Increase In Pressure Gradient Research Articles

Flow stability and permeability in a nonrandom porous medium analog

The estimation of the permeability of porous media to fluids is of fundamental importance in fields as diverse as oil and gas industry, agriculture, hydrology, and medicine. Despite more than 150 years since the publication of Darcy's linear law for flow in porous media, several questions remain regarding the range of validity of this law, the constancy of the permeability coefficient, and how to define the transition from Darcy flow to other flow regimes. This study is a numerical investigation of the permeability and flow stability in a nonrandom quasi-tridimensional porous medium analog. The effect of increasing pressure gradient on the velocity field and on the estimation of Darcy and Darcy–Forchheimer coefficients is investigated for three different obstacles radius. The transition from Darcy flow to nonlinear behavior is associated with the formation of jets in the outlet of the porous medium and development of flow instabilities. Different representations of the Reynolds number proved adequate to detect deviation from the linear law. The instantaneous permeability calculated at each pressure gradient was sensitive to flow velocity, in agreement with previous studies stating that permeability cannot be conceptualized as a constant for real flows.

Possible influence of the large-scale environment on extreme waves over the Yellow Sea in boreal spring

The Yellow Sea (YS) is exposed to various weather systems, such as typhoons, monsoon activities, and extratropical cyclones, which can pose a major threat to the adjacent coastal regions through the development of energetic oceanic surface waves. Unusually severe surface wave events in the YS occur with considerable frequency during the boreal spring (March-April-May), but have received less attention compared to winter and summer. This study focuses on the characteristics of spring extreme wave height (EWH) events in the YS during 1979-2022, based on observational and long-term reanalysis datasets. Our analysis shows that extreme waves, i.e. daily maximum heights in the top 5% of all spring days, take about 12 h to build up to the peaks, while they decay more slowly after the peaks. During the extreme events, the Siberian High is found to extend anomalously eastward compared to spring climatology. Such an anomalous extension contributes to the increase of the sea level pressure gradient and the intensification of the surface wind speed in the YS. Meanwhile, in the range of 6 ∼ 24 h following the peaks of the EWH events in the YS, swells induced by strong northerly winds begin to have an impact in the YS. These swells contribute to maintaining higher wave energy levels in the YS for longer after the atmospheric source has been removed. We further explore the large-scale environmental conditions that could provide the predictability of extreme waves in the basin developed by these findings. This study presents implications for assessing the risks associated with extreme waves in coastal regions and for improving coastal management strategies in the YS.

Failure of Surgical Aortic Valve Prostheses: An Analysis of Heart Team Decisions and Postoperative Outcomes.

Objectives: To analyze Heart Team decisions and outcomes following failure of surgical aortic valve replacement (SAVR) prostheses. Methods: Patients undergoing re-operations following index SAVR (Redo-SAVR) and those undergoing valve-in-valve transcatheter aortic valve replacement (ViV-TAVR) following SAVR were included in this study. Patients who underwent index SAVR and/or Redo-SAVR for endocarditis were excluded. Data are presented as medians and 25th-75th percentiles, or absolute numbers and percentages. Outcomes were analyzed in accordance to the VARC-3 criteria. Results: Between 01/2015 and 03/2021, 53 patients underwent Redo-SAVR, 103 patients ViV-TAVR. Mean EuroSCORE II was 5.7% (3.5-8.5) in the Redo-SAVR group and 9.2% (5.4-13.6) in the ViV group. In the Redo-SAVR group, 12 patients received aortic root enlargement (22.6%). Length of hospital and ICU stay was longer in the Redo-SAVR group (p < 0.001; p < 0.001), PGmax and PGmean were lower in the Redo-SAVR group as compared to the ViV-TAVR group (18 mmHg (10-30) vs. 26 mmHg (19-38), p < 0.001) (9 mmHg (6-15) vs. 15 mmHg (9-21), p < 0.001). A higher rate of paravalvular leakage was seen in the ViV-TAVR group (p = 0.013). VARC-3 Early Safety were comparable between the two populations (p = 0.343). Survival at 1 year and 5 years was 82% and 36% in the ViV-TAVR cohort and 84% and 77% in the Redo-SAVR cohort. The variables were patient age (OR 1.061; [95% CI 1.020-1.104], p = 0.004), coronary heart disease (OR 2.648; [95% CI 1.160-6.048], p = 0.021), and chronic renal insufficiency (OR 2.711; [95% CI 1.160-6.048], p = 0.021) showed a significant correlation to ViV-TAVR. Conclusions: Heart Team decisions are crucial in the treatment of patients with degenerated aortic bioprostheses and lead to a low mortality in both treatment paths thanks to patient-specific therapy planning. ViV-TAVR offers a treatment for elderly or intermediate-risk profile patients with comparable short-term mortality. However, this therapy is associated with increased pressure gradients and a high prevalence of paravalvular leakage. Redo-SAVR enables the surgical treatment of concomitant cardiac pathologies and allows anticipation for later VIV-TAVR by implanting the largest possible valve prostheses.

Propagation Characteristics of Initial Compression Wave Induced by 400 km/h High-Speed Trains Passing through Very Long Tunnels

When high-speed trains enter tunnels, an initial compression wave is generated. As the compression wave propagates at the local speed of sound to the tunnel exit, it radiates into the surrounding environment, forming micro-pressure waves (MPWs). MPWs create sonic booms, resulting in significant environmental issues. The magnitude of the micro-pressure waves is directly proportional to the pressure gradient of the compression wave at the tunnel exit. The nonlinear effects of the initial compression wave during propagation lead to a significant increase in pressure gradient. Therefore, the propagation characteristics of the initial compression wave during the tunnel are the crucial factor affecting the amplitude of MPWs. Based on the one-dimensional compressible unsteady non-isentropic flow model and the improved generalized Riemann variable characteristic method, this paper researched the propagation and evolution characteristics of an initial compression wave generated when 400 km/h high-speed trains enter tunnels with three portal shapes: (no tunnel entrance hood (no hood), an oblique, enlarged tunnel entrance hood (type A), an enlarged equal-section non-uniform opening hole tunnel entrance hood (type B)). The results show that when the initial compression wave propagates inside very long tunnels, the pressure gradient of the compression wave exhibits a trend of initially increasing and then decreasing with the increase in propagation distance. When the pressure gradient of the compression wave reaches its maximum value, the corresponding propagation distance is the steepening critical distance. For no tunnel entrance hoods, type A tunnel entrance hoods, and type B tunnel entrance hoods, the steepening critical distances are 5 km, 6 km, and 16 km, respectively. The steepening critical distance shortens with increasing train speed. Steady friction and unsteady friction effects mainly affect the pressure amplitude and pressure gradient during compression wave propagation, respectively. At lower ambient temperatures, the nonlinear effects in compression wave propagation are significantly enhanced. The mitigation effects of type A tunnel entrance hoods and type B tunnel entrance hoods on pressure gradient reduction are mainly concentrated within 4 km and 12 km, respectively. It is necessary to determine the optimal matching relationship between the tunnel entrance hood and tunnel length based on the characteristics of compression wave propagation to ensure their mitigating performance is maximized.

Analysis of electromagnetic and radiative heat source on tangential hyperbolic fluid under Arrhenius kinetic with convective cooling

The global threat of environmental degradation from harmful waste discharge is evident, leading to unusual diseases and natural disasters. Some of these toxic emissions result from human activities, such as the incomplete combustion of hydrocarbons. As such, this study aims to explore the analysis of electromagnetic and radiative heat sources on tangential hyperbolic fluid under Arrhenius kinetic with convective cooling. The transformed momentum and heat equations are solved using a rigorous computational approach called the Galerkin integration approximation with weighted residual method. This computational methodology ensures the reliability and accuracy of the results. Various graphs illustrate the results, showing parametric sensitivity profiles for the velocity, temperature, skin friction, thermal gradient, Bejan, and entropy generation. As noticed from the outcomes, electric field loading increases heat dispersion by about 3.25 % as heat source terms are enhanced. Increasing magnetic field, radiation, and electric field loading parameters strengthened thermodynamic equilibrium and minimized entropy generation. The tangential hyperbolic combustion process is 6.11 % increased with rising Brinkman number and electric field loading terms. The flow rate and temperature field are increased to the peak along the middle of the channel for increasing pressure gradient.

Experimental study on radial suction flow and its effect in water vortex unit

A water vortex unit is a non-contact adsorption unit that utilizes water as a flowing medium. Negative pressure is generated on the adsorbed surface through the high-velocity rotation of the fluid, resulting in suction force. In comparison to the air vortex unit, the water vortex unit exhibits a substantial increase in suction force and has the capability to deliver greater power. However, the presence of the central bubble in the water vortex unit weakens the suction force. To address the impact of the central bubble, a suction hole was introduced on the vortex unit to remove them. Experimental results indicate that solely removing the central bubble has almost no effect on the radial pressure gradients in the gap flow path and chamber center of the water vortex unit. However, in the cylindrical neighborhood, the radial pressure gradient increases, leading to a certain degree of improvement in suction force. Further increasing the suction flow rate induces inward radial flow within the vortex chamber. This flow field further enhances the suction force. To analyze the reasons for this pressure distribution, we indirectly obtained the radial velocity distribution by examining the relationship between the pressure gradient and tangential velocity. The results of the tangential velocity distribution indicate that the radially inward suction flow significantly increases the rotational velocity of the fluid in the chamber center, enhancing the centrifugal inertial effect. This further reduces the negative pressure, resulting in a significant improvement in the suction of the vortex unit.

#1397 Predictive factors for bioprosthetic valve stenosis and prognostic factors for survival following TAVR in hemodialysis patients with severe AS

Abstract Background and Aims Transcatheter aortic valve replacement (TAVR) is a promising option for the treatment of severe aortic valve stenosis (AS) in patients undergoing hemodialysis. Although the incidence of bioprosthetic valve deterioration (SVD) after TAVR has been reported to be lower than after surgical aortic valve replacement (SAVR), hemodialysis itself is still associated with a high risk of SVD. Until now, the factors that determine the prognosis of TAVR in hemodialysis patients were unknown. We previously reported that preoperative hypomagnesemia was correlated with an increase in postoperative mean aortic valve pressure gradient (MPG), an index of bioprosthetic valve stenosis as one of the indicators of SVD, in hemodialysis patients (Ren Fail. 2022 Dec;44(1):1083-1089). However, the study had a limited sample size of 24 cases, which raised concerns about statistical power. Therefore, we re-evaluate predictors of SVD and life expectancy in a larger number of post-TAVR hemodialysis patients. Methods From April 2012 to November 2021, all 100 hemodialysis patients treated with TAVR at Osaka University Hospital were included in the analysis. Pre- and post-operative demographic and laboratory data were analyzed by linear mixed-effects model and cox proportional hazards model. Results During the follow-up period (maximum 7 years), 4 out of 100 patients required re-TAVR (valve-in-valve) due to valve stenosis. The MPG increased over time with the lower preoperative serum Mg concentration (linear mixed-effects mode; +1.40 mmHg/year per 1mg/dl lower in Mg, p=0.006). However, serum calcium, phosphate, and intact PTH levels had no significant effect on the increase in MPG. In addition, a higher preoperative left ventricular ejection fraction (LVEF) was associated with a lower risk of death in a multivariate Cox proportional hazards model (hazard ratio [HR] 0.97 per 1% increase in LVEF; P=0.02). Conclusions Consistent with our previous report, preoperative hypomagnesemia was associated with increased MPG after TAVR. In addition, preoperative low cardiac function (LVEF&amp;lt;40%) may be a risk factor for postoperative mortality in dialysis patients. This was a single-center observational study, and the number of patients was still small, so our data may not be necessarily applicable to every patient. Further research is needed to identify a prognostic predictor of SVD and mortality, that will lead to the prevention of adverse outcomes in hemodialysis patients.

Heat and concentration analysis of two-layered muco-ciliary third grade fluid flow in human airways

Understanding the mechanisms involved in the movement and clearance of mucus within the human airways is important from a physiological perspective. A mathematical model of muco-ciliary two-layered fluid flow in a finite two-dimensional channel is proposed. Due to the presence of both the airway ciliary layer (ACL) and the periciliary liquid layer (PCL) in airways epithelial cells, the two-layered model is adopted. The third grade fluid models is used to characterize the viscoelastic nature of mucus secreted in the airways. The mathematical modeling of two-layer flow problem is simplified by using long wavelength and small Reynolds number approximation. A formulated set of partial differential equations (PDEs) is solved for series-form solutions of velocity, temperature, concentration, and pressure gradient by using the Adomian decomposition method (ADM). The analysis delineated that with an increase in pressure gradient at airways entrance ξ the velocity and temperature increases while concentration decreases. Deborah numbers impact ACL and PCL velocities differently, with De(A) influencing flow direction and De(P) causing fluid to flow faster in the forward direction. It also emphasizes the significance of the rate of thermal diffusion, viscous dissipation, and relaxation time. The results showed that the suggested two-layered muco-ciliary model provides a better description of mucus transport in the human airways. The pressure gradient at the airways entrance has a significant impact on mucus transport through the airways.

Long-term Outcomes With Expanded Polytetrafluoroethylene Valved Conduits in Pediatric Patients

BackgroundThe expanded polytetrafluoroethylene (ePTFE) valved conduit (VC) has been reported for pulmonary valve replacement (PVR). The purpose of this study was to review long-term outcomes of our trileaflet ePTFE VC. MethodsThis multicenter study was performed with institutional review board approval from each institution. Our VC is fashioned from commercially available ePTFE tube grafts (for the conduit) and 0.1-mm-thick ePTFE membrane (for the trileaflet material). The patients were followed up in our clinic. Valve function was assessed by echocardiography in the operating room and at follow-up clinic visits after implantation. ResultsFifty-five patients received ePTFE VC between 2012 and 2023 (16-28 mm in diameter). Patients’ age at the time of implantation ranged from 6 months to 20 years (median, 7.5 years). Clinical follow-up ranged from 4 days to 10.1 years (average, 3.6 years). There were no hospital deaths. There were 2 non–valve-related late deaths. There have been no cases of endocarditis. Two patients required balloon dilation for the distal pulmonary artery stenosis, and 1 patient required residual ventricular septal defect closure. Five patients have received transcatheter PVR (TPVR) because of increased pressure gradient across the VC. Freedom from TPVR at 10 years was 90%. No valves required explantation or surgical replacement. ConclusionsCompared with historical data for other PVR options, our ePTFE VC shows excellent long-term performance and, when required, provides an easily accessible “landing zone” for TPVR. Our technique is easily learned, is reproducible, and can be a valuable option for surgeons performing PVR in pediatric patients.

Evaluation and clinical significance of contrast-enhanced ultrasound on changes in liver blood flow perfusion after TIPS surgery.

To investigate the clinical value of contrast-enhanced ultrasound in the prediction of hepatic encephalopathy (HE) in patients with hepatitis B cirrhosis after intrahepatic portal-systemic shunt via jugular vein. In this retrospective study, we collected data from 75 patients with hepatitis B, cirrhosis, and portal hypertension who underwent jugular intrahepatic portosystemic shunt from February 2019 to February 2022. The diagnostic instrument used was the TOSHIBA Aplio500 color Doppler ultrasound with contrast-enhanced ultrasound capabilities. The trial group comprised 20 patients with HE within 3 months postsurgery, while the control group (CG) included 55 patients without HE within the same postoperative period. All patients underwent various examinations before and within 48 hours after surgery, including observation of liver and spleen size and stent position, as well as assessment of blood flow direction in portal and hepatic veins. Subsequently, contrast-enhanced ultrasound was employed to examine and observe perfusion changes of contrast agents in hepatic veins, hepatic arteries, and portal veins (PV). Changes in PV pressure gradient, intrahepatic, and stent blood flow perfusion (BFP) were explored in both postoperative trials and CGs. The trial group exhibited higher BFP volume, PV pressure gradient difference, and percentage decrease compared to the CG. A weak positive correlation was observed between blood flow within the liver stent and PV pressure gradient difference, as well as the percentage decrease in PV pressure gradient. The correlation coefficient between blood flowing perfusion volume within the stent and the difference in PV pressure gradient was R = 0.415 (P = .000). The correlating coefficient between BFP amount within the stent and the percentage decrease in PV pressure gradient was R = 0.261 (P = .027). The area under the receiver operating characteristic curve for stent perfusion volume, difference in PV pressure gradient, and percentage decrease in PV pressure gradient was 0.691, 0.759, and 0.742, respectively. An increase in PV pressure gradient accelerates blood flow within the stent, predisposing to HE. Changes in hepatic BFP following transjugular intrahepatic portosystemic shunt can effectively predict the occurrence of HE, demonstrating significant clinical relevance.

Fractal study on the nonlinear seepage mechanism during low-permeability coal water injection

In the initial stage of coal seam water injection, due to the high density and low permeability of coal bodies, an obvious startup pressure gradient is observed in relation to water seepage; this phenomenon leads to low-velocity nonlinear seepage. In this paper, we study the nonlinear seepage law and the main influencing parameters of the water injection process. First, based on the startup pressure gradient, the nonlinear seepage equation, and the fractal theory, we formulated a nonlinear seepage model of coal seam water injection that considered the fractal characteristics of a complex coal structure. Subsequently, we carried out coal seam water injection and gas radial seepage experiments under a high overburden pressure, obtaining the startup pressure gradient according to the seepage characteristics and the changes of dynamic parameters. Then, the dynamic parameters of water injection, the structural parameters of the coal samples, the physical parameters, and the fractal dimension were substituted into the theoretical model to obtain the theoretically calculated value. Finally, through comparative analysis of theoretical and experimental startup pressure gradient calculation results, it is found that with the increase in the overburden pressure, the permeability of coal and the connectivity effect are reduced, while the fracture tortuosity and the startup pressure gradient increase. Moreover, coal seam permeability does not seem to be the single decisive factor for the nonlinear startup pressure gradient.

Evaluation of Recovery of Tight Sandstone Gas Reservoirs Based on a Seepage Steady-State Model

As an important indicator for measuring the effectiveness and level of oil and gas field development, recovery rate has always been a focus in the research of oil and gas fields. Reservoirs of tight sandstone gas formations have significant characteristics of low porosity, high permeability, and high water content, which leads to greater difficulty in their development and makes it challenging to evaluate the recovery rate. Newtonian mechanics, as an important component of the mechanical system, is an innovative application of classical mechanics in the field of seepage mechanics when applied to the two-phase flow of gas and water. Firstly, starting from the perspective of mechanics analysis, we derive a steady-state model for gas–water two-phase infiltration and obtain the productivity equation based on this model. Then, according to the steady-state model, we establish a method to calculate the effective control radius of gas reservoirs under different production conditions and reservoir physical properties. Finally, using Matlab 2018a programming based on the productivity equation, we calculate the gas recovery under different conditions during constant pressure drop production and constant production rate production. The results indicate that the effective control radius of the reservoir decreases with an increase in the economic ultimate daily gas production, increases with an increase in production pressure difference, slightly decreases with an increase in startup pressure gradient, and correspondingly increases with an increase in microtube radius and quantity. Regardless of whether it is production with a fixed pressure drop or production with a fixed production rate, the gas recovery decreases as the production pressure drop and bottomhole abandonment pressure increase, but it increases as the proportion of the single-well control radius increases. In production with a fixed pressure drop, the gas recovery remains consistent across different reservoir quality indices. However, in production with a fixed production rate, the gas recovery initially increases rapidly and then gradually slows down as the reservoir quality index increases, and there is an obvious critical permeability (0.1 mD). The research findings are based on the mechanical analysis of porous media, delving into the laws governing fluid flow during infiltration. The derived infiltration model can be used to calculate the effective control radius and evaluate recovery rates, providing practical guidance for reservoir development.

Effects of implantation height on the performance of a redo transcatheter aortic valve replacement using a balloon-expandable valve

ObjectiveThe use of the transcatheter aortic valve in low-risk patients might lead to a second intervention due to the deterioration of the first 1. Understanding the implantation height is key to an effective redo transcatheter aortic valve replacement treatment. MethodsThe effects of implantation height on the performance of a balloon-expandable valve within a self-expandable valve were assessed using hemodynamic testing and particle image velocimetry. The hemodynamic performances, leaflet kinematics, and turbulent shear stresses were measured and compared. ResultsWhen a second balloon-expandable valve was positioned at varying heights relative to the first self-expandable valve, the leaflet motion of the first valve transitioned from free opening and closing to overhanging, and eventually to being entirely pinned to the stent, forming a neo-skirt. When the leaflets of the self-expandable valve could move freely, a decrease in regurgitation fraction was observed, but with an increased pressure gradient across the valve. Flow visualization indicated that the overhanging leaflets disrupted the flow, generating a higher level of turbulence. ConclusionsThis study suggests that the overhanging leaflets should be avoided, whereas the other 2 scenarios should be carefully evaluated based on an individual patient's anatomy and the cause of failure of the first valve.

A Model for Simulating the Upward Flow of a Viscous Fluid in a Fracture Network

Fluid migration in a fracture network plays an important role in the oil accumulation mechanism and hence is key to oil exploration. In this study, we build a model by combining one-dimensional (1D) Navier–Stokes equations, linear elastic equations, and energy equations, and validate the model by reproducing the thickness profile of a fluid-driven crack measured in an experiment. We employ this model to simulate the upward flow of viscous fluid in a single fracture during hydrocarbon migration. The simulation suggests that the parameters of both the fluid and the surrounding rock matrix, as well as the boundary condition imposed on the fracture outlet, affect the upward flow in the fracture. We then extend our model from the single fracture to the bifurcated fracture and the fracture network by maintaining homogeneous pressure and mass conservation at the connection of the channels. We find that the increase in network complexity leads to an increase in the inlet pressure gradient and inlet speed, and a decrease in the outlet pressure gradient and outlet speed. The effective area where the fluid is driven upward from the inlet to the outlet is offset toward the inlet. More importantly, the main novelty of our model is that it allows us to evaluate the effect of inconsistencies in individual branch parameters, such as matrix stiffness, permeability, temperature, and boundary conditions, on the overall upward flow of viscous fluid. Our results suggest that the heterogeneity enforces the greater impact on the closer branches.

Analysis of MHD boundary layer flow of a viscous fluid past a stretching sheet employing the Legendre wavelet method

The current work introduces a novel approach to analyse the non-linear Falkner–Skan equation from fluid dynamics by utilising the Legendre wavelet method. In this paper, we relied on the Legendre wavelet to generate a new functional integration matrix and presented a novel approach known as the Legendre wavelet approach (LWA). The primary goal of this study is to provide a unified method via LWA to compute an approximate solution to a non-linear differential equation for a viscous fluid over a stretching sheet. The Legendre wavelet method has been used for the first time to solve the stretching sheet problem. A viscous fluid across a stretching sheet has been explored for its stable laminar magnetohydrodynamic (MHD) flow, transportation of mass and heat characteristics in the context of an intermittent magnetic field. By specifying appropriate non-dimensional parameters, the governing boundary layer equation evolves into a dimension devoid of the Falkner–Skan equation. Using the Legendre wavelet approach, the resulting nonlinear equation modified to an algebraic equation is addressed. With LWA, the undershoots and overshoots for a set of factors are noted. The boundary layer thickness appears to decrease with increasing pressure gradient and magnetic field parameters. The graphical interpretation of the boundary layer flow’s features is done for a range of physical parameter values. To ensure the accuracy of the findings, local skin friction has been tracked and contrasted with other techniques that are already documented in the previous research.

Extended landslide velocity and analytical drag

The landslide velocity plays a dominant role in estimating the impact force and devastated area. Here, based on Pudasaini and Krautblatter (Earth Surf Dyn 10:165–189, 2022. https://doi.org/10.5194/esurf-10-165-2022), I develop a novel extended landslide velocity model that includes the force induced by the hydraulic pressure gradient, which was neglected by all the existing analytical landslide velocity models. By a rigorous conversion between this force and inertia, which facilitates constructing exact analytical solutions for velocity, I develop two peer systems expecting to produce the same result. However, this contradicts with our conventional wisdom. This raises a legitimate question of whether we should develop some new balance equations such that these phenomena can be better explained naturally. I compare the two velocity models that neglect and include the force induced by the hydraulic pressure gradient. Analytical solutions produced by the two systems are fundamentally different. The new model is comprehensive, elegant, and yet an extraordinary development as it reveals serendipitous circumstance resulting in a pressure–inertia paradox. Surprisingly, the mass first moves upstream for quite a while; then, it winds back and continues accelerating down slope. The difference between the extended and simple solution is significant, and widens strongly as the force associated with the hydraulic pressure gradient increases, demonstrating the importance of this force in the landslide velocity. The viscous drag is an essential dissipative force mechanism and plays an important role in controlling the landslide dynamics. However, no explicit mechanical and analytical model exists to date for this. The careful sagacity of the graceful form of new velocity equation results in a plain, yet mechanically extensive, analytical model for viscous drag, the first of this kind. It contains several physical and geometrical parameters, and evolves dynamically as it varies inversely with the flow depth. A dimensionless drag number is constructed characterizing the drag dynamics. Importance of the drag model is explained. In contrast with the prevailing practices, I have proved that drags are essentially different for the expanding and contracting motions. This is an entirely novel revelation. Drag coefficients are close to the empirical or numerical values often used in practice. But, now, I offer an innovative, physically founded analytical model for the drag that can be instantly applied in mass flow simulations.

Effect of Displacement Pressure Gradient on Oil–Water Relative Permeability: Experiment, Correction Method, and Numerical Simulation

Relative permeability is a fundamental parameter affecting reservoir development performance analysis. During the development of oil and gas fields, the displacement pressure gradient changes with time and space. This paper studies the effect of displacement pressure gradient on relative permeability. The oil–water relative permeability curves of a Bohai Oilfield under different displacement pressure gradients are obtained through experimental analysis. Based on the experimental data, a correction model of the permeability curve is established by regression of the Willhite model parameters. The correction model is introduced into the black oil numerical simulation, and the production performance and remaining oil are compared and analyzed. The results show that the displacement pressure gradient can have an obvious impact on the relative permeability curve. As the displacement pressure gradient increases, the two-phase span of the relative permeability curve increases, the oil displacement efficiency increases, and the water relative permeability increases. The relative permeability curves under different displacement pressure gradients can be accurately characterized by the Willhite model. The consideration of the displacement pressure gradient has an obvious impact on numerical simulation results. The conventional method of using a fixed relative permeability curve cannot truly reflect the production performance and the remaining oil distribution. This paper proposes a set of realization methods including obtaining laws from experiments, utilizing the empirical model to correct, and simulating to characterize reservoir changes.

Rates and Predictors of Structural Valve Degeneration and Failure of Trifecta Bioprosthetic Valve Over a 5-year Follow-up Period: A Single-center Experience.

The Trifecta bioprosthetic valve has been commonly used for surgical aortic valve replacement (SAVR). Multiple studies have been done to define the rate of structural valve degeneration (SVD) and failure (SVF), but the outcomes are still debatable. Therefore, we aim to conduct this single-center study to estimate the rate and predictors of SVD/SVF. This retrospective observational cohort single-center study was conducted between 2014 and 2019 among Trifecta SAVR patients. Data were patient's characteristics collected from electronic medical records at baseline and follow-up (3-5 years). Statistical analysis was performed with a significance level of P ≤ 0.05. A total of 271 eligible patients were identified. Most of our sample were males (57.9%), with a mean age of 71.1 ± 10.6 years. The mean baseline preoperative ejection fraction (EF) was 53.0%, with no change (P = 0.88) in the immediate postoperative EF (53.6%). A most recent follow-up EF revealed a significant increase of EF (55.2%), P = 0.01. Furthermore, there was a significant increase from peak velocity to PVMRE (mean difference [MD] ± standard error of mean (SEM) [0.15 ± 0.04], P < 0.01), an increase in pressure gradient (PGIPE) to PGMRE (MD ± SEM [1.70 ± 0.49], P < 0.01), and a decrease in Doppler velocity index (DVIIPE) to DVIMRE (MD ± SEM [-0.037 ± 0.01], P = 0.01). Regarding the SVF rate, 13 (4.8%) patients had failed valves requiring replacement throughout the study period. Over a 5-year follow-up period, 4.8% had SVF with an SVD of 23.2%, with the majority of SVD not being clinically significant except in six patients. These results corroborate with a previously published study suggesting a bad clinical outcome of Trifecta valve placement.

Two-relaxation-time lattice Boltzmann model of the velocity profiles and volumetric flow rate of generalized Newtonian fluids in a single-screw extruder

Single-screw extruders and injection molding machines are essential equipment in polymer processing. It is of great importance for the optimization of operating parameters and the design of extrusion screw to predict the throughput of an extruder and the metering time of an injection molding machine according to the geometric parameters of the screw, operating parameters, and the rheological behavior of materials. Most polymer melts exhibit non-Newtonian behavior. The lattice Boltzmann method has many advantages in simulating the flow of non-Newtonian fluids. Herein, the dimensionless velocity profiles and dimensionless volumetric flow rate of generalized Newtonian fluids in a screw channel have been studied using the two-relaxation-time lattice Boltzmann method (TRT–LBM). The numerical results of power-law fluids are in good agreement with the analytical solutions, which verifies the validity of TRT–LBM. Through research, the change rule of the dimensionless volumetric flow rate of Bingham fluids with dimensionless pressure gradient has been obtained. It was found that the rheological properties of polymer melts and the dimensionless pressure gradient significantly affect the dimensionless velocity profiles and dimensionless volumetric flow rate. The dimensionless volume flow rate has some unexpected changes with the increase of the dimensionless pressure gradient. This study can provide theoretical guidance for the optimization of operating parameters and the design of extrusion screws.

Flow-dependent regulation of rat mesenteric lymphatic vessel contractile response requires activation of endothelial TRPV4 channels.

The objective of our study is to evaluate the involvement of the transient receptor potential vanilloid 4 (TRPV4) in the alteration of lymphatic pumping in response to flow and determine the signaling pathways involved. We used immunofluorescence imaging and western blotting to assess TRPV4 expression in rat mesenteric lymphatic vessels. We examined inhibition of TRPV4 with HC067047, nitric oxide synthase (NOS) with L-NNA and cyclooxygenases (COXs) with indomethacin on the contractile response of pressurized lymphatic vessels to flow changes induced by a stepwise increase in pressure gradients, and the functionality of endothelial TRPV4 channels by measuring the intracellular Ca2+ response of primary lymphatic endothelial cell cultures to the selective agonist GSK1016790A. TRPV4 protein was expressed in both the endothelial and the smooth muscle layer of rat mesenteric lymphatics with high endothelial expression around the valve sites. When maintained under constant transmural pressure, most lymphatic vessels displayed a decrease in contraction frequency under conditions of flow and this effect was ablated through inhibition of NOS, COX or TRPV4. Our findings demonstrate a critical role for TRPV4 in the decrease in contraction frequency induced in lymphatic vessels by increases in flow rate via the production and action of nitric oxide and dilatory prostanoids.