discrete phase model, Numerical simulation, Particle tracking, Pyrethrins, Stored product insect.

Experimental study on dribbling characteristics of gasoline/biodiesel blends after the end-of-injection

The effects of biodiesel addition on gasoline fuel dribbling process and characteristics after the end-of-injection (EOI) were investigated in a constant volume chamber at different injection pressures and ambient temperatures. The fuel dribbling process was recorded with high spatial and time resolution by using the microscopic shadow imaging technique, and the corresponding dribble velocity, dribble volume and droplet size were extracted. The results showed that the fuel dribbling experienced four typical morphological structures (spray-like, membrane-type, ligament-type, droplets) after the EOI under all the tested conditions. Additionally, increased biodiesel proportion in the blends caused decreased dribble velocity, longer dribbling duration, and increased droplet size, indicating deteriorated breakup and atomization processes of the dribbling flow. Moreover, the higher injection pressure increased the dribble amount but reduced the dribbling duration and droplet size. The increased ambient temperature caused faster evaporation of the dribbling fuel, resulting in a significant decrease in the dribble size. So, these two strategies were believed to be overall favorable to restrain the adverse effect on gasoline fuel dribbling characteristics caused by the addition of biodiesel.

Leptin-dependent differential remodeling of visceral and pericardial adipose tissue following chronic exercise and psychosocial stress.

Obesity is driven by an imbalance between caloric intake and energy expenditure, causing excessive storage of triglycerides in adipose tissue at different sites around the body. Increased visceral adipose tissue (VAT) is associated with diabetes, while pericardial adipose tissue (PAT) is associated with cardiac pathology. Adipose tissue can expand either through cellular hypertrophy or hyperplasia, with the former correlating with decreased metabolic health in obesity. The aim of this study was to determine how VAT and PAT remodel in response to obesity, stress, and exercise. Here we have used the male obese Zucker rats, which carries two recessive fa alleles that result in the development of hyperphagia with reduced energy expenditure, resulting in morbid obesity and leptin resistance. At 9 weeks of age, a group of lean (Fa/Fa or Fa/fa) Zucker rats (LZR) and obese (fa/fa) Zucker rats (OZR) were treated with unpredictable chronic mild stress or exercise for 8 weeks. To determine the phenotype for PAT and VAT, tissue cellularity and gene expression were analyzed. Finally, leptin signaling was investigated further using cultured 3T3-derived adipocytes. Tissue cellularity was determined following hematoxylin and eosin (H&E) staining, while qPCR was used to examine gene expression. PAT adipocytes were significantly smaller than those from VAT and had a more beige-like appearance in both LZR and OZR. In the OZR group, VAT adipocyte cell size increased significantly compared with LZR, while PAT showed no difference. Exercise and stress resulted in a significant reduction in VAT cellularity in OZR, while PAT showed no change. This suggests that PAT cellularity does not remodel significantly compared with VAT. These data indicate that the extracellular matrix of PAT is able to remodel more readily than in VAT. In the LZR group, exercise increased insulin receptor substrate 1 (IRS1) in PAT but was decreased in the OZR group. In VAT, exercise decreased IRS1 in LZR, while increasing it in OZR. This suggests that in obesity, VAT is more responsive to exercise and subsequently becomes less insulin resistant compared with PAT. Stress increased PPAR-γ expression in the VAT but decreased it in the PAT in the OZR group. This suggests that in obesity, stress increases adipogenesis more significantly in the VAT compared with PAT. To understand the role of leptin signaling in adipose tissue remodeling mechanistically, JAK2 autophosphorylation was inhibited using 5 μM 1,2,3,4,5,6-hexabromocyclohexane (Hex) in cultured 3T3-derived adipocytes. Palmitate treatment was used to induce cellular hypertrophy. Hex blocked adipocyte hypertrophy in response to palmitate treatment but not the increase in lipid droplet size. These data suggest that leptin signaling is necessary for adipocyte cell remodeling, and its absence induces whitening. Taken together, our data suggest that leptin signaling is necessary for adipocyte remodeling in response to obesity, exercise, and psychosocial stress.

The Effect of High-Pressure Homogenization Conditions on the Physicochemical Properties and Stability of Designed Fluconazole-Loaded Ocular Nanoemulsions.

The growing interest in high-energy emulsification is a result of its scalability, which is important from an industrial perspective and allows for a more reproducible and efficient production of pharmaceutical formulations. The aim of this study was to evaluate the effect of composition, mainly a fixed surfactant/cosurfactant (Smix) ratio, their concentration, and the parameters of high-pressure homogenization (HPH) processing on the quality and stability of ophthalmic fluconazole-loaded nanoemulsions. After a physicochemical analysis of nanoemulsions containing 20% w/w of oil, as optimal conditions for the HPH process, three cycles at a pressure of 1000 bar were established, obtaining formulations with an average droplet diameter size in the range of 80.63-129.68 nm and PDI values below 0.25. While it was expected that an increasing cosurfactant concentration decreased the droplet size, in the case of formulations containing Tween 20 and 10% w/w of cosurfactants, "over-processing" was observed, identified by the droplet size and polydispersity index increase. Consecutively, the selected formulations were evaluated for in vitro drug release in Franz's cell, antifungal activity, and 30-day stability using NMR spectroscopy. An antifungal activity test showed no significant difference in the antifungal activity between optimal fluconazole-loaded nanoemulsions and a 0.3% aqueous drug solution, but previously, research showed that prepared formulations were characterized by a higher viscosity and satisfactory prolonged release compared to a control. In a 30-day stability study, it was observed that higher HLB values of the used surfactants decreased the stability of the formulations in the following order: Kolliphor EL, Tween 80, Tween 20. The NMR spectra confirmed that Kolliphor EL-based formulations ensured the higher stability of the nanoemulsion composition in comparison to Tween 80 and a better stabilizing effect of propylene glycol as a cosurfactant in comparison to PEG 200. Therefore, the optimization of HPH technology should be focused on the selection of Smix and the Smix:oil ratio in order to prepare stable formulations of high quality.

Adjusting function of camphor on primary metabolism in Cinnamomum camphora stressed by high temperature

Cinnamomum camphora has great economic value for its wide utilization in traditional medicine and furniture material, and releases lots of monoterpenes to tolerate high temperature. To uncover the adjusting function of monoterpenes on primary metabolism and promoting their utilization as anti-high temperature agents, the photosynthetic capacities, primary metabolite levels, cell ultrastructure and associated gene expression were surveyed in C. camphora when it was blocked monoterpene biosynthesis with fosmidomycin (Fos) and fumigated with camphor (a typical monoterpene in the plant) under high temperature (Fos+38 °C+camphor). Compared with the control (28 °C), high temperature at 38 °C decreased the starch content and starch grain size, and increased the fructose, glucose, sucrose and soluble sugar content. Meanwhile, high temperature also raised the lipid content, with the increase of lipid droplet size and numbers. These variations were further intensified in Fos+ 38 °C treatment. Compared with Fos+ 38 °C treatment, Fos+ 38 °C+camphor treatment improved the starch accumulation by promoting 4 gene expression in starch biosynthesis, and lowered the sugar content by suppressing 3 gene expression in pentose phosphate pathway and promoting 15 gene expression in glycolysis and tricarboxylic acid cycle. Meanwhile, Fos+ 38 °C+camphor treatment also lowered the lipid content, which may be caused by the down-regulation of 2 genes in fatty acid formation and up-regulation of 4 genes in fatty acid decomposition. Although Fos+ 38 °C+camphor treatment improved the photosynthetic capacities in contrast to Fos+ 38 °C treatment, it cannot explain the variations of these primary metabolite levels. Therefore, camphor should adjust related gene expression to maintain the primary metabolism in C. camphora tolerating high temperature.

Droplet generation by the oscillation of two spark-generated bubbles near a confined opening

Cavitation bubbles can be both beneficial and detrimental. One of their beneficial applications is to produce droplets as they oscillate near a confined free surface. In this paper, the oscillation of two spark-generated bubbles beneath a confined free surface and the resultant droplet generation are studied numerically using boundary element method. Three different configurations are considered: (i) a vertical cylinder (θ = 0°), (ii) a vertical nozzle (θ = 45°) and (iii) a perforated horizontal flat plate (θ = 90°). The influences of the effective parameters, including the initial pressure and locations of the bubbles, and the configuration geometry on the dynamics of the bubbles, the free surface and the resultant droplet are studied. It was found that by decreasing the inter-bubble distance, the droplet size increases and its pinch-off occurs earlier. In general, the effect of the distance of the upper bubble from the free surface on the droplet behavior is much more significant than that of the inter-bubble distance. Furthermore, through the augmentation of the upper bubble's strength parameter, the droplet size is reduced and the moment of droplet pinch-off is postponed. Finally, the droplet size and its pinch-off time increase from the vertical cylinder to the flat plate case.

Influence of varying oil phase volume fractions on the characteristics of flaxseed-derived diglyceride-based Pickering emulsions stabilized by modified soy protein isolate

This research aimed to create Pickering emulsions using modified soy protein isolate (SPI) as a stabilizer and flaxseed-derived diglyceride (DAG) as an oil phase. The SPI was modified through a process involving both heating and ultrasound treatment. The result indicated that the droplet size of emulsions increased with the increase in oil content (p < 0.05). For instance, the largest droplet size (23 µm) was observed at an oil-to-SPI dispersion ratio of 4:1 ratio (φ = 80), whereas the smallest droplet size (6.39 µm) was noticed at the 1:4 ratio. During the 7-day storage period, the emulsions with a 4:1 ratio (φ = 80) showed the lowest droplet size increase (from 23 µm to 25.58 µm). In contrast, the emulsions with a 1:1 ratio displayed the highest increase (from 19.39 µm to 74.29 µm). Creaming index results revealed that emulsions with a 4:1 ratio (φ = 80) showed no signs of creaming and phase separation than all other treatments (p < 0.05). Backscattering fluctuations (ΔBS) and turbiscan stability index (TSI) showed that emulsions with 4:1, 2:1, and 1:1 oil-to-SPI dispersion ratios had consistent ΔBS curves with higher and TSI curves with lower values. Optical microscopy, confocal laser scanning, and cryo-scanning electron microscopy revealed that emulsions with oil-to-SPI dispersion ratios of 4:1 and 2:1 had well-organized structures with no visible coalescence. Macromorphological and microrheological investigations demonstrated that emulsions with 80% oil content had the highest viscosity, both moduli, elasticity index, macroscopic viscosity index, and the lowest fluidity index and solid–liquid balance values. Moreover, these emulsions were more resistant to centrifugation and storage environments. In conclusion, the study determined that flaxseed-derived DAG-based high internal phase Pickering emulsions (φ = 80) had superior stability, improved viscoelasticity, and better rheological properties.

Suspending droplets beyond the Rayleigh limit: The interplay of acoustic and gravity forces

In this work, we experimentally investigate the suspension behavior of droplets subjected to standing acoustic waves. We focus on the droplet sizes beyond the Rayleigh limit, i.e., when the droplet size is comparable to the wavelength of the acoustic wave. We show that an acoustic field can disrupt the uniform motion of aqueous droplets in oil and cause them to either suspend or settle, depending on the interplay between acoustic and gravity forces. Remarkably, in contrast to droplets within the Rayleigh limit, the critical acoustic power or minimum pressure amplitude required to suspend droplets beyond the Rayleigh limit is dependent on the droplet size. As the droplet size increases, the critical acoustic power increases significantly. Building upon this understanding, a novel sorting method is proposed based on critical acoustic power.

Investigations of spray breakup Rayleigh–Taylor instability via multiphase lattice Boltzmann flux solver

Poor fuel–air mixing of the diesel spray in low ambient temperature and pressure or thin air leads to intricate fuel breakup mechanism near the nozzle, which still remains worth of study. In this study, a pressure-based modified multiphase lattice Boltzmann flux solver (MLBFS) is proposed to accommodate the fuel spray breakup characteristics of multiphase, multicomponent, and large density ratio, in which the source terms of governing equation are modified emphatically for high injection pressure. Therefore, the characteristics of microscopic diesel spray breakup induced by Rayleigh–Taylor instability are investigated, including spray penetration, spray area, and spray arc length. It is revealed that the spray penetration is increased exponentially with the fuel–air density ratio Rρ. Influenced by air resistance and circulation interference, the roll-up vortex, droplet size, and spray area increase with the decreasing of Rρ (corresponding to high ambient pressure). Affected by entrainment and Rayleigh–Taylor instability, the development of the spray arc length experienced three stages: rapid growth, peak, and violent fluctuation, in which the lower Rρ facilitates development. It is concluded that Rayleigh–Taylor instability is favorable for stimulating the spray internal circulation of spray to enhance entrainment with surrounding air, while improving roll-up and breakup in the spray tail region. Such investigation is conductive to better understanding the micro-breakup mechanisms of fuel spray in the spray-induced internal combustion engine.